GDS 2.0 and changes to PI maps

Hi Everyone,
I am hoping that someone can help clear up some confusion. We currently use PI 7.11 and use graphical mappings for the transfer of data between R3 and GDS 1.0.  We are upgrading to GDS 2.0 in the next couple of weeks but need confirmation around the changes to PI. Are we still able to use our graphical mappings or do we need to update them all to Visual PI(?)
Does anyone know the answer?
Thanks very much

Hi Emma,
Year ago I upgraded to GDS2.0 from GDS1.0. In next few weeks we are going to upgrade to GDS2.1 as SAP is going to release for Ramp-Up customers.
In terms of XI mapping, it is different from GDS1.0 to GDS2.0 as it is from XSLT to Graphical mapping. We are using graphical mapping to transfer data from ECC and MDM to GDS. We could able to map all fields graphically without any issues. You can consider pre-defined content from SAP as part of GDS2.0 content(they provide very few fields mapping) and enhance according to your requirement.
You can contact me for any of the issues with MDM and GDS application and Mapping.
Thanks
Reddi Prathap Settipalli
Edited by: Reddi Settipalli on Apr 30, 2010 7:10 PM

Similar Messages

  • Catching (and changing) transparent tooltips maps is a pain.

    If i create a tooltip that's just acting as an image map, or helper, i don't want to have the rectangle shown. Wether i put the rectangle with color = none, or opactiy = 0, it's just becoming impossible to catch in my layout and change position.
    Since we don't have a mechanism as in inDesign to catch "next object" in a group, or a list of everything that's on a page (layer panel), i don't see a practical way to do this.

    With the latest version of Muse, you will see that the images used as the tooltip triggers and targets have changed and reconfigured. They no longer resemble the video http://tv.adobe.com/watch/muse-feature-tour/muse-define-trigger-and-target-interactions/ and function differently? I'm applying an image onto a target and trying to place these into position in my design. I cannot get the both as a group to show within states or disappear together ungrouped? I've tried pasting and inserting elements with no luck. I used these prior to the new version of Muse without difficulty unless made transparent and trying to relocate them which is next to impossible. Then I find the target area expands to a larger size than the image I'm using and again they will not disappear or reappear in unison. I can't find a way to figure these out as in paint me a picture cause I surely don't understand their functionality.

  • How do I change the default map to one that works. Apple maps nearly killed me today in Leicester as it tried to take me down 2 pedestrian areas, 1 no entry and told me to do a u turn about 6 times at no u turn junctions.

    Need to change default map on iphone. The default maps app is dangerous - it wanted to take me down pedestrian areas and through no entries whilst trying to navigate in Leicester. It needs to be removed from my phone as it is a hazard. I clicked on a link in an email and the maps app was opened and so I used it to navigate. Big mistake. This app is a serious hazard!

    I don't really want to get into a long debate here, but just to put in some background info. I travel a lot in the uk and have done for many years. For the last couple of years I have used either Nav free or waze as sat nav maps on my iphone. Whilst there has been some errors, they have been useable - and of course you have to use your common sense whilst using them.
    On this occasion someone emailed an address to me in Leicester. I wanted to drive from on point in Leicester to this address that has been emailed to me. I clicked on the address in the email and it defaulted to the apple maps and plotted a route. It was about 1 mile away and told me it would take about 8 mins.
    This was the worse journey I have experienced with a 'sat nav' - it tried to take me through 2 pedestrian areas and 1 no entry in that short journey. Clearly I didn't go I. The pedestrian areas or turn into the one way. However, the apple. Aps persisted to try and make me take these route, and I. The process kept urging me to take a u turn where it was clearly sign posted that it was illegal to do so.
    In the end, I pulled over and switched to Waze - it directed me straight to my destination without any errors.
    The point is, I am not talking about a mistake in the middle of no where. This is a major city in the UK - and fairly central ie near the city centre.
    Generally I love Apple products and don't knock them as a company.
    The original question was genuine- can I change the default mapping app so that I don't end up using the apple maps app again. It was a disaster like nothing I have seen before.
    I now know that the answer is no.
    Apple clearly need to sort this out.

  • [svn:osmf:] 13042: Fix for FM-287, reinstating the main sample ( that uses serial and parallel composition), and making another pass at  getting all the changed trait methods mapped correctly back- and forth between JS and Flash .

