Gedit segfault after update
Hey all,
I just updated to gedit 3.6.2-2 [extra] (x86_64), and now i've just realized that trying to run gedit without sudo doesn't work and outputs this:
$ gedit
(gedit:32389): Gtk-WARNING **: Theme parsing error: gtkmenu.css:21:15: Theming engine 'adwaita' not found
(gedit:32389): Gtk-WARNING **: Theme parsing error: gtkarrow.css:5:15: Theming engine 'adwaita' not found
Segmentation fault (core dumped)
The gtk warning messages were normal but gedit not starting as normal user with segfault is not....
here is the pertinent dmesg
[ 2895.688126] gedit[32478]: segfault at 4 ip 00007fc5b434bd71 sp 00007fff8ec47f30 error 4 in libgobject-2.0.so.0.3400.3[7fc5b4337000+4c000]
running with gksudo and sudo is fine
running 'gedit' as root gives me this which im not sure is related
# /usr/bin/gedit
(gedit:32505): EggSMClient-WARNING **: Failed to connect to the session manager: Authentication Rejected, reason : None of the authentication protocols specified are supported and host-based authentication failed
** (gedit:32505): WARNING **: Could not connect to session bus
I have tried rolling back to the two previous versions with ARM and also compiling using ABS, even deleting ~/.config/gedit, and every time its the 'Segmentation fault (core dumped)'.
I have looked at
https://bugs.archlinux.org/task/10485
https://bugzilla.gnome.org/show_bug.cgi?id=664137
https://bbs.archlinux.org/viewtopic.php?id=130626
I was also playing around with ibus and scim today, but uninstalling them and/or killing them and then running gedit as normal user doesn't help....
So, i'm still stuck. It would be very unfortunate to never be able to use gedit as root again.
Anyone have any ideas?
Thank you.
Linux tcz 3.6.9-1-ARCH #1 SMP PREEMPT Tue Dec 4 08:04:10 CET 2012 x86_64 GNU/Linux
Last edited by endor43 (2012-12-11 22:35:26)
Noted, thank you.
Hmm, I woke up this morning and it is no longer happening. I honestly have idea why, its nice to not have a problem, but disappointing to not understand.
It may come back tomorrow, so I'll keep trying to figure out whats going on and post results. If it does come back, i will post gdb.
Thank you for all your help.
Similar Messages
-
[Solved] gdm-x-session segfault after update to gdm-3.16.0.1-1
After
updating to gdm-3.16.0.1-1, when starting a GNOME session with i3 as
window manager (using i3-gnome from the AUR) gdm-x-session crashes with
error:
$ dmesg
[ 75.134600] gdm-x-session[642]: segfault at 38 ip 0000000000405ae9 sp
00007ffc1aff1430 error 4 in gdm-x-session[400000+11000]
I am able to start all other sessions: GNOME shell, GNOME on Wayland,
only i3.
My system is up-to-date.
Could some one instruct me on how to further debug this error?
EDIT: It was easier to avoid i3-gnome completely and start gnome-setting-daemon from ~.i3/conf. I am still struggling with the keyring, but other than that everything else is working as intended.
Last edited by gjasso (2015-04-15 00:55:55)Thanks for the hint, inxsible, downgrading to JRE 1.6 solved it.
For the sake of others who might run into the same problem: I downloaded jre-6u26-1-i686.pkg.tar.xz from the Arch Rollback Machine, installed it (
pacman -U jre-6u26-1-i686.pkg.tar.xz
) and added
jre
to the
IgnorePkg
line in
/etc/pacman.conf
so it won't get replaced in the next update.
After doing that, Eclipse suffered PermGen Out-of-memory-errors. Adding
-XX:MaxPermSize=128M
to
/usr/share/eclipse/eclipse.ini
fixed that and now m2e installs fine. -
[SOLVED] Audacious segfaults after gtk3 3.2.2-1 update
EDIT 2:
Fixed upstream.
https://bugzilla.gnome.org/show_bug.cgi?id=664137
EDIT: Fixed at gtk3 3.2.2-2
Hi,
I realized today that Audacious 3.1-2 started to segfault after the update from gtk3 3.2.1-1 to 3.2.2-1 (Everything pacman -Syyu'ed)
1 - Press 'F' to open Add Files... dialog
2 - Browse arbitrary folders
3 - Segfault after opening 5-6 folders
No problems with playback whatsoever, hence I posted this here.
