GDM is starting twice

Folks,
I have configured GDM using the Wiki instructions. When I reboot, GDM login screen appears fine, but after a few seconds GDM tries to start again:
There already appears to be an X server running on display :0. Should another display number by tried? (...)
How do I avoid this?
Thanks!
Last edited by rebeldevel (2007-11-01 11:33:13)

was it a configuration mistake or does i have to do with this gdm shutdown problem http://bugs.archlinux.org/task/8125 ?
If yes, how did you solved it?

Similar Messages

  • Daemon starting twice

    Hello everyone,
       I know this is gonna sound a lil bit n00bish but then i'm a n00b.The problem is that "acpid" is starting twice while boot-up even though its enterd only once in /etc/rc.conf,i donno whats woring,is it whether the sequence in which ive put up the daemons or is it that some other program is starting it.Here's my daemon section of rc.conf file:-
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    #   - prefix a daemon with a ! to disable it
    #   - prefix a daemon with a @ to start it up in the background
    DAEMONS=(syslog-ng !hotplug !pcmcia network netfs crond dbus hal acpid gdm alsa)
    Can anyone tell me whats going wrong?
    Thanks in advance,
    Rajiv Nair

    it just a guess, but: maybe a daemon u start "depends" on acpid and starts it with it (like portmap is started when u start fam).
    just try putting acpid behind syslon-ng on 2nd place and see what u get
    good luck,
    cheers,
    detto

  • Photoshop CS6 Cloud 13.1.1 32-bit & 64-bit keeps asking to licence software at start twice

    Photoshop CS6 Cloud 13.1.1 32-bit & 64-bit keeps asking to licence software at start twice. Once when i start it and again once I sign in? I recently refreshed the host file in windows to see if helped but not.
    Regards
    James Howarth

    Hi James,
    This is a known issue with Photoshop CS6 specifically and will be addressed with a future update soon.
    The temporary solutions are to either uninstall Photoshop CS6 and not install the 13.1.1 update or continue signing in every few launches until an update is released.
    We have this document about the issue here:
    Trial screen displays when you open Photoshop CS6
    http://helpx.adobe.com/photoshop/kb/trial-screen-displays-you-open.html
    -Dace

  • Don't allow a report to start twice

    Hi,
    I want to start a report by a job every 10 minutes.
    But if the last job has not finished
    a: I don't want to start the next job or
    b: the new report shout stop his work without doing anything.
    Is it possible to check if the rport is started twice?
    Thanks, Stefan

    HI stephan,
    Create a ztable and update this with a flag , since the ABAP memory or SAP memory
    will stay till the session is active, and during every run you can check this flag from database in
    PBO/AT SELECTION-SCREEN OUTPUT Else exit/STOP etc
    You can also MODIFY this DB table to have only 1 record always to avoid unnecessary Memory Usage.
    First time just check the flag and Clear this Flag from DB at the end of successful run again set it back with something like X
    if you feel ABAP/SAP memory would work for you then you can go with that option aswell.
    Hope this would serve your purpose.
    You can use TBTCO for this purpose.
    " You can use the Field CHECKSTAT which says Job status check indicator for subsequent job start
    Cheerz
    Ram

