GDM does not allow resolution while Gnome does

My xorg.conf is set to default resolution 1024x768, and when I get into gnome I have 1152x864 set up and it works fine. If I set my default xorg.conf resolution to 1152x864 like my gnome, GDM isn't displayed and I have to login blindly. This would not be a problem except I want to run openbox in 1152x864 which uses the default xorg.conf resolution.
I'm using the proprietary ati drivers with my radeon x800. Any ideas?
Last edited by Statix (2008-03-12 00:35:42)

Ok, I investigated problem a bit.
I have GDM configured with autologin, what was working for me for a while and now it stopped. Here's the output of stystemctl status gdm.service:
gdm.service - GNOME Display Manager
Loaded: loaded (/usr/lib/systemd/system/gdm.service; enabled)
Active: active (running) since Wed, 2012-11-07 23:44:17 CET; 4min 9s ago
Main PID: 393 (gdm-binary)
CGroup: name=systemd:/system/gdm.service
├ 393 /usr/sbin/gdm-binary
├ 404 /usr/lib/gdm/gdm-simple-slave --display-id /org/gnome/DisplayManager/Displays/_0
└ 407 /usr/bin/Xorg :0 -background none -verbose -auth /var/run/gdm/auth-for-gdm-yT4wmE/database -seat seat0 -nolisten tcp vt1
Nov 07 23:44:17 localhost systemd[1]: Starting GNOME Display Manager...
Nov 07 23:44:17 localhost systemd[1]: Started GNOME Display Manager.
Nov 07 23:44:19 localhost gdm-simple-slave[404]: WARNING: Failed to give slave programs access to the display. Trying to proceed.
Nov 07 23:44:19 localhost gdm-autologin][417]: gkr-pam: no password is available for user
I tried removed autologin from /etc/gdm/custom.conf and rebooted system. GDM showed up, but it was not allowing me to login always failing with message, that authentication failed.
Any idea how to deal with this issue?

Similar Messages

  • HTTP/1.1 405 Method Not Allowed error while deploying application in EPMA

    Hi All,
    I have recently installed EPM 11.1.2.1 on a windows 2008 server with SQL Server 2008 database. I created a new HFM application and tried to deploy it, but the deployment gets aborted with the error "HTTP/1.1 405 Method Not Allowed" seen in the deployment log.
    Any clue as to what might be the issue? Thanks in advance.

    "405 Method Not Allowed" is most likely an IIS configuration issue. Please try reboot and try to redeploy again.
    You need to check and ensure that both Roles and IIS components are installed correctly and that the HFM is functioning OK via IIS when browsing through it.
    Also, by default IIS does not install ASP server scripting roles. To correct this by adding the ASP role in IIS
    "If you are using Windows 2008, you must install ASP Role Services before installing EPM System products that require IIS. If you are using Windows 2008, you must install .NET 3.5 before installation of Data Relationship Management.
    If IIS is chosen as the Web server during configuration, you must allow all unknown ISAPI extensions through the Internet Information Services Manager."
    Please refer "Oracle Hyperion Enterprise Performance Management System Installation Start Here" guide page no: 64
    http://download.oracle.com/docs/cd/E17236_01/epm.1112/epm_install_start_here_11121.pdfhttp://download.oracle.com/docs/cd/E17236_01/epm.1112/epm_install_start_here_11121.pdf

  • "Method Not allowed" Error while submitting request thro proxy server

    I have an application that uses JSSE to talk to a http/https
    server, everything worked until I tried using https and a
    proxy. Http with or without a proxy worked, https without a
    proxy worked, but I can't get https with a proxy to work. The
    only thing my application does different is to setup the proxy
    stuff with the following function
    if (strTunneling.equalsIgnoreCase("ON")) {
    /** Setting the proxy host-name and proxy port in the system */
    String strProxyHost = ((String) objRouterProp.getProperty("PROXYHOST")).trim();
    String strProxyPort = ((String) objRouterProp.getProperty("PROXYPORT")).trim();
    System.setProperty("https.proxyHost",strProxyHost);
    System.setProperty("https.proxyPort",strProxyPort);
    The Exception i am getting is as follows
    java.io.IOException: Unable to tunnel through proxy. Proxy returns "HTTP/1.0 405 Method not allowed"
    Any Help is highly appreciated
    Thanks
    Thirumaran

    It means your proxy-server doesn't allow HTTPS tunneling. Have you looked at the "Allow" header in the response? If the proxy is coded correctly, it's supposed to contain ways you can reach the requested resource in ways the proxy will allow.
    Some proxies don't allow HTTPS tunneling because they want to be able to log the traffic contents. Perhaps this is one of them.
    Grant

