GE70 2OE win 8.1 upgrade

Hi,
I have a ge70 2oe and decided itd be time to go to windows 8.1 (since there were drivers available to download)
So I did a clean install of windows 8 (since I cant go to 8.1 instant because of my key )
and on 8 I didn't install drivers because I had the 8.1 drivers.
so I went to 8.1 that went succesfull but then. installing the drivers on 8.1 is a complete disaster. chipset drivers gives me bsod's. not everything works properly etc.
Any advice? should I stay on 8? can I use win 8 drivers on 8.1?
Thanks in advance
--Kalekip21

Quote from: Kalekip21 on 08-November-13, 16:34:05
Hi,
I have a ge70 2oe and decided itd be time to go to windows 8.1 (since there were drivers available to download)
So I did a clean install of windows 8 (since I cant go to 8.1 instant because of my key )
and on 8 I didn't install drivers because I had the 8.1 drivers.
so I went to 8.1 that went succesfull but then. installing the drivers on 8.1 is a complete disaster. chipset drivers gives me bsod's. not everything works properly etc.
Any advice? should I stay on 8? can I use win 8 drivers on 8.1?
Thanks in advance
--Kalekip21
There are a few threads regarding this.
The Intel Chipset drivers are a known issue for some reason. The best suggestion is to get them straight from Intel if memory serves right, instead of using the ones from MSI. Check the other threads about the Windows 8.1 upgrade, there is information there that can solve your problem.
Personally, I'd just forget Windows 8.1 and wait it out for a bit. It's been nothing but a huge mess for most users. It doesn't really add anything over Windows 8, which works fine.

Similar Messages

  • MSI GE70 2OE wins the "09/10 Fantastic" award by IGN

       Award link:    http://nl.ign.com/review/7174/msi-ge70-20e-review

    Hi! I´m gonna buy a MSI GE70 20E.
    It´s without operative system. What do u think is the best: windows 8.1 or windows 7 pro 64???
    It has 750 GB (7200 rpm S-ATA), to play games like civilization v or rome total war or Skyrim, do u think it´s important having SSD???
    Thanks a lot
    - - - Updated - - -
    Hi! I´m gonna buy a MSI GE70 20E.
    It´s without operative system. What do u think is the best: windows 8.1 or windows 7 pro 64???
    It has 750 GB (7200 rpm S-ATA), to play games like civilization v or rome total war or Skyrim, do u think it´s important having SSD???
    Thanks a lot

  • GE70 2OE Windows 8.1 upgrade problems

    Hi.
    Trying to solve my graphics problems that I asked about in another thread I have also tried upgrading to Windows 8.1. Upgrade always fails.
    I have read the information on msi.com about uninstalling the graphic drivers etc. I have also downloaded all the latest drivers for Windows 8.1 from msi.com and installed all of them, except the graphic ones.
    I have got four different errors so far.
    Sometimes the computer BSOD's with DRIVER_POWER_STATE_FAILURE when the installation are preparing all components in the computer. I have read that this might be linked to the WiFi card and that you should remove or disable it. Since I couldn't do either I tried updating the drivers for the WiFi. The problem disappeared, but has since reappeard a few times. It seems kind of random.
    Sometimes I get to a step where the installer says Preparing some more things (it says this in Swedish, so this is my translation). It gets stuck at 3% for a long time (I have waited up to 30 mins). When I restart the computer the old version of Windows is restored and I get either 0xC1900101-0x4000D or 0xC1900101-0x30018.
    What else can I try?

    I would either do a clean OS install or installed Windows 7.

  • GE70 2OE-002US (Install Win 7 Pro 64bit)

    Client has just purchased above laptop with Win8 64 bit installed but realized that he really would rather have Windows 7. With my help he found the Windows 7 drivers including chipset drivers for Win7 64 bit on the MSI website but after installing Win7 Pro 64 bit it appears that we can't install these drivers starting with the chipset ones.
    The error message we get is "This computer does not meet the minimum requirements for installing the software. Setup will exit.".  Does anyone have any idea what we are missing?
    Windows 7 was installed from an original OEM disk with SP1 integrated.

    Quote from: Svet on 16-September-13, 08:40:00
    double check what drivers you are trying to install, correct link:
    You nailed it, works fine, however this is a GE70 2OE-002US and I downloaded the drivers from the MSI link for that machine.  Have no idea why your link provided the right drivers and mine didn't...  Thanks a lot..

  • GE70 2OE possible upgrades

    Hi,
    im a proud owner of GE70 2OE. Currently ive got GeForce GTX 765M in this laptop. Can you guys tell me what is the best graphic card and CPU that i can get for this laptop and where i can get it?

    Don't think the graphic card is changeable.
    I think the performance is quiet well running most games.

  • GE70 2OE: How to successfully update to Windows 8.1

    Hi all.  I have successfully upgraded my MSI GE70 2OE (non-raid sku) to Windows 8.1.  It is a little bit of a headache, but I will cover what I did in order to get it to work*.
    1) Download Windows 8.1 from the Windows Store.  It will download and automatically install in the background.  It takes a little bit, depending on internet connection.
    2) While this is going on, download the appropriate Windows 8.1  drivers/BIOS/EC (MSI GE70 2OE. If you are using the raid sku aka a laptop that came with a Super Raid setup use the raid sku bios.  (Do this while the update is downloading).  Do not install these yet. (Note: THESE DRIVERS ARE FOR THE MSI GE70 2OE ONLY!)
    3) Download the MSI HQ USB BIOS Flash Tool.  You will need a USB flash drive/key for this portion.
    4) Right click on the BIOS file you downloaded and make sure it is unblocked.  Then unzip the BIOS file.  Follow this tutorial using "method 2: Processing a BIOS file directly".  This step will make a bootable USB key so you can flash to the Windows 8.1 BIOS.
    5) Once Windows 8.1 is downloaded, let it install.  Do not do any installing of drivers/BIOS/EC at this time.  Let Windows boot back to the lock screen.  Once it gets there, shutdown the laptop.
    6) Reset the EC using this procedure.
    7) Insert the USB key you created in step 4. Start the laptop.  Press the DELETE key during startup (before you see the MSI screen) to enter the BIOS.  Set the BIOS to boot from a USB key.  Exit and Save changes (F10).  Let the key update the BIOS. 
    8) Once this is done, allow the computer to restart.  Press the DELETE key to enter the BIOS.  Once you are in the BIOS, you can remove the USB key.  Change the options for boot back to the "UEFI: Windows Boot Manager" option. Exit and save (F10).
    9) Let the computer boot into Windows 8.1.  You will have to go through all the setup options you did when you first got your laptop.  I did not experience any loss of data, but YMMV.  If everything went correctly, you should not either.
    10) Once you are done with the initial setup, you can log in and start installing all your Windows 8.1 drivers you downloaded from MSI.  After EACH driver install, restart your computer.
    11) Once you are done with driver installs, shutdown Windows and do the EC reset procedure (discussed in step 6).
    12) (Note:  Before doing this step, make sure you save all work, as the computer will shutdown once this step completes).  Once this is done, reboot into Windows.  You now need to install the EC file you downloaded in step 2.  (This file will be listed under the Firmware section in the link I provided).  Once downloaded, right click the file, make sure you unblock it, then unzip the file.  You want to run the file in the folder "whatever you named the unzip location">1757EMS1.506>Win named Autoflash.exe.  Once this is complete, the computer will automatically shutdown.
    13) After shutdown, reset the EC using the procedure discussed in steps 6 and 11.
    14) At this point, you can now start up your computer.  Everything should be (tm) working correctly. 
    *I want to point out that this is the method i used and may not work for you.  If you attempt to do these things, you do so at your own risk.  MSI, myself, and the flying spaghetti monster are not responsible for any loss of data, malfunctioning hardware, or broken objects in your home that may result from using this procedure.  This guide is provided as is, with no warranty.  Void where prohibited by law.
    If you have any issues, I will attempt to help as best I can.  However, the above statement applies.

    You can't roll back the software.
    The key combination to take a screenshot changes to Power + Volume up in WP8.1.
    In order to troubleshoot the WiFi issue, you would need to provide more info on what happens when you try to connect. Is there an error message, for example?
    Uploading pics might be a problem in things like Facebook and Instagram if you only have a 2G connection, but if you have 3G or 4G then again give more info about what you try to upload to where and what happens and we can try to help.

