Geforce 5600 256megs PROBLEMS

Here is the problem,
I never had problems before, I formatted yesterday and reinstalled WinXp with service pack 1 and all the updates. Newest drivers from the Nvidia site. All the updates for my MSI KT6 delta motherboard.
This is what happens, when ever I try to open anything that requires the card, the computer stalls for a little while, but I cant still move the mouse. When I click the mouse a few times, it freezes, and then the computer shuts down. The error report says that the problems lies in the Nvidia drivers.
I have tryed different drivers, the same problem occurs. I have updated everything that I know of. I never had this problem before, now I do.
What can I do?
Thank you very much in advance for your advice.
Nick

Ccat,
For us to help you better, you need to make a signature, list your hardware,
O/S and PSU specs!
Are you saying that your Geforce 5600 work ok in this rig before you
reformatted?
After you reformatted and reinstalled XP and SP1, what did you install and in
what order?
Please list what you installed and the order in which you installed them!
The H2O Guru
If You Build The Circuit, The Electrons Will Come!
Enermax 550 v1.2 EG651P-VE PSU
+3.3V=36A / +5V=36A / +12V=36A
+5V & +3.3v = 200Watts
nVidia MB Chipset Drivers v3.13
nVidia VGA Drivers v56.72

Similar Messages

Geforce 5600 SE Display Adaptor

Hi am i being really stupid?? my pc was bought 18 months ago with a Geforce 5600 SE Display adaptor - graphics card - which I understand includes a tv tuner card/ chip. together with Personal Cinema software
i want to be able to tune in and watch tv on it - HOW??? I've tried all the VGA updates and the WDM drivers...but still when it comes to autotune the tv nothing and then program closes . I am trying to tune / watch tv using Personal Cinema/ Intervideo DVD...
ideas please

is this an MSI card? sorry, this forum is only for MSI TV tuner products, and i doubt if anyone has any knowledge of Personal Cinema program. are you sure the card has a tuner chip, or it just has video-in features?

K7T266 Pro R and Geforce 2 GTS problem

Hello everyone. I have been experiencing a problem for some time now regarding lockups and crashes caused by my video card, which vary in severity depending on the driver version used. Since I'm using an MSI K7T266 Pro Raid mobo (version 1) I thought I'd post my question here.
The exact problem depends on the driver version. Using any Nvidia Detonator drivers at version 40 or newer, my system becomes extremely unstable. On first booting everything seems fine, however if I try to open my Geforce display properties the Windows freezes during the redraw of the display properties window, which goes blank. Sometimes I can call up Close Programs Dialog, which shows DDHELP in the list, and [not responding]. I've never actually gotten an error message from DDHELP or any other error message -- perhaps the computer jams too hard for Windows to get one up. I've seen reports around the Net about DDHELP problems from things like DirectX 8.1, but they're never quite like my problem. The problem is identical on DirectX 8.0, 8.1, and on 9.0.
No matter what I try to do in Windows with these drivers installed, the computer will lock up in seconds. For example, if I then open IE 5.5, I might be able to get as far as a page or two before the similar thing happens: during the window redraw the computer locks up (usually with a blank or partially-redrawn window), sometimes causing the mouse to lock and sometimes not, and then if I can get the Close Program Dialog open DDHELP has appeared and is Not Responding.
The most stable driver version I've found so far is 29.42, which does not cause the lockup above and never causes DDHELP to appear. However, it is quite unstable as well, and causes Windows to lock up sporadically during 2D window redraws in various programs. For example, when calling up a Save Document dialog or when opening a pulldown menu the program will lock either before any of the redraw becomes visible on screen or when the new dialog box is "skeletal", only partially drawn. Sometimes the crash is severe enough that I have to do a cold restart on my system.
The other problem is that sporadically garbage blocks will appear in portions of my screen, like old windows and color bands popping up that do not refresh. This often happens to me in Photoshop 6, and happens usually when I'm scrolling down a window or something.
These problems with version 29.42 all appear to be 2d window-drawing related. I do not have any problems with 3d games with 29.42. However, the new reference drivers are so unstable on my system that I can't even try to open them.
With 29.42, the most stable drivers I've found so far, some kind of lockup due to redrawing windows almost always occurs within an hour (sometimes minutes) of booting up.
For what it's worth, dxdiag tests just fine.
I was hoping someone could help me figure out what's causing the trouble, what driver I should use, and how to resolve it. If possible, I'd really like to use the newer drivers as I've been told they're much faster. In any event, I hate having such an unstable system where lockups could occur at any moment!
Here's the lowdown of my system:
-MSI K7T266 Pro Raid [1] mobo (MS-6380)
AMIBIOS date: 5/1/2001
VIA 4in1 drivers version 4.45
ACPI power management disabled
PnP Aware OS enabled
-256 meg PC2100 SDRAM with 266 mhz FSB
2.5 cas latency
-AMD Athlon 1.33 gb with 266 mhz FSB
-Asus AGP-V7700 (Geforce 2 GTS) 32 mb
AGP 4X, Fast Write enabled, Aperture size 128 mb
current drivers: Nvidia reference 29.42 (also 40+)
on IRQ11 (shares with my Ethernet card)
BIOS version 2.15.01.14
-Windows 98SE
-DirectX 9.0 (also tried 8.1 etc)
-Soundblaster Live! 5.1 on slot 3, drivers from 5/2002
-Viewsonic PF790 monitor
-C drive is 30gb Western Digital 7200rpm, FAT32
-D drive is Raid 0 striped array, pair of 40gb 7200rpm
-Network Everywhere Fast Ethernet Adapter on slot 5
-no memory resident programs on loadup except for WinPoET, Explorer, Systray
If there's anything I've left out that could help, let me know!
Thanks to anyone in advance,
Raphael Tehan