  • SLiM only starts twice then exits to tty1

    Hi... i've installed arch yesterday following this guide https://wiki.archlinux.org/index.php/Beginners'_Guide i
    After that i started to set up a new desktop using openbox and slim.
    Basically everything works fine... except that after exiting openbox 2 times slim won't start and i end at tty1.
    systemctl status slim... after boot
    slim.service - SLiM Simple Login Manager
    Loaded: loaded (/usr/lib/systemd/system/slim.service; enabled)
    Active: active (running) since Di 2013-03-19 19:05:10 CET; 1min 10s ago
    Main PID: 241 (slim)
    CGroup: name=systemd:/system/slim.service
    └─264 /usr/bin/X -nolisten tcp vt07 -auth /var/run/slim.auth
    ‣ 241 /usr/bin/slim -nodaemon
    ... after 1st "openbox logout"
    slim.service - SLiM Simple Login Manager
    Loaded: loaded (/usr/lib/systemd/system/slim.service; enabled)
    Active: active (running) since Di 2013-03-19 19:05:10 CET; 1min 50s ago
    Main PID: 241 (slim)
    CGroup: name=systemd:/system/slim.service
    ...after 2nt logout on tty1
    slim.service - SLiM Simple Login Manager
    Loaded: loaded (/usr/lib/systemd/system/slim.service; enabled)
    Active: failed (Result: exit-code) since Di 2013-03-19 19:07:04 CET; 23s ago
    Process: 241 ExecStart=/usr/bin/slim -nodaemon (code=exited, status=1/FAILURE)
    /var/log/slim.log
    slim: waiting for X server to begin accepting connections.
    slim: waiting for X server to shut down
    slim: waiting for X server to begin accepting connections.
    systemctl list-units
    UNIT LOAD ACTIVE SUB DESCRIPTION
    proc-sys...t_misc.automount loaded active running Arbitrary Executable File Formats File System Automount Point
    sys-devi...-sda-sda1.device loaded active plugged IC25N080ATMR04-0
    sys-devi...-sda-sda2.device loaded active plugged IC25N080ATMR04-0
    sys-devi...-sda-sda3.device loaded active plugged IC25N080ATMR04-0
    sys-devi...-sda-sda4.device loaded active plugged IC25N080ATMR04-0
    sys-devi...block-sda.device loaded active plugged IC25N080ATMR04-0
    sys-devi...block-sr0.device loaded active plugged _NEC_DVD+_-RW_ND-6500A
    sys-devi...und-card0.device loaded active plugged /sys/devices/pci0000:00/0000:00:02.7/sound/card0
    sys-devi...et-enp0s4.device loaded active plugged /sys/devices/pci0000:00/0000:00:04.0/net/enp0s4
    sys-devi...et-wlp2s0.device loaded active plugged /sys/devices/pci0000:00/0000:00:09.0/0000:02:00.0/net/wlp2s0
    sys-devi...tty-ttyS0.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS0
    sys-devi...tty-ttyS1.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS1
    sys-devi...tty-ttyS2.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS2
    sys-devi...tty-ttyS3.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS3
    sys-module-configfs.device loaded active plugged /sys/module/configfs
    sys-subs...es-enp0s4.device loaded active plugged /sys/subsystem/net/devices/enp0s4
    sys-subs...es-wlp2s0.device loaded active plugged /sys/subsystem/net/devices/wlp2s0
    -.mount loaded active mounted /
    boot.mount loaded active mounted /boot
    dev-hugepages.mount loaded active mounted Huge Pages File System
    dev-mqueue.mount loaded active mounted POSIX Message Queue File System
    home.mount loaded active mounted /home
    proc-sys...infmt_misc.mount loaded active mounted Arbitrary Executable File Formats File System
    sys-kernel-config.mount loaded active mounted Configuration File System
    sys-kernel-debug.mount loaded active mounted Debug File System
    tmp.mount loaded active mounted Temporary Directory
    systemd-...ord-console.path loaded active waiting Dispatch Password Requests to Console Directory Watch
    systemd-...ssword-wall.path loaded active waiting Forward Password Requests to Wall Directory Watch
    dbus.service loaded active running D-Bus System Message Bus
    [email protected] loaded active running Getty on tty1
    net-auto-wireless.service loaded active running Provides automatic netcfg wireless connection
    ntpd.service loaded active running Network Time Service
    slim.service loaded failed failed SLiM Simple Login Manager
    systemd-binfmt.service loaded active exited Set Up Additional Binary Formats
    systemd-journald.service loaded active running Journal Service
    systemd-logind.service loaded active running Login Service
    systemd-remount-fs.service loaded active exited Remount Root and Kernel File Systems
    systemd-sysctl.service loaded active exited Apply Kernel Variables
    systemd-...es-setup.service loaded active exited Recreate Volatile Files and Directories
    systemd-...-trigger.service loaded active exited udev Coldplug all Devices
    systemd-udevd.service loaded active running udev Kernel Device Manager
    systemd-...sessions.service loaded active exited Permit User Sessions
    systemd-...le-setup.service loaded active exited Setup Virtual Console
    dbus.socket loaded active running D-Bus System Message Bus Socket
    dmeventd.socket loaded active listening Device-mapper event daemon FIFOs
    lvmetad.socket loaded active listening LVM2 metadata daemon socket
    systemd-initctl.socket loaded active listening /dev/initctl Compatibility Named Pipe
    systemd-journald.socket loaded active running Journal Socket
    systemd-shutdownd.socket loaded active listening Delayed Shutdown Socket
    systemd-...d-control.socket loaded active listening udev Control Socket
    systemd-udevd-kernel.socket loaded active running udev Kernel Socket
    dev-sda2.swap loaded active active /dev/sda2
    basic.target loaded active active Basic System
    cryptsetup.target loaded active active Encrypted Volumes
    getty.target loaded active active Login Prompts
    graphical.target loaded active active Graphical Interface
    local-fs-pre.target loaded active active Local File Systems (Pre)
    local-fs.target loaded active active Local File Systems
    multi-user.target loaded active active Multi-User
    network.target loaded active active Network
    remote-fs.target loaded active active Remote File Systems
    sockets.target loaded active active Sockets
    sound.target loaded active active Sound Card
    swap.target loaded active active Swap
    sysinit.target loaded active active System Initialization
    systemd-...iles-clean.timer loaded active waiting Daily Cleanup of Temporary Directories
    /etc/slim.conf
    # Path, X server and arguments (if needed)
    # Note: -xauth $authfile is automatically appended
    default_path /bin:/usr/bin:/usr/local/bin
    default_xserver /usr/bin/X
    xserver_arguments -nolisten tcp vt07
    # Commands for halt, login, etc.
    halt_cmd /sbin/shutdown -h now
    reboot_cmd /sbin/shutdown -r now
    console_cmd /usr/bin/xterm -C -fg white -bg black +sb -T "Console login" -e /bin/sh -c "/bin/cat /etc/issue; exec /bin/login"
    #suspend_cmd /usr/sbin/suspend
    # Full path to the xauth binary
    xauth_path /usr/bin/xauth
    # Xauth file for server
    authfile /var/run/slim.auth
    # Activate numlock when slim starts. Valid values: on|off
    # numlock on
    # Hide the mouse cursor (note: does not work with some WMs).
    # Valid values: true|false
    # hidecursor false
    # This command is executed after a succesful login.
    # you can place the %session and %theme variables
    # to handle launching of specific commands in .xinitrc
    # depending of chosen session and slim theme
    # NOTE: if your system does not have bash you need
    # to adjust the command according to your preferred shell,
    # i.e. for freebsd use:
    # login_cmd exec /bin/sh - ~/.xinitrc %session
    login_cmd exec /bin/bash -login ~/.xinitrc %session
    # Commands executed when starting and exiting a session.
    # They can be used for registering a X11 session with
    # sessreg. You can use the %user variable
    # sessionstart_cmd some command
    # sessionstop_cmd some command
    # Start in daemon mode. Valid values: yes | no
    # Note that this can be overriden by the command line
    # options "-d" and "-nodaemon"
    # daemon yes
    # Available sessions (first one is the default).
    # The current chosen session name is replaced in the login_cmd
    # above, so your login command can handle different sessions.
    # see the xinitrc.sample file shipped with slim sources
    # sessions xfce4,icewm-session,wmaker,blackbox
    # Executed when pressing F11 (requires imagemagick)
    screenshot_cmd import -window root /slim.png
    # welcome message. Available variables: %host, %domain
    welcome_msg Welcome to %host
    # Session message. Prepended to the session name when pressing F1
    # session_msg Session:
    # shutdown / reboot messages
    shutdown_msg The system is halting...
    reboot_msg The system is rebooting...
    # default user, leave blank or remove this line
    # for avoid pre-loading the username.
    # default_user simone
    # Focus the password field on start when default_user is set
    # Set to "yes" to enable this feature
    # focus_password no
    # Automatically login the default user (without entering
    # the password. Set to "yes" to enable this feature
    #auto_login no
    # current theme, use comma separated list to specify a set to
    # randomly choose from
    current_theme default
    # Lock file
    lockfile /var/run/lock/slim.lock
    # Log file
    logfile /var/log/slim.log
    When i run "systemctl start slim" on tty1 slim starts again and after exiting openbox twice i'm back on tty1.
    ...But when i run "slim" on tty1 slim starts and i can exit openbox as often as i want.
    Any ideas ?
    Edit:
    Running /usr/bin/slim from tty1 gives me this logfile.
    /var/log/slim.log
    slim: waiting for X server to begin accepting connections.
    slim: waiting for X server to shut down
    slim: waiting for X server to begin accepting connections.
    slim: waiting for X server to shut down
    slim: waiting for X server to begin accepting connections.
    Somehow the second "slim: waiting for X server to shut down" does not happen when running "systemctl start slim"
    Last edited by Synth (2013-03-19 19:39:10)

