Ge70 2OE Laptop with window 8.1 Pro installed unlock virtualization via bios

I have installed windows 8.1 pro on the c: drive over the original window 8.
I was told in order to enable virtualization I had to update my bios .
I went to the site of msi/downloads and went to ge70 2OE and downloaded the bios update for windows 8.1 no raid..
I did exactly what the help file told me to do. I went just as in the screens.
I went to the bios but the version number (2.15.1236) was still the same.  Also virtualization was still not enabled .
What is here the problem. I it windows 8.1 Pro?. Or did I do something wrong in the process?

Hi,
Thanks for posting in the forum.
Regarding your current issue, maybe we could refer to the following similar thread. It may be useful to us.
Windows 8 does not go to sleep - how to identify the device/app preventing sleep
http://social.technet.microsoft.com/Forums/en-US/a4a7cc99-a49a-42a8-b2af-aff748623c34/windows-8-does-not-go-to-sleep-how-to-identify-the-deviceapp-preventing-sleep
In addition, please use the method below to narrow down the cause of the issue.
How to Find Out What's Keeping Your Computer from Going to Sleep
http://lifehacker.com/5924010/how-to-find-out-whats-keeping-your-computer-from-going-to-sleep
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support

Similar Messages

  • Itunes not compatable...I have a new laptop with Windows 8, I have installed the most recent download 11

    What do I need to install for itunes to be compatable with Windows 8. 

    Why do you believe it is not compatible?
    Is there an error message?

  • Old printer newer laptop with windows 7 home premium installed

    Hi.... I have a toshiba Satelite laptop that at one point had Microsoft office home and student2007 installed. Due to some difficulties I had with my laptop I had it fixed and they installed windos 7 home premium now.  Now my HP Photosmart C5280 All-In_One printer will not work. PLEASE HELP ME IF U CAN>  Thank you The printer use to work GREAT until windows 7 was installed.

    Hi,
    Please download the following software and drivers then install to your Windows 7 computer(s):
        http://ftp.hp.com/pub/softlib/software11/COL30099/mp-74848-1/PS_AIO_02_NonNet_Full_Win_WW_130_140.ex...
    The file is over 300Mb, this may take a while to download:
    Release details
    Released:2009-10-20
    File name:
    PS_AIO_02_NonNet_Full_Win_WW_130_140.exe [1/1, 311.96M]
    Version13.1.0
    Compatibility:
    Microsoft Windows 7 (32-bit)
    Microsoft Windows 7 (64-bit)
    Microsoft Windows 7 Home Basic (32-bit)
    Microsoft Windows 7 Home Premium (32-bit)
    Microsoft Windows 7 Professional (32-bit)
    Microsoft Windows 7 Enterprise (32-bit)
    Microsoft Windows 7 Ultimate (32-bit)
    Microsoft Windows 7 Home Premium (64-bit)
    Microsoft Windows 7 Professional (64-bit)
    Microsoft Windows 7 Enterprise (64-bit)
    Microsoft Windows 7 Ultimate (64-bit)
    Microsoft Windows 7 Home Basic (64-bit)
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Can i use a thunderbolt display for my macbook pro and hp laptop with windows 7 and what adapters will i need

    Can i use a thunderbolt display for my macbook pro and hp laptop with windows 7 and what adapters will i need

    Hi jayhrab,
    Currently, the system requirements listed for an Apple Thunderbolt Display are:
    Thunderbolt-enabled Mac computer, including MacBook Air, MacBook Pro, Mac mini, and iMac
    OS X v10.6.8 or later
    Apple - Thunderbolt Display - Read the tech specs.
    Regards,
    - Brenden

  • How do I set up wireless printing of my Officejet Pro 8500 on a laptop with Windows 8?

    How do I set up wireless printing from my all in one Officejet Pro 8500 printer to my laptop with Windows 8?

