GB won't see new instruments

Hi guys,
I'm sure this on is simple however it's got me stumped - I've followed forum leads however I still have the problem.
I've got new instruments and fx, I think I've installed them in the right folders in the library, sound/banks for instruments and components for fx.
I am able to use the fx however when I select a software instrument and go into Edit, Sound Generator, my new instruments are not there.
Can someone please help with this?I might be doing something basic wrong, I must have missed something!
Thanks a tonne,
Matthew

I have the same problem with EXS24 instruments, either just copied to Library/Application Support/Garageband/Instrument Library or using an installer.
Need my Boldt stuff!

Similar Messages

Won't see new memory

I've got a new 8-core. Just installed a 2 gig memory kit from Crucial and the machine is not seeing it. The slots(DIMM3) that I put them in is showing as "empty". Crucial sent cards with this info on the static packet: 1GB 240 PIN 128Mx72 DDrs PC2-5300 Fully Buffered. Are these the right ones and if so, why won't it recognize it?

You install pairs on the same Riser, not 'across' both Risers.
When buying from Crucial, use their memory selector.
Make sure fully seated.
You should have something like this when it arrived.
Riser A: 512MB 512MB
riser B: empty
What I would do now is ut 2 x 1GB in Riser B slots 1 and 2, or on top in 3 and 4.
You would be to put it in "B" empty Riser and put that in the top slot, and move the 2 x 512MB to bottom.
Ideal: to have 2 x 1GB on both Risers for 4GB plus 2 x 512MB in slots 3 & 4 on top Riser.

Logic 8 not seeing new instruments

I'm beginning to think that Logic didn't install correctly on my Mac. When I first installed it, I didn't have a ton of space, so I installed what I needed at minimum. Then later I got a bigger drive, moved it, installed more instruments, and everything seemed fine. However, I noticed that when I make a new track for a software instrument, the folder labeled 06 Pop Strings has completely different instruments than that on my drive in the logic support folder. Similarly, if I add any new exs. files to the sampler instruments folder, Logic doesn't see those at all.
Should I uninstall Logic (latest version of Logic 8 ) and reinstall?

seems to be working now.

ImageCapture app won't see new pictures shot on iPhon after update to 4.1

I updated my iPhone 3G from 3.1 to 4.1 and got a slower and buggy phone now.
When I connect to PC or Mac to download new pictures made by iPhone, it is impossible to see them with the usual "ImageCapture app".
The new pictures are seen on iPhone but not on Computer....
The only way to download them is to e-mail the pictures Is this Bug known?? How I restore my iPhone3g to a usable phone now??? shame on apple - next time better no to update

OK I gotcha!
I changed the default application from Imagecapture to iPhoto
I connected my iPhone
I opened with iPhoto and - after a long wait - the latest pictures appeared in iPhoto
then I went back to Imagecapture and suddenly the latest pictures appeared too.
I noticed that the new photos has been named with lower number than expected, so having order by name made the latest pictures "invisible"
I switched to ordering by date and I found them
I wonder only why suddenly, after upgrading from 3.1 to 4.1, the names of pictures aren't progressive but went back from IMG_3248.jpg to IMG_1745.jpg
did I overwrite older photos?

10.4 Install disk won't see new hard drive

My 10.5.6 drive is dying so I replaced it with a brand new drive. I bought my computer just after the 10.5.0 upgrade, so it came with two 10.4 disks and a 10.5 upgrade disk.
When I insert 10.4 disk 1 and boot, I get to the point where I am asked to select a drive. Nothing is showing. My hard drive is not recognized.
There is only one setup path. There is no way to use Utility or any other program. There are no tabs, options or anything else but this setup path. OsX 10.4 Disk 2 is not recognized. The OSX 10.5 disk is not recognized.
Any suggestions are greatly appreciated.

1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the Erase tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Highlight the drive, select Partition Tab, then Format type... MacOS Extended Journalled... after completion hopefully you'll be able to install.

My wife and I have shared one iTunes account for 6 years. We want to create our own Apple IDs, so when we sync to our new iMac we won't see each others contacts, photos, calendar, music, etc. Is there a way to move music/apps from one ID to a new ID?

My wife and I have shared one iTunes account for 6 years. We want to create our own Apple IDs, so when we sync to our new iMac we won't see each others contacts, photos, calendar, music, etc. Is there a way to move music/apps from one ID to a new ID?

JoeyV325 wrote:
Is there a way to move music/apps from one ID to a new ID?
No.
One of you create a new AppleID and one use the existing AppleID.
But you can still use the items in each iTunes library.
Create separate computer logins for each of you.
This will give you each your own data. Contacts, calendars, photos, etc. (and your own iTunes library).

