Gcc version on intel Mac Tiger OS

Hello.
when I install the oracle 10 over OS intel tiger the c*c++ check phase return error and I pass this error and the manager doesn't install only the db.
It is a big problem?
thanks.

A bigger problem is that no version of Oracle has ever been certified on Tiger.
The only tested and certified version is 10.1.0.3 on 10.3.6 (Panther).

Similar Messages

  • June 10 2012 Firefox automatically updated itself (no choice) on my Intel Mac/Tiger 10.4.11. Can no longer use Firefox, so how do I get back the old one?

    June 10 2012 Firefox automatically updated itself (no choice) on my Intel Mac/Tiger 10.4.11. I can no longer use Firefox. I have an old version of Firefox on my Mac G4, but am scared to use that machine in case that Firefox also automatically updates itself. How can I transfer a copy of that older version of Firefox (from the G4) to the Intel Mac, and how do I stop both versions from then automatically updating? How do I then remove the updated version of Firefox from the Intel Mac, which I cannot use? Thank you for your help.

    esqki FF update to 13 and now you can't open ? sorry about that.
    1. Download (with your safari) a copy of the latest (3.6.28) from your 10.4.11 mac
    from
    ftp://ftp.mozilla.org/pub/mozilla.org/firefox/releases/3.6.28/mac/
    2. '''Trash''' the current Firefox application to do a clean install.
    3. Install the version that you have downloaded (3.6.28).
    Do not select to remove your personal data, your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks or other personal data.
    see also: [https://support.mozilla.org/en-US/kb/install-firefox-mac?redirectlocale=en-US&redirectslug=Installing+Firefox+on+Mac Installing Firefox on Mac]
    after install the 3.6.28 version go to: Options > Advanced > Update tab > Firefox updates, check mark '''Never check for updates (not recommended: security risk)''', click Ok to save it, exit firefox and restart it.
    https://support.mozilla.org/en-US/kb/settings-network-updates-and-encryption#w_update-tab
    thank you

  • CF 8.01 - 32 or 64-bit version on Intel Mac running Leopard?

    I just purchased a new Intel based MacBook Pro notebook which
    is running Leopard. I'm confused as to whether I should install the
    32-bit or the 64-bit version of ColdFusion 8. Can anyone make a
    recommendation? I will be using the built-in CF webserver.
    Thank you!!!
    Lori

    Thank you!

  • PSP Vintage Warmer released Universal Binary for Intel Macs

    For those that care, PSP just released their UB version for Intel Macs. Many of us have been waiting for this and I just downloaded a demo version of this to play with. Supposed to be one of the better multiband compressor type of plug ins out there.

    Just use Debowelerificator version 1.78.
    It sounds much better,and has NO latency,if you use the Triturator presets.
    Cheers

  • Why can't I get tiger to load on my Intel Mac

    I have an Intel Core 2 Duo, imac 6,1. I bought it used with Snow leopard already installed. I partitioned the disk and attempted to load  Tiger 10.4.6 install dvd, but as soon as I put in the disk I get this message : "Mac OS 10.4 can not be installed on this machine". This black faced disc did not come with my computer. Could the disk be a problem ?

    The 6,1 identifies it as an iMac which originally shipped with Mac OS X 10.4.7, and it was purchased used. If a retail Mac OS X 10.4 package isn't listed as being Mac OS X Server on the outside, it isn't one and won't run on an Intel Mac. Apple never released the client Intel version of 10.4 on a retail DVD because all Macs that would have been compatible with it shipped with it.
    (64359)

  • Will new Intel macs support OSX Tiger?

    I work in a testing environment and I need to setup another Tiger computer. We have a few intel macs that have tiger. I need to get another machine and set it up with Tiger. If I purchased a new iMac or mac mini, is there a release of Tiger that will run on these PCs? Also, I have been trying to look for a retail release of Tiger that supports Intel processors. Was a product like this ever shipped?
    Thanks.
    Kelly

    kelly, welcome to Apple Discussions.
    Macs can only run an OS version that they shipped with or a higher version. So if you are looking at a new Mac that has Leopard installed, it can't run Tiger. You'll have to buy an older Mac.
    You can look at this list of G4 & G5 Mac's specs to find which newest-older model will run on Tiger. http://www.everymac.com/systems/apple/index.html
     Cheers, Tom

  • I have a mac osx version 10.6.8 no windows and i am trying to install a program but keep getting can not run in dos mode  ( the disk says on back works on intel mac with parallels or vm fusion) is this program not compatible with my mac?

    i have a mac osx version 10.6.8 no windows installed and i am trying to install a program but keep getting can not run in dos mode  ( the disk says on back works on intel mac with parallels or vm fusion) is this program not compatible with my mac?

    You run Windows in Parallels or Fusion. Then in Windows you install the program.

  • Which version lightroom for non-intel mac 10.5.8

    Which Version of Lightroom works best with a (non-Intel) Mac 10.5.8?  Thank You.

    There is none that Adobe will sell you.  They only supply the most recent version:  LR 5, which requires 10.7.5, I think.  Sometimes you can get the previous version, i.e. LR 4, on Amazon but sometimes those are just scams, too, so you want to make sure you’re buying from Amazon, themselves, not an Amazon-Marketplace vendor.
    To your specific question about what version is compatible with 10.5.8, if you go to the Adobe page for LR Mac updates:
    http://www.adobe.com/support/downloads/product.jsp?product=113 <http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh> &platform=Macintosh
    and click down into the past versions, it appears that LR 3.6 from 12/12/2011, will run on OSX 10.5 but LR 4.x will not, so I don’t think you’ll have much luck with such an old OS.