    Ok, I was able to workaround parts of the bug:
    I changed slim.conf and and set daemon = true (so slim runs as a daemon). Furthermore changed the slim.service file for systemd:
    [Service]
    Type = forking
    PIDFile = /var/lock/slim.lock
    ExecStart=/usr/bin/slim
    Now I can log in and out as often as I want. Seems to work. However, nm-applet only shows up in odd numbers of logins:
    1st login --> nm-applet is shown
    2nd login --> nm-applet is not shown (but running --> htop)
    3rd login --> nm-applet is shown
    4th login --> nm-applet is not shown (but running --> htop)
    ...and so on...
    I search the web, it seems to be a problem with dbus and the order how the services get started. Don't know if that is true...any ideas from anyone?

  • GDM not starting

    I just upgraded to GNOME 3.8 through the gnome-unstable repo, but GDM doesn't seem to be starting. The main problems seem to be that it's "unable to create drawable", that the gnome-settings-daemon is unavailable, and there are some font-config issues.
    Here is the log:
    /etc/gdm/Xsession: Beginning session setup...
    localuser:mmcmillan being added to access control list
    /etc/gdm/Xsession: Setup done, will execute: /usr/bin/ssh-agent -- gnome-session
    GNOME_KEYRING_CONTROL=/run/user/1000/keyring-8uogYL
    SSH_AUTH_SOCK=/run/user/1000/keyring-8uogYL/ssh
    GPG_AGENT_INFO=/run/user/1000/keyring-8uogYL/gpg:0:1
    GNOME_KEYRING_CONTROL=/run/user/1000/keyring-8uogYL
    SSH_AUTH_SOCK=/run/user/1000/keyring-8uogYL/ssh
    GNOME_KEYRING_CONTROL=/run/user/1000/keyring-8uogYL
    SSH_AUTH_SOCK=/run/user/1000/keyring-8uogYL/ssh
    GPG_AGENT_INFO=/run/user/1000/keyring-8uogYL/gpg:0:1
    GNOME_KEYRING_CONTROL=/run/user/1000/keyring-8uogYL
    SSH_AUTH_SOCK=/run/user/1000/keyring-8uogYL/ssh
    GPG_AGENT_INFO=/run/user/1000/keyring-8uogYL/gpg:0:1
    (gnome-settings-daemon:20052): color-plugin-WARNING **: failed to reset xrandr-Acer Technologies-V173-LBN0C0324001 gamma tables: gamma size is zero
    ** Message: applet now removed from the notification area
    Failed to play sound: File or data not found
    (empathy:20099): libnotify-WARNING **: Failed to connect to proxy
    JS LOG: GNOME Shell started at Sun Apr 07 2013 14:06:52 GMT-0400 (EDT)
    JS LOG: Extension "[email protected]" had error: Error: extension is not compatible with current GNOME Shell and/or GJS version
    JS LOG: Extension "[email protected]" had error: Error: Strange version number (extension.js:8).
    failed to create drawable
    failed to create drawable
    failed to create drawable
    failed to create drawable
    failed to create drawable
    failed to create drawable
    failed to create drawable
    failed to create drawable
    failed to create drawable
    failed to create drawable
    failed to create drawable
    failed to create drawable
    failed to create drawable
    failed to create drawable
    failed to create drawable
    failed to create drawable
    failed to create drawable
    failed to create drawable
    failed to create drawable
    failed to create drawable
    failed to create drawable
    failed to create drawable
    failed to create drawable
    failed to create drawable
    ** Message: applet now embedded in the notification area
    failed to create drawable
    failed to create drawable
    failed to create drawable
    failed to create drawable
    failed to create drawable
    failed to create drawable
    failed to create drawable
    failed to create drawable
    failed to create drawable
    failed to create drawable
    Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
    Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
    [20242:20270:0407/140738:ERROR:object_proxy.cc(624)] Failed to get name owner. Got org.freedesktop.DBus.Error.NameHasNoOwner: Could not get owner of name 'org.chromium.Mtpd': no such name
    [20242:20270:0407/140738:ERROR:object_proxy.cc(624)] Failed to get name owner. Got org.freedesktop.DBus.Error.NameHasNoOwner: Could not get owner of name 'org.chromium.Mtpd': no such name
    [20242:20242:0407/140738:ERROR:object_proxy.cc(529)] Failed to call method: org.chromium.Mtpd.EnumerateStorages: object_path= /org/chromium/Mtpd: org.freedesktop.DBus.Error.ServiceUnknown: The name org.chromium.Mtpd was not provided by any .service files
    [20242:20301:0407/140738:ERROR:connection.cc(730)] sqlite error 19, errno -2: PRIMARY KEY must be unique
    [20242:20242:0407/140738:ERROR:omnibox_view_gtk.cc(431)] Not implemented reached in virtual void OmniboxViewGtk::ApplyCaretVisibility()
    No bp log location saved, using default.
    [000:000] Browser XEmbed support present: 1
    [000:000] Browser toolkit is Gtk2.
    [000:000] Using Gtk2 toolkit
    [000:004] Starting client channel.
    [000:005] Warning(clientchannel.cc:436): Unreadable or no port file. Could not initiate GoogleTalkPlugin connection
    [000:005] Warning(clientchannel.cc:411): Could not initiate GoogleTalkPlugin connection
    [000:005] GoogleTalkPlugin not running. Starting new process...
    [000:005] Warning(pluginutils.cc:251): Failed to get GoogleTalkPlugin path. Trying default.
    [000:006] Started GoogleTalkPlugin, path=/opt/google/talkplugin/GoogleTalkPlugin
    [000:007] Waiting for GoogleTalkPlugin to start...
    sh: lsb_release: command not found
    [001:102] Attempting to connect to GoogleTalkPlugin...
    [001:103] Read port file, port=46498