  • Coding not allowed error in BDC

    Hi,
    Recorded transaction MB1C with "Not a Batch Input Session' option. In the code should I mention this anywhere. Because, I get coding not allowed error while running BDC program.
    Please go thru the code below:
    perform bdc_dynpro      using 'SAPMM07M' '0400'.
          perform bdc_field       using 'BDC_CURSOR  'MKPF-BKTXT'.
          perform bdc_field       using 'BDC_OKCODE' '/00'.
          perform bdc_field       using 'MKPF-BLDAT'  W_HDR-BLDAT.
          perform bdc_field       using 'MKPF-BUDAT'  W_HDR-BUDAT.
          perform bdc_field       using 'MKPF-BKTXT'   W_HDR-BKTXT.
          perform bdc_field       using 'RM07M-BWARTWA'   W_HDR-BWARTWA.
          perform bdc_field       using 'RM07M-WERKS'  W_HDR-WERKS.
          perform bdc_field       using 'RM07M-LGORT'   W_HDR-LGORT.
          perform bdc_field       using 'RM07M-WVERS2'   W_HDR-WVERS2.
          LOOP AT T_MAT INTO W_MAT.
              i = i + 1.
              IF i > 99.
                MOVE i to k.
                CONCATENATE 'MSEG-MATNR(' k ')' INTO l_field1.
                CONCATENATE 'MSEG-ERFMG(' k ')' INTO l_field2.
              ELSE.
                MOVE i to j.
                CONCATENATE 'MSEG-MATNR(' j ')' INTO l_field1.
                CONCATENATE 'MSEG-ERFMG(' j ')' INTO l_field2.
              ENDIF.
              perform bdc_dynpro      using 'SAPMM07M' '0421'.
              perform bdc_field       using 'BDC_CURSOR'
                                            l_field2.
              perform bdc_field       using 'BDC_OKCODE'
                                            '/00'.
              perform bdc_field       using l_field1
                                            W_MAT-MATNR.
              perform bdc_field       using l_field2
                                            W_MAT-ERFMG.
              l_field1 = ''.
              l_field2 = ''.
          ENDLOOP.
          perform bdc_dynpro      using 'SAPMM07M' '0421'.
          perform bdc_field       using 'BDC_CURSOR'
                                        'MSEG-ERFMG(01)'.
          perform bdc_field       using 'BDC_OKCODE'
                                        '=BU'.
          perform bdc_transaction using 'MB1C'.
      ENDLOOP.
    Regards,
    Sriram
    Edited by: Sriram_14880 on Jul 28, 2009 2:53 PM

    Hi  there is no problem weather u r using option  'Not a Batch Input Session'  or not , generally it is used in call transaction
    see the documentation of call transaction options (ctu_params).
    structure of ctu_params is
    DISMODE
    UPMODE
    CATTMODE
    DEFSIZE
    RACOMMIT
    NOBINPT      ( Selection for the symbol field sy-binpt. Values: " " (sy-binpt contains in the called transaction "X"),
                         "X" (sy-binpt          contains in the called transaction " ").
    NOBIEND     Selection for the system field sy-binpt. Values: " " (sy-binpt contains "X" after the end of the batch input
                        data in   the  called transsaction ) "X" (sy-binpt contains " " after the end of the batch input data in the called   transaction).
    In the  new recordinng screen u will have four options ctu_params.
                              default size
                             cntinue after commit
                             Not a Batch Input Session
                            simulate back......
    The above four options u can set manually in call transaction from ctu_params
    not a batch input session option  refers to ctu_params-NOBINPT.
    read the documentation of call transaction statement.
    Ram

  • GDM does not allow me to login

    Hello,
    I just updated my system after about one week. When computer starts I see initial boot output (information about decompressing kernel image and systemd-fsck output), then normally GDM was starting. Now I only see the same initial output and after some time only mouse cursor shows up (with busy icon). That's all, GDM is not displayed at all, but I can move mouse cursor on screen. The initial booting output stays on screen like a wallpaper.
    I'm able to switch to other terminal and use computer from cmd. Does anyone had similar issue? Maybe I should provide some logs?
    I have graphic card from nvidia and use nouveu driver.
    Last edited by goofy (2012-11-07 22:47:47)

    Ok, I investigated problem a bit.
    I have GDM configured with autologin, what was working for me for a while and now it stopped. Here's the output of stystemctl status gdm.service:
    gdm.service - GNOME Display Manager
    Loaded: loaded (/usr/lib/systemd/system/gdm.service; enabled)
    Active: active (running) since Wed, 2012-11-07 23:44:17 CET; 4min 9s ago
    Main PID: 393 (gdm-binary)
    CGroup: name=systemd:/system/gdm.service
    ├ 393 /usr/sbin/gdm-binary
    ├ 404 /usr/lib/gdm/gdm-simple-slave --display-id /org/gnome/DisplayManager/Displays/_0
    └ 407 /usr/bin/Xorg :0 -background none -verbose -auth /var/run/gdm/auth-for-gdm-yT4wmE/database -seat seat0 -nolisten tcp vt1
    Nov 07 23:44:17 localhost systemd[1]: Starting GNOME Display Manager...
    Nov 07 23:44:17 localhost systemd[1]: Started GNOME Display Manager.
    Nov 07 23:44:19 localhost gdm-simple-slave[404]: WARNING: Failed to give slave programs access to the display. Trying to proceed.
    Nov 07 23:44:19 localhost gdm-autologin][417]: gkr-pam: no password is available for user
    I tried removed autologin from /etc/gdm/custom.conf and rebooted system. GDM showed up, but it was not allowing me to login always failing with message, that authentication failed.
    Any idea how to deal with this issue?

  • [Solved]urxvt does not search the font for emojis while gnome-terminal

    Hi, I'm using urxvt and am having some problems setting up fonts. These are my URxvt parameters specifying the fonts
    URxvt*font: xft:Inconsolata-dz for Powerline:style=Semibold:pixelsize=14:antialias=true:hinting=slight, \
    xft:PowerlineSymbols:pixelsize=14:antialias=true:hinting=slight, \
    xft:Symbola:pixelsize=14:antialias=true:hinting=slight
    Now, the emojis from Symbola does not appear and it only appears as a box
    The same thing when opened in Gnome-terminal properly displays the emojis
    Also, I have tried starting urxvt with the following options
    urxvt -fn "xft:Symbola"
    and it works but as you see Symbola is not a font for your terminal.
    What am I doing wrong here? I've check my previous lines and it is right. Do you guys have any ideas? Much appreciated. I have also tried with other posts stating that Urxvt cannot display symbols properly and have tried them all. If I've missed any please let me know. The strange thing is that it works for Gnome-terminal and Urxvt with only Symbola fonts
    Last edited by decryptedepsilon (2014-07-12 02:40:24)

