Gecoding (PTV eServer) connectivity with SCM and TM

I am planning to install a PTV eServer to work with my TM system. The PTV eServer installation guide says that I should establish an RFC connection with my SCM system. Does that mean that I need to do this from my SCM system, or can I connect directly from my TM system (which has SCM Basis 5.1)?
I have read all of the PTV and geocoding-related notes, as well as the eSever and TM isntallation/master guides, but this is still unclear to me.

You got the answer. It is from TM server to the PTV server.  BTW..what is the benefit of going through this pain of having PTV server? It will only give you a straight line. You should look at PC Miler or Ran McNally geocoding to integrate with TM to achieve what you trying to do. It is a waste of time and effort to go through PTV pain and get straight line on distance..... No good use on PTV Geocoding ....just a thought.

Similar Messages

  • I have connected my ipad to my computer and logged into iTunes website. To restore my Ipad I have chosen language, country then it asks you to connect with cable and log into iTunes, I have done that, but cannot find this other information I need to resto

    I have connected my ipad to my computer and logged into iTunes website. On my iPad to restore my my data Ipad I have chosen language, country then it asks you to connect with cable and log into iTunes, I have done that, but cannot find this other information I need to restore from the website. Can you help me please? the 2 replies, I thank you, but this has not helped with my problem.

    Your post is somewhat confusing. To restore your iPad you use the iTunes application on your computer and connect your iPad. Select your iPad in the left column of iTunes on your computer and select General in the right column. You should find the restore choice there.

  • IC WebClient Connectivity with ICI and Third Party Solution (Genesys)

    <b>Hi Techies,
                 Can any body give the information about the IC WebClient Connectivity with ICI and Third Party Solution (Especially Chat and Mail Configuration with Web Client in CRM). We are using CRM 5.0 server with Java+Abap Engine.  I need configuration for Web Client Genesys(Third Party) with ICI configuration.  I dont have idea regarding this. I 've little idea on Business Communication Broker.  Can any help me out in this regard.   Thanks in an advance. If u have any document it can be acceptable.
    Regds,</b>
    Govinda
    [email protected]

    We are looking for a site to site model. I want all the devices on the remote network to be on their own subnet. We need to be able to hit individual remote devices from the head end. The devices at the remote site in turn also need to be able to communicate with each other without having to use the VPN.

  • TS3221 my iphone 4s is not connecting with itunes and giving me a message of unknow error 0xE8000012 Please help me out

    my iphone 4s is not connecting with itunes and giving me a message of unknow error 0xE8000012 Please help me out

    You've managed to permanently damage the phone. As gdgmacguy suggests, buy a new one. Preferably from a legitimate source.
    You may also want to keep in mind that it is illegal to use the Gevey SIM in pretty much every country on the planet. It may still be legal on the continent of antarctica, but that's only because penguins don't use cell phones as a rule.

  • JDBC Thin Connections with SSL and client certificates

    Hi ,
    we are going have a look at JDBC Thin Connections with SSL and client certificates.
    I have two questions:
    1. Is it possible to use SSL connections from JDBC Thin Driver and which release of the driver introduced it
    2. Is it possible to use client certificates with JDBC Thin Driver and which release of the driver introduced it
    Thanks for your help
    regards
    Markus Reichert

    I could not reproduce the error after appending the SSL certificate to the certdb.txt file available under $Jinitiator_Home/lib/security folder.
    Steps to add the SSL Certificate:
    1. Run the form with the https mode in the IE Browser.
    2. Security Alert is raised.
    3. Click on the View Certificate button.
    4. In the Certificate Window, click on the Details tab.
    5. Click on the Copy to File button to copy the certificate.
    6. Copy the certificate and append to the certdb.txt file.

  • When you change PC how to make connection with iphone and new PC

    when you change PC how to make connection with iphone and new PC

    Yes, you can do it the same as any other database. The code would be similar.
    I'd also suggest you not to use the JDBC ODBC bridge for connection. There are other drivers available for that.
    Regards
    xH4x0r

  • I can't set up gmail in my iPad 2. Keep on saying ' can't connect with SSL and ask me whether to connect without using SSL, then I press 'yes' and it said again IMAP is not working and tell me to see network connection and incoming mail server.

    I can't set up gmail in my iPad 2. Keep on saying ' can't connect with SSL and ask me whether to connect without using SSL, then I press 'yes' and it said again IMAP is not working and tell me to see network connection and incoming mail server. No idea how to do anymore. Already tried to figure out. But not work. Can anyone pls help me?

    Nope, doesn't pass verification. I get the spinner for a minute or so, then the alert about setting it up without SSL. Are you suggesting I disable Fetch and Push BEFORE I enter the account details? Because I never get past the account details screen, unless I choose "Set up without SSL" after the warning.

  • Regaining Airport connection with WEP and Siemens Gigaset

    After loosing connection with MBP and Macbook and latest security- and Airport updates, reinstalling of IO80211Family.kext vers.1.5.1 helped.
    It's included in Airport Extreme Update 2007 001.
    Extracted it with Pacifist and copied it the Extensions folder.(as root)
    Important!!
    Repairing permissions and reboot.
    Took me two days to find out.
    Maybe it helps for other third party routers too.
    Intel MacMini works with all latest updated. (so far)

    Can anyone talk me though what to do since I know very little about wireless networking. I am quite prepared to buy a new wireless adaptor for the PC, but don't want to buy something that isn't going to work.
    Unfortunately, you didn't provide much information about your PC or the current external wireless adapter to be of much help. WPA was first supported with WinXP w/SP1; which OS is your PC running? Likewise, early versions of wireless adapters only supported WEP. What is the make/model of yours? Does your PC support PC cards, PCI cards (internal), and/or USB devices?