    [001:107] Initiated connection to GoogleTalkPlugin
    [001:203] Socket connection established
    [001:203] ScheduleOnlineCheck: Online check in 5000ms
    [001:303] Got cookie response, socket is authorized
    [001:303] AUTHORIZED; socket handshake complete
    [001:305] F->C: ["fs",{"pr":"a"}]
    [001:404] F->C: ["mf","mf3.17","3.17.0.0",2,{"audioCodecs":[[103,"ISAC",1,0,16000],[104,"ISAC",1,0,32000],[9,"G722",1,64000,16000],[102,"ILBC",1,13300,8000],[0,"PCMU",1,64000,8000],[8,"PCMA",1,64000,8000],[107,"CN",1,0,48000],[106,"CN",1,0,32000],[105,"CN",1,0,16000],[13,"CN",1,0,8000],[127,"red",1,0,8000],[126,"telephone-event",1,0,8000]],"audioRtpHdrExts":[{"id":1,"uri":"urn:ietf:params:rtp-hdrext:ssrc-audio-level"}],"camDeviceName":"Unknown Camera","caps":7,"cpuArchitecture":1,"cpuCacheSize":6291456,"cpuFamily":6,"cpuFlags":["sse2","ssse3","sse4_1","sse4_2","avx"],"cpuHasSSE2":true,"cpuModel":42,"cpuSpeed":3101,"cpuStepping":7,"cpuVendor":"GenuineIntel","cpus":4,"cpusPhysical":4,"cryptoSuites":["AES_CM_128_HMAC_SHA1_80","AES_CM_128_HMAC_SHA1_32"],"dataChannelVersion":1,"effectsVersion":9,"gpuDescription":"","gpuDeviceId":0,"gpuDeviceName":"","gpuDriver":"","gpuDriverVersion":"","gpuVendorId":0,"machineModel":"Not available","remotingAssistanceAllowed":0,"remotingVersion":1,"renderer":2,"rtcpMux":true,"screencast":2,"screencastLocalPreview":1,"supportsConcurrentSessions":true,"transports":["i","gice"],"videoCodecs":[[99,"H264-SVC",640,360,30],[97,"H264",640,360,30],[98,"H263",640,360,30]],"videoRtpHdrExts":[{"id":2,"uri":"urn:ietf:params:rtp-hdrext:toffset"}]}]
    [001:505] F->C: ["getdevicestate","15","0",["__default_device","Built-in Audio Analog Stereo"],"0",["__default_device","Built-in Audio Analog Stereo"],"-1",[]]
    [006:217] HandleOnlineCheck: Starting check
    [006:217] HandleOnlineCheck: OK; current state: 3
    [20242:20242:0407/140825:ERROR:omnibox_view_gtk.cc(431)] Not implemented reached in virtual void OmniboxViewGtk::ApplyCaretVisibility()
    ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave
    ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave
    ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave
    ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave
    Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
    Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
    [21561:21589:0407/144922:ERROR:object_proxy.cc(624)] Failed to get name owner. Got org.freedesktop.DBus.Error.NameHasNoOwner: Could not get owner of name 'org.chromium.Mtpd': no such name
    [21561:21589:0407/144922:ERROR:object_proxy.cc(624)] Failed to get name owner. Got org.freedesktop.DBus.Error.NameHasNoOwner: Could not get owner of name 'org.chromium.Mtpd': no such name
    [21561:21561:0407/144923:ERROR:object_proxy.cc(529)] Failed to call method: org.chromium.Mtpd.EnumerateStorages: object_path= /org/chromium/Mtpd: org.freedesktop.DBus.Error.ServiceUnknown: The name org.chromium.Mtpd was not provided by any .service files
    [21561:21620:0407/144923:ERROR:connection.cc(730)] sqlite error 19, errno -2: PRIMARY KEY must be unique
    [21561:21561:0407/144923:ERROR:omnibox_view_gtk.cc(431)] Not implemented reached in virtual void OmniboxViewGtk::ApplyCaretVisibility()
    [21561:21561:0407/144953:ERROR:omnibox_view_gtk.cc(431)] Not implemented reached in virtual void OmniboxViewGtk::ApplyCaretVisibility()
    [21561:21561:0407/145013:ERROR:omnibox_view_gtk.cc(431)] Not implemented reached in virtual void OmniboxViewGtk::ApplyCaretVisibility()
    Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
    Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
    Window manager warning: Treating resize request of legacy application 0x1e00020 (Guake!) as a fullscreen request
    JS LOG: pushModal: invocation of begin_modal failed
    Window manager warning: Treating resize request of legacy application 0x1e00020 (Guake!) as a fullscreen request
    JS LOG: pushModal: invocation of begin_modal failed
    [21968:21994:0407/145044:ERROR:object_proxy.cc(624)] Failed to get name owner. Got org.freedesktop.DBus.Error.NameHasNoOwner: Could not get owner of name 'org.chromium.Mtpd': no such name
    [21968:21994:0407/145044:ERROR:object_proxy.cc(624)] Failed to get name owner. Got org.freedesktop.DBus.Error.NameHasNoOwner: Could not get owner of name 'org.chromium.Mtpd': no such name
    [21968:22025:0407/145044:ERROR:connection.cc(730)] sqlite error 19, errno -2: PRIMARY KEY must be unique
    [21968:21968:0407/145044:ERROR:object_proxy.cc(529)] Failed to call method: org.chromium.Mtpd.EnumerateStorages: object_path= /org/chromium/Mtpd: org.freedesktop.DBus.Error.ServiceUnknown: The name org.chromium.Mtpd was not provided by any .service files
    [21968:21968:0407/145044:ERROR:omnibox_view_gtk.cc(431)] Not implemented reached in virtual void OmniboxViewGtk::ApplyCaretVisibility()
    Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
    Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
    Window manager warning: Treating resize request of legacy application 0x1e00020 (Guake!) as a fullscreen request
    [22418:22445:0407/145440:ERROR:object_proxy.cc(624)] Failed to get name owner. Got org.freedesktop.DBus.Error.NameHasNoOwner: Could not get owner of name 'org.chromium.Mtpd': no such name
    [22418:22445:0407/145440:ERROR:object_proxy.cc(624)] Failed to get name owner. Got org.freedesktop.DBus.Error.NameHasNoOwner: Could not get owner of name 'org.chromium.Mtpd': no such name