    bch24 wrote:
    Make sure the System Locale is set to utf-8 locale.
    This sometimes is the issue.
    Many thanks for your reply, I've checked the system locale is proper. I think I have found the solution.
    I think the official rxvt-unicode faq and documentation here states that rxvt-unicode drops pixels while showing some fonts because different fonts use different height and width. In this particular case, Symbola font is too wide and the default letterSpace does not allow it to display correct. If -letsp parameter is set to 4, it is displaying but with about a half pixel missing
    The specific parameters for .Xresources
    URxvt*font: xft:Inconsolata-dz for Powerline,xft:Symbola
    URxvt*letterSpace: 4
    And this gives this which technically solves the issue
    The documentation clearly states the following
    All of this requires that fonts do not lie about character sizes, however: Xft fonts often draw glyphs larger than their acclaimed bounding box, and rxvt-unicode has no way of detecting this (the correct way is to ask for the character bounding box, which unfortunately is wrong in these cases).
    I guess the first thing one should do is to check the documentation thoroughly of the official project page rather than searching countless forums where people have discussed stuff based on trial and error. I guess that's a classic rookie mistake and I feel very good that I'm moving past the rookie phase

  • GDM does not appear back after logging out from Gnome.

    Hello,
    I am tryingout Archlinux for the first time. I am able to goto run level 5 and after booting I get the GDM login screen. I can log in to Gnome. But when I log out from Gnome, GDM does not appear, but I get a black screen. Then, the only way to come out is to press the reset button.
    What may be the problem?
    Thanks for your help.
    Anand

    it may depend on how ur running gdm, (possibly with -*no-daemon option) .. in which case it'd prolly werk if u removed it...
    although i'd recommend using rc.conf instead as it's a lot cleaner...
    to use /etc/rc.conf
    add gdm to the DAEMONS;
    mine = "DAEMONS=(gdm @syslog-ng @network @alsa @httpd)"
    that starts gdm(in daemon mode), then starts syslog-ng,net*,alsa and apache in the background .. save me about 6 seconds when i background em.
    then you need to change the default runlevel in /etc/inittab to 3 (not 5)

  • An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,

    An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,
    error: 40 - Could not open a connection to SQL Server)

    An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named
    Pipes Provider, error: 40 - Could not open a connection to SQL Server)
    Hello,
    Make sure your SQL Server service is started.
    Make sure TCP\IP and names pipes protocol is enabled
    Make sure you have made an exception in firewall for SQL Server connection
    Make sure SQL Server browser service is enabled
    Make sure you connect with correct name hostname\instance name for named instance,MSSQLSERVER for default instance and Hotname\SQLEXPRESS for express edition.
    Please make sure you use port no when connecting to SQL server listeing on different port (hostname\instance ,portno)
    http://blogs.msdn.com/sql_protocols/archive/2006/09/30/SQL-Server-2005-Remote-Connectivity-Issue-TroubleShooting.aspx
    Hope this helps
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • Does not allow to set time characteristics while performing Partition

    I had loaded the monthly inventory cube without setting any partition.
    Now, when I tried to partition the cube thru RSDCUBE >> Change >> DB performance >> Partition, the time characteristic is greyed off and does not allow to set.
    Is it becuase the cube had been loaded? Can I perform the partition now that I had compressed the request in the cube?

    Yes you are correct....You want to modify an InfoCube into which data has already been loaded. You use remodeling to change the structure of the object without losing data.
    You use partitioning to split the total dataset for an InfoProvider into several, smaller, physically independent and redundancy-free units. This separation improves system performance when you analyze data delete data from the InfoProvider.
    You can only partition a dataset using one of the two partitioning criteria u2018calendar monthu2019 (0CALMONTH) or u2018fiscal year/period (0FISCPER). At least one of the two InfoObjects must be contained in the InfoProvider.
    But you are trying to partition the cube which already has data so...You choose Repartitioning...
    Repartitioning can be useful if you have already loaded data to your InfoCube, and:
    ●      You did not partition the InfoCube when you created it.
    ●      You loaded more data into your InfoCube than you had planned when you partitioned it.
    ●      You did not choose a long enough period of time for partitioning.
    ●      Some partitions contain no data or little data due to data archiving over a period of time.
    Let me know if you need help with the steps to perform repartitioning

  • When banking on-line Mozilla will not allow me to see the details of a transaction while Internet Explorer will allow it. Mozilla was doing it, but now won't.

    I do my on-line banking with Bank of America generally using Mozilla Firefox. Recently I noticed when I clicked on a bank transaction to see the "details" or to print only that specific transaction, it will not allow me to see the details.
    Previously, whenever I clicked on a transaction, to see the image of a check I wrote for example, it always brought up the image of the check. Now, it will not do it.
    If I use Internet Explorer, I can click on a specific bank transaction and see the details, exactly how I used to be able to do it with Mozilla Firefox.
    Therefore, the problem is with Mozilla and not the Bank of America web site, right?

    Problem solved: AdBlock Plus 2.4 needs to be disabled on the BofA site.

  • Having a problem with Firefox using Hotmail email. Inbox - as checking messages it freezes up or a 1 item window follows cursor and does not allow you to enter

    I am having a problem accessing Hotmail email messages via Fireflox server. When I am in the Inbox, reviewing messages, it either freezes up or a "1 item" small icon window follows cursor and does not allow me to enter messages or do anything. Have to log off and start over. Suggestions>?

