GE70 2OE, FPS DROPS
hey,
i bought the GE70 2OE gaming series notebook last week. but i noticed when i play CSGOi get fps drops from 170 fps to 20-30 fps for about 10 - 50 secs. This keeps on repeating during the gameplay and in dont think it's normal.
when i run MSI Kombustor i get 45 fps with 99% GPU Load, and without graphics ring i get 91 FPS with 17% GPU Load.
and if i look on msi afterburner when playing csgo i see that i have 70% GPU load = 170 FPS, and then it drops to 20 fps and i get 25% GPU Load.
i reinstalled csgo this didn't help, then i did a fresh W8 install but didn't help at all either. then i run MSI live update, it says there is a intel svga driver update, and when i install this i only get 15 fps on MSI Kombustor and 80fps on csgo. so i deleted this update because it got worse. i checked nvidia updates, but non available.
i hope somebody know's a fix, or knows what the problem is. to play games like this is not very fun.
setup: Intel i7 4th generation
intel HD Graphics 4600 / Nvidia GeForce GTX 765M 2GB
750GB HDD
Quote from: darkhawk on 06-July-13, 09:10:44
Well, I'll be perfectly honest here, your CPU is running at nearly the max allowed temperature, which is most likely why it is throttling.
Notice how it's running at 80C or more on all the cores? That is not very good.....
Now, I'm not sure how adept you are with computers and/or electronics.
What I would suggest, if you are adept, is to replace/re-apply the thermal compound on the heatsink(s) for the CPU and maybe the GPU as well.
If you are NOT adept at it, then I would suggest RMA'ing the laptop. >>How to contact MSI.<<
when i start the game, and core temp are like 60°C, the CPU is already throttling. not only at 83°C.
and is not always at 83°C, when playing it goes from 71 - 83°C, and when not playing, it goes from 54-61°C
and about the heatsinks, it's a brand new notebook. so i got it delivered broken or what? and what about my 2year warranty!
what u mean with RMA'ing the laptop? xD
i just ran the Intel Processor Diagnostic Tool, and the test passed. temp and everything was normal.
test results ( i can give the TestResults.txt file for full test results):
--- Load Level = 8
CPU Load Passed!!!
--- Temperature Test ---
Temperature Test Passed!!!
Temperature = 9 degrees C below maximum.
--- Test End Time: 07/06/2013 12:27:52---
CPU monitor when running intel processor tool:
Similar Messages
-
Hi guys ! I have a big problem. I am using Windows 8.1 with update 1. Drivers are all up-to-date. BIOS and Firmware are all up-to-date. Everything seems fine but isn't. While I am playing Battlefield 3 (Original) fps is suddenly dropping to 20-30 from 60.(No explosion no action) I thought that's heat problem and I sent it to the MSI service for maintenance. But that didn't help. I reinstalled W8.1, neither did this. Not only in Battlefield 3. In Battlefield 4, DirT 3, Crysis 3 :( What can I do ? Please help.
I would use HWInfo to monitor the CPU core's to see if the speed of the CPU is dropping drastically during the low FPS times.
If that isn't it, then you might need to look into DPC's to see if it's a latency issue (which wouldn't be the first time this is a problem). -
I have bought GE70 2OE about 1 week and I have some troubles when using it to play games.
I have set the power options to "High performance".
When there is no games running, the CPU maximum frequency can be maintained at 13X%.
However when I am playing games, the frequency keeps varying in different percentage, causing FPS drop suddenly.
This causes very unstable in game, which forces me to stop playing.
Is the CPU or other hardware was defective? if not, How can I solve it?
Here is a video showing this problem.
Youtube link:
Please help><"Quote from: darkhawk on 12-September-13, 04:43:59
Use MSI Afterburner AND Coretemp to get the temperatures of the CPU and GPU while playing the game, and while not playing a game.
It sounds like the CPU/GPU are overheating and throttling back, which is what is causing the FPS drop.
Temperatures of CPU is around 75-85 degrees(Celsius) and GPU is 70-80C while playing games.
When not in game, CPU is about 55C and GPU is 40-45C.
