Gbit not working?

My LAN works ok, but it says its only 100.0 mbs not 1000.0, also in my BIOS there is no option for "onboard giga lan" like it says in the manuel. What is going on here?

Quote
Originally posted by shturmovik
Yeah but it does not show that the option is there in the bios..
I asked MSI this same question. They told me to save memory required for other BIOS functions, their developers combined the Lan/Gb Lan into the single option that is there now. If you enable it, it enables both.
At least, that's what they told me. This was via email with their tech support.

Similar Messages

Home sharing not working after update to iTunes 12.1

recenty updated iTunes to 12.1.0.71 64 bit for windows 8.1, and home sharing no longer works with my apple tvs. i have an apple tv 2 with software 7.0.3(6917) and an apple tv 3 aalso on 7.0.3(6917). I have tried the usual troubleshooting. Restoring, restarting, reinstalling itunes, made sure all the neccessary ports are open both on my router and firewall. Still not working. I would appreciate any help.

I have similar issue and already opened another thread for it...no reply so far. So I'll give it a try in here.
I'm using a Mac Mini (Mid 2010) with 4GB RAM, Yosemite 10.10.2.
The Mac is connected by cable to a Gbit Ethernet network switch.
I hope the following drawing helps to understand the network environment:
Mac <--> Switch_1 <--> Switch_2 <--> Fire TV
Switch_1 <--> WLAN Router AVM Fritz!Box 7270 <--> 30MBit Internet connection
The Mac and the Fire TV (running AirPlay server App) are both connected by Ethernet cable, but to different switches.
No WLAN enabled on Fire TV.
The WLAN router is the DHCP server.
For sure the remote App is running on an iPad (2) which is using WLAN.
All network addresses are in same network and were provided by same DHCP server (running on WLAN router).
All my music and internet radio is coming from the Mac.
I use remote app (latest version from Appstore) on the iPad to connect to iTunes 12.0.1.26 running on my Mac.
In iTunes I selected the Fire TV as AirPlay receiver.
Fire TV is playing all music through my AV receiver.
This is working perfectly fine except one issue which exists since update to Yosemite 10.10.0.
It remained same with Yosemite 10.10.1 and 10.10.2.
My problem is that I need to enable WLAN (wireless) on my Mac since update to Yosemite.
When I disable WLAN remote app does not find my media library anymore and iTunes is unable to connect to the Fire TV.
When I re-enable WLAN, everything is working fine again.
Remember, all devices except the iPad are on a cabled 1Gbit Ethernet.
Before updating to Yosemite I did not need WLAN.
Any idea what's causing this? IP traffic routing issue?
Usually, when I disable WLAN on the Mac, it continues to run for 1 or 2 days where the iPad has no problem to find and connect to the media library.
After a while. running with WLAN disabled, my iPad is not able to "see" the iTunes media library asking me to enable home sharing.
When I check on my Mac, home sharing is enabled.
I then disable and re-enabled home sharing in iTunes and after doing so my iPads is able to "see" the iTunes media library but it cannot connect to it.
I checked routing and arp tables on the Mac but everything looked fine, routing through the Ethernet interface.
I used "fing" on the iPad to see which devices are online and "fing" on my iPad was only aware of the Mac Ethernet interface. No entry for the disabled Mac WLAN interface.
I checked on the WLAN router and ensured that both Mac interfaces have unique host names (aliases) on the router.
To be sure everything is refreshed I rebooted the router.
No change, my iPad was able to find the iTunes media library through home sharing but was unable to connect to that media library.
So I enabled WLAN on the Mac and immediately my iPad could connect to the iTunes media library.
Weird...
Only mitigation I found so far is to re-enable the WLAN on the Mac.
So I assume something is broken in Yosemite / iTunes 12 home sharing.

Not work tablet UI on Prestigio 5080 PRO tablet

I read that browser.ui.layout.tablet = "1" can fix this problem. But it not works. I can work only in pnone interface that is not good for my 8'' tablet.

Would it be possible for you to share the problematic pdf and OS information with us at [email protected] so that we may investigate?
Thanks,
Adobe Reader Team

Why self-defined access sequences of free goods can not work?

Hi gurus,
I have maintained access sequences of free goods self-defined.but when i creat the SO it does not work!
when i used the standard access sequences ,it is OK .
Can anybody tell me why?
thanks in advance

Dear Sandy,
Go to V/N1 transaction select your self defined access sequence then go in to the accesses and fields and check all fields are activated.
Make sure that these fields are flowing in your sales order.
I hope this will help you,
Regards,
Murali.

