GE 31591 Phone - caught between Skype and GE_conti...
I bought a GE 31591 Phone with Amazon. Phone worked perfectly since February 2012. Contact list simply disappeared from the phone weeks ago. However, I logged in with my wife account and her contact list was there! A subscriber called EbuyNow_PRO started to try to solve my problem and afterwards they gave up.
This message is to Skype. My phone doesn´t have hardware problem. My ACCOUNT (not my phone) has a problem with Skype system. Skype, I want a solution to my problem!
Dear Readers and utonium01,
Please accept my apologies. I am not an autobot, and have been known to err as indeed I am only human. Copy and paste and switching between various open tabs in my internet browser was the culprit.
My enquiry, above, still stands -- as I am continuing to diagnose and assist in resolving issues with this phone set.
Warm regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!
Similar Messages
-
Signal to phone varies between 4G and 1X. Can that be improved without using antennae.
Signal strength varies from 4G to 1X, is there an adjustment in the phone to correct or is it necessary to buy xtra antennae.
Thank you for replying.
Signal varies in 61822 and 33917 zip codes. The incline plane emblem next
to battery icon never shows strength greater than just the tip of the
indicator except when I go to Verizon corporate store where they have a
booster. It happens in and out doors. I have not removed the sim card. This
is a Motorola RAZR M with a number on back - CEO 168
[image: Verizon Wireless
Community]<http://community.verizonwireless.com>
<http://www.verizonwireless.com/b2c/index.html>
<http://www.verizonwireless.com/b2c/explore>
<http://www.verizonwireless.com/b2c/store/controller?item=phoneFirst&action=viewShopIndex>
<https://wbillpay.verizonwireless.com/vzw/nos/topline.jsp>
<http://support.verizonwireless.com/clc/> Re:
Signal to phone varies between 4G and 1X. Can that be improved without
using antennae. created by Verizon Wireless Customer
Support<https://community.verizonwireless.com/people/vzw_customer_support>in
Android - View the full
discussion<https://community.verizonwireless.com/message/1026021#1026021> -
How can I swap phone numbers between Verizon and T-Mobile phones?
I have Verizon and T-Mobile phones. My wife uses the T-mobile phone and I the Verzion phone. I was given a GSM iPhone 5 that I want to use on the T-mobile account, so I want to move the Verzion phone number to the T-Mobile phone and the T-Mobile number to the Verzion phone. I do not want to have to inform all our friends about the number swap. I also would like to maintain phones on different networks for reliability and connectivity assurance.
I called the Verizon wireless number and the person couldn't help me. The best I can figure out is to give up on Verizon and move the Verizon phone number to a new T-mobile account.
Any ideas?They are both 4g phones correct? All verizon phones come unlocked. If the verizon phone works with tmobile all you do is take the sim card out and stick it in the phone. however when you do this it is going to erase everything on the phone so make sure you back it up before swaping sim. As far as using the tmobile phone with verizon you would need to ask tmobile if the phone is unlocked
-
I'm trying to make links to show and then play a few
slideshows. I have multiple layers in DW that show or hide
depending on which selection is made on the menu bar. The problem
is that I wanted the text on each "page" (layer) to slide in
horizontally, and I wanted the non-standard font to be embedded, so
I used Flash which I put in the layers instead of plain text. What
I need to be able to do is somehow make the text that is in the
Flash activate the layer that holds the slideshow. I tried making
the text a hyperlink while in Flash, but it only opens a new
browser instance with the slideshow in it. I know that's because of
the _blank option as target, but I tried typing in the name on the
layer as the target and it didn't work. I feel like I'm stuck
between two programs. I know that if I was really good I could make
an entire site out of Flash, but I've got a long way to go before I
can do that and I need to get this site at least functioning in a
week. Please help! The site, as I have it so far, is at
www.brickley.org. If you go there you can see what I'm referring to
by clicking on the "gallery" link on the menu bar.
Thanks,
DavidDavid,
Sounds like you are over complicating your layout. I
understand you really would love to have a Flashy site. But, from
my limited experience integrating Flash into Dreamweaver, you are
using it in a way that will not work. I have designed a site in
Flash, for the purpose of animated text fields and all of the
bell's and whistles. Learning Flash like everything else, is a
learning curve. But, your layout is very simple, and with a good
tutorial you could design your site in Flash very easily. But there
are so many negatives to making your site a "Flash site", that I
personally wouldn't recommend it. Have you read up on Fireworks? I
really only use the program to optimize graphics. From my limited
experience with the program on a deeper level, I do believe it does
animate text. But, I don't know if it will let you do the show /
hide layers behavior in dreamweaver.
Here is my two cents. Get your site up styling with CSS, and
then worry about the heavier programing when you can sit with some
tutorials and sort it out. I really don't think the animated text
fields will make or break the design of your site. -
Testting silk codec between skype and lync.
After provisioning of Microsoft Lync Server and Skype Connectivity. which codec they are use? we want to test silk codec for our new recorder software programs. If lyc and skype will use silk codec it good news. could you please help us?