I searched a post said set the max processor status from 100% to 99% can keep cpu runs at 2.4GHz.
It's work, but totally being so slow when loading.
My notebook is brand new, I thought that will not have heatsink problem?
Anything I can do?
Should I send it to MSI for checking the hardware?
Thanks a lot. -
GE70 2OC - FPS drops, CPU throttling
Im new to this forum so welcome everybody. Hope this is a right place to post and I hope you guys will be able to help me.
I have a brand new MSI laptop, GE70 2OC model, with i7-4700MQ and Nvidia GT 750M.
I am experiencing some overheating issues during gaming. When laptop is idle or I'm simply browsing the web the temperatures of CPU and GPU seem OK, in between 30-40 degrees (Celsius). The problem starts with gaming. Of course I'm using Gaming mode (as of power management) and Cooler Boost technology (without it I would be doomed it seems).
After 15-20 minutes of gaming the lapop heats up pretty badly. The CPU temperatures exceed 90 degrees and the GPU reaches 80-85 degrees. Then come the FPS drops, every few seconds the game becomes unplayable for 1-2 seconds then its ok for few seconds and so on.
I started diagnosing the problem and it seems that the drops are caused by the CPU reducing the frequency to 800Mhz due to thermal issues. Besides me being unable to play any more demanding game Im also worried about the life of laptop components...
The only way I was able to stop this is to use ThrottleStop application and reducing the multiplier to obtain lower frequency. It stops throttling at 3.0Ghz but the temperatures remain as mentioned before. Still I think I should be able to use full power of a brand new machine not to mention such high temperatures IMHO affect the hardware during longer period of time.
Now, is there anything I can do to fix this? If you guys need anymore information, please do not hesitate.
Looking forward to your answer.
P.S the temperatures where checked during gaming (in windowed mode) with CPU-Z, GPU-Z, CoreTemp and the built-in hardware monitor in ThrottleStop. They vary a little bit but these are neglectable differences. I also raised the back of the laptop to provide better ventilation, it may have same effect but it's insignificant.Most likely the heatsinks aren't seated properly or the heatsink compound wasn't applied correctly.
This is fairly common, and I had the same problem with my GT70 0NE when I purchased it.
It's fairly easy to remove open the bottom of the laptop up, remove the heatsinks and clean and re-apply the thermal compound, and then re-seat the heatsinks. Takes maybe 30 minutes if you're slow and careful like me.
If you don't feel good about doing it, then I suggest doing an RMA.
>>How to contact MSI.<<
ALSO, as long as you don't screw anything up inside the laptop, the warranty will still be good. Don't worry about the sticker on the bottom. It's mainly there to keep people from opening it up, but you have to be able to in order to add more memory or another HDD/SSD. -
GE70-20D Massive fps drops. Serious problem.
Hello evryone. I have a big problem with my MSI Ge70-20D (i5-4200m 2.5ghz+ gtx760m + 8 GB ram).
The problem is a fps drops in League of Legends. Its so weird because when my game started (00:00-1;50) i have maybe 140-160 fps, but in next 2-3 min i have 90-120 fps. Okey it could be fine but, when i use my some spell i my fps drops from 100-40-50 and screen hm freeze or make a slowly for a sec. Its happening in diffrent situation. When i put first ward/when i get lvl up etc. Its so boring ,and people who play in lol know this.
The next problem is in BIG teamfightas when on screen we can see a Lot of Minions a lot of ACTIONS (spells /ultimates like malph yasuo and other champion which make a chaos on screen, my fps drops to 30-40 fps and i rly can't play with this.
I tried to find help in league of legends support but nobody helps me. I tried in nvidia forum but nobody helped me.
And sad thing is i spend a lot of money for this notebook and it :censored:ed up. My friend have a dell inspirion with gt820m (lowest gpu than me , and i5-4210m 1.7ghz cpu [also lowest than my] ) and he have constant 100-120 fps even on the screen we can see a lot of action. So tell me HOW ? How my msi ge70 is so bad.
I checked my temperature. They are good. (55-65 C) in game with cooler booster and 65-70 with no cooler boster [after a long game].
