GB01 FM JV_GB01_DIRECT_INPUT...Document Created but giving error message

Hi All,
I am trying to POST S/L Documnet using the FM JV_GB01_DIRECT_INPUT.
Function module returns the Document Number.But when When I try to view this using Tcode GD23..Its giving an error 'Noline items were selected'.
I am not sure exactly which went wrong.
I filled T_GLU1 with 2 line items.
Could someone help me on this issue??
Thanks in Advance....

Similar Messages

Recovered Photos album automatically created, but no error messages.

Previously when I opened iPhoto, I received a message (or rather 2 {I believe} duplicate messages) about importing recovered photos. I clicked OK and it created a Recovered Photos album, but its contents were empty. I deleted this album by putting it into iPhoto's Trash. When I reopened iPhoto, I received the message again, but this time it created a "Recovered Photos 2" album.
I quit iPhoto and deleted the Import folder from my iPhoto Library. Now I don't get any messages, but the Recovered Photos (not Recovered Photos 2) album is still there. If I trash it and restart iPhoto, the it is automatically created again.
How can I stop iPhoto from automatically creating the Recovered Photos album? I'm not receiving any error messages or messages whatsoever.

Addendum to all about this question - I am trying to import my original CDs - hangs and does nothing at first track. Trashed the .plist, no help. Reinstalled fresh copy of iTunes - helped - FOR ONE DISK. After that, same problem.

During cancelation of MIRO document giving error message "RG23 Part II post

Dear guru's,
I am facing a tipical issue while i am going to reverse the MIRO document it is giving error "RG23 Part II posting not yet done" .
Senario is -- user has created MIGO with Myp103 and then 105, system promted excise tab and excise ref. and excise date is their .
But no Part1 generated.
So no part2 .
Now A/c has passed the bill and fi doc generated. Now we want revrse this bill (MIRO) and respectively MIGO (105/103 ) and again capture it with correct excise entry.
we want to understand, How this happned at 105 why part1 not generated and with out part2 how bill passed.
now waht can bo done to reverse this.
thanks in advance.
Ajeet

Hello,
Please check the status of excise invoices if they are "In process" stage. Unless the status is "Posted" you will not be allowed to do MIRO. Further, select only those line items which belong to excise invoice.
Another possibillity of the error could be that the user must have changed the excise invoice date after it was referred in MIGO.
If so, to avoid such issues and to stop the users from doing the above, please review the notes : 1285986, 1346926, 1406505.
I hope this helps.
Thanks and regards,
Suresh.

Mac OS 10.10.2 is installed and can open documents on my new Mac Air but an error message occurs with I try to attach a PDF to emails. Any thoughts? Apple was unable to help.

Mac OS 10.10.2 is installed and can open documents on my new Mac Air but an error message occurs when trying to attach a PDF to emails. Apple was not able to fix. Any thoughts?

The message says:
Please wait
If this message is not eventually replaced by the proper contents of your document, your PDF viewer may not be able to display this type of document.
Then it goes on to suggest an Reader upgrade, which I already did.

While releasing billing document to accounting getting error message

Hi Friends,
I have created new condition type -YES7 and assigned to pricing procedure YDE10K ,I am releasing billing document to accounting but while releasing to accounting document I am getting error messages as "Assign condition type YES7 in CO-PA"
if i double cilck this messages I am getting below descriptions.
Assign condition type YES7 in CO-PA
Message no. KE 391
Diagnosis
The system tried to transfer billing data to Profitability Analysis. However, an error was found in the assignment of condition types to CO-PA value fields. No entry has been made in the assignment table for condition type YES7.
System Response
The billing data cannot be posted to CO-PA if there is no entry as this would lead to differences between CO-PA and Financial Accounting. This is because this condition type posts to a G/L account (S400160).
Procedure
In CO-PA Customizing, make an assignment for condition type YES7 in operating concern EU01 under "Actual postings -> SD interface -> Assign value fields".
so please let me know how to rectify this issue.
Thanks in advance.
Regards,
Ramkrishna

Before posting any question, please search the forum so that you would get solution straightaway. Check these threads
[Re: Assign condition type ZSMN in CO-PA|Assign condition type ZSMN in CO-PA]
[Re: Billing not releasing to accounting|Billing not releasing to accounting]
thanks
G. Lakshmipathi

I am having a problem opening pdf document. I get error message: "Adobe Reader has stopped working"

I am having a problem opening pdf document. I get error message: "Adobe Reader has stopped working" then I get Windows is looking on line for a solution, but then my document closes. I tried uninstalling and reinstalling Adobe Reader XI, rebooted my computer but this did not help. I get the same message. What to do?

Can you open Reader by itself? If so, check if disabling Protected Mode improves the situation [Edit | Preferences | Security (Enhanced)].

FM SSF_CLOSE failing and giving error message while printing a smartform

Hi,
for language spanish the smartform is not getting printed for output type SG11 but for english it is getting printed? What could be the reason? I debugged and found that SSF_CLOSE is failing and giving error message.
Thanks and regards,
AP.