Quote
Originally posted by backwoodz
You should post this in the VIA forums........If was me I would first swap the nic card to a differnt slot and try to stop the sharing of videos irq.....secondly try relaxing your memory timings to the most laxed setting
Thanks, I realized after posting this was the incorrect forum. I've put it in the VIA Socket A boards area, and also am trying the Via Arena forums.
Are you talking about my mainboard or graphics card memory?
Here's what I've got set under Advanced Chipset:
Configue SDRAM timing by: SPD
SDRAM Frequency: HCLK
SDRAM CAS# Latency: 2.5
SDRAM Bank Interleave: disabled
SDRAM 1T command: enabled
AGP mode: 4x
AGP comp driving: auto
Manual AGP comp. driving: CB
AGP Fast Write: enabled
AGP Read Synchronization: disabled
AGP aperture size: 128 mb
Do any of these settings seem problematic to you?
Thanks.

K7T266 Pro Raid and Geforce 2 GTS problem

(Originally posted to wrong group)
Hello everyone. I have been experiencing a problem for some time now regarding lockups and crashes caused by my video card, which vary in severity depending on the driver version used. Since I'm using an MSI K7T266 Pro Raid mobo (version 1) I thought I'd post my question here.
The exact problem depends on the driver version. Using any Nvidia Detonator drivers at version 40 or newer, my system becomes extremely unstable. On first booting everything seems fine, however if I try to open my Geforce display properties the Windows freezes during the redraw of the display properties window, which goes blank. Sometimes I can call up Close Programs Dialog, which shows DDHELP in the list, and [not responding]. I've never actually gotten an error message from DDHELP or any other error message -- perhaps the computer jams too hard for Windows to get one up. I've seen reports around the Net about DDHELP problems from things like DirectX 8.1, but they're never quite like my problem. The problem is identical on DirectX 8.0, 8.1, and on 9.0.
No matter what I try to do in Windows with these drivers installed, the computer will lock up in seconds. For example, if I then open IE 5.5, I might be able to get as far as a page or two before the similar thing happens: during the window redraw the computer locks up (usually with a blank or partially-redrawn window), sometimes causing the mouse to lock and sometimes not, and then if I can get the Close Program Dialog open DDHELP has appeared and is Not Responding.
The most stable driver version I've found so far is 29.42, which does not cause the lockup above and never causes DDHELP to appear. However, it is quite unstable as well, and causes Windows to lock up sporadically during 2D window redraws in various programs. For example, when calling up a Save Document dialog or when opening a pulldown menu the program will lock either before any of the redraw becomes visible on screen or when the new dialog box is "skeletal", only partially drawn. Sometimes the crash is severe enough that I have to do a cold restart on my system.
The other problem is that sporadically garbage blocks will appear in portions of my screen, like old windows and color bands popping up that do not refresh. This often happens to me in Photoshop 6, and happens usually when I'm scrolling down a window or something.
These problems with version 29.42 all appear to be 2d window-drawing related. I do not have any problems with 3d games with 29.42. However, the new reference drivers are so unstable on my system that I can't even try to open them.
With 29.42, the most stable drivers I've found so far, some kind of lockup due to redrawing windows almost always occurs within an hour (sometimes minutes) of booting up.
For what it's worth, dxdiag tests just fine.
I was hoping someone could help me figure out what's causing the trouble, what driver I should use, and how to resolve it. If possible, I'd really like to use the newer drivers as I've been told they're much faster. In any event, I hate having such an unstable system where lockups could occur at any moment!
Here's the lowdown of my system:
-MSI K7T266 Pro Raid [1] mobo (MS-6380)
AMIBIOS date: 5/1/2001
VIA 4in1 drivers version 4.45
ACPI power management disabled
PnP Aware OS enabled
-256 meg PC2100 SDRAM with 266 mhz FSB
2.5 cas latency
-AMD Athlon 1.33 gb with 266 mhz FSB
-Asus AGP-V7700 (Geforce 2 GTS) 32 mb
AGP 4X, Fast Write enabled, Aperture size 128 mb
current drivers: Nvidia reference 29.42 (also 40+)
on IRQ11 (shares with my Ethernet card)
BIOS version 2.15.01.14
-Windows 98SE
-DirectX 9.0 (also tried 8.1 etc)
-Soundblaster Live! 5.1 on slot 3, drivers from 5/2002
-Viewsonic PF790 monitor
-C drive is 30gb Western Digital 7200rpm, FAT32
-D drive is Raid 0 striped array, pair of 40gb 7200rpm
-Network Everywhere Fast Ethernet Adapter on slot 5
-no memory resident programs on loadup except for WinPoET, Explorer, Systray
If there's anything I've left out that could help, let me know!
Thanks to anyone in advance,
Raphael Tehan

