GE60 0NC booting error

Hey guys my GE60 0NC seems te have some kind of issues.
When I boot it and logg in the booting seems to stop at the WiFi connecting.
At that moment I can start a few minor programs but a lot of booting hasnt been finished yet.
To fix this I tried to:
-Systemrepair it to 1 day ago
This seemed to help, I could use it again although it ran a lot slower than normal.
In addition some programs seem to have some error, for instance League of Legends won't boot.
However when I shut it down and rebooted it again I was back to the same booting error.
What could be the problem here?
Thank you very much for your time.
Olav

I've been having the same problem for over a week (MSI GE60 - i5-3210M, 6GB RAM and GT650M; bought a bit over a year ago).
It started with a normal boot, but when I logged into my account I couldn't start any programs for 5-10 minutes. My S-Bar also stopped responding and crashed.
At first I suspected malware/virus, and actually found some shady files that I deleted with Malwarebytes Anti Malware.
The problem was still there though, so I did a system restore (I couldn't go back more than a few days) and that seemed to fix the problem - but after a reboot it was back.
I could find some errors, like the one you linked, in the Event Viewer - but also alot of Information-events from NvStreamSvc (several every sec) which is a part of Nvidia.
So today I uninstalled GeForce-experience (couldn't launch it apparently, got some error) and then installed an older display driver 310.90.
I also reinstalled my S-Bar and now it seems like I run pretty decent. The WiFi-logo has gone back to normal and I can start up programs early after a boot.
You could also try and uninstall some recent Windows Updates - I'm not sure if they're involved, but you could always give it a try.
Hopefully this helps you, or someone else, in some way.