    Can you detect any pattern to it, whether related to messages with attachments, or particular advertising on the page, etc.?
    When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
    1. Clear Firefox's Cache
    orange Firefox button ''or'' Tools menu > Options > Advanced
    On the Network mini-tab > Offline Storage : "Clear Now"
    2. If needed, delete the site's cookies here
    While viewing a page on the site, right-click and choose View Page Info > Security > "View Cookies"
    (Usually the dialog will refer to live.com rather than hotmail.com, that's normal.)
    Then try reloading the page and logging in again. Does that help?

  • Dreamweaver does not allow me to edit the editable region

    Oh my, I'm so desperate in this, I have a .dwt and have set up the editable region as well. When I want to make a new html file from the said template dreamweaver does not allow me to edit it. I mean, all the code is completely grayed out as if the template itself is locked by default.
    What I want to do is to create several new pages such as new albums, charts, genres, contacts (which all based on the home template) The home template itself has slider in its body. For the new html files I'm about to create (which I'm so desperate why I can't do so) I want the header and footer to remain the same.
    Here is an image of my index.dwt (my homepage) anything inside the red frame is what I want to edit for new albums, charts, genres, contacts, login page, etc. The top part is the header and the bottom one is the footer (Excuse the right image, I'm working on dual screen)
    Any help will be appreciated!
    Sorry for my english

    Hello SeptianNugraha,
    here some hints concerning while handling templates (I quote):
    The main principle of DW Templates is:
    Non-editable regions = propagate to all child pages. The content of non-edtable regions is identical on all child pages. When you edit a non-editable region, DW propagates all changes to all child pages.
    Editable regions = do not propagate because they're unique to every child page. The whole idea of editable regions is that they contain page specific content which does not appear on any other child page.
    And:
    PART 1
    1. Create a prototype page with all the sitewide elements (common header, footer, sidebar, etc..) that you will need for your entire project. This requires some careful pre-planning even for small web sites.
    2. Validate your code & test this prototype page in all major browsers. 3. When you're completely satisfied with your layout, SaveAs Template. DW will save this as a .dwt file in a site folder called Templates.
    4. DW will ask you to add Editable Regions for stuff that will change from page to page. Do this and SAVE.
    5. Close your Template.dwt file.
    PART 2
    1. File > New Page > from Template.  Select the template you wish to use.  Hit OK.
    2. This is a child page.  You can only edit content within editable regions.  Everything else is locked.
    3. SaveAs index.html (your home page) to the root in your local site folder.
    PART 3
    Repeat PART 2 for each additional page required.
    PART 4
    1. Open your main TEMPLATE file and add a navigation menu with links to your site pages.2. SAVE.3. DW will ask if you want to populate changes to child pages.  Hit yes.
    4. Publish all site pages to your server.
    PART 5
    If you should ever need to edit your TEMPLATE .dwt file, Repeat PART 4.
    Good luck!
    Hans-Günter

  • What's wrong with my device?  It does not allow me to make calls with Skype or Viber...  Can someone help?

    What's wrong with my device?  It does not allow me to make calls with Skype or Viber...  Can someone help?

    My device is a Blackberry Z30.  Skype and Viber just to work fine.  I had to travel abroad and turn off data services while traveling outside of the US but the applications worked just fine with Wi-Fi.  Suddenly they stopped working to make calls.  I can still send text messages, but when I try to do a voice or video call (in the case of skype), it only says "failed call" and when I try to call using Viber I get an error message that says the I can not use the application until I complete my GMS call which is ridiculous because I'm not using the phone other than trying to place my call through Viber. The interesting thing is that when I go the permission page in my security settings everything indicates that its on but is gray out and I do not have access to change any setting.  The same in both applications.  The rest of the applications are accessible to change settings.   I already uninstalled skype and reinstalled it and still the same problem.  I'm ready to back up everything and wipe out the device to original settings. 

  • MaxDB: Table with many LONG fields does not allow an INSERT: ...?

