[GeForce 6] nx6600 vtd256 driver problems

Hey guys, new here. I just bought a nx6600 vtd256 video card and am having problems. First, after installing the card (physically), and the comp boots up, i start to install the disk software (driver and programs). After installing the drivers for the card, it reboots and i get my post screen, then my windows xp screen (with the green bar running across) but when the screen goes to where it says welcome, all i get is a black blue screen and my mouse is in the hour-glass shap and locked up. I went to safe mode, uninstalled the card, and rebooted. No prob, booted fine. Then i just run the MSI live update 3, get the newest drivers, and restart. Bam, same thing. Safe mode, uninstall, and go again. Boots up, i go to this forum and see a post that says to download from nvidia. End up sith same result after install and reboot. I did notice though, that i am not getting the nvidia display properties in my display properties window (the extra program controls are not installed). Any help would be greatly appreciated. Also, power supply numbers are as follows, +12 12a 144w, +5 35a +3.3 24a (+5 and +3.3 = 190w)

also i have noticed, that witht the card installed, it doesnt show up at the very first of a power on.

Similar Messages

  • [GeForce 6] NX6600-VTD256 AGP and HDTV output

    I am looking for a VGA card for my mediacenter on a HDTV plasma.
    On the website it says that the NX6600-VTD256 has an HDTV-vivo cable as accessoire.
    Is this cable also available in the Netherlands, and does it come with the package ?

    Quote from: Jean-Paul on 14-May-05, 17:09:58
    Thanks for the reply.
    although it does not come with the component video cable, can you tell me if it is possible to connect component video to the adapter.
    Do you have an picture of the adapter ?
    Yes it is possible, but I haven't done it because I don't have a HDTV. Scroll down the page to the bottome you will see the adapter on left side. It's component video output, not input.
    http://www.pcstats.com/articleview.cfm?articleID=1714

  • [GeForce 6] NX6600 VTD256 Replacement Drivers

    I recently formatted my buddies computer. He lost his cd with the drivers for the card. I've downloaded drivers, but we still can't get the computer to play video. Whenever you try to load a video, it'll just jack the media player resources up to 99 and do nothing. Where can I find the replacement drivers for the card? I'm thinking i never grabbed the right drivers.

    Hello! I am also having similar problems. My system specs are:
    MSI Neo 648F Mobo
    1Gb (512 x 2) PC3200 Kingston RAM
    MSI 6600 256MB VTD
    1 Seagate 80Gb HDD
    SoundBlaster Live 128
    3 Com 100Mbit NIC
    OS: Win XP SP2
    I used the MSI Live Update Utility. Mobo's BIOS was flashed, XP all updates installed. I downloaded MSI driver 77.6? for the 6600. Here is what happens.
    With the original 6600 drivers(66.xx) on the CD, games work fine etc. If I install any other newer MSI driver, games work fine, BUT Real Player, DivX, Windows Media Player 10 use 99% of the CPU. I rolled back to the 6600 CD Driver and both games and  video now play. Has anyone found a work around for this? Any help will be most appriciated.

  • NX6600 VTD256 intermittantly found as new hardware on XPPro startup.

    Hello everyone,
    I'm having a problem with my NX6600 VTD256 intermittantly being found as new hardware when starting up my computer. When the found new hardware wizard pops up I simply choose no for the installation and reboot. Every time I've done this with 1 exception the following startup is normal with the card found. ( the 1 exception was catastrophic and is documented in the linked thread)
    Here is a link to the thread I have going in the MotherBoard section of this forum because I first thought it to be an IRQ issue. All my system Particulars and what I've tried are in the thread. Warning long read!
    Thank you in advance for any suggestions that may be offered.
    Mike
    Thread:  https://forum-en.msi.com/index.php?topic=98247.0

