Ge60 screen dose not work but laptop still works through HDMI
I have an msi ge60 laptop and I have owned it less the six months and the screen has stopped working. I have tried removing the battery but thats not the source of the problem. I plugged it into my TV via HDMI and i can see and use my laptop through that but i still can't see anything on my laptop. Also I have tried the button to switch what display its on and it s not working any help would be nice.Thank you for reading.
Quote from: blueberrycupcake on 05-March-14, 03:42:52
I have an msi ge60 laptop and I have owned it less the six months and the screen has stopped working. I have tried removing the battery but thats not the source of the problem. I plugged it into my TV via HDMI and i can see and use my laptop through that but i still can't see anything on my laptop. Also I have tried the button to switch what display its on and it s not working any help would be nice.Thank you for reading.
You're going to need to do an RMA with MSI. Most likely there isn't anything we can do here to help you.
>>How to contact MSI.<<
Similar Messages
-
i can not charge my Ipad after I droped it,also the home screen dos not work,whats the solution?
Hard Reset
Press and hold BOTH the Sleep/Wake button & the Home button until you see the Apple logo on the screen.
if no result try to back up and restore via itunes on a computer.
if wont restore try this
recovery mode
open itunes on computer
plug cable into computer not iOS device
turn device off
hold home button and plug cable into IOS device. do not release home button until an itunes graphic appears on IOS device.
look to computer should have message about recovery mode click ok and restore
Peace, Clyde
if u need an article see
http://support.apple.com/kb/HT1808 -
The bottom of the screen dose not work
help me or tell me how to fix it or who much it well cost to fix it
The way you can figure it out is by checking your service and support coverage at Apple's Website. All you have to do is enter your serial number.
Just follow the link below.
https://selfsolve.apple.com/agreementWarrantyDynamic.do -
My iphone 4G restaet with redflashing screen after that i am try to turn on but dose not work
Dear All:
My iphone 4G GSM restart with redflash screen after that i have try to turn it on , but dose not work , still black screen ( dead)
Best RegardsYes Mate I had connected to computer
-
Hi I was just wondering, if my iPod nano's serial number says that it is eligible, but its screen is not working, am I still eligibile for the iPod nano 1st gen replacement?
Yes. They'll still replace your iPod. Several users have indicated that they have returned damaged iPods and were still given a replacement iPod.
B-rock -
My screen just went blank and is still on but the screen is not working what shall i do?
my screen just went blank and is still on but the screen is not working what shall i do?
Have you tried turning off the phone and then turning it on again?
-
Help! my screen is not working but my ipod still plays music
my ipod screen is not working - i can get music to play and the backlight still comes on when i press menu i just can't c any writing. I have charged it for hours and reset it. What is wrong with it???
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data
-
touch screen does not work on my ipod when playing music on itunes, but works fine on every other thing on ipod, can anyone help or what is the cause
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
My iPhone 4 screen stopped working. The phone is still on but the screen is not working at all, it is juts black. I was told restoring my phone might solve this problem so i plugged it into iTunes. When I click on the restore iPhone button a message popped up saying I needed to turn off 'find my iPhone' in phone settings for the restore to be go ahead. Problem is I cant access my phone!
I went onto my cloud account to see if i could do it from here but it doesn't seem to be doing anything. Any ideas?From your iCloud account, you can go to Find My Phone and remove the iPhone from your devices list which will release it, or you could do a remote erase of the iPhone from iCloud.
-
Since I installed the latest Firefox my Roboform dose not work. It still works with IE.
I have Roboform Pro, I don't want to down grade to Lite. Roboform is working, but I can't get the full Toolbar to display all that shows up is the Show Toobar icon and nothing happens when I click it. So I can't fill in log on forms. Isn't there a way to get the pro version to work?
Thank you for your input and trying to answer my questions. -
hi my name is Aditya. i am using ipad 2. 2 days ago my ipad fall down from my hand and now its screen is not working it is totally blank but shocking thing is that when i take a screen shot the display came back for 2-3 second. dose ne 1 have same problem....?
Anyone have any suggestions? or is everyone else just as clueless as me !
-
I have recently upgraded from my iphone 5 to a new phone. My iphone 5 's touch screen does not work anymore. I need to backup my phone, but I can't do it on itunes without my password. Everything besides the screen is completely fine-the screen will not recognize my finger anymore. I am not trying to fix the phone, but I need to have my contacts. The pictures have already synced, but I need my password to do a full backup. Unfortunately, I can't type in my password. Is there any way around it? If I take my phone to the apple store, will they be able to help me? I am not willing to replace the screen just to do this, however, so that is out of the question.
Someone else may have a workaround, but, as far as I know, if you cannot interact with the screen on the iPhone, there is no way to unlock it so you can get to your contacts.
Were you saving them to iCloud by chance? If so, you can restore them to your new phone.
~Lyssa -
i updated to iOS 5.1 but my camera buttone form the lock screen is not working what should i do. i tryed restoring but it didnt work .
When i try the camera loncher but it's not workingi feel stupid now because i didnt know to swipe it up lol
thanks -
Actually, my iphone was hanged and its screen was not working at all .So, I updated its software from market but for reactivation it require icloud account but i didn't know how exactly it is and i was caught in big trouble . But i have its box and all other accessories .So , kindly help me as early as possible .Thankyou and tell me about its solution
<Email Edited by Host>Basic troubleshooting steps outline in the manual are restart, reset, restore from backup, restore as new. Try each of these in order until the problem is resolved. If you've been through all these steps and the trouble persists, you'll need to bring your phone to Apple for evaluation. Be sure to make an appointment first at the Genius Bar so you won't have a long wait.
Best
GDG -
I cannot open my phone as the screen will not work. I have made an appointment with a technician tomorrow but is there anyway of backing my phone up to Icloud so that I do not lose any of photos etc etc?
PLug it into yrou computer to sync/back it up.
Is it set to back up to iCloud now?
Or do you have wifi backup enabled in iTunes?
Plug it in while on wifi and it will automatically back up.
Maybe you are looking for
-
SA Schedule Lines from MD03 date calculation
Hi Please find the following snap from MD03 , here the schedule lines generated dt 06-06-14, for this material planned delivery time and GR processing time is zero in material master, In info record planned delivery time is 1 day, I unable to underst
-
How can I get data in flat file from Pool table and cluster table ?
Hi, I am working in one Achiving project. My requirement is to get data into flat file from Cluster table and pool table. Is there any tool avilable to download data into flat file from pool table and cluster table ? if table name given in the select
-
How to create a $CUSTOM_TOP in 11i
Hi All, Where can i get the document that gives an idea how to create a $CUSTOM_TOP in 11i in Linux Many thanks in advance... Best Regards,
-
My macbook pro cpu temperature is too high??please tell me correct fact and information
i mistake deleting my activity.......re question... I'm using macbook pro retina 13inch 2013 late version. my macbook has NO external graphic card, just iris graphic. when i was playing diablo3 or watching movie by using bypass ip address, my cpu tem
-
How can I have small videos play full screen?
I have a design with embedded videos (pulling from my photo album). In the design they fit inside other elements, often at a reduced size. When I tap them in a presentation, I'd like them to go full screed instead of playing at their "native" embed s