    Revision: 13042
    Revision: 13042
    Author:   [email protected]
    Date:     2009-12-17 03:45:27 -0800 (Thu, 17 Dec 2009)
    Log Message:
    Fix for FM-287, reinstating the main sample (that uses serial and parallel composition), and making another pass at  getting all the changed trait methods mapped correctly back- and forth between JS and Flash.
    Ticket Links:
        http://bugs.adobe.com/jira/browse/FM-287
    Modified Paths:
        osmf/trunk/apps/samples/framework/HTMLGatewaySample/HTMLGatewaySample.as
        osmf/trunk/apps/samples/framework/HTMLGatewaySample/html-template/index.template.html
        osmf/trunk/framework/MediaFramework/org/osmf/external/HTMLElement.as
        osmf/trunk/framework/MediaFramework/org/osmf/gateways/HTMLGateway.as

    Perre wrote:I'm used to being able to pick one or a couple of songs and then adding it a specified playlist. Is this impossible in sonata?
    It's clearly not impossible, just different than you expect. Create your playlist as you want it to appear in the Current tab (meaning don't dump every single song from your library in there, just the ones you want) and then save the playlist.
    Perre wrote:And if I try to play the m3u file created (the one with every song listed) through freevo I get a message that the directory is empty. What am I doing wrong??
    Look at save_absolute_paths_in_playlists in your mpd.conf.

  • Need detailed info about Active,New and Change log table in BI 7.0

    Dear Experts,
    I am new to this technology. Can you any one explain in very detail about ACTIVE, NEW and CHANGE LOG tables workflows.
    And also i am requesting you all to give tips to how to study BI 7.0
    Regards,
    Ameer.N

    For your first problem solution is this note: 936644
    You might have not mapped the filed in your tarnsfer/update rules?

  • I am creating an aperture book from my photos. How do I change the default map provided in the theme to one of my choice e.g. satellite view?

    I am creating an aperture book from my photos. How do I change the default map provided in the theme to one of my choice e.g. satellite view?

    Kyle,
    Thanks for your response. To be clear, the way I am importing the PDF is by going to New in LiveCycle, and selecting Import a PDF document, and selecting Create and Interactive Form with Fixed Pages.
    I cannot change the forms or pages, as they are created by our local Board. In otherwords, I have tryed used the flowable content, and upon import, not only are the fonts slightly different, but all the important artwork (trade-related) is gone, and is not in the exact positions it was in. The forms must meet the standards to which they were approved by the regional board, and there are state-mandated forms as well.
    What surprises me is that you say this method of Fixed Content isn't used much any more. I would think that a lot of people would have PDF files they would wish to make into fillable, interactive forms without needing to reconstruct the entire document. Perhaps a company that has always done things on paper, and now wishes to use those exact same forms on the computer, with no deviations to looks so they can be printed and match up perfectly.
    I thought about using Acrobat's internal form creation system. However, some of these forms have sophisticated options and the calculation scripts and systems within LiveCycle are very useful. Not to mention that it has a much larger scalability, should we chose to utilize it.
    Any other suggestions? I am so confused why Adobe would force medium-quality import of a PDF, but be so incredibly flexible about every other option in their program.

  • When I assign an address from google map to my contact, my contact pictures changes to a map. How do I prevent that from happening??? thanks

    When I assign an address from google map to my contact, my contact pictures changes to a map. How do I prevent that from happening??? thanks

    It isn't. Forward it to [email protected] and then delete it.
    (109195)

  • Urgent: Extraction of CRM Survey  and change documents

    Hi BW Experts,
    My requirement is to extract CRM Survey which is linked to Activities as XML file and Change documents from CRM to BW. I know what are the datasources we need to use inorder to extract the Survey data to BW some of them are : 0SVY_DATA_1;0SVY_QUEST_TEXT and 0SVY_ANSWER_TEXT but I am confused in mapping Survey questions to BW as they may be of 200 char do we need to split them or is there anyother way we can map please would anyone suggest me steps to extract the Survey data from CRM to BW i.e from activation to Cube mainly I am worried about how do we map Survey questions to BW objects.
    And also I need to extract Change documents,i.e changes made to the created opportunity,activity transactions, from CRM to BW as the changes are not stored in DB tables but we can view them in extras menu->change documents I think they are linked to transaction number but i donot know how to pull them to BW.Would anyone put some light on it. I appreciate it in advance.
    Thanks in advance
    Regards
    Kishore.