    Hi Richard,
    I did follow the advice in the windows drivers we recomend here thread and downloaded Driver Cleaner and used it following the instructions for removing Nvidia drivers. This is my second fresh install of winXP. Both on a new formatted hard disk.
    Here are my IRQ settings.
    Although I disabled all the periphials I could in the Mobo Bios. USB, Serial ports, Parallel Port, and LAN. I also removed the 2 dvd's from the computer and had only 1 sata HDD. 1 gig mem stick, and the VGA card hooked up. I there were quite a few open IRQ's and nothing was sharing any.Here is what happened:
    Quote
    It didn't take as long as I expected!!!!
    I disabled everything that I could in the Mobo Bios Sound,USB, Lan, Serial Ports, Printer Port and disconnected the power and cables to the 2 DVD's, and power and cable to #2 SATA drive! Had to start up about 30 times and Pooof I think my VGA card just went belly up!
    On the last 4 startups the resolution is stuck on 640 X 480 X 60 Hz  4 Bit. Now the found new hardware wizard does not come on but the "Your screen resolution is set at a very low level would you like windows to automaticlly adjust it?", comes on!  I clicked yes but nothing changed! I tried to go to settings to change it but the only setting I could access was the Display Frequency and when I changed it and clicked OK nothing happened it reverted back to 60 HZ!
    I checked in Device manager under Display Adaptor and it says the device is working normally, All the drivers seem to be there as well.
    What now?  I tried to restart it 5 times and it is stuck on 640 X 480 X 60 Hz 4 Bit.
    Quote
    Well my panic attack is over! Hehehehe The fun never stops with computers does it??? Grin
    What I did do before reading your reply was, BTW I just finished with it and came on here to post and saw your reply,
    What I did do was uninstall the NX6600 with device manager and restarted after I hooked everything I had disconnected back up to the computer and re enabled all the disabled devices in the Mobo Bios.
    Well Windows found the video card and I reinstalled the drivers that came with the installation cd.
    And all is well again which leads me to the conclusion that I have a VGA driver problem.
    I then removed the Nvidia drivers removed norton system works completely from the computer. and installed Nvidias V.91.31. worked fine for a few startups then the found new hardware wizard came on with 640X480 60Hz resolution. rebooted and all was good. Then I tried the method in the windows drivers we recomend here thread removed all the nvidia drivers with Driver Cleaner, Disabled norton and installed Nvidia's V77.77 drivers. the problem came back again.

  • Reset NVIDIA GeForce 8600M GT graphics driver

    How can I reset my NVIDIA GeForce 8600M GT graphics driver in my MBP 2.2 GHz, 2 Gb RAM, Mac OS X 10.7.2?  When I start it up, white screen appears OK, but when the login window should appear, the screen goes black, and I need to connect my external monitor (Apple Cinema Display 23-inch DVI) to see the image.  When I finally log in, and I go to the System Preferences panel and try to detect my MBP display, it seems that it does not exist.
    I have tried everything: resetting PRAM, fixing permissions, etc, but nothing happens. I even formatted the HD, and tried to reinstall OS X Lion, and in this case, both monitors work as mirrors (weird, eh?).  As it did not work, I tried to install the original OSX that the installation disks have, but starting the installation process from the disk did not work, because the video is scrambled (weirder!). So it is not a hardware problem, and I think the NVIDIA drivers are corrupt, but I don't know how to fix this problem.  Can anybody help?  Thanks in advance

    Hi
    Are you getting the MacBook Pro repaired ?

  • Photoshop CC not detect nVidia GeForce GTX 680 after driver upgrade (Windows 8 64-bit)

    i just upgraded the driver for my nVidia GeForce 680 graphics card from the nVidia website. the specifications are shown below.  Photoshop CC now says that it can't detect my graphics card. does anyone know the solution to this problem?
    nVidia verstion 327.23 WHQL
    release date: Sept 9, 2013
    operating system: windows 8 64-bit
    will adobe have to issue an update to photoshop CC to fix the problem?

    hey chris,
    thx for relplying. i appreciat it. here is what happened. i did an update through microsoft and downloaded a driver for nVidia. somehow that download caused PS CC to stop recognizing my GTX 680. i'm not sure why. subsequent to that, i went to nVidia's website and downloaded the current driver. i still found that PS CC didn't "see" my graphics card. that is when i wrote this post. after i posted this i rebooted my computer and found that everything now works fine. PS CC now recognizes my GeForce GTX 680 with no problems.
    john

  • Graphic driver problems ?

