Gcagent.log reports unsupported protocol

Greetings,
Upgrading from OEM 11g to OEM 12c from the ENterprise Manager 12c Upgrade Console using the 2-System method I have just switched over the agents on each node of a two-node RAC cluster. Things are mostly reporting correctly.
However in the gcagent.log and gcagent_errors.log file on each node I see the following error reported -
2013-03-11 09:24:14,862 [33:HTTP Listener-33 - /emd/main?X-ORCL-EMOV=4.0.0&X-ORCL-EMCV=11.1.0.1.0&X-ORCL-EMSV=10.2.0.5.0] ERROR - unsupported protocol
2013-03-11 09:24:14,880 [33:HTTP Listener-33 - /emd/main?X-ORCL-EMOV=4.0.0&X-ORCL-EMCV=11.1.0.1.0&X-ORCL-EMSV=10.2.0.5.0] ERROR - unsupported protocol
I have searched and am unable to find an explanation of this error. There are scan listeners on each of these boxes and OEM 12c shows them as being unavailable. The regular listener is reported as up.
I am not sure where to look for an explanation of this problem and any suggestions would be greatly appreciated.
Thank you.
Bill Wagman

Bill, you have SR open 3-6714456351 so lets look at the errors as a part of the same SR. We can update the thread with finding later

Similar Messages

Error: 400 "Bad Request" for "deletetree", file "": Unsupported protocol .

Hi
I have an C# application suddenly crashing after months of operation. The application is running on a Windows7 machine and is controlling 2 x NI6602 PCI counter cards through daqmx. The only clues to what when wrong is the following messages in the Windows Application Log.
Message 1 (occurring first):
LabVIEW information: Error: 400 "Bad Request" for "deletetree", file "": Unsupported protocol .
Message 2:
Faulting application name: RecordingStationGUI.exe, version: 1.0.0.0, time stamp: 0x4e3fa214Faulting module name: KERNELBASE.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdaaeException code: 0x80000003
Does anyone know what is causing this error and/or how I prevent this from happening again?
Regards,
mola

Where you ever able to resolve this issue? I have a very similar issue

DirectoryService trying to access "unsupported protocol family"

Hi,
this morning when i woke up and woke up my computer after a good night's sleep, something strange happened on my dual G5 running 10.4.11: little snitch reported "network activity" from /usr/sbin/DirectoryService, stating that it was trying to connect to (sic) "(unsupported protocol family):1 using protocol 17". i've had little snitch running for a while now, and never seen that -- and the format of the message is quite weird, i have no idea what this "(unsupported protocol family):1" means, nor this "protocol 17" -- it's quite different from the kind of messages i normally get from little snitch, since it normally reports attempts to connects to servers on ports.
i've tentatively allowed it to connect "until quit", and it came right back at me, asking to connect again -- which would mean that the program quit and started again, but of that i doubt, since the PID hasn't changed (91).
i think i'm gonna shut down the computer and see what happens tonight when i start it again. in the meanwhile, anyone's got an idea what it actually means, and why this only started happening all at once? i can't remember having installed any new program lately, not performed any update -- not lately enough to see a connection anyway.
thx in advance
Pagod

Hi pagod,
I was just searching what "DirectoyService" is too. If you under Little Snitch Rules (v.2) Select the "directoryService" rule and click "info" on the right corner. You will get a short description. The note say:
"Directory Services is a core part of the Mac OS X's Open Directory technology and may also be used for DNS lookups."
I guess the better is to ask the question at the LittleSnitch forum:
http://forums.obdev.at/index.php?c=6
Cheers,
Rico

I need the Log Report for the Data which i am uploading from SAP R/3.