Quote
Originally posted by backwoodz
You should post this in the VIA forums........If was me I would first swap the nic card to a differnt slot and try to stop the sharing of videos irq.....secondly try relaxing your memory timings to the most laxed setting
Thanks, I realized after posting this was the incorrect forum. I've put it in the VIA Socket A boards area, and also am trying the Via Arena forums.
Are you talking about my mainboard or graphics card memory?
Here's what I've got set under Advanced Chipset:
Configue SDRAM timing by: SPD
SDRAM Frequency: HCLK
SDRAM CAS# Latency: 2.5
SDRAM Bank Interleave: disabled
SDRAM 1T command: enabled
AGP mode: 4x
AGP comp driving: auto
Manual AGP comp. driving: CB
AGP Fast Write: enabled
AGP Read Synchronization: disabled
AGP aperture size: 128 mb
Do any of these settings seem problematic to you?
Thanks.

Nvidia Geforce 650m driver problem for windows 8.1 on macbook pro

Hey guys. I installed windows 8.1 on my macbook pro (mid2012, Intel core i7, retina, Geforce 650m) of course only for game, but I have a disappointing problem with the graphics driver. First I tried to instal graphics card driver by bootcamp (not the last version, the one before the last) .It started to install drivers one by one starting with graphics card, but suddenly the screen got black and remained black forever! I restarted the windows and guess what! after windows logo it got black and nothing more! Then I installed windows again and tried to install driver from windows update. It checked for update and found the driver for it and downloaded it and started to install, but again the black screen !!! Please help me thanks.

DemetriAA wrote:
no this does not work. bootcamp drivers are broken for windows 8.1 on an efi install. apple is withholding the discreet gpu drivers from microsoft to trick people into thinking osx is more stable/efficient and thus windows cannot detect which gpu it is supposed to use when it can see both. the discreet gpu is hidden in the fake bios setup that bootcamp wants you to install with. the problem with doing this is that the more powerful gpu is all you can use in windows so the computer runs more hot and is louder which is annoying and hard on the battery life.
thanks apple, if i knew that when i bought the laptop i would have gone with something else.
This is not correct. If you force an EFI installation on a preUEFI Mac, you will see GPU and Audio errors. A non-EFI Hybrid MBR installation works correctly. Does Windows have the ability to switch GPUs? OS X, using external monitors, uses the non-Intel discreet GPU and the machine does not run hot. If Windows can provide dual-GPU support (which they have) and also provide GPU-switching (missing), this can be done. Can it be done for older hardware, highly unlikely. MacRumors has threads with PCI Register changes to expose the Intel GPU and the machine still runs hotter.
From Bootcamp Info.plist...
       <key>PreUEFIModels</key>
        <array>
                <string>MacBook7</string>
                <string>MacBookAir5</string>
                <string>MacBookPro10</string>
                <string>MacPro5</string>
                <string>Macmini6</string>
                <string>iMac13</string>
        </array>
You can verify your Model Identifier from How to identify MacBook Pro models - Apple Support. The 2012 MBPs are 9,x models.