    Hello to all you courageous out there. Ready to read this ?
    Here's my little story of my problem:
    One year ago I bought a superb macbook pro 15" (early 2008), unfortunately I quickly noticed some problem with the display.
    This is how what it looked like (activate the HQ mode to better see the problem):
    http://www.youtube.com/watch?v=s-0dCONX6FY
    http://www.youtube.com/watch?v=tsak8n_P6ZY
    Description : vertical objects are torn apart when panning horizontally
    The symptoms appears right after start up, even when the mac is not warmed up yet. It happens during internet navigation when scrolling horizontally, also during youtube videos (or flash files), and all application using accelerated hardware. Graphic performance is not affected, but the results is ugly and realism takes a hit.
    I have tried the following :
    Clean install of leopard
    Reset PRAM
    Apple hardware test
    Updated to 10.5.6
    The problem is missing on my iMac (ATI Radeon 2400HD) or on Windows PCs : the display is clean.
    I posted this issue in different forums and I received two interesting answers :
    - My problem could be linked to the famous problem of faulty nvidia chips (Geforce 8600m GT)
    - A developer of Aspyr told me that it could be a serious problem of vertical synchronization, probably du to not optimized drivers
    Indeed, it's look like a strong tearing effect. Normally, the "vsync" option in games solves these types of problems, but it consumes a lot of FPS and this option is not available on OS X, or doesn't works with most games (DOOM 3 engine, Quake IV, Colin Mcrae Rally, UT2004 etc...). To have small problem of synchronization with frames is normal, but in my case, the magnitude is abnormally high.
    I decided finally to go see a service center and presented my problem to a technician, who agreed to my problem. He thought that I had a faulty video memory and change the mother board. But the problem continued. He then changed the screen and the hard disk without success.
    The technician then contacted Apple, and sent them a video of the problem.
    After 4 weeks I'v got my mac back and was told that Apple will contact me directly and that the issue will be solved with a future update of OS X.
    Apple remained vague about the solution and didn't contact me directly. I'm for sure not the only one who has this issue but so far I have not read anything about it on the internet. In view of the hight cost of a macbook pro, I would expect a clean display.
    Any ideas ?

    Hi,
    Unfortunaly, Mac OS 10.5.7 update didn't solve the problem. I decided to install windows to see it's a driver problem.
    I have exactly the same problem on :
    - Windows Xp 32 bit
    - Windows Vista 64 bit
    - Windows 7 RC 64 bit
    It was tested with Apple nvidia drivers (BC 2.1) and nvidia updated drivers (from nvidia website).
    Here how it look likes (enable HQ !) :
    http://www.youtube.com/watch?v=qfVgcu3TMks (doom 3 demo under Mac or PC)
    http://www.youtube.com/watch?v=XmlKNg79nQM (Mac OS)
    I haven't this screen tearing on my windows PC or on my iMac (ATI).
    I'v tested the graphic memory of my 8600M GT and no errors were detected and the graphic card performance seems fine (7800 pts with 3Dmark benchmar 05).
    Same problem with an external screen.
    Is this normal ? if it's not the drivers, graphic card, or the screen, what can it be ?
    Best regards,

  • NX6600-VTD256 - Help

    Greetings,
    MSI K8N NEO4 Platinum
    AMD 64 3500+
    ProSource ATX P.S.
    +3.3V = 15.0A
    +5V =    40.0A
    +12V=   20.0A
    -5V=      0.6A
    -12V=    0.6A
    +5VSB=  2.0A
    2GB Ram - (4)x512 Super Talent
    MSI NX6600-VTD256
    (2) WD 250GB SATA Raid 0
    SB Audigy 2
    Klipsch Promedia Ultra 5.1
    Win XP Pro SP2
    I am having an issue with a cad program: Cabinet Vision Solid. It is a CAD/CAM software that links to my CNC machine.
    When I am in 2d mode, there are dimensions on a certain part, showing height and width, and a layout grid. The dimensions and grid are supposed to be visible no matter which way I view a component. The dimensions, and the grid disappear as soon as I switch views, or only partially show up.
    I have this software installed on several PC's without the same issue. I have even tried a different display, to no avail. Most of the other systems have only onboard video
    Any ideas would be greatly appreciated.

    i think this problem is on the program. try uninstalling it and reinstalling it over again. download the latest vga drivers as it always have fixes for some issues. if the problem persists, look in the programs manufacturers site and make sure your vga card is compatible to the program., 

  • Hard drive problem...... Please Help

    Hard drive problems
    I am sure it is due to my error or mistake but I received a new Maxtor III touch as a replacement for my failed drive yesterday after connecting it I went to Maxtor one touch manager software that came with it and the drive did not appear in the window so then I opened disk utilities and copied my notebook hard drive over to the Maxtor ran permissions on each drive and then closed down my system ! today when I opened my Powerbook with the Maxtor on it gave me the grey screen 2x so I disconnected the Maxtor ran permissions again and everything was fine until i power up the Maxtor and Grey screen again! Help How do I fix this?????

