Gdiplus.dll not found when installing itunes 10

Hi, went to open iTunes today after a few weeks of not using it, received the following msg: 'iTunes exe: unable to locate component, this application has failed to start because gdiplus.dll was not found. Reinstalling may fix this problem' so I downloaded itunes 10, restarted etc, got this error again followed by 'iTunes was not installed correctly, please reinstall iTunes. Error 7 (Windows error 126)'. I've uninstalled & downloaded iTunes again but no joy, can anyone help please?

Curses.
One trouble with Gdiplus.dll troubleshooting is that there are so many of the little beggars on a PC. I've got 18, for example. The capitalisation of the copy you're having trouble with indicates the copy in question might be down in your Side-by-side configuration, but there's a lot of different ones down there too.
Okay ... if it's one of the Side-by-Side copies that is giving us grief, then plausibly a repair install of your .net framework may be of some assistance as per:
[iTunes for Windows: "iTunes was not installed properly. Please reinstall iTunes" message|http://support.apple.com/kb/TS3074]
... any luck with that, supple?

Similar Messages

HELP"apple application support not found when installing itunes after a hard drive crash and replace

HELP" error "apple application support not found" when downloading itunes after a hard drive crash and replacement????

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Problems with MSVCR80.dll not found, cannot install itunes

tt2, I'm using your instructions given earlier about removing 5 apps and downloading iTunes. I got lost at 're-installing' using run as administrator or administrator rights. How do I do that? I assume its ok to see the error message that the system can't find AppleApp Support. Can you help me?

Follow the instructions of tt2 in https://discussions.apple.com/thread/5822086

HP Deskjet Ink Advantage K209a Driver not found when installing windows 8

MY PRINTER " HP Deskjet Ink Advantage K209a" OPERATING SYSTEM Windows 8 32 bit
Driver not found when installing windows 8 .So,please give me a suggestion & give me new driver for win 8.
[Personal Information Removed]
Please give me a suggestion

Hey 101214,
I see you have a Windows 8 PC and a Deskjet Ink Advantage All-in-One printer (K209a). I also see that you need a driver link for this OS and Printer. Please follow the link below to download the driver for this printer/OS combo.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-109242-1&cc=us&dlc=en&lc=en...
If you need information on how to perform the USB installation on your Windows 8 PC please click here.
I wish you the best!
Jason
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Updated itunes today now wont open getting message.......MSVCR80.dll not found cannot open itunes.......any ideas??

updated itunes today now wont open getting message MSVCR80.dll not found......reinstalled itunes several times still not able to open itunes....any ideas?

iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue
Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process.

Sqlora11.dll not found when running Pro*C application on 11g server

Hello,
Here is my environment:
Workstation: Windows XP (32bit) with Oracle Client 11g 32bit
Server: Windows 2003 server 64bit with Oracle 11g 64bit
I have a Pro*C program that I have been able to pre-compiled, compiled and linked on my workstation using Mingw/gcc compiler and standard include files (sdtio.h...) from MS Visual C++ 2005 Express Edition.
Precompilation: E:\app\oracle\product\11.1.0\client_1\BIN\proc.exe iname=Fill_Translated.pc oname=Fill_Translated.c userid=xxx/yyy@my11gDB code=ansi_c parse=full mode=oracle dynamic=oracle lines=yes sqlcheck=semantics errors=yes sys_include="C:\Program Files\Microsoft Visual Studio 8\VC\include" include=("E:\app\oracle\product\11.1.0\client_1\precomp\public","E:\app\oracle\product\11.1.0\client_1\oci\include")
Compilation: c:\mingw\bin\gcc.exe -c Fill_Translated.c -o Fill_Translated.o -Wall -I E:\app\oracle\product\11.1.0\client_1\precomp\public -I E:\app\oracle\product\11.1.0\client_1\oci\include
Link: c:\mingw\bin\gcc.exe -o Fill_Translated.exe Fill_Translated.o -L E:\app\oracle\product\11.1.0\client_1\precomp\LIB\ -lorasql11
The result is an executable file that gets connected to an 11g database hosted on a w2003 64-bit server, opens a table with blob fields and expands the blob content into a target table (one blob source record generates thousands of target records). Everything works fine when running from my workstation.
For some reasons, this executable file must run on the O11g server itself. So I copied and pasted the executable file on the server and tried to run it. I thought it would work...
But I get the following error message in a popup window: This application has failed to start because orasql11.dll was not found. Re-installing the application may fix this problem.
At this point, I do not know anymore what to do to solve this problem !
Does it come from the fact that the complete build have been done on a Windows 32bit platform and the server is a 64-bit platform ?
Do I have to install a O11g 64bit client on my server to make it work ?
Do I have to rebuild everything from the server, meaning that I must install a kind of development environment on my server (Mingw/gcc and so on) ?
Is there something to change in the registry of the server or in the path environment variable so that this dll is found ?
Any others ideas ??
Thank you for your answers.

