GCCFSS has its own Forum
Please submit bugs and suggestions for improvements with GCC For SPARC Systems to this Forum.
I am not sure I am right either. http://cooltools.sunsource.net/gcc says "We are proud to announce the availability of a new release of GCC for Sun Systems release 4.2.0. ... With the latest release ... we are also providing GCC compilers that hosted and targeted to the Intel and AMD Solaris systems." I think the Solaris system running on Intel and AMD is Solaris 10. That's why I said GCCFSS 4.2.0 is now available on Solaris 10/x86 platform.
I do feel, though, Sun should do a better job explaining the switch from "GCC for SPARC Systems" to "GCC for SUN Systems" in GCCFSS 4.2.0; I suspect that there may be something behind it. With some clarification, hopefully people would have a better idea of what GCCFSS is about.
Similar Messages
-
Euro Migration has its own Forum
All:
The forum immediately above "Finance" in the E-Business Suite forums is called "Euro Migration".
We in the EuroTeam will probably spot your inputs and questions sooner if you post them there!
Thank you,
EuroTeamI am not sure I am right either. http://cooltools.sunsource.net/gcc says "We are proud to announce the availability of a new release of GCC for Sun Systems release 4.2.0. ... With the latest release ... we are also providing GCC compilers that hosted and targeted to the Intel and AMD Solaris systems." I think the Solaris system running on Intel and AMD is Solaris 10. That's why I said GCCFSS 4.2.0 is now available on Solaris 10/x86 platform.
I do feel, though, Sun should do a better job explaining the switch from "GCC for SPARC Systems" to "GCC for SUN Systems" in GCCFSS 4.2.0; I suspect that there may be something behind it. With some clarification, hopefully people would have a better idea of what GCCFSS is about. -
After ios 8 update I can no longer play music through my car. I have a 2012 Nissan Rogue - which has its own cable made to use with iPhone 4 - I use a apple adapter to converst to use with 5. Has been working fine up until update. Is there a fix for this? The car does not have usb
Here I come to save the daaaaaaaaaay!!!
Had the same issue with my Nissan Rogue 2011.
This listed below will fix it...
Go to General > Restrictions > CarPlay -- Make sure Carplay is DISABLED. (The new IOS 8 enables this on default)
Go to General > Reset > Reset Network Settings
The Nissan Rogue radio system was never designed to work with CarPlay. By default, CarPlay feature comes enabled when you install IOS 8. Suckz, right?
You're very welcome! Have a great day!
Sincerely,
The Superhero -
ERROR B191 - IDoc has its own logical system as receiver
I everybody, i'm tryng to execute a package to charge a ODS from another ODS (Datamart) but the process ends with the error "IDoc has its own logical system as receiver", can you help me with is?
What should be the reason for this error? What can i make to solve it?
Thanks to allHi Reddy,
please let me know how did u solve this issue, even i have the same requirement and am gettign status 29.
Thanks
Rakesh -
i have a iphone4s and an ipod 4th gen, they both share same itunes acc, the ipod has its own email but when people try to FT it also rings on my phone, how do i stop it ringing both devices
That's because you're using the same Apple ID on both devices. On your phone: Settings>FaceTime>You Can Be Reached at>Remove your Apple ID.
-
I have two Airport Expresses running at my house. Both are connected to different types of speakers. Neither speaker set has its own equalizer, and both require a different EQ setting to sound just right. Does anyone know of a way to have iTunes automatically change its EQ setting based on which Airport Express it is streaming to?
I'm in the same boat. I have a 6 zone amplifier running with 6 airport expresses to different rooms inside and outside the house. Each has it's own acoustic characteristics. I'd really love to be able to set each airport to equalize based on my SPL frequency sweep I did for each room.
Setting the eq in itunes won't do it as that is global plus I have many more sources for auiod other than itunes that use the AEs directly. -
How can i make a slideshow to use in muse where each slide has its own hyperlink
I want to make a slideshow to use in muse where each slide has its own hyperlink to another page in the site.
example here: Genesis Bicycles - Easton PA
I see how slideshows can be made in muse, but haven't seen where you can assign a hyperlink to each image.