Similar Messages

  • MSI GE60 0ND SCM error

    Hey guys, I just recently bought new MSI GE60 0ND-480XCZ, which is shipped without OS. I installed Windows 8, all available drivers from MSI site and tried to install System Control Manager. There are available 2 versions. First is for Windows 8 notebooks and second is for Windows 8 notebooks which are upgraded from Windows 7 and have firmware version 4xx. Firstly I tried to install version for Windows 8 notebooks, everything went well but when I wanted to change anything inside the application (turn Wifi or BT on/off) it just froze. So I take a look into BIOS and I see, that there is BIOS and firmware for non-win8 systems. BIOS version is E16GAIMS.10F and firmware version is 16GA1404. And now what´s the problem. When I installed correct version of SCM, it won't even start, just a .NET framework error shows up.
    .NET framework is updated to latest version btw. Is there any possible solution, without downgrading to Win7?
    Here is whole error: (sorry for czech words in that, i'm czech and also sorry my english )
    Informace o vyvolání ladění JIT najdete na konci této zprávy,
    nikoli v tomto dialogovém okně.
    ************** Text výjimky **************
    System.FormatException: Vstupní řetězec nemá správný formát.
       v System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal)
       v System.Number.ParseInt32(String s, NumberStyles style, NumberFormatInfo info)
       v MSI.SCM.SCMII.LoadECORegistry()
       v MSI.SCM.SCMII.MainForm_Load(Object sender, EventArgs e)
       v System.Windows.Forms.Form.OnLoad(EventArgs e)
       v System.Windows.Forms.Control.CreateCont rol(Boolean fIgnoreVisible)
       v System.Windows.Forms.Control.CreateCont rol()
       v System.Windows.Forms.Control.WmShowWind ow(Message& m)
       v System.Windows.Forms.Control.WndProc(Message& m)
       v System.Windows.Forms.Form.WndProc(Message& m)
       v MSI.SCM.SCMII.WndProc(Message& m)
       v System.Windows.Forms.NativeWindow.Callb ack(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
    ************** Načtená sestavení **************
    mscorlib
        Verze sestavení: 4.0.0.0
        Verze Win32: 4.0.30319.18051 built by: FX45RTMGDR
        Základ kódu (CodeBase): file:///C:/Windows/Microsoft.NET/Framework64/v4.0.30319/mscorlib.dll
    SCM
        Verze sestavení: 10.212.11060.0
        Verze Win32: 10.212.11060.0
        Základ kódu (CodeBase): file:///C:/Program%20Files%20(x86)/SCM/SCM.exe
    System.Windows.Forms
        Verze sestavení: 4.0.0.0
        Verze Win32: 4.0.30319.18046 built by: FX45RTMGDR
        Základ kódu (CodeBase): file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
    System.Drawing
        Verze sestavení: 4.0.0.0
        Verze Win32: 4.0.30319.18022 built by: FX45RTMGDR
        Základ kódu (CodeBase): file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
    System
        Verze sestavení: 4.0.0.0
        Verze Win32: 4.0.30319.18045 built by: FX45RTMGDR
        Základ kódu (CodeBase): file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
    WPFOSD
        Verze sestavení: 1.0.0.0
        Verze Win32: 1.0.0.0
        Základ kódu (CodeBase): file:///C:/Program%20Files%20(x86)/SCM/WPFOSD.DLL
    PresentationFramework
        Verze sestavení: 4.0.0.0
        Verze Win32: 4.0.30319.18053
        Základ kódu (CodeBase): file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/PresentationFramework/v4.0_4.0.0.0__31bf3856ad364e35/PresentationFramework.dll
    WindowsBase
        Verze sestavení: 4.0.0.0
        Verze Win32: 4.0.30319.18053 built by: FX45RTMGDR
        Základ kódu (CodeBase): file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/WindowsBase/v4.0_4.0.0.0__31bf3856ad364e35/WindowsBase.dll
    PresentationCore
        Verze sestavení: 4.0.0.0
        Verze Win32: 4.0.30319.18053 built by: FX45RTMGDR
        Základ kódu (CodeBase): file:///C:/Windows/Microsoft.Net/assembly/GAC_64/PresentationCore/v4.0_4.0.0.0__31bf3856ad364e35/PresentationCore.dll
    System.Management
        Verze sestavení: 4.0.0.0
        Verze Win32: 4.0.30319.17929 built by: FX45RTMREL
        Základ kódu (CodeBase): file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Management/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Management.dll
    MSIECO
        Verze sestavení: 1.0.1005.2001
        Verze Win32: 1.0.1005.2001
        Základ kódu (CodeBase): file:///C:/Program%20Files%20(x86)/SCM/MSIECO.DLL
    System.Configuration
        Verze sestavení: 4.0.0.0
        Verze Win32: 4.0.30319.18053 built by: FX45RTMGDR
        Základ kódu (CodeBase): file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
    System.Xml
        Verze sestavení: 4.0.0.0
        Verze Win32: 4.0.30319.18053 built by: FX45RTMGDR
        Základ kódu (CodeBase): file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
    mscorlib.resources
        Verze sestavení: 4.0.0.0
        Verze Win32: 4.0.30319.18010 built by: FX45RTMGDR
        Základ kódu (CodeBase): file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/mscorlib.resources/v4.0_4.0.0.0_cs_b77a5c561934e089/mscorlib.resources.dll
    System.Windows.Forms.resources
        Verze sestavení: 4.0.0.0
        Verze Win32: 4.0.30319.18010 built by: FX45RTMGDR
        Základ kódu (CodeBase): file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms.resources/v4.0_4.0.0.0_cs_b77a5c561934e089/System.Windows.Forms.resources.dll
    ************** Ladění JIT **************
    Aby bylo povoleno ladění JIT, musí konfigurační soubor
    pro tuto aplikaci nebo počítač (machine.config) mít
    v oddílu system.windows.forms nastavenou hodnotu njitDebugging.
    Aplikace rovněž musí být kompilována s povoleným
    laděním.
    Příklad:
    <configuration>
        <system.windows.forms jitDebugging="true" />
    </configuration>
    Je-li ladění JIT povoleno, budou všechny neošetřené výjimky
    odeslány ladicímu programu JIT, který je registrován v počítači,
    a nebudou zpracovány tímto dialogovým oknem.

