GE60 2PL (Win 8.1 64 bit) too much lag and freezes

So I have been using my GE60 2PL for about 2 weeks and there is so much lag..
Even when I'm using only chrome, sometimes the laptop freezes or lag (like when dragging tabs or files, it lag..)
The laptop was running in high performance with charger connected (without battery..)
So I have tried defragment, virus check, and driver upates but there are still so much lag
I don't really know what the problem is and pretty hard to identify what might be causing it too.. because my internet connection is okay as well as I'm not playing some high-end games.. (temperature is also okay)
I need some advice or solution to this lag.. I can provide you more information if necessary
oh and while I was playing Dota 2 my laptop got force shutdown (because I was using without battery, charger connected then my electricity went out... ) I am curious how would force shut down would effect the laptop? Like what will it damage?
Thank you

Quote
oh and while I was playing Dota 2 my laptop got force shutdown (because I was using without battery, charger connected then my electricity went out... ) I am curious how would force shut down would effect the laptop? Like what will it damage?
this should not cause damage
attach your battery then plug again your ac charger and see how goes.
don't play only on ac charger, battery is used as addiction power source in addiction to the ac brick

Similar Messages

Resizing tablespace is taking too much time and freezing the database

This is my database setup:
3 node rac on 32 bit linux (rh 4)
2 SANs (3gb + 2 gb)
asm config: everything is default from installation
current datafiles: 3.2T out of 5.0T (autoextend on)
this is how I do to resize the tablespace manually to test how long it takes:
alter tablespace my_tbs resize 3173562M; //from 3172538M (adding another 1gb)
And it took 33 minutes to complete.
Could someone tell me what is wrong?
ps:: when i check the instance performing, the "SMON" user is like 97% of db activities. And while the resizing is running, the database seem to freeze.
Thanks,
Chau
Message was edited by:
user626162

sorry, it is 5 Tera bytes total.
there are 2 sans, one is 1.7T (one partition). the other san has 3 partitions with 1.1T each. I have only 1 datagroup
I used big file so there is only one big file for this tablespace. the size of the tablespace is 3.2T used with autoextend on (increment size is 1G)
this is the command I used to manually resize the tablespace:
alter tablespace my_table_space resize <3229923M>; //current size + 1G
Thanks,
Chau

Why does my laptop give me a warning saying that firefox is using too much memory and to restart firefox to be more efficient? I just bought this laptop so I know it has the power to run what I need it to.

Why does my laptop give me a warning saying that firefox is using too much memory and to restart firefox to be more efficient? I just bought this laptop so I know it has the power to run what I need it to.

You appear to have AVG installed:
*See --> http://forums.avg.com/ww-en/avg-forums?sec=thread&act=show&id=173969#post_173969
From reading on the internet, it appears that when there is a spike in memory usage, AVG "interprets" that as a memory leak, possibly caused by malware. AVG could be incorrect concerning that assumption. Maybe they are being a bit too conservative about memory usage; just my opinion.
The decision is yours to turn off the "advisor" or leave it on.
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*'''''Adobe PDF Plug-In For Firefox and Netscape''''': [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

Taking too much time and not connecting to ipad software server

taking too much time and not connecting to ipad software server and not updating.. why

because everyone is doing the same thing you are... be patient, and you will get the update... I had to grab the update over 3G (it won't let you download or install, but it got me in the door) and then switch back to wifi and download and install.

For the last month or so my icloud won't back up, it keeps telling me that there is too much storage and I need to delete some data. But I have deleted between 3-400 photos and it is still saying the same, can anyone please help

For the last month or so my icloud won't back up, it keeps telling me that there is too much storage and I need to delete some data. But I have deleted between 3-400 photos and it is still saying the same, can anyone please help

If they were deleted from your camera roll that should have resulted in a corresponding decrease in the estimated size of your next backup.
If it's still saying that you don't have enough storage to back up, read through this article: http://support.apple.com/kb/ht4847. It provides some suggestions for reducing your iCloud storage, such as deleting unneeded email.
The other area to look at is your text messages. These are included in the backup. If you have lots of photos and videos attached to your messages, that can significantly increase the size of your backup. If that's the case, deleting these may make a big difference.