I have the latest drivers! Even i make a re-install system i still have this issues. I turn off vsync of course. Changing a setting for low/medium/high in game dont solve problem.
I have all netframework and ccc redistuable. I have a maximum perfomance in setting of power managment. My gpu can be broken?
PLEASE HELP SOMEONE.Hi there,
Is your 8GB ram on only one pcs and run single channel? I mean two pcs of memory and let system run in dual channel can improve the performance.
And did you install game on SSD? That will also improve it.
Following is the suggestion I found from other post:
1. Memory is occupied by Killer process. Task manager shows RAM is 100% in use. And this problem can be resolved by updating new driver from MSI website. Or below link:
https://drive.google.com/file/d/0B1oSMeecH6wcUGlCTWFOd3lhTWc/view?usp=sharing
2. HDD is occupied by contents index or removing language packs process. We suggest user to check FAQ 740 and FAQ 646 for this two problems.
FAQ:740
When WINDOWS 8 OS is in idle mode, HDD usage often reaches 100%.
http://www.msi.com/pic/faq/10011896@2014-0415-1218-528636@faq_0000000000740_en.pdf
FAQ:646
http://www.msi.com/faq/nb-646.html
3. System didn’t use dGPU to run games. We knew that some of LOL old patches couldn’t start the game with auto select dGPU. User has to enter Nvidia control panel and assign the program to run dGPU.
4. When playing some games, game lags might happened due to the hard disk's power saving function. Also the hard disk's sounds might appeared due to the fast read/write tasks from the system. You can follow the instructions and try to turn off the power saving and acoustic management function of your hard drive to avoid game lags and try to decrease hard disk's sound.
http://www.msi.com/faq/nb-977.html
http://www.msi.com/pic/faq/10011971@2014-1003-0401-014968@faq_0000000000977-en.pdf -
MSI GE70 FPS Drops + Lag Spikes
Hey there everybody and msi's readers.
My problem is :
I bought my MSI GE70 one month ago ( i7 4700 HQ, GTX 860M )
I'm a League of legend player, and a CSGO player. I bought this laptop either for playing games and working ( using autocad and other construction stuff )
By the way, Since i get it, when i'm playing CSGO every minute or about, i got my laptop heavily lagging but my ping still at 30. I suppose, FPS Drop ( i already read a subject about it on this forum, i tried to put the thing @ 99% instead of 100% and trying to see if there was nothing running on the background that may give me these fps drops, by the way it didnt change anything )
The second point thats not on CSGO, on League of legend, every minute too or about, i dont got any fps drop but a heavy lag spike during 2/3 seconds, then the ping comes back to normal.
I'm a bit worried about it, there probably might me something to do on my laptop to fix these but i'm not an expert on it so please if anyone got any solutions can you help me ?
By the way, on the post that i read about someone having the same problem on CSGO, he was using a program that gave him his FPS, his GPU's heat and others stuff, may i have the program name please so i can give you more information on what happen when FPS Drop arrives on CSGO.
Thanks everyone who provides me help
And sorry for my english, i tried make it as clearly as i could by the way i'm not english .
If anyone that can help me about this dont understand what i mean in some points please ask me i will be pleased to answer for any helps hahai saw your post and i'm going to try it as soon as i can ( probably tomorow night ) but i got a question, i got FPS Drop on CSGo ok, thats a problem many guys have with msi's GTX 860 M GPU ok meh, i also got something on League of Legend, i got a heavy lag spike ( about 300 ms ) during 3 / 4 seconds, then its coming back to 40 ms. Should i also try out, by reducing my GPU's temperature ( as you did in your post ) and try to see if it may do something for my League of legend lag spike aswell ? or might this come from an other problem on my laptop ?. i already tried to get Killer Lan network last update and it didnt change anything. I checked all of my drivers update about internets ( wifi card etc... ), all is updated. By the way, my lag spikes frequency goes as my FPS Drops on CSGo, about every 1 / 2 minuts, i just wonder, if it comes from my GPU, why on CSGo i got fps drop because gpu is hot meanwhile on League i got lag spikes to manifest my gpu's overheating ? Strange thing.