  • [TUTORIAL] GE70 2OE Installing Windows 7 (OS CHANGE)

    Hello Forum,
    Here is my very first post on this forum... but I wanted to share my experience with switching OS on the new GE70 2OE-015NL (as the product name says, I'm from The Netherlands  )
    I bought my GE70 and immidiately wanted to switch my OS to Windows 7... I owned a Dell Vostro 1700 Series and OS switches were never a problem on that notebook... as soon as i started with the OS change I ran into some problems that were difficult for me to fix (I'm not an expert) There were almost no tutorials to find about this, but I managed to fix it! 
    Before I figured out what to do, I called MSI Support so they could tell me if I could safely remove the BIOS_RVY partition etc. but as soon as I got someone on the phone and I told him that I already deleted the Windows 8 partitions and didn't get Windows 7 to install he began shouting that MSI doesn't support OS changes and that I had to send an email to their tech support so they could decide later on if they would help me or not.... I didn't ask for anything, I only wanted to know if I fkd up my new Notebook or that it would be repairable... a BIG  for the MSI Tech Support! After I called I immidiately googled if it was safe to delete the BIOS_RVY partition but there were no such forum posts that I could find.. Therefore I decided to make this post!
    REMINDER: this tutorial is for those that find it difficult or are scared to change their OS without knowing what's going to happen.. I had to figure this all out on my own and therefore I want to help other people with similar problems! So maybe it's a bit noob for this forum I don't know.. but please don't hate because of that! ^^
    WARNING: THE INSTALLED OS MUST BE A 64-BIT VERSION, ALSO I'M NOT RESPONSIBLE FOR ANY DAMAGE YOU CAUSE TO YOUR NOTEBOOK/NETBOOK!
    It is also recommended that you download all the drivers for Windows x64 before you install Windows because the network card won't work because of a lack of drivers so you need a second PC with a USB or you download them before the OS switch and put them on a USB.
    Step 1: Make a bootable DVD/USB with Windows 7 x64 ISO on it, this can be done with Rufus for USB Flash Drives or PowerISO for DVD's! (I'm sorry I'm not allowed to post external links so you will have to google it  )
    Step 2: Restart the PC and when the text MSI pops up you press the DEL (numpad " . " key) and you will get into the BIOS Menu
    Step 3: Go to the BOOT tab and select Boot Mode (or something similar) and change the Boot Mode from UEFI to Legacy
    Step 4: Now you're Windows USB/DVD should be bootable (Microsoft says that Windows 7 supports UEFI Boot but I tried using multiple ISO's on different USB's and DVD's with different write speeds etc. but I didn't get Windows 7 Setup to boot beyond the 'Starting Windows' screen)
    Step 5: When Windows 7 Setup is Booted select your country settings and time format and don't select the Upgrade option but the Custom (advanced) option to install Windows 7.
    Now it's getting a bit difficult for most of us... Windows 7 Booted in a Legacy Boot Mode does not support GPT (Guid Partition Table) Disks, those can only be writed upon in UEFI mode. So now we need to change the Disk Partition Table to MBR (Master Boot Record). When you're at the partition menu, format and delete all partitions (yes don't worry you can safely delete all the partitions (when deleting the BIOS_RVY partition the F3 Hotkey function won't work anymore but we don't want that because it will recover Windows 8 but we hate that OS.. that's why we want to change to Windows 7!)
    Step 6: Now that all the partitions are deleted on the disk, we can openup CMD this can be done by pressing SHIFT+ F10 in the partition menu of the Windows 7 Setup.
    Now type the following commands:
    Diskpart
    List Disk
    Select Disk # (probably 0, because the most notebooks only have 1 HDD)
    Convert MBR
    Now your HDD is converted to a MBR Partition Table
    Step 7: Make a new partition (or more, depends on how much storage you have and want on your C:\ partition, Windows will automatically make some System partition(s))
    Step 8: Select the partition on which you want to install Windows 7 and let it install! the MSI GE70 2OE supports Windows 7 x64 so all the drivers for that OS can be downloaded at the MSI website, product info (GE70 2OE) and then downloads -> Drivers.
    Step 9: Install all the drivers and you're ready to go!
    I hope I helped you with this problem, for me it was kinda hard to figure out that you could safely delete all the partitions on the disk without screwing up your PC.. So I hope I gave you some confidence with doing so after reading this tutorial!

    Quote from: CanesBridge on 06-August-13, 00:02:42
    Hey man
    I did this on the new msi ge60 2oc 014ne, which should be pretty much the same. Almost everything seems fine now except for two things.. I still cant det the wireless network adapter working, even though the ethernet works and Ive installed all drivers i could find. Do you have any idea what to do?
    Second thing, in the Windows experience index, it gives my graphics card the grade 5.1, but it should be around 7. I installed the nvidia driver and all, so it doesn't really make sense to me... Any suggestions? Thanks!
    Oh yeah, and the big foot boot agent message that shows up every time i boot the machine, i cant make it go away... I click shift + f10, clicks disable message and f4 for save and quit.. But it shows up again nemt time i boot... An annoying useless waste of time..
    I guess it's pretty much the same indeed, do you have installed the Windows 7 x64 drivers for your wireless adapter or tried to install the Windows 8 ones? That could be the problem? If that's not the case and your ethernet is working, try checking for windows updates and see if it automatically installs the drivers for you? Make sure you installed the AzureWave Wireless LAN-NB114H driver that is available for your PC for Win7 x64, that driver as the name suggests is for wireless connection. Killer Bigfoot LAN is just for boosting your card so it's faster over LAN but the AzureWave makes the wireless connection available.. It worked for me so it should work for you?
    If you did this all, try reinstalling it.. If that doesn't work, try formatting al partitions again en reinstall Windows 7 and start with a clean install...
    About the videocard rate.. If your having problems with low FPS during gaming (maybe lower than normal) make sure you have installed the MSI driver for your graphic card (don't download it from the NVidia website) If you don't know, you can find all drivers for your device on the MSI website, Products -> Notebooks -> Gaming Series -> GE60 2OC -> Downloads
    If the lower rate of the video card didn't cause low FPS I wouldn't worry too much if I were you 
    Oh, and about the Bigfoot Boot Manager.. I have the exact same thing.. I'm still figuring out how to get rid of it, but for now I went into the configure mode and set the message to disabled and the message time to 1 second (so that 1 second extra boot time isn't that bad..) If I found a solution to get rid of it I will let you know!
    Hope I helped you, if not feel free to reply and ask again! We will figure it out together, or with help from someone else on this forum! 