I have a Geforce 3 Boot problem

hi , looking for some help for a problem i have , i have a pc wich has an MSI MS-6524 board based on the SIS645 chipset, running on a P4 2.0ghz and 512 Mb of RAm, with a Geforce 3, it ran without problems for about a year then all of the sudden out of the blue one day it stopped booting , it would go all the way to the windows xp loading screen then all of the sudden the screen would go black, it enters safe mode fine and when i uninstall the nvidia drivers and attempt to load normally it loads fine up to when i reinstall the drivers, i formatted and reinstalled countless of times seeing if it would work and nothing , ive loaded bios defaults, downloaded mainboard's latest drivers and still nothing , weirdest thing is , i have an ATi radeon 7500 and it works flawless in the pc, and a friend of mine tested his radeon 9700 and it worked fine too , however when another friend of mine lent me his GF FX 5200 it didnt work either, so i must be guessing its an nvidia problem with my board , however i dunno what may have caused this because it used to work fine.

I bet that you have a bad Vidio Driver File..As this happend to freind of mine, First If you have Never gone into your "Regedit" then I suggest that you either get someone that has to help you, or dont blame me if you delete something that you were not supposed to .But if you take your time you will be fine..Go to "Start" and Run, now type in Regedit, then hit OK, Go to HKEY_LOCAL_USER, go down to the +Software, open it, go down to NVIDIA and Highlight it and Delete, Now go back and go to HKEY_LOCAL_MACHINE, go to the +Software, Go to NVIDIA, highlight and DELETE, Thats it for the Registry..Now go to Control Panel, "Add and Remove Programs" and Find any NVIDIA Vidio Drivers, and Remove...Then your PC will ReBoot, and now you can Load Fresh New NVIDIA "Forceware" Drivers and you should be just fine.......Post back and let us Know if it worked for you, or if you still have Issues, OK?...........Sean REILLY875

MS-6340M /GeForce FX 5200 problem??? Help!

I just bought the MS-6340 motherboard with Athlon 1.1 gig processor. I also bought the new Gainward 660/Pro nVidia GeForce FX 5200 128MB Video Card. THe Card is a 8X AGP and the motherboard has a 4X AGP slot.
My problem is that my computer completely freezes up all the time with that card in. I've put older cards in and the PC runs fine. I've currently have Windows XP, but I started out installing WIndows ME and 2000, and it locked up on them all. I have the latest 44.03 nVidia drivers installed. I also have the latest 4.7 BIOS installed for the motherboard.
Has anybody had a similar problem? Any help would be appreciated.

i have a GeForce FX 5200 and i have just a heatsink, no fan, and i overclock QUITE a bit, i bought off newegg.com, a universal video card fan, that works on 5200's, and now i can overclock past fx5200 ULTRA speeds!!!!!! its awesome!!! this fan is a vantec, and also comes with thermal paste, check it out, for $6.05, its awesome! click here - http://www.newegg.com/app/ViewProductDesc.asp?description=35-110-102&depa=0
or, go with the copper one, little bit more $$ though - http://www.newegg.com/app/ViewProductDesc.asp?description=35-110-103&depa=0
that definentally should be sufficient cooling
hope this solves your prob like it did mine!!!

645 Ultra and Geforce 4200, major problems, please help!!

I have read through this forum and have seen different problems with this mobo and geforce cards, so first here is my set up.
P4 1.6A
645Ultra Rev 1 Bios 1.9
Visiontek 4200 128mb ddr
IBM Hard Disk 7200 rpm
300W Codegen PS
256 Corsair DDR333
Let me put it like this: With just the video card in, and "installing" winxp on a fresh formatted drive. The card/board crashes the install. I had been using a radeon 7500 on my system for awhile with no problems, but wanted more power, so bought geforce 4. Did the clean uninstall of radeon drivers,bla bla, and install the geforce 4. Nothing but problems, randoms hangs, and eventually would not even let me boot past the bios screen. When I boot in safe mode, it crashes my computer. When I put back in the radeon, no problems.
So I reformatted my whole comp, knowing anyway that it was not xp, so I had to use the radeon to reinstall xp since installer crashes with geforece card.(bye the way I tried my older geforce256 SDR, and same problems). I install fresh system, but do not install radeon drivers, turn off comp, put in geforce card on fresh install, again no drivers, and it still crashes my system...random hangs. So I install the drivers from the install CD, forgot which version, and again still crashes. So can anyone help me. This is clearly a mobo card conflict.
Could it be IRQ settings or Powersupply not enough?
Thanks for any help