To be honest the heavily thing i'm mad of is that i played before on a Toshiba, with a simply cuda nvidia GPU, intel core i5, i had 30 fps on league of legend but never had any lag spikes. I also had 40 / 50 fps on CSGo but never had any problems like fps drop. I wonder why the hell are these MSI called " Gaming laptop ", if with a simple working notebook that may be only viable " for working on microsoft word " i got less problems ( A simple toshiba notebook by the way that cost 1/3 of this MSI's price . )
By the way panni i'm going to try your idea out tomorow and i'll tell you the result as soon as possible for CSGo.
Anyway if you got an other idea to help me for my lag spikes on league of legend i would be happy to hear you you'r free to PM me or we could even talk ( skype / teamspeak ) if you got something for me.
Thank you very much for your precious help -
MOVED: MSI GE70 FPS Drops + Lag Spikes
This topic has been moved to MSI Notebooks & Netbooks.
https://forum-en.msi.com/index.php?topic=182574.0i saw your post and i'm going to try it as soon as i can ( probably tomorow night ) but i got a question, i got FPS Drop on CSGo ok, thats a problem many guys have with msi's GTX 860 M GPU ok meh, i also got something on League of Legend, i got a heavy lag spike ( about 300 ms ) during 3 / 4 seconds, then its coming back to 40 ms. Should i also try out, by reducing my GPU's temperature ( as you did in your post ) and try to see if it may do something for my League of legend lag spike aswell ? or might this come from an other problem on my laptop ?. i already tried to get Killer Lan network last update and it didnt change anything. I checked all of my drivers update about internets ( wifi card etc... ), all is updated. By the way, my lag spikes frequency goes as my FPS Drops on CSGo, about every 1 / 2 minuts, i just wonder, if it comes from my GPU, why on CSGo i got fps drop because gpu is hot meanwhile on League i got lag spikes to manifest my gpu's overheating ? Strange thing.
To be honest the heavily thing i'm mad of is that i played before on a Toshiba, with a simply cuda nvidia GPU, intel core i5, i had 30 fps on league of legend but never had any lag spikes. I also had 40 / 50 fps on CSGo but never had any problems like fps drop. I wonder why the hell are these MSI called " Gaming laptop ", if with a simple working notebook that may be only viable " for working on microsoft word " i got less problems ( A simple toshiba notebook by the way that cost 1/3 of this MSI's price . )
By the way panni i'm going to try your idea out tomorow and i'll tell you the result as soon as possible for CSGo.
Anyway if you got an other idea to help me for my lag spikes on league of legend i would be happy to hear you you'r free to PM me or we could even talk ( skype / teamspeak ) if you got something for me.
Thank you very much for your precious help -
I updated my bios to the latest and updated firmware to the latest version but when turbo boost is open ( max processor %100) mouse lag occurs in games but there is no fps drop.For example, when i shift my mouse to left for change the direction of game character mouse doesnt' t responds quickly.Problem can be solved by set max cpu to %99 but i want to use turbo boost.Anyone can help me please?Thanks.
Quote from: Svet on 04-November-13, 23:10:44
can you flash to the latest BIOS .512
http://www.msi.com/product/nb/GE70-2OE.html#download
then to retest?
what VGA drivers you use?
Nvidia 331.65
It says bios .512 is for windows 8.1 my os is w8.Is it makes any trouble? -
[TUTORIAL] GE70 2OE Installing Windows 7 (OS CHANGE)
Hello Forum,
Here is my very first post on this forum... but I wanted to share my experience with switching OS on the new GE70 2OE-015NL (as the product name says, I'm from The Netherlands )
I bought my GE70 and immidiately wanted to switch my OS to Windows 7... I owned a Dell Vostro 1700 Series and OS switches were never a problem on that notebook... as soon as i started with the OS change I ran into some problems that were difficult for me to fix (I'm not an expert) There were almost no tutorials to find about this, but I managed to fix it!