  • NVIDIA Optimus on MSI GE70 2OE: No screens, then server fails to start

    Hello,
    I have recently acquired an MSI GE70 2OE-071 laptop with the following configuration, intending to run Arch Linux (dual boot with Windows 7) on it:
    CPU: Intel Core i7-4700 MQ
    GPU: Nvidia GeForce GTX 765M (2 GB DDR5 memory)
    LCD: 17.3" FHD 1920x1080
    Memory: 12 GB DDR3
    HDD: 1 TB 7200 RPM
    I originally installed Arch Linux the same way as described in the beginner's guide. I could get the basic twm setup to work, but the moment I installed the proprietary drivers (using pacman -S nvidia, followed by nvidia-xconfig, followed by a reboot), X Windows crashed, i.e. I started getting the No screens found error. So after some days of digging, I found the NVIDIA Optimus wiki page. Following the advice here, I could get rid of this error, but I still cannot get into the GUI, because the server terminates. There is no hardware problem that I can think of because Manjaro Linux works fine, and being a perpetual Arch novice eager to learn, I just wanted to get this thing to work from the ground up.
    So I'd really appreciate some help.
    Here are the relevant files and command outputs.
    uname -a. url = http://bpaste.net/show/166840/
    Linux gluon 3.12.6-1-ARCH #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013 x86_64 GNU/Linux
    .xinitrc. url = http://bpaste.net/show/166837/
    xrandr --setprovideroutputsource modesetting NVIDIA-0
    xrandr --auto
    /etc/X11/xorg.conf. url = http://bpaste.net/show/166838/
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 331.20 (buildmeister@swio-display-x86-rhel47-05) Wed Oct 30 18:20:53 PDT 2013
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "Unknown"
    HorizSync 28.0 - 33.0
    VertRefresh 43.0 - 72.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BusID "PCI:1:0:0" # manually added
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    /var/log/Xorg.0.log. url = http://bpaste.net/show/166839/
    [ 1684.463]
    X.Org X Server 1.14.5
    Release Date: 2013-12-12
    [ 1684.465] X Protocol Version 11, Revision 0
    [ 1684.465] Build Operating System: Linux 3.12.5-1-ARCH x86_64
    [ 1684.466] Current Operating System: Linux gluon 3.12.6-1-ARCH #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013 x86_64
    [ 1684.466] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=d2a5754c-c679-48b4-9b12-02ae94b83604 rw quiet
    [ 1684.467] Build Date: 06 January 2014 10:25:32PM
    [ 1684.467]
    [ 1684.468] Current version of pixman: 0.32.4
    [ 1684.469] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 1684.469] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 1684.472] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 11 07:17:09 2014
    [ 1684.472] (==) Using config file: "/etc/X11/xorg.conf"
    [ 1684.473] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 1684.473] (==) ServerLayout "Layout0"
    [ 1684.473] (**) |-->Screen "Screen0" (0)
    [ 1684.473] (**) | |-->Monitor "Monitor0"
    [ 1684.473] (**) | |-->Device "Device0"
    [ 1684.473] (**) |-->Input Device "Keyboard0"
    [ 1684.473] (**) |-->Input Device "Mouse0"
    [ 1684.473] (==) Automatically adding devices
    [ 1684.473] (==) Automatically enabling devices
    [ 1684.473] (==) Automatically adding GPU devices
    [ 1684.473] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 1684.473] Entry deleted from font path.
    [ 1684.473] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 1684.473] Entry deleted from font path.
    [ 1684.473] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 1684.473] Entry deleted from font path.
    [ 1684.473] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 1684.473] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 1684.473] Entry deleted from font path.
    [ 1684.473] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 1684.473] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 1684.473] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 1684.473] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 1684.473] (WW) Disabling Keyboard0
    [ 1684.473] (WW) Disabling Mouse0
    [ 1684.473] (II) Loader magic: 0x7fac20
    [ 1684.473] (II) Module ABI versions:
    [ 1684.473] X.Org ANSI C Emulation: 0.4
    [ 1684.473] X.Org Video Driver: 14.1
    [ 1684.473] X.Org XInput driver : 19.1
    [ 1684.473] X.Org Server Extension : 7.0
    [ 1684.473] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 1684.473] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 1684.474] (--) PCI:*(0:0:2:0) 8086:0416:1462:10e1 rev 6, Mem @ 0xf7400000/4194304, 0xb0000000/268435456, I/O @ 0x0000f000/64
    [ 1684.474] (--) PCI: (0:1:0:0) 10de:11e2:1462:10e1 rev 161, Mem @ 0xf6000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
    [ 1684.475] Initializing built-in extension Generic Event Extension
    [ 1684.476] Initializing built-in extension SHAPE
    [ 1684.476] Initializing built-in extension MIT-SHM
    [ 1684.477] Initializing built-in extension XInputExtension
    [ 1684.478] Initializing built-in extension XTEST
    [ 1684.478] Initializing built-in extension BIG-REQUESTS
    [ 1684.479] Initializing built-in extension SYNC
    [ 1684.479] Initializing built-in extension XKEYBOARD
    [ 1684.480] Initializing built-in extension XC-MISC
    [ 1684.481] Initializing built-in extension SECURITY
    [ 1684.481] Initializing built-in extension XINERAMA
    [ 1684.482] Initializing built-in extension XFIXES
    [ 1684.482] Initializing built-in extension RENDER
    [ 1684.483] Initializing built-in extension RANDR
    [ 1684.484] Initializing built-in extension COMPOSITE
    [ 1684.484] Initializing built-in extension DAMAGE
    [ 1684.485] Initializing built-in extension MIT-SCREEN-SAVER
    [ 1684.485] Initializing built-in extension DOUBLE-BUFFER
    [ 1684.486] Initializing built-in extension RECORD
    [ 1684.487] Initializing built-in extension DPMS
    [ 1684.487] Initializing built-in extension X-Resource
    [ 1684.488] Initializing built-in extension XVideo
    [ 1684.488] Initializing built-in extension XVideo-MotionCompensation
    [ 1684.489] Initializing built-in extension XFree86-VidModeExtension
    [ 1684.489] Initializing built-in extension XFree86-DGA
    [ 1684.490] Initializing built-in extension XFree86-DRI
    [ 1684.490] Initializing built-in extension DRI2
    [ 1684.490] (II) LoadModule: "glx"
    [ 1684.490] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 1684.490] (II) Module glx: vendor="X.Org Foundation"
    [ 1684.490] compiled for 1.14.5, module version = 1.0.0
    [ 1684.490] ABI class: X.Org Server Extension, version 7.0
    [ 1684.490] (==) AIGLX enabled
    [ 1684.491] Loading extension GLX
    [ 1684.491] (II) LoadModule: "nvidia"
    [ 1684.491] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 1684.491] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 1684.491] compiled for 4.0.2, module version = 1.0.0
    [ 1684.491] Module class: X.Org Video Driver
    [ 1684.491] (II) NVIDIA dlloader X Driver 331.20 Wed Oct 30 17:16:53 PDT 2013
    [ 1684.491] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 1684.491] (++) using VT number 1
    [ 1684.491] (II) Loading sub module "fb"
    [ 1684.491] (II) LoadModule: "fb"
    [ 1684.491] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 1684.491] (II) Module fb: vendor="X.Org Foundation"
    [ 1684.491] compiled for 1.14.5, module version = 1.0.0
    [ 1684.491] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 1684.491] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 1684.491] (II) Loading sub module "wfb"
    [ 1684.491] (II) LoadModule: "wfb"
    [ 1684.491] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 1684.491] (II) Module wfb: vendor="X.Org Foundation"
    [ 1684.491] compiled for 1.14.5, module version = 1.0.0
    [ 1684.491] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 1684.491] (II) Loading sub module "ramdac"
    [ 1684.491] (II) LoadModule: "ramdac"
    [ 1684.491] (II) Module "ramdac" already built-in
    [ 1684.491] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 1684.491] (==) NVIDIA(0): RGB weight 888
    [ 1684.492] (==) NVIDIA(0): Default visual is TrueColor
    [ 1684.492] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 1684.492] (**) NVIDIA(0): Enabling 2D acceleration
    [ 1684.492] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
    [ 1684.492] (EE) NVIDIA(0): log file that the GLX module has been loaded in your X
    [ 1684.492] (EE) NVIDIA(0): server, and that the module is the NVIDIA GLX module. If
    [ 1684.492] (EE) NVIDIA(0): you continue to encounter problems, Please try
    [ 1684.492] (EE) NVIDIA(0): reinstalling the NVIDIA driver.
    [ 1684.654] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
    [ 1684.655] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 765M (GK106) at PCI:1:0:0 (GPU-0)
    [ 1684.655] (--) NVIDIA(0): Memory: 2097152 kBytes
    [ 1684.655] (--) NVIDIA(0): VideoBIOS: 80.06.5d.00.09
    [ 1684.655] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 1684.655] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 765M at PCI:1:0:0
    [ 1684.655] (--) NVIDIA(0): none
    [ 1684.655] (II) NVIDIA(0): Validated MetaModes:
    [ 1684.655] (II) NVIDIA(0): "NULL"
    [ 1684.655] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
    [ 1684.655] (WW) NVIDIA(0): Unable to get display device for DPI computation.
    [ 1684.655] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
    [ 1684.655] (--) Depth 24 pixmap format is 32 bpp
    [ 1684.655] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
    [ 1684.655] (II) NVIDIA: access.
    [ 1684.661] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 1684.661] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 1684.661] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 1684.661] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 1684.661] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 1684.661] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 1684.661] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 1684.661] (II) NVIDIA(0): Config Options in the README.
    [ 1684.661] (II) NVIDIA(0): Setting mode "NULL"
    [ 1684.661] (EE) NVIDIA(0): Failed to initiate mode change.
    [ 1684.661] (EE) NVIDIA(0): Failed to complete mode change
    [ 1684.668] (II) NVIDIA(0): Built-in logo is bigger than the screen.
    [ 1684.668] Loading extension NV-GLX
    [ 1684.670] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 1684.670] (==) NVIDIA(0): Backing store disabled
    [ 1684.670] (==) NVIDIA(0): Silken mouse enabled
    [ 1684.670] (**) NVIDIA(0): DPMS enabled
    [ 1684.670] Loading extension NV-CONTROL
    [ 1684.670] (II) Loading sub module "dri2"
    [ 1684.670] (II) LoadModule: "dri2"
    [ 1684.670] (II) Module "dri2" already built-in
    [ 1684.670] (II) NVIDIA(0): [DRI2] Setup complete
    [ 1684.670] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 1684.670] (--) RandR disabled
    [ 1684.673] (II) AIGLX: Screen 0 is not DRI2 capable
    [ 1684.673] (II) AIGLX: Screen 0 is not DRI capable
    [ 1684.680] (II) AIGLX: Loaded and initialized swrast
    [ 1684.680] (II) GLX: Initialized DRISWRAST GL provider for screen 0
    [ 1684.697] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 1684.697] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 1684.697] (II) LoadModule: "evdev"
    [ 1684.697] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 1684.697] (II) Module evdev: vendor="X.Org Foundation"
    [ 1684.697] compiled for 1.14.3, module version = 2.8.2
    [ 1684.697] Module class: X.Org XInput Driver
    [ 1684.697] ABI class: X.Org XInput driver, version 19.1
    [ 1684.697] (II) Using input driver 'evdev' for 'Power Button'
    [ 1684.697] (**) Power Button: always reports core events
    [ 1684.697] (**) evdev: Power Button: Device: "/dev/input/event3"
    [ 1684.697] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 1684.697] (--) evdev: Power Button: Found keys
    [ 1684.697] (II) evdev: Power Button: Configuring as keyboard
    [ 1684.697] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
    [ 1684.697] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 1684.697] (**) Option "xkb_rules" "evdev"
    [ 1684.697] (**) Option "xkb_model" "pc104"
    [ 1684.697] (**) Option "xkb_layout" "us"
    [ 1684.709] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
    [ 1684.709] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 1684.709] (II) Using input driver 'evdev' for 'Video Bus'
    [ 1684.709] (**) Video Bus: always reports core events
    [ 1684.709] (**) evdev: Video Bus: Device: "/dev/input/event12"
    [ 1684.709] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 1684.709] (--) evdev: Video Bus: Found keys
    [ 1684.709] (II) evdev: Video Bus: Configuring as keyboard
    [ 1684.709] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input13/event12"
    [ 1684.709] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 1684.709] (**) Option "xkb_rules" "evdev"
    [ 1684.709] (**) Option "xkb_model" "pc104"
    [ 1684.709] (**) Option "xkb_layout" "us"
    [ 1684.709] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [ 1684.709] (II) No input driver specified, ignoring this device.
    [ 1684.709] (II) This device may have been added with another device file.
    [ 1684.709] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