Adobe bridge raw not working with windows vista in photoshop cc, why?

adobe bridge raw not working in photoshop cc, is there a fix?

Your sure your using photoshop cc on windows vista?
I was under the impression that photoshop cc would not even install on windows vista.
What version of camera raw do you have?
In photoshop under Help>About Plugin does it list Camera Raw and if so which version is it?
(click on the words Camera Raw to see the version)
Camera raw doesn't work if it's a camera raw file or some other file type such as jpeg or tif?
What camera are the camera raw files from?
Officially camera raw 8.3 is the latest version of camera raw that will work on windows vista.

Adobe Bridge CS5 in windows 7 not working?

Adobe Bridge CS5 in windows 7 not working. I was using bridge perfectly for last 2 years. It stops working since 3 days. I tried to install updates. Showing some error to install.
Tried to install creative cloud..again some error. Error code : 82
Could you please advice how I can fix my adobe bridge.

https://www.youtube.com/watch?v=xDYpTOoV81Q&feature=youtu.be
please check this video I uploaded..this is what happens when I click adobe bridge.. just blinks and go off. bridge not working on task manager

ADOBE CLOUD ON MY DESKTOP WILL NOT WORK. IT LOADS UP BUT NOTHING FILLS THE WINDOW

ADOBE CLOUD ON MY DESKTOP WILL NOT WORK. IT LOADS UP BUT NOTHING FILLS THE WINDOW

BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
-and step by step http://forums.adobe.com/thread/1440508?tstart=0
-and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html

Partner application logoff not working

We have a partner application registered with sso with custom login screen. The login works fine. We use the following code to logoff the partner application in logoff.jsp
response.setHeader("Osso-Return-Url", "http://my.oracle.com" );
response.sendError(470, "Oracle SSO");
session.invalidate();
but the logoff is not working properly. It is not invalidating the session and the logout http request is not going from the application server to the sso server.
Are there any additional configurations for SSO logoff.Any help is appreciated.
Thanks

Hi
The WF should also trigger if i add the Partner function in UI.If i change any Attribute the WF triggers but i dont want to change the attribute when i add the partner function.
If i have only one event for WF that is Partner Change the WF will not trigger it for the 1st time when i save the UI. But next i come to the same saved doc and add a partner function then the Wf triggers.
So this means that Partner change is active.
the issue here is i need to trigger the WF on , the 1st time i save the UI, for which i wil be using Attribute Change and next time when i come back to saved doc the and add only the partner function and no changes are made to attributes the WF should again trigger.
Thanks
Tarmeem

IPhone 4 Voice Memos not working/saving

Hi there,
I'm having trouble with my voice memos too. Up until yesterday they were working fine and now, even though the record button works, the stop button does not and I can only pause them. Worse again is that the button to go into the menu to view all voice memos is not working so I can't play them from my iPhone and nothing new is saving to my iTunes. Please help!

I've always had the "Include Voice Memos" option selected. I think that only pertains to syncing voice memos from iTunes to the iPhone after it has been copied to iTunes. It has to be the new OS/iTunes not communicating that new memos have been recorded. For some reason they won't sync when I want them to, and then a few syncs later they magically appear.
By the way, I'm VERY comfortable with the iTunes and iPhone systems. I've been using iTunes for 5 years, and I've been recording class lectures with the iPhone voice memo app (and another app) for a couple years. It's not an error of not seeing that the memos were added; they don't exist in my library or music folders.
JUST OUT OF CURIOSITY, POST WHICH FIRMWARE YOU ARE RUNNING EXACTLY!!!
I'm on an iPhone 4, running firmware 4.0.1

Installed Premiere Pro CS4 but video display does not work?

I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
2) the UI is way too slow for my big beefy system.
My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
Any ideas how to solve this CS4 install issue?
Ron

