GDM login via command line?

The subject states my immediate question but for some back story I'm very close to building my ultimate NAS/HTPC server. I'm running Gnome Shell for the DE (including GDM, obviously) and XMBC for the HTPC application with the proprietary NVIDIA drivers. OS is running off a small SSD, with RAIDZ2 for the data.
What I need is a relatively simple way to control the GUI of the server, which is hooked up to my TV. I've been getting by with my Nexus 7 using x11vnc and "Yatse," which is an XMBC Android wifi remote. It's a bit clumsy, though, as I have to SSH in to start VNC, then VNC in to log in and start XBMC, then start Yatse to control XBMC. I know I can kind of do that with VNC, but Yatse has very cool integration with XBMC to the point you can browse your library directly in the app.
What I don't want is auto or passwordless login, since that ZFS RAID not only has video and audio files, but all of the rest of my data.
I discovered an Android app called "Remote Launcher" that will run pre-set commands on your Linux server (it also has WoL and can even integrate with Tasker). So now I'm thinking maybe with the right commands I can get Remote Launcher to log in to GDM, start and stop XMBC and Netflic Desktop, and power on and shutdown the server if necessary. The app's wiki already has the XBMC and reboot type commands, which aren't too tough in the first place. Which brings me back to the subject line, is there a command I can run on the server that will log the specified user in to the desktop? And once I'm logged in, if it's on the lock screen, is there a command to run to again log back in?

adamrights wrote:
Can you just run
sudo systemctl restart gdm.server
Do you mean gdm.service? Wouldn't that just reload the loginscreen? Or am I mistaken and that will somehow log me in?

Similar Messages

  • Enable auto login via command line

    Hi,
    I have an old Mac Mini (G4) running Leopard. My problem is that I cannot log in using Back to my Mac ( Screen Sharing ). I get as far as to the login window, but after login, the machine goes down ( crash completely ). I do not have the same problem with Intel-based Macs. I temporary solved this by activating automatic login. But after an upgrade of Leopard, the problem dissapaired - but after the last upgrade to 10.5.3 the problem is back - as the machine is in an other part of the country, and has no screen or keyboard - I was wondering if anyone can show me how to activate automatic login via the terminal, I have full access via SSH.

    In order for the "defaults write..." method to work, you will need an encrypted version of the user's password stored in /private/etc/kcpassword.
    This is automatically generated when Auto Login is set up via the standard Control Panel. If you don't have physical access, it could be copied from another machine to which you do have physical access and where the auto-logged-in user has the same password. Or it could be copied from any machine that already has the file and it contains the correct password.
    Alternately, there's some discussion of the encryption scheme used for kcpassword and theoretically, you could create the file from scratch. Check out: http://www.brock-family.org/gavin/perl/kcpassword.html

  • How can I install on Windows remotely via command line?

    Hello Folks.
    I want to install an application on Windows remotely and via command line, For example, I need a tool like Psexec or WMIC but I don't like the user understand it. Any idea? 

    Hi,
    Please also refer to following FAQ article and check if those four general ways will meet your requirement.
    [Forum FAQ] How to deploy applications remotely
    If any update, please feel free to let us know.
    Hope this helps.
    Best regards,
    Justin Gu
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • How to merge multiple documents via command line (Adobe Acrobat Pro 9.3.2)?

    I'm searching solutions to merge multiple documents (all stored in one folder) via command line or batch file to a single PDF-File...
    Is there a way to do this?
    Finaly I want to control this from a application written in MS-Access. So, perhaps there are some features already integrated in Access to do this?
    Thanks for answer!

    If you have some programming experience you could probably do this using VBA from within MS Access to control Acrobat via OLE.
    Lots of examples on the Web.
    Hope this helps

  • Adobe Reader 11 (XI) won't open file via command line

    Hello,
    I have posted this question to probably inapropriate topic earlier today, so I am repeating it again.
    I installed newest Adobe Reader XI today and when I tried to open certain pdf file via command line, it reported a syntax error. Now, this syntax worked so far on versions 9 and 10  (I checked today with them and it is working), so my question is - where can I find new syntax, if there is any? Googling didn't help. Or what else could wrong?
    In previous versions I was able to open pdf file (on page 5) like this (all was taken from Help file "Open parameters")
    "CompletePathToAdobeReader"/A"page=5""CompletePathToPDF",
    ie
    "C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe"/A"page=5""d:\V2\DataSheet.pdf"
    but now - not that it doesn't open specific page, but it doesn't want to open file at all.
    edit:
    Operating systems running: Windows 7, Windows XP
    Thank you.
    Message was edited by: v604

    Yes, it reported correctly becuase there is a syntax error in your command. Try spaces between the /A switch and open parameter. Try this:
    "C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe" /A "page=5" "d:\V2\DataSheet.pdf"
    Hope this helps.
    -Sumit

  • How to turn off Bluetooth adapter via command line or script?