New MBP won't see Panasonic HVX

Hello,
I have a new MBP and a Panasonic HVX 200. When I try to connect the camera to the computer (with an adapter cable) the computer won't see the camera. It still comes up on my old iMac (via 400). Any thoughts on what the fix is?
Thanks.
Wolf

Wolfwill23: Sounds like a bad cable or adapter. If you're using the same 400->400 cable to connect the camera to the iMac, and adding a 400->800 adapter when connecting to the MBP, then the adapter is probably bad. If you're using a 400->400 cable with the iMac and a 400->800 cable with the MBP, then the latter cable is suspect.

Lost New iPod. Mac Won't See Old iPod.

I recently bought a new iPod and gave it a different name in iTunes. A few days ago I lost it. Now my Mac won't see my previous 4th Gen iPod. Any suggestions. Tried reset. Tried reloading iTunes.

I have a 1st or 2nd gen Ipod that uses Firewire and when I update my iTunes it shut out my ipod and now neither my G4 or G5 recognizes my ipod. I can't use the ipod reset utility because computer wont acknowledge it. I look in System Profiler and under Firewire computer knows it's there but wont bring it up on the desktop or itunes. I tried using USB but that was crap. Help

TS5221 my IMAC won't see my new iphone5S?

I plug it in just like the I Phone 4S and my IMAC won;t see it as a device? Also the transfer they did at the store lost all my inforamation? Ihad to set up all my emails again?? This never happened when I bought the Iphone 4S.

Hi - is the Firewire drive a Western Digital MyBook? That's what I have and have exactly the same problem. I've got a late 2009 iMac and the only way it'll connect and be seen is via USB. The drive will happily connect to my previous gen iMac, it just seems it won't talk to the 27 inch via Firewire.
I did some searching on this 18 months ago and found others with the same problem so I've settled for USB. It does mean that via USB I can use it as a bootable clone if I have any problems with the 27" (I don't think the WD MyBook can boot via Firewire even if it could see the drive - could be wrong on this bit though ).

ThinkPad Bluetooth Sees Other BT Objects, but Won't See My BT Mouse

My ThinkPad T420S Bluetooth is happily paired with my BT Printer and with a ThinkPad Bluetooth Mouse. It will also "see" my BlueTooth phone when I make the phone's BT discoverable. When I tried to pair it with a new Lenovo BT Mouse or with a new Targus Bluetooth Comfort Laser Mouse by using Bluetooth's "Add Device" Box, however, neither mouse would appear in the "Add Device" box.
I have a ThinkPad 420S, Windows 7, 64 bit, Microsoft Bluetooth Enumerator (driver version 6.1.7601.17889) and ThinkPad Bluetooth 3.0 (driver version 6.5.1.4500). The Device Manager says that my Bluetooth is working properly.
When my ThinkPad failed to "see" a new Lenovo ThinkPad Laser Mouse, I assumed that the new mouse must be faulty and returned it. But now that it won't see a new Targus BT Comfort Laser Mouse, either, I'm puzzled. In both cases, the mice had new batteries.
What baffles me is that my ThinkPad's bluetooth can see other discoverable BT devices -- including my old Lenovo BT Laser Mouse, which I was trying to replace because the left button has started to get temperamental.
Puzzling, no? Any suggestions?

Upon further research I have learned that A2DP is not supported with any OSX 10.4.11. I think using Jack might be as close as I can get.

Extension Manager won't See My products?

Hello,
I am running windows 7 64bit and have the CS5 Master suite. Due to low disk space I installed the suite on an external drive which the computer saw as (I) Later I installed a Card reader and it changed all my drive letters, so now the hard drive is seen as (L). For awhile a was able to use Photoshop or any of the programs until I figured out how to change the path in properties to go to the (L) Drive instead of looking for a non existant (I).
Now I can open the products, but the Extension manager won't see them at all and when I try to install a new purchase or download I get this: http://prntscr.com/spmmq and this is the version I am using http://prntscr.com/spn0a, I do have CS6 as well, but it crashes 2-3 times a day from random things and I have a lot of stuff my photoshop has to load, so it takes almost 1.5 hours to get back up after a crash.. grrr!!!
I tried downloading CS5 Extension manager to reinstall it, but when I did that it was forcing the installation the the non existant drive (I) I couldn't change the path and when I went to unistall the Extension Manager, there was no option for it to be removed??
So the question is... is there a way to have my extension manager find the products on the (L) drive???
Thank you for any help,
J

using the Microsoft BlueTooth driver is a requirement for Desktop Manager, not an issue. Please read task 2 of the following article from the public knowledge base:
KB04132 How to set up Bluetooth connectivity between a BlackBerry smartphone and BlackBerry Desktop Software
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Why won't my new Airport Extreme recognize my USB Hard drive? My MacBook recognizes it. I already have had a great deal of trouble connecting my printer to print wirelessly, but finally resolved that. Now I want to add the external drive with a USB por

Why won't my new Airport Extreme recognize my USB external hard drive. I put a USB port on the base station, and the system recognizes my printer. When I click on disks - it lists my printer, and when I click on Printers it lists my printer. What do I need to do to get it to recognize the external drive? BTW, the MacBook recognizes it, no problem. I have erased it and reformatted it. I am running the new Lion OS. Any help is appreciated.