    [ 1684.709] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 1684.709] (II) Using input driver 'evdev' for 'Video Bus'
    [ 1684.709] (**) Video Bus: always reports core events
    [ 1684.709] (**) evdev: Video Bus: Device: "/dev/input/event11"
    [ 1684.709] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 1684.709] (--) evdev: Video Bus: Found keys
    [ 1684.709] (II) evdev: Video Bus: Configuring as keyboard
    [ 1684.709] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:48/LNXVIDEO:00/input/input12/event11"
    [ 1684.709] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
    [ 1684.709] (**) Option "xkb_rules" "evdev"
    [ 1684.709] (**) Option "xkb_model" "pc104"
    [ 1684.709] (**) Option "xkb_layout" "us"
    [ 1684.710] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 1684.710] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 1684.710] (II) Using input driver 'evdev' for 'Power Button'
    [ 1684.710] (**) Power Button: always reports core events
    [ 1684.710] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 1684.710] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 1684.710] (--) evdev: Power Button: Found keys
    [ 1684.710] (II) evdev: Power Button: Configuring as keyboard
    [ 1684.710] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event2"
    [ 1684.710] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
    [ 1684.710] (**) Option "xkb_rules" "evdev"
    [ 1684.710] (**) Option "xkb_model" "pc104"
    [ 1684.710] (**) Option "xkb_layout" "us"
    [ 1684.710] (II) config/udev: Adding drm device (/dev/dri/card1)
    [ 1684.710] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 1684.710] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=3 (/dev/input/event15)
    [ 1684.710] (II) No input driver specified, ignoring this device.
    [ 1684.710] (II) This device may have been added with another device file.
    [ 1684.710] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=7 (/dev/input/event14)
    [ 1684.710] (II) No input driver specified, ignoring this device.
    [ 1684.710] (II) This device may have been added with another device file.
    [ 1684.710] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=8 (/dev/input/event13)
    [ 1684.710] (II) No input driver specified, ignoring this device.
    [ 1684.710] (II) This device may have been added with another device file.
    [ 1684.710] (II) config/udev: Adding input device BisonCam, NB Pro (/dev/input/event9)
    [ 1684.710] (**) BisonCam, NB Pro: Applying InputClass "evdev keyboard catchall"
    [ 1684.710] (II) Using input driver 'evdev' for 'BisonCam, NB Pro'
    [ 1684.710] (**) BisonCam, NB Pro: always reports core events
    [ 1684.710] (**) evdev: BisonCam, NB Pro: Device: "/dev/input/event9"
    [ 1684.710] (--) evdev: BisonCam, NB Pro: Vendor 0x5986 Product 0x14c
    [ 1684.710] (--) evdev: BisonCam, NB Pro: Found keys
    [ 1684.710] (II) evdev: BisonCam, NB Pro: Configuring as keyboard
    [ 1684.710] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input11/event9"
    [ 1684.710] (II) XINPUT: Adding extended input device "BisonCam, NB Pro" (type: KEYBOARD, id 10)
    [ 1684.710] (**) Option "xkb_rules" "evdev"
    [ 1684.710] (**) Option "xkb_model" "pc104"
    [ 1684.710] (**) Option "xkb_layout" "us"
    [ 1684.711] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
    [ 1684.711] (II) No input driver specified, ignoring this device.
    [ 1684.711] (II) This device may have been added with another device file.
    [ 1684.711] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event7)
    [ 1684.711] (II) No input driver specified, ignoring this device.
    [ 1684.711] (II) This device may have been added with another device file.
    [ 1684.711] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event8)
    [ 1684.711] (II) No input driver specified, ignoring this device.
    [ 1684.711] (II) This device may have been added with another device file.
    [ 1684.711] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 1684.711] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 1684.711] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 1684.711] (**) AT Translated Set 2 keyboard: always reports core events
    [ 1684.711] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 1684.711] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 1684.711] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 1684.711] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 1684.711] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 1684.711] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
    [ 1684.711] (**) Option "xkb_rules" "evdev"
    [ 1684.711] (**) Option "xkb_model" "pc104"
    [ 1684.711] (**) Option "xkb_layout" "us"
    [ 1684.711] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event10)
    [ 1684.711] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
    [ 1684.711] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
    [ 1684.711] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
    [ 1684.711] (II) LoadModule: "synaptics"
    [ 1684.711] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 1684.711] (II) Module synaptics: vendor="X.Org Foundation"
    [ 1684.711] compiled for 1.14.4, module version = 1.7.2
    [ 1684.711] Module class: X.Org XInput Driver
    [ 1684.711] ABI class: X.Org XInput driver, version 19.1
    [ 1684.711] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
    [ 1684.711] (**) ETPS/2 Elantech Touchpad: always reports core events
    [ 1684.711] (**) Option "Device" "/dev/input/event10"
    [ 1684.783] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
    [ 1684.783] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3260 (res 33)
    [ 1684.783] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2119 (res 33)
    [ 1684.783] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
    [ 1684.783] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
    [ 1684.783] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
    [ 1684.783] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
    [ 1684.783] (**) Option "TapButton1" "1"
    [ 1684.783] (**) Option "TapButton2" "2"
    [ 1684.783] (**) Option "TapButton3" "3"
    [ 1684.783] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
    [ 1684.783] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
    [ 1684.783] (**) ETPS/2 Elantech Touchpad: always reports core events
    [ 1684.809] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event10"
    [ 1684.809] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 12)
    [ 1684.810] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
    [ 1684.810] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
    [ 1684.810] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.051
    [ 1684.810] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
    [ 1684.810] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
    [ 1684.810] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
    [ 1684.810] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
    [ 1684.810] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
    [ 1684.810] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
    [ 1684.810] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
    [ 1684.810] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
    [ 1684.810] (II) No input driver specified, ignoring this device.
    [ 1684.810] (II) This device may have been added with another device file.
    [ 1684.810] (II) config/udev: Adding input device MSI WMI hotkeys (/dev/input/event5)
    [ 1684.810] (**) MSI WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 1684.810] (II) Using input driver 'evdev' for 'MSI WMI hotkeys'
    [ 1684.810] (**) MSI WMI hotkeys: always reports core events
    [ 1684.810] (**) evdev: MSI WMI hotkeys: Device: "/dev/input/event5"
    [ 1684.810] (--) evdev: MSI WMI hotkeys: Vendor 0 Product 0
    [ 1684.810] (--) evdev: MSI WMI hotkeys: Found keys
    [ 1684.810] (II) evdev: MSI WMI hotkeys: Configuring as keyboard
    [ 1684.810] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event5"
    [ 1684.810] (II) XINPUT: Adding extended input device "MSI WMI hotkeys" (type: KEYBOARD, id 13)
    [ 1684.810] (**) Option "xkb_rules" "evdev"
    [ 1684.810] (**) Option "xkb_model" "pc104"
    [ 1684.810] (**) Option "xkb_layout" "us"
    [ 1685.097] (II) evdev: MSI WMI hotkeys: Close
    [ 1685.097] (II) UnloadModule: "evdev"
    [ 1685.097] (II) UnloadModule: "synaptics"
    [ 1685.097] (II) evdev: AT Translated Set 2 keyboard: Close
    [ 1685.097] (II) UnloadModule: "evdev"
    [ 1685.097] (II) evdev: BisonCam, NB Pro: Close
    [ 1685.097] (II) UnloadModule: "evdev"
    [ 1685.097] (II) evdev: Power Button: Close
    [ 1685.097] (II) UnloadModule: "evdev"
    [ 1685.097] (II) evdev: Video Bus: Close
    [ 1685.097] (II) UnloadModule: "evdev"
    [ 1685.097] (II) evdev: Video Bus: Close
    [ 1685.097] (II) UnloadModule: "evdev"
    [ 1685.097] (II) evdev: Power Button: Close
    [ 1685.097] (II) UnloadModule: "evdev"
    [ 1685.116] (II) NVIDIA(GPU-0): Deleting GPU-0
    [b][ 1685.120] (EE) Server terminated successfully (0). Closing log file.[/b]
    lspci. url = http://bpaste.net/show/166842/
    00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
    00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
    00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
    00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
    00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05)
    00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
    00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05)
    00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
    00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5)
    00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d5)
    00:1c.3 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 (rev d5)
    00:1c.5 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #6 (rev d5)
    00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05)
    00:1f.0 ISA bridge: Intel Corporation HM87 Express LPC Controller (rev 05)
    00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05)
    00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)
    01:00.0 3D controller: NVIDIA Corporation GK106M [GeForce GTX 765M] (rev a1)
    03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5227 (rev 01)
    04:00.0 Ethernet controller: Qualcomm Atheros Killer E2200 Gigabit Ethernet Controller (rev 13)
    05:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8723AE PCIe Wireless Network Adapter
    dmesg. url: http://bpaste.net/show/166841/
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.12.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=d2a5754c-c679-48b4-9b12-02ae94b83604 rw quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009b171fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009b172000-0x000000009b178fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009b179000-0x000000009b8e8fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009b8e9000-0x000000009bb55fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009bb56000-0x00000000ab48ffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ab490000-0x00000000ab697fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ab698000-0x00000000ab78bfff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ab78c000-0x00000000abb73fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000abb74000-0x00000000abffefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000abfff000-0x00000000abffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ad000000-0x00000000af1fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000034fdfffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: Micro-Star International Co., Ltd. GE70 2OC\2OE/MS-1757, BIOS E1757IMS.10E 07/15/2013
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x34fe00 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-E7FFF uncachable
    [ 0.000000] E8000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0000000000 mask 7E00000000 write-back
    [ 0.000000] 1 base 0200000000 mask 7F00000000 write-back
    [ 0.000000] 2 base 0300000000 mask 7F80000000 write-back
    [ 0.000000] 3 base 00C0000000 mask 7FC0000000 uncachable
    [ 0.000000] 4 base 00B0000000 mask 7FF0000000 uncachable
    [ 0.000000] 5 base 00AE000000 mask 7FFE000000 uncachable
    [ 0.000000] 6 base 00AD000000 mask 7FFF000000 uncachable
    [ 0.000000] 7 base 0360000000 mask 7FE0000000 uncachable
    [ 0.000000] 8 base 0350000000 mask 7FF0000000 uncachable
    [ 0.000000] 9 base 034FE00000 mask 7FFFE00000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: update [mem 0xad000000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0xac000 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000fd770-0x000fd77f] mapped at [ffff8800000fd770]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
    [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
    [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x34fc00000-0x34fdfffff]
    [ 0.000000] [mem 0x34fc00000-0x34fdfffff] page 2M
    [ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x34c000000-0x34fbfffff]
    [ 0.000000] [mem 0x34c000000-0x34fbfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x300000000-0x34bffffff]
    [ 0.000000] [mem 0x300000000-0x33fffffff] page 1G
    [ 0.000000] [mem 0x340000000-0x34bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x9b171fff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
