GC says Listener Down When It's Not

Have installed OEM 10.2.0.2 on Windows 2003 a couple times and still get the
problem with not recogizing that the database listener is up. Here's my installation procedure, in general. Does anyone see any problems with the install method?
Thanks in advance.
1.Install Microsoft Loopback Adapter (don't usually do this for 10g but thought it may improve things since I'm using DHCP.
2. Install 10g Database Enterprise Edition S/W only and upgrade to 10.2.0.3.
3. Create repository database using scripts and create listener, test local and remote connectivity.
4. Install Oracle Enterprise Manager 10.2.0.2
5. Apply Fix for Error 465427.1 for Win2003
1. Edit c:\oemgc\oms10g\bin\LaunchEMiasconsole.pm
2. Locate lines -XmxNNN and add -XX:+ForceTimeHighResolution in front of it.
3. Save the file and startup the Windows AS Control Service.
6. Install OEM Patchset 10.2.0.4
1. Update Management Service
2. Update Agent

The Oracle software was installed using a local account that is a member of Administrators. The Oracle services are run using the local system account. If this is not correct, how should this be configured.
Regarding DHCP, although Oracle recommends you not use this, Oracle Support says you should be able to. Our Linux/GC install works fine with DHCP.

Similar Messages

My itunes card says already redeemed, when it is not. Any suggestions

my itunes card says already redeemed, when it is not. Any suggestions

HI brabauer,
This issue can sometimes happen when you leave a field blank on the order form. Also, make sure that you're logged in to the Adobe store in the same country as your you credit card mailing address. (You can check by clicking Change Location in the lower-left corner of the adobe.com website.)
Please let us know how it goes.
Best,
Sara

In content viewer my shared folios say update available when I've not made any update. Why?

Hi, I've created a number of folios which are currently being shared with my clients via Content Viewer. The folios regularly show an "update available" message even when I've not made any update. Can anyone tell me why this happens?
Thanks
Puzzled DPS user

thanks for your reply
Yes, this is a fully paid up account and we are using the Adobe content viewer from the app store. No we do not use any 3rd party software. All folios are created in in-design and uploaded via the folio builder panel within in-design. As far as I'm aware this has happened since we started using DPS about a year ago. We are not hitting the update folio button within in-design, therefore they should not be saying update available.
Attached is a screen shot showing the online folio builder panel today, as you can see all publication dates are today. Should we be locking these folios?
I should also mention when we open in-design all of the folios we have published are still within the folio builder panel (see second screen shot) and being shared.

HT3597 Why would my iPhone 3GS say voice command when I'm not using it?

IPhone saying voice command when playing pandora. What would cause this to happen?

Someone or something is activating it by pressing and holding the home button.

EM12c Oracle Database Plug-In 12.1.0.7 update now shows 10g listener as down when it's not

EM 12.1.0.4 with Oracle Database Plug-in 12.1.0.7
Monitored database and listener: 10.2.0.4
Our EM12c monitors 12.1,11.2 and 10.2 databases and listeners. All monitored targets are up and running.
I updated Oracle Database Plug-in from 12.1.0.6 to 12.1.0.7 and now the only 10g listener that I have shows as down.
The listener on the server is up and running.
The monitoring configuration is right.
I removed this target and re-added it, but it came back as down.
It's a little disconcerting to have a listener show as down since it's a production box, but nothing I do corrects the problem.
Any insights or suggestions are appreciated.
Sherrie

Hi Sherrie,
In most cases we have this issue due to monitoring configuration , I know you mentioned that you have checked on it but still I would recommend to just re-confirm on below steps
1. Go to
    EM Console -> Targets -> Listener -> Listener Home page -> Target Setup -> Monitoring Configuration
2. Get the details
      Listener Name
      Listener.ora Directory
      Machine Name
      Oracle Home
      TCP Port Numbe
3. Go to the server where this listener is running
   Check to see if the listener is up
       ps -ef | grep tns
4. Next run
       $ORACLE_HOME/bin/lsnrctl status
   From this outpuy verify details in (1)
      Listener Name   <======= Alias
      Listener.ora Directory <=== Listener Parameter File ie the directory
      Machine Name <======= HOST=
      Oracle Home<========== This is where tnslsnr is started from
      TCP Port Number <====== PORT=
5. Makes sure that all the details matches in (4) and (2)
If above is fine then I would recommend to go through the troubleshooting steps as per below doc , they are valid for listener status down too and should give a further insight on the root cause of the issue
Troubleshooting the 'Pending' status for a Listener Target in Enterprise Manager 12c Cloud Control (Doc ID 1546576.1)
Regards,
Rahul

HT201436 can only talk on speaker phone, phone says headphones connected when they are not?