Hi All,
I am BI 7.0 Platform with Support Patch 20.
I need the Log Report for the Data which i am uploading from SAP R/3.
I extract the DATA from R/3 into BI 7.0 DSO where I am mapping the GL Accounts with the FS Item. In the Transformation i have return a routine on the FS Item InfObject . I am checking the Gl code into Z table for the FS Item .
I capture the FS item from the Z table then update this FS item to Infobject FS item.
Now i need to stop the Data upload if i do not find the GL code in the Z table, and generate report for all GL code for which the FS item is not maintained in the Z table.
Please suggest.
Regards
nilesh

Hi.
Add a field that you will use to identify if the GL account of the record was found in the Z table or not. Fx, create ZFOUND with length 1 and no text.
In your routine, when you do the lookup, populate ZFOUND with X when you found a match (sy-subrc = 0) and leave it blank if you don't find a match. Now create a report filtering on ZFOUND = <blank> and output the GL accounts. Those will be the ones not existing in the Z table, but coming in from your transactions.
Regards
Jacob

Audit Log Report not display and error is "Report Contents No data"

Dear All,
i have reuired the audit log report but when i am click the Site Action->Site Setting->Audit log reports->Run a custom report-> select the day and option and click ok the i have received the error
Please help me please check below screen shot

Can you please confirm that you have configured events to audit?
Configure
audit settings for a site collection
Here is step by step how to configure audit setting.
http://anthony-verschraegen.blogspot.ca/2013/04/sharepoint-2013-configuring-audit.html
Amit

Every mavericks user, except 13" late rMBP, do you have "kernel usb keyboard" log report issue on your console, check it out please

hi everyone, we are the owners of the late 2013 retina macbook pro, with this keyboard and trackpad issue.
please help us by looking at your console for this log report:
08/11/13 00:49:01,000 kernel[0]: The USB device Apple Internal Keyboard / Trackpad (Port 5 of Hub at 0x14000000) may have caused a wake by issuing a remote wakeup (2)
we are really curious whether it is only happening on our 13" rMBP or is it happening on everyone's mac with mavericks.
especially we would like to know whether this report is also on 2013's mac. MacBook Pro Retina 15" late 2013 Haswell, iMac Haswell, MacBook Air Haswell.
Thanks for your help, really appreciate all your reports!
please help us so that we could try track it down whether the issue is hardware or software related.

Yes, after the EFI update I'm seeing over 4,000 of these error messages.
12/16/13 1:08:32.000 PM kernel[0]: The USB device Apple Internal Keyboard /Trackpad (Port 5 of Hub at 0x14000000) may have caused a wake by issuing a remote wakeup (2)
This happens everytime I touch the keyboard or trackpad. I believe this should not be a normal ocurrence performing such a NORMAL and Essential task as using the imbedded peripherals to operate a machine.
I contacted Apple Support and spoke with a Senior Advisor for troubleshooting. I was instructed to send capture data to apple showing the console errors in their entirety.
From my impressions speaking with Apple today, this is not a normal error and a exchange might be offered, but I'm afraid that will not remedy the issue. This being a chronic and widespread issue with OSX Mavericks and late rMBP Haswell models.

Issue with Audit Log report in SharePoint 2010

I have enabled REPORTING feature at site collection level and configured the site collection audit settings. I tried to generated Audit log reports, most of the time it keeps on processing as shown in fig.It
keeps on processing, never comes to report generated successful message. how to overcome this issue?

i'm facing same issue, even when i tried to generate report for limited limited period(5 days) for a particular event(ex: delete or restore items (or) edit items).
I think, the below reference may guide you solve your issue
http://sharepoint.stackexchange.com/questions/17151/how-often-should-the-auditing-log-be-cleared-to-not-affect-performance
Sekar - Our life is short, so help others to grow
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
you see a reply being an answer to the question of the thread, click "Mark As Answer

SLG1 logging report : print error says 'This object is not documented'

Hi,
I run the logging report (SLG1) and selected one of the line items from the
list, then I pressed F6 (button with the spectacles) to view the
technical information. This was presented, but when I try to print this
information I get the message 'This object is not documented'.
Do anyone know wht this error is displayed? How do I correct it so that I can print the info required.
Regards,
Vijaya