    I'm trying to write a batch script that will be able to turn on/off any connected Bluetooth adapters.
    In the "Bluetooth Settings" window, how can I change the "Turn off Bluetooth adapter" setting via command line or script?
    Due to my account not being verified yet, I cannot post a screenshot.  I will update this thread as soon as my account is verified.

    get-service -DisplayName 'Bluetooth Support Service' | Stop-Service
    ¯\_(ツ)_/¯

  • How to change fcalias www via command line & particular port performance status

    how to change fcalias www via command line & particular port performance status

    how to change fcalias www via command line & particular port performance status

  • How do I get LR2 to "load from device" via command line?

    Hi,
    how do I get LR2 to "load from device" via command line?
    I've got XP to load LR2 when a "camera" (and only a camera) is connected but really cool would be if LR2 would also import the pictures.
    cu,
    Michael

    1. Make sure you are using IOS 7.
    2. Make sure your iPad is register in My Support Profile.
    https://supportprofile.apple.com/
    3. Try downloading again; it should be free.

  • [SOLVED] How to Crop an MP4 Video via Command-line?

    I have ffmpeg, mpg123, and mencoder. Does anyone know of a way I could use any of those to crop an mp4 video via command-line? I am trying to take off the black space above and below a video. Thanks in advance!
    Last edited by tony5429 (2009-04-12 00:12:57)

    I don't think it's possible to crop without re-encoding, but you can crop from the command line with ffmpeg and mencoder. Not sure about mpg123 - I think that's for playing audio but I could be wrong there.
    Anyway, with ffmpeg you can do cropping by using -croptop, -cropbottom, -cropleft, and -cropright. So if you wanted to crop 16 pixels off of the top and the bottom, your command line would look something like this:
    ffmpeg -i <input file> -croptop 16 -cropbottom 16 <video encoding options> <audio encoding options> <output file>
    With mencoder you use the "crop" video filter, like this:
    mencoder <input file> -o <output file> -vf crop=320:208:0:16 <other options>
    where the "320:208:0:16" means that the resulting picture is 320 pixels wide, 208 pixels high, and the 0:16 is the x,y position of the cropped area.
    These command lines are just really very basic examples - ffmpeg and mencoder have a LOT of options. Way too many to explain here. If you don't believe me, just try reading through the mencoder man page sometime. (There's an online version of it at: http://www.mplayerhq.hu/DOCS/man/en/mplayer.1.html)
    Hope this helps!!

  • Setting IIS W3C Extended Log File settings via command line, registry or configuration file

    I am currently in need of a way to set IIS W3C Extended Log File settings via command line, registry or configuration file.  More specifically the 'Bytes Sent (sc-bytes)' and 'Bytes Received (cs-bytes)' settings that are not enabled by default. 
    If anyone knows where I can locate these setting (outside of the GUI) for all IIS versions that would be greatly appreciated.

    I believe I have found a valid solution. You must have the WebAdministration module loaded.  I hope this helps someone.
    Use the following syntax to view current W3C fields:
    Get-WebConfiguration -filter system.applicationhost/sites/sitedefaults/logfile | select-object -expandProperty logExtFileFlags
    Use the following syntax to set W3C fields:
    Set-WebConfigurationProperty -Filter System.Applicationhost/Sites/SiteDefaults/logfile -Name LogExtFileFlags -Value "Date,Time,ClientIP,UserName,SiteName,ComputerName,ServerIP,Method,UriStem,UriQuery,HttpStatus,Win32Status,BytesSent,BytesRecv,TimeTaken,ServerPort,UserAgent,Cookie,Referer,ProtocolVersion,Host,HttpSubStatus"}

  • Turn on "Real-time preotection" via command line

    Hello!
    We have a cient without networking resources and I need to turn on the "Real-time protection" which is currently in OFF state.
    How can I do that via command line?
    I tried to review the "mpcmdrun" command but did not found proper switch to turning on this service.
    Regards, 
    Tamas