I would like to thank Dan, Hunt, and Haram:
The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
My PC is brand new with the following "beefy" components:
Motherboard
nForce 790i SLI FTW
Features:
3x PCI Express x16 graphics support
PCI Express 2.0
NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
Overclocking tools
NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
ESA Certified
NVIDIA DualNet and FirstPacket Ethernet technology
Registered
CPU: Intel Core 2 Quad Q9550
S-Spec: SLAWQ
Ver: E36105-001
Product Code: BX80569Q9550
Made in Malaysia
Pack Date: 09/04/08
Features:
Freq.: 2.83 GHz
L2 Cache: 12 MHz Cache
FSB: 1333 MHz (MT/s)
Core: 45nm
Code named: Yorkfield
Power:95W
Socket: LGA775
Cooling: Liquid Cooled
NVIDIAGeForce GTX 280 SC graphics card
Features:
1 GB of onboard memory
Full Microsoft DirectX 10
NVIDIA 2-way and 3-way SLI Ready
NVIDIA PureVideo HD technology
NVIDIA PhysX Ready
NVIDI CUDA technology
PCI Express 2.0 support
Dual-link HDCP
OpenGL 2.1 Capaple
Output: DVI (2 dual-link), HDTV
Western Digital
2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
Features:
10,000 RPM, 3 Gb/sec transfer rate
RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
p/n: TW3X4G1333C9DHX G
product: CM3X2048-1333C9DHX
Features:
XMS3 DHX Dual-Path 'heat xchange'
2048 x 2 MB
1333 MHz
Latency 9-9-9-24-2T
1.6V ver3.2

Ideapad A1-07 tablet wifi-bluetooth does not work!

Hello everyone. As you can see from the title on my tablet is not working wifi and bluetooth. When turning wifi tablet is reset and continues to be off and on until it forcibly turns off, and when you turn it on again, and do not touch wifi everything is normal and there are no problems with resetting. Can someone help me and give suggestion to solve this stupid problem. I'm from Croatia and I'm bad with the English writing.

Hi
Welcome To Lenovo Community
Please perform a factory reset
Please ensure you have backed any important data before doing factory reset
Hold the volume down and the power till Lenovo logo appears .
System will boot into recover mode. Follow the instructions
Hope This Helps
Cheers!!!
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with Kudos!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Polygonal lasso tool not working with stylus on Surface Pro 2

Hi guys,
I'm new here so please bare with me if I'm posting in the wrong place or don't make immediate sense.
Hardeware / software used: surface pro 2 and I'm running photoshop CS5.
Problem is a fairly basic one: I am trying to make basic selections using the polygonal lasso tool (using the stylus that comes with the tablet) but it simply will not work. All I get when I touch the stylus to the screen is the circle that appears then fades. If I attach the keypad and try using that then it works no problem at all.
Does anyone have any ideas as to whether there is a particular setting that I need to switch on or off e.g. something relating to pressure sensitivity (although not sure why this would affect this particular selection tool)?
I've searched the web and come up with nothing so far so any help is greatly appreciated!
Thanks for your time
Scott

same problem on surface pro 3 !!!!
and i think quite significant, for lot of artists using polygonal lasso a lot (including me). How come that the stupid surface cannot work properly

Excite PRO 3G connection not work after Android v4.3 update

Hello,
I live in Italy and on last Sunday (january 26th) my Excite PRO tablet (model AT10LE-A-10H) got the Android version 4.3.201121220.35.
After restart my wifi works fine, all other app work fine, but my 3g connection doesn't work, mobile network bar is empty and it says "no service".
My sim card is ok. I used this sim card before the system update and I didn't get any problem with Android 4.2.2.
Please help me.
Thank you

>After restart my wifi works fine, all other app work fine, but my 3g connection doesn't work, mobile network bar is empty and it says "no service".
Go to the mobile network settings and search again for the 3G network.
I had similar problem with my Android Smartphone and my o2 provider
I started new search, then I chosen the O2 again and then I could solve the problem.
In case this does not work for you, recommend you to reset the tablet back to default (factory settings)

A2109 tablet autorotate does not work

The autorotation on my recently purchased tablet A2109 does not work. I look in settings and the auto rotate field is not highlighted, I therefore cannot choose to turn it on.The tablet has the Android jellybean OS and I did update it but to no avail. Can anyone help?
Thanks
Solved!
Go to Solution.

Dear tdsouza
Welcome in lenovo forums
just a clarification , do you mean option Rotate is dimmed in setting
Please let me know
Thanks
Alaa
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Tecra M7: Tablet does not work after lid closing

Has anyone had problems with the tablet not working after closing the lid on a Tecra M7? Bios is 3.20
Doesn't seem to happen on hibernate or sleep.
I have the lid set to do nothing on close.

Hi
What do you mean with tablet not working after closing the lid?
Does the notebook freezes or what?? What happens exactly???
The close the lid settings can be set to hibernation mode or standby mode or no action.
These settings can be set in the power saver setup actions.
If you have some problems with some installed Toshiba applications I would recommend reinstalling the TOSHIBA Common Modules and the program which doesnt run correctly!
Best regards

Gbit not working?

Similar Messages

Maybe you are looking for