Hi,
This is might be because of some user settings in the SAP with print parameters.
As of now if you want to do the below operation, you can by pass the error message available in the function module and take the print out.
In the function module DOCU_PRINT, error is avialable at line no. 318,
message i775(sd) with text-310.
Regards,
Santhosh

SPM Reporting - Log reports display on front end

Hi,
We have implemented GRC 5.3 and have an issue on the SPM reporting through the front end.
We have done config in dev and have the following jobs running in the background every 1 hour:
1. /VIRSA/ZVFATBAK
2. /VIRSA/ZVFAT_LOG_REPORT
3. /VIRSA/ZVFAT_V01
4. /VIRSA/ZVFAT_V03
The log on the back-end displays all activity of FF user, but when going to the front end I seem not to get any reports to display.
We have created the connectors via the config page, but when trying to drill through the selection criteria we found that the FF user does not come up as a selection variable. We see the system defined though.
Any suggestions how to get the reporting to display on the front-end?
Kind Regards, Melvin

Santosh,
You should only need the /virsa/zvfatbak job running in the background. However, if the emails are not triggered for the log reports, you may wish to schedule the /virsa/zvfat_log_report program to run after completion of /virsa/zvfatbak as that is the program which actually sends the notifications.
Regarding the RFC user, check the authorisations held in the Firefighter Administrator role as those will not be too far away!
Simon

Mail adapter error: Unsupported protocol: linsmtp [null "null"]

Hi,
Idoc to Mail adapter. First time working with mail adapter.
When I tried to send messages from transaction "SO00", i'm able to receive the mail which means the connection is fine from XI to mail server.
But when I try to send the file using mail adapter, it is failing in adapter engine with the error below.
Success Mail: calling the adpter for processing
Error Mail: call failed; com.sap.aii.messaging.srt.BubbleException: Unsupported protocol: linsmtp [null "null"]
Success Mail: sending a delivery error ack ...
Success Mail: sent a delivery error ack
Error Mail: error occured: com.sap.aii.af.ra.ms.api.RecoverableException: com.sap.aii.messaging.srt.BubbleException: Unsupported protocol: linsmtp [null "null"]
Error MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: com.sap.aii.messaging.srt.BubbleException: Unsupported protocol: linsmtp [null "null"]
2010-11-12 14:12:02 Error Exception caught by adapter framework: com.sap.aii.messaging.srt.BubbleException: Unsupported protocol: linsmtp [null "null"]
2010-11-12 14:12:02 Error Delivery of the message to the application using connection Mail_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: com.sap.aii.messaging.srt.BubbleException: Unsupported protocol: linsmtp [null "null"].
Checked SMICM -- GOTO-->Services --> SMTP is active with green tick.
Receiver adapter:
Transport Protocol = SMTP
Message Protocol = XIPAYLOAD or XI ALL
URL = SMTP:linsmtp.sap.com
Not using User Authentication
User/ Password given - No userid/pwd
From, To = mail id
Content Encoding = try with none or base64*
Is there any setting which I need to do? how to connect and send message to mail server?
Thanks
Deepthi.

Hi,
My connection is working now when I downloaded the xsd and executed in the mapping as described in the blog.
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
Connection is working fine now, but im getting the below payload.
<?xml version="1.0" encoding="UTF-8" ?>
- <ns1:Mail xmlns:ns1="http://sap.com/xi/XI/Mail/30">
<Subject>TESTING</Subject>
<From>deepthi at testing.com</From>
<To>deepthi at testing.com</To>
<Content>Testing purpose</Content>
</ns1:Mail>
The question is how to get my actual message which looks like below. this is the Idoc to file map and the resultant output file looks like below
<?xml version="1.0" encoding="UTF-8"?>
<ns0:order xmlns:ns0="http://testing/xi/OrderProcessing">
     <document_type>ZU</document_type>
     <vendor_number>200000</vendor_number>
     <vendor_email_address/>
     <vendor_address_line_1>XXXXXX</vendor_address_line_1>
     <vendor_address_line_2>XXXXXXXXX</vendor_address_line_2>
     <vendor_address_line_3>123242343244566</vendor_address_line_3>
     <vendor_address_line_4>US</vendor_address_line_4>
     <delivery_address_line_1>1433</delivery_address_line_1>
     <delivery_address_line_2>test</delivery_address_line_2>
</ns0:order>
How to send this file as email attachment using mail adapter. Do I need to use 2 maps?
looks like Mail adapter is working only when we use the xsd which is given above and by providing the required details.
Kindly help me if anyone worked on mail adapters.
Thanks
Deepthi,