Before I figured out what to do, I called MSI Support so they could tell me if I could safely remove the BIOS_RVY partition etc. but as soon as I got someone on the phone and I told him that I already deleted the Windows 8 partitions and didn't get Windows 7 to install he began shouting that MSI doesn't support OS changes and that I had to send an email to their tech support so they could decide later on if they would help me or not.... I didn't ask for anything, I only wanted to know if I fkd up my new Notebook or that it would be repairable... a BIG for the MSI Tech Support! After I called I immidiately googled if it was safe to delete the BIOS_RVY partition but there were no such forum posts that I could find.. Therefore I decided to make this post!
REMINDER: this tutorial is for those that find it difficult or are scared to change their OS without knowing what's going to happen.. I had to figure this all out on my own and therefore I want to help other people with similar problems! So maybe it's a bit noob for this forum I don't know.. but please don't hate because of that! ^^
WARNING: THE INSTALLED OS MUST BE A 64-BIT VERSION, ALSO I'M NOT RESPONSIBLE FOR ANY DAMAGE YOU CAUSE TO YOUR NOTEBOOK/NETBOOK!
It is also recommended that you download all the drivers for Windows x64 before you install Windows because the network card won't work because of a lack of drivers so you need a second PC with a USB or you download them before the OS switch and put them on a USB.
Step 1: Make a bootable DVD/USB with Windows 7 x64 ISO on it, this can be done with Rufus for USB Flash Drives or PowerISO for DVD's! (I'm sorry I'm not allowed to post external links so you will have to google it )
Step 2: Restart the PC and when the text MSI pops up you press the DEL (numpad " . " key) and you will get into the BIOS Menu
Step 3: Go to the BOOT tab and select Boot Mode (or something similar) and change the Boot Mode from UEFI to Legacy
Step 4: Now you're Windows USB/DVD should be bootable (Microsoft says that Windows 7 supports UEFI Boot but I tried using multiple ISO's on different USB's and DVD's with different write speeds etc. but I didn't get Windows 7 Setup to boot beyond the 'Starting Windows' screen)
Step 5: When Windows 7 Setup is Booted select your country settings and time format and don't select the Upgrade option but the Custom (advanced) option to install Windows 7.
Now it's getting a bit difficult for most of us... Windows 7 Booted in a Legacy Boot Mode does not support GPT (Guid Partition Table) Disks, those can only be writed upon in UEFI mode. So now we need to change the Disk Partition Table to MBR (Master Boot Record). When you're at the partition menu, format and delete all partitions (yes don't worry you can safely delete all the partitions (when deleting the BIOS_RVY partition the F3 Hotkey function won't work anymore but we don't want that because it will recover Windows 8 but we hate that OS.. that's why we want to change to Windows 7!)
Step 6: Now that all the partitions are deleted on the disk, we can openup CMD this can be done by pressing SHIFT+ F10 in the partition menu of the Windows 7 Setup.
Now type the following commands:
Diskpart
List Disk
Select Disk # (probably 0, because the most notebooks only have 1 HDD)
Convert MBR
Now your HDD is converted to a MBR Partition Table
Step 7: Make a new partition (or more, depends on how much storage you have and want on your C:\ partition, Windows will automatically make some System partition(s))
Step 8: Select the partition on which you want to install Windows 7 and let it install! the MSI GE70 2OE supports Windows 7 x64 so all the drivers for that OS can be downloaded at the MSI website, product info (GE70 2OE) and then downloads -> Drivers.
Step 9: Install all the drivers and you're ready to go!
I hope I helped you with this problem, for me it was kinda hard to figure out that you could safely delete all the partitions on the disk without screwing up your PC.. So I hope I gave you some confidence with doing so after reading this tutorial!Quote from: CanesBridge on 06-August-13, 00:02:42
Hey man
I did this on the new msi ge60 2oc 014ne, which should be pretty much the same. Almost everything seems fine now except for two things.. I still cant det the wireless network adapter working, even though the ethernet works and Ive installed all drivers i could find. Do you have any idea what to do?
Second thing, in the Windows experience index, it gives my graphics card the grade 5.1, but it should be around 7. I installed the nvidia driver and all, so it doesn't really make sense to me... Any suggestions? Thanks!
Oh yeah, and the big foot boot agent message that shows up every time i boot the machine, i cant make it go away... I click shift + f10, clicks disable message and f4 for save and quit.. But it shows up again nemt time i boot... An annoying useless waste of time..