    Maxtor one touch III firewire 800 its connected to my Titanium G$ Powerbook I am beginning to think its just another drive failure

  • Computer is balky random freezes across apps. Two hard drive cleans later (their scan reveals no hard drive problems) photo shop won't work at all, magic touch mouse inoperable and their diagnoses is corrupted data? Anybody heard of this?

    Computer is balky random freezes across apps. Two hard drive cleans later (their scan reveals no hard drive problems) photo shop won't work at all, magic touch mouse inoperable and their diagnoses is corrupted data? Anybody heard of this?

    Well, yes, data does get corrupted sometimes.
    The trick is finding what data.
    By 'cleaned' are you therefor meaning that the drive has been erased and the system re-installed?
    Because that's the quickest way to deal with such a situation.
    Back up the system first of course,
    Add back 3rd party apps one at a time in case one of them is causing the problem.

  • Lenovo T400 screen goes dark issue, some video driver problem

    Lenovo:
    Motherboard:
    CPU Type: Mobile DualCore Intel Core 2 Duo P8600, 2400 MHz (9 x 267)
    Motherboard Chipset:  Intel Cantiga GM45
    System Memory: 1992 MB (DDR3 SDRAM)
    BIOS Type: Phoenix (08/19/08)
    Display:
    Video Adapter: Mobile Intel(R) 4 Series Express Chipset Family 
    Video Adapter: Mobile Intel(R) 4 Series Express Chipset Family 
    3D Accelerator: ATI Mobility Radeon HD 3470 
    Problem/Issue:
    Driver problem appeard after upgrading from XP to Windows 7.
    From the Device Manager I saw that ATI Mobility Radeon HD 3470 was not working properly and
    a) I did the "update driver software." After restart the screen light was darker than usual. (This was usual if I was working from battery but I was plugged in this time. ) 
    As I'm not the best with computers I thought my drivers might be in conflict and to prevent serious damages, I just
    b) disabled ATI Mobility Radeon HD 3470 from device manager. 
    This actually resolved the dark screen problem.
    c) then I went to Lenovo support site: http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-72858
    downloaded newest drivers for ATI Mobility Radeon HD 3400 (Switchable Graphics Driver)
    and Intel 4500MHD (Intel GM45 Express Chip)
    For some reason while installine the: Intel GM45 Display Driver (version 8.15.10.2302) gives me error:
    "This Computer Does not meet the minimum requirements for installing the software"
    Also some problem appeard when installing the new downloaded version:
    ThinkPad Switchable Graphics Driver  (version 8.792.5-110424b-119200C)
    d) so I went back to device manager and made an update to ATI Mobility Radeon  from there. 
    Well, I got it working, but the screen went dark again. When I disable the driver it goes back to normal
    brightness and when I enable it again, it stays normal.
    I'll try to restart and see what happens

    We had the excat same issue.
    I could get the picuture back pressing the power button until it went to sleep and then wake it up again.
    After the I went to device manager to delete all display drivers both Intel and ATI and then reboot.
    doing the reboot windows found some drivers it could use.
    I then installed the switchable driver from lenovo.
    Now windows device manger report two display drivers:
    1)
    ATI Mobility Radeon HD 3400 Series, Version 8.792.5.2000, Driver manufacturer ATI Technologies Inc
    2)
    Mobile Intel(R) 4 Series Express Chipset Family, Version, Version 8.792.5.2000, Driver manufacturer ATI Technologies Inc
    So it seams the switchable ATI driver take over the Intel card and the Intel driver is not needed.
    At least the problem is solved for us.
    Regards Anders

  • I was trying to sync my 120GB iPod Classic earlier and it said it couldn't sync as the iPod disk could not be "read" or "written to". I now can't get anything onto my iPod, and I was wondering if it is a hard drive problem? Any help appreciated. Thanks.

    I was trying to sync my 120GB iPod Classic earlier, and it said it couldn't sync as the iPod disk could not be "read" or "written to." I now can't get anything onto my iPod, and I was wondering if it is a hard drive problem? Any help appreciated. Thanks.

    Did you go into iTunes to change the location of your media files? if not you will need to go into iTunes and click on preference and select the advance tab then click the iTunes Media folder location.  Select the location of your on external hard drive. 