Hi,
Here is a good comment in the link below may help you understand the concept easily:
http://social.technet.microsoft.com/Forums/en-US/c9d14322-e1b5-4088-a225-46610bf0356b/lync-codecs?forum=ocscapacityplanning
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
Privacy in linked Skype and Hotmail/Messenger/Outl...
An ex boyfriend managed to get access to my Hotmail account and he has seen my skype conversations, but I do not know how far back in history he could access.
There was no option to delete skype history within the Hotmail account I had tried many times to get rid of them in the Hotmail reading pane.
I have now managed to unlink the two which has removed it. I have also been into skype and removed the link.
Within the skype platform,it was set it to never save history and to be doubly safe I always manually deleted history. However it kept appearing in hotmail messenger reading pane.
I have two questions that I hope someone can help me with:
1. If he got access to my hotmail again can he switch on the link between skype and messenger and therfore gain access into my skype history
2. Please could someone out there check their own linked account in hotmail/outlook and tell me how long the skype history goes back for. is it months or years? I unlinked them in haste and now I cant tell the extent of the situation
Many thanks I look forward to hearing from youHello,
Sorry to hear that - such type of situations are not nice.
I have linked my accounts; but the chat history is all the time only with skype - meaning - it is not enabled in Outlook - http://community.skype.com/t5/Live-Messenger/How-to-access-chat-history/td-p/1358453
Just to make sure - I would suggest to really and check your other accounts and ensure that you change your password (and choose a good password) - the whole idea is that access to your information should be accessible to you AND only you
Cheers
Jo -
SKYPE and Cordless Phone (gephones) 31591 VOICE Er...
Please there is some one Help Me,
I Have Installed Cordless Phone GE 31591, Phone OK.
But I Have Some Problem when i try to Call With SKYPE, I Can Call, but can't hear the Voice from the Headset..hi there,
im also experiencing the same problem with this phone,
when people call me i can have a normal conversation for 10 seconds, and after that
i cant hear a thing, but the person who are calling me can still hear my voice, but i cant hear them.
tried reeting and update, but it doesnt fix the problem. its very annoying -
Sign In failure to Skype with GE 31591 phone
Try as I might my recently purchased GE 31591 phone won't sign into Skype. Can anyone help? Neither Skype nor GE can. Each claims it's the other's problem. Bush league!
Hi sohoaudio,
I have checked our eBuyNow Support centre and found your support ticket FYYELY which have been replied and will continue assisting you until the issue has been solved.
Please be assured that your GE Phone is covered under a 12 month warranty and if the unit is deemed as defective, eBuyNow will reship them a new unit at no cost.
Some Skype users have been solved the same issue visiting: secure.skype.com and updating profile information by populating "Gender" and "Birthday" fields and then try signing in again.
If you already went over the above and are still unable to sign in, please contact us back via your support ticket and one of our agents will gladly assist you.
Best,
eBuyNow.Support.Pro -
How can I restrict the usage of a iPhone 5c? I would only like my daughter to be able to use her phone between 7am and 10pm central. Any ideas how to do this or an app to use?
Hi! i believe there is no preinstalled app than can do that for you, however you can use a third party software, such as this: http://www.bitworks-engineering.co.uk/Apps/TimeLock_App/Welcome.html or this https://itunes.apple.com/us/app/parental-timelock-time-limit/id689577280?mt=8
-
I need help syncing my contacts between Outlook and iPhone using iTunes. I used the knowldge document and set it up to transfer my Outlook contacts to the iphone using itunes.
In contacts on the iphone I only see the email addresses.
Yet in Outlook I have email, snail mail and phone numbers.
I followed the knowledge document from iphone.
I did it once, didn't work so deleted all the contacts from the phone and tried again. Same result. I have a PC using Windows 7 64 bit.You can't access an Exchange account via ActiveSync with the Address Book and iCal on your Mac.
You can access a MM account with Outlook on your PC at work and keep your MM email account server stored mailboxes synced between your PC at work, your iPhone, and the MM "cloud". Not sure about syncing MM contact info and calendar events with Outlook at the same time with an Exchange account.
This will not provide for syncing your Exchange account contact info and calendar events with the Addresss Book and iCal on your Mac because the accounts are separate.
You can access an Exchange account and a MM account at the same time with the iPhone's mail client, and sync contact info and calendar events over the air with both accounts at the same time. You can view combined contact info or separately for each account, and the same for calendar events. -
iPhone 4 - - I was trying out the Alarm 4 free app. I set the alarm for 2 minutes into the future for a test. After one minute my phone naturally went to auto-lock and into sleep mode. At approximately the time the alarm should have activated I noticed my iPhone 4 alternating between a blank screen with the apple logo to the passcode screen. The passcode screen is only visible for a short moment so I am unable to attempt to input my passcode.
I tride a normal shutdown and the "hard" shutdown. The shutdowns work OK but when the phone comes back up it returns to the blank screen with apple logo & passcode screen loop.
