GDM and GNOME has died...
Hello! I'm currently posting via a Knoppix Live CD. This is because, after doing a system update yesterday, GDM and GNOME no longer work.
I mostly received kdemod-4.1 updates.
GDM crashes constantly now and if I just get to a prompt and run
exec gnome-session
An error message is displayed (can't make out what it is, it goes to fast) and then I'm logged out.
How can I resolve? I currently can't log into ANY desktop environment at all.
/izo\
finferflu wrote:Look into /var/log/Xorg.0.log, you should be able to see some error there.
Thanks for the response! I've looked at the log, but I'm afraid a large chunk of it means very little to me.
This is the log:
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.25-ARCH i686
Current Operating System: Linux kether 2.6.25-ARCH #1 SMP PREEMPT Mon Jul 14 15:25:51 UTC 2008 i686
Build Date: 21 June 2008 05:47:59PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Aug 6 14:28:32 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/X11/fonts/100dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/100dpi" does not exist.
Entry deleted from font path.
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(==) |-->Input Device "Generic Keyboard"
(==) The core keyboard device wasn't specified explicitly in the layout.
Using the first core keyboard device.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81e0a60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2560 card 1734,1003 rev 01 class 06,00,00 hdr 00
(II) PCI: 00:02:0: chip 8086,2562 card 1734,1003 rev 01 class 03,00,00 hdr 00
(II) PCI: 00:1d:0: chip 8086,24c2 card 1734,1004 rev 01 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,24c4 card 1734,1004 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,24c7 card 1734,1004 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,24cd card 1734,1004 rev 01 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev 81 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,24c0 card 0000,0000 rev 01 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,24cb card 1734,1004 rev 01 class 01,01,8a hdr 00
(II) PCI: 00:1f:3: chip 8086,24c3 card 1734,1004 rev 01 class 0c,05,00 hdr 00
(II) PCI: 00:1f:5: chip 8086,24c5 card 1734,0088 rev 01 class 04,01,00 hdr 00
(II) PCI: 02:08:0: chip 8086,103b card 1734,1002 rev 81 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00003000 - 0x000030ff (0x100) IX[b]
[1] -1 0 0x00003400 - 0x000034ff (0x100) IX[b]
[2] -1 0 0x00003800 - 0x000038ff (0x100) IX[b]
[3] -1 0 0x00003c00 - 0x00003cff (0x100) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xd0100000 - 0xd01fffff (0x100000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:2:0) Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device rev 1, Mem @ 0xd8000000/27, 0xd0000000/19
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xefffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xd0100000 - 0xd0100fff (0x1000) MX[b]
[1] -1 0 0xd0080800 - 0xd00808ff (0x100) MX[b]
[2] -1 0 0xd0080c00 - 0xd0080dff (0x200) MX[b]
[3] -1 0 0x30000000 - 0x300003ff (0x400) MX[b]
[4] -1 0 0xd0080000 - 0xd00803ff (0x400) MX[b]
[5] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[6] -1 0 0xd0000000 - 0xd007ffff (0x80000) MX[b](B)
[7] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[8] -1 0 0x00003000 - 0x0000303f (0x40) IX[b]
[9] -1 0 0x00002000 - 0x0000203f (0x40) IX[b]
[10] -1 0 0x00002400 - 0x000024ff (0x100) IX[b]
[11] -1 0 0x00001c00 - 0x00001c1f (0x20) IX[b]
[12] -1 0 0x00002800 - 0x0000280f (0x10) IX[b]
[13] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[14] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[15] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[16] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[17] -1 0 0x00001800 - 0x0000181f (0x20) IX[b]
[18] -1 0 0x00001400 - 0x0000141f (0x20) IX[b]
[19] -1 0 0x00001000 - 0x0000101f (0x20) IX[b]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xd0100000 - 0xd0100fff (0x1000) MX[b]
[1] -1 0 0xd0080800 - 0xd00808ff (0x100) MX[b]
[2] -1 0 0xd0080c00 - 0xd0080dff (0x200) MX[b]
[3] -1 0 0x30000000 - 0x300003ff (0x400) MX[b]
[4] -1 0 0xd0080000 - 0xd00803ff (0x400) MX[b]
[5] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[6] -1 0 0xd0000000 - 0xd007ffff (0x80000) MX[b](B)
[7] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[8] -1 0 0x00003000 - 0x0000303f (0x40) IX[b]
[9] -1 0 0x00002000 - 0x0000203f (0x40) IX[b]
[10] -1 0 0x00002400 - 0x000024ff (0x100) IX[b]
[11] -1 0 0x00001c00 - 0x00001c1f (0x20) IX[b]
[12] -1 0 0x00002800 - 0x0000280f (0x10) IX[b]
[13] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[14] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[15] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[16] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[17] -1 0 0x00001800 - 0x0000181f (0x20) IX[b]
[18] -1 0 0x00001400 - 0x0000141f (0x20) IX[b]
[19] -1 0 0x00001000 - 0x0000101f (0x20) IX[b]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x2fffffff (0x2ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x2fffffff (0x2ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd0100000 - 0xd0100fff (0x1000) MX[b]
[5] -1 0 0xd0080800 - 0xd00808ff (0x100) MX[b]
[6] -1 0 0xd0080c00 - 0xd0080dff (0x200) MX[b]
[7] -1 0 0x30000000 - 0x300003ff (0x400) MX[b]
[8] -1 0 0xd0080000 - 0xd00803ff (0x400) MX[b]
[9] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[10] -1 0 0xd0000000 - 0xd007ffff (0x80000) MX[b](B)
[11] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[14] -1 0 0x00003000 - 0x0000303f (0x40) IX[b]
[15] -1 0 0x00002000 - 0x0000203f (0x40) IX[b]
[16] -1 0 0x00002400 - 0x000024ff (0x100) IX[b]
[17] -1 0 0x00001c00 - 0x00001c1f (0x20) IX[b]
[18] -1 0 0x00002800 - 0x0000280f (0x10) IX[b]
[19] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[20] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[21] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[23] -1 0 0x00001800 - 0x0000181f (0x20) IX[b]
[24] -1 0 0x00001400 - 0x0000141f (0x20) IX[b]
[25] -1 0 0x00001000 - 0x0000101f (0x20) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DEC-XTRAP
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 2.3.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33, Intel Integrated Graphics Device
(II) Primary Device is: PCI 00:02:0
(--) Chipset 845G found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x2fffffff (0x2ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd0100000 - 0xd0100fff (0x1000) MX[b]
[5] -1 0 0xd0080800 - 0xd00808ff (0x100) MX[b]
[6] -1 0 0xd0080c00 - 0xd0080dff (0x200) MX[b]
[7] -1 0 0x30000000 - 0x300003ff (0x400) MX[b]
[8] -1 0 0xd0080000 - 0xd00803ff (0x400) MX[b]
[9] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[10] -1 0 0xd0000000 - 0xd007ffff (0x80000) MX[b](B)
[11] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[14] -1 0 0x00003000 - 0x0000303f (0x40) IX[b]
[15] -1 0 0x00002000 - 0x0000203f (0x40) IX[b]
[16] -1 0 0x00002400 - 0x000024ff (0x100) IX[b]
[17] -1 0 0x00001c00 - 0x00001c1f (0x20) IX[b]
[18] -1 0 0x00002800 - 0x0000280f (0x10) IX[b]
[19] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[20] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[21] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[23] -1 0 0x00001800 - 0x0000181f (0x20) IX[b]
[24] -1 0 0x00001400 - 0x0000141f (0x20) IX[b]
[25] -1 0 0x00001000 - 0x0000101f (0x20) IX[b]
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x2fffffff (0x2ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd0100000 - 0xd0100fff (0x1000) MX[b]
[5] -1 0 0xd0080800 - 0xd00808ff (0x100) MX[b]
[6] -1 0 0xd0080c00 - 0xd0080dff (0x200) MX[b]
[7] -1 0 0x30000000 - 0x300003ff (0x400) MX[b]
[8] -1 0 0xd0080000 - 0xd00803ff (0x400) MX[b]
[9] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[10] -1 0 0xd0000000 - 0xd007ffff (0x80000) MX[b](B)
[11] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[17] -1 0 0x00003000 - 0x0000303f (0x40) IX[b]
[18] -1 0 0x00002000 - 0x0000203f (0x40) IX[b]
[19] -1 0 0x00002400 - 0x000024ff (0x100) IX[b]
[20] -1 0 0x00001c00 - 0x00001c1f (0x20) IX[b]
[21] -1 0 0x00002800 - 0x0000280f (0x10) IX[b]
[22] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[23] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[24] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[25] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[26] -1 0 0x00001800 - 0x0000181f (0x20) IX[b]
[27] -1 0 0x00001400 - 0x0000141f (0x20) IX[b]
[28] -1 0 0x00001000 - 0x0000101f (0x20) IX[b]
[29] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[30] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.1.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(==) intel(0): Depth 24, (==) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "AccelMethod" "EXA"
(II) intel(0): Integrated Graphics Chipset: Intel(R) 845G
(--) intel(0): Chipset: "845G"
(--) intel(0): Linear framebuffer at 0xD8000000
(--) intel(0): IO registers at addr 0xD0000000
(II) intel(0): 1 display pipe available.
(**) intel(0): Using EXA for acceleration
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "DVODDC_D" initialized.
(II) Loading sub module "sil164"
(II) LoadModule: "sil164"
(II) Loading /usr/lib/xorg/modules/drivers//sil164.so
(II) Module sil164: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7xxx"
(II) LoadModule: "ch7xxx"
(II) Loading /usr/lib/xorg/modules/drivers//ch7xxx.so
(II) Module ch7xxx: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ivch"
(II) LoadModule: "ivch"
(II) Loading /usr/lib/xorg/modules/drivers//ivch.so
(II) Module ivch: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_B" initialized.