    [22418:22418:0407/145440:ERROR:object_proxy.cc(529)] Failed to call method: org.chromium.Mtpd.EnumerateStorages: object_path= /org/chromium/Mtpd: org.freedesktop.DBus.Error.ServiceUnknown: The name org.chromium.Mtpd was not provided by any .service files
    [22418:22477:0407/145440:ERROR:connection.cc(730)] sqlite error 19, errno -2: PRIMARY KEY must be unique
    [22418:22418:0407/145441:ERROR:omnibox_view_gtk.cc(431)] Not implemented reached in virtual void OmniboxViewGtk::ApplyCaretVisibility()
    [22418:22418:0407/145548:ERROR:omnibox_view_gtk.cc(431)] Not implemented reached in virtual void OmniboxViewGtk::ApplyCaretVisibility()
    [22418:22418:0407/145607:ERROR:omnibox_view_gtk.cc(431)] Not implemented reached in virtual void OmniboxViewGtk::ApplyCaretVisibility()
    Window manager warning: Treating resize request of legacy application 0x1e00020 (Guake!) as a fullscreen request
    [22418:22418:0407/145727:ERROR:omnibox_view_gtk.cc(431)] Not implemented reached in virtual void OmniboxViewGtk::ApplyCaretVisibility()
    No bp log location saved, using default.
    [000:000] Browser XEmbed support present: 1
    [000:000] Browser toolkit is Gtk2.
    [000:000] Using Gtk2 toolkit
    [000:005] Starting client channel.
    [000:005] Warning(clientchannel.cc:436): Unreadable or no port file. Could not initiate GoogleTalkPlugin connection
    [000:006] Warning(clientchannel.cc:411): Could not initiate GoogleTalkPlugin connection
    [000:006] GoogleTalkPlugin not running. Starting new process...
    [000:006] Warning(pluginutils.cc:251): Failed to get GoogleTalkPlugin path. Trying default.
    [000:007] Started GoogleTalkPlugin, path=/opt/google/talkplugin/GoogleTalkPlugin
    [000:008] Waiting for GoogleTalkPlugin to start...
    sh: lsb_release: command not found
    [001:102] Attempting to connect to GoogleTalkPlugin...
    [001:102] Read port file, port=48370
    [001:103] Initiated connection to GoogleTalkPlugin
    [001:210] Socket connection established
    [001:210] ScheduleOnlineCheck: Online check in 5000ms
    [001:304] Got cookie response, socket is authorized
    [001:304] AUTHORIZED; socket handshake complete
    [001:306] F->C: ["fs",{"pr":"a"}]
    [001:405] F->C: ["mf","mf3.17","3.17.0.0",2,{"audioCodecs":[[103,"ISAC",1,0,16000],[104,"ISAC",1,0,32000],[9,"G722",1,64000,16000],[102,"ILBC",1,13300,8000],[0,"PCMU",1,64000,8000],[8,"PCMA",1,64000,8000],[107,"CN",1,0,48000],[106,"CN",1,0,32000],[105,"CN",1,0,16000],[13,"CN",1,0,8000],[127,"red",1,0,8000],[126,"telephone-event",1,0,8000]],"audioRtpHdrExts":[{"id":1,"uri":"urn:ietf:params:rtp-hdrext:ssrc-audio-level"}],"camDeviceName":"Unknown Camera","caps":7,"cpuArchitecture":1,"cpuCacheSize":6291456,"cpuFamily":6,"cpuFlags":["sse2","ssse3","sse4_1","sse4_2","avx"],"cpuHasSSE2":true,"cpuModel":42,"cpuSpeed":3101,"cpuStepping":7,"cpuVendor":"GenuineIntel","cpus":4,"cpusPhysical":4,"cryptoSuites":["AES_CM_128_HMAC_SHA1_80","AES_CM_128_HMAC_SHA1_32"],"dataChannelVersion":1,"effectsVersion":9,"gpuDescription":"","gpuDeviceId":0,"gpuDeviceName":"","gpuDriver":"","gpuDriverVersion":"","gpuVendorId":0,"machineModel":"Not available","remotingAssistanceAllowed":0,"remotingVersion":1,"renderer":2,"rtcpMux":true,"screencast":2,"screencastLocalPreview":1,"supportsConcurrentSessions":true,"transports":["i","gice"],"videoCodecs":[[99,"H264-SVC",640,360,30],[97,"H264",640,360,30],[98,"H263",640,360,30]],"videoRtpHdrExts":[{"id":2,"uri":"urn:ietf:params:rtp-hdrext:toffset"}]}]
    [001:506] F->C: ["getdevicestate","15","0",["__default_device","Built-in Audio Analog Stereo"],"0",["__default_device","Built-in Audio Analog Stereo"],"-1",[]]
    [005:311] Starting client channel.
    [005:311] Warning(clientchannel.cc:436): Unreadable or no port file. Could not initiate GoogleTalkPlugin connection
    [005:312] Warning(clientchannel.cc:411): Could not initiate GoogleTalkPlugin connection
    [005:312] GoogleTalkPlugin not running. Starting new process...
    [005:312] Warning(pluginutils.cc:251): Failed to get GoogleTalkPlugin path. Trying default.
    [005:313] Started GoogleTalkPlugin, path=/opt/google/talkplugin/GoogleTalkPlugin
    [005:313] Waiting for GoogleTalkPlugin to start...
    sh: lsb_release: command not found
    [006:411] Attempting to connect to GoogleTalkPlugin...
    [006:411] Read port file, port=45084
    [006:424] Initiated connection to GoogleTalkPlugin
    [006:512] Socket connection established
    [006:512] ScheduleOnlineCheck: Online check in 5000ms
    [006:613] Got cookie response, socket is authorized
    [006:613] AUTHORIZED; socket handshake complete
    [006:620] F->C: ["fs",{"pr":"a"}]
    [006:713] F->C: ["mf","mf3.17","3.17.0.0",2,{"audioCodecs":[[103,"ISAC",1,0,16000],[104,"ISAC",1,0,32000],[9,"G722",1,64000,16000],[102,"ILBC",1,13300,8000],[0,"PCMU",1,64000,8000],[8,"PCMA",1,64000,8000],[107,"CN",1,0,48000],[106,"CN",1,0,32000],[105,"CN",1,0,16000],[13,"CN",1,0,8000],[127,"red",1,0,8000],[126,"telephone-event",1,0,8000]],"audioRtpHdrExts":[{"id":1,"uri":"urn:ietf:params:rtp-hdrext:ssrc-audio-level"}],"camDeviceName":"Unknown Camera","caps":7,"cpuArchitecture":1,"cpuCacheSize":6291456,"cpuFamily":6,"cpuFlags":["sse2","ssse3","sse4_1","sse4_2","avx"],"cpuHasSSE2":true,"cpuModel":42,"cpuSpeed":3101,"cpuStepping":7,"cpuVendor":"GenuineIntel","cpus":4,"cpusPhysical":4,"cryptoSuites":["AES_CM_128_HMAC_SHA1_80","AES_CM_128_HMAC_SHA1_32"],"dataChannelVersion":1,"effectsVersion":9,"gpuDescription":"","gpuDeviceId":0,"gpuDeviceName":"","gpuDriver":"","gpuDriverVersion":"","gpuVendorId":0,"machineModel":"Not available","remotingAssistanceAllowed":0,"remotingVersion":1,"renderer":2,"rtcpMux":true,"screencast":2,"screencastLocalPreview":1,"supportsConcurrentSessions":true,"transports":["i","gice"],"videoCodecs":[[99,"H264-SVC",640,360,30],[97,"H264",640,360,30],[98,"H263",640,360,30]],"videoRtpHdrExts":[{"id":2,"uri":"urn:ietf:params:rtp-hdrext:toffset"}]}]