    [ 0.000000] [mem 0x80000000-0x9affffff] page 2M
    [ 0.000000] [mem 0x9b000000-0x9b171fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x9b179000-0x9b8e8fff]
    [ 0.000000] [mem 0x9b179000-0x9b1fffff] page 4k
    [ 0.000000] [mem 0x9b200000-0x9b7fffff] page 2M
    [ 0.000000] [mem 0x9b800000-0x9b8e8fff] page 4k
    [ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x9bb56000-0xab48ffff]
    [ 0.000000] [mem 0x9bb56000-0x9bbfffff] page 4k
    [ 0.000000] [mem 0x9bc00000-0xab3fffff] page 2M
    [ 0.000000] [mem 0xab400000-0xab48ffff] page 4k
    [ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0xab698000-0xab78bfff]
    [ 0.000000] [mem 0xab698000-0xab78bfff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xabfff000-0xabffffff]
    [ 0.000000] [mem 0xabfff000-0xabffffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x2ffffffff]
    [ 0.000000] [mem 0x100000000-0x2ffffffff] page 1G
    [ 0.000000] RAMDISK: [mem 0x379fc000-0x37cf5fff]
    [ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 MSI_NB)
    [ 0.000000] ACPI: XSDT 00000000ab814098 000AC (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 00000000ab8206b0 0010C (v05 MSI_NB MEGABOOK 01072009 AMI 00010013)
    [ 0.000000] ACPI: DSDT 00000000ab8141d8 0C4D4 (v02 MSI_NB MEGABOOK 00000022 INTL 20091112)
    [ 0.000000] ACPI: FACS 00000000abb72080 00040
    [ 0.000000] ACPI: APIC 00000000ab8207c0 00092 (v03 MSI_NB MEGABOOK 01072009 AMI 00010013)
    [ 0.000000] ACPI: FPDT 00000000ab820858 00044 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
    [ 0.000000] ACPI: ASF! 00000000ab8208a0 000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
    [ 0.000000] ACPI: SSDT 00000000ab820948 00200 (v01 INTEL sensrhub 00000000 INTL 20120711)
    [ 0.000000] ACPI: SSDT 00000000ab820b48 0019D (v01 Intel zpodd 00001000 INTL 20091112)
    [ 0.000000] ACPI: SLIC 00000000ab820ce8 00176 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
    [ 0.000000] ACPI: SSDT 00000000ab820e60 00575 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.000000] ACPI: SSDT 00000000ab8213d8 00AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
    [ 0.000000] ACPI: MCFG 00000000ab821eb0 0003C (v01 MSI_NB MEGABOOK 01072009 MSFT 00000097)
    [ 0.000000] ACPI: HPET 00000000ab821ef0 00038 (v01 MSI_NB MEGABOOK 01072009 AMI. 00000005)
    [ 0.000000] ACPI: SSDT 00000000ab821f28 00315 (v01 SataRe SataTabl 00001000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 00000000ab822240 0355D (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 00000000ab8257a0 011FD (v01 SgRef SgPeg 00001000 INTL 20091112)
    [ 0.000000] ACPI: MSFF 00000000ab8269a0 00029 (v01 MSI_NB MEGABOOK 00000010 AMI 00010013)
    [ 0.000000] ACPI: DMAR 00000000ab8269d0 00090 (v01 INTEL HSW 00000001 INTL 00000001)
    [ 0.000000] ACPI: SSDT 00000000ab826a60 01464 (v01 OptRef OptTabl 00001000 INTL 20120711)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000034fdfffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x34fdfffff]
    [ 0.000000] NODE_DATA [mem 0x34fdf6000-0x34fdfafff]
    [ 0.000000] [ffffea0000000000-ffffea000d3fffff] PMD -> [ffff880343400000-ffff88034f3fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x34fdfffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0x9b171fff]
    [ 0.000000] node 0: [mem 0x9b179000-0x9b8e8fff]
    [ 0.000000] node 0: [mem 0x9bb56000-0xab48ffff]
    [ 0.000000] node 0: [mem 0xab698000-0xab78bfff]
    [ 0.000000] node 0: [mem 0xabfff000-0xabffffff]
    [ 0.000000] node 0: [mem 0x100000000-0x34fdfffff]
    [ 0.000000] On node 0 totalpages: 3125421
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 10893 pages used for memmap
    [ 0.000000] DMA32 zone: 697105 pages, LIFO batch:31
    [ 0.000000] Normal zone: 37880 pages used for memmap
    [ 0.000000] Normal zone: 2424320 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b172000-0x9b178fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b8e9000-0x9bb55fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xab490000-0xab697fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xab78c000-0xabb73fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xabb74000-0xabffefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xac000000-0xacffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xad000000-0xaf1fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xaf200000-0xf7ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
    [ 0.000000] e820: [mem 0xaf200000-0xf7ffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88034fa00000 s86464 r8192 d24128 u262144
    [ 0.000000] pcpu-alloc: s86464 r8192 d24128 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3076563
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=d2a5754c-c679-48b4-9b12-02ae94b83604 rw quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] ------------[ cut here ]------------
    [ 0.000000] WARNING: CPU: 0 PID: 0 at drivers/iommu/dmar.c:488 warn_invalid_dmar+0x7e/0x90()
    [ 0.000000] Your BIOS is broken; DMAR reported at address 0!
    BIOS vendor: American Megatrends Inc.; Ver: E1757IMS.10E; Product Version: REV:1.0
    [ 0.000000] Modules linked in:
    [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.12.6-1-ARCH #1
    [ 0.000000] Hardware name: Micro-Star International Co., Ltd. GE70 2OC\2OE/MS-1757, BIOS E1757IMS.10E 07/15/2013
    [ 0.000000] 000000000000000b ffffffff81801de8 ffffffff814ee4fb ffffffff81801e30
    [ 0.000000] ffffffff81801e20 ffffffff81062bcd ffffffff81b3101c ffffffff81b3106c
    [ 0.000000] 0000000000000000 ffff88034fdaad00 ffffffff819f4000 ffffffff81801e80
    [ 0.000000] Call Trace:
    [ 0.000000] [<ffffffff814ee4fb>] dump_stack+0x54/0x8d
    [ 0.000000] [<ffffffff81062bcd>] warn_slowpath_common+0x7d/0xa0
    [ 0.000000] [<ffffffff81062c84>] warn_slowpath_fmt_taint+0x44/0x50
    [ 0.000000] [<ffffffff818fb9d9>] ? early_ioremap+0x13/0x15
    [ 0.000000] [<ffffffff818f1b3f>] ? __acpi_map_table+0x13/0x18
    [ 0.000000] [<ffffffff813d98be>] warn_invalid_dmar+0x7e/0x90
    [ 0.000000] [<ffffffff81927a65>] check_zero_address+0x68/0xf4
    [ 0.000000] [<ffffffff81927b06>] detect_intel_iommu+0x15/0xae
    [ 0.000000] [<ffffffff818ebd5a>] pci_iommu_alloc+0x4a/0x6c
    [ 0.000000] [<ffffffff818fb3af>] mem_init+0x17/0x9c
    [ 0.000000] [<ffffffff818e1ccb>] start_kernel+0x1de/0x420
    [ 0.000000] [<ffffffff818e18f6>] ? repair_env_string+0x5c/0x5c
    [ 0.000000] [<ffffffff818e1120>] ? early_idt_handlers+0x120/0x120
    [ 0.000000] [<ffffffff818e15de>] x86_64_start_reservations+0x2a/0x2c
    [ 0.000000] [<ffffffff818e16e8>] x86_64_start_kernel+0x108/0x117
    [ 0.000000] ---[ end trace ed55042d28ea2d46 ]---
    [ 0.000000] Memory: 12223184K/12501684K available (5124K kernel code, 807K rwdata, 1628K rodata, 1144K init, 1288K bss, 278500K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] NR_IRQS:8448 nr_irqs:744 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 50331648 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 2394.605 MHz processor
    [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4791.76 BogoMIPS (lpj=7982016)
    [ 0.000004] pid_max: default: 32768 minimum: 301
    [ 0.000023] Security Framework initialized
    [ 0.000028] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000029] Yama: becoming mindful.
    [ 0.000723] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
    [ 0.002956] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.003897] Mount-cache hash table entries: 256
    [ 0.004021] Initializing cgroup subsys memory
    [ 0.004028] Initializing cgroup subsys devices
    [ 0.004029] Initializing cgroup subsys freezer
    [ 0.004030] Initializing cgroup subsys net_cls
    [ 0.004031] Initializing cgroup subsys blkio
    [ 0.004047] CPU: Physical Processor ID: 0
    [ 0.004047] CPU: Processor Core ID: 0
    [ 0.004050] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.004809] mce: CPU supports 9 MCE banks
    [ 0.004819] CPU0: Thermal monitoring enabled (TM1)
    [ 0.004828] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
    Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
    tlb_flushall_shift: 6
    [ 0.004901] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
    [ 0.005496] ACPI: Core revision 20130725
    [ 0.012467] ACPI: All ACPI Tables successfully acquired
    [ 0.014025] ftrace: allocating 20318 entries in 80 pages
    [ 0.020098] dmar: Host address width 39
    [ 0.020099] dmar: DRHD base: 0x00000000000000 flags: 0x1
    [ 0.020100] dmar: parse DMAR table failure.
    [ 0.020489] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.053520] smpboot: CPU0: Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz (fam: 06, model: 3c, stepping: 03)
    [ 0.053525] TSC deadline timer enabled
    [ 0.053531] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
    [ 0.053535] ... version: 3
    [ 0.053536] ... bit width: 48
    [ 0.053537] ... generic registers: 4
    [ 0.053537] ... value mask: 0000ffffffffffff
    [ 0.053538] ... max period: 0000ffffffffffff
    [ 0.053539] ... fixed-purpose events: 3
    [ 0.053539] ... event mask: 000000070000000f
    [ 0.094311] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.080318] smpboot: Booting Node 0, Processors # 1 # 2 # 3 # 4 # 5 # 6 # 7 OK
    [ 0.218665] Brought up 8 CPUs
    [ 0.218667] smpboot: Total of 8 processors activated (38329.08 BogoMIPS)
    [ 0.224614] devtmpfs: initialized
    [ 0.226265] PM: Registering ACPI NVS region [mem 0x9b172000-0x9b178fff] (28672 bytes)
    [ 0.226266] PM: Registering ACPI NVS region [mem 0xab78c000-0xabb73fff] (4096000 bytes)
    [ 0.226792] RTC time: 6:49:04, date: 01/11/14
    [ 0.226816] NET: Registered protocol family 16
    [ 0.226875] cpuidle: using governor ladder
    [ 0.226876] cpuidle: using governor menu
    [ 0.226893] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.226894] ACPI: bus type PCI registered
    [ 0.226896] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.226930] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.226931] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.231360] PCI: Using configuration type 1 for base access
    [ 0.231828] bio: create slab <bio-0> at 0
    [ 0.231908] ACPI: Added _OSI(Module Device)
    [ 0.231909] ACPI: Added _OSI(Processor Device)
    [ 0.231910] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.231911] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.233324] ACPI: EC: Detected MSI hardware, enabling workarounds.
    [ 0.233326] ACPI: EC: Look up EC in DSDT
    [ 0.233774] ACPI Error: No handler for Region [EC__] (ffff88033e484c18) [EmbeddedControl] (20130725/evregion-162)
    [ 0.233777] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20130725/exfldio-305)
    [ 0.233779] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC__._REG] (Node ffff88033e4852f8), AE_NOT_EXIST (20130725/psparse-536)
    [ 0.234482] ACPI: Executed 2 blocks of module-level executable AML code
    [ 0.268613] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.284659] ACPI: SSDT 00000000ab68dc18 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.285133] ACPI: Dynamic OEM Table Load:
    [ 0.285135] ACPI: SSDT (null) 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.298133] ACPI: SSDT 00000000ab68d618 005AA (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.298671] ACPI: Dynamic OEM Table Load:
    [ 0.298673] ACPI: SSDT (null) 005AA (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.314712] ACPI: SSDT 00000000ab68cd98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.315188] ACPI: Dynamic OEM Table Load:
    [ 0.315190] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.339941] ACPI: Interpreter enabled
    [ 0.339948] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
    [ 0.339953] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
    [ 0.339965] ACPI: (supports S0 S3 S4 S5)
    [ 0.339967] ACPI: Using IOAPIC for interrupt routing
    [ 0.339990] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.340148] ACPI: No dock devices found.
    [ 0.366372] ACPI: Power Resource [FN00] (off)
    [ 0.366419] ACPI: Power Resource [FN01] (off)
    [ 0.366465] ACPI: Power Resource [FN02] (off)
    [ 0.366511] ACPI: Power Resource [FN03] (off)
    [ 0.366555] ACPI: Power Resource [FN04] (off)
    [ 0.367075] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.367173] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
    [ 0.367293] acpi PNP0A08:00: ACPI _OSC control (0x18) granted
    [ 0.367577] ACPI: \_SB_.PCI0.TPMX: can't evaluate _ADR (0x5)
    [ 0.367642] ACPI: \_SB_.PCI0.PDRC: can't evaluate _ADR (0x5)
    [ 0.367643] ACPI: \_SB_.PCI0.DOCK: can't evaluate _ADR (0x5)
    [ 0.367659] ACPI: \_SB_.PCI0.WMI1: can't evaluate _ADR (0x5)
    [ 0.367660] PCI host bridge to bus 0000:00
    [ 0.367662] pci_bus 0000:00: root bus resource [bus 00-3e]
    [ 0.367663] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.367664] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.367665] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.367666] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 0.367667] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.367668] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.367669] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.367670] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    [ 0.367671] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    [ 0.367672] pci_bus 0000:00: root bus resource [mem 0xaf200000-0xfeafffff]
    [ 0.367677] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