(II) Loading sub module "tfp410"
(II) LoadModule: "tfp410"
(II) Loading /usr/lib/xorg/modules/drivers//tfp410.so
(II) Module tfp410: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) intel(0): I2C bus "DVOI2C_B" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7017"
(II) LoadModule: "ch7017"
(II) Loading /usr/lib/xorg/modules/drivers//ch7017.so
(II) Module ch7017: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVODDC_D" removed.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "CMO", prod id 8744
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
(II) intel(0): Modeline "1280x960"x59.9 101.25 1280 1360 1488 1696 960 963 967 996 -hsync +vsync (59.7 kHz)
(II) intel(0): Modeline "1152x864"x74.8 104.00 1152 1224 1344 1536 864 867 871 905 -hsync +vsync (67.7 kHz)
(II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1528 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
(II) intel(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
(II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz)
(II) intel(0): Modeline "1360x765"x59.8 84.50 1360 1432 1568 1776 765 768 773 795 -hsync +vsync (47.6 kHz)
(II) intel(0): EDID vendor "CMO", prod id 8744
(II) intel(0): Output VGA connected
(II) intel(0): Output VGA using initial mode 1680x1050
(II) intel(0): detected 128 kB GTT.
(II) intel(0): detected 8060 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Intel XvMC decoder disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(**) intel(0): Display dimensions: (338, 211) mm
(WW) intel(0): Probed monitor is 470x300 mm, using Displaysize 338x211 mm
(**) intel(0): DPI set to (126, 202)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 2.2.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xd0000000 - 0xd007ffff (0x80000) MS[b]
[1] 0 0 0xd8000000 - 0xdfffffff (0x8000000) MS[b]
[2] -1 0 0x00100000 - 0x2fffffff (0x2ff00000) MX[b]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[6] -1 0 0xd0100000 - 0xd0100fff (0x1000) MX[b]
[7] -1 0 0xd0080800 - 0xd00808ff (0x100) MX[b]
[8] -1 0 0xd0080c00 - 0xd0080dff (0x200) MX[b]
[9] -1 0 0x30000000 - 0x300003ff (0x400) MX[b]
[10] -1 0 0xd0080000 - 0xd00803ff (0x400) MX[b]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[12] -1 0 0xd0000000 - 0xd007ffff (0x80000) MX[b](B)
[13] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[19] -1 0 0x00003000 - 0x0000303f (0x40) IX[b]
[20] -1 0 0x00002000 - 0x0000203f (0x40) IX[b]
[21] -1 0 0x00002400 - 0x000024ff (0x100) IX[b]
[22] -1 0 0x00001c00 - 0x00001c1f (0x20) IX[b]
[23] -1 0 0x00002800 - 0x0000280f (0x10) IX[b]
[24] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[25] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[26] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[27] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[28] -1 0 0x00001800 - 0x0000181f (0x20) IX[b]
[29] -1 0 0x00001400 - 0x0000141f (0x20) IX[b]
[30] -1 0 0x00001000 - 0x0000101f (0x20) IX[b]
[31] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[32] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 110336 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 441340 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 131072 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(WW) intel(0): Failed to allocate texture space.
(II) intel(0): Tiled allocation failed.
(II) intel(0): Attempting memory allocation with untiled buffers.
(II) intel(0): Untiled allocation successful.
(II) intel(0): [drm] Registers = 0xd0000000
(II) intel(0): [drm] ring buffer = 0xd8000000
(II) intel(0): [drm] mapped front buffer at 0xd87e0000, handle = 0xd87e0000
(II) intel(0): [drm] mapped back buffer at 0xdb42c000, handle = 0xdb42c000
(II) intel(0): [drm] mapped depth buffer at 0xdbf3f000, handle = 0xdbf3f000
(II) intel(0): [drm] mapped classic textures at 0xdca52000, handle = 0xdca52000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(==) intel(0): Write-combining range (0xd8000000,0x8000000)
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(**) intel(0): Option "MigrationHeuristic" "greedy"
(II) EXA(0): Offscreen pixmap area of 34836480 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x007df000 (pgoffset 2015)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x007e0000 (pgoffset 2016)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x012f3000 (pgoffset 4851)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x0342c000 (pgoffset 13356)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x03f3f000 (pgoffset 16191)
(II) intel(0): xf86BindGARTMemory: bind key 5 at 0x04a52000 (pgoffset 19026)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00024fff: HW cursors (20 kB)
(II) intel(0): 0x00025000-0x0002cfff: logical 3D context (32 kB)
(II) intel(0): 0x007df000: end of stolen memory
(II) intel(0): 0x007df000-0x007dffff: overlay registers (4 kB, 0x0000000011fff000 physical
(II) intel(0): 0x007e0000-0x012f2fff: front buffer (11340 kB)
(II) intel(0): 0x012f3000-0x0342bfff: exa offscreen (34020 kB)
(II) intel(0): 0x0342c000-0x03f3efff: back buffer (11340 kB)
(II) intel(0): 0x03f3f000-0x04a51fff: depth buffer (11340 kB)
(II) intel(0): 0x04a52000-0x06a51fff: classic textures (32768 kB)
(II) intel(0): 0x08000000: end of aperture
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Output VGA is connected to pipe A
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(**) Option "dpms"
(**) intel(0): DPMS enabled
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Enabled
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 338 x 211
(**) Option "Protocol" "auto"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/input/mice"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse0: Buttons: 11
(**) Mouse0: Sensitivity: 1
(**) Option "CoreKeyboard"
(**) Generic Keyboard: always reports core events
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "gb"
(**) Generic Keyboard: XkbLayout: "gb"
(**) Option "XkbOptions" "altwin:meta_win,lv3:ralt_switch"
(**) Generic Keyboard: XkbOptions: "altwin:meta_win,lv3:ralt_switch"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(II) evaluating device (Generic Keyboard)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
(II) evaluating device (Mouse0)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(--) Mouse0: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
/izo\
Similar Messages
-
[SOLVED] After upgrade gdm and Gnome don't work.
Hi,
after I did an upgrade I had some ldconfig: errors and fixed them all using pkgfile and reinstallation of quite some packages.
But now starting gdm with
# systemctl start gdm
only leads to a black screen with a cross shaped cursor I can move. Nothing more.
Xorg works -- I'm writing this post from KDE.
I reinstalled gnome and gnome-extra. Still no success.
System is up to date.
Hopefully my logs will help, I have no idea what to do. Thanks for any help. :)
/var/log/Xorg.0.log
[ 384.588]
X.Org X Server 1.14.1
Release Date: 2013-04-17
[ 384.588] X Protocol Version 11, Revision 0
[ 384.588] Build Operating System: Linux 3.8.7-1-ARCH x86_64
[ 384.588] Current Operating System: Linux rolfgang 3.9.4-1-ARCH #1 SMP PREEMPT Sat May 25 16:14:55 CEST 2013 x86_64
[ 384.588] Kernel command line: cryptdevice=/dev/sda2:main root=/dev/mapper/main-root lang=de locale=de_DE.UTF-8 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
[ 384.588] Build Date: 17 April 2013 02:37:06PM
[ 384.588]
[ 384.588] Current version of pixman: 0.30.0
[ 384.588] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 384.588] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 384.589] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 9 00:18:24 2013
[ 384.589] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 384.589] (==) No Layout section. Using the first Screen section.
[ 384.589] (==) No screen section available. Using defaults.
[ 384.589] (**) |-->Screen "Default Screen Section" (0)
[ 384.589] (**) | |-->Monitor "<default monitor>"
[ 384.590] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 384.590] (**) | |-->Device "Intel Graphics"
[ 384.590] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 384.590] (==) Automatically adding devices
[ 384.590] (==) Automatically enabling devices
[ 384.590] (==) Automatically adding GPU devices
[ 384.590] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 384.590] Entry deleted from font path.