Daily Logging Report

Oracle Apps 11i
Database : 9i
can i get users logging report to a specific responsibility / apps on daily basis
i have this query can anyone correct if i am wrong or is there any other way -
select b.user_id,user_name, a.description,first_connect, last_connect,r.RESPONSIBILITY_name
from fnd_user a, icx_sessions b, fnd_responsibility_vl r
where a.user_id = b.user_id
and r.RESPONSIBILITY_ID = b.RESPONSIBILITY_ID
------and a.user_name like '%abc%'
and r.RESPONSIBILITY_name like '%In%Lo%Pur%'
and b.last_connect >= sysdate
order by first_connect
Regards,

Hi,
You can run "Signon Audit Users", "Signon Audit Responsibilities" concurrent programs to get these details.
If you want to get the same from the backend, please refer to:
Note: 295206.1 - How to Count Total Number of Users Connected to ORACLE Application
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=295206.1
USERS CONNECTED
Re: USERS CONNECTED
Number of users logged in last two months
Number of users logged in last two months
Regards,
Hussein

Usage Report and Audit Log report showing different totals

I am trying to understand the differences displayed in two similar reports. The first report is an 'Audit Log' Report and it is displaying the number of Resource Account creations over a time period. The second report is a Usage Report using the exact same criteria (objectType = Resource Account and Action = Create). The totals I get back are VASTLY different. Can anyone explain? Is this a known bug?

Hi,
In any report we don't show the storage policies information. In Cost report if the storage policies have different rate factors then we will show the split for the storage information. But in usage report , rate factors will not be applicable as we don''t show the cost details. Hope this clarifies your question. Please let us know if you need more information.
Thanks,
Lakshmi

Change log report S_AHR_61016380 not picking IT0025

Hi Experts,
I need the change log report to capture the details of changes made in IT0025 (Appraisals).
I have made necessary configurations to the below tables by watching in other SDN threads, but still my problem is not solved.
Also made changes to master data (IT0025) and tested, but still no use.
Log report is not picking changes made to IT0025.
Please suggest
Thanks
Venkatesh

Dear Expert,
for logged changes in infotype report we need to install crystal report.
please suggest.