I would like it to be html5 compatible.
Thanks ,
markHey Mac, thanks for the feedback. I did some research on composition widget, still not finding how I can use that to make a slide show like the one on www.Genesisbicycles.com home page , could you elaborate on how to or maybe link a tutorial for me. It would be a big help.
mark -
After installing the new Yosemite OS on my Macbook pro late 2013 touch trap has its own mind. Any others with this problem? What should we do?
Even I tried to get back to Maverick but the touch pad doesn't work again. well, it works for a couple hours then start doing things but its own. it is so annoying.Hello josefromlaie,
Thank you for using Apple Support Communities.
The following article provides some effective steps to troubleshoot trackpad issues:
Intel-based Mac notebooks: Troubleshooting unresponsive trackpad issues
Regards,
Jeff D. -
How to make each catergory has its own RenderListItem ?
Hello:
Everyone!
I am using XML Form Builder to creat a Blog,I creat three category which is called most recent blog, topic,bloggers.
I preview the result iview,after I click every category,the RenderListItem is the same.However I need the RenderListItemevery of each category is different.
How can I set?
Thanks in advance!
lexianHi,
I assume that in KM each category has its own folder.
If so then, create XML Resource Renderer for each category and then assign this
XML Resource Renderer to a Layoutset and then assign this Layoutset to the Folder.
In KM to set Layoutset for folder:
Settings --> Presentation -->Select Profile
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c2/6e1965a6b6234b91b3332bdf2d9e23/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/63/5206ff8946ca40b849d6b3e4bb85fb/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/0e/1affa0f8c47447a164998b60025aea/frameset.htm
Step:
1. Creating XML Resource Renderer for each category
2. Creating Layoutsets for each XML Resource Renderer
3. Assing Layoutset for each Folder/category.
Hope this helps
Greetings,
Praveen Gudapati
p.s. Points are always welcome for helpful answers -
Why Equium notebook has no own forum?
Having just bought my first new Toshiba (I've had several 2nd hand ones and liked 'em) - an Equium L20-198 - I thought I'd have a look at this site. I discover each range has a own forum, except the Equium, which I guess must therefore reside in the "Other Notebooks" forum. So, what's the problem, Toshiba, the Equium not good enough to have a own forum? Same with searching for additional memory - checking under 512MB DDR2 (533MHz) Memory Upgrade (which I believe, but am not certain, is what I need) I discover the Equium isn't listed anywhere - very unhelpful to put it mildly.
Hi Cole
I agree with you about Equium forum. We can just hope that moderator will create the Equium forum in near future.
Info about additional memory:
Your notebook can handle with 2GB of RAM and compatible RAM modules are
DDR2-400/533 256MB (PA3389U-1M25)
DDR2-400/533 512MB (PA3412U-1M51)
DDR2-400/533 1GB (PA3411U-1M1G)
Have a nice day! -
When I try to open a gradebook program called powerschool, I get a message that Java is not deteced, but my computer indicates that it has Java. I can't download any version of Java because I get a message that Apple has its own version of java. My computer indicates that no new software updates are needed.
Start here: http://support.apple.com/downloads/#java
-
Does apple has its own internet? I have AT&T right now and its very expensive.
Does apple has its own internet? I have AT&T right now and it is very expensive.
Apple isn't an ISP.
(72287) -
I see why Safari has its own whole forum
The same button for STOP and RELOAD..?! What moron came up with that idea?
E.G. you click stop because it's such a long frickin page and you don't want to load all those ads and don't have a dual-T3 connection, except.... just as you click, the PAGE FINISHES LOADING, so now the button suddenly becomes RE-LOAD instead of STOP, and it starts to reload THE WHOLE BLOODY PAGE AGAIN!!
Or you happen to doubleclick the STOP button, so instead of stopping--which is obviously what you want--it starts to RELOAD the page because as soon as you made that first click, the button instantly became the RELOAD button! Terrible software engineering.