Kernel_task is spending too much CPU and Ram

I have Macbook Pro 13' mid 2012 I bought it 9/2013 and its started to become too slow like seriously slowed when I check the Activity Monitor kernel_task spend too much RAM and CPU and because of the usage of CPU my computer becomes overheated. This what comes up when I do the EtreCheck;
EtreCheck version: 1.9.15 (52)
Report generated 5 Sep 2014 18:00:42 GMT+3
Hardware Information: ?
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information: ?
Intel HD Graphics 4000 - VRAM: (null)
Color LCD 1280 x 800
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 0:36:17
Disk Information: ?
APPLE HDD HTS547550A9E384 disk0 : (500,11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209,7 MB
Macintosh HD (disk0s2) / [Startup]: 499,25 GB (321,73 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R   UJ-8A8
USB Information: ?
Logitech USB Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Anywhere
Kernel Extensions: ?
[not loaded] com.devguru.driver.SamsungACMControl (1.4.20 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungACMData (1.4.20 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungComposite (1.4.20 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungMTP (1.4.20 - SDK 10.5) Support
[not loaded] com.devguru.driver.SamsungSerial (1.4.20 - SDK 10.6) Support
Startup Items: ?
FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.skype.skypeinstaller.plist Support
[loaded] com.teamviewer.Helper.plist Support
[not loaded] com.teamviewer.teamviewer_service.plist Support
Launch Agents: ?
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[not loaded] com.teamviewer.teamviewer.plist Support
[not loaded] com.teamviewer.teamviewer_desktop.plist Support
User Launch Agents: ?
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.BlueStacks.AppPlayer.LogRotator.plist Support
[loaded] com.BlueStacks.AppPlayer.Service.plist Support
[loaded] com.BlueStacks.AppPlayer.UninstallAgent.plist Support
[loaded] com.BlueStacks.AppPlayer.UpdaterAgent.plist Support
[loaded] com.facebook.videochat.[redacted].plist Support
[loaded] com.google.keystone.agent.plist Support
User Login Items: ?
None
Internet Plug-ins: ?
DirectorShockwave: Version: 12.1.3r153 - SDK 10.6 Support
Flash Player: Version: 11.9.900.170 - SDK 10.6 Outdated! Update
FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6 Support
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 537 - SDK 10.9
Safari Extensions: ?
Searchme-2
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins ?
BlueStacks Install Detector: Version: 0.3.6 - SDK 10.7 Support
3rd Party Preference Panes: ?
Fan Control Support
Flash Player Support
Time Machine: ?
Time Machine not configured!
Top Processes by CPU: ?
      22% Skype
      10% WindowServer
      7% coreaudiod
      4% Google Chrome
      3% sysmond
Top Processes by Memory: ?
181 MB Skype
84 MB Google Chrome
61 MB mds_stores
57 MB systemstats
57 MB WindowServer
Virtual Memory Information: ?
1.48 GB Free RAM
1.51 GB Active RAM
392 MB Inactive RAM
637 MB Wired RAM
561 MB Page-ins
0 B Page-outs

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Labview 2010 vi using too much RAM and causing Crashes

hello everyone,
I was given a LV 2010 vi to integrate with another functionality.This Vi is used for a long time on XP and Windows 7 platform having various RAM size.it still runs fine on those PCs. This Vi has functionality that it waits for user to press start button that it reads data and plots.however i am not giving start command and it starts consuming too much RAM and resulting system Crash.
System Config: I have Core i5 CPU 650 @ 3.20GHz with 2 GB RAM and windows 7 .
Plz show some methods to prevent them and why it is happening.?
Note:1) i also checked my ram through windows test and it has no error.
2) windows shows me some low disk error sometimes.
plz help me out here i am stuck here for week.
thanks & regards

Post your VI if you are allowed, we cannot help you without that info...
If you are a beginner in LabVIEW, it will not take 1 day to gain some level. LabVIEW is a full featured programming language, it is very easy to program it wrong. I suggest you to start learn it using the online resources. You have an active LabVIEW licence? If so, you can access the "self-paced online training" via menu point "MyNI", see top of this website just next to your name (you need to connect your account to your licence in order to use the online training). Another option could be to pay for a virtual classroom course, get more info here: http://sine.ni.com/tacs/app/overview/p/ap/of/lang/en/pg/1/sn/n5nline,n24:12725/id/1582/ I did this a few years ago (Core 1 and 2.) and the tutor from NI was very professional, and it was also comfortable since you attend the class via internet from yoour home or workplace.

The device was drawing too much power and that the USB port will be shut down

New to forum, help,
Cannot add a USB hub, powered or not, keep getting message
The device was drawing too much power and the USB port will shut down.