    [006:814] F->C: ["getdevicestate","15","0",["__default_device","Built-in Audio Analog Stereo"],"0",["__default_device","Built-in Audio Analog Stereo"],"-1",[]]
    [011:521] HandleOnlineCheck: Starting check
    [011:521] HandleOnlineCheck: OK; current state: 3
    [22418:22418:0407/145831:ERROR:omnibox_view_gtk.cc(431)] Not implemented reached in virtual void OmniboxViewGtk::ApplyCaretVisibility()
    Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
    Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
    Window manager warning: Treating resize request of legacy application 0x1e00020 (Guake!) as a fullscreen request
    [23140:23167:0407/150336:ERROR:object_proxy.cc(624)] Failed to get name owner. Got org.freedesktop.DBus.Error.NameHasNoOwner: Could not get owner of name 'org.chromium.Mtpd': no such name
    [23140:23167:0407/150336:ERROR:object_proxy.cc(624)] Failed to get name owner. Got org.freedesktop.DBus.Error.NameHasNoOwner: Could not get owner of name 'org.chromium.Mtpd': no such name
    [23140:23197:0407/150336:ERROR:connection.cc(730)] sqlite error 19, errno -2: PRIMARY KEY must be unique
    [23140:23140:0407/150336:ERROR:object_proxy.cc(529)] Failed to call method: org.chromium.Mtpd.EnumerateStorages: object_path= /org/chromium/Mtpd: org.freedesktop.DBus.Error.ServiceUnknown: The name org.chromium.Mtpd was not provided by any .service files
    [23140:23140:0407/150337:ERROR:omnibox_view_gtk.cc(431)] Not implemented reached in virtual void OmniboxViewGtk::ApplyCaretVisibility()
    Window manager warning: Treating resize request of legacy application 0x1e00020 (Guake!) as a fullscreen request
    Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
    Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
    Fontconfig warning: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 78: saw unknown, expected number
    Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
    Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
    Fontconfig warning: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 78: saw unknown, expected number
    Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
    Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
    Fontconfig warning: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 78: saw unknown, expected number
    Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
    Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
    Fontconfig warning: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 78: saw unknown, expected number
    Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
    Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
    Fontconfig warning: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 78: saw unknown, expected number
    Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
    Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
    Fontconfig warning: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 78: saw unknown, expected number
    Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
    Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
    Fontconfig warning: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 78: saw unknown, expected number
    Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
    Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
    Fontconfig warning: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 78: saw unknown, expected number
    Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
    Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
    Fontconfig warning: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 78: saw unknown, expected number
    Window manager warning: Log level 16: Failed to load apps: Failed to look up menu_file for "gnomecc.menu"
    Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
    Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
    Window manager warning: Treating resize request of legacy application 0x1e00020 (Guake!) as a fullscreen request
    g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    ** Message: applet now removed from the notification area
    gnome-session[20009]: Gdk-WARNING: gnome-session: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    Window manager warning: Log level 16: gnome-shell: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    applet.py: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    (gnome-settings-daemon:20052): Gdk-WARNING **: gnome-settings-daemon: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    ** Message: NM disappeared
    guake: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    WARNING: could not use popup notification
    (nm-applet:20096): Gdk-WARNING **: nm-applet: Fatal IO error 104 (Connection reset by peer) on X server :0.
    What can I do to resolve this?
      Thank you very much!
    Last edited by UnsolvedCypher (2013-04-07 20:09:28)