So is there any way to change that, i.e. to reassign or add buttons..?How to add a reload button in Safari 4:
http://www.macosxhints.com/article.php?story=20090627021328498 -
Does tethering my iPad to my iPhone 4s use more data than using an iPad that has it's own data plan?
No, it won't work.. the Airports are not media devices.. they have no brains .. no media extensions.. and itunes must be running on a computer.
You can however watch movies from storage but not with itunes..
See how people use tools like VLC to get around Apple's built in iTunes limitations.
http://www.videolan.org/vlc/download-ios.html
https://itunes.apple.com/gb/app/vlc-streamer/id410031728?mt=8 -
I Own My Phone According to the FCC - AT&T Has Its Own Laws
I was warned! I may have the opportunity to have my family travel internationally with me in August, so I went to the AT&T website and requested that their phones be unlocked so we can pickup some international nano sims while traveling. We had switched over to AT&T from Verizon in December because they offered a great discount for the company I work for. As I filled out each form and then validated them from the e-mail that was sent to me, I systematically received rejections to unlock the phones. I'm thinking to myself that the phones were discounted, but I did pay for them and according to the new law signed in February 2015 and the FCC I own the phones. If I wanted out of the contract they'd hit me with an early termination fee (ETF) which is what I agreed to, but why not unlock my phones?
So I call the number on the rejection e-mail and was told by the rep that they no longer unlock phones till after the agreement period. I explain to him the situation above and he told me it was AT&T's policy and I could keep my existing plan, pay the ETF for each phone and they then could unlock the phones. I then asked asked after the 24 months would AT&T refund the ETF he said no.
He suggested I speak to a supervisor. After about a 20 minute wait he said there was going to be an extended wait and could the supervisor call me back. I gave him my number and 3 hours later my phone has yet to ring.
Now I get to pay full price for my iPhone 5s phones so I can get my phones get unlocked. The service has been great, but now I'm steaming. Then I go to watch TV and the banner now says DirecTV - Part of the AT&T Family. I know, I was warned.
Has anyone logged a complaint with the FCC? Any suggestion?It won't help to complain to the FCC because their ruling allowed carriers to put in place rules like the two-year service contract must be completed first.
"Q: When is my device eligible for unlocking?
Your postpaid device is eligible to be unlocked by a participating provider after you have fulfilled the applicable service contract, completed the device installment plan or paid an early termination fee. Your prepaid device is eligible to be unlocked by a participating provider no later than one year after activation, consistent with reasonable time, payment, or usage requirements.
Q: Can my mobile service provider refuse to unlock my phone because I owe them money or am currently under contract?
Yes. Providers do not have to unlock devices for customers or former customers that are not in good standing. You should contact your mobile service provider to understand the terms and conditions of your agreement and your provider's unlocking policies."
The quotes are from the FCC's website at: https://www.fcc.gov/device-unlocking-faq
Maybe you are looking for
-
Console on Wblogic 9.2 locking up administration server
I am upgrading a 7.0 server to 9.2. Its on a real slow and old sun box. Every 3 or 4 things that I do seems to cause the console to stop responding. The console worked great in 7.0. When I do a prstat on the server I see the process is taking up 47%
-
Quicktime 7.5 for windows won't recognize mp4 format
I am trying to play an mp4 video on my PC with Windows XP. I'm trying to use quicktime 7.5, but when I try and open the file I get the following error: "Error -2048: Couldn't open the file MYGREATDVD.mp4 because it is not a file that Quicktime unders
-
How Can I Make The Corner of My Clips Curve Instead of Square (Suzuki Clip)
I need to make the *corners of my clips rounded* instead of square (Like the *Suzuki commercial* example in FCP Training DVD)I have looked everywhere in the manual and in Motion. I have search YouTube as well. does anyone here know how to do that? Th
-
Play files out of a firewire port with Quicktime 7 pro?
Does anyone know if this is possible? I playback preview files (mov,dv, etc) on quicktime pro all the time, and it would be helpful if I could view them on my plasma via my firewire port (the same way I do in Logic or Pro Tools).
-
Can numbers sort by more than one column? How?
Can numbers sort by more than one column? How?