Gcc could not work

I config alchemy step by step
1. ./config
2. source alchemy-setup
3. alc-on
and then I run "which gcc" , and it is alchemy gcc .. but when I run gcc --version to show the gcc version , it doesn't show any thing,
So I think that alchemy gcc could not work...how can I do???

You can try to install it with this installation pack. I have not try it personally but it looks very easy.

Similar Messages

I logged in to fb but could not 'work' anything, changed browser to chrome google and everything worked, why is this?

I could login, could read everything on fb but could not 'work' on fb, could not 'like', not post, not access anything.
My tech suggested changing from firefox to chrome google and everything worked.
Only other problem is that windows has taken over the posts of my photos and I can't see the photos now, just little green box in middle of screen unless I click on the box and it opens up the photo. How do I get my photos back now, as well.
Am going back to firefox once more to see if everything is cleared up.
Any suggestions about getting photos 'released' would be good.
Thank you in advance.

You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

HT1414 after restore i reached in the "choose a network" than i trying to connect to itunes but it could not work forword ..what to do..please tell??

after restore i reached in the "choose a network" than i trying to connect to itunes but it could not work forword ..what to do..please tell??

after restore i reached in the "choose a network" than i trying to connect to itunes but it could not work forword ..what to do..please tell??
iPhone 4

Just now i replace the 5s mother board but could not work touch id pls help me.....

just now i replace the 5s mother board but could not work touch id pls help me.....

if you have replaced the logic board on your phone, by yourself then that is considered modification and can cause other parts to fail due to ESD issues or just damage from handling parts

After i changed my computer's name and ip ,the EM could not work???

My server is sunV890 + solaris9+oracle 10g
After i changed my computer's name and ip ,the EM could not work???
Who can help me to sovle this problem?thank you

The notes in these Metalink documents will help you:
Note:224425.1
Note:260571.1
Note 141955.1
Note 95418.1

So I have updated my iphone4 GSM to ios 6.01, however after updating, my safari and mail could not work anymore, when i open these 2 apps, it just opens and hangs then it crashes.

So I have updated my iphone4 GSM to ios 6.01, however after updating, my safari and mail could not work anymore, when i open these 2 apps, it just opens and hangs then it crashes.
anybody can help me ?

So I have updated my iphone4 GSM to ios 6.01, however after updating, my safari and mail could not work anymore, when i open these 2 apps, it just opens and hangs then it crashes.
anybody can help me ?

The print control could not work?

Hi,
I want to set my characters upside down in my smartforms,and i got something from the net about print control.I used the print control 'COL2V' in 'CNSAPWIN'.
But when i printed this form,it seems the print control did not work.So,anyone who could help me?

If you Google COL2V you'll find that this is a control for ABAP List for "inversed" font, which is not upside down, I believe, but just the color inversion (e.g. white on black background).
There are many questions on SCN regarding the text rotation (use Search) but since even SAP delivers a bitmap where a rotated text needs to be in the Smartform, I doubt there is such option through the print controls.

Upgraded window to win 8. reinstall itunes and could not work... help

Hi
I upgraded windows 7 to windows 8. Reinstall itunes after uninstalling the older version. But this message keeps appearing.
iTunes Installer Completed
The installer encountered erros before iTunes could be configured.
Errors occurred during installation. Your sistem has not been modified.
Please run the installer again or click Finish to exit.
Lost ... please kindly help.

iTunes 11 is not supported in Windows 8.
I heard some users made it work but you have to Google for it.

Automatic MRP could not work for several materials

Dear Expert,
I have problem here in running MRP. Some of the materials were not automatically running MRP. While when I tried to run it manually using MD01 it works.
May be u can give me some idea why? When I tried to check the setting, i found in the table all the materials with complete status KCVDLSBGZXA are not automatically running MRP.
Is it because of that complete status setting? if yes where could i found that setting ?
Thanks
Pauline

Paulin,
MRP relevant changes can be new procrument proposel, changes done in MRP view of material, changes in qunatity for re-order planning relevant materials etc.
MRP will not done untill and unless you have entry of materials in planning files.
i am not agree with you on the point that auto MRP is running for the material for which there is no planning file entry.
another things is please , provide details of material master like MRP type etc for the material for which planning file entry is there but MRP is not considering it.
another question is , what result you are expecting after MRP run ....? i mean how you come to a conclusion that MRP is not run for few of the materils but its done sucessfully for other materials ......?
please check it again and reply.
Regards

E2500 - COULD NOT WORK WITH ROKU

If you intend to use it with a Roku device to stream movies or shows from Netflix, hulu etc. The Roku will not connect to this router. Spent hours working on it make changes to router settings, nothing worked for me. Just search Roku Linksys e2500 and see the unresolved issues for yourself. Also had trouble setting up a Vulkano device as well. To be fair, the router has worked with my laptops, wii, xBox and mobile devices but it should work effortlessly with everything wifi.