    Hi,
    I have a table with many LONG fields (28). So far, everythings works fine.
    However, if I add another LONG field I cannot insert a dataset anymore
    (29 LONG fields).
    Does there exist a MaxDB parameter or anything else I can change to make inserts possible again?
    Thanks in advance
    Michael
    appendix:
    - Create and Insert command and error message
    - MaxDB version and its parameters
    Create and Insert command and error message
    CREATE TABLE "DBA"."AZ_Z_TEST02"
         "ZTB_ID"               Integer    NOT NULL,
         "ZTB_NAMEOFREPORT"           Char (400) ASCII DEFAULT '',
         "ZTB_LONG_COMMENT"                LONG ASCII DEFAULT '',
         "ZTB_LONG_TEXTBLOCK_00"         LONG ASCII DEFAULT '',
         "ZTB_LONG_TEXTBLOCK_01"         LONG ASCII DEFAULT '',
         "ZTB_LONG_TEXTBLOCK_02"         LONG ASCII DEFAULT '',
         "ZTB_LONG_TEXTBLOCK_03"         LONG ASCII DEFAULT '',
         "ZTB_LONG_TEXTBLOCK_04"         LONG ASCII DEFAULT '',
         "ZTB_LONG_TEXTBLOCK_05"         LONG ASCII DEFAULT '',
         "ZTB_LONG_TEXTBLOCK_06"         LONG ASCII DEFAULT '',
         "ZTB_LONG_TEXTBLOCK_07"         LONG ASCII DEFAULT '',
         "ZTB_LONG_TEXTBLOCK_08"         LONG ASCII DEFAULT '',
         "ZTB_LONG_TEXTBLOCK_09"         LONG ASCII DEFAULT '',
         "ZTB_LONG_TEXTBLOCK_10"         LONG ASCII DEFAULT '',
         "ZTB_LONG_TEXTBLOCK_11"         LONG ASCII DEFAULT '',
         "ZTB_LONG_TEXTBLOCK_12"         LONG ASCII DEFAULT '',
         "ZTB_LONG_TEXTBLOCK_13"         LONG ASCII DEFAULT '',
         "ZTB_LONG_TEXTBLOCK_14"         LONG ASCII DEFAULT '',
         "ZTB_LONG_TEXTBLOCK_15"         LONG ASCII DEFAULT '',
         "ZTB_LONG_TEXTBLOCK_16"         LONG ASCII DEFAULT '',
         "ZTB_LONG_TEXTBLOCK_17"         LONG ASCII DEFAULT '',
         "ZTB_LONG_TEXTBLOCK_18"         LONG ASCII DEFAULT '',
         "ZTB_LONG_TEXTBLOCK_19"         LONG ASCII DEFAULT '',
         "ZTB_LONG_TEXTBLOCK_20"         LONG ASCII DEFAULT '',
         "ZTB_LONG_TEXTBLOCK_21"         LONG ASCII DEFAULT '',
         "ZTB_LONG_TEXTBLOCK_22"         LONG ASCII DEFAULT '',
         "ZTB_LONG_TEXTBLOCK_23"         LONG ASCII DEFAULT '',
         "ZTB_LONG_TEXTBLOCK_24"         LONG ASCII DEFAULT '',
         "ZTB_LONG_TEXTBLOCK_25"         LONG ASCII DEFAULT '',
         "ZTB_LONG_TEXTBLOCK_26"         LONG ASCII DEFAULT '',
         PRIMARY KEY ("ZTB_ID")
    The insert command
    INSERT INTO AZ_Z_TEST02 SET ztb_id = 87
    works fine. If I add the LONG field
    "ZTB_LONG_TEXTBLOCK_27"         LONG ASCII DEFAULT '',
    the following error occurs:
        Auto Commit: On, SQL Mode: Internal, Isolation Level: Committed
        General error;-7032 POS(1) SQL statement not allowed for column of data type LONG
        INSERT INTO AZ_Z_TEST02 SET ztb_id = 88
    MaxDB version and its parameters
    All db params given by
    dbmcli -d myDB -u dbm,dbm param_directgetall > maxdb_params.txt
    are
    KERNELVERSION                         KERNEL    7.5.0    BUILD 026-123-094-430
    INSTANCE_TYPE                         OLTP
    MCOD                                  NO
    RESTART_SHUTDOWN                      MANUAL
    SERVERDBFOR_SAP                     YES
    _UNICODE                              NO
    DEFAULT_CODE                          ASCII
    DATE_TIME_FORMAT                      INTERNAL
    CONTROLUSERID                         DBM
    CONTROLPASSWORD                       
    MAXLOGVOLUMES                         10
    MAXDATAVOLUMES                        11
    LOG_VOLUME_NAME_001                   LOG_001
    LOG_VOLUME_TYPE_001                   F
    LOG_VOLUME_SIZE_001                   64000
    DATA_VOLUME_NAME_0001                 DAT_0001
    DATA_VOLUME_TYPE_0001                 F
    DATA_VOLUME_SIZE_0001                 64000
    DATA_VOLUME_MODE_0001                 NORMAL
    DATA_VOLUME_GROUPS                    1
    LOG_BACKUP_TO_PIPE                    NO
    MAXBACKUPDEVS                         2
    BACKUP_BLOCK_CNT                      8
    LOG_MIRRORED                          NO
    MAXVOLUMES                            22
    MULTIO_BLOCK_CNT                    4
    DELAYLOGWRITER                      0
    LOG_IO_QUEUE                          50
    RESTARTTIME                         600
    MAXCPU                                1
    MAXUSERTASKS                          50
    TRANSRGNS                           8
    TABRGNS                             8
    OMSREGIONS                          0
    OMSRGNS                             25
    OMS_HEAP_LIMIT                        0
    OMS_HEAP_COUNT                        1
    OMS_HEAP_BLOCKSIZE                    10000
    OMS_HEAP_THRESHOLD                    100
    OMS_VERS_THRESHOLD                    2097152
    HEAP_CHECK_LEVEL                      0
    ROWRGNS                             8
    MINSERVER_DESC                      16
    MAXSERVERTASKS                        20
    _MAXTRANS                             288
    MAXLOCKS                              2880
    LOCKSUPPLY_BLOCK                    100
    DEADLOCK_DETECTION                    4
    SESSION_TIMEOUT                       900
    OMS_STREAM_TIMEOUT                    30
    REQUEST_TIMEOUT                       5000
    USEASYNC_IO                         YES
    IOPROCSPER_DEV                      1
    IOPROCSFOR_PRIO                     1
    USEIOPROCS_ONLY                     NO
    IOPROCSSWITCH                       2
    LRU_FOR_SCAN                          NO
    PAGESIZE                            8192
    PACKETSIZE                          36864
    MINREPLYSIZE                        4096
    MBLOCKDATA_SIZE                     32768
    MBLOCKQUAL_SIZE                     16384
    MBLOCKSTACK_SIZE                    16384
    MBLOCKSTRAT_SIZE                    8192
    WORKSTACKSIZE                       16384