Going back to gtk3 3.2.1-1 fixes the problem.
No errors reported by audacious.
gdb:
Program received signal SIGSEGV, Segmentation fault.
in g_type_check_instance_is_a () from /usr/lib/libgobject-2.0.so.0
I have not seen anything reported to audacious or to gtk developers. I am away from home for the next week and do not have a decent Internet connection; so I refrained from reporting the bug for the moment. I know it is annoying when people file bugs and disappear.
Can anyone reproduce the problem?
Thanks...
Last edited by kare (2011-11-30 16:11:58)Here you go: audacious, gtk3, glib2 with debug.
Btw, it looks like I sometimes get different backtraces, I have seen 3 variations. I include 2 here, I forgot to log the other one and cannot get it again.
http://pastebin.com/hNLbGPTG
http://pastebin.com/dcKTb9bC
To reproduce, I do exactly as I say in the first post:
1 - Open the dialog to add files to the playlist. (Hit 'F' on the keyboard, or use the Plus button at the lower left corner of the playlist -- with Winamp skin)
2 - I start going in to random folders and possibly adding files. Adding files is not necessary, just going into a folder, then going back to the parent, and repeating this is enough. The dialog is set to stay open after adding a file.
3 - Crash comes randomly. Sometimes when I descend into the very first folder. Other times I need to go back and forth 5-10 times.
EDIT: Just now, I could reproduce this on a second Arch Linux installation.
Last edited by kare (2011-11-15 17:56:14) -
Slimlock segfault after system update
After updating my system, xmonad fails to spawn slimlock. I get a black screen for a moment, then back to where I was. At first, I thought this was a problem with xmonad, but running slimlock from a terminal frequently (but not always) produces a segmentation fault. Is anyone else experiencing this? Any suggestions on what to do now?
I have the same problem. Practically it can be solved by downgrading to previous version of slimlock (in case it was updated during some recent upgrade). But I cleared my pacman packages cache, so I can't try it out by myself.
-
[solved]many segfault after a pacman -Syu
bad luck gnome-* got segfault after a pacman -Syu. that including gedit, empathy, nautilus, epiphany, gnome-screensaver.... gnome is simply half dead!!! somebody help!
[update]pls scroll down to bsdson.tw #9 for a work around.
Last edited by semson (2011-09-04 14:58:19)here is the pacman log, x86_64
[2011-09-03 20:15] Running 'pacman -Syu'
[2011-09-03 20:15] synchronizing package lists
[2011-09-03 20:15] starting full system upgrade
[2011-09-03 20:18] removed pygobject-devel (2.28.6-1)
[2011-09-03 20:18] removed py3gobject (2.28.6-1)
[2011-09-03 20:18] removed pygobject (2.28.6-1)
[2011-09-03 20:18] upgraded libglapi (7.11-1 -> 7.11-2)
[2011-09-03 20:18] upgraded libgl (7.11-1 -> 7.11-2)
[2011-09-03 20:18] upgraded ati-dri (7.11-1 -> 7.11-2)
[2011-09-03 20:18] upgraded bzr (2.3.4-1 -> 2.4.0-1)
[2011-09-03 20:18] upgraded ca-certificates (20110502-1 -> 20110502+nmu1-1)
[2011-09-03 20:18] upgraded gnutls (3.0.1-1 -> 3.0.2-1)
[2011-09-03 20:18] upgraded libcups (1.4.8-2 -> 1.5.0-1)
[2011-09-03 20:18] upgraded gtk-update-icon-cache (2.24.5-3 -> 2.24.6-2)
[2011-09-03 20:18] upgraded gtk2 (2.24.5-3 -> 2.24.6-2)
[2011-09-03 20:18] upgraded nss (3.12.11-1 -> 3.12.11-3)
[2011-09-03 20:18] upgraded libevent (2.0.12-1 -> 2.0.13-1)
[2011-09-03 20:19] upgraded chromium (13.0.782.215-1 -> 13.0.782.218-1)
[2011-09-03 20:19] upgraded clutter-gtk (1.0.0-1 -> 1.0.2-1)
[2011-09-03 20:19] upgraded evolution-data-server (3.0.2.1-2 -> 3.0.3-1)
[2011-09-03 20:19] upgraded fakeroot (1.17-1 -> 1.18-1)
[2011-09-03 20:19] upgraded firefox (6.0-1 -> 6.0.1-1)
[2011-09-03 20:19] upgraded firefox-i18n (6.0-2 -> 6.0.1-1)
[2011-09-03 20:19] updating gtk immodules... done.