[ 384.590] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 384.590] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/
[ 384.590] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 384.590] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 384.590] (II) Loader magic: 0x7fcc20
[ 384.590] (II) Module ABI versions:
[ 384.590] X.Org ANSI C Emulation: 0.4
[ 384.590] X.Org Video Driver: 14.1
[ 384.590] X.Org XInput driver : 19.1
[ 384.590] X.Org Server Extension : 7.0
[ 384.591] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 384.594] (--) PCI:*(0:0:2:0) 8086:0166:144d:c0d3 rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00003000/64
[ 384.594] Initializing built-in extension Generic Event Extension
[ 384.594] Initializing built-in extension SHAPE
[ 384.594] Initializing built-in extension MIT-SHM
[ 384.594] Initializing built-in extension XInputExtension
[ 384.594] Initializing built-in extension XTEST
[ 384.594] Initializing built-in extension BIG-REQUESTS
[ 384.594] Initializing built-in extension SYNC
[ 384.594] Initializing built-in extension XKEYBOARD
[ 384.594] Initializing built-in extension XC-MISC
[ 384.594] Initializing built-in extension SECURITY
[ 384.594] Initializing built-in extension XINERAMA
[ 384.594] Initializing built-in extension XFIXES
[ 384.594] Initializing built-in extension RENDER
[ 384.594] Initializing built-in extension RANDR
[ 384.594] Initializing built-in extension COMPOSITE
[ 384.594] Initializing built-in extension DAMAGE
[ 384.594] Initializing built-in extension MIT-SCREEN-SAVER
[ 384.594] Initializing built-in extension DOUBLE-BUFFER
[ 384.594] Initializing built-in extension RECORD
[ 384.595] Initializing built-in extension DPMS
[ 384.595] Initializing built-in extension X-Resource
[ 384.595] Initializing built-in extension XVideo
[ 384.595] Initializing built-in extension XVideo-MotionCompensation
[ 384.595] Initializing built-in extension XFree86-VidModeExtension
[ 384.595] Initializing built-in extension XFree86-DGA
[ 384.595] Initializing built-in extension XFree86-DRI
[ 384.595] Initializing built-in extension DRI2
[ 384.595] (II) LoadModule: "glx"
[ 384.595] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 384.595] (II) Module glx: vendor="X.Org Foundation"
[ 384.595] compiled for 1.14.1, module version = 1.0.0
[ 384.595] ABI class: X.Org Server Extension, version 7.0
[ 384.595] (==) AIGLX enabled
[ 384.596] Loading extension GLX
[ 384.596] (II) LoadModule: "intel"
[ 384.596] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 384.596] (II) Module intel: vendor="X.Org Foundation"
[ 384.596] compiled for 1.14.1, module version = 2.21.9
[ 384.596] Module class: X.Org Video Driver
[ 384.596] ABI class: X.Org Video Driver, version 14.1
[ 384.596] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), HD Graphics, HD Graphics 4600,
Haswell Desktop (GT3), HD Graphics, HD Graphics 4600,
Haswell Mobile (GT3), HD Graphics, HD Graphics P4600/P4700,
Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
HD Graphics, Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT3), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4400,
HD Graphics 5000, Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Iris(TM) Graphics 5100, Haswell ULT (GT1), Haswell ULT (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4200,
Iris(TM) Graphics 5100, Haswell CRW Desktop (GT1), HD Graphics 4600,
Iris(TM) Pro Graphics 5200, Haswell CRW Mobile (GT1),
HD Graphics 4600, Iris(TM) Pro Graphics 5200,
Haswell CRW Server (GT1), Haswell CRW Server (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, ValleyView PO board
[ 384.597] (++) using VT number 1
[ 384.602] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 384.602] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 384.602] (==) intel(0): RGB weight 888
[ 384.602] (==) intel(0): Default visual is TrueColor
[ 384.602] (**) intel(0): Option "AccelMethod" "sna"
[ 384.603] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
[ 384.603] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[ 384.603] (**) intel(0): Framebuffer tiled
[ 384.603] (**) intel(0): Pixmaps tiled
[ 384.603] (**) intel(0): "Tear free" disabled
[ 384.603] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 384.604] (II) intel(0): Output eDP1 has no monitor section
[ 384.604] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[ 384.605] (II) intel(0): Output VGA1 has no monitor section
[ 384.605] (II) intel(0): Output HDMI1 has no monitor section
[ 384.605] (II) intel(0): Output DP1 has no monitor section
[ 384.606] (II) intel(0): EDID for output eDP1
[ 384.606] (II) intel(0): Manufacturer: SEC Model: 3546 Serial#: 0
[ 384.606] (II) intel(0): Year: 2011 Week: 0
[ 384.606] (II) intel(0): EDID Version: 1.4
[ 384.606] (II) intel(0): Digital Display Input
[ 384.606] (II) intel(0): 8 bits per channel
[ 384.606] (II) intel(0): Digital interface is DisplayPort
[ 384.606] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 16
[ 384.606] (II) intel(0): Gamma: 2.20
[ 384.606] (II) intel(0): No DPMS capabilities specified
[ 384.606] (II) intel(0): Supported color encodings: RGB 4:4:4
[ 384.606] (II) intel(0): First detailed timing is preferred mode
[ 384.606] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 384.606] (II) intel(0): redX: 0.590 redY: 0.340 greenX: 0.330 greenY: 0.540
[ 384.606] (II) intel(0): blueX: 0.155 blueY: 0.135 whiteX: 0.313 whiteY: 0.329
[ 384.606] (II) intel(0): Manufacturer's mask: 0
[ 384.606] (II) intel(0): Supported detailed timing:
[ 384.606] (II) intel(0): clock: 100.4 MHz Image Size: 293 x 165 mm
[ 384.606] (II) intel(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1792 h_border: 0
[ 384.606] (II) intel(0): v_active: 900 v_sync: 902 v_sync_end 907 v_blanking: 932 v_border: 0
[ 384.606] (II) intel(0): Unknown vendor-specific block f
[ 384.606] (II) intel(0): SAMSUNG
[ 384.606] (II) intel(0): LSN133KL018
[ 384.606] (II) intel(0): EDID (in hex):
[ 384.606] (II) intel(0): 00ffffffffffff004ca3463500000000
[ 384.606] (II) intel(0): 00150104a51d10780209e59757548a27
[ 384.606] (II) intel(0): 22505400000001010101010101010101
[ 384.606] (II) intel(0): 010101010101382740c0608420303020
[ 384.606] (II) intel(0): 250025a5100000190000000f00000000
[ 384.606] (II) intel(0): 000000000028800a1e00000000fe0053
[ 384.606] (II) intel(0): 414d53554e470a2020202020000000fe
[ 384.606] (II) intel(0): 004c534e3133334b4c3031380a200003
[ 384.606] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 384.606] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 384.606] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 384.606] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 384.606] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 384.606] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 384.606] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 384.606] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 384.606] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 384.606] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 384.606] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 384.606] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 384.606] (II) intel(0): Printing probed modes for output eDP1
[ 384.606] (II) intel(0): Modeline "1600x900"x60.1 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
[ 384.606] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 384.606] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 384.606] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 384.606] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 384.608] (II) intel(0): EDID for output VGA1
[ 384.608] (II) intel(0): EDID for output HDMI1
[ 384.608] (II) intel(0): EDID for output DP1
[ 384.608] (II) intel(0): Output eDP1 connected
[ 384.608] (II) intel(0): Output VGA1 disconnected
[ 384.608] (II) intel(0): Output HDMI1 disconnected
[ 384.608] (II) intel(0): Output DP1 disconnected
[ 384.608] (II) intel(0): Using exact sizes for initial modes
[ 384.608] (II) intel(0): Output eDP1 using initial mode 1600x900
[ 384.608] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 384.608] (==) intel(0): DPI set to (96, 96)
[ 384.608] (II) Loading sub module "dri2"
[ 384.608] (II) LoadModule: "dri2"
[ 384.608] (II) Module "dri2" already built-in
[ 384.608] (==) Depth 24 pixmap format is 32 bpp
[ 384.608] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
[ 384.608] (==) intel(0): Backing store disabled
[ 384.608] (==) intel(0): Silken mouse enabled
[ 384.608] (II) intel(0): HW Cursor enabled
[ 384.608] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 386.414] (==) intel(0): DPMS enabled
[ 386.414] (II) intel(0): [DRI2] Setup complete
[ 386.414] (II) intel(0): [DRI2] DRI driver: i965
[ 386.414] (II) intel(0): direct rendering: DRI2 Enabled
[ 386.414] (==) intel(0): hotplug detection: "enabled"
[ 386.415] (--) RandR disabled
[ 386.430] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 386.430] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 386.430] (II) AIGLX: enabled GLX_ARB_create_context
[ 386.430] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 386.430] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 386.430] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 386.430] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 386.430] (II) AIGLX: Loaded and initialized i965
[ 386.430] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 386.430] (II) intel(0): switch to mode 1600x900 on pipe 0 using eDP1
[ 386.446] (II) intel(0): Setting screen physical size to 423 x 238
[ 386.508] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 386.508] (**) Power Button: Applying InputClass "system-keyboard"
[ 386.508] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 386.508] (II) LoadModule: "evdev"
[ 386.509] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 386.509] (II) Module evdev: vendor="X.Org Foundation"
[ 386.509] compiled for 1.14.0, module version = 2.8.0
[ 386.509] Module class: X.Org XInput Driver
[ 386.509] ABI class: X.Org XInput driver, version 19.1
[ 386.509] (II) Using input driver 'evdev' for 'Power Button'
[ 386.509] (**) Power Button: always reports core events
[ 386.509] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 386.509] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 386.509] (--) evdev: Power Button: Found keys
[ 386.509] (II) evdev: Power Button: Configuring as keyboard
[ 386.509] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 386.510] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 386.510] (**) Option "xkb_rules" "evdev"
[ 386.510] (**) Option "xkb_model" "evdev"
[ 386.510] (**) Option "xkb_layout" "de"
[ 386.535] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[ 386.535] (**) Video Bus: Applying InputClass "system-keyboard"
[ 386.535] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 386.535] (II) Using input driver 'evdev' for 'Video Bus'
[ 386.535] (**) Video Bus: always reports core events
[ 386.535] (**) evdev: Video Bus: Device: "/dev/input/event10"
[ 386.535] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 386.535] (--) evdev: Video Bus: Found keys
[ 386.535] (II) evdev: Video Bus: Configuring as keyboard
[ 386.535] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10/event10"
[ 386.535] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 386.535] (**) Option "xkb_rules" "evdev"
[ 386.535] (**) Option "xkb_model" "evdev"
[ 386.535] (**) Option "xkb_layout" "de"
[ 386.536] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 386.536] (**) Power Button: Applying InputClass "system-keyboard"
[ 386.536] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 386.536] (II) Using input driver 'evdev' for 'Power Button'
[ 386.536] (**) Power Button: always reports core events
[ 386.536] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 386.536] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 386.536] (--) evdev: Power Button: Found keys
[ 386.536] (II) evdev: Power Button: Configuring as keyboard
[ 386.536] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3"
[ 386.536] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 386.536] (**) Option "xkb_rules" "evdev"
[ 386.536] (**) Option "xkb_model" "evdev"
[ 386.536] (**) Option "xkb_layout" "de"
[ 386.536] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 386.536] (II) No input driver specified, ignoring this device.
[ 386.536] (II) This device may have been added with another device file.
[ 386.537] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 386.537] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event5)
[ 386.537] (II) No input driver specified, ignoring this device.
[ 386.537] (II) This device may have been added with another device file.
[ 386.538] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event6)
[ 386.538] (II) No input driver specified, ignoring this device.
[ 386.538] (II) This device may have been added with another device file.
[ 386.538] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event7)
[ 386.538] (II) No input driver specified, ignoring this device.
[ 386.538] (II) This device may have been added with another device file.