  • Used Firefox but the 4.0 won't run on my pre-intel mac so need download for version that I can run.

    I have always enjoyed running Firefox on my pre-intel mac OS 10.4 but the current upgrade I was forced to download did not launch. After trying it several times, I went to you website and manually downloaded the only version (4.0) I saw available which overwrote the one I had. But it won't run on this mac.
    Please tell me where I can download a version that will run on my mac.
    Thank you

    The Firefox 3.6.28 version that is offered on that page is the most recent Firefox version that runs on your PPC Mac with OS X 10.4
    *http://www.mozilla.com/en-US/firefox/all-older.html

  • Can I run FCS (1), and Tiger latest upgrade on an Intel Mac?

    Hope this isn't too whacky a question,
    but I just don't know the answer.
    I plan on buying an Intel Mac, but am in the middle of
    a fairly large FCS(1) project and don't want to upgrade to 2.whatever quite yet.
    Can I run Tiger 10.4.11 on an Intel Mac?
    Also running QT 7.3.0
    (ducking)
    Thanks,
    David

    Yes. TIger was the operating system in use when Intel Macs came out. Works fine.
    Leopard? Well...that and FCP on any Mac is a crap shoot.
    Shane

  • Which version of ACR for CS4 on Intel Mac, OSX 10.6.8?

    Which version of ACR for CS4 on Intel Mac, OSX 10.6.8?

    Moving this discussion to the Adobe Camera RAW forum.  You may want to review the updates available at http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Macintosh.

  • Installing Tiger on Intel Mac, do I need a special install disk?

    As in one that's specific to an Intel Mac as opposed to a PowerPC. Just trying to figure this all out.
    Thanks for the help.

    Hi there,
    Yes you do, all the Tiger Install Disks for IntelMacs are Machine specific & Gray in color, add to that, if the IntelMac came with Leopard, then you cannot install Tiger on them. There never was a Retail Tiger Disk for IntelMacs, (maybe 10.4 Server, not sure on that one).

  • Partition w/Tiger and able to use classic on Intel Mac

    (1) Can I partition an Intel-based Mac with Leopard on partition#1 using Scheme GPT and Tiger on partition #2 using Apple Partitioning Map? (2) Would classic work booting from partition #2 with Tiger? Thanks, Bob

    The answer is no classic is not supported on Intel Macs reguardless.
    http://docs.info.apple.com/article.html?artnum=303137
    There is however other classic emulators that you can download.
    http://discussions.apple.com/thread.jspa?messageID=6512539&#6512539
    George

  • Guitar Rig Version 1 on Intel Mac

    Okay guys so i am thinking of getting an Intel based Mac. I have kontakt 2 so thats safe i assume. But i have Guitar Rig Version 1, will this run on the intel mac? without having to buy the upgrade to 2.2?

    Okay guys so i am thinking of getting an Intel based
    Mac. I have kontakt 2 so thats safe i assume.
    The UB upgrade is $29 for Kontakt
    But i
    have Guitar Rig Version 1, will this run on the intel
    mac? without having to buy the upgrade to 2.2?
    No, it will not work on intel macs. You need to upgrade to 2.2
    good luck.

  • Possible to move a virtual PC from VirtualPC to Tiger on Intel Mac?

    I am migrating from a G5 running Panther to an Intel Mac running Tiger. I've got VirtualPC on the G5, and a virtual machine all set up. I know there are several possible solutions for running WinXP stuff on the Intel Mac. Is there any way, other than starting from scratch, to move this virtual XP machine from the G5 to have it run on the Intel (whether with or without VirtualPC)? If not, what's the easiest way to set up a WinXP environment on my Intel Mac (I have a couple of PC-only applications I need to run)?
    Mike

    Let us know how you make out.
    the good news is that it worked flawlessly - in about 15 minutes, my VPC .vhd file was automatically converted by "Transporter" (part of Parallels) into a valid virtual machine that ran just like it used to, on my new Mac Pro. Cool. The bad news is that it's now saying that since the "hardware" has changed, it wants me to authorize/authenticate/activate the XP installation. It says I have 3 days to do it. I see some posts on-line about converting the original VPC CD-ROM set into something that can be installed into a brand new Parallels virtual machine, but in my case, I already have one and I don't have a real PC on which to do the steps they suggest. So, I haven't quite figured out what to do about this issue yet...

Maybe you are looking for

  • Fax via Network Multi-Function Printer

    I own a HP Multi-Function device to print, scan, fax, etc. My home network is set up to PRINT wirelessly from my computer to my printer, but for some reason I am unable to FAX wirelessly. As of now I must first print the document then fax it manually

  • Multiple Accounts on one iPad

    So, here's the situation, my wife received an iPad from her school she teaches at, as she's starting a new program with the kids there where each one will have an iPad as a learning tool during class. So it's technically the school's device, but she

  • Airport no longer operates after Leopard Upgrade in MacBook Pr0 17

    For my macBook pro 17" I purchased and loaded Leopard OS two months ago. Ever since my AIRPORT HAS NOT WORKED CORRECTLY, and with the last update installed I have been unable to use Airport at all. The connection is either completely GONE or fades ev

  • Importing XML - white spaces before tags

    Hello, I'm importing XML into an inDesign document. Everything imports fine but I get extra spaces whenever there is a paragraph return. How could I get rid of those extra white spaces? I don't want to go and edit out all those white spaces by hand..

  • MAILTO OPENS A NAVIGATION PAGE ON OUTLOOK...

    I just changed the associated application for MAILTO to OUTLOOK (2007). When I try to send a link by a mail it opens a new OUTLOOK and tries to navigate?!. Then I have the message NAVIGATION TO THE WEB PAGE WAS CANCELLED