    WORKDATASIZE                        8192
    CATCACHE_MINSIZE                    262144
    CAT_CACHE_SUPPLY                      1632
    INIT_ALLOCATORSIZE                    229376
    ALLOW_MULTIPLE_SERVERTASK_UKTS        NO
    TASKCLUSTER01                       tw;al;ut;2000sv,100bup;10ev,10gc;
    TASKCLUSTER02                       ti,100dw;30000us;
    TASKCLUSTER03                       compress
    MPRGN_QUEUE                         YES
    MPRGN_DIRTY_READ                    NO
    MPRGN_BUSY_WAIT                     NO
    MPDISP_LOOPS                        1
    MPDISP_PRIO                         NO
    XP_MP_RGN_LOOP                        0
    MP_RGN_LOOP                           0
    MPRGN_PRIO                          NO
    MAXRGN_REQUEST                        300
    PRIOBASE_U2U                        100
    PRIOBASE_IOC                        80
    PRIOBASE_RAV                        80
    PRIOBASE_REX                        40
    PRIOBASE_COM                        10
    PRIOFACTOR                          80
    DELAYCOMMIT                         NO
    SVP1_CONV_FLUSH                     NO
    MAXGARBAGECOLL                      0
    MAXTASKSTACK                        1024
    MAX_SERVERTASK_STACK                  100
    MAX_SPECIALTASK_STACK                 100
    DWIO_AREA_SIZE                      50
    DWIO_AREA_FLUSH                     50
    FBM_VOLUME_COMPRESSION                50
    FBM_VOLUME_BALANCE                    10
    FBMLOW_IO_RATE                      10
    CACHE_SIZE                            10000
    DWLRU_TAIL_FLUSH                    25
    XP_DATA_CACHE_RGNS                    0
    DATACACHE_RGNS                      8
    XP_CONVERTER_REGIONS                  0
    CONVERTER_REGIONS                     8
    XP_MAXPAGER                           0
    MAXPAGER                              11
    SEQUENCE_CACHE                        1
    IDXFILELIST_SIZE                    2048
    SERVERDESC_CACHE                    73
    SERVERCMD_CACHE                     21
    VOLUMENO_BIT_COUNT                    8
    OPTIM_MAX_MERGE                       500
    OPTIM_INV_ONLY                        YES
    OPTIM_CACHE                           NO
    OPTIM_JOIN_FETCH                      0
    JOIN_SEARCH_LEVEL                     0
    JOIN_MAXTAB_LEVEL4                    16
    JOIN_MAXTAB_LEVEL9                    5
    READAHEADBLOBS                      25
    RUNDIRECTORY                          E:\_mp\u_v_dbs\EVERW_C5
    _KERNELDIAGFILE                       knldiag
    KERNELDIAGSIZE                        800
    _EVENTFILE                            knldiag.evt
    _EVENTSIZE                            0
    _MAXEVENTTASKS                        1
    _MAXEVENTS                            100
    _KERNELTRACEFILE                      knltrace
    TRACE_PAGES_TI                        2
    TRACE_PAGES_GC                        0
    TRACE_PAGES_LW                        5
    TRACE_PAGES_PG                        3
    TRACE_PAGES_US                        10
    TRACE_PAGES_UT                        5
    TRACE_PAGES_SV                        5
    TRACE_PAGES_EV                        2
    TRACE_PAGES_BUP                       0
    KERNELTRACESIZE                       648
    EXTERNAL_DUMP_REQUEST                 NO
    AKDUMP_ALLOWED                      YES
    _KERNELDUMPFILE                       knldump
    _RTEDUMPFILE                          rtedump
    UTILITYPROTFILE                     dbm.utl
    UTILITY_PROTSIZE                      100
    BACKUPHISTFILE                      dbm.knl
    BACKUPMED_DEF                       dbm.mdf
    MAXMESSAGE_FILES                    0
    EVENTALIVE_CYCLE                    0
    _SHAREDDYNDATA                        10280
    _SHAREDDYNPOOL                        3607
    USE_MEM_ENHANCE                       NO
    MEM_ENHANCE_LIMIT                     0
    __PARAM_CHANGED___                    0
    __PARAM_VERIFIED__                    2008-05-13 13:47:17
    DIAG_HISTORY_NUM                      2
    DIAG_HISTORY_PATH                     E:\_mp\u_v_dbs\EVERW_C5\DIAGHISTORY
    DIAGSEM                             1
    SHOW_MAX_STACK_USE                    NO
    LOG_SEGMENT_SIZE                      21333
    SUPPRESS_CORE                         YES
    FORMATTING_MODE                       PARALLEL
    FORMAT_DATAVOLUME                     YES
    HIRES_TIMER_TYPE                      CPU
    LOAD_BALANCING_CHK                    0
    LOAD_BALANCING_DIF                    10
    LOAD_BALANCING_EQ                     5
    HS_STORAGE_DLL                        libhsscopy
    HS_SYNC_INTERVAL                      50
    USE_OPEN_DIRECT                       NO
    SYMBOL_DEMANGLING                     NO
    EXPAND_COM_TRACE                      NO
    OPTIMIZE_OPERATOR_JOIN_COSTFUNC       YES
    OPTIMIZE_JOIN_PARALLEL_SERVERS        0
    OPTIMIZE_JOIN_OPERATOR_SORT           YES
    OPTIMIZE_JOIN_OUTER                   YES
    JOIN_OPERATOR_IMPLEMENTATION          IMPROVED
    JOIN_TABLEBUFFER                      128
    OPTIMIZE_FETCH_REVERSE                YES
    SET_VOLUME_LOCK                       YES
    SHAREDSQL                             NO
    SHAREDSQL_EXPECTEDSTATEMENTCOUNT      1500
    SHAREDSQL_COMMANDCACHESIZE            32768
    MEMORY_ALLOCATION_LIMIT               0
    USE_SYSTEM_PAGE_CACHE                 YES
    USE_COROUTINES                        YES
    MIN_RETENTION_TIME                    60
    MAX_RETENTION_TIME                    480
    MAX_SINGLE_HASHTABLE_SIZE             512
    MAX_HASHTABLE_MEMORY                  5120
    HASHED_RESULTSET                      NO
    HASHED_RESULTSET_CACHESIZE            262144
    AUTO_RECREATE_BAD_INDEXES             NO
    LOCAL_REDO_LOG_BUFFER_SIZE            0
    FORBID_LOAD_BALANCING                 NO