I guess it's pretty much the same indeed, do you have installed the Windows 7 x64 drivers for your wireless adapter or tried to install the Windows 8 ones? That could be the problem? If that's not the case and your ethernet is working, try checking for windows updates and see if it automatically installs the drivers for you? Make sure you installed the AzureWave Wireless LAN-NB114H driver that is available for your PC for Win7 x64, that driver as the name suggests is for wireless connection. Killer Bigfoot LAN is just for boosting your card so it's faster over LAN but the AzureWave makes the wireless connection available.. It worked for me so it should work for you?
If you did this all, try reinstalling it.. If that doesn't work, try formatting al partitions again en reinstall Windows 7 and start with a clean install...
About the videocard rate.. If your having problems with low FPS during gaming (maybe lower than normal) make sure you have installed the MSI driver for your graphic card (don't download it from the NVidia website) If you don't know, you can find all drivers for your device on the MSI website, Products -> Notebooks -> Gaming Series -> GE60 2OC -> Downloads
If the lower rate of the video card didn't cause low FPS I wouldn't worry too much if I were you
Oh, and about the Bigfoot Boot Manager.. I have the exact same thing.. I'm still figuring out how to get rid of it, but for now I went into the configure mode and set the message to disabled and the message time to 1 second (so that 1 second extra boot time isn't that bad..) If I found a solution to get rid of it I will let you know!
Hope I helped you, if not feel free to reply and ask again! We will figure it out together, or with help from someone else on this forum! -
I own a msi ge70 2oe ssd version.Turbo boost is not working.
Notebook is on high performance or balanced mode doesn't matter it only goes 2.4 ghz max.(Max gpu %100)I tested max cpu clock rate in Intel Processor Diagnostic Tool and cpu-z while playing battlefield 4.
Bios version 1757IMS.516
Firmware version 1757EMS1.506
Battery plugged and ac adapter plugged in.Quote from: darkhawk on 13-December-13, 10:05:06
The reason it probably goes to 3.x GHz right away and then drops rather quickly to 2.4 GHz is most likely due to heat. 97C is getting close to the Tmax for the processor, and it's probably throttling back the CPU in order to keep it from being hurt.
Most likely you need to open the notebook up and replace the heatsink compound on the CPU and GPU (89C is rather hot IMHO for the GPU).
Or you can contact MSI and do an RMA.
>>How to contact MSI.<<
So you are saying that there is no another solution for this issue? -
GE70 2OE starting to get quite annoyed
Hi! i have a Ge70 2oe and im getting just more frustraded every day cause it feels like something is wrong with my computer. I play one game World of warcraft which everyone know doesnt need that much from the computer to run well.
My friend runs on high with a asus laptop with i7 generation 2 and a gtx560m and playing with like around 50 fps. I with my i7 generation 4 and gtx765 i have to run at low to have same as him. Is this computer that bad? i mean i have in my world better gpu and cpu and everything so mine should run it better than his but no it doesnt, Is it something i have to do to make this work?
have a nice day.Quote from: christian.brandt.1610 on 30-October-13, 01:24:31
Hi! i have a Ge70 2oe and im getting just more frustraded every day cause it feels like something is wrong with my computer. I play one game World of warcraft which everyone know doesnt need that much from the computer to run well.
My friend runs on high with a asus laptop with i7 generation 2 and a gtx560m and playing with like around 50 fps. I with my i7 generation 4 and gtx765 i have to run at low to have same as him. Is this computer that bad? i mean i have in my world better gpu and cpu and everything so mine should run it better than his but no it doesnt, Is it something i have to do to make this work?
have a nice day.
Are you certain you're using the NVidia dedicated GPU and not the Intel? That is really what it seems like.
What are your temperatures? Maybe they're very high and causing the computer to not run optimally. Get the temperature of your GPU by using MSI Afterburner, and for your CPU use Coretemp. -
MSI GE70 2OE-012NL lost Turbo Boost after updating firmware? (or not)
Read EDIT2
Hi,
I just found out about the 2013-08-15 firmware update (version 1506) for my MSI GE70 2OE-012NL.