Yes, I saw a post on one of these threads about a powered USB hub so I ran over to Office Depot and picked one up. I was finally able to see the HD in the Airport Utility. Yay!

Mac Book Pro won't see my iTunes Library on an external drive

I have a brand new Mac Book Pro and my iTunes Library is on an external drive. My computer won't see this Library even if I change the location under Preferences. All I can see are my purchases from the iTunes Store on my iCloud. I don't want to clutter up my MBP with my iTunes Library so what should I do?
I'm running Yosemite and latest iTunes
Thanks for any help
Les

Really a library, or just media? A library is a complete collection of files an folders including the critical iTunes Library.itl file, generally all enclosed in an "iTunes" folder. You do not direct iTunes to open a library with preferences, you do it by holding down the option/alt key while starting iTunes and guiding it to the .itl file you wish it to use.

IMac won't see HDD, no matter what I do - Please help!!!!

Hi,
I have a 2009 iMac 24in (4GB RAM, 500GB 7200rpm) and ever since I upgraded to Snow Leopard, I have one problem after another. I have erased the HDD on numerous occasions, 7 and 35pass, due to it not seeing the HDD, have tested (iDisk) the HDD and all seems fine, reset PRAM & SMC, tried safe mode etc, but nothing seems to work.
It will boot from CD, but every time I try to install, it won't see the HDD. I have tried connect via Firewire to another Mac, but only on one occasion was the HDD seen; that said, I was able to retrieve data, so at least that's one saving grace.
It's still under warranty, so I'll be taking it to Apple and dumping it on them, but given that I cannot afford to buy another Mac to replace this one, I was hoping that someone could give me a few pointers to getting this going, whilst my MacBook Pro is being sorted out.
Yes, I have two Macs in trouble (MBP has black screen), but I need one working for business use, whilst the other is being sorted out.
I really hope that someone can help me with this one, as I'm pulling my hair out!!
Thanks in advance.

Hi,
There's no doubting the cost per GB, particularly from Apple, but would I be wrong to assume that my overall user experience would not be better with SSD, than with HDD; taking cost to one side of course.
I use my Macs for business and quite honestly, the downtime I have experienced is more costly than the extra cost per GB of an SSD.
Appreciate that SSD technology is fairly new, but I work in the Film and TV industry and nearly every new camera with on-board recording is using SSD technology and I don't hear of many complaints or issues, as far as reliability and stability of the technology is concerned.
I do accept that an SSD in a computer is going to be doing a helluva lot more work, but the technology has to be better right?
Ultimately, am I making a good move or another making another howler by opting for SSD over HDD?? I acknowledge that's very broad question and open to a lot of opinions/personal preferences etc, etc.
Thanks.

Won't retrieve new mail

I am running Mail.app 3.6 on OS X 10.5.8. I have three IMAP mail accounts set up.
Last night, Mail.app stopped pulling in new mail. You can click the Get Mail button, it goes and looks (it all looks normal in the Activity Window), and returns with no new mail. Yet if I quit Mail.app and check with any other client (webmail, Alpine, iPhone via IMAP), I see lots of new mail.
My laptop had been up for a few days, so I closed mail (had to force-quit) and rebooted. No luck. I also repaired all permissions. I have tried deleting one of my INBOX.imapmbox directories. It quickly recreated it, with the same mail. Nothing new.
All three mail accounts are on different servers, running two different IMAP servers (Courier-IMAP and UW-imap). I have checked on one, and when mail quits, it closes all imapd processes. There are no other mail connections open, so I don't think it's a locking issue. I don't think it's a server issue, because it's happening on all three of my mail accounts.
Mail works fine with all the mail that is visible. You can delete messages, etc. If you log in via webmail and mark a message as unread, that change is reflected in Mail.app.
The short of the long: Mail.app just won't see any new mail since about 11pm last night.
Help! Any thoughts?
Thanks,
Seth

After trying lots of other ideas (including removing a mail account and recreating it), I have deleted my preference files and my Library/Mail folder. Starting over completely from scratch seems to have fixed it.
I'm disappointed that I could find a better solution.

GB won't see new instruments

Similar Messages

Maybe you are looking for