    [ 0.367735] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
    [ 0.367760] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.367794] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 0.367819] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
    [ 0.367827] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
    [ 0.367832] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
    [ 0.367835] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
    [ 0.367887] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
    [ 0.367893] pci 0000:00:03.0: reg 0x10: [mem 0xf7b14000-0xf7b17fff 64bit]
    [ 0.367970] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
    [ 0.367986] pci 0000:00:14.0: reg 0x10: [mem 0xf7b00000-0xf7b0ffff 64bit]
    [ 0.368043] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.368071] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 0.368097] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
    [ 0.368113] pci 0000:00:16.0: reg 0x10: [mem 0xf7b1e000-0xf7b1e00f 64bit]
    [ 0.368169] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.368229] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
    [ 0.368247] pci 0000:00:1a.0: reg 0x10: [mem 0xf7b1c000-0xf7b1c3ff]
    [ 0.368328] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.368366] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 0.368391] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
    [ 0.368403] pci 0000:00:1b.0: reg 0x10: [mem 0xf7b10000-0xf7b13fff 64bit]
    [ 0.368460] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.368490] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.368512] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
    [ 0.368569] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.368599] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.368621] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
    [ 0.368678] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.368709] pci 0000:00:1c.2: System wakeup disabled by ACPI
    [ 0.368731] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
    [ 0.368787] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.368817] pci 0000:00:1c.3: System wakeup disabled by ACPI
    [ 0.368839] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
    [ 0.368896] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 0.368926] pci 0000:00:1c.5: System wakeup disabled by ACPI
    [ 0.368953] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
    [ 0.368972] pci 0000:00:1d.0: reg 0x10: [mem 0xf7b1b000-0xf7b1b3ff]
    [ 0.369051] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.369089] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.369114] pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100
    [ 0.369249] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
    [ 0.369263] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
    [ 0.369269] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
    [ 0.369276] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
    [ 0.369283] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
    [ 0.369289] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
    [ 0.369296] pci 0000:00:1f.2: reg 0x24: [mem 0xf7b1a000-0xf7b1a7ff]
    [ 0.369328] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.369373] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
    [ 0.369385] pci 0000:00:1f.3: reg 0x10: [mem 0xf7b19000-0xf7b190ff 64bit]
    [ 0.369403] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
    [ 0.369506] pci 0000:01:00.0: [10de:11e2] type 00 class 0x030200
    [ 0.369520] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
    [ 0.369537] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.369552] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
    [ 0.369563] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
    [ 0.369574] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
    [ 0.369649] pci 0000:01:00.0: System wakeup disabled by ACPI
    [ 0.374726] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.374728] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.374730] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
    [ 0.374733] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
    [ 0.374803] acpiphp: Slot [1] registered
    [ 0.374809] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.374970] pci 0000:03:00.0: [10ec:5227] type 00 class 0xff0000
    [ 0.375028] pci 0000:03:00.0: reg 0x10: [mem 0xf7a00000-0xf7a00fff]
    [ 0.375359] pci 0000:03:00.0: supports D1 D2
    [ 0.375360] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
    [ 0.375443] pci 0000:03:00.0: System wakeup disabled by ACPI
    [ 0.381443] pci 0000:00:1c.2: PCI bridge to [bus 03]
    [ 0.381448] pci 0000:00:1c.2: bridge window [mem 0xf7a00000-0xf7afffff]
    [ 0.381581] pci 0000:04:00.0: [1969:e091] type 00 class 0x020000
    [ 0.381627] pci 0000:04:00.0: reg 0x10: [mem 0xf7900000-0xf793ffff 64bit]
    [ 0.381672] pci 0000:04:00.0: reg 0x18: [io 0xd000-0xd07f]
    [ 0.381900] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.381990] pci 0000:04:00.0: System wakeup disabled by ACPI
    [ 0.388100] pci 0000:00:1c.3: PCI bridge to [bus 04]
    [ 0.388104] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
    [ 0.388108] pci 0000:00:1c.3: bridge window [mem 0xf7900000-0xf79fffff]
    [ 0.388207] pci 0000:05:00.0: [10ec:8723] type 00 class 0x028000
    [ 0.388235] pci 0000:05:00.0: reg 0x10: [io 0xc000-0xc0ff]
    [ 0.388284] pci 0000:05:00.0: reg 0x18: [mem 0xf7800000-0xf7803fff 64bit]
    [ 0.388429] pci 0000:05:00.0: supports D1 D2
    [ 0.388430] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.388469] pci 0000:05:00.0: System wakeup disabled by ACPI
    [ 0.394758] pci 0000:00:1c.5: PCI bridge to [bus 05]
    [ 0.394762] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
    [ 0.394766] pci 0000:00:1c.5: bridge window [mem 0xf7800000-0xf78fffff]
    [ 0.394830] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
    [ 0.402198] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.402232] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 10 11 12 14 15)
    [ 0.402263] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
    [ 0.402295] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 0.402326] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.402357] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.402388] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
    [ 0.402419] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.402688] ACPI: Enabled 5 GPEs in block 00 to 3F
    [ 0.402692] ACPI: \_SB_.PCI0: notify handler is installed
    [ 0.402741] Found 1 acpi root devices
    [ 0.402767] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 0.402823] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.402826] vgaarb: loaded
    [ 0.402826] vgaarb: bridge control possible 0000:00:02.0
    [ 0.402849] PCI: Using ACPI for IRQ routing
    [ 0.404045] PCI: pci_cache_line_size set to 64 bytes
    [ 0.404093] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
    [ 0.404094] e820: reserve RAM buffer [mem 0x9b172000-0x9bffffff]
    [ 0.404095] e820: reserve RAM buffer [mem 0x9b8e9000-0x9bffffff]
    [ 0.404096] e820: reserve RAM buffer [mem 0xab490000-0xabffffff]
    [ 0.404097] e820: reserve RAM buffer [mem 0xab78c000-0xabffffff]
    [ 0.404098] e820: reserve RAM buffer [mem 0x34fe00000-0x34fffffff]
    [ 0.404149] NetLabel: Initializing
    [ 0.404150] NetLabel: domain hash size = 128
    [ 0.404150] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.404157] NetLabel: unlabeled traffic allowed by default
    [ 0.404169] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.404172] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.406193] Switched to clocksource hpet
    [ 0.408777] pnp: PnP ACPI init
    [ 0.408783] ACPI: bus type PNP registered
    [ 0.408822] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 0.408824] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.408831] pnp 00:01: [dma 4]
    [ 0.408839] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.408852] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.408908] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.408937] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.409005] system 00:05: [io 0x0680-0x069f] has been reserved
    [ 0.409006] system 00:05: [io 0xffff] has been reserved
    [ 0.409007] system 00:05: [io 0xffff] has been reserved
    [ 0.409008] system 00:05: [io 0xffff] has been reserved
    [ 0.409010] system 00:05: [io 0x1c00-0x1cfe] has been reserved
    [ 0.409011] system 00:05: [io 0x1d00-0x1dfe] has been reserved
    [ 0.409012] system 00:05: [io 0x1e00-0x1efe] has been reserved
    [ 0.409013] system 00:05: [io 0x1f00-0x1ffe] has been reserved
    [ 0.409015] system 00:05: [io 0x1800-0x18fe] could not be reserved
    [ 0.409016] system 00:05: [io 0x164e-0x164f] has been reserved
    [ 0.409017] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.409033] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.409058] system 00:07: [io 0x1854-0x1857] has been reserved
    [ 0.409060] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.409121] system 00:08: [io 0x0680-0x068f] has been reserved
    [ 0.409122] system 00:08: [io 0x0c10-0x0c1f] has been reserved
    [ 0.409123] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.409150] system 00:09: [io 0x04d0-0x04d1] has been reserved
    [ 0.409152] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.409182] pnp 00:0a: Plug and Play ACPI device, IDs ETD0301 PNP0f13 SYN1500 SYN0002 (active)
    [ 0.409206] pnp 00:0b: Plug and Play ACPI device, IDs MSI0001 PNP030b (active)
    [ 0.412551] pnp 00:0c: Plug and Play ACPI device, IDs ENE0110 (active)
    [ 0.416130] system 00:0d: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.416131] system 00:0d: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.416132] system 00:0d: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.416133] system 00:0d: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.416135] system 00:0d: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 0.416136] system 00:0d: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.416137] system 00:0d: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.416138] system 00:0d: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.416139] system 00:0d: [mem 0xff000000-0xffffffff] has been reserved
    [ 0.416140] system 00:0d: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.416142] system 00:0d: [mem 0xf7fef000-0xf7feffff] has been reserved
    [ 0.416143] system 00:0d: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
    [ 0.416144] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.416328] pnp: PnP ACPI: found 14 devices
    [ 0.416329] ACPI: bus type PNP unregistered
    [ 0.422174] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
    [ 0.422176] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
    [ 0.422177] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
    [ 0.422195] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    [ 0.422196] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.422197] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.422200] pci 0000:00:1c.0: BAR 14: assigned [mem 0xaf200000-0xaf3fffff]
    [ 0.422202] pci 0000:00:1c.0: BAR 15: assigned [mem 0xaf400000-0xaf5fffff 64bit pref]
    [ 0.422203] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
    [ 0.422205] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.422206] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.422208] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
    [ 0.422210] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
    [ 0.422213] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.422215] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.422219] pci 0000:00:1c.0: bridge window [mem 0xaf200000-0xaf3fffff]
    [ 0.422222] pci 0000:00:1c.0: bridge window [mem 0xaf400000-0xaf5fffff 64bit pref]
    [ 0.422227] pci 0000:00:1c.2: PCI bridge to [bus 03]
    [ 0.422231] pci 0000:00:1c.2: bridge window [mem 0xf7a00000-0xf7afffff]
    [ 0.422238] pci 0000:00:1c.3: PCI bridge to [bus 04]
    [ 0.422240] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
    [ 0.422244] pci 0000:00:1c.3: bridge window [mem 0xf7900000-0xf79fffff]
    [ 0.422251] pci 0000:00:1c.5: PCI bridge to [bus 05]
    [ 0.422253] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
    [ 0.422257] pci 0000:00:1c.5: bridge window [mem 0xf7800000-0xf78fffff]
    [ 0.422264] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.422265] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.422266] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.422267] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 0.422268] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 0.422269] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 0.422270] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
    [ 0.422271] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
    [ 0.422272] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
    [ 0.422273] pci_bus 0000:00: resource 13 [mem 0xaf200000-0xfeafffff]
    [ 0.422274] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    [ 0.422275] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
    [ 0.422276] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
    [ 0.422277] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    [ 0.422278] pci_bus 0000:02: resource 1 [mem 0

