GE 70 notebook with USB port upside down.

My new GE70 notebook has one of the USB 2.0 ports installed upside down, it's on the right side near the VGA port. All my other USB connections ((USB .0 and 3.0) are installed correctly, but with this one USB port I have to install my device upside down. Is this unusual? I've never seen this before.
It's not really a problem it's just that I can't see the indicator light on my connector.
What's up with this?
Thanks.

Okay, I think I answered my own question.
I went to the MSI site and looked at the side view of the GE 70, and sure enough, the USB port near the VGA port is upside down. That seems to be the way they're designed.
So thanks for any help that you may have been thinking of giving me

Similar Messages

  • Print not response when i connect T1100 Epson to router RT-N16 ASUS with USB port???

    For my macbook pro that I brought July 2010. I can print with T1100 Epson printer connect directly to my mac but when I connect T1100 to ASUS Router RT-N16 with USB port and I assign print to T1100 pass through wireless It's not response. How do we do please ???
    Many Thanks for your answer...

    Hello Shawnondrums,
    Welcome to the HP Forums.
    I see that you are having an issue with the printer shutting down when attempting to connect to the wireless network.
    A very important step that gets easily over looked is, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    Once the printer is back on, please use the on/off button to do a proper shut down and restart.  This will also do a semi power reset on the printer.
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • How can i connect  apple hd cinema display 30-inch DVI to my new notebook with HDMI port

    I have ask this question in the local shop but they could not answer me - how can i connect  apple hd cinema display 30-inch DVI to my new notebook with HDMI port

    I wasn't sure how the whole thing would have work but it seems thunderbolt also acts like mini display port. Thats sweet. I can now haply continue using my 30 inch apple display.
    Thanks.

  • HT1688 I have a honda civic with USB port which allows play back of my old iPhone 4 and 4s.  With the new iPhone 5 the radio shows the phone is conected but does not show any music content.

    I have a honda civic with USB port which allows play back of my old iPhone 4 and 4s.  With the new iPhone 5 the radio shows the phone is conected but does not show any music content.  Any Suggestions?

    You should be syncing your contacts with an app on your computer or cloud service (iCloud, Gmail, Yahoo, etc), and not relying on a backup.  If you haven't been doing this, start now and then restore your old backup.  You will then be able to sync the new contacts back into the phone.  However, you will lose all messages, etc newer thant the backup.

  • My iphone5 wont charge with usb port but works fine with wall plug... Infact computer. Doesn't recognizes the iphone

    Battery not charging with usb port but works fine with wall plug.. So the prob is computer is not detecting the iphone5 . This problem started after upgrading to 6.1.3 version

    Try to see what happens on another computer. If it works on another computer, the issue is not at the iPhone.

  • I got an Ipod shuffle because I have two cars with USB port for mp3. It doesn't work. Can it ever?

    I got an Ipod shuffle because I have two cars with USB port for mp3. It doesn't work. Can it ever?

    im not shure but if you get an 3.5 mm sterio headphone jack and plug that in your car and shuffle it should work just as good

  • Is it safe to use the Belkin power strip with USB ports to charge my iPad? Or is the iPad USB adapter the safest route to take when traveling with device?

    Is it safe to use the Belkin power strip with USB ports to charge my iPad?
    Or is it better to travel with the Wall Charger provided with iPad?
    Concerned about safety of the device. Thanks for your thoughts.

    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • My laptop macbook pro has a problem with usb port they are not working.

    hi there i have a late 2011 mac pro, its been 2 years of purhase however reary used, now it has a problem with usb port are drawing too much power and usb ports are dissabled from the system. now i can not use usb ports. do yo have solution for it??? cheers

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • Itunes7 not responding with a mobile connected with usb port

    Hello,
    I try to listen music connecting a nokia n91 (hard disk 4gbyte) with the usb port and itunes7.
    often itunes7 crashes (not responding status) and even I shut down the program, then it stops again, and again, and again..
    Obviously with the previous version of itunes I had NO PROBLEMS!!
    it seem that the version 7 has not been tested enough..
    regards,
    dave from italy

    If it boots from the enlosure then I agree with Shootist in that it's more than likely that there's a problem with your SATA cable. Call or contact OWC and tell them the problem that you're having with their drive. They may just ship you a cable free.
    Clinton

  • Problem with USB port in HP 15-G009AX

    I have a HP 15-G009AX notebook with windows 8.1 (64 bit). Previously all USB ports were working fine when I had the 32 bit version of windows 8.1. After installing the 64 bit version, one of the USB 2.0 ports on the right hand side is not working properly. When I plug in an external HDD, there is no response at all from the system (the HDD light does come on). Also, when I plug in a USB mouse, it gives me an Error 43 ( says "Device decryptor request failed" in Device manager ). I have tried uninstalling all USB devices and restared my laptop several times. My sister has the same laptop which had Windows 8.1 32 bit earlier on which I installed Windows 8.1 64 bit and all the ports are working fine on that. kindly do help me out.