Since you already did some research on your router, that's a good start. If you installed your router using the CD(instead of manually using a web browser) just open the router settings, then go to advanced settings. You will then be prompted to sign in to your router settings, it will show you your username and password for the router setup page.
Once you're in, you should be in the SETUP tab by default. Go to the lower part of the page where you have Static DNS 1, Static DNS 2, etc. then just enter the following.
Static DNS 1 =
Static DNS 2 =
for the wireless
All Roku models are not dual-band wireless N capable so no need to worry really if it's connecting to the 2.4ghz or the 5ghz network. By default, since the roku can only see the 2.4ghz network, then there are a few things we can do here.
If it can't connect, your router wireless channel could be set to default. If you you're using Wi-Fi protected setup, you'll have to flip it to manual first in order to change the wireless channel.

[HELP] [BPEL 11g] Customized BPEL worklist app could not work on JBoss

Dear all,
We are developing the customized Human Worklist app based on BPEL HW API 11g.
The application (some jsp pages) works fine in JDeveloper 11g. However, after deploy to JBoss, it always prompt with "NoClassDefFoundError" exception, although we have already add following 7 jar files into Classpath:
${jdeveloper.home}\Middleware\wlserver_10.3\server\lib\weblogic.jar
${jdeveloper.home}\Middleware\jdeveloper\modules\oracle.jrf_11.1.1\jrf.jar
${jdeveloper.home}\Middleware\jdeveloper\modules\oracle.webservices_11.1.1\wsclient.jar
${bea.home}/AS11gR1SOA/soa/modules/oracle.soa.fabric_11.1.1/bpm-infra.jar
${bea.home}/AS11gR1SOA/soa/modules/oracle.soa.workflow_11.1.1/bpm-services.jar
xml.jar
xmlparserv2.jar
Then we manually copy many other jars (nearly 100) under Weblogic server, but it still prompt lacking of some jar file with "NoClassDefFoundError" exception.
So, does BPEL 11g support deploy HW app outside weblogic, like JBoss? If so, what we need to set at JBoss side to run our app?
Thanks a lot.

Not sure it is available yet as I have not seen any doc for 11g.
here is the 10g instructions which may provide some pointers.
http://download-east.oracle.com/docs/cd/B31017_01/web.1013/b25947/deployment_topics012.htm
cheers
James

Could not work next button.