    Hi Kishore,
    I have no experience in CRM extraction in BW.
    Did you try to use 'Propose Transfer Rules' function to map objects from extract structure to the comm structure. I am assuming that you have activated all the required Business Content and replicated your extract structures.
    Why do you want to map field by field? May be I did not understand your question?

  • While I change the base map I can't see other themes????

    Hi,
    I use mapviewer for rendering maps, which consist of a base map and some additional themes.
    I have a set of base maps (entered in the oracle db) and I'm implementing the functionality of changing the base map, but with the condition that the other themes added above the base map should remain.
    The problem that I'm facing is that the basemap changes, but I can't see the other themes.
    Following is my code:
    public void doChangeBaseMap(String newMap)
    String[] enabledThemes = mv.getEnabledThemes();
    mv.setAllThemesEnabled(false); //temporarily disable all themes
    mv.setBaseMapName(newMap);
    try{
    mv.run();
    catch(Exception ex)
    System.out.println("error msg (runMap()): "+ ex.getMessage());
    //simply re-enable all themes
    mv.enableThemes(enabledThemes);
    Any help please?
    Best Regards
    evanelapi
    Message was edited by:
    [email protected]

    Hi,
    currently the method run will render the themes again, but it will use some caching based on how the caching is set to the theme. The default mode is caching="normal", in which not necessarily all features are on the cache at the same time. You can also use caching="all" and in this case all features will be loaded into memory, improving the performance for the next requests.
    The next version of MapViewer will come up with some nice new features, and you will have the option to cache the basemaps, resulting on a much better performance as it will not render the basemap themes again.
    Joao

  • Changing WSDL deault mapping thro' VB Client

    Hello,
    I am using VB 6.0 Client with JAVA Web Service (J2EE). VB does not put the data type in the SOAP message just like Apache SOAP and all others do. Can someone please tell me how to make the VB Client mention the data type explicitly by changing the default mapping. I know there is a way out for this. Right now I am using anyType in WSDL file for the string data type and making it work but i need the VB Client take care of this.
    Help from you all in this regards would be highly appreciated. Waiting to hear from you.
    Thanks,
    Snehal Shinde.

    The alternative is to turn on untyped support in OC4J - this feature just came available in the OC4J 9.0.4 preview:
    http://otn.oracle.com/tech/java/oc4j/904/content_preview.html
    The doc for the untyped support is at:
    http://otn.oracle.com/tech/java/oc4j/904/doc_library/webservices-devguide-904-preview.pdf
    on page 315.
    If you already have a deployed web service or are not using the Web services assembler (which is what the doc refers to), simply add the following 3 lines to your web.xml:
    <init-param>
    <param-name>accept-untyped-request</param-name>
    <param-value>true</param-value>
    </init-param>
    after the other init-param tags that will be in the web.xml following the setting for the type of Web service you are deploying.
    Be aware, untyped support in the preview has a bug logged against it that it only supports untyped primitives, not arrays that have untyped elements. It will be fixed in 9.0.4 production.
    Mike.

  • How can I change the default map on journal?

    How can I change the default map on iPhoto journal to the correct one?

    I would advise you to not do that; but, if you do, please read this first and understand:
    http://www.jklstudios.com/misc/osxfonts.html