    You can set up your printer for wireless pretty easily if you have the Full Feature Software installed on your computer for your printer.  The setup is done as part of the installation.
    Read through below, then select how you wish to proceed.  There is a video to assist - see below!
                                                               Install Printer Driver / Software
    If your printer stops working (and it’s not a hardware problem), it may be due to software or driver issues.  There are tools to help you diagnose the problem and help documents to guide you to success. 
    You might just desire extra features for your printer, or need extra tools to help with scheduled maintenance.
     In many cases, you can (re)install the Full Feature Softwarefor your printer to enhance its capabilities.  The HP Solution Center is an integrated part of the FFS.  For e-print, you will want the e-print software.
    If you have the CD that came with your printer, use that to install your Printer software  -- IF the CD is compatible with your current Operating System.  If you do not have the CD, or if the software on the CD is outdated, then you can use the online installation tools.
    (Re)install the basic driver or HP Printer Full Feature Software or other software for your printer:
    Drivers control hardware connected to the computer (wired or wireless)
    Software controls the programs that interact with the User
    Go to the top of the forum page to Support and Drivers
     Officejet Pro 8500 Series
    Enter your Printer Model information, and then go to Software and Drivers...
    Enter your Operating System in the Drop-down menu...  Click NEXT and Scroll down
    Look for category Driver - Product Installation Software
    Select the appropriate Basic Driver, e-print, or Full Feature Software, as appropriate
    NOTE:  You may also wish to download the Print and Scan Doctor and / or other Tools from Category - Utilities
    Save the *.exe installation package(s) on your computer
    Pay attention to the name and the location of the file(s) when you save the file(s).  The file(s) will likely save to the "Downloads “folder.
    You may remove your existing printer software with the following tool.  Fixit is of particular use when the existing printer software is being replaced due to severe problems with the printing program.
    Fixit -- Fix problems with programs that can't be installed or uninstalled
    NOTE:  If you have a recent working version of the Full Feature Software on your computer, you may opt to skip removing the existing printer software in the above separate step.  During installation of your Full Feature Software, when the installer package detects the “old” printer software on your computer, the program will ask you to remove that old software:  The program will then invoke an internal printer software removal program that is written to remove printer software.  Once most of the old printer software is removed, you will be asked to Reboot your computer and log back in.  After you log in, the final bits of the old printer program(s) are deleted and the new software will be installed.  Depending on your system, the whole uninstall and install process might take as much as eight to twelve minutes.
    Remember to Install the programs from Category Utilities first, if applicable, as these are smaller in size.
    Install the downloaded Printer Software package last.
    If you have ‘Admin’ control, you may highlight the package and “double-click” to install it, else Right-Click, Select ‘run as Administrator’ and install.
    NOTES: 
    If using: Download and install the driver software before connecting a USB cable.
    After the initial installation is complete, be sure to check for and install any relevant updates  - check Category  - Update.  The Updates are important and can mean the difference between software that works as expected and software that does not work.
    You may also wish to check for a Category named Firmware.  Installation of any package in this Catagory is personal choice and must be based on the contents in the package and whether or not your printer is working as expected.
    Extra help for setting up your Wireless Printer:
    Reconfiguring your printer
    Troubleshooting Your Printer - Network
    Video Help for installing your Printer:
    Downloading and Installing a Full Solution Driver in Windows 8 Using a Wireless Connection
    Kind Regards,
    Dragon-Fur

  • Trying to install CS5 on new laptop with Windows 8 pro. Keeps telling me to close Google Chrome when it's already closed.

    trying to install CS5 on new laptop with Windows 8 pro. Keeps telling me to close Google Chrome when it's already closed.

    Terminate the relevant processes in task manager, including the Google updater service.
    Mylenium

  • New laptop with Windows 7

    I just purchased a new laptop with windows 7 and trying to get my library from my iphone 3G on my new computer? How do I do it? It is all gray'd out when
    I plug in my iphone, and nothing was moved over to my library. Help!