When receiving phone calls, can not hear the caller. Can only hear if on speakerphone. When volume is turned up, it says it is turning up volume for head set when head set is not plugged in.

https://discussions.apple.com/thread/1343532?start=0&tstart=0
try inserting and removing the regular ear buds 7 or 8 times
ie you have to have to turn on the iPhone and remove the headphones whilst the screen is active and unlocked.

How do I fix "Paper upside down" when it's not?

I'm printing DVD labels from Photoshop on "neato" paper, but when I hit "print", 9 times out of 10, the printer spits out the paper and asks me to turn the paper over. It's a real pain if you're printing several pages of labels at a time. It didn't always do this on this paper, just in the last couple moths. Running an HP C7280, on a Mac, OS 10.5.8

NitaJune,
You can try checking thru this:
None of the keys on my keyboard work
You can also try this (just a shot in the dark, can't harm anything)
Intel-based Macs: Resetting the System Management Controller (SMC)
If no joy, , you may also try a different USB keyboard to see if that functions properly, if not, do as QuickTimeKirk suggests

MBP shuts down when touched if not on a flat surface?

Good afternoon,
After recently replacing my damaged upper case/keyboard on my unibody macbook pro, now if I'm using it on my lap, or in bed, or basically anywhere other than a hard, flat surface like my coffee table, countertop, or desk, if I even slightly press anywhere on the upper case, the shut down dialoge will appear, and if I continue to hold, it will shut down as if the power button were pressed.
I carried it in my backpack on my way to work last week, and it shut down and started itself about 12 times from the walk from the train station to the building.
What gives? I've opened it up and checked the ribbon cable for power - it's seated properly. Is something obstructing the button, perhaps?

Assuming you did the repair yourself, it seems clear enough that either you got a faulty top case to replace the damaged one, or else you didn't get everything back together again quite right. You may want to take it apart again and then reassemble it carefully. I don't know whether you had any instructions to refer to when you disassembled it the first time, but you can find some here that may be useful:
http://www.ifixit.com/Browse/MacBook_Pro

I got a Color LaserJet CM2320nf MFP and I would liket to lock it down when it is not in use.

Hello.
Is there some kind of pincode I can lock it down with? So that a unatuized person can´t copy ore fax?
/Magnus

You may most likely need a HP Toolbox FX to configure the settings and put password protection.
Open HP ToolboxFX in one of these ways:
In the Windows system tray, double-click the HP ToolboxFX icon ( ).
On the Windows Start menu, click Programs (or All Programs in Windows XP and Vista), clickHP , click HP Color LaserJet CM2320 MFP Series , and then click HP ToolboxFX .
-=CHRIS=-
Please click kudos if you are happy with my response

My macbook air keeps shutting down when im not moving mouse or pressing keys

Since this morning when open my Macbook Air it a problem. It keeps trying to shut down when I'm not moving my mouse or pressing any keys. It also completely shuts down when I dont press "cancel" or move the mouse.

Try a SMC reset.
http://support.apple.com/kb/HT3964

Shuts down when not plugged in

My new (got it in July) MacBook shuts down when it's not plugged in. I usually turn it on and it will last around 2-3 minutes before shutting off completely, then if I try to turn it on it will make the turning on sound and immediately shut down. If I plug it in it will stay on. I looked at downloading OS X 10.4.8 in order to download the suggested firmwire to help with this issue, but will that cause me to lose all of my photos and everything else stored on my computer? Could there be any other solution to my malfunction?
Thanks for your help!!

Hi -
When it's plugged in ...does your battery show a charge? Also, if you press the little button on your battery (on the bottom of the macbook) a series of green led's should tell you if you have a charge. just asking this because your macbook may not stay on if your battery is not charging/dead.
Yes, you should also update you system and firmware as well.

I paid for and downloaded a song, but it won't play saying the file could not be found. It says this even when I click on the song IN the itunes store, so I can't even listen to the sample now??

I paid for and downloaded a song, but it won't play saying the file could not be found. It says this even when I click on the song IN the itunes store, so I can't even listen to the sample now??
I haven't kept records of the songs I have paid for, and a number of songs have recently been displaying this message, making me search my computer for them. Most I have been able to find, but this one immediately "disappeared" the moment I attempted to play it after downloading...... how do I either get it back or get my money back???

How did you do this move? Unless you know what you are doing you have to move the whole, complete iTunes folder.
iTunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the new location of the library.
Windows users see tip at: https://discussions.apple.com/message/18879381

My ipad is not going past the logo screen and it shuts down when I have battery, then it says I need to charge it. I am charging it but it isn't charging. Then my ipad isn't charging (doesn't say not charging) I've tried everything!