Hi Aparajita,
for changing from one languages to another translations in SE63 is to be done, either search on SCN for using SE63 , or atleast see these wiki help .
Transaction SE63 - Translation Tools for Translators (BC-DOC-TTL) - SAP Library
Transaction SE63 (SAP Library - Translation Tools for Translators (BC-DOC-TTL))

Giving error message when saving the Query

Hello,
I have added a new calculated key figure to the structure in a Query but when I try to save the Query it is giving error message is below.
Error Message:
u201CThis internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572u201D.
Could any one please suggest me how can I over come with this problem.
Thanks
Prathap.

Hi Prathap,
There is some problem in the definition of the Query.
Please click on the check button before saving the query, it gives where the problem exists in it.
Hope it helps.
Veeerendra.

Unable to email a document. Keep getting error message: Invalid Date Enter 2-digit month

Unable to email a document. Keep getting error message: Invalid Date Enter 2-digit month
Does not happen with all forms which emante from same USG webpage
Any adivice?

If i am using 11G andrtp is 11g but on rtp side if they configure SSL, is it mandatory to do it from our side also?No it not mandatory to enable SSL at your end however you have to configure identity and trsut at your end.
Any update on my regular question(The main forum question)?You mentioned that you are posting message from 10g to 11g and as per log you are sending it to URL - https://dev-nog.server:443/b2b/transportServlet
So few things which I see as a problem are-
1. You should use URL https://hostname:soa_server_ssl_port/b2b/httpReceiver instead of https://dev-nog.server:443/b2b/transportServlet
2. SOA server SSL port should be enabled (SSL should be enabled on SOA server)
3. You should configure wallet at 10g side to contain trust cert of 11g server
Regards,
Anuj

When the Table :" J_2IRG1BAL , " is giving error message SV023

Dear Sir/Madam,
When going to enter data in the table J_2IRG1BAL, it is giving error message as "create data processing function module SV023 in ABAP client in Dev. Server. Though it is alowing other tables to edit as usual.
Pls. advice.
Thanks,
Pranab
Edited by: Pranab Das on Jul 23, 2009 8:09 AM

Can you please check 'any authorization error' on your name. you can check in su53 transaction code.
regards
nag

Successfully downloaded and installed Adobe Reader on my PC ... ( Windows 7 home premium (64 bit) OS). Cannot print adobe documents... Error message indicates need to install plug-in for adobe reader for windows 7 home premium (64 bit) OS

Cannot print adobe documents ... Error message indicates a need to install plug-in for adobe reader.
Please advise how/where to locate the required adobe reader plug-in...
Thank you,
Joe Curcio

What is the full and exact message you are getting?
If the PDF contains Rich Media, the Flash Player plugin may be required: http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player.exe

HT201210 im trying to restore my iphone 4 but getting error message as could not be contacted or temporarily unavailable plz help

im trying to restore my iphone 4 but getting error message as could not be contacted or temporarily unavailable plz help

Hey santhosh.pv,
We have a few articles that can help troubleshoot the alert message in iTunes you see when you are trying to restore your iPhone 4. You can resolve many restore issues using the troubleshooting steps documented here:
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
The next article is the companion of the more general article above. Follow the above article first. If, after following that article, the issue persists, continue with this article:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Cheers,
David

I am trying to remove the older version of iTunes but an error message appears saying that it cannot find the path to 'iTunes64.msi", and I tried the search option to find it on my computer but no such luck. Please help me

I am trying to remove the older version of iTunes but an error message appears saying that it cannot find the path to 'iTunes64.msi", and I tried the search option to find it on my computer but no such luck. Please help me

Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.

I'm trying to sync my Iphone to get some new music but getting error message 'itunes was unable to load data class info'. How do I fix it (my husband's 2 devices work fine on the PC)

I'm trying to sync my Iphone to get some new music but getting error message 'itunes was unable to load data class info'. How do I fix it (my husband's 2 devices work fine on the PC). It's driving me mental and has stopped me putting anything new on for months. Help!!!

http://support.apple.com/kb/TS2690

Pacman running but getting error message

Hello all. I am new to Arch Linux having just installed it this weekend. I ran an FTP install just installing the base packages at first. I originally had difficulties getting the internet configured correctly but after checking the wiki I am up and running.
When I run pacman I get a message that there is an invalid locale (or incorrect - I am at work and forgot to bring my notes with the exact message, sorry). It then says it will use C as default. The packages install without issue, but, wanting everything to be "right" I have to ask if I have something configured incorrectly? If so, just head me to the right config or even the wiki page if I missed it.
Tonight I am working on getting xorg and gnome up and running. I have enjoyed the install very much and I have learned a lot so far. I am looking forward to learning more. I am so very please with how fast Arch loads. I have been used to bigger installs with lots of things I do not use.

LoneWolf43 wrote:
Yes i did run the command 'locale-gen' as root.
My language setting in rc.conf was en_US.utf-8, fixed this in locale.gen. but the error message is still there.
My Webmin ppp dialup stopped to work aswell with pacman 3.0. Installed pacman with "pacman -Sy pacman".
Testing a full update now if it maybe can solve some of my problems, or can i get the old pacman back? (In a easy way )
Thanks in advance
You didn't read what I typed.
en_US.utf8 (mine)
is different than
en_US.utf-8 (yours)
You want no hyphen.

GB01 FM JV_GB01_DIRECT_INPUT...Document Created but giving error message

Similar Messages

Maybe you are looking for