The interesting part - - I plugged in a headset and the phone works normal! Unplug the headset and the phone returns to the "loop".
BTW - yes I did remove the Alarm 4 application!
I also turned off the auto-lock feature. With the auto-lock off the phone loops between the blank w/apple logo screen and my home/slide-to-unlock page.
So - - - as long as I leave the headset plugged in the phone works normal. If I remove the headset my phone reverts back to the "loop".
Any ideas?As a matter of fact I DID get my phone to work. "Google" the term "recovery mode for iphones".
You'll find lots of hits.
Here is an example -
http://www.tipb.com/2009/01/29/iphone-101-put-iphone-recovery-mode/
There are a few different explanations throughout the Google-world. Some are better explained than others.
Bottomline - it worked!!!!
Be advised the Recovery Mode is truly a last ditch effort. In essence you will completely wipe your phone of everything and "recover" it to straight-out-of-the-box. Be warned!
Good luck! -
What exactly can iSync to for me between mac and phone?
I want to test out my new KRZR K1m with iSync, but I do not want it to wipe out all of my contacts. My service provider is verizon, and they uploaded all my contacts from my old phone to my new KRZR K1m. Since I never sync'd the old cellphone w/ a computer, I do not want to accidentally delete everything on my phone by replacing it w/ my addressbook just yet.
but really, I just want to know what can by transferred via bluetooth between my mac and the KRZR?
can I transfer songs? pictures/video?
what kinds of things can iSync do for me and what is the best way to go about it without accidentally erasing the KRZR's phone contacts?
thank youYou don't have to worry about erasing all of your contacts. If you haven't synced the phone before, open iSync and click the "Sync" button in the main window. (It's the iSync logo to the right.)
Once you click sync, iSync looks for bluetooth devices and/or USB devices (phones, PDAs, etc.) Once it has found your device, it will display it to the left of the iSync window. Click on it and you'll see a bunch of options including, "For First Sync". There is a dropdown menu next to this with two options:
1. Merge data on computer and device
or....
2. Erase data on device then sync.
Obviously in your case you would choose numero uno...
iSync will then add all of your phone numbers on the phone to your Mac Address Book and will sync your existing Address Book contacts to the phone. -
Is it possible to record parts of a phone call on Skype into Logic, then play back the audio while still on the Skype call? I'm a voice teacher coaching students in other cities, and Skype can't offer any suggestions.
Hi
What I'm saying is:
Make a new MONO audio track (use the + button). Assign it to input 1
Make a second new MONO track, assign it to input 2
Name both tracks, record-enable both tracks, and record.
You could, of course, make both tracks in one go via the new track dialog box, and hav ethem automatically assigned to ascending inputs.
CCT -
How do I transfer ring tones between ipad and non-apple phone using bluetooth
Can I transfer ring tones between ipad and non-apple phone using bluetooth?
No. iOS devices do not support file transfers between non-iOS devices over Bluetooth.
They probably wouldn't work anyway, as iOS ringtones have to be in a specific format. -
What is the difference between Firefox and Firefox os, and what one is better for the Samsung galaxy s3 mini, Please could you recommend which one is the best and most suitable for my phone please. Many thanks Michelle Petch
Thank you for your question.
Firefox is basically a browser.And Firefox OS is an Operating System.You can install Firefox in your SGS3 just like an android application.But if you want Firefox operating system on it. then you have to flash the ported Firefox OS on your device. Then it will be a completely different standalone operating system.you cannot install android applications on it.
To read more technical difference read:
Firefox OS:
http://en.wikipedia.org/wiki/Firefox_OS
Firefox Browser:
http://en.wikipedia.org/wiki/Firefox
Hope this clears your query.Thank you
Maybe you are looking for
-
NSTabView - selector not recognized using selectLastTabViewItem and friends
Hi, I'm new to Xcode, Cocoa, and Objective-C (not new to development though). I am using Xcode 2.4.1 on OS X 10.4.11. I've gotten on pretty well doing general stuff with most of the widgets, but I'm hung up trying to do something (commonplace) with t
-
My LAPD & kerboros service is stopped and workgroup manager is not working either
Hi I had to restore from a back up a while ago but the workgroup manager seems to have lost all of the passwords and the LAPD & kerboros service wont start in th open directory mater. I have been told that if I make the opendirectory master a stanalo
-
Signature status for just submitting signature and yet to validate the email
Hi, I need to get a specific signature status for just submitting signature and yet to validate the email. I need to restrict the user to submit my web form with out signing in the widget. So here, while submitting the form, Im fetching the signature
-
How to create report from Oracle Forms 9i chart?
Hi all, I am new to Forms and Reports 9i. I need to create a chart (let's say it contains customer name on axis X and total sales for this customer on axis Y). Is it possible to get report with details for particular customer by clicking on the chart
-
Image Capture can't save to Network Server
I have a Canon MX860 connected via wireless to my network. I'm running 10.6.6 on the mac. When I scan an image, Image Capture only allows to save to the local hard drive. It shows my Network Server (in the Scan To | Other ... dialog box), but it's gr