    Hi,
    I had same problem with my GE60NC and GE60ND and i solved it with reinstallation SCM on the newest version, exactly it was clean install of SCM - unistall, restart, install new SCM ...
    I hope it helps
    (Ahoj,
    stejný problém jsem měl u svého GE60 0NC i u druhého 0ND a vyřešil jsem to přeinstalací SCM na nejnovější verzi, respektive čistou instalací SCM - odinstalovat, restart, instalace nového SCM ...
    Snad to pomůže)

  • EFI support on GE60 0NC (bought with freedos)

    Hello!
    I bought MSI GE60 0NC (with FreeDOS preinstalled, too save some money for unneded Windows) few days ago.
    Unfortunately, I discovered that it's BIOS lacks EFI/UEFI support. At least, it is no any UEFI/SecureBoot related items neither in Setup Dialog (activated by DEL) nor in Boot Manager (by F11).
    Moreover, When I try to boot from USB flash stick (with unpacked EFI directory, and even with Shell.efi in the root) laptop says Quote
    This is not a bootable disk. Insert a bootable floppy and press any key
    When I trying to do the same from SD card in cardreader — laptop just silently proceeds to boot system from HDD.
    But, at the same time, dmidecode under Linux says:
    Quote
    note ~ % dmidecode | grep EFI
                    UEFI is supported
    in BIOS section.
    So, is it any way to get EFI working here? :'(

    Quote from: darkhawk on 29-August-13, 10:23:03
    UEFI doesn't really provide anything for these laptops.....
    Fast boot? Needless for bootloaders?   At least, it is my point, why I want to get UEFI here.

  • MSI GE60 0NC Problems After Upgrade

    Hi,
    Recently downgraded my MSI GE60 0NC from Windows 8 to Windows 7. Had some issues with the wireless connectivity. I then flashed the laptop to Windows 7 EC controllers. It was then working after this. I then purchased a Samsung 840 Pro SSD 512GB and Corsair Vengeance 16GB. After installing the SSD I then proceeded to do a fresh install of Windows 7. After downloading the wireless drivers I am being told that the drivers may be out dated. I dont understand what the issue is as the did the exact same procedure as before.
    Can anyone help me out please as the laptop is useless at the moment

    Thanks for the reply, check the first thing i wrote, i explained it a bit, also check the screenshot. I think that could be the problem, but im not that good with laptops so im not sure.. "MSI suite" cant find my motherboard so the program wont execute..
    edit: i've already tried the SCM that you linked, i get some errors with net framework so it wont execute after the setup..

  • Share FCPX with Blu-ray  USB3 LaCie writer boot error

    Hi
    I've been around the bush and back looking at how to burn a blu-ray movie to a disc from FCPX and a slim Blu-ray LaCie drive.  I was able to burn a 5 minute movie from FCPX without any trouble but as soon as I try and burn something larger (like an 11gig movie) 1080 HD I get up in the morning to find an error referring to boot directory or something with a boot in it. Sorry can't be more secific than that.  It's costing me everytime it goes wrong. 
    I logged a job with LaCie and they said any disc is compaitble so i'm wondering whether there is an issue with Final Cut Pro X ?  Thank you for any assistance. 
    Mike

    OK, I have FCPX. I burned DVDs etc all fine. I then burn a Blu-ray.  Initially I tried to save to hard drive and burn from there but that didn't work.  Seeing FCPX can burn directly to optical device (LaCie) I tried that (share menu in FCP) I got a boot error message that I didn't take a note of.  Today I tried again after I checked a few things out.  I put in my BD-R disc into the device.  FCPX says it is "finishing create blu-ray disc: burning Blu-ray"
    at 85% it then said Insert Disc, i did this and it is hanging. 
    I have been able to burn a 5 mintue Blu-ray sucessfully but as soon as I get to a 55 minute movie I have been unsuccessful.  Layers are automatic.  speed is automatic, it's a brand new mac running OS X 10.8.2    The guy I bought the discs from reccomends Roxio but why should I buy new software when FCPX says it burns.

  • Boot Error Sequence

    IdeaCentre K210 57078894 works fine until I completely shut it down and restart it.  I get errors like Boot Error Sequence, PXE-E53 No boot filename received, PXE-M0F.  When I go to the BIOS setup it says Primary IDE not detected.  Can anyone help fix this problem?