[ 386.539] (II) config/udev: Adding input device Webcam SC-13HDL11624N (/dev/input/event8)
[ 386.539] (**) Webcam SC-13HDL11624N: Applying InputClass "system-keyboard"
[ 386.539] (**) Webcam SC-13HDL11624N: Applying InputClass "evdev keyboard catchall"
[ 386.539] (II) Using input driver 'evdev' for 'Webcam SC-13HDL11624N'
[ 386.539] (**) Webcam SC-13HDL11624N: always reports core events
[ 386.539] (**) evdev: Webcam SC-13HDL11624N: Device: "/dev/input/event8"
[ 386.539] (--) evdev: Webcam SC-13HDL11624N: Vendor 0x2232 Product 0x1024
[ 386.539] (--) evdev: Webcam SC-13HDL11624N: Found keys
[ 386.539] (II) evdev: Webcam SC-13HDL11624N: Configuring as keyboard
[ 386.539] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input8/event8"
[ 386.539] (II) XINPUT: Adding extended input device "Webcam SC-13HDL11624N" (type: KEYBOARD, id 9)
[ 386.539] (**) Option "xkb_rules" "evdev"
[ 386.539] (**) Option "xkb_model" "evdev"
[ 386.539] (**) Option "xkb_layout" "de"
[ 386.540] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 386.540] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 386.541] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 386.541] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 386.541] (**) AT Translated Set 2 keyboard: always reports core events
[ 386.541] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 386.541] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 386.541] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 386.541] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 386.541] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 386.541] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 386.541] (**) Option "xkb_rules" "evdev"
[ 386.541] (**) Option "xkb_model" "evdev"
[ 386.541] (**) Option "xkb_layout" "de"
[ 386.542] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event9)
[ 386.542] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 386.542] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 386.542] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 386.542] (**) ETPS/2 Elantech Touchpad: Applying InputClass "disable clickpad buttons"
[ 386.542] (II) LoadModule: "synaptics"
[ 386.542] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 386.543] (II) Module synaptics: vendor="X.Org Foundation"
[ 386.543] compiled for 1.14.1, module version = 1.7.1
[ 386.543] Module class: X.Org XInput Driver
[ 386.543] ABI class: X.Org XInput driver, version 19.1
[ 386.543] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 386.543] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 386.543] (**) Option "Device" "/dev/input/event9"
[ 386.563] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
[ 386.563] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2964 (res 33)
[ 386.563] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1872 (res 32)
[ 386.564] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 386.564] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 386.564] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
[ 386.564] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 386.564] (**) Option "TapButton1" "1"
[ 386.564] (**) Option "TapButton2" "2"
[ 386.564] (**) Option "TapButton3" "3"
[ 386.564] (**) Option "SoftButtonAreas" "0 0 0 0 0 0 0 0"
[ 386.564] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 386.564] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 386.570] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
[ 386.570] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 11)
[ 386.570] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 386.571] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[ 386.571] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.057
[ 386.571] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 386.571] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 386.571] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 386.571] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 386.571] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 386.572] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[ 386.572] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 386.573] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[ 386.573] (II) No input driver specified, ignoring this device.
[ 386.573] (II) This device may have been added with another device file.
[ 386.899] (II) intel(0): EDID vendor "SEC", prod id 13638
[ 386.899] (II) intel(0): Printing DDC gathered Modelines:
[ 386.899] (II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
[ 387.041] (II) intel(0): EDID vendor "SEC", prod id 13638
[ 387.041] (II) intel(0): Printing DDC gathered Modelines:
[ 387.041] (II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
[ 387.069] (II) intel(0): EDID vendor "SEC", prod id 13638
[ 387.069] (II) intel(0): Printing DDC gathered Modelines:
[ 387.069] (II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
[ 389.740] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 391.348] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 391.348] (II) intel(0): switch to mode 1600x900 on pipe 0 using eDP1
[ 391.367] (II) intel(0): EDID vendor "SEC", prod id 13638
[ 391.367] (II) intel(0): Printing DDC gathered Modelines:
[ 391.367] (II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
[ 391.369] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 397.614] (II) AIGLX: Suspending AIGLX clients for VT switch
and
/var/log/gdm/:0.log
X.Org X Server 1.14.1
Release Date: 2013-04-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.8.7-1-ARCH x86_64
Current Operating System: Linux rolfgang 3.9.4-1-ARCH #1 SMP PREEMPT Sat May 25 16:14:55 CEST 2013 x86_64
Kernel command line: cryptdevice=/dev/sda2:main root=/dev/mapper/main-root lang=de locale=de_DE.UTF-8 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
Build Date: 17 April 2013 02:37:06PM
Current version of pixman: 0.30.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 9 00:18:24 2013
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No device specified for screen "Default Screen Section".
Using the first device section listed.
(**) | |-->Device "Intel Graphics"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Automatically adding GPU devices
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
(==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) config/udev: Adding drm device (/dev/dri/card0)
(--) PCI:*(0:0:2:0) 8086:0166:144d:c0d3 rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00003000/64
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.14.1, module version = 1.0.0
(==) AIGLX enabled
Loading extension GLX
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.14.1, module version = 2.21.9
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), HD Graphics, HD Graphics 4600,
Haswell Desktop (GT3), HD Graphics, HD Graphics 4600,
Haswell Mobile (GT3), HD Graphics, HD Graphics P4600/P4700,
Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
HD Graphics, Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT3), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4400,
HD Graphics 5000, Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Iris(TM) Graphics 5100, Haswell ULT (GT1), Haswell ULT (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4200,
Iris(TM) Graphics 5100, Haswell CRW Desktop (GT1), HD Graphics 4600,
Iris(TM) Pro Graphics 5200, Haswell CRW Mobile (GT1),
HD Graphics 4600, Iris(TM) Pro Graphics 5200,
Haswell CRW Server (GT1), Haswell CRW Server (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, ValleyView PO board
(++) using VT number 1
(II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
(--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
(**) intel(0): Framebuffer tiled
(**) intel(0): Pixmaps tiled
(**) intel(0): "Tear free" disabled
(**) intel(0): Forcing per-crtc-pixmaps? no
(II) intel(0): Output eDP1 has no monitor section
(--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
(II) intel(0): Output VGA1 has no monitor section
(II) intel(0): Output HDMI1 has no monitor section
(II) intel(0): Output DP1 has no monitor section
(II) intel(0): EDID for output eDP1
(II) intel(0): Manufacturer: SEC Model: 3546 Serial#: 0
(II) intel(0): Year: 2011 Week: 0
(II) intel(0): EDID Version: 1.4
(II) intel(0): Digital Display Input
(II) intel(0): 8 bits per channel
(II) intel(0): Digital interface is DisplayPort
(II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 16
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified
(II) intel(0): Supported color encodings: RGB 4:4:4
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): Preferred mode is native pixel format and refresh rate
(II) intel(0): redX: 0.590 redY: 0.340 greenX: 0.330 greenY: 0.540
(II) intel(0): blueX: 0.155 blueY: 0.135 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 100.4 MHz Image Size: 293 x 165 mm
(II) intel(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1792 h_border: 0
(II) intel(0): v_active: 900 v_sync: 902 v_sync_end 907 v_blanking: 932 v_border: 0
(II) intel(0): Unknown vendor-specific block f
(II) intel(0): SAMSUNG
(II) intel(0): LSN133KL018
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff004ca3463500000000
(II) intel(0): 00150104a51d10780209e59757548a27
(II) intel(0): 22505400000001010101010101010101
(II) intel(0): 010101010101382740c0608420303020
(II) intel(0): 250025a5100000190000000f00000000
(II) intel(0): 000000000028800a1e00000000fe0053
(II) intel(0): 414d53554e470a2020202020000000fe
(II) intel(0): 004c534e3133334b4c3031380a200003
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Printing probed modes for output eDP1
(II) intel(0): Modeline "1600x900"x60.1 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
(II) intel(0): EDID for output VGA1
(II) intel(0): EDID for output HDMI1
(II) intel(0): EDID for output DP1
(II) intel(0): Output eDP1 connected
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output HDMI1 disconnected
(II) intel(0): Output DP1 disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output eDP1 using initial mode 1600x900
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(==) intel(0): DPI set to (96, 96)
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): HW Cursor enabled
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(II) intel(0): [DRI2] Setup complete
(II) intel(0): [DRI2] DRI driver: i965
(II) intel(0): direct rendering: DRI2 Enabled
(==) intel(0): hotplug detection: "enabled"
(--) RandR disabled
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_INTEL_swap_event
(II) AIGLX: enabled GLX_ARB_create_context
(II) AIGLX: enabled GLX_ARB_create_context_profile
(II) AIGLX: enabled GLX_EXT_create_context_es2_profile
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized i965
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): switch to mode 1600x900 on pipe 0 using eDP1
(II) intel(0): Setting screen physical size to 423 x 238
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "system-keyboard"
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.14.0, module version = 2.8.0
(II) Using input driver 'evdev' for 'Power Button'
(**) Power Button: always reports core events
(**) evdev: Power Button: Device: "/dev/input/event4"
(--) evdev: Power Button: Vendor 0 Product 0x1
(--) evdev: Power Button: Found keys
(II) evdev: Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
(II) config/udev: Adding input device Video Bus (/dev/input/event10)
(**) Video Bus: Applying InputClass "system-keyboard"
(**) Video Bus: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Video Bus'
(**) Video Bus: always reports core events
(**) evdev: Video Bus: Device: "/dev/input/event10"
(--) evdev: Video Bus: Vendor 0 Product 0x6
(--) evdev: Video Bus: Found keys
(II) evdev: Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "system-keyboard"
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Power Button'
(**) Power Button: always reports core events
(**) evdev: Power Button: Device: "/dev/input/event3"
(--) evdev: Power Button: Vendor 0 Product 0x1
(--) evdev: Power Button: Found keys
(II) evdev: Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
(II) config/udev: Adding input device Lid Switch (/dev/input/event2)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding drm device (/dev/dri/card0)
(II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event5)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event6)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event7)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device Webcam SC-13HDL11624N (/dev/input/event8)
(**) Webcam SC-13HDL11624N: Applying InputClass "system-keyboard"
(**) Webcam SC-13HDL11624N: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Webcam SC-13HDL11624N'
(**) Webcam SC-13HDL11624N: always reports core events
(**) evdev: Webcam SC-13HDL11624N: Device: "/dev/input/event8"
(--) evdev: Webcam SC-13HDL11624N: Vendor 0x2232 Product 0x1024
(--) evdev: Webcam SC-13HDL11624N: Found keys
(II) evdev: Webcam SC-13HDL11624N: Configuring as keyboard
(II) XINPUT: Adding extended input device "Webcam SC-13HDL11624N" (type: KEYBOARD, id 9)
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
(**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
(**) AT Translated Set 2 keyboard: always reports core events
(**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
(--) evdev: AT Translated Set 2 keyboard: Found keys
(II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
(II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event9)
(**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
(**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
(**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
(**) ETPS/2 Elantech Touchpad: Applying InputClass "disable clickpad buttons"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.14.1, module version = 1.7.1
(II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
(**) ETPS/2 Elantech Touchpad: always reports core events
(II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
(--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2964 (res 33)
(--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1872 (res 32)
(--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
(--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
(--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
(--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
(--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
(**) ETPS/2 Elantech Touchpad: always reports core events
(II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 11)
(**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
(**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
(**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.057
(**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
(**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
(**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
(**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
(--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
(II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
(**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
(II) config/udev: Adding input device PC Speaker (/dev/input/event1)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) intel(0): EDID vendor "SEC", prod id 13638
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
(II) intel(0): EDID vendor "SEC", prod id 13638
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
(II) intel(0): EDID vendor "SEC", prod id 13638
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): switch to mode 1600x900 on pipe 0 using eDP1
(II) intel(0): EDID vendor "SEC", prod id 13638
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
(--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
(II) AIGLX: Suspending AIGLX clients for VT switch
Last edited by Duxon (2013-06-15 16:17:35)Finally managed fixed it.
libcanberra-pulse from [extra] was broken. I reinstalled it with --force.