Hey All!
I'm now working with j2me for Nokia. And for this I'm using a third party named Jmobilecore.
Its nice to use.. but I'm now facing a problem to show the next page as with softKey(Next Button) action.
this works for the second part not for the first part.. to work this I've to press key Up or down after Next button.
My code snippet is given below:
* AddSurveyUI.java
* Created on March 29, 2009, 2:20 PM
* To change this template, choose Tools | Template Manager
* and open the template in the editor.
package com.bxpress.mid.ui;
import com.jmobilecore.ui.core.Label;
import com.jmobilecore.ui.core.List;
import com.jmobilecore.ui.core.ListComponent;
import com.jmobilecore.ui.core.ListLabel;
import com.jmobilecore.ui.core.ListScreen;
import com.jmobilecore.ui.core.SoftKey;
* @author ronu
public class AddSurveyUI extends ListScreen {
List list;
private String[] mediaType = {"TV", "Radio", "Other"};
String[] subMediaList;
public String item = "";
static AddSurveyUI addSurvey;
ListComponent listComponent;
EntryInfoUI entryInfoUI;
int mediaId = 0;
int state;
public SoftKey next_Btn = new SoftKey(Localization.CC_NEXT_LBL) {
public void performAction() {
getMediaNameList();
if(mediaId !=0){
refresh();
state = 1;
makeServeyUI(subMediaList);
}else if(mediaId == 0){
state = 0;
entryInfoUI.showTransactionTable(Localization.NINTH_FORM_IDENTIFIER);
public SoftKey back_Btn = new SoftKey(Localization.CC_BACK_LBL) {
public void performAction() {
if(state == 0) {
refresh();
entryInfoUI.goNext(Localization.NINTH_FORM_IDENTIFIER);
}else if(state == 1){
BXpress_Keya_2nd_Phase.mydisplay.setCurrent(BXpress_Keya_2nd_Phase.startPage);
/** Creates a new instance of AddSurveyUI */
public AddSurveyUI(String title) {
super(Label.createTitleLabel(title));
this.state = 0;
entryInfoUI = EntryInfoUI.getInstance();
System.out.println("In AddSurveyUI:::: ");
makeServeyUI(mediaType);
public static AddSurveyUI getInstance() {
try {
if(addSurvey == null) {
addSurvey = new AddSurveyUI("BXpress");
return addSurvey;
catch(Exception exp) {
exp.printStackTrace();
return null;
private void makeServeyUI(String[] mediaList) {
try {
System.out.println("In makeServeyUI:::: " + mediaList.length);
for (int i = 0; i < mediaList.length; i++) {
this.add(new ListLabel(mediaList));
softKeyBar.setSoftKey(this.next_Btn, SoftKey.RIGHT);
softKeyBar.setSoftKey(this.back_Btn, SoftKey.LEFT);
} catch(Exception ex) {
ex.printStackTrace();
private String[] getMediaNameList() {
item = getListItem();
System.out.println("In getMediaNameList:::: " + item);
if(item.equals("TV")) {
mediaId = 2;
subMediaList = new String[]{"NTV", "RTV", "CHANNELI"};
} else if(item.equals("Radio")) {
mediaId = 3;
subMediaList = new String[]{"Radio Abc", "Radio Furti", "Radio Today"};
} else if(item.equals("Other")) {
mediaId =4;
subMediaList = new String[]{"Internet", "NewsPaper", "Others"};
} else {
mediaId = 0;
subMediaList = mediaType;
return subMediaList;
private String getListItem() {
System.out.println("in getListItem::::");
listComponent = getFocusedComponent();
String str = listComponent.getText();
return str;
public void refresh() {
this.removeAll();
Can any body pls help me about my step to taken to out this problem???

See here: http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipod
Be sure to choose China as your country though from the drop down list.
B-rock

IPhone 4 blacks out, could not work with just pressing the home button and lock screen button, only worked when I plugged it in the charger

My iPhone 4 started to blackout out of nowhere and it wont work only until I plugged my phone into the charger. It has been going on for several times in a day, where it just randomly blacks out. Do anyone know what is the problem and how do I exactly fix this? thanks

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

After updating to the new browser, my password managing program could not work any longer. I had to go back to the previous version but was wondering when this can be fixed?

RoboForm password manager stopped working when I updated to the latest version of Firefox. I will contact them as well but I am using rf version 6 and would have to pay (again) to update that program to version 7. This is a vital program because I use a lot of different sites and really would like to continue to use with the Firefox browser.

Thanks for your help. I had already done the "forget this device" but had forgotten about the part of entering the passcode with the keyboard in order to pair. I found my instruction sheet after I posted my cry for help and when I did the pairing procedure right, it worked. It's weird that it decided to unpair itself. Both my husband and our daughter have the same keyboard and neither of them have had this happen. At least now I know what to do if it happens in the future.

IMovie shared function could not work

Hi, I am using the latest version of imovie but I cannot upload to youtube. The Share button is not grayed out. The icons just wouldn't come out. Any idea why?

Hi Barry,
iMovie11, SnowLeopard 10.6.7.
Different problem in the trailer:
The main title shows "placeholders" as if the font is missing which it is likely not; I have not messed with fonts in a year.
The placeholders resemble a box with the capital letter "A" within the box bordered by the phrase "BASIC LATIN" on top and bottom of the box and "0000" on the left and "00F7" on the right.
To attempt to repair the malfunction, I eliminated the .plist file but this rids iMovie11 of the projects themselves, so this is no solution.
I quit iMovie and restarted it but the problem persists.
The previous trailer had no font problems, nor problems of any kind. My previous movies made in iMovie11 had no problems either.
What to do?

Gcc could not work

Similar Messages

Maybe you are looking for