Hi
Is your machine connected to AC power? If not, connect it, and it should work. You may also try resetting the SMC.
If it still doesn't work when connected to AC, then the hub most likely is drawing too much power (i.e you have too many devices connected to it)
Taylor

Skype Update: Too much lagging

Hey,
I just got an automatically update from skype. The version I am using currently is "6.22.0.107". Here is the screenshot: http://prntscr.com/5crn4q Also check the attachment
After an update I am facing too much lag in skype. I can't even use skype properly. Whenever I am trying to type a message or switch a contact the window gets stuck. Kindly provide me a solution ASAP.
Thanks

Hi,
Here are the System Requirements for
Snow Leopard Specs:
http://support.apple.com/kb/SP575
Lion Specs:
http://www.apple.com/macosx/specs.html
In all honesty your are probably correct in your assumption about updating an Older Mac too much...
Just my opinion by the way... others may differ...
Cheers,

Macbook telling me that my external hard drive with a usb is pulling too much power and has been dialed what do I do

I have been using my Seagate Free Agent 500g external hard drive for years without even a hint of a glitch but this morning I trying plugging in the usb and got an error message that stated that the hard drive was pulling too much power and was being diabled. So now I cannot get the hard drive to connect period. What do I do - could it be a power cord issue?

Hi cactus flower,
If you are getting a message that a USB device such as your external hard drive is drawing too much power, there are a number of things you can do. I would suggest the steps in this article -
Apple Computers and Displays: Powering peripherals through USB
http://support.apple.com/kb/HT4049
Specifically this section -
Troubleshooting
If you have a peripheral (such as a hard drive, audio device, or camera) that is acting unexpectedly—such as not turning on or not being recognized by the computer—the peripheral may require more power than is available. If you have a USB peripheral or a chain of devices, such as a joystick plugged into a keyboard, which requires more than the available power try one of these options:
Use a USB hub that comes with a power adapter.
Check that the peripheral offers the ability to connect to more than one USB port at once.
Find out if the peripheral comes with a power adapter.
If you cannot confirm your device's use with a hub, connect the device directly to the Apple computer.
Thanks for using Apple Support Communities.
Best,
Brett L

A bit too much repeating :)

I haven't touched Spry in a bit over a year, and I'm having to go back a relearn a lot (and I usually only use this sort of thing on personal projects) -- so I am w-a-a-a-y out of my depth here.
I have an xml file:
     <Library>
         <Project>
               <Name>
                    <Items>
                         <Item>
                              <Detail>
                              <Detail>
                         </Item>
                         <Item>
          <Project>
I constructed a page that I was fairly proud of that displayed all of the data quite nicely for a single project. So then I added several more projects to the xml file and, for items that repeated within a project and that I was displaying with a "spry:repeat", I started getting all of them in the file showing up within the individual Project.
I actually can see, I think , how to solve this dynamically, but if I just want to display each project, more or less as a flat listing of the contents of the XML file (mostly to just prove to myself that I understand what is happening at this level before I try something some complex) what do I need to be doing? I've been reading the xpath summary over at w3schools, and have been reading the spry documentation concerning datasets but don't seem to have found (or understood?) what I am looking for that would explain to me what I am doing/doing wrong. I thought I was onto something about nested xml datasets and the example of cakes and their toppings, but I couldn't get that to work--and noticed that the SpryNestedXMLDataSet.js wasn't even included with the Dreamweaver includes, although it was in the total package when I downloaded that.
I want to keep reading the documentation, because that is the way I learn this sort of thing best, but could someone please give me a few hints so that I know that I am at reading in the right place?
Thanks!

Hi,
Sounds like Spry nested datasets is exactly what you need. I have a photos page that shows photos from multiple club events with each event having multiple photos. Sounds like a match for your multiple items within project
The page is here http://www.thehmc.co.uk/photos.asp and the xml source is here http://www.thehmc.co.uk/
xml/ImgPhotos.xml .
Within my XML consider collection equivalent to your project node and ImgPhotos equivalent of your item node.
You need to include the Spry nested dataset javascript file as well as the SpryData javascript file.
<script src="SpryAssets/SpryData.js" type="text/javascript"></script>
<script src="SpryAssets/SpryNestedXMLDataSet.js" type="text/javascript"></script>
The Spry datasets are defined via
var Galleries = new Spry.Data.XMLDataSet("xml/ImgPhotos.xml", "imgGallery/Collection",{sortOnLoad:"PubDate",sortOrderOnLoad:"descending"});
Galleries.setColumnType("PubDate", "number");
var Photos = new Spry.Data.NestedXMLDataSet(Galleries, "ImgPhotos");
Then you defined the regions as below
<div class="SpryHiddenRegion" spry:region="Galleries Photos" >
        <div spry:repeat="Galleries">
              <div class="photoTitles">
              <h2>{Title}</h2>
              <p> {Description} <a href="{Link}" target="_blank" spry:if="'{Link}' != ''">MORE..</a></p>
              </div>
               <ul class="Gallery">
                   <li spry:repeat="Photos">
                     <a href="ePhotos.asp?imgUrl={Photos::imgUrl}&imgAlt={Photos::imgAlt}" target="_blank" ><img src="{Photos::imgUrl}" alt="{Photos::imgAlt}" /></a>{Photos::imgAlt}</li></ul>
       </div>
      </div>
Hope this helps
Regards
Phil