[2011-09-03 20:19] upgraded gcin (1.6.4-2 -> 1.6.5-1)
[2011-09-03 20:19] upgraded icedtea-web (1.1.1-1 -> 1.1.2-1)
[2011-09-03 20:19] upgraded imlib2 (1.4.4-1 -> 1.4.5-1)
[2011-09-03 20:19] upgraded lib32-libcups (1.4.5-2 -> 1.5.0-1)
[2011-09-03 20:19] upgraded lib32-gtk2 (2.24.5-1 -> 2.24.6-1)
[2011-09-03 20:19] upgraded lib32-keyutils (1.4-1 -> 1.5.2-1)
[2011-09-03 20:19] upgraded libdvbpsi (0.2.0-1 -> 0.2.1-1)
[2011-09-03 20:19] upgraded libreoffice-zh-TW (3.4.2-1 -> 3.4.3-1)
[2011-09-03 20:19] upgraded libreoffice-common (3.4.2-2 -> 3.4.3-1)
[2011-09-03 20:19] upgraded libreoffice-calc (3.4.2-2 -> 3.4.3-1)
[2011-09-03 20:19] upgraded libreoffice-extension-pdfimport (3.4.2-2 -> 3.4.3-1)
[2011-09-03 20:19] upgraded libreoffice-extension-presentation-minimizer (3.4.2-2 -> 3.4.3-1)
[2011-09-03 20:19] upgraded libreoffice-gnome (3.4.2-2 -> 3.4.3-1)
[2011-09-03 20:19] upgraded libreoffice-impress (3.4.2-2 -> 3.4.3-1)
[2011-09-03 20:19] upgraded libreoffice-writer (3.4.2-2 -> 3.4.3-1)
[2011-09-03 20:19] upgraded libwnck (2.30.6-2 -> 2.30.7-1)
[2011-09-03 20:19] upgraded linux-firmware (20110727-1 -> 20110822-1)
[2011-09-03 20:19] >>> Updating module dependencies. Please wait ...
[2011-09-03 20:19] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2011-09-03 20:19] ==> Building image from preset: 'default'
[2011-09-03 20:19] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2011-09-03 20:19] ==> Starting build: 3.0-ARCH
[2011-09-03 20:19] -> Parsing hook: [base]
[2011-09-03 20:19] -> Parsing hook: [udev]
[2011-09-03 20:19] -> Parsing hook: [autodetect]
[2011-09-03 20:19] -> Parsing hook: [pata]
[2011-09-03 20:19] -> Parsing hook: [scsi]
[2011-09-03 20:19] -> Parsing hook: [sata]
[2011-09-03 20:19] -> Parsing hook: [filesystems]
[2011-09-03 20:19] -> Parsing hook: [usbinput]
[2011-09-03 20:19] ==> Generating module dependencies
[2011-09-03 20:19] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2011-09-03 20:19] 7210 blocks
[2011-09-03 20:19] ==> Image generation successful
[2011-09-03 20:19] ==> Building image from preset: 'fallback'
[2011-09-03 20:19] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2011-09-03 20:19] ==> Starting build: 3.0-ARCH
[2011-09-03 20:19] -> Parsing hook: [base]
[2011-09-03 20:19] -> Parsing hook: [udev]
[2011-09-03 20:19] -> Parsing hook: [pata]
[2011-09-03 20:19] -> Parsing hook: [scsi]
[2011-09-03 20:19] -> Parsing hook: [sata]
[2011-09-03 20:19] -> Parsing hook: [filesystems]
[2011-09-03 20:19] -> Parsing hook: [usbinput]
[2011-09-03 20:19] ==> Generating module dependencies
[2011-09-03 20:19] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2011-09-03 20:20] 23822 blocks
[2011-09-03 20:20] ==> Image generation successful
[2011-09-03 20:20] upgraded linux (3.0.3-1 -> 3.0.4-1)
[2011-09-03 20:20] upgraded linux-headers (3.0.3-1 -> 3.0.4-1)
[2011-09-03 20:20] upgraded mesa (7.11-1 -> 7.11-2)
[2011-09-03 20:20] upgraded polkit (0.101-2 -> 0.102-1)
[2011-09-03 20:20] installed pygobject2-devel (2.28.6-1)
[2011-09-03 20:20] installed python-gobject2 (2.28.6-1)
[2011-09-03 20:20] installed python2-gobject2 (2.28.6-1)
[2011-09-03 20:20] upgraded qt (4.7.3-3 -> 4.7.4-1)
[2011-09-03 20:20] upgraded telepathy-logger (0.2.10-1 -> 0.2.10-2)
[2011-09-03 20:20] upgraded vim-runtime (7.3.266-1 -> 7.3.289-1)
[2011-09-03 20:20] upgraded vim (7.3.266-1 -> 7.3.289-1)
[2011-09-03 20:20] upgraded wget (1.13.1-1 -> 1.13.3-1)
[2011-09-03 20:20] Updating font cache... done.