    >
    Lars Breddemann wrote:
    > Hi Michael,
    >
    > this really looks like one of those "Find-the-5-errors-in-the-picture" riddles to me.
    > Really.
    >
    > Ok, first to your question: this seems to be a bug - I could reproduce it with my 7.5. Build 48.
    > Anyhow, when I use
    >
    > insert into "AZ_Z_TEST02"  values (87,'','','','','','','','','','','','','','','',''
    >                                           ,'','','','','','','','','','','','','','','','')
    >
    > it works fine.
    It solves my problem. Thanks a lot. -- I hardly can believe that this is all needed to solve the bug. This may be the reason why I have not given it a try.
    >
    Since explicitely specifying all values for an insert is a good idea anyhow (you can see directly, what value the new tupel will have), you may want to change your code to this.
    >
    > Now to the other errors:
    > - 28 Long values per row?
    > What the heck is wrong with the data design here?
    > Honestly, you can save data up to 2 GB in a BLOB/CLOB.
    > Currently, your data design allows 56 GB per row.
    > Moreover 26 of those columns seems to belong together originally - why do you split them up at all?
    >
    > - The "ZTB_NAMEOFREPORT" looks like something the users see -
    > still there is no unique constraint preventing that you get 10000 of reports with the same name...
    You are right. This table looks a bit strange. The story behind it is: Each crystal report in the application has a few textblocks which are the same for all the e.g. persons the e.g. letter is created for. Principally, the textblocks could be directy added to the crystal report. However, as it is often the case, these textblocks may change once in a while. Thus, I put the texts of the textblock into this "strange" db table (one row for each report, one field for each textblock, the name of the report is given by "ztb_nameofreport"). And the application offers a menue by which these textblocks can be changed. Of course, the fields in the table could be of type CHAR, but LONG has the advantage that I do not have to think about the length of the field, since sometime the texts are short and sometimes they are really long.
    (These texts would blow up the sql select command of the crystal report very much if they were integrated into the this select command. Thus it is realized in another way: the texts are read before the crystal report is loaded, then the texts are "given" to the crystal report (by its parameters), and finally the crystal report is loaded.)
    >
    - MaxDB 7.5 Build 26 ?? Where have you been the last years?
    > Really - download the 7.6.03 Version [here|https://www.sdn.sap.com/irj/sdn/maxdb-downloads] from SDN and upgrade.
    > With 7.6. I was not able to reproduce your issue at all.
    The customer still has Win98 clients. MaxDB odbc driver 7.5.00.26 does not work for them. I got the hint to use odbc driver 7.3 (see [lists.mysql.com/maxdb/25667|lists.mysql.com/maxdb/25667]). Do MaxDB 7.6 and odbc driver 7.3 work together?
    All Win98 clients may be replaced by WinXP clients in the near future. Then, an upgrade may be reasonable.
    >
    - Are you really putting your data into the DBA schema? Don't do that, ever.
    > DBM/SUPERDBA (the sysdba-schemas) are reserved for the MaxDB system tables.
    > Create a user/schema for your application data and put your tables into that.
    >
    > KR Lars
    In the first MaxDB version I used, schemas were not available. I haven't changed it afterwards. Is there an easy way to "move an existing table into a new schema"?
    Michael