  • Windows 7 - HP Laserjet 8500 print driver problem

    I have tried everything imaginable to correct this HP 8500n print driver problem with no success, please help!
    I cannot correct or get rid of a reoccurring “Incompatible Print Settings” error dialog box message that repeatedly states that “There are one or more conflicting settings. One of the settings is: Output Bin: Mailbox 1, Accessory Output Bin: Not Installed”. The radio button options are “Restore my previous settings or Keep this setting, and I will change it later”. This same dialog message repeats 13 times for all the other various conflicts each time you click on printer properties to change to 2 sided printing or any other printer settings. This printer does not have any of these features attached or set into it.
    I am a volunteer that manages a number of computers on our small church LAN, 2 computers operating on MS XP-SP3, 2 on MS Windows 7 Home Premium and my 2 problem computers that came pre-installed with Vista Home Premium of which I have performed an HP OEM upgrade to Window 7.
    I have isolated this print driver problem to the Vista operating system and even when computers are upgraded to Windows 7 does not correct this driver error. I have also tried every possible print driver variant of the HP 8500, HP8550, PCL, PS to include the Microsoft versus HP versions with no success. In each case I get this error yet neither of the XP computers or the computers that had Windows 7 as a original operating system have no problems with their print drivers for this printer.
    Yes, I have repeatedly searched and upgraded the operating system and print drivers. In desperation I have even tried to find the correctly behaving Windows 7 print driver and transfer it to these Vista upgraded to Windows 7 machines. However I could not isolate the driver location.
    The only thing I can conclude is that this errant HP print driver was resident within Vista and remains resident even after a HP OEM Windows 7 upgrade. Additionally, all of these computers are configured to access this printer via its static IP address on the network.  The XP computers are 32 bit, all of the Vista upgraded to Win 7 and OEM Win 7 computers are 64 bit machines all with respective OS. 
    Can anyone please help me correct this problem?

    Hi, 
    Unfortunately I can't see your uploaded image yet as it is awaiting approval from HP.
    From what I can see you are correct that HP does supply drivers for this printer and that the drivers for your printer are already included with Windows 7.  On the machines affected, try the procedure below to see if it helps at all
    Next download revo uninstaller on the link below and install it.
    http://www.revouninstaller.com/download-freeware-version.php
    Disconnect the printer from the PC.
    Run Revo and see if it finds any  HP Printer Software installed.  If it does, right click the software icon and select uninstall.  During the process you may be asked to delete registry entries.  If you are, just select all and click delete.  Do the same for any left over files and folders.  Once completed, reboot the PC.
    Re-connect your printer to the PC and follow the guide below.
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02536257
    If this helps you will need to repeat the process on each of the affected machines.
    Best wishes,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • HP Color LaserJet 5550 and Tiger (10.4.11) Driver Problem

    I have recently acquired a Color LaserJet 5550hdn. I have updated all drivers and firmware available from the HP Website (Printer Driver, 5550 firmware and Jetdirect 610n firmware). The printer has been factory reset/cold reset etc. to purge any previous custom settings. I am using a PowerMac G4 Quicksilver (933mhz) and Mac OS X Tiger (10.4.11). I have made some test prints from both Preview and iPhoto and all have been dark and muddy with respect to colors. I have printed the same images from my wife's PC with HP's PCL 6 Driver for Windows XP and achieve satisfactory results with respect to color (that is to say, without fooling with any color settings in the driver, the image is at least within 10% of the color gamut compared to the screen image). Setting up the printer with the HP Postscript Driver for XP yields similar results as the Mac, dark and muddy colors. So is this a problem with the HP Postscript Driver? Is this a Mac OS X Tiger problem? Do users have color problems with the printer running the Leopard driver? 
    I previously owned a HP Color LaserJet 8550 (utilizing the same HP Driver for Mac OS X that the 5550 uses) and had default images (no fooling with any color settings in the driver) that were acceptable, again within 10% or less of the screen image color gamut.
    I have also downloaded HP's ICC color profiles (CMYK and sRGB) and put them in library/printers/hp/profiles.
    With respect to the driver itself, there are two areas in the print dialogue box which seem to have a bearing on color. One is Colorsync and the other is Color Options. Colorsync has two choices ('Standard' and 'In Printer') and I chose 'In Printer' to I assume bypass any Colorsync Conversion. When 'Standard' is chosen the print summary shows the HP Color LaserJet CMYK profile being used. There seems to be no way of changing the default setting in the Colorsync Utility to HP Color LaserJet sRGB. Not sure if it matters as the output for both 'Standard' and 'In Printer' seem to yield the same results. The options