[2011-09-03 20:20] wqy-zenhei post install message
[2011-09-03 20:20] ==> Special Note: By default, we disabled the embedded bitmaps,
[2011-09-03 20:20] so that the characters will be displayed as Anti-aliased glyphs.
[2011-09-03 20:20] For those who want to use bitmap font rendering (for 9pt-12pt),
[2011-09-03 20:20] you can modify the enclosed 44-wqy-zenhei.conf and change the line
[2011-09-03 20:20] <edit name=\"embeddedbitmap\"><bool>false</bool></edit>
[2011-09-03 20:20] to
[2011-09-03 20:20] <edit name=\"embeddedbitmap\"><bool>true</bool></edit>"
[2011-09-03 20:20]
[2011-09-03 20:20] Remove 44-wqy-zenhei.conf and 66-wqy-zenhei-sharp.conf symlinks
[2011-09-03 20:20] from /etc/fonts/conf.d/ directory if you have problems with this
[2011-09-03 20:20] package.
[2011-09-03 20:20] upgraded wqy-zenhei (0.9.45-1 -> 0.9.45-2)
[2011-09-03 20:20] upgraded xulrunner (6.0-2 -> 6.0.1-1)
Last edited by semson (2011-09-04 07:10:04) -
[SOLVED] Wrong handling with file types after update
Arch can't "remember" which program to use for certain file type
Example:
after update arch try to open everything (mp3, avi, doc, odt, rar.......) with gedit, when I set mplayer for avi, Arch try to open every file with mplayer, I set writer for odt files Arch try to open every file with writer and .....
And another thing, every file have "text file" icon
Last edited by Joxy (2008-06-25 16:50:16)Take a look here http://bbs.archlinux.org/viewtopic.php?id=50667
-
After update:
[2007-10-26 15:08] starting full system upgrade
[2007-10-26 15:14] upgraded lcms (1.17-1 -> 1.17-2)
[2007-10-26 15:14]
[2007-10-26 15:14] NOTE for drcaw:
[2007-10-26 15:14] ----
[2007-10-26 15:14] ==> dcraw provides the simple commandline tools for raw conversion. If you
[2007-10-26 15:14] ==> are looking for a more sophisticated way consider gimp-ufraw, which
[2007-10-26 15:14] ==> provides a gimp-plugin and a standalone application that can even convert
[2007-10-26 15:14] ==> to 16-bit tiff files (which you can use in cinepaint eg.) So please do a
[2007-10-26 15:14] ==> 'pacman -S gimp-ufraw' to get it.
[2007-10-26 15:14]
[2007-10-26 15:14] upgraded dcraw (1.392-1 -> 1.392-2)
[2007-10-26 15:14] upgraded transcode (1.0.3-1 -> 1.0.4-1)
[2007-10-26 15:14]
[2007-10-26 15:14] NOTE on dvdrip
[2007-10-26 15:14] ----
[2007-10-26 15:14] ==> in order to create ogm/odd video files, you will need ogmtools
[2007-10-26 15:14] ==> pacman -S ogmtools
[2007-10-26 15:14]
[2007-10-26 15:14] update desktop mime database...
[2007-10-26 15:14] upgraded dvdrip (0.98.6-2 -> 0.98.8-1)
[2007-10-26 15:15] upgraded epiphany (2.20.0-1 -> 2.20.1-1)
[2007-10-26 15:15]
[2007-10-26 15:15] --> printing support in gimp depends on gutenprint. Install it if you need
[2007-10-26 15:15] --> printing.
[2007-10-26 15:15]
[2007-10-26 15:15] update desktop mime database...