After flashing this, my cpu load doesn't go over 99% and max speed is around 2.38GHz. Before it had peaks to 3.40Ghz because of the Turbo Boost. (tested with Intel's Processor Diagnostic Tool)
Any insight on this?
EDIT: speed reduction is very noticable in applications like AutoCAD/REVIT/Cubase (rendering) and games (Battlefield 3 automatically threw me back to 'low' profile in graphic settings where it was 'high' before).
EDIT2: it's going up to 3.29Ghz again with a new test in Intel's Processor Diagnostic Tool. Weird. Nevertheless I would like to know what the differences are.Quote from: darkhawk on 13-December-13, 10:05:06
The reason it probably goes to 3.x GHz right away and then drops rather quickly to 2.4 GHz is most likely due to heat. 97C is getting close to the Tmax for the processor, and it's probably throttling back the CPU in order to keep it from being hurt.
Most likely you need to open the notebook up and replace the heatsink compound on the CPU and GPU (89C is rather hot IMHO for the GPU).
Or you can contact MSI and do an RMA.
>>How to contact MSI.<<
So you are saying that there is no another solution for this issue? -
Hello all,
I'm new to MSI notebooks and just bought MSI GE70 2OE.
I just had some problems with Windows updates and started facing performance drops and Windows Explorer started restarting for no reason.
So I decided to use recovery via F3 button. But when I enter into the recovery it asks me for recovery media eventhough I didn't touch any partition and drive names.
I checked this on MSIs site and found w w w. m s i. c o m/faq/nb-933.html this page.
But the link for the fix file doesn't work anymore. If anyone can share it with me it will be huge help.
Thank you in advance.This doesn't seem right at all, but is the same as the behaviour I'm seeing with the latest drivers. All the three performance states have the same settings. I guess P0 is what the driver activates when it wants to run full speed, ie 405 MHz in my case. Using GPU Shark I can see that the driver switch to P0 when starting a game.
I currently have the older driver from msi.com loaded, 310 something. This driver seems to disregard the P-settings, but has the problem that it sometimes between 135 and 901MHz several times per second when playing.
GPU Shark v0.7.5
(C)2013 Geeks3D - www.geeks3d.com
Elapsed time: 00:07:20
OpenGL memory - total:2048MB, usage:269MB
GPU 1 - GeForce GTX 765M
- GPU: unknown
- Bus ID: 1
- Device ID: 10DE-11E2
- Subvendor: MSI (1462-10E1)
- Driver version: 9.18.13.1229
- NV driver branch: r310_00-545
- OS: Windows 8 64-bit
- Bios version: 80.06.5d.00.09
- GPU memory size: 2048MB
- Bus width: 128-bit
- GPU memory location: GPU dedicated
- GPU memory type: GDDR5
- GPU temp: 45.0°C (min:33.0°C - max:51.0°C)
- GPU cores: 768
- Performance states: 3
- Performance state P0
- GPU: 405.0MHz
- Mem: 2000.0MHz
- VDDC: 0.868V
- Performance state P5
- GPU: 405.0MHz
- Mem: 810.0MHz
- VDDC: 0.868V
- Performance state P8 (current)
- GPU: 405.0MHz
- Mem: 405.0MHz
- VDDC: 0.850V
- True current clock speeds / VDDC:
- Core: 135.0MHz
- Mem: 405.0MHz
- VDDC: 0.850V
- GPU and memory usage:
- GPU: 0.0%, max: 74.0%
- GPU memory: 13.1%
- GPU memory controller: 0.0%
- Limiting policies (NVIDIA):
- no limitation
- Current active 3D applications:
---- gpushark-0.7.5.exe (PID: 5636)
---- worldoftanks.exe (PID: 3400) -
GE70-2OE -- Issues + Tweaks for n00bs
All,
I just got my GE70-2OE with a GTX 765m for gaming on the road
I have been tweaking it and have the following questions:
1 - I immediately reinstalled Windows 7. I don't care what ANYONE says, Windows 8 is horrid. I tried to give it a chance but between all the bloatware and other interface issues, I just don't care for it. Are many users here running Windows 7 instead of 8 on their gaming notebook?