    aliencam wrote:
    This has been happening to a lot of people lately (since the upgrade to gnome 3.8 from 3.6).  Many people haven't been able to find a solution, so they have installed the SLiM login manager and another desktop environment like xfce, enlightenment, or fluxbox for the time being.
    check out these other topics:
    https://bbs.archlinux.org/viewtopic.php?id=161900
    https://bbs.archlinux.org/viewtopic.php?id=161961
    https://bugs.archlinux.org/task/34893
    I still haven't been able to fix it on my computer, so I'm using SLiM and xfce while I wait for an upstream update.
    I'm currently using SLiM and Cinnamon since GDM won't work, but I was asking because I wanted my laptop to lock when I suspended it, which SLiM didn't do as far as I knew. Well, I guess I'll wait for an update. Thanks.
    Last edited by kkeller (2013-05-04 18:13:24)

  • GDM not starting and TTY1 not able to log in after GNOME 3.6 update?

    Hey everyone,
    I've been using arch for a couple of months now and all's been fine. I updated last week to gnome3.6 however and a lot of my system broke. I couldn't start any window managers or desktop environments at all. After reading about the initscripts deprecation I migrated completely to systemd and uninstalled initscripts, as per the wiki. This let me boot up, change to tty2 and start gnome with startx.
    Now my only problem is that GDM will not start on boot. The normal arch booting screen doesn't appear anymore and instead has been replaced by the following error:
    /dev/sda5: clean, 227778/2689904 files, 6575481/10749432 blocks
    (The numbers vary and sda5 is my root partition)
    I've tried different things like reinstalling the legacy ATI driver I'm using and running aticonfig again, messing with my .xinitrc file and making it executable for everyone.
    I'm lost, any help?
    Thanks.
    Last edited by rptynan (2012-11-11 19:45:25)

    I had enabled gdm during the migration between initscripts and systemd
    Here's the output:
    gdm.service - GNOME Display Manager
    Loaded: loaded (/usr/lib/systemd/system/gdm.service; enabled)
    Active: active (running) since Sun, 2012-11-11 17:42:36 GMT; 2h 8min ago
    Main PID: 259 (gdm-binary)
    CGroup: name=systemd:/system/gdm.service
    └ 259 /usr/sbin/gdm-binary

  • GDM not starting correctly after upgrade

    I just got around to upgrading my machine to the new /usr based Gnome and XFCE. Now, when GDM starts I get the error shown in this screenshot -- http://img136.imageshack.us/my.php?imag … estpn0.png. I've removed GDM and reinstalled it to no avail. Any suggestions as to how to fix this problem? I would like to have my themed GDM back.

    Make sure your themes are moved over to /usr/share/gdm/themes.
    mv /opt/gnome/share/gdm/themes/* /usr/share/gdm/themes/*
    I think this was the main thing but I also forced a reinstall of gdm and then restarted.  The restarting was accidental (telinit 0 ) but that might have also played some role.
    Good luck.

  • GDM cant start Gnome

    Hello all, I'm having a problem that just started recently with GDM.  When my computer boots, X and GDM start up fine.  Then I log in, and Gnome starts, but it crashes my whole machine. 
    The top and bottom bars for gnome show up, but thats all.  Then I cant click on anything, I cant switch back to the terminal (alt+f1) or ssh in from another machine.
    If I boot to a console, and use startx to start gnome-session, it starts fine.
    I have an ATI X700 card, using the open source 'radeon' driver.  I'm using the Beyond kernel.  I installed from the 0.8 alpha3 CD.  I have an AMD64 processor, but am running the x86 version of Arch.
    I did not see any errors in /var/log/Xorg.0.log  The warnings I saw were:
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (WW) RADEON: No matching Device section for instance (BusID PCI:1:0:1) found
    Also a bunch of:
    (WW) AIGLX: 3D driver claims to not support visual 0x23
    I'm kinda stumped on this one, anyone have any ideas?
    Thanks!