[2007-10-26 15:15] upgraded gimp (2.2.17-1 -> 2.4.0-1)
[2007-10-26 15:15] upgraded gnome-system-monitor (2.20.0-1 -> 2.20.1-1)
[2007-10-26 15:16] upgraded gnome2-user-docs (2.20.0-1 -> 2.20.1-1)
[2007-10-26 15:16] >> The bonjour plugin is now included in pidgin. If you wish to use
[2007-10-26 15:16] >> it, please install avahi.
[2007-10-26 15:16] upgraded pidgin (2.2.1-1 -> 2.2.2-1)
[2007-10-26 15:16]
[2007-10-26 15:16] --> qjackctl controls the jack-audio-connection-kit server. It runs one instance of
[2007-10-26 15:16] --> it as the user that started qjackctl itself.
[2007-10-26 15:16]
[2007-10-26 15:16] --> NOTE: As of kernel 2.6.12 in concert with pam-0.80-2 and later it is
[2007-10-26 15:16] --> possible to provide realtime capabilities to certain user groups. Running
[2007-10-26 15:16] --> jack, qjackctl and subsequent programs like hydrogen as root isn't
[2007-10-26 15:16] --> necessary any longer nor is it recommended any more!!!
[2007-10-26 15:16]
[2007-10-26 15:16] --> Read: http://bbs.archlinux.org/viewtopic.php?p=97617#97617
[2007-10-26 15:16]
[2007-10-26 15:16] upgraded qjackctl (0.2.23-1 -> 0.2.23-2)
[2007-10-26 15:16] upgraded skype (1.4.0.118-1 -> 1.4.0.118-2)
[2007-10-26 15:16] >>> As of kernel 2.6.18, WINE will not work unless you disable the Legacy
[2007-10-26 15:16] >>> VM Layout, else you will get segfaults!
[2007-10-26 15:16] >>> Please remove the old entry from your /etc/sysctl.conf
[2007-10-26 15:16] >>> vm.legacy_va_layout = 1
[2007-10-26 15:16] upgraded wine (0.9.45-1 -> 0.9.47-1)
I restarted my PC and then gnome got very weird:
First my desktop shortcut to my home folder dissapered
Second all the close/maximize/minimize buttons in the top right corner of every application have dissapered and I have no clue how to bring them back (I tried changing the theme, but the problem still exist)
EDIT: Also no key combinations work: Alt + tab, alt + F1, etc...
Last edited by Dheart (2007-10-26 16:25:33)drummer --
Welcome to Apple Discussions!
We're not staff, but other Mac users here, asking questions and sharing solutions.
You have downloaded (or someone has given you) a free or real cheap "All Caps" font.
Because it was not built correctly, it is conflicting with an often used font on websites like Arial or Helvetica. You need to go through your Font Book application and actually look at your fonts to find that one.
I'm familiar with many fonts, but I don't recognize that one. Most likely because it's free. -
Adobe Photoshop CS2 Error messages after update to mac os 10.4.6
After updated to mac os 10.4.6 everytime I use Photoshop CS2 I receive an error message "Could not complete your request because of a program error"
I did all the workarounds that were described in document 331627 from Adobe's website and nothing worked.
I also subscribe to maxosx.com support and someone suggested removing the legal.localized/Tien...file from the photoshop cs2/legal directory, but everytime I tried to select the directory "legal" from within the finder view, it disappeared and closed the finder window.
HELP!Did you upgrade from a previous version of OS X like 10.3.x or 10.2.x or from a prior version of 10.4.x? If the former, there are probably some files in your previous system folder that need to be restored.
Otherwise, double click Photoshop when it's closed, and then IMMEDIATELY hold Command + Option + Shift. You'll get a box for resetting the settings. Select Yes and maybe that will help.