    You could do a regedit command to silently import a .reg file with the setting in it:
    create a .reg file from the following key:
    HKLM\SOFTWARE\Policies\Microsoft\Microsoft Antimalware\Real-Time Protection
    Name: DisableRealtimeMonitoring
    Type: REG_DWORD
    Data: 0
    Then import it silently with this command:
    regedit /s C:\ExamplePath\Example.reg
    You could also do a PowerShell command:
    Set-ItemProperty -Path 'HKLM:\SOFTWARE\Policies\Microsoft\Microsoft Antimalware\Real-Time Protection' -Name DisableRealtimeMonitoring -Value 0

  • How to see via command line blocked mails

    Im having a problem...i have a C100 Ironport appliance and i want to know via command line, how to grep and see mails that never went delivered.
    For example...i know that someone, like [email protected] send to my exchange server an email...but in exchange never entered. So i assume that it was filtered by Ironport.
    I go to the command line, use grep and 13 and search for [email protected] and i see something like this
    Wed Apr 18 14:17:54 2007 Info: MID 3977209 ICID 8813638 From: <pedro>
    Wed Apr 18 14:18:44 2007 Info: MID 3977209 ready 3019672 bytes from <pedro>
    I see that 2 mails came from pedro....so i want to see what happened to them...they were bounced? rejected? Delivered?
    I dont have any email in the local quarantine... and i want to know how to track what happened to those emails that never entered to my exchange server.
    Is there any command?
    Than you!

    Wanted to add that you can shortcut the "grep" process by putting everything on one line.
    grep -i "Mid 3977209" mail_logs
    grep -i "ICID 8813638" mail_logs
    grep -i "From: " mail_logs
    basically
    grep -i "pattern" mail_logs
    -i ===> ignore case
    Im having a problem...i have a C100 Ironport appliance and i want to know via command line, how to grep and see mails that never went delivered.
    For example...i know that someone, like [email protected] send to my exchange server an email...but in exchange never entered. So i assume that it was filtered by Ironport.
    I go to the command line, use grep and 13 and search for [email protected] and i see something like this
    Wed Apr 18 14:17:54 2007 Info: MID 3977209 ICID 8813638 From:
    Wed Apr 18 14:18:44 2007 Info: MID 3977209 ready 3019672 bytes from
    I see that 2 mails came from pedro....so i want to see what happened to them...they were bounced? rejected? Delivered?
    I dont have any email in the local quarantine... and i want to know how to track what happened to those emails that never entered to my exchange server.
    Is there any command?
    Than you!

  • How to install Developer Tools via command line

    Hello,
    is there a way, to install the Developer Tool via Command line?
    I need only the unix tools.
    I have to install the unix tools over a ssh connection.
    Thanks in advance and best regards
    Martin

    I followed the link you gave.  The only download I saw was for Xcode 4, and they either wanted $5 to purchase it from the app store or a 1 year mac developer license thing which was $100.
    <Edited by Host>

  • Can't rename the lap1041 hostname via command line

    We have lots of new lap1041 need be set static IP Adress, hostname, Controller Adress via command line, but when use command (capwap ap hostname) to set hostname , always give us cammand disabled, we used command:clear capwap private-config, but it does not work, why?

    Thanks for your reply.
    The Lap  is new and has not join the WLC( the WLC has not connect to the network), we can set the LAP IP address, Controller IP address via command line, but can not set host name, even though we power the lap via AC.
    LAP version 15.2(2)JA
    following is the error message:
    APacf2.c594.0137#capwap ap hostname test
    ERROR!!! Command is disabled.
    Further more, how to set the location?

  • Slow processing time, via Command line, with Reader

    I'm using Reader 9, via command line, to process PDFs in a 3rd party application and it's taking much longer to process files this way than with Acroplot or Ghostscript.  Is there a way to improve this processing time?
    thanks

    Ladies and gentlemen.....I have solved my problemo!
    The reason why the rest of the reports were getting the 'could not open file.' error was due to the fact that each discoverer instance launched was
    trying to access the same standard log file simultaneously.
    I modified each cmd file to write logging info to individual files: eg
    /logfile "H:\Projects\DRP Import Modelling\Automation\input2_log.txt"
    Now that's there's no contention with logging, the reports are firing off beautifully in parallel :)
    I am definitely having a beer this evening!
    Thanks for everyone's input...kept me on the righteous path :)

Maybe you are looking for