First, my ipad wasn't charging. Then it shuts down when I have 7% battery, now when I turn it on, it says to charge it. And when I do charge it, it doesn't work. Now, I did it once it worked. Now I can't get past the logo screen and when I do it shuts right off again. Please help!

Hi InternetHogger,
Welcome to the Apple Support Communities!
I know that situations where you cannot boot your iPad and cannot charge your iPad can be very frustrating. In this situation, I would recommend using the attached article as a reference for troubleshooting.
iOS: Not responding or does not turn on - Apple Support
Cheers,
Joe

My iPod touch 4g will do wierd things like, shut conpletely down when I'm listening to my music, and stuff like that, I resored my iPod to factory settings three times and the problem is still not fixed, what should I do ?

My iPod touch 4g will do weird things like, shut completely down when I'm listening to my music and when I do other stuff, the warranty is expired, so can I get it repaired? Please help

If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar

Trying to combine folders within LR4 from two separate drives without creating duplicates--sometimes it won't let me transfer to destination folder because it says files are there when they are not; other times, allows duplicates to transfer

Trying to consolidate 261K+ of images within LR4 between two drives. Someone who was "helping" me with my Library in LR4 for some reason took some but not all of the file folders from my main backup drive (M) and duplicated them onto a partitioned hard drive (E) directly on the computer. The duplication is huge, so I am trying to condense them all back onto the original backup drive M, particularly since I believe there are also folders on the partitioned backup drive E that do not appear on the main one M, and there are many more file folders on M that are not on E, so that is the destination drive.
CONSOLIDATION: When I try to drag either the file folders or the individual files from the duplicate drive E to the original drive M to combine the two drives since the folders in many cases for some reason are not identical, sometimes LR4 says the files already exist when they clearly don't. Other times it allows me to drag and drop all files, even if the exact duplicates are already on the destination drive, thereby doubling the number of files per image and creating more duplicates. Right now I am opening each file folder on the duplicate drive E, looking at what extensions and file names are there, scrolling to the original drive, making sure they appear to be identical, then going back to the duplicate drive E, deleting the images in the folder, removing the folder, and moving to the next folder on the duplicate drive E. *There has got to be a simpler way.*
CONSOLIDATION APPROACH: I did start to create file folders names A, B, C and group file folders under them to reduce clutter, since those header folders can be closed down when not in use, but now I am wondering if I should have done that alphabetization to the main backup drive rather than to the partitioned backup drive.
My goal is to consolidate the two drives down to one, delete as many images along the way that I know I will never miss, then backup the catalog and export it to an external drive and then copy that to yet another drive for offside storage. Does this sound like the proper plan? Last time it took almost 24 hours and over a terabyte to export the catalog.
DUPLICATION: I also have many file folders that have the exact same image in them. One portfolio image may actually be in eight different folders, with the exact file, file name, file size, and date, even though I always have checked "no duplicates on import," How can this be? What is the best way to sort through duplicates? Why are the files in some of the duplicate folders not in numerical order? If I do a search and call up a file # and find 15 duplicates, the only way I can find where those duplicates reside is to take each duplicate, right click to Locate Folder in Library, then once I find it, I have to go back to All Photographs>Text.search for file #, go to the second duplicate, right click to Locate Folder in Library, then once I find it, I have to do it all again. Is there a simpler way to see all the occurrences in their respective folder locations at once?
SEARCH BY FILE FOLDER NAME ONLY: I also find I can't search for a file using a folder name (for example, "John_Doe"). I can only search by file #, keywords, or camera/lens/date, etc. Why will it not work to use All Photographs>Text>search for Doe? In other words, if I didn't keyword the individual files as John Doe, I can't search for them by that moniker.
BACKUP: It also appears that the only way I can back up the catalog is to shut down LR. Really?!
FOLDER LIST PRINTOUT: Is there a way to print out the Folder list (other than a screen shot)? I have so many file folders on each drive since I sort not by Year/Month/Date but by subject. It makes trying to compare duplicate folders quite unwieldy.
SLOW RESPONSE: And finally, as though that weren't enough, why does LR4 continually blink to a white screen after each keystroke? Takes forever just to be able to click through images, view info after hovering, etc. All other programs are closed down and the operating system shows very little memory being used.

A brief and probably non-helpful answer: I know of no way to eliminate your large amount of duplicates other than by repetitive, tedious manual effort.
*There has got to be a simpler way.*
I hope you're right, but I don't think there is a simpler way.
BACKUP: It also appears that the only way I can back up the catalog is to shut down LR. Really?!
Yes, really

GC says Listener Down When It's Not

Similar Messages

Maybe you are looking for