  • JFrame which does not allow resizing (maximizing, minimizng)

    I want to develop a login frame which does not allow resizing (maximizing, minimizing as this does not make sense) and with 2 fields, JTextField and JPasswordField.
    The frame is developed but has the usual resizing handles.
    How to do?
    Many tks for any information.
    John Pashley

    Don't use a JFrame. Also, don't expect code like this again; I did it for fun.
    It requires your modification.
    * Title:        Login Screen<p>
    * Description:  Login Screen<p>
    * Class:        Login ScreenLoginScreen<p>
    * Copyright:    who cares<p>
    * Company:      who cares<p>
    * @author who cares
    * @version who cares
    import java.awt.*;
    import java.awt.event.*;
    import java.net.URL;
    import java.util.Vector;
    import java.io.File;
    import javax.swing.*;
    public class LoginScreen extends JDialog implements ActionListener, FocusListener
       private JTextField      name;
       private JPasswordField  password;
       private JButton         loginButton;
       private JButton         cancelButton;
       private JDialog         thisDialog = this;
       private ImageIcon       splashImage;
       private String          appTitle;
       private int             logCounter;
       public LoginScreen()
          super();
          this.toFront();
          setTitle("Login");
          addWindowListener(new WindowAdapter()
             public void windowClosing(WindowEvent e)
                    System.exit(0);
          getContentPane().setLayout(new BorderLayout());
          splashImage = new ImageIcon( getClass().getResource("images" + File.separator + "image.jpg")) );
          getContentPane().add(new JLabel(splashImage), "North");
          getContentPane().add(makeLoginPanel(), "Center");
          getContentPane().add(makeButtonPanel(), "South");
          pack();
          setResizable(false);
          setLocationRelativeTo(null);
          setVisible(true);
        * make login panel
       private JPanel makeLoginPanel()
          JPanel loginPanel = new JPanel();
          JLabel label;
          loginPanel.setBorder(BorderFactory.createEmptyBorder(20, 20, 0, 20));
          GridBagLayout gbl = new GridBagLayout();
          GridBagConstraints gbc = new GridBagConstraints();
          loginPanel.setLayout(gbl);
          gbc.weightx = 1.0;
          gbc.fill = GridBagConstraints.HORIZONTAL;
          gbc.insets = new Insets(0, 5, 10, 5);
          gbc.gridx = 0;
          gbc.gridy = 0;
          label = new JLabel("Login Name:", SwingConstants.LEFT);
          gbl.setConstraints(label, gbc);
          loginPanel.add(label);
          gbc.gridx = 1;
          name = new JTextField("insider", 10);
          name.addFocusListener(this);
          gbl.setConstraints(name, gbc);
          loginPanel.add(name);
          gbc.gridx = 0;
          gbc.gridy = 1;
          label = new JLabel("Password:", SwingConstants.LEFT);
          gbl.setConstraints(label, gbc);
          loginPanel.add(label);
          gbc.gridx = 1;
          password = new JPasswordField("insider",10);
          password.addFocusListener(this);
          gbl.setConstraints(password, gbc);
          loginPanel.add(password);
          return loginPanel;
        * make button panel
       private JPanel makeButtonPanel()
          JPanel buttonPanel = new JPanel();
          buttonPanel.setBorder(BorderFactory.createEmptyBorder(10, 10, 10, 10));
          //make LogIn button
          loginButton = new JButton("Login");
          loginButton.setActionCommand("Login");
          buttonPanel.add(loginButton);
          rootPane.setDefaultButton(loginButton);
          loginButton.addActionListener(this);
          this.getRootPane().setDefaultButton(loginButton);
          //make Cancel button
          cancelButton = new JButton("Cancel");
          cancelButton.setActionCommand("Cancel");
          buttonPanel.add(cancelButton);
          cancelButton.addActionListener(this);
          this.addKeyListener(new KeyAdapter()
             public void keyReleased(KeyEvent e)
                if(e.getKeyCode() == KeyEvent.VK_ESCAPE)
                   cancelButton.doClick();
             return buttonPanel;
        * Action handler for login and cancel buttons
       public void actionPerformed(ActionEvent e)
          JButton btn = (JButton) e.getSource();
          if (btn.getActionCommand().equals("Login"))
             // Because login() process happens before swing process (above),
             // force it to happen "later"
             SwingUtilities.invokeLater(new Runnable()
                public void run()
                   login(); //create this method, okay?!
          else if (btn.getActionCommand().equals("Cancel"))
             System.exit(0);
        * Focus gained handler for username and password buttons
       public void focusGained(FocusEvent e)
          JTextField tf = (JTextField) e.getSource();
          tf.selectAll();
        * Focus lost handler for username and password buttons
       public void focusLost(FocusEvent e) {}
       private void showErrorMessage(String message, String header)
          JOptionPane.showMessageDialog(getContentPane(),
                                        message, header,
                                        JOptionPane.ERROR_MESSAGE);
        * This method controls the cursor for login window. If isWait is set to
        * true, dialog's cursor is set to Cursor.WAIT_CURSOR. If isWait is set
        * to false, the cursor is set ta Deafult.
        * While the window is in WAIT mode, this method will also disable Login
        * and Cancel buttons to ensure the user does not accidently request
        * a cancel while loging in or launching a second login.
       private void setWaitCursor(boolean isWait)
          /* In order to disable login and cancel buttons while logging in to the
             application, this method will temporarely change action commands and
             reset them when login process failed to give user another chance.
             Note: Disabling the buttons by calling setEnabled(false) did not work
             since login() method is called from an action event handler and the
             process will not be released to AWT until login method is complete.
          if (isWait)
             this.getGlassPane().setCursor(new Cursor(Cursor.WAIT_CURSOR));
             this.getGlassPane().setVisible(true);
             loginButton.setActionCommand("none");
             cancelButton.setActionCommand("none");
          else
             this.getGlassPane().setCursor(Cursor.getDefaultCursor());
             this.getGlassPane().setVisible(false);
             loginButton.setActionCommand("Login");
             cancelButton.setActionCommand("Cancel");
    } //end loginscreen

Maybe you are looking for

  • Build daily Big flat file using SAP R/3 material master data

    Hi all, I must build an interface between SAP R/3 4.7 and an external application Daily a flat file must be generated contaning Material data in full exchange mode (volume 100 000 materials, <10 fields => ~ File of 30Mo) No complex mapping, only form

  • Windows 7 with Airport Extreme External HD Connected

    I have read for the past few hours and worked to get my new Toshiba Windows 7 laptop to recognize my external hard drive that is connected to my Airport Extreme.  I have 2 other laptops, Windows XP, that connected without problems.  I have tried almo

  • JTree Display keeps Repainting and Missing Information

    I have a JTree that has objects for each node. When I try to send regular Text in the toString of the object, I have no issues with the display of the Tree. When I send HTML, the screen has issues with the repaint?? I expand the Tree and some of the

  • Updating sceen elements in a for loop?

    Hi I have a for loop that, among other things, contains an appendText command.  It adds a character to a text box on the screen. I notice that rather than append the text on each iteration, it waits until the for loop has finished, and then appends a

  • Authority-Check in UPDATE TASK CALL

    Hi Gurus, Does anybody know, from the Technical point of view, if there is any special issue with an Authority-Check put in a user-exit called in UPDATE TASK? Thanks & Regards Ernesto.