2 - Overall gaming performance is pretty nice at 1080p but this graphics card seems more geared towards a 1600x900 resolution. My biggest issue is, some games, like Grim Dawn, seem to be defaulting to the Intel Video instead of the NVIDIA. I am only getting like 10-15 FPS in that game where I get 120+ on my desktop NVIDIA card. Other games, it goes to the NVIDIA and performance is fine. Any tips? Is there a way to specify Integrated or discrete video? (PS - I am plugged into power)
3 - On the sound card, it's a Realtek sound card but the Sound Blaster Cinema software works with it -- Am I missing something?
4 - What does the unlocked GE70 BIOS allow you to do exactly?
5 - Any other tips, tweaks or tweaks for advanced users for this model?
Thanks in advance!Quote from: digitalforceq on 09-March-14, 00:40:50
Found my issue on Grim Dawn. I had to hard set the GPU in the NVIDIA control panel. Works fine now
I am still curious on a custom BIOS, etc. Also, how do I toggle the keyboard backlight on this model?
Talk to Svet/post in the custom bios sub-forum here. It will require a donation for Svet's time, but he can do it.
I'm not sure that all the GE70 models came with a backlit keyboard.
Does the backlight come on when you first power the notebook on? If it doesn't it probably didn't come with the backlit keyboard. -
MSI GE70 2OE-201TR Wireless issue
Hi friends , I have a problem with my Msi ge70 2OE-201TR . My wifi connection drops randomly. then at right bottom , there is ! on wifi connection symbol. I can reconnect internet if I disconnect from network and reconnect. Are there any solve for this problem ?
the solves that i tried :
1-)Updated wifi drivers
2-)Disable killer network system or enable and update killer network
3-)changed my router settings
3-)updated bios
4-)tried manual Ipv4 setup
System Information
Time of this report: 11/12/2014, 14:55:15
Machine name: Tolga
Operating System: Windows 8.1 Single Language 64-bit (6.3, Build 9600) (9600.winblue_r3.140827-1500)
Language: Turkish (Regional Setting: Turkish)
System Manufacturer: Micro-Star International Co., Ltd.
System Model: GE70 2OC\2OD\2OE
BIOS: E1757IMS.51E
Processor: Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz (8 CPUs), ~2.4GHz
Memory: 16384MB RAM
Available OS Memory: 16304MB RAM
Page File: 2642MB used, 30045MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.03.9600.16384 64bit UnicodeQuote from: DragonSlayer;114769
Help please
The Killer network stuff isn't part of the Wifi. I have a 2OE mine is a realtek pci-e card. It's located under the bottom cover toward the side the lan cable plugs into. (if you decide to upgade it to a AC capable card) Try updaing those drivers. Right click the start button on the desktop, hit device manager, expand network adapters, the wifi card will be listed there. The drivers are on the MSI site where your laptop version is under support downloads. First try right clicking the wifi icon when it's hooked up. Hit open network/sharing, left click the wifi network, at the bottom hit proerties, at the top hit configure, the last tab is power uncheck let puter turn off to save power.
Maybe you are looking for
-
CAF and custon data source in CE 7.2?
Hello, is it in CE 7.20 possible to use the CAF Framerwork with a custom JDBC data source instead of the system data base? Best Regards Sebastian Edited by: Sebastian Lenk on Mar 2, 2011 5:25 PM
-
I was looking into getting a tv tuner for my macbook. I have read alot of reviews about a couple products. I have seen both good and bad. Has anyone had success with a certain one? What one do you think is the best?
-
Javascript validate date format?
i cant figure out how to check the format of the date, i want it to check that the date is dd/mm/yy if(document.getElementById(i+"eddstartdate").value == ????) window.alert('You Must Enter a Start Date with a valid
-
Hi, i am following the below metalink notes which suggest to export and import first without rows and change the nls_length_semantics from byte to char and import with data. but i can see around 72 temporary tables created and not delted. does import
-
Saving data at a fixed interval
Currently I have my block diagram set up so that after every n number of loops, the data will save. I'm using the remainder function and case structure for this, and while this works I want to make it save at certain time intervals instead of loop.