    Satellite P775-S7164
    Downloads here
    This has been a problem since purchased new about 8 months ago. It takes 5+ minutes just to boot up the toshibia.
    The short answer is that you should have returned the computer immediately.
    Just to make certain it's not due to software, restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. See the instructions in the section Recovering the Internal Storage Drive, which begins on p. 62 of the User's Guide.
       Satellite/Satellite Pro P700 Series User’s Guide
    Best to create recovery media in advance in case something goes wrong.
    -Jerry

  • Can't get adobe reader to install on my new laptop with windows 8

    I can't get adobe reader to install onto my new laptop with windows 8. Basically what happens is that I start the download from the adobe screen by clicking the yellow download button, then I click run (I've also tried save and run), then I allow the program to make changes to my hard drive, and then finally a blank grey box appears in the in the middle of the screen, titled "adobe reader installer". After this box appears nothing else happens. I've let it sit for at least 30 minutes and still nothing. I've also disabled my pop up blocker, and set the security settings to default as suggested in other posts. Unfortunately this is the only pdf program that works for the site we have to use to write contracts, so I need to get this figured out asap. Thanks in advance for any help and advice.

    Try installing from http://get.adobe.com/reader/enterprise

  • I have just bought a new laptop with windows 8 and when trying to load itunes was told it was incompatible. Can anyone tell me what I can do to put itunes on my computer? thank you

    I have just bought a new laptop with Windows 8 and cannot load itunes from the existing disc or online as it is incompatible.Can anyone tell me what I can do now to get itunes on to my computer? Thank you

    See the futher information area of Troubleshooting issues with iTunes for Windows updates for download advice and direct links if required.
    See this migrate iTunes library post for advice on moving the library over from a previous computer and this post on deduplication.
    tt2

  • I have an airport extreme.  i am trying to connect a laptop with windows 7 to a wireless printer, with no luck.  any ideas?

    I have an airport extreme.  i am trying to connect a laptop with windows 7 to a wireless printer, with no luck.  any ideas?

    The problem is not the router.. the issue is the vpn has put your computer in a different IP range with a different gateway. When you turn off the vpn the computer returns to local lan and can print.
    Some vpn software allows you to set gateway to use local net instead of remote gateway or access to other webistes or local lan.
    Read up the issue.
    http://stevejenkins.com/blog/2010/01/using-the-local-default-gateway-with-a-wind ows-vpn-connection/
    Cisco vpn client..
    https://supportforums.cisco.com/thread/239113
    I did not search much.. just grabbed the first article I could find that explains the issue.
    The whole point of the vpn is whilst it is connected your computer is NOT part of the Local Lan .. it is part of the Remote LAN via the vpn tunnel.
    It is also a security risk using split tunnelling so often it will not be allowed.
    Plug the printer directly into the computer via usb or whatever.. Local connection will work.. not local lan.

  • I am trying to install itunes on my hp laptop with windows vista 64 bit. But when i install i get this error "An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32"version="8.0.50727.6195".publickeyTOken="1fc8b3 b9a1e18e3b".

    I am trying to install itunes on my hp laptop with windows vista 64 bit. But when i install i get this error   "An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32"version="8.0.50727.6195".publickeyTOken="1fc8b3 b9a1e18e3b".processorArchitecture="x86""

    Repair your Apple Application Support.
    Control Panel > Programs n Features > highlight AAS, click CHANGE the REPAIR

  • Have photoshop 6 on a dead pc laptop with windows XP.  Have a pc laptop that has been upgraded from Vista 64 bit (where photshop wouldn't install) to windows 7 professional 32 bit (clean install).  Photoshop still won't install. Also having reinstallation

    I have photoshop 6 on a dead pc laptop with windows XP.  Have a pc laptop that has been upgraded from Vista 64 bit (where phootshop 6 wouldn't install) to windows 7 professional 32 bit (clean install).  Photoshop still won't install. Also having reinstallation issues with pse6 on this same pc.  Pse6 was installed and working on vista 64bit version of the OS, now won't install on rebuilt windows professional 7 32bit (keeps giving me serial number not valid errors).  I'm not trying to pirate these programs.  Just want to reinstall them.

    you need,
    Windows 98, Windows 2000, Windows NT 4.0 with Service Pack 4, 5, or 6a, or Windows Millennium
    Microsoft Windows 98/Millennium/2000/NT 4.0 (Service Pack 4, 5, or 6a required)

  • HT1339 my ipod shuffle(1st generation) is corrupted (error 1442) it will not restore.             is it possible to correct this or is it beyond repair. It worked the last time I used it on my laptop with Windows Vista. Vista.