    Hi,
    You might try removing the hard drive and then put it in an external 3.5" USB enclosure and then test it on a different PC. This type of adapter could also be used to test the hard drive on another PC.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Some boot error

    I am getting some boot error at the very end at boot time and it moves to fast for me to catch it.
    I did try with read -n1 added to rc.conf but as the error is at the very end so it just jumps past the error.
    I had a look in /var/log files but could not really find anything.
    Where to find the boot log? Or something else?

    cell wrote:I did try with read -n1 added to rc.conf but as the error is at the very end so it just jumps past the error.
    You should add read at the end of /etc/rc.local

  • [Solved]Syslinux "booting... boot error" when booting Windows 7

    Hello, I've set up my computer to dual boot windows and arch. Windows is on a separate hard drive and I was able to configure syslinux with a boot menu allowing me to select Windows at startup. For a long time this has worked without any problems whatsoever, but this morning I tried selecting windows and I got what is probably the most vague error message I have ever seen.
    "Booting...
    Boot Error"
    According to this post this problem comes in when the ldsyslinux.sys file cannot be found. Unfortunately I was not able to use his suggested fix
    syslinux -U /dev/sdb1
    I wasn't aware that there was a -U flag for syslinux and after checking it seems that there isn't one.
    Last edited by samstr (2014-11-26 04:48:55)

    Sorry, I actually just fixed it on my own, it turns out my BIOS settings were a bit... weird. For some reason I didn't have my windows drive listed and it tried to boot a USB drive I had plugged into my computer. I just had to fix the drive order and it worked fine. Sorry about starting a fairly useless discussion.

  • Compaq CQ62-215DX-fan boot error, even after fan replacement

    I have a Compaq CQ62-215DX laptop. Everytime on startup I get this boot error "a system fan is not operation correctly" The system then automatically shuts itself down after a few seconds.
    I ordered a replacement fan and installed it, however I'm still getting the same issue.
    I figure the chances of the newly installed replacement fan being DOA are fairly low, so what should be next step to fixing my problem? Are there any common problems with the replacement of these fans on this particular computer? The laptop is a few months out of warranty so I'm either stuck paying a bunch of money to fix it, or buying a new computer if I can't fix it myself. Help!

    It's either a bad fan which I agree is unlikely or a bad fan header on the motherboard which means a new motherboard. Sorry.

  • Hp Pavilion a6863w getting disc boot error..can't get windows vista to open...need help diagnosing

    My computer will not open Windows Vista.. I get a disc boot error. I have run a few diagnostics but need help to preceed. Have important files on the computer I need access to. Can anyone help walk me through the process? Thanks  Also when I look at the check s that have been done it says something about a registry problem.  HP Pavilion a 6863w 
    {Edited for privacy}

    Have you run a Hard Drive test in BIOS?
    Jennifer P
    I work for HP.
    Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks

  • "NI-488 boot error: OpenMarkedDrivers failed"

    The GPIB card was working on wednesday, then Friday it was giving me the error "NI-488 boot error: OpenMarkedDrivers failed". I've tried installing an updated driver but nothing works. I don't know if it is a problem with the software or the GPIB card itself

    Hi,
    What OS and driver version are you using? When exactly does the error show up?.
    I only found one (old) reference to this error.
    DiegoF
    National Instruments

  • Serious boot error. very annoying. P6NGM mobo. NVIDIA mcp73 chipset

    Serious boot error. very annoying. P6NGM mobo. NVIDIA mcp73 chipset
    I have a 80gb Western Digital that i installed xp on using another computer but it still wont boot nor will the cd drive boot even with a 100% original valid windows installation disc.
    No matter what I do I always get the stupid "Reboot and Select proper Boot device or insert Boot Media in
    selected Boot device and press any key."
    At first i thought the motherboard was fried so i sent it back and had it replaced.  Put it together, booted it, still the same problems.  I have the hard drive set as master drive and it has windows xp installed but it still wont boot from it. please assist
    System is:
    # Intel Core 2 Duo E6750 Conroe 2.66GHz 4M shared L2 Cache LGA 775 65W Dual-Core Processor
    # P6NGM Motherboard (MS-7366)
    # 1GB RAM
    # Onboard NVIDIA MCP73 Series Chipset
    # Western Digital Caviar SE WD800JB 80GB 7200 RPM 8MB Cache IDE Ultra ATA100 Hard Drive
    # Windows XP SP1 already installed on the hard drive using another computer
    # 400W Power Supply