I would not say it is a PSU problem as you have the same issues with the other cards.
IRQ could be if you have anything plugged in PCI slot 1 and 2.

MSI Geforce 4800SE reinstall problem

When my captures stopped working with the vivo after a friend changed the dual display settings, I tried to reinstall the drivers after an uninstall. Problem is, When I go to the Add Hardware Wizard, Only ati pops up, which was uninstalled along time ago. So I select Have Disk, and click the nv4_disp.inf of my msi driver directory and nothing happens, I go back to the beginning where I have to choose select disk. So I try to use Device manager with show hidden devices checked, and agp adapter isn't even in there to use? Also Scanning for new devices does nothing. Help!? Any different roads to take? I don't want to have to reformat as it would be to much work to burn all my Video captures at this time.
MSI Geforce 4800 SE Vivo
A7N8X Deluxe
Athlon 2400/retail hs
300 psu
120mb 8mb/c WD

Try this: nVidia driver fix
Don't use the MSI drivers, go download the 41.09 drivers from nVidia's site and the 43.45? drivers have been giving ppl problems so I don't recommend using them...
Cheers!! 8)

GeForce FX5200 - big problem

Sorry for my English, it's not my native language.
1. I can't even start my OS. It's the graphic card problem for sure, because when I'm changing it for any other card it works fine. Ok, so when my OS (XP) is loading, my monitor just turns off and the led is blinking. All what can I do is reset or turn of the computer. There was no fan on the vga when I bought it (2 years ago). It was working excellent. And now I can't even run my OS.
Does anyone of you know what's the problem ?
2. Second problem - tvout. When I connect my tv, screen on tv is weird, I don't know how to describe it but it looks like the colours are brightened. I can't do anything with it, I was trying some setup but nothing works. It was working good too, but it screwed up much more sooner then my first problem. :D
MSI GeForce FX5200 128 mb, DVI, tvout
nVidia Drivers
Thanks in advance for the replys.
Pawel

Quote from: ivangelion on 18-June-06, 05:01:18
you can try, use fail safe mode, pressing F8 when booting, then set to start in failsafe mode with vga, then if you can get in to windows then go to video properties and change the refresh frecuency to 60hz in any resolution and restart, if do not work do it again in fail safe mode (no vga mode) if the last thing you see is the windows logo with the loading bar then the problem is monitor out of refresh values, that turn of the monitor, another thing may be if you conect a tv like a monitor without your pc monitor, sometimes the main monitor is set to tv so when start windows the pc monitor turn off, if you can see something in your tv then you must change to "clone view" the multidisplay setting
ok mi english is not good too so i hope to help you in some way
true but that dont explain --> "I was able to start an OS, but in the game it crashed again."

GEFORCE 5200 video Problem

HELP ! I have a 128mb Nvideo card (GEFORCE) on a AMD Via motherboard. I have added the drivers and ran DX 9 in the right order. THe problem I have now is that if I run a number of programs the screen blanks for a couple of seconds every few minutes. I have tried updating the video drivers and checked fro conflicts (none found) Has anyone any ideas???

Hi, welcome to the forum.
I think we will need a bit more data on the system that u use be4 we can determine the cause.
Could u post following data:
Type of CPU
Type of mainboard
Type of PSU
Operating system
What and how many memory
Also, when does it occur, with what programs, does it allways occur. Does it come back spontausly, or do u need to do something (reboot) before u get it working again.