--Ryan -
I was updating Firefox to the newest version 7.0.1 from version 6.0.2 I think it was, I clicked the restart Firefox button that always comes up after updating. It started updating and then Firefox never restarted like it was supposed to after it was done updating. I then tried to open Firefox and it told me "This application has failed to start because xul.dll was not found." I did have Firefox crash on maybe about 30 minutes or so earlier which bothered me because I have been using Firefox for years and never had it crash on me before but I didn't think much of it at the time it happened because I was able to go back onto Firefox and finish what I had been working on. A while later I checked for updates and updated. The first time I tried to update it didn't work though so I had to shutdown Firefox and reopen Firefox and start the update a second time. It was after the second time that when I tried to open Firefox I got that message about failing to start because xul.dll can't be found. I filed a crash report when my Firefox crashed. This would have been around 1am-2am in the morning that Firefox first crashed and then wouldn't allow me to open it after updating. I have a DELL laptop running the Windows XP operating system but the laptop is probably at least 6 or 7 years old. The laptop will no longer charge so I always have to have it plugged into an outlet. Both my laptop hard drive and my external hard drive give me messages that I am running out of disk space on my hard drive. I bought this laptop 6 or 7 years ago second hand so it could be even older. In short it's a piece of crap and it gives me all kinds of issues but I currently can't afford a new one, but I have never had any problems with Firefox and I use Firefox more than any other aspect of my laptop so it's really really bothering me. May you please help me fix it?
Unfortunately I tried that and it didn't work. Thanks for the help though. I tried to uninstall and it said I couldn't because the file is corrupt or something, but I think I finally got it uninstalled and/or deleted or whatever, but now I try to reinstall/download it again from the beginning and I can't. No matter what I do I can not get Firefox working again. No matter how many times I try to redownload it. Any other suggestions?
-
ios 5 Update New Features says that calendar now has a week view but after updating my iPhone 4 last weekend, I don't see any week view for iCal--just List, Day and Month as in the past. Is the weekly view available for iCal and if so, how do I access it?
Rotate your phone to landscape.
-
Ipod Touch 5 will no longer sync after update 7.1.2
After updating from iOS 7.1.1 to 7.1.2 my Ipod touch 5th gen no longer syncs with my iTunes 11.3.1.1 when connecting it to my computer (windows 8.1) what comes up on my touch's screen is "trust this computer?" I press the "trust" button then a few seconds later I get the disconnected tone from my computer and nothing else happens (it still charges) and just checked it out on my Windows 7 computer (iTunes 11.3.1.2)and it recognized it fine (but the other computer has my playlists) I've tried updating to iTunes 11.3.1.2, updating iPod drivers and uninstalling then re-installing iPod drivers and iTunes is still not connecting to my iPod. Help please.
On your computer go to the control panel (hover in the lower right corner) then programs, add/remove programs
Uninstall iTunes, Apple Mobile Device Service, Apple Application Support then go to apple.com and redownload and reinstall iTunes and try again.
You won't lose any content, you're not deleting that, just the programs that access them.
What is thought to happen is that sometimes a new version of itunes doesn't update the drivers in those other two programs. The only way to update the drivers is to force it by uninstalling the programs which allows itunes to write the correct ones.
My iPad and iPod did exactly the same thing and this is how I fixed it. -
I just updated to Firefox 4.0. I made NO changes to existing settings. After updating, font size of BROWSER headings, tabs, etc. appear so small that I am barely able to read them. (Note that I am NOT talking about font size on web pages--just on browser itself. ) Have used firefox for years--don't want to give it up--but will have to if can't find a solution for this.
I don't know where it is going to look. As I did all the Orthoptera, haing to go to the source of every page, andchanging the links to the moths to the Orthoptera, I had to do the same with other Oders. Now I am on the Diptera, and went to the previously created Orthoptera gallery and changed the text and link from Orthoptera to Diptera. But it still shows text and link, moth, instead. So I continue to have to go to each pages source coded and change individually.
Here is what I don't understand. When I go to the folder that is at C://program files/adobe/adobe photoshop cs4 (64 bit)/presets/web photo gallery, the renamed, copied and modified folder, Diptera is there, and come up in the choices of templates. But the text and link modifications don't occur when the gallery is run. Where could it be going to get the moth stuff, when it goes to this folder for the template?
What you said about the 64 bit makes sense, but I don't know where it could be going to create the gallery when the folder named Diptera is ther. -
HELP! iPod no longer works after update
I've been using my 20gb clickwheel ipod without incident for a year now, my last update had been iTunes 5 and hadn't updated my iPod recently either (why bother..it worked fine?).
I wanted to purchase music from the iTunes music store, but it wouldn't let me unless I upgraded to iTunes 6 and updated my iPod. OK - so I did that- upgraded iTunes to 6.0.1 and updated tghe iPod using the latest updated dated 2005-10-12. Then the horror begins.
On the first attempted synch post update - my iPod screen turned into a folder/exclamation point icon and stopped working. I tried resetting by holding down the center button and menu..it restarted and went back to the same folder/exclamation point icon. No luck.