    Hello @rajeshdubal ,
    Thanks for posting on the HP Forums!
    I understand a USB port is not working on your computer, due to a 43 error in Device Manager. This error normally indicates a that the device has failed, for one reason or another. I will see what I can suggest!
    If you follow the steps in this Microsoft document, you should be able to fix this error: Code 43: Windows has stopped this device because it has reported problems
    If that doesn't help, you may want to reinstall the OS. A problem may have occurred because something went wrong with the installation of Windows 8.1 64-bit.
    Please let me know your results. Thanks!
    Mario
    I worked on behalf of HP.

  • HELP INSTALLING HP 3110 PRINTER WITH 2.0 COMPOSITE USB TO WINDOWS 8 NOTEBOOK WITH USB 3.0

    Need help installing HP PhotoSmart 3110 All in One Printer with USB 2.0 composite. Errors with message can't work properly with USB 3.0 which is on my new Windows 8 notebook. Read forum support doc for installing device on Windows 8 and ran Printer Install Wizard. Goes thru extracting and errors "the system can't find the file specified".
    HELP please. Have deadline on project.
    Thank you!

    Your V5-122p-0408 comes with only 1 USB 3 port, did you try both?
    If the printer worked fine on another computer then the problem most likely in on the V5.
    Are you running 8 or 8.1?
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • HP 15-d103tx Notebook PC USB ports not working

    Hi ,
    I am trying to connect an external keyboard to usb 2.0 port it is not working.If i conec in usb 3.0 port it is working
    please let me know if there is any issue
    Apperciate soonest reply
    Thanks
    Jyoti ranjan

    Hi @JRSingh 
    Welcome to the HP Support Forums!
    I understand that your keyboard works in the usb 3.0 port and not the 2.0 ports.
    Have you tried any other usb devices in the 2.0 ports, and do they have any problems at all?
    Have you tried all the usb 2.0 ports? If the other ports work fine it just may be a problem with one port.
    In normal usage, especially heavier usage, or if there are computer unfriendly natural hazards - like young children , my son damaged two usb ports on one of my notebooks by pulling the computer done with its cord, and broke the one usb port completely, and damaged another on a separate occasion. Sometimes when the cables are removed and replaced regularly, for example, the ports can become loose, and then you have problems with intermittent usb connections
    Another possibility would be to update the firmware for the board, as the usb in included in that. See the driver page:
    HP 15-d103tx Notebook PC Drivers
    Let me know if that helps at all.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Syncing music with USB port 1.1

    I just got an iPod classic 160GB, but it doesn't communicate with my computer properly.
    I tried to put some songs to the new iPod, but after syncing 20 songs I got the error message "Attempting to copy to the disk "(iPod name)" failed. The disk could not be read from or written to."
    I called AppleCare to solve the problem, and the guy told me that I need to upgrade the USB port from 1.1 to 2.0.
    Does anybody know if I really need to upgrade my USB port to 2.0?
    I read some of the topics on this discussion page and some people were saying that the USB 1.1 works with iPod classics.
    I also want to know if any of the transfer cables which convert FireWire to USB2.0 works with iPods.
    I don't want to spend any more money to upgrade my computer to make it work with my iPod.
    (I had to upgrade OS)
    Please help me to get my iPod work!!

    The USB port on your Cinema is a port on the built-in hub in the display. It can't supply the power needed by the iPhone.

  • Problems with USB port and song transferring;

    Hi! I just got an iPod and I am having problems with it. My computer doesn't have a Hi-Speed USB port, even if it's 9 months old. Some of my friends don't have it either but they still are able to transfer songs onto their iPod. For mine, it keeps saying "Do Not Disconnect." I waited for 5 hours last time I got it and it still isn't working.
    I also updated my iPod software today and the iPod icon isn't appearing on the bar to the left in iTunes. I'd really appreciate any help on this! As well as if I really need to do something about the ports or if it could function like this normally.

    Quote from: Svet on 08-December-10, 00:48:07
    Install chipset drivers from MSI web:
    http://eu.msi.com/index.php?func=driverfile&dno=2427&i=0
    +
    NEC USB 3.0 Drivers:
    http://eu.msi.com/index.php?func=driverfile&dno=11189&i=0
    are these the same driver provided with the disc driver? as i already installed both of these..

  • How do i connect a led cinema display 27" to notebook with hdmi port

    how do i connect a led cinema display 27" to notebook with hdmi port

    This is the way we did it:
    Get this 5 inch Mini Displayport Female to Displayport Female Coupler:
    http://estore.circuitassembly.com/products/5-inch-mini-displayport-female-to-dis playport-female-coupler.html#
    Then get a DisplayPort to HDMI cable
    http://www.startech.com/Cables/Audio-Video/DisplayPort/DisplayPort-to-HDMI-Cable -Male-to-Male~DP2HDMI2MM6
    This combination will enable you to connect your CinemaDisplay (mini-display port) to your HDMI input on your laptop or PC

Maybe you are looking for