Mce2005 rollup 2 and geforce on mega180 problems

Hey all
long time no see hu? wassup Stu my man ?
well I have a problem, I have my mega180 connected to my TV sony (100hz) with the integrated geforce
I updated my mce2005 for the rollup 2.
the problem is, under windows no prob my screen is perfect, but now when I switch to mce, it changes the resolution automatically.
so my videos are cut on the l/r borders :(
my drivers are .72 mce, .79 are specific for rollup 2 but the geforce4 is not now in the compatible list !!! grrrrr I can't install them :(
any ideas ?
thanks !

i haven't had chance to try any myself, but i notice that the Geforce 4 is still listed in the newer forceware driver versions, so maybe you could try them
you're right! i tried to install the 77.79 MCE drivers on my MCE system (as listed in my sig, it uses the same chipset as the Mega 180) and it said it couldn't find any compatible hardware

Installing NVIDIA GeForce GTX 780 problem

I have QU297AA#ABG h8- 1130a as bought from retail and planned to do some upgrades. I purchased the NVidia GeForce GTX 780 Graphics Card and was told I would also need a 600W or better power supply, so I also purchased a 750W one. I have installed everything correctly (to my knowledge) and when I try to boot up the PC, it reaches the welcome screen which is blue and with the HP logo asking me to "press escape for startup menu". That does not work and the PC then beeps 4 times with long pauses in between before changing to a black screen at which I have to hard shut down the PC.
I know that the power supply is fine becuase when I saw back to the graphics factory card, it is fine. I have read a lot of support FAQs and they have told me to update the BIOS and to uninstall my old graphics driver. I have done both and the problem still persists. I have upgraded my BIOS from AMI 7.09 22/7/2011 to AMI 7.12 12/10/2011 which was the latest available.
According to the EVGA manual, the beeping sounds are from one of the following:
1. The card is not seated properly (unlikely).
2. There is a problem with the motherboard's graphic card slot (impossible, as the other one works).
3. Supplemental PCI-E power is not connected to the graphics card (it most definetely is).
4. Graphics card problem (unlikely, it is brand new).
It then says the problem is probably with the motherboard and to contact you.
I hope this has been enough information but I would like to know all of my options.

BossClock wrote:
Video Card is EVGA GeForce GTX 780.
PSU is Thermaltake SMART 750W.
Motherboard is Chicago - IPISB CH2.
OS is Windows 7.
I will take a look at the specs on your MOBO o see which PCIe spec the slot is. The specs don't state the version. I will have to ask an HP internal source. It may take a day for me to get back to you, but as soon as I know, you will as well.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

GeForce FX 5200 problem

Hi! i just got a geforce FX5200 8X card. The problem is that my games now run slower, and when i go to the Advanced Options in the display menu, it shows "PCI" as my video bus!!! What's going on here?
A4Tech Tower
PSU 400W A4Tech
MSI KM4M
CPU Athlon XP 2500+ Barton
256 RAM DDR PC-2100
GeForce FX5200 8X 128 Mb
Western Digital 40GB 5400 RPM
Lite-On 52X CD-rom
Samsung 52-24-52 CD-RW

i have a GeForce FX 5200 and i have just a heatsink, no fan, and i overclock QUITE a bit, i bought off newegg.com, a universal video card fan, that works on 5200's, and now i can overclock past fx5200 ULTRA speeds!!!!!! its awesome!!! this fan is a vantec, and also comes with thermal paste, check it out, for $6.05, its awesome! click here - http://www.newegg.com/app/ViewProductDesc.asp?description=35-110-102&depa=0
or, go with the copper one, little bit more $$ though - http://www.newegg.com/app/ViewProductDesc.asp?description=35-110-103&depa=0
that definentally should be sufficient cooling
hope this solves your prob like it did mine!!!

Ideapad E570 nVidia GeForce GT630M driver problem under Windows7

Hi Folks!
I'm using the above mentioned notebook with Windows7 Ultimate SP1 64-bit. I tried to use the GeForce card with the latest dirver (8.17.12.8590) found on Lenovo's support site. Even if I tried to access the 3D settings in nVidia control panel (it should to display the rotating 3D nVidia logo), Windows will occur a "blue death" (exeption error). Same situation when I try to run a 3D applicaton like 3DMark...
The situation is same with the latest driver from nVidia.
Please, give me an idea how to fix this.
Cheers!

RizalYara, welcome to the forum.
Here is the AMD driver provided by HP for Win 8.1. I suggest installing it to see if it solves your problem. If this doesn't help, I suggest going back to the seller for help. They should either help you fix it or reinstall Ubuntu.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Geforce 5600 256megs PROBLEMS

Similar Messages

Maybe you are looking for