  • How to resize and change the resolution of a batch of photos using Automator

    I searched for a long time tonight looking for the answer to this (seemingly) simple question:
    How do I use Automator to scale and change the resolution of a batch of images?
    It was not so simple.
    Links to this question:
    https://discussions.apple.com/message/12341246#12341246
    https://discussions.apple.com/message/12342026#12342026
    https://discussions.apple.com/message/5785047#5785047
    https://discussions.apple.com/message/1173358#1173358
    https://discussions.apple.com/message/5641853#5641853
    https://discussions.apple.com/message/3207516#3207516
    These are just the links on this site - I found them all over the place at MacRumors, Apple Tips, Mac Help, etc.
    You can actually manage this in Automator.
    Here are the steps that worked for me:
    Create an Automator APPLICATION - not a workflow (this is due to the way that I'm batch converting images - workflows might be ok for some cases)
    Step 1 is Copy Finder Items
    My flow inserts an SD card, opens the DCIM folder that my Nikon creates, selecting the images that I click (command + click to multi-select) and once I have the photos highlighted, I drag them onto this Automator App we're creating.
    <==  You'll have this guy soon!
    As a result - I want to copy the originals to my computer as step 1.  I don't touch the originals on the SD card (and cards are cheap so I tend to leave them on the cards as well)
    Step 2 is the Scale Images action - you can search the library for this and find it quickly.  For my part, I found that scaling images to about 38.8 percent of their size on the SD card is good for uploading to a blog.  Change this value to whatever you wish.
    Step 3 is Run Shell Script - and here is where we marry the brilliance found at this link with our script.If you have a hard time reading the text in the image, it is as follows:
    #bin/bash
    for f in "$@"
    do
         /usr/bin/sips -s dpiHeight 72.0 -s dpiWidth 72.0 $f
    done
    Save this application (I named mine "Format Photos")
    Place the application inside the target folder where you want the images to end up.  I do this because when I have the SD card window open, I can also open my "Photos" window and see my App sitting there.  I select my images as I mentioned and drag them on top of this app.  The app copies the originals and the conversions into the folder.
    NOTES: When you open a converted pic in Preview, you will see Resolution = 300 dpi if you go to Tools --> Adjust Size...  This reading is explained by another brilliant discussion as sips only touches the JFIF properties inside the file's MetaData.  However, if you look at the bottom of the Adjust Size... window, you'll see the image size is probably around 500 kb (give or take depending on the original).  My goal was to get the images down from the 3.0 MB I shoot at to around 500 kb.  Therefore even though the MetaData still thinks that it is 300 DPI according to Preview, it has been changed to 72 (open it in some other applications mentioned at the links and you'll find different readings - it all depends on what the application reads from the Meta).
    This does not rename the files, so you'll get DSC_1000.jpg and DSC_1000 copy.jpg in all likelihood.  If that annoys you, add a step into the Automator Application that renames the file after the "Run Shell Script" action has run, and you can have each file renamed according to some convention that you like.
    This took a heck of a lot longer than I expected - so I decided to put in the effort to share this with the community and save others the hassle. 

    PPI is pixels per inch of the image.  It is difficult to increase resolution as you are trying to add data that is not there.
    But for printing purposes what you want is dpi or dots per inch.
    The image processor either accessed from Bridge (tools/photoshp) or PS is a good way to change a batch of images.

  • We have an itunes account on our desktop and my kids have it on their ipod and iphone. I went in and changed our user name from my old e-mail address which is no longer accessible to my new one and now either of my kids can access the itunes store..

    We have an itunes account on our desktop and both my kids have it on iphone and ipod. I went in and changed out user name from an old e-mail address which is no longer accessible to my one I use now... When the kids try to sign onto the itunes store it tells them they have the wrong user name..
    Can this be fixed??

    Did you change the email address or create a new Apple ID?
    If the email address associated with the account was merely changed, sign out of the Apple ID on the devices and sign in using the new credentials.

  • If someone has wiped my ipad and changed passwords on icloud how do i get my data back

    if someone has wiped my ipad and changed passwords on icloud how do i get my data back? please could someone help me out thanks

    How did they wipe it?  By using Find My iPad and performing a wipe?  If so, that means they have your icloud ID and password, not a good thing.
    You could try connecting it to iTunes and performing a restore from iCloud.  But if they changed password, then you are out of the loop.  How did they get your password in order to change it?

  • I've just received an email from 'Apple' saying that my apple id was used      to sign into iCloud on an iphone 5s.  I have an iphone 4.  It's asking me to sign in to confirm my details and change my password.  How do I know if this email is genuine?

    I've just received an email from 'Apple' saying that my apple id was used to sign into iCloud on an iphone 5S.  I have an iphone 4.  It then asks that I 'click here' to confirm my details and change my password.  How do I tell if the email is genuine?

    Apple will not ask you to click a link in an email. They may tell you to log in to your account to reset your password. Go to https://appleid.apple.com and log in if you ever want to change any information in your profile (or your password). And do not click the link I just posted; instead enter it into a browser.
    You can verify the devices assigned to your account by going to https://icloud.com/find (again, don't click it), where you can see a list of devices registered to your Apple ID.
    As a general rule, you should never click a link in an email or forum post without verifying it first. You can see where it goes without clicking it in most email programs and browsers by hovering your mouse pointer over it. On an iPhone you can check where it goes by holding your finger on the link (rather than just tapping it).

Maybe you are looking for