Likely that came with the recent pulseaudio upgrade. -
[solved] Blank screen for few seconds between GDM and Gnome-Shell
Hi there,
I don't know if this phenomenon is "normal" or not, so I ask : I am using Gnome 3.6 and after I have logged in on GDM I see a blank screen for roundabout 3 seconds before the gnome-shell starts. The whole system is running fine - so this is no "real" problem -, but this 3 seconds of a black screen between GDM and the gnome-shell are somewhat annoying and I want to find out if this behaviour is normal or not .
Indeed, if I look into journalctl, I find this messages:
Dez 03 21:45:53 sushi gdm-simple-slave[272]: WARNING: Failed to give slave programs access to the display. Trying to proceed.
Dez 03 21:45:53 sushi gdm-launch-environment][305]: GLib-CRITICAL: g_variant_compare: assertion `!g_variant_is_container (a)' failed
Dez 03 21:45:53 sushi gdm-launch-environment][305]: GLib-CRITICAL: g_variant_compare: assertion `!g_variant_is_container (a)' failed
Dez 03 21:46:03 sushi gnome-session[311]: WARNING: Detected that screensaver has left the bus
Dez 03 21:46:03 sushi gnome-session[311]: CRITICAL: gsm_manager_set_phase: assertion `GSM_IS_MANAGER (manager)' failed
Dez 03 21:46:03 sushi gdm-simple-slave[272]: WARNING: Failed to remove slave program access to the display. Trying to proceed.
Dez 03 21:46:03 sushi gdm-simple-slave[272]: WARNING: Child process -311 was already dead.
Dez 03 22:00:50 sushi systemd-tmpfiles[1793]: stat(/run/user/1000/gvfs) failed: Permission denied
Actually, I don't know if this is relevant for my little "black-screen" problem (but it looks as if ...).
And
$ systemctl status gdm.service
shows nothing to worry about (as far as I can see):
gdm.service - GNOME Display Manager
Loaded: loaded (/usr/lib/systemd/system/gdm.service; enabled)
Active: active (running) since Mo, 2012-12-03 21:45:51 CET; 40min ago
Main PID: 266 (gdm-binary)
CGroup: name=systemd:/system/gdm.service
├─266 /usr/sbin/gdm-binary
├─272 /usr/lib/gdm/gdm-simple-slave --display-id /org/gnome/DisplayManager/Displays/_0
├─279 /usr/bin/Xorg :0 -background none -verbose -auth /var/run/gdm/auth-for-gdm-xTnD7p/database -seat seat0 -nolisten tcp vt1
└─440 gdm-session-worker [pam/gdm-password]
The hardware is an Asrock H77M-ITX board with an Intel GPU. Systemd is up and running well, no failing service units.
Any ideas, what's going on here?
Last edited by swordfish (2012-12-08 14:26:00)Finally I found out what's going on - and it's so simple
It's just my monitor which is runing on a default resolution of 1920x1080. When I switched to 1600x900 using Gnome's system tools, the monitor needs roundabout two seconds to adjust to this resolution -
GDM and Gnome graphical issues with Nvidia card
Hi !
I want to install archlinux with cinnamon as desktop environment on the computer of a friend, but I have some issue with it, and especially with (I think) the graphic card, it's a Nvidia GeForce FX 5200LE.
I tried installing nvidia-173xx from the aur first. I installed gdm, but it's extremly slow, as a result that I can't log in (nevertheless the mouse is fluid..) the cpu is not so much used yet, and it's the same thing in the cinnamon session or the gnome session (I tried installing lightdm to log in which works fine). Moreover, in the session I've got some strange graphical things, such as some missing white pixels, or a blue window when I launch nautilus, ... (here are some screenshots : http://i49.tinypic.com/2efhm6s.png and a with a window : http://i46.tinypic.com/116m05k.png)
I tried to install the nouveau driver instead, and now gdm don't freeze, I can log in, but there is always these strange graphical issues.
Is the graphic card too old for gnome ? Or did I forget something ?
Thank you in advance for your help !! And sorry for my english ..
Here are some log with the nouveau driver :
- Xorg.log :
[ 9.026]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 9.026] X Protocol Version 11, Revision 0
[ 9.026] Build Operating System: Linux 3.4.8-1-ARCH i686
[ 9.026] Current Operating System: Linux famille-workstation 3.5.3-1-ARCH #1 SMP PREEMPT Sun Aug 26 08:15:06 UTC 2012 i686
[ 9.026] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=83840f06-da6c-4558-a8ef-8ed779442ff3 ro quiet pci=nomsi
[ 9.026] Build Date: 27 August 2012 08:08:29AM
[ 9.026]
[ 9.026] Current version of pixman: 0.26.2
[ 9.026] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 9.026] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 9.027] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 5 13:26:01 2012
[ 9.053] (==) Using config file: "/etc/X11/xorg.conf"
[ 9.053] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 9.072] (==) No Layout section. Using the first Screen section.
[ 9.072] (==) No screen section available. Using defaults.
[ 9.072] (**) |-->Screen "Default Screen Section" (0)
[ 9.072] (**) | |-->Monitor "<default monitor>"
[ 9.074] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 9.074] (**) Option "AIGLX" "off"
[ 9.074] (==) Automatically adding devices
[ 9.074] (==) Automatically enabling devices
[ 9.127] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[ 9.127] Entry deleted from font path.
[ 9.128] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[ 9.128] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/Type1/".
[ 9.128] Entry deleted from font path.
[ 9.128] (Run 'mkfontdir' on "/usr/share/fonts/Type1/").
[ 9.128] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 9.128] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 9.128] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 9.128] (II) Loader magic: 0x82225a0
[ 9.128] (II) Module ABI versions:
[ 9.128] X.Org ANSI C Emulation: 0.4
[ 9.128] X.Org Video Driver: 12.1
[ 9.128] X.Org XInput driver : 16.0
[ 9.128] X.Org Server Extension : 6.0
[ 9.129] (--) PCI:*(0:1:0:0) 10de:0323:107d:1334 rev 161, Mem @ 0xe0000000/16777216, 0xd8000000/134217728, BIOS @ 0x????????/131072
[ 9.129] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 9.129] (II) LoadModule: "extmod"
[ 9.145] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 9.156] (II) Module extmod: vendor="X.Org Foundation"
[ 9.156] compiled for 1.12.4, module version = 1.0.0
[ 9.156] Module class: X.Org Server Extension
[ 9.156] ABI class: X.Org Server Extension, version 6.0
[ 9.156] (II) Loading extension MIT-SCREEN-SAVER
[ 9.156] (II) Loading extension XFree86-VidModeExtension
[ 9.156] (II) Loading extension XFree86-DGA
[ 9.156] (II) Loading extension DPMS
[ 9.156] (II) Loading extension XVideo
[ 9.156] (II) Loading extension XVideo-MotionCompensation
[ 9.156] (II) Loading extension X-Resource
[ 9.156] (II) LoadModule: "dbe"
[ 9.157] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 9.157] (II) Module dbe: vendor="X.Org Foundation"
[ 9.157] compiled for 1.12.4, module version = 1.0.0
[ 9.157] Module class: X.Org Server Extension
[ 9.157] ABI class: X.Org Server Extension, version 6.0
[ 9.157] (II) Loading extension DOUBLE-BUFFER
[ 9.157] (II) LoadModule: "glx"
[ 9.157] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 9.164] (II) Module glx: vendor="X.Org Foundation"
[ 9.164] compiled for 1.12.4, module version = 1.0.0
[ 9.164] ABI class: X.Org Server Extension, version 6.0
[ 9.164] (**) AIGLX disabled
[ 9.165] (II) Loading extension GLX
[ 9.165] (II) LoadModule: "record"
[ 9.165] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 9.166] (II) Module record: vendor="X.Org Foundation"
[ 9.166] compiled for 1.12.4, module version = 1.13.0
[ 9.166] Module class: X.Org Server Extension
[ 9.166] ABI class: X.Org Server Extension, version 6.0
[ 9.166] (II) Loading extension RECORD
[ 9.166] (II) LoadModule: "dri"
[ 9.166] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 9.172] (II) Module dri: vendor="X.Org Foundation"
[ 9.172] compiled for 1.12.4, module version = 1.0.0
[ 9.172] ABI class: X.Org Server Extension, version 6.0
[ 9.172] (II) Loading extension XFree86-DRI
[ 9.172] (II) LoadModule: "dri2"
[ 9.172] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 9.173] (II) Module dri2: vendor="X.Org Foundation"
[ 9.173] compiled for 1.12.4, module version = 1.2.0
[ 9.173] ABI class: X.Org Server Extension, version 6.0
[ 9.173] (II) Loading extension DRI2
[ 9.173] (==) Matched nouveau as autoconfigured driver 0
[ 9.173] (==) Matched nvidia as autoconfigured driver 1
[ 9.173] (==) Matched nv as autoconfigured driver 2
[ 9.173] (==) Matched vesa as autoconfigured driver 3
[ 9.173] (==) Matched fbdev as autoconfigured driver 4
[ 9.173] (==) Assigned the driver to the xf86ConfigLayout
[ 9.173] (II) LoadModule: "nouveau"
[ 9.180] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 9.191] (II) Module nouveau: vendor="X.Org Foundation"
[ 9.191] compiled for 1.12.2, module version = 1.0.1
[ 9.191] Module class: X.Org Video Driver
[ 9.191] ABI class: X.Org Video Driver, version 12.0
[ 9.191] (II) LoadModule: "nvidia"
[ 9.191] (WW) Warning, couldn't open module nvidia
[ 9.191] (II) UnloadModule: "nvidia"
[ 9.191] (II) Unloading nvidia
[ 9.192] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 9.192] (II) LoadModule: "nv"
[ 9.192] (WW) Warning, couldn't open module nv
[ 9.192] (II) UnloadModule: "nv"
[ 9.192] (II) Unloading nv
[ 9.192] (EE) Failed to load module "nv" (module does not exist, 0)
[ 9.192] (II) LoadModule: "vesa"
[ 9.192] (WW) Warning, couldn't open module vesa
[ 9.192] (II) UnloadModule: "vesa"
[ 9.192] (II) Unloading vesa
[ 9.192] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 9.192] (II) LoadModule: "fbdev"
[ 9.193] (WW) Warning, couldn't open module fbdev
[ 9.193] (II) UnloadModule: "fbdev"
[ 9.193] (II) Unloading fbdev
[ 9.193] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 9.193] (II) NOUVEAU driver
[ 9.193] (II) NOUVEAU driver for NVIDIA chipset families :
[ 9.193] RIVA TNT (NV04)
[ 9.193] RIVA TNT2 (NV05)
[ 9.193] GeForce 256 (NV10)
[ 9.193] GeForce 2 (NV11, NV15)
[ 9.193] GeForce 4MX (NV17, NV18)
[ 9.193] GeForce 3 (NV20)
[ 9.193] GeForce 4Ti (NV25, NV28)
[ 9.193] GeForce FX (NV3x)
[ 9.193] GeForce 6 (NV4x)
[ 9.193] GeForce 7 (G7x)
[ 9.193] GeForce 8 (G8x)
[ 9.193] GeForce GTX 200 (NVA0)
[ 9.193] GeForce GTX 400 (NVC0)
[ 9.193] (++) using VT number 7
[ 9.196] drmOpenDevice: node name is /dev/dri/card0
[ 9.196] drmOpenDevice: open result is 7, (OK)
[ 9.196] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 9.196] drmOpenDevice: node name is /dev/dri/card0
[ 9.196] drmOpenDevice: open result is 7, (OK)
[ 9.196] drmOpenByBusid: drmOpenMinor returns 7
[ 9.196] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 9.196] (II) [drm] nouveau interface version: 1.0.0
[ 9.196] (II) Loading sub module "dri"
[ 9.196] (II) LoadModule: "dri"