    If I understand this correctly, then you have an Optimus graphics card (couldn't find anything online, but your lspci looks like it). I too have such a setup on my laptop. The thing to keep in mind here, is that your main graphics card is the Intel integrated card. So instead of installing your system like with an nvidia card, you install it like an intel card. Specifically, you would want to follow the instructions on Bumblebee. Once you followed them, the whole graphics part runs on the Intel card. Once you want to play a game or do some other heavy graphics card work you call your application like this:
    optirun wine /path/to/game.exe
    Notice how optirun tells the system to use the nvidia card. It will take a second or two to start it (specifically, enable the card, start another X screen and launch the application on it transparently). Follow the instructions in the Wiki if you have any problems.
    If you don't have an Optimus card (just NVIDIA, no Intel), then don't follow any Optimus instructions, just usual NVIDIA stuff from the Wiki.

  • GE70 2OE won't go past bios screen

    Hi, I bought a new GE70 2OE 7 days ago and I'm having trouble with it.
    It came with window 8 pre installed. I did all the update then upgraded to windows 8.1 and all went fine. I also made my recovery disks before any updates and after all the updates. I installed some programs along with iTunes but after this I kept getting advertisements poping up which was very annoying, I tryed to stop them but they kept appearing so I thought I would do a clean install. Started with disk 1 and whent to 6. When it told me to reboot it went to the bios screen. Thinking I hade hit the del button with my finger. I exited and rebooted but it still goes to the bios screen. When it gets post the boot logo there is some righting the pops up for a fraction of a second, I think it says some thing about nvidia. It keeps doing this all the time.
    Need some help please
    Bios version E1757IMS.511
    Bios build 08/27/2013 12:28:28
    EC version  1757EMS1 ver 5.06
    EC build 07/30/2013
    Help please
    Ian
    I think it says
    >>Checking Media Presense
    >> No media Present

    Hi Dec,
    The scrolling blue bars indicate that the Wondiows operating system is being loaded from the hard drive. If this process stalls during the load then it is likely that either the hard drive itself is defetive or the files which are being loaded are corrupt and cannot be loaded.
    Interfering with the CMOS chip will not correct this problem since the BIOS has already been loaded at this stage.
    If you have access to a bootable CD/DVD (such as Norton Disk Doctor) then I siggest you try booting from it and running a scan of your hard drive. Alternatively you could try re-installing your operating system from the Toshiba recovery CDs but this will over-write any of your own data on your hard drive.
    regards

  • Which SSD for my MSI GE70 2OE-238UK?