  • My Iphone 5 hang many times. When I connected with itune and restore setting, my phone just start from the activation. But I can't continue the installation. It shows that can't activate right now.

    I had problems with my iphone 5. After hanging many times, I connected with itunes and restored the settings. But it didn't work. And my phone is now starting with "Hello" to newly activate. Again, it could not proceed but saying "cannot activate now".. please help me how to do. Thank you very much.

    you will need to do a hard wipe or remember the password hard wipe can be found on youtube how to. but this will erase all data

  • After downloading InCopy I click on the downloaded file to install, but the process stops when trying to connect with server and doesn't carry on.

    After downloading InCopy I click on the downloaded file to install, but the process stops when trying to connect with server and doesn't carry on. Can you please help?
    Thanks,

    Agathe.texier which copy of InCopy are you downloading and installing?  Do you receive any specific error messages?  Finally what operating system are you using?

  • Iphone is disabled connect with itunes / and i dont wanna lose my data :(

    my iphone is disabled it says connect with itunes / and i reallyyyyy dont wanna lose my data
    i'd do anyyy thing i dont wanna lose it plzz helpp

    It's in recovery mode. Anything on the phone is already gone. If you didn't back it up as you should have been, then the data is permanently lost.

  • TS1538 after download iOS 7.1 when i run iOS 7.0.1 iphons4s i lost connection with itunes and i cant start my iphone?windows 7, 64bit iTunes 11, iphone 4s

    Downloading iOS 7.0.1 when i start intall i lost connection with iphone and iTunes at my windows 7,64bit. now my iTunes dont find my phone and my windows divice manager show Apple Mobile Device (recovery mood) . how can i start my iphone?

    Hello saimunkhan
    Start with trying to put in your iPhone into recovery mode and then plug it in to iTunes and then follow the steps to restore it. If in recovery mode and still not getting anywhere, check with the article that you came from to troubleshoot it further.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    Regards,
    -Norm G.

  • HT201263 Connection with Itunes and my Iphone 4s IOS7 is not possible.

    Connection with Itunes and my Iphone 4s IOS7 is not possible.  You can see in my iphone in windows explore. But still not the new Itunes for IOS7

    Here's an odd fix that worked for me.(After trying restarting AMDS and uninstalling/reinstalling iTunes* to no avail.)
    I swapped my current USB cable from it's usual port to one of the front ones. That prompted iTunes to, instead of stare blankly back at me, to force up the error message indicating it recognized an iPhone in Recovery Mode.
    This switches iTunes to the Restore from backup screen and gets you back on your way.
    * For anyone having trouble with files being in use when they try to manually delete the 'Common Files\Apple' folder, it works if you go into Safe Mode.

  • BI connectivity with SCM....

    Hi,
         I need make a connection between BI and SCM inorder to install the best practices for the scenario SCM in BI.
    In the BI connectivity B84 document, the steps shows as follows,
    2.2.2     Connecting SAP BI to the SAP SCM system
    Procedure
    Carry out the activity in the SAP SCM system.
    SAP BI     Modeling  Data Warehousing Workbench: Modeling
    Transaction Code     RSA1
    1.     Choose Modeling.
    2.     Choose Source systems.
    3.     Select Source systems in the window on the right.
    4.     Choose the Context menu (right mouse click).
    5.     Choose Create.
    6.     Select SAP Business Information Warehouse.
    7.     Make the following entries:
    Field     Entry
    Available destination                            Destination of your SAP BI system
    Background user in source system     RFCUSER
    Password for source system     welcome
    Background user in BI     RFCUSER (can not be changed in this activity)
    Password for BI user     welcome
    8.     On the dialog box Please log on as an administrator in the following screen choose Continue.
    9.     Log on to the Source System with your administrator user. Choose the correct client.
    10.     On the dialog box Check RFC destination choose Use.
    Can we access RSA1 in SCM system...?
    if so pls guide me......
    Regards
    Santhosh kumar.N

    Dear Arun,
    Happy New year........
    Sorry for the very delayed reply.
    As the upgrade is being carried on the system, i cudn't try the solution provided by you.
    So as per ur guidance, U dont want to me to perform the connectivity from SCM to BI. As i said the transaction RSA1 in SCM client is not accessible.
    If i Perform the Connectivity from BI to SCM alone, will my activity(Best Practice Installation) proceed fine without any errors?
    The Connection between BI to SCM can be done.
    Pls Guide me....
    Regards
    Santhosh Kumar.N

  • Tried to update to newest version. I got error because i didn't have this recovery program disc that was supposed to come with the purchase but it didn't and now my ipod touch 8gb won't connect with itunes and is stuck on a connection with itunes screen

    I tried to update to newest version via pc. I got error because i didn't have this recovery program disc that was supposed to come with the purchase so it says, but it didn't and now my ipod touch 8gb won't connect with itunes anymore and is stuck on a screen displaying an itunes icon with a usb icon.

    oke i'm not done with the whole thing, but i'm doing that right now. Most of the advice I've already read didn't work and at a certain point it said something about shutting down programs then restart. but i notice that there are some pretty important system things in that list and i don't want to mess up my pc :s i'm not a pc genius... and because i'm dutch and my pc-language is in dutch I often have trouble translating and well... i don't always understand the technical stuff in all the articles -_-

Maybe you are looking for