I've tried restoring it repeatedly and then synching my library back to the now clean and restored iPod and it stops synching at different points and crashes (after 31 songs - crash iTunes - iPod freezes on the "Do not disconnect" screen - strange clicking noise - restore - try again - 58 songs...same... restore ..again...45 songs.. you get the picture).
It worked fine BEFORE the update except I couldn't purchase music. There has been NO change except installing the updates (it hasn't been jostled, dropped or anything). What can I do? The update killed my iPod?!!!! I am at my wits end!!!!!!
-ToryOK..I've tried many things and my iPod is still hosed after updating. I upgraded my Mac to Tiger. I was told that the there might be some issues with synching using firewire with the new update - so I bought a USB cable and tried synching with that.
I have the same issue as before. I can restore the iPod, but when I start synching my music from Itunes back to the blank, restored iPod - it synches up anywhere from 20-200 songs and then freezes (spinning beach ball on one song halfway synched for an hour - then force quit iTunes - and start all over again: restore, synch, crash).
You know, I got burned by the 1st generation 5gb iPod battery issue, then the headphone jack stopped working on my 2nd generation, now my monochrome clickwheel iPod freaks out after Apple forces me to update so I can get my paid music back (it removed, yes, REMOVED my purchased songs because I was still using an older version of iTunes - when I updated to 6 I got them back - how Microsoft is THAT?).
I am really losing my faith in Apple's ability to make a quality product.I am despondent. If anyone has any advice - I would be most grateful... -
My new iPad sound is not working after updating to ios 6.1
My new iPad sound not working after updating to ios 6.1. Headphones are working fine. I tried all the troubleshoot. can anyone know the answer, plz share with me
Hi,
I have exactly the same issue as everyone above. I only get sound through the slider on the ringtone in settings and through my headphones. I do not get any sound anywhere else at all.
I Have tried:
- Updating to iOS 6.1.3
-re starting the device
-checking that the device is not muted. My slider switch is set to mute rather than lock and is unmuted.
-going into general settings and reset all settings
-the device reset several times (waiting until I saw the all important apple logo)
-removing the last few apps I installed.
Nothing at all has worked, please help!
New iPadiPad -
after updating to Firefox 7.0.1, menu bar for Google(web ,image,video,map etc),yahoo, Facebook (message,notification,profile,home) and others site are disabled. even I cant log out from different sites cz the log out bar is completely disabled. I tried with Firefox 4;5 and 6, same problem exist . I tried by active all add ons for facebook, same problem exist. If I use internet explorer , I don't find such problem with it.
How can I solve this problem?Thanks a lot for your swift response. And sorry if it was a bit too hectic to go through my detailed query (which I did because it was misunderstood when I asked previously). As I've mentioned above, I was informed that updating to 5.0.1 would '''require''' me to '''delete''' the current version and then install the new one. And doing so will involve losing all my bookmarks. I guess I should have been more specific and detailed there. By losing, I didn't mean losing them forever. I'm aware that they're secured in some place and deleting and installing the software doesn't harm its existence. What I meant that if I install the new version, I'd have to delete the old one. And after installing the new version, I'd have to transfer them (bookmarks) back from wherever they are. Get it? When it updated from 3.6.9 to 3.6.13, and from 3.6.13 to 3.6.18, I didn't need to follow that process. They were already present on their own.
BTW, I'm having no problems with 3.6.18 but after learning about the existence of version 5.0.1, I'm a bit too eager to lay my hands over it.
Thanks for your help; hope this wasn't extremely long.
Maybe you are looking for
-
My ipod classic has wiped clean and no longer shows in itunes windows message just says need to format disk f but cant format it please help
-
CTS+ Performance Tuning Parameters
Hi Experts, Same Transport is imported in 2 PI Systems lets say PI1 and PI2. In PI1 the import is very fast and in PI2 it is slow.I did a RFC Destination CTSDEPLOY Connection test and found that in PI1 system it is taking much less time than in PI2.I
-
I have downloaded a video on my iPhone 5 & can play it. But it won't play on my iPad it says it can't download it & there is an error. Please can anyone help?
-
How do I get pics onto my computer from my iPod touch?
so ive forgoten how to do this? I think you can do it through iphoto right? Am i right?
-
Are there any batch/background jobs that should be scheduled for security purposes? I know of one but this is only if hr structural authorization is implemented but we are not using it. Thanks in advance!