[ 9.197] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 9.197] (II) Module dri: vendor="X.Org Foundation"
[ 9.197] compiled for 1.12.4, module version = 1.0.0
[ 9.197] ABI class: X.Org Server Extension, version 6.0
[ 9.197] (II) NOUVEAU(0): Loaded DRI module
[ 9.197] drmOpenDevice: node name is /dev/dri/card0
[ 9.197] drmOpenDevice: open result is 8, (OK)
[ 9.197] drmOpenDevice: node name is /dev/dri/card0
[ 9.197] drmOpenDevice: open result is 8, (OK)
[ 9.197] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 9.197] drmOpenDevice: node name is /dev/dri/card0
[ 9.197] drmOpenDevice: open result is 8, (OK)
[ 9.197] drmOpenByBusid: drmOpenMinor returns 8
[ 9.197] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 9.197] (II) [drm] DRM interface version 1.4
[ 9.197] (II) [drm] DRM open master succeeded.
[ 9.197] (--) NOUVEAU(0): Chipset: "NVIDIA NV34"
[ 9.197] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 9.197] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 9.197] (==) NOUVEAU(0): RGB weight 888
[ 9.197] (==) NOUVEAU(0): Default visual is TrueColor
[ 9.197] (==) NOUVEAU(0): Using HW cursor
[ 9.197] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 9.197] (==) NOUVEAU(0): Page flipping enabled
[ 9.197] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[ 9.227] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[ 9.280] (II) NOUVEAU(0): Output TV-1 has no monitor section
[ 9.309] (II) NOUVEAU(0): EDID for output VGA-1
[ 9.309] (II) NOUVEAU(0): Manufacturer: SAM Model: 1b Serial#: 1195913527
[ 9.309] (II) NOUVEAU(0): Year: 2003 Week: 16
[ 9.309] (II) NOUVEAU(0): EDID Version: 1.3
[ 9.309] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 9.309] (II) NOUVEAU(0): Sync: Separate Composite SyncOnGreenSerration on. V.Sync Pulse req. if CompSync or SyncOnGreen
[ 9.309] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 34 vert.: 27
[ 9.309] (II) NOUVEAU(0): Gamma: 2.40
[ 9.309] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 9.309] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 9.309] (II) NOUVEAU(0): redX: 0.634 redY: 0.354 greenX: 0.304 greenY: 0.581
[ 9.309] (II) NOUVEAU(0): blueX: 0.143 blueY: 0.102 whiteX: 0.318 whiteY: 0.339
[ 9.309] (II) NOUVEAU(0): Supported established timings:
[ 9.309] (II) NOUVEAU(0): 720x400@70Hz
[ 9.309] (II) NOUVEAU(0): 640x480@60Hz
[ 9.309] (II) NOUVEAU(0): 640x480@67Hz
[ 9.309] (II) NOUVEAU(0): 640x480@72Hz
[ 9.310] (II) NOUVEAU(0): 640x480@75Hz
[ 9.310] (II) NOUVEAU(0): 800x600@56Hz
[ 9.310] (II) NOUVEAU(0): 800x600@60Hz
[ 9.310] (II) NOUVEAU(0): 800x600@72Hz
[ 9.310] (II) NOUVEAU(0): 800x600@75Hz
[ 9.310] (II) NOUVEAU(0): 832x624@75Hz
[ 9.310] (II) NOUVEAU(0): 1024x768@60Hz
[ 9.310] (II) NOUVEAU(0): 1024x768@70Hz
[ 9.310] (II) NOUVEAU(0): 1024x768@75Hz
[ 9.310] (II) NOUVEAU(0): 1280x1024@75Hz
[ 9.310] (II) NOUVEAU(0): 1152x864@75Hz
[ 9.310] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 9.310] (II) NOUVEAU(0): Supported standard timings:
[ 9.310] (II) NOUVEAU(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 9.310] (II) NOUVEAU(0): #1: hsize: 1024 vsize 768 refresh: 60 vid: 16481
[ 9.310] (II) NOUVEAU(0): #2: hsize: 800 vsize 600 refresh: 60 vid: 16453
[ 9.310] (II) NOUVEAU(0): #3: hsize: 640 vsize 480 refresh: 60 vid: 16433
[ 9.310] (II) NOUVEAU(0): Supported detailed timing:
[ 9.310] (II) NOUVEAU(0): clock: 108.0 MHz Image Size: 338 x 270 mm
[ 9.310] (II) NOUVEAU(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 9.310] (II) NOUVEAU(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 9.310] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
[ 9.310] (II) NOUVEAU(0): Monitor name: SyncMaster
[ 9.310] (II) NOUVEAU(0): Serial No: HJGW403719
[ 9.310] (II) NOUVEAU(0): EDID (in hex):
[ 9.310] (II) NOUVEAU(0): 00ffffffffffff004c2d1b0037314847
[ 9.310] (II) NOUVEAU(0): 100d01030f221b8cea6f8ba25a4d9424
[ 9.310] (II) NOUVEAU(0): 1a5156bfef8081806140454031400101
[ 9.310] (II) NOUVEAU(0): 010101010101302a009851002a403070
[ 9.310] (II) NOUVEAU(0): 1300520e1100001e000000fd00384c1e
[ 9.310] (II) NOUVEAU(0): 510e000a202020202020000000fc0053
[ 9.310] (II) NOUVEAU(0): 796e634d61737465720a2020000000ff
[ 9.310] (II) NOUVEAU(0): 00484a47573430333731390a20200057
[ 9.310] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
[ 9.310] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[ 9.310] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[ 9.310] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 9.310] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 9.310] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 9.310] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 9.310] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 9.310] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 9.310] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 9.310] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 9.311] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[ 9.311] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 9.311] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "1280x768"x74.9 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "1024x576"x60.0 46.97 1024 1064 1168 1312 576 577 580 597 -hsync +vsync (35.8 kHz)
[ 9.311] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 9.363] (II) NOUVEAU(0): EDID for output TV-1
[ 9.363] (II) NOUVEAU(0): Output VGA-1 connected
[ 9.363] (II) NOUVEAU(0): Output TV-1 disconnected
[ 9.363] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 9.363] (II) NOUVEAU(0): Output VGA-1 using initial mode 1280x1024
[ 9.363] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 9.363] (--) NOUVEAU(0): Virtual size is 1280x1024 (pitch 0)
[ 9.363] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[ 9.363] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 9.363] (**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[ 9.363] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 9.363] (**) NOUVEAU(0): Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
[ 9.363] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 9.363] (**) NOUVEAU(0): Driver mode "1280x800": 106.5 MHz (scaled from 0.0 MHz), 62.8 kHz, 74.9 Hz
[ 9.363] (II) NOUVEAU(0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e)
[ 9.363] (**) NOUVEAU(0): Driver mode "1280x800": 83.5 MHz (scaled from 0.0 MHz), 49.7 kHz, 59.8 Hz
[ 9.363] (II) NOUVEAU(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
[ 9.363] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[ 9.363] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 9.363] (**) NOUVEAU(0): Driver mode "1280x768": 102.2 MHz (scaled from 0.0 MHz), 60.3 kHz, 74.9 Hz
[ 9.363] (II) NOUVEAU(0): Modeline "1280x768"x74.9 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz e)
[ 9.363] (**) NOUVEAU(0): Driver mode "1280x768": 79.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 59.9 Hz
[ 9.363] (II) NOUVEAU(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
[ 9.363] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[ 9.363] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 9.363] (**) NOUVEAU(0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[ 9.363] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 9.363] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 9.364] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 9.364] (**) NOUVEAU(0): Mode "1024x576": 47.0 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
[ 9.364] (II) NOUVEAU(0): Modeline "1024x576"x60.0 46.97 1024 1064 1168 1312 576 577 580 597 -hsync +vsync (35.8 kHz)
[ 9.364] (**) NOUVEAU(0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[ 9.364] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 9.364] (**) NOUVEAU(0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[ 9.364] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 9.364] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[ 9.364] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 9.364] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 9.364] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 9.364] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 9.364] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 9.364] (**) NOUVEAU(0): Driver mode "848x480": 33.8 MHz (scaled from 0.0 MHz), 31.0 kHz, 60.0 Hz
[ 9.364] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 9.364] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[ 9.364] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 9.364] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[ 9.364] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 9.364] (**) NOUVEAU(0): Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[ 9.364] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 9.364] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 9.364] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 9.364] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[ 9.364] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 9.364] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 9.364] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 9.364] (**) NOUVEAU(0): Display dimensions: (340, 270) mm
[ 9.364] (**) NOUVEAU(0): DPI set to (95, 96)
[ 9.364] (II) Loading sub module "fb"
[ 9.364] (II) LoadModule: "fb"
[ 9.364] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 9.375] (II) Module fb: vendor="X.Org Foundation"
[ 9.375] compiled for 1.12.4, module version = 1.0.0
[ 9.375] ABI class: X.Org ANSI C Emulation, version 0.4
[ 9.375] (II) Loading sub module "exa"
[ 9.375] (II) LoadModule: "exa"
[ 9.376] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 9.380] (II) Module exa: vendor="X.Org Foundation"
[ 9.380] compiled for 1.12.4, module version = 2.5.0
[ 9.380] ABI class: X.Org Video Driver, version 12.1
[ 9.380] (II) Loading sub module "shadowfb"
[ 9.380] (II) LoadModule: "shadowfb"
[ 9.380] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 9.382] (II) Module shadowfb: vendor="X.Org Foundation"
[ 9.382] compiled for 1.12.4, module version = 1.0.0
[ 9.382] ABI class: X.Org ANSI C Emulation, version 0.4
[ 9.382] (--) Depth 24 pixmap format is 32 bpp
[ 9.382] (II) NOUVEAU(0): Opened GPU channel 1
[ 9.384] (II) NOUVEAU(0): [DRI2] Setup complete
[ 9.384] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 9.384] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 9.399] (II) EXA(0): Driver allocated offscreen pixmaps
[ 9.399] (II) EXA(0): Driver registered support for the following operations:
[ 9.399] (II) Solid
[ 9.399] (II) Copy
[ 9.399] (II) Composite (RENDER acceleration)
[ 9.399] (II) UploadToScreen
[ 9.399] (II) DownloadFromScreen
[ 9.399] (==) NOUVEAU(0): Backing store disabled
[ 9.399] (==) NOUVEAU(0): Silken mouse enabled
[ 9.399] (II) NOUVEAU(0): [XvMC] Associated with NV30 texture adapter.