Running slow and I keep getting messages saying Firfox is using too much memory and that I should close the progtam. Do I have memory leakage?

Firefox quits responding

You appear to have AVG installed:
*See --> http://forums.avg.com/ww-en/avg-forums?sec=thread&act=show&id=173969#post_173969
From reading on the internet, it appears that when there is a spike in memory usage, AVG "interprets" that as a memory leak, possibly caused by malware. AVG could be incorrect concerning that assumption. Maybe they are being a bit too conservative about memory usage; just my opinion.
The decision is yours to turn off the "advisor" or leave it on.
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*'''''Adobe PDF Plug-In For Firefox and Netscape''''': [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

Can someone tell me if there is a way to sync address book, calendar and mail ONLY, no music from Itunes to Iphone 4s from my Imac G5, OS 10.5.8? I bought a 16 GB and have too much music and no icloud on my machine (or my ipod 5th gen)

I was told I CANNOT only sync part of my music from my Imac Itunes, and since I have an ipod and itunes with the music, I don't really need it on my iphone, but if I sync all the rest, is it going to sync the music too! It is too much data if it does!! And did Icloud take the place of "mobile me". If so can that be used to get some music if I want to from my hard drive mac or ipod?

You were told wrong. You can sync only what you want to sync.
Yes, iCloud is taking place of Mobile Me over time. MM will be turned off in June of next year.
With iCloud, you can store the music in the cloud and download the tracks that you want to listen to without having to sync to your iTunes.

OIM 11g using too much memory and not releasing it when shutting down

Hello,
we have a problem with OIM 11g using too much memory (about 5gb) and it's not releasing it at shutdown (4gb still used).
We are using a VM with RedHat Linux 5.6. Originally we had 4gb RAM + 2gb swap file. We installed Admin Server, OAM, OIM and SOA on that machine but quickly realised we couldn't run all 4 programs at once in 6gb. AdminServer could run with 2 other products, but it was a tight fit in memory.
So we increased the RAM to 8gb (still 2gb swap file). But then our problem occured : I start the Admin Server (2.7gb total memory used), then OAM (4.6gb total memory used) and then OIM. After it started the server is now using 9.6gb of memory (~300mb of free memory) ! The problem gets even better : after I shut down everything (OIM, OAM, admin server) the "top" command show that there is still 4gb of memory used even tho nothing else is running on the server ! There is absolutely no other process (other than root stuff) running and no other users connected to the machine. After a reboot, it shows 400mb of memory used. I tried restarting the programs and it did the same thing.
Our intuition is that there might be a memory leak or some bug in OIM that might use up almost all the free memory and it's not releasing it upon shutdown. It might have been there before we increased the memory but have not noticed it since memory was already tight.
Anyone encountered the same problem ? Any idea ? Any suggestion to narrow down the problem ?
Thank you

You can adjust the memory settings for WLS by editing the setSOADomainEnv.sh file that can be found in your /middleware/user_projects/domains/<domain>/bin/ folder. There is an argument called PORT_MEM_ARGS which is used to set your Java memory arguments. This way you can decrease/increase the amount of memory used by each managed server.
I usually type "ps -ef | grep oracle" to see what processes are running by the oracle user. This way the output doesn't get cluttered with root processes.
Sunny Tsang

How do I remove the Icons next to each bookmark on the bookmark toolbar? They take up too much space and all the bookmarks I need on the toolbar dont show up.

On my bookmarks toolbar, each bookmark has the associated webpage icon next to it. I would like to remove those icons, as they take up too much space.
Thanks

The icons, if you are familiar with them or they are obvious, take up less space than the words. You can abbreviate the names down to next to nothing or even nothing.
To save space and help organization you can group bookmarks into folders on your Bookmarks toolbar.

GE60 2PL (Win 8.1 64 bit) too much lag and freezes

Similar Messages

Maybe you are looking for