    Ok, my xorg.conf
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" #"CorePointer"
    InputDevice "Touchpad" "AlwaysCore"
    InputDevice "Keyboard0" "CoreKeyboard"
    Option "AIGLX" "true"
    EndSection
    Section "Files"
    RgbPath "/usr/share/X11/rgb"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/75dpi"
    FontPath "/usr/share/fonts/100dpi"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    Load "glx"
    Load "extmod"
    Load "xtrap"
    Load "record"
    Load "dbe"
    Load "dri"
    Load "freetype"
    Load "type1"
    Load "synaptics"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc104"
    Option "XkbLayout" "pl"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "InputDevice"
    Identifier "Touchpad"
    Driver "synaptics"
    Option "Device" "/dev/input/mouse0"
    Option "Protocol" "auto-dev"
    Option "LeftEdge" "1700"
    Option "RightEdge" "5300"
    Option "TopEdge" "1700"
    Option "BottomEdge" "4200"
    Option "FingerLow" "25"
    Option "FingerHigh" "30"
    Option "MaxTabTime" "180"
    Option "MaxTabMove" "220"
    Option "VertScrollDelta" "100"
    Option "MinSpeed" "0.06"
    Option "MaxSpeed" "0.12"
    Option "AccelFactor" "0.0010"
    Option "SHMConfig" "on"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
    ### [arg]: arg optional
    #Option "ShadowFB" # [<bool>]
    #Option "DefaultRefresh" # [<bool>]
    #Option "ModeSetClearScreen" # [<bool>]
    Identifier "Card0"
    Driver "radeon"
    VendorName "ATI Technologies Inc"
    BoardName "RS300M AGP [Radeon Mobility 9100IGP]"
    BusID "PCI:1:5:0"
    Option "XAANoOffscreenPixmaps" "true"
    Option "DRI" "true"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Section "DRI"
    Mode 0666
    EndSection
    Section "Extensions"
    Option "Composite" "Enable"
    EndSection
    And I have also enabled  AWT_TOOLKIT=MToolkit option in my .bashrc (for netbeans).
    Thanks for all help!

  • Thread.start() twice = different Thread instances

    Some tests seem to indicate that calling start() on the same thread instance twice won't work (no action...) even after waiting for the first run to end. This points to the need of creating a new thread instance before calling start() again. Can someone confirm the impossibility of creating two threads (even if not concurrent ones) from the same Thread instance ?
    Thanks.
    Nuno

    once u stop the thread there's no way it can be started again..the basic funda of threads..

  • Folder action starts twice

    This is wicked frustrating. All I'm creating is a simple automator action. It consists of 2 items - the "Run Shell Script" and a Growl Notification. In the shell script there is a single line to call a perl script.
    I saved this as a folder action, and every time I drop something into it everything runs twice. I see the growl notification twice as well as in a log file that is written by the perl script.
    The really frustrating part is that it was working 100% correctly, I removed an unnecessary "Get Specified Finder Items" step in the very beginning, and now it is doing this running twice thing. It still does it after I Time Machine restored back to the copy that was originally working. I have also right clicked the first action and told it to ignore input.
    I've tried deleting everything, deleting and disabling the folder action so I would be starting clean from scratch. I recreated the script and it's still running twice. A different folder action works fine.
    Any help is greatly appreciated. Thanks!
    Message was edited by: mcewen98

    At one point there were 2 copies, one called {name}.app and another just {name}. I'm not sure how that happened, but I fixed it before posting. There are 2 scripts in Library/Workflows/Applications/Folder Actions now, but they are named differently and are for 2 different things. The other one works fine.
    I think I may be on to something. If I remove the "run shell script" action, leaving only the growl action, save, and test, then the message is only displayed once. When I add the "run shell script" action (regardless of what the shell script actually runs - right now I'm only telling it to echo "test") I get the message twice.
    Also, whenver I test within Automator it works correctly. The problem only happens when I exit out and then drop something into the folder using the finder. I also checked the folder action configuration. There are 2 folders listed, the one having the problem has a single script. If I edit the script the path to the .app is correct. This is the file that I'm editing in Automator.
    Message was edited by: mcewen98

  • Firefox 3.6.10 update won't load on restart (tried many times) and exits after warning to restart again - how to disable warning so don't have to start twice every time I use Firefox?

    I regret agreeing to download Firefox 3.6.10 update, as it is somehow corrupted, and will not load when I restart. Subsequently, every time I start Firefox, it warns "Update Ready to Install", then when I don't restart (if I restart, it won't load) it exits, and I have to start Firefox a second time. Then it works without the warning, but when I exit and start Firefox again, the warning returns and the cycle repeats. This is such a nuisance I have gone back (reluctantly) to Explorer. Is there anyway for me to get rid of this corrupted update and go back to before I downloaded the fateful update?

    Your above posted system details show outdated plugin(s) with known security and stability risks.
    *Shockwave Flash 9.0 r999
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/
    In Firefox 3.6 and later versions you need the Next-Generation Java™ Plug-In present in Java 6 U10 and later (Linux: libnpjp2.so; Windows: npjp2.dll).
    http://java.com/en/download/faq/firefox_newplugin.xml
    See also http://java.sun.com/javase/6/webnotes/install/jre/manual-plugin-install-linux.html

  • Gnome panel started twice

    After my last system update, anytime i start gnome i get a message that basically says "panel is already running ..." How do i sort this out. Its nothing major just kinda annoying.
    Thanks.

    I found a workaround for the problem.
    Install xfce4-panel and xfce4-xfapplet-plugin and you will be able to run the gnome applets in the excellent and lightweight xfce4-panel.
    It works fine for me

  • Each song starting twice

    Since updating to itunes 8.02 whenever a song starts to plays it then starts a second time interferes with the original start and then the second start cuts out about 5 seconds later it even does it with new songs I add.
    It is most annoying as it does it with every single track, yet if I click it back to the start of the track it plays fine. Does anyone know what is happening I have set crossover back to 3 seconds. I just wondered if itunes 8 has a new setting that is interfering with the start of every track.

    You might have repeat turned on. To turn it of open up your music app and tap the two looping arrows on the left under your song progress meter until they turn white. If that dosent help you might just have to delete your playlist and then rebuild it.

  • Looking for a way to start twice an application

    I have a standalone application running on a Windows/XP platform.
    I'd like to prohibit a user to start this application if it is already running.
    Any suggestion will be be welcome (If possible, to be not OS dependent ).
    Gege

    Some applications try to avoid this by opening a server socket of a specific port, some hold a file lock ... Either solution has its drawbacks.

Maybe you are looking for