PO Version Log report....Urgent

Hi Experts,
I have to create a PO version log report, which should display old values and new values for each version of PO.
Values we can get using tables CDHDR and CDPOS but it table CDHDR is not saving version number. Version Number we can get from table EREV.
We can use FM CHANGEDOCUMENT_READ_HEADERS for ObjectID etc which takes values from cdhdr &
CHANGEDOCUMENT_READ_POSITIONS for old and new values whch takes values from cdpos.
But the problem is i am not getting how to match these tables to get exact values.
The code i have written using these FM is giving repeted values. means for each version it is giving same values, which is not right.
code is like ...
LOOP AT it_ekko where revno GE '00000001'.
    ebeln1     = it_ekko-ebeln.
    date_from = p_chadt-low.
    date_until = p_chadt-high.
    REFRESH it_cdhdr.
    CALL FUNCTION 'CHANGEDOCUMENT_READ_HEADERS'
      EXPORTING
        ARCHIVE_HANDLE                   = 0
        date_of_change                   = date_from
        objectclass                      = 'EINKBELEG'
        objectid                         = ebeln1
        TIME_OF_CHANGE                   = '000000'
        username                         = ' '
        LOCAL_TIME                       = ' '
        date_until                       = date_until
        TIME_UNTIL                       = '235959'
        NOPLUS_ASWILDCARD_INOBJID        = ' '
      TABLES
        i_cdhdr                          = it_cdhdr
     EXCEPTIONS
        no_position_found                = 1
        wrong_access_to_archive          = 2
        time_zone_conversion_error       = 3
        OTHERS                           = 4.
    IF sy-subrc <> 0.
      CONTINUE.
    ENDIF.
    LOOP AT it_cdhdr WHERE username IN p_chaby."
      REFRESH it_cdred.
      CALL FUNCTION 'CHANGEDOCUMENT_READ_POSITIONS'
        EXPORTING
          ARCHIVE_HANDLE                = 0
          changenumber                  = it_cdhdr-changenr
        TABLES
          EDITPOS                       =
          editpos_with_header           = it_cdred
        EXCEPTIONS
          no_position_found             = 1
          wrong_access_to_archive       = 2
          OTHERS                        = 3
      IF sy-subrc <> 0.
        MESSAGE i001(319) WITH 'No change!'.
      ENDIF.
      LOOP AT it_cdred.
*------get vendor name in final table by passing vendor code.
        CALL FUNCTION 'MC_VENDOR_TEXT_SINGLE_READ'
          EXPORTING
            i_lifnr   = it_ekko-lifnr
          IMPORTING
            e_lifname = it_final-lifnr.
        CALL FUNCTION 'ZHZLMM_REASON_TEXT'
          EXPORTING
            i_rscod         = it_ekko-rscod
          IMPORTING
            E_TEXT          = it_final-rstxt
          EXCEPTIONS
            NOT_FOUND       = 1
            OTHERS          = 2
        IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
*------pass all values to final table to display in ALV
        MOVE-CORRESPONDING it_cdred TO it_final.
        it_final-revno    = l_erev-revno.
        it_final-werks    = it_ekko-ekorg.
        it_final-revok    = it_ekko-revok.
        it_final-ebeln    = it_ekko-ebeln.
        it_final-ernam    = it_ekko-ernam.
        it_final-erdat    = it_ekko-erdat.
        it_final-eruhr    = it_ekko-eruhr.
       it_final-rscod    = it_ekko-rscod.
        it_final-netwr    = it_ekko-netwr.
        it_final-difwr    = it_ekko-difwr.
        it_final-waers    = it_ekko-waers.
        it_final-txz01    = it_ekko-txz01.
        it_final-crnam    = it_ekko-crnam.
        it_final-fgnam    = it_ekko-fgnam.
        it_final-fgdat    = it_ekko-fgdat.
        it_final-fguhr    = it_ekko-fguhr.
        APPEND it_final.
        CLEAR it_final.
      ENDLOOP.
      CLEAR ebeln1.
    ENDLOOP.
ENDLOOP.
Please help me as it is very urgent.
Regards,
Nik

Hi Nikhil,
I too need the PO versions information, the old values, new values and which were all the fields changed in every versions.
I need each and every data changed in all versions.
Could you please help me by giving the complete logic or what you have done in your case.
Thanks in Advance.
Regards,
Prabhu

Audit Log Report generating an "Out of Memory" error message.

Greetings. We are a new IDM customer. We are running IDM 6.0 with an Oracle database. We are now getting the following error message when we run the IDM Audit Log Report for Today's Activities:
"java.lang.OutOfMemoryError".
How do we increase the memory setting for reporting? Thanks.

Hi,
I am also getting the same error. I have netbeans with tomcat andi modified the setting the netbeans.conf to
netbeans_default_options="-J-Xms32m -J-Xmx750m -J-XX:PermSize=32m -J-XX:MaxPermSize=750m -J-Xverify:none -J-Dapple.laf.useScreenMenuBar=true"
i have 896MB of RAM. However, the error is still showing up? Any ideas on how to resolve this?
Thanks,

Gcagent.log reports unsupported protocol

Similar Messages

Maybe you are looking for