    Take attention to WD jumper config:
    Jumperless = Standalone
    Jumper master = Master with Slave
    Jumper slave = Slave with Master
    Leave WD drive alone in the channel and remove jumper from the drive:
    Make sure that IDE cable is connected in correct direction, (blue to mainboard and black to HDD in a picture below):

  • Upgrading Processor GE60 0NC

    hi there,,,
    uhmmmm newbie here..
    i would like to ask you for any suggestion, is it possible for me to upgrade the processor of my GE60 0NC??
    what would be the best?? something better on my current processor
    tnx in advance!!

    thank you very much,, 

  • BIOS for GE60-0NC

    What will you be adding if I get an unlocked bios from you?(Svet)

    Confirmation: 0N266195SS856405T
    GE60-0NC
    MS-16GA
    HM76
    E16GAIMS.10F
    12/18/2012

  • BCD/boot error 0xc0000001 ~ stuck on broken windows partition

    Okay so I have a macbook pro 2009 and I recently partitioned my hard drive to get windows 7 premium using bootcamp. While installing new software for my windows side it it froze up and I had to do a hardshut down. After I restarted my computer it came up with a black screen that says boot/bcd error - 0xc0000001
    info: an error occurred while attempting to read the boot configuration data.
    It instructs me to
    1. insert your windows installation disk and restart my computer
    2. choose your language settings and then click "next"
    3.click "repair your computer"
    problems I've come across while attempting to fix this
    1. when selecting what operating system to repair after starting up the windows installation disk there are no operating system that shows up.
    2. "repair your computer" option does not work and cannot repair the problem.
    3. cannot hold down option to go back to Mac side because of EFI lock which I don't know the password to it.
    4. cannot get to safeboot for reasons unknown, but holding down f8 doesn't work and holding down FN with F8 also does not work. It just goes to the boot error screen.
    5. System restore does't work either.
    6. went into command prompt and typed sfc / scannow but it says that another scan is in progress but needs to reboot to start. Every time I restart the same message pops up.
    All I really want to do is get back to my mac side so I can delete the partition at this point. But it is IMPOSSIBLE so if anybody knows any solutions please do share. thanks!

    Hi electrovalent,
    I agree with Tripredacus,we seem to miss the important part that we should boot from the UEFI mode for a GPT format disk.To boot from the UEFI mode:
    1.Insert the installation DVD or USB flash drive, and boot the computer.
    2.When the firmware starts to initialize, press the key that opens the UEFI firmware boot device menu, such as Esc, F2, F9, F12.
    3.Select an EFI drive, examples: EFI DVD/CD Drive, EFI USB Drive, or EFI Network Drive. You may be immediately prompted to press a key to boot from the drive to continue.
    Here is a link for reference :
    Walkthrough: Boot Windows PE from a UEFI-based Hard Disk
    https://technet.microsoft.com/en-us/library/hh265131(v=ws.10).aspx
    I have noticed you have tried the "Startup Repair"option before but I would suggest you try this option again .Because we have chosen the UEFI mode this time and this option is usually useful and convenient to repair the boot loader.
    If the issue persists ,try the following command line .I also noticed you have tried the similar command line before but I have made a little modifications according to the screenshots you have posted.
    diskpart
    list vol
    sel vol 2  (Volume 2 is the fat32 volume,this step is not included in the screenshot )
    assign letter=v
    exit
    ren BCD BCD.old (Backup bcd )
    bcdboot c:\Windows /s v:  
    Best regards
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

Maybe you are looking for