[ 9.399] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 9.399] (==) NOUVEAU(0): DPMS enabled
[ 9.399] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 9.399] (--) RandR disabled
[ 9.399] (II) Initializing built-in extension Generic Event Extension
[ 9.399] (II) Initializing built-in extension SHAPE
[ 9.399] (II) Initializing built-in extension MIT-SHM
[ 9.400] (II) Initializing built-in extension XInputExtension
[ 9.400] (II) Initializing built-in extension XTEST
[ 9.400] (II) Initializing built-in extension BIG-REQUESTS
[ 9.400] (II) Initializing built-in extension SYNC
[ 9.400] (II) Initializing built-in extension XKEYBOARD
[ 9.400] (II) Initializing built-in extension XC-MISC
[ 9.400] (II) Initializing built-in extension SECURITY
[ 9.400] (II) Initializing built-in extension XINERAMA
[ 9.400] (II) Initializing built-in extension XFIXES
[ 9.400] (II) Initializing built-in extension RENDER
[ 9.400] (II) Initializing built-in extension RANDR
[ 9.400] (II) Initializing built-in extension COMPOSITE
[ 9.400] (II) Initializing built-in extension DAMAGE
[ 9.800] (II) AIGLX: Loaded and initialized swrast
[ 9.800] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 9.807] (II) NOUVEAU(0): NVEnterVT is called.
[ 9.807] (II) NOUVEAU(0): Setting screen physical size to 338 x 270
[ 9.807] resize called 1280 1024
[ 10.066] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 10.066] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 10.066] (II) LoadModule: "evdev"
[ 10.066] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 10.075] (II) Module evdev: vendor="X.Org Foundation"
[ 10.075] compiled for 1.12.3.901, module version = 2.7.3
[ 10.075] Module class: X.Org XInput Driver
[ 10.075] ABI class: X.Org XInput driver, version 16.0
[ 10.075] (II) Using input driver 'evdev' for 'Power Button'
[ 10.076] (**) Power Button: always reports core events
[ 10.076] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 10.076] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 10.076] (--) evdev: Power Button: Found keys
[ 10.076] (II) evdev: Power Button: Configuring as keyboard
[ 10.076] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 10.076] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 10.076] (**) Option "xkb_rules" "evdev"
[ 10.076] (**) Option "xkb_model" "evdev"
[ 10.076] (**) Option "xkb_layout" "us"
[ 10.117] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 10.117] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 10.117] (II) Using input driver 'evdev' for 'Power Button'
[ 10.117] (**) Power Button: always reports core events
[ 10.117] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 10.118] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 10.118] (--) evdev: Power Button: Found keys
[ 10.118] (II) evdev: Power Button: Configuring as keyboard
[ 10.118] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 10.118] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 10.118] (**) Option "xkb_rules" "evdev"
[ 10.118] (**) Option "xkb_model" "evdev"
[ 10.118] (**) Option "xkb_layout" "us"
[ 10.118] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 10.118] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 10.118] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 10.119] (**) AT Translated Set 2 keyboard: always reports core events
[ 10.119] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 10.119] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 10.119] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 10.119] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 10.119] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 10.119] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 8)
[ 10.119] (**) Option "xkb_rules" "evdev"
[ 10.119] (**) Option "xkb_model" "evdev"
[ 10.119] (**) Option "xkb_layout" "us"
[ 10.120] (II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/event4)
[ 10.120] (**) ImPS/2 Logitech Wheel Mouse: Applying InputClass "evdev pointer catchall"
[ 10.120] (II) Using input driver 'evdev' for 'ImPS/2 Logitech Wheel Mouse'
[ 10.120] (**) ImPS/2 Logitech Wheel Mouse: always reports core events
[ 10.120] (**) evdev: ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event4"
[ 10.120] (--) evdev: ImPS/2 Logitech Wheel Mouse: Vendor 0x2 Product 0x5
[ 10.120] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
[ 10.120] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
[ 10.120] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found relative axes
[ 10.120] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
[ 10.120] (II) evdev: ImPS/2 Logitech Wheel Mouse: Configuring as mouse
[ 10.120] (II) evdev: ImPS/2 Logitech Wheel Mouse: Adding scrollwheel support
[ 10.120] (**) evdev: ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
[ 10.120] (**) evdev: ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 10.120] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input4/event4"
[ 10.120] (II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE, id 9)
[ 10.120] (II) evdev: ImPS/2 Logitech Wheel Mouse: initialized for relative axes.
[ 10.120] (**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
[ 10.120] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration profile 0
[ 10.120] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration factor: 2.000
[ 10.120] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration threshold: 4
[ 10.121] (II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/mouse0)
[ 10.121] (II) No input driver specified, ignoring this device.
[ 10.121] (II) This device may have been added with another device file.
[ 10.121] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 10.121] (II) No input driver specified, ignoring this device.
[ 10.121] (II) This device may have been added with another device file.
[ 10.174] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
[ 10.174] (II) NOUVEAU(0): Using hsync ranges from config file
[ 10.174] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 10.174] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 10.174] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 10.174] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 10.174] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 10.174] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 10.174] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 10.174] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 10.174] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 10.174] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 10.174] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 10.174] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 10.174] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 10.174] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 10.174] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 10.174] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 10.174] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 10.174] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 14.960] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
[ 14.960] (II) NOUVEAU(0): Using hsync ranges from config file
[ 14.960] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 14.960] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 14.960] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 14.961] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 14.961] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 14.961] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 14.961] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 14.961] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 14.961] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 14.961] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 14.961] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 14.961] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 14.961] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 14.961] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 14.961] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 14.961] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 14.961] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 14.961] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 84.256] (II) NOUVEAU(0): NVLeaveVT is called.
[ 111.559] (II) NOUVEAU(0): NVEnterVT is called.
[ 111.601] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
[ 111.601] (II) NOUVEAU(0): Using hsync ranges from config file
[ 111.601] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 111.601] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 111.601] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 111.601] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 111.601] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 111.601] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 111.601] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 111.601] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 111.601] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 111.602] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 111.602] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 111.602] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 111.602] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 111.602] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 111.602] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 111.602] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 111.602] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 111.602] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 119.891] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
[ 119.891] (II) NOUVEAU(0): Using hsync ranges from config file
[ 119.891] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 119.891] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 119.891] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 119.891] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 119.891] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 119.891] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 119.891] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 119.891] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 119.891] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 119.891] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 119.891] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 119.891] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 119.891] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 119.891] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 119.891] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 119.891] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 119.892] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 119.892] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 121.162] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
[ 121.162] (II) NOUVEAU(0): Using hsync ranges from config file
[ 121.162] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 121.162] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 121.162] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 121.162] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 121.162] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 121.162] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 121.162] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 121.162] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 121.162] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 121.162] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 121.162] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 121.162] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 121.162] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 121.162] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 121.162] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 121.162] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 121.163] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 121.163] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 122.743] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
[ 122.743] (II) NOUVEAU(0): Using hsync ranges from config file
[ 122.743] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 122.743] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 122.743] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 122.743] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 122.743] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 122.743] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 122.743] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 122.743] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 122.743] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 122.743] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 122.743] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 122.743] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 122.743] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 122.743] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 122.743] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 122.743] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 122.744] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 122.744] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 138.896] (II) NOUVEAU(0): NVLeaveVT is called.
[ 167.669] (II) NOUVEAU(0): NVEnterVT is called.
[ 167.720] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
[ 167.720] (II) NOUVEAU(0): Using hsync ranges from config file
[ 167.720] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 167.720] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 167.720] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 167.720] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 167.720] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 167.720] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 167.720] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 167.720] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 167.720] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 167.720] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 167.720] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 167.720] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 167.720] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 167.720] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 167.720] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 167.720] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 167.720] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 167.720] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 186.390] (II) NOUVEAU(0): NVLeaveVT is called.