    My ipod shuffle (1st generation) will not restore. It says it is corrupted(error 1442) Is it possible to correct this problem, or is it beyond repair. It worked last  time I used it on my laptop with Windows Vista. Any help would be much appreciated.

    Im actually tilting it up where it cinnects to my iPod, not where it connects to my computer, and i have tried three(yes, 3) different cables, one of which i bought brand new. still nothing, and i've also tried different USB ports on my computer,....nothing. Could this simply be a hardware failure of somekind? maybe a physical problem...i mean, why would i have to tilt the cable in order for my computer to actually read my iPod? im looking at the USB connector on my iPod (maybe it's my imagination, not sure) it possible might be bent, the little metal part in the port.

  • My iPod classic won't charge. I just bought a new laptop with Windows 8 and when I plug in my iPod, iTunes will recogniandze it and will sync but after the syncing process ends the charging stops. Any suggestions?

    MyiPod classic won't charge. I just bought a new laptop with Windows 8 and when I plug in my iPod, iTunes will recognize it and sync, but will only charge during the syncing process. Any suggestions?

    rubicon53 wrote:
    I just bought a new laptop and my ipod nano will not stay connected to my computer.
    I cannot transfer any of my songs to my new laptop
    How to use your iPod to move your music to a new computer

  • Is HP Photosmart Premium all-in-one C309n-s printer compatible with Windows 8.1 PRO?

    Is HP Photosmart Premium all-in-one C309n-s printer compatible with Windows 8.1 PRO?
    Operating System:  Windows Version 8.1 PRO
    When I upgraded from Windows 7 to Windows 8.1, my HP Photosmart Premium all-in-one C309n-s
    stop working.  Is this printer not compatible with Windows 8.1 PRO?  Is there any update for this?

    Hey,
    HP Photosmart Premium all-in-one C309n/g printer is compatible for Windows 8.1
    Please uninstall your printer's old software then install new one for windows 8.1.
    HP Photosmart Premium All-in-One C309 Series Full Feature Software and Driver :
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-109711-1&cc=us&dlc=en&lc=en...
    Kevin_US_CA
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
    ***Click on "Thumbs up" button to the left side of my post to say thanks!***

Maybe you are looking for

  • Please help, my data usage is increasing and i dont know why?

    Hi, Iv had my blackberry for about 3 weeks and all was fine until yesterday. The data usage continuously increases even though im not connected to the internet or any applications. The only way i can stop the data usage increasing is if I turn the ph

  • Quicktime file not playing correctly

    My professor at school gave me a quicktime file link to view. When I open it plays but it skips and is unclear. Here is the link: http://www.onlinecampus.org/ref-mov/dept/arc/jorgensen/AETop10-sd.qtl Any help would be greatly appreciated. Thanks!

  • INSTALLING SSH IN SOLARIS 8

    Hello, I�m trying to install openssh in a Solaris 8 machine. I followed these setps: 1.- Install the patch 112438-03 and boot -r 2.- pkgadd -d openssh-4.4p1-sol8-sparc-local pkgadd -d openssl-0.9.6i-sol8-sparc-local pkgadd -d zlib-1.2.3-sol8-sparc-lo

  • Can we set List View Lookup Threshold at site collection level ?

    Hello, Presently, we have requirement to set the List View Lookup Threshold  at Site Collection/Sub-Site level instead of web application level. Could you please let me know, are there any ways to set List View Lookup Threshold setting at Site Collec

  • How do I stop iPhoto from launching?

    How do I stop iPhoto from launching? I usually find it's much easier to just use Photoshop to edit my pictures... iPhoto is slow as molasses in January. How do I stop iPhoto from launching everytime I connect my camera? I looked everywhere and can't