    Hello.
    I have just ordered a MSI GE70 2OE-238UK and I'm very excited
    The one I've ordered does not come with an SSD as I couldn't afford it.
    Just wondering will any msata SSD fit into it as I will want to upgrade as soon as I have the money.
    E.G Would this critical SSD fit? If not what will?
    Crucial 480 GB Internal SSD Serial ATA-600 mSATA M500
    Thank you.
    Chris

    Quote from: Chris_Spencer on 14-November-13, 21:12:37
    Excellent thanks! Is there some way You can confirm they have one for sure? I will go ahead and order it now If you can, Hopefully should arrive along with the laptop.
    I know they have a single mSATA slot. I'm not sure if the newer GE70 20E has  mSATA slots or not. If you look at the assembly manual you can see that they have 1 marked, but there is a 2nd one located near the wireless card, but I'm not certain if that is an mSATA slot or not.

  • MSI ge70 2OE issues.

    Hello,
    I have an MSI ge70 2OE now for around 6 months and its starting to have some weird issues. for one. sometimes windows just crashes because of a memory failure, the sound is also crackling at times and my mouse always keeps disconecting. (usb mouse- Razer orochi 2013)
    Any help? should i go back to win8 or should i RMA the laptop?
    //EDIT the issues started when i installed windows 8.1 + the win 8.1 drivers from the MSI website
    --Kalekip21

    Quote from: Kalekip21 on 03-December-13, 02:51:29
    //EDIT the issues started when i installed windows 8.1 + the win 8.1 drivers from the MSI website
    --Kalekip21
    If thats when issues started, and now you are saying that its the same with win 8 clean install there are 2 more options i can only see... Well maybe more but here it goes:
    - make sure you update all the drivers and bios on your clean win 8 installation, then set in bios to go on best performance
    - if the above do not help I would also try to install win 7(maybe a some linux distribution?) just to prove that your issues are not related to an OS
    AND IF non of the aboved helped I would then think about sending it to waranty, but you better try the above one first and also wait for some more experienced users to say what they think
    good luck

  • MSI GE70-2oe - GPU Problem

    Hi
    My notebook runs Call of Duty: Advanced Warfare (and few other games) with Intel® HD Graphics 4600 but It should use GTX765, even If I set in Nvidia control panel to use high performance graphics card.
    Please help, If you know how to force notebook to use better graphic card in games.
    My MSI GE70-2oe:
    -Intel Core i7-4700MQ
    -RAM 16 GB
    -Geforce GTX 765M 2GB DDR5 + Intel® HD Graphics 4600
    -Windows 7 64bit

    Quote from: Svet on 15-November-14, 02:10:15
    right click on the .exe file and select nvdia processor
    64bit versions of those games are still using Intel GPU, even with right click and select nvidia processor.
    Quote from: zipper.sippola on 15-November-14, 04:50:36
    I find your problems pretty odd. I downloaded Planetside 2 from Steam and by default it ran on my GTX 680M (64bit exe). I changed  the gfx processor from Nvidia control panel, 3D settings, program settings to Intel [the exe is Planetside 2(launchpad.exe)] and the game ran then on it. 19 fps on Intel HD 4000, 59 fps (seems to be capped at screen refresh rate) on Nvidia. My drivers are 344.65 and 10.18.10.3958, on Win 8.1 64bit.
    When I'm running this game (64bit) just after logging in to the game (map view), my laptop automatically changes used gpu from Nvidia to Intel HD Graphics, even if I right click on exe file and select high preformance gpu..
    Maybe its Windows 8.1 ??

  • Win 8.1 Upgrade Disabled Twist Touch Screen Fixed

    After a Win 8.1 Upgrade, I had no touch screen function. Calls to Lenovo led nowhere Same with searching Microsoft boards. I fixed the issue on Sunday 6/1- No help from Lenovo or Microsoft.
    For me it was finding two "Unknown Devices" in the HID section of Device Manager which did not have drivers installed. After researching and determining that Win 8.1 will not allow unsigned device drivers, and also seeing the "Update Driver" option failing because the drivers on the laptop that fit the problem were getting an 'INF unsigned driver error', I went through the steps to allow unsigned drivers... Charm Bar>Settings>Change PC Settings>Update and Recovery>Recovery>Advanced Startup>-Restart> Troubleshoot>Advanced Options>Startup Settings> Restart and then Chose #7>Allow Unsigned Device Drivers and Restart again... then Updating the two Unknown Devices with the drivers already on the Twist.... and voila- the errors disappeared and the touchscreen returned to full function.
    I don't know if this happened to many people, but Lenovo had no idea what to do. They wanted me to ship them the laptop and allow them to roll it back to Windows 8. Posting here to distribute it to a larger audience. Maybe someone at Microsoft should call Lenovo too or Lenovo should call Microsoft. The Twist is a great laptop with Win 8.1 when everything works the way it should. 
    Solved!
    Go to Solution.

    Hi Cvj17,
    Welcome to Lenovo Community!
    As per your query we understood that you are looking driver for Unknown device. In some system after installing all the drivers also the unknown device will show in Lenovo Solution Center, hence confirm it once in device manage is there any Unknown adapter is showing in that.
    Please install Lenovo System Update application and run it to verify the driver automatically.
    Unknown Device issue.
    Hope this helps. 
    Best regards,
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Cannot get to dual-boot screen after Win 8.1 upgrade

    Hello,
    I have an iMac with Mavericks. Recently installed Win 8 to dual-boot. Instrux then were to hold OPT button during startup to be presented with options for OS with which to boot.
    Since Win 8.1 upgrade there is no way to get to that prompt. MS/Win help topics not useful (unsurprisingly). I have the original install disk but would far prefer to save my current config of Mav. Thoughts for workaround?
    Cheers,
    Michael C

    holding down option key at bootup not giving you the bootmenu have nothing to do with win8.1
    even if one never installed anything in terms bootcamp at all then holding down the option key should give the option between osx and the restore to last clean osx version
    if you don't get the option then I'd say the cause is not windows as the menu is handled by the bootloader which is before windows takes over

  • Ge70 2OE Laptop with window 8.1 Pro installed unlock virtualization via bios

    I have installed windows 8.1 pro on the c: drive over the original window 8.
    I was told in order to enable virtualization I had to update my bios .
    I went to the site of msi/downloads and went to ge70 2OE and downloaded the bios update for windows 8.1 no raid..
    I did exactly what the help file told me to do. I went just as in the screens.
    I went to the bios but the version number (2.15.1236) was still the same.  Also virtualization was still not enabled .
    What is here the problem. I it windows 8.1 Pro?. Or did I do something wrong in the process?

    Hi,
    Thanks for posting in the forum.
    Regarding your current issue, maybe we could refer to the following similar thread. It may be useful to us.
    Windows 8 does not go to sleep - how to identify the device/app preventing sleep
    http://social.technet.microsoft.com/Forums/en-US/a4a7cc99-a49a-42a8-b2af-aff748623c34/windows-8-does-not-go-to-sleep-how-to-identify-the-deviceapp-preventing-sleep
    In addition, please use the method below to narrow down the cause of the issue.
    How to Find Out What's Keeping Your Computer from Going to Sleep
    http://lifehacker.com/5924010/how-to-find-out-whats-keeping-your-computer-from-going-to-sleep
    Best Regards,
    Andy Qi
    Andy Qi
    TechNet Community Support

Maybe you are looking for

  • My cousin updated her iPad 2 to 7.1 and it said to go to iTunes so she used my Mac.  It said to do a FACTORY RESTORE!  HELP !  She can't get into her iPad at all.

    After my cousin from California did an update on her iPad to 7.1 she could not start her iPad.  It had only a message to hook it up to iTunes.  She had to use my Mac to do it and it said she had to do a FACTORY RESTORE.  This would mean she would los

  • Error in saving the file

    Hi, I have created one report in apex. I have dowload option to download the csv file from report.. i am able to download to download all files accept one report which is giving me the error while clicking on saving the file "Error: Unable to read so

  • EC-CS Cons Chart of Accounts & Financial Statment Version

    Hi Experts, I need your valid input on this issue. We have 6 company codes and wanted to have a consolidation P&L and BS. I have implemented EC-CS and have done all the all necessary configuration and the data is flowing to EC-CS without any problems

  • SAX Parser in Webdynpro for Java

    Hi,      Scenario : To get data entered in the Dynamic table of an online PDF form. I have got the XML of the PDF form. The problem is with Parsing the XML to get the data. I am using SAX parser. The code structure is as given, public class Outercomp

  • 30 days back data from selected date

    Hi Gurus, I have date prompt in a format (02/01/1998(MM/DD/YYYY)12:00:00 AM) and I have report with 4 columns in the 1st column date 2ed column sales 3ed column 30 days back date 4th column 30 days back sales. Date | Sales | 30 days Back date(from th