- .xsession-errors in gnome session :
GNOME_KEYRING_CONTROL=/home/olivier/.cache/keyring-D3uSoF
GNOME_KEYRING_CONTROL=/home/olivier/.cache/keyring-D3uSoF
GPG_AGENT_INFO=/home/olivier/.cache/keyring-D3uSoF/gpg:0:1
GNOME_KEYRING_CONTROL=/home/olivier/.cache/keyring-D3uSoF
GPG_AGENT_INFO=/home/olivier/.cache/keyring-D3uSoF/gpg:0:1
SSH_AUTH_SOCK=/home/olivier/.cache/keyring-D3uSoF/ssh
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 55
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 56
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 59
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 58
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 55
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 56
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 59
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 58
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
Failed to play sound: File or data not found
** Message: applet now removed from the notification area
** Message: applet now embedded in the notification area
Avertissement du gestionnaire de fenêtres : CurrentTime used to choose focus window; focus window may not be correct.
Avertissement du gestionnaire de fenêtres : Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
(gnome-shell:700): folks-WARNING **: Failed to find primary PersonaStore with type ID 'eds' and ID 'system'.
Individuals will not be linked properly and creating new links between Personas will not work.
The configured primary PersonaStore's backend may not be installed. If you are unsure, check with your distribution.
(gnome-shell:700): GLib-GIO-WARNING **: Dropping signal ActiveSessionChanged of type (s) since the type from the expected interface is (o)
(gnome-settings-daemon:657): color-plugin-WARNING **: Done switch to new account, reload devices
(gnome-shell:700): GLib-GIO-WARNING **: Dropping signal ActiveSessionChanged of type (s) since the type from the expected interface is (o)
(gnome-shell:700): GLib-GIO-WARNING **: Dropping signal ActiveSessionChanged of type (s) since the type from the expected interface is (o)
Last edited by Jejel59 (2012-09-06 11:34:53)I'm no expert on reading the xsession errors, but I had all sorts of problems running gnome3 with my machine of the same vintage. Cinamon is based on gnome3. I switched to Mate which is a re-packaging of the old gnome2 along with Compiz for the window manager and all works well.
I strongly suspect that they are using the newer OpenGL 4 API. The Nvidia FX5200 is stuck at OpenGL 2.1. -
[solved] damn fast cursor (and sometimes small fonts) in gdm and GNOME
Hey there!
Since yesterday's pacman -Syu (unfortunately I can't remember the packages beeing updated ), my cursor moves damn fast, i.e. the cursor is very (very! ) sensitive to mouse movements! I have a Logitech MX Laser, but it's the same with an old mechanical mouse.
My second problem (that came up a long time ago) is that gdm sometimes has a smaller fontsize (i.e. text entered in the login textfield is smaller than usual); and I have to restart X to reset the fontsize, otherwise it will be the same in GNOME. That often occurs after an update on X.
Any hints for me (mainly for the first one, I can live with the second...)? Thank you!
Last edited by kwurzel (2008-03-26 12:44:35)Try appending this resolution line to the mouse section of your /etc/X11/xorg.conf
I think setting a lower value will reduce the sensitivity.
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto" # Auto detect
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
Option "Resolution" "128"
Last edited by dyscoria (2008-03-26 11:48:39) -
Dennis Ritchie, creator of C and more, has died
http://www.h-online.com/open/news/item/ … 60480.html
ArchArael wrote:Farewell and see you soon.
Errrr ...
A quote from the movie 'Gladiator':
[to his dead friend]
Juba: I will see you again... but not yet... not yet...
Last edited by karol (2011-10-13 19:37:21) -
I have an iPhone 5 which has died completely and won't charge.
I have had the phone since January last year. The sleep/power button doesn't work (the worker in the store reckoned I wouldn't be eligable for the replacement service because there a scratch on one corner of the phone). The phone is completely unresponsive even when plugged into the charger. This is the second time this has happened, the first time I took it into the apple store and the guy managed to fix it but a week and a half later and it has died again. Short of taking a hammer to the phone, what other options do I have?
Bring it back to Apple
-
trying to use i3 with gdm and gnome-session, following the same steps as using xmonad and awesome. gnome-session crashes about 30 seconds after it starts. i3 is running properly before that.
/usr/share/xsessions/i3-gnome.desktop:
[Desktop Entry]
Name=i3 GNOME
Comment=Dynamic window manager
TryExec=/usr/bin/gnome-session
Exec=gnome-session --session=i3
Type=XSession
/usr/share/gnome-session/sessions/i3.session
[GNOME Session]
Name=i3 session
RequiredComponents=gnome-settings-daemon;
RequiredProviders=windowmanager;notifications;
DefaultProvider-windowmanager=i3
DefaultProvider-notifications=notification-daemon
~/.xsession-errors (after the i3 init stuff):
gnome-session[9169]: WARNING: Application 'i3.desktop' failed to register before timeout
[src/xcb.c:698] ERROR: X11 connection was closed unexpectedly - maybe your X server terminated / crashed?
(notification-daemon:9225): Gdk-WARNING **: notification-daemon: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0"
after 16 requests (16 known processed) with 0 events remaining.
XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0"
after 32 requests (32 known processed) with 0 events remaining.
i feel like gnome-session shouldn't crash if it's only throwing a warning. there's not much info here. as far as i know, i3 logs to ~/.xsession-errors anyway.I switched nvidia card for ati and its solved my problem so far.
-
My phone has just simply died. I have restored it three times and it has died in the same way repeatedly. Help!!!!
Connect it to your computer and see if it is recognized. If it is Restore it from your backup.
-
Phone has died after 7.1.2 update
I have just updated my phone with the latest software and it has died. I can't turn it on or anything. I have tried resetting it and it is just blank
Connect it to your computer and see if it is recognized. If it is Restore it from your backup.
-
Hal start failure,relogin gdm,and cant see gnome desktop
Hal start failure,relogin gdm,and cant see gnome desktop
When system start ,I can see gdm. When you enter a user and name password to login the desktop, the screen flash, immediately logout from the desktop,Back to the login interface.
manual start hal ,failure.
Thanks.
Last edited by wevol (2009-12-18 14:12:35)I had a similar issue with HAL on my netbook (Lenovo S10e) running arch i686 kernelversion 2.6.32. When typing as root
$ /etc/rc.d/hal start
it failed.
I then killed the hald process via
$ killall hald
and now it starts fine.
Don't know what caused the problem, has there been a hal update recently? -
Hello
My computer has died and I've had to by a new one. I have a creative cloud account registered under my email <Removed by Moderator> for both Photoshop CC and Lightroom 5 which I pay for via Direct Debit.
I no longer have the Creative Cloud app but downloaded both programs to my new iMac. Photoshop works fine but Lightroom is still on trial purchase and asks for serial number. My account page on your site has no record of my CC account and shows no serial number for my purchased products. (It only lists a previous purchase of Lightroom-4)
How can get the serial numbers to my purchased products when they don't appear on my account settings on your website. Do I need to close my account a open a new one?Hello Ratandeep
I pay £8.57 for my Creative Cloud purchases of both Photoshop CC and
Lightroom-5 via my Barclays Bank Account to Adobe in Ireland. The last
payment was 13 Aprii 2015. Two weeks ago.
Now I have a new computer. I can sign into my Creative Cloud but it says I
have a 'Creative Cloud free account' as I'm using trial versions. I do not
have a redemption code as I must of lost it when my old computer died. I
can get online so that is not an issue.
When I sign in to my account the Creative Cloud products do not appear
under my purchases so I cannot view serial numbers or change the credit
card I pay with. It seems that your website and my account section do not
know I am making regular monthly payments for CC.
If you check I am actually making the payments as I describe can you please
let me have my serial numbers.
MANY THANKS
Mike
On Saturday, April 25, 2015, Ratandeep Arora <[email protected]> -
Hi all, My Old Laptop that had my Itunes, has died a death and cannot be saved.
How can I save or access all my music and apps now?
Can I set up a new Itunes account?
Also I am getting an upgrade to Iphone 4 ,can I transfer all my music and apps on to it?roaminggnome wrote:
Why would you set up a new account?
Copy everything from your backup copy of your old computer to your new one.
Its wrong to assume that everyone has a backup copy.
are you PC or Mac? -
Hi, Unfortunately my Laptop has died (which had my iTunes on it). I want to ensure my music on my iPhone 5 and my iPad Air are backed up. Also, I want to sort my music in the way I used to with iTunes. How can I do this with just these two devices, i.e. NO Computer? Can the iCloud help? Why can't I download iTunes (i.e. my library as I saw it on the computer) to these devices? Thanks to anyone who can help me here.
You can change the email address of one's appleID...
I'd recommend changing moms email to yours to get a good backup on the Mac
Then switch mom's back to hers
Then change your account to the same email you used.
I've done something similar when I needed to update my Apple account (one ID changing email addresses and phone) -
Does anyone know how to make an appointment with a genius on the net please? Also is there a chat room that can be accessed on the net? My iphone has died and I desperately need to take it in to get fixed/replaced. I can't find anything..............help!!!
Apple Retail Store - Genius Bar
What kind of chat room?
Have you tried basics from the manual? restart, reset, restore
Maybe you are looking for
-
Is there a way to make the Form Wizard group things in the order I want it to?
I am creating a multi-page checklist. Each question has a radio button with the possible answers of yes, no or n/a. When I run the Form Wizard, it detects the boxes I created, in Word using the Developer, but it puts all the yes's in a group, all the
-
Hi, I usually connect my Panasonic AVCHD Camcorder via USB to copy the .MTS files across to my iMac for editing. Since upgrading to Mountain Lion, Finder sees the directories for photos stored on the Camcorder but not the video directories/files. I c
-
How can I load a screen in a splitter control?
Hello! How can I load a screen in a splitter control? g
-
Hi, I'd like to ask if there is a way to have a small Oralce portal test enviroment to test and to debug developed portlets locally using Oracle JDeveloper 10g on each developer machine instead of connecting to a standalone portal server . i cecheked
-
Hi, I am trying to read the pdf file that have chinese characters. I am using iText. But when I read them, it will give me hex string for those characters. I had tried too much variations to retrieve those chinese characters by applying different enc