Actually, I do not have any O11g client installed on my Oracle server. But the DLL exists in my $ORACLE_HOME/lib on my server, more precisely in E:\app\dev_ora\product\11.1.0\db_1\BIN.
As I built my executable file on a win32 platform with O11g client 32bit installed, I was wondering if the same executable file copied onto the server was not trying to find the relevant 32 bit library on my win64 platform, which of course does not exists as I have only a 64bit version of this library !! Would-it be the cause of the problem ?
Does an O11g 32bit client installation on my Oracle 11g 64bit server would solve the problem ? Any inconvenient to have on the same server both an O11g 64bit server and an O11g 32bit client if it appears to be the solution ?

Data1.cab not found when installing msi bluetooth

Hi
I just bought an MSI bluetooth pc2pc and when I am trying to install its software on my Windows XP, it keeps on saying to me that an error occured. The error number is 1311. It says "source file not found: E:/Blue Tooth/data1.cab. Verify that the file exists and you can access it."
In this window only a retry and a cancel button appears and when I press retry, this window comes again asking for this .cab file. I cannot even search for this file somewhere else on my PC. If I press cancel it rollbacks everything leaving me with no Bluetooth software and obviously no bluetooth connection.
I also tried to change its software CD and I also changed the bluetooth device to no avvail.
IS THIS A PROBLEM ON MY WINDOWS OR A PROBLEM FROM THE INSTALLATION CD.
Please Help me cause if there is a problem with the bluetooth package I have to return it back

Just curious can you extract the file with winrar and then install. I haven't run across your particular error but that has resolved other issues for me.
Regards,
Tim

Error "actionlist not found" when installing adobe flash player update

in trying to update adobe flash player i get error "action list not found"I have win XP 32 bit. Have removed old version from my computer before downloading newer version, still will not load.

You should by now be using Firefox 11. (You may well have updated since you posted this question).
Possibly you have tried to download and install the FlashPlayer version intended for Internet Explorer, instead of the plugin for Firefox. (See related thread [/questions/859758#answer-228076] ''When trying to update Adobe Flash Player, message says no ActionList found.'' )
Others may also note there is or was problem with some Flash Upgrades not being detected , but should start a new thread of your own if you have problems. See article [[Yahoo! and at&t mail say your browser is blocking Flash]]

GLIBC_2.3 not found when installing oracle10g on SUSE linux

Hi all,
i am tryring to build a test server of SUSE linux 8 and when installing oracle 10g on the same....i am getting an error
GLIBC_2.3 not found
oracle@testserver:~/database>export DISPLAY=:0.0
oracle@testserver:~/database>./runInstaller
/opt/oracle/database/install/.oui:/lib/libc.so.6: version 'GLIBC_2.3' not found
(required by /opt/oracle/database/install/.oui)
oracle@testserver:~/database>pls suggest me where can i found these rpm i have been tryring to google the same....i have tried on rpmfind.com but not found rpm for suse 8
pls help me...

You should have searched a little bit, but my home server is an OpenSuSE 10.2/64 with Oracle 10g/64, so I will reply:
runInstaller -ignoreSysPrereqsOpenSuSE 10.2/64 works really fine with 10g, installation is straightforward.

CD drive not found after installing Itunes

When I install Itunes on my computer - the computer can not find or open my CD drive at all. If I uninstall and reboot the CD drive shows up and operates. I have tried to reinstall, update drivers, etc with no luck. Any thoughts??

I have seen several other people with the same issue. The problem seems to be some level of incompatibility between the Gear Software CD/DVD filter driver used by iTunes and some CD/DVD drives under Vista. I too have a Dell with the same problem, but I'm not holding my breath for a fix. The only workaround I know of is to to remove the GearAspiWDM filter driver from the registry. If you do this and reboot, your DVD drive will show up again, and iTunes will work except for burning CDs or DVDs. ITunes will also complain about drivers being installed incorrectly whenever you open it.
Here's the registry key to remove:
HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE1 0318}\UpperFilters=GearAspiWDM
I'm not sure whether the problem is with Vista, Gear Software, iTunes, or the Dell DVD drive firmware. But, getting all the parties working together to resolve this one will be next to impossible in my opinion.

"iTunes folder cannot be found" when installing itunes on windows vista

I want to install itunes on windows vista but the itunes installation doesn´t work. The iTunes folder cannot be found and isn´t on the computer

Hi ilseaelfers!
I have an article here for you that can help you troubleshoot this issue with your installation of iTunes:
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Frustrated because I keep getting "action list not found" when installing adobe-reader.

1. I had Adobe-reader installed and working but kept getting pop-up screens telling me to update.
2. Each time I tried updating, an error-message showed up "action list not found".
3a. So I thought deleting adobe-reader and doing a fresh install might work.
3b. Using Goggle-Chrome, I still get the same error-message.
3c. Then trying Internet-Explorer as a browser, I still get the same error-message.
4. The real problem now is I have no Adobe-reader at all and that will make my wife unhappy.
5. Operating-system is XP; I don't know how to tell if I have SP-2 or SP-3 if that makes a difference at all.

This problem has been resolved; ultimately, I found out via Googling that XP-SP2-32bit can only handle Version 9.5.
I am upset that Adobe kept telling me for weeks now that I needed to update but they directed me to an update my system is incapable of handling.
Hence the error "action list not found". Dumb!!! I trusted them that they knew what they were doing.
I felt it would help to uninstall what I had and do a fresh install.
Now in that path, Adobe directed me to download version 9.0, which I did.
Then somehow I found out that version 9.5 is the latest-greatest for my machine.
Why did Adobe not make available 9.5 right away instead of 9.0??? Dumb again!!!!
Nice product though; bad execution.
I'm done venting.

OUI prob JRE not found when installing Oracle8i PE on Win98 (non P4 machine)

Oracle universal installer won't run. Java Runtime Environment not found. Tried installing version 1.1.8 of JRE, but this didn't help. (note: download not CD)

Thank you for your answer. This is the developer suite, and I though this could be installed on win98. I have installed Oracle Database Personal Edition 9i, and It works fine. Now I just want to practice my lessons with forms and reports, being able to connect to my oracle personal 9i (stand alone).
Thats why I want to install the Developer Suite 10g, but if this is not for win98, can someone tellme wich version of developer suite could I install in order to practice oracle forms and reports and eventually all the other applications of the suite?

[SOLVED]pm-quirks not found when installing e17

Hello,
I want to install e17, following the Archlinux Wiki (https://wiki.archlinux.org/index.php/E17).
I used the ArchE17 script . But at the very begining it complains pm-quirks 0.20100619-1 not found
pm-quirks is recquired by pm-utils, needed to compil the whole e17 environment.
How shall I deal with this issue? Manually install pm-quirks first, before running the script?
TY
EDIT : I used the folowing comman : $ sudo pacman-S e-svn to install.
Be sure to enable the [extra] repo in your pacman.conf
Last edited by gabx (2011-12-10 11:52:47)

why dont you install e17 manually using "pacman -S e-svn" or "e17-svn"
and it will install, i always install it this way never used e17 script so can help you with script

Migration monitor (migmon.jar) not found when installing Solman 4.0

Hi again all,
I am doing the installation of the database instance for Solution Manager 4.0 and at the Import ABAP step, it ends with the following error:
WARNING 2007-09-20 17:22:32
Execution of the command "/opt/IBMJava2-amd64-142/bin/java -classpath migmon.jar
-showversion com.sap.inst.migmon.imp.ImportMonitor -dbType ORA -importDirs /u02
/sap/EXP1:/u02/sap/EXP2:/u02/sap/EXP3:/u02/sap/EXP4 -installDir /tmp/sapinst_ins
tdir/SOLMAN/SYSTEM/ORA/DISTRIBUTED/AS/DB -orderBy "" -r3loadExe /usr/sap/SMD/SYS
/exe/run/R3load -tskFiles yes -extFiles yes -dbCodepage 4103 -jobNum 3 -monitorT
imeout 30 -loadArgs " -stop_on_error" -trace all -sapinst" finished with return
code 1. Output:
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 2.2)
IBM J9SE VM (build 2.2, J2RE 1.4.2 IBM J9 2.2 Linux amd64-64 j9xa64142ifx-200703
28 (JIT enabled)
J9VM - 20070327_1654_LHdSMr
JIT - r7_level20061020_1803ifx1)
The java class is not found: com.sap.inst.migmon.imp.ImportMonitor
The migmon.jar file is not present anywhere on the server. It appears that this is needed for doing system copies but why is it looking for it here since this is just a fresh installation and not a system copy? And more importantly, how do I resolve this?
Steve

Read the first sentence of my first reply to your question
The tool to import data is called "Migration Monitor" because it was initially developed assisting on migrations of systems. Since the process itself is the same (R3load export/import), it was integrated in the installer. Don't let the name confuse you.
Markus

Gdiplus.dll not found when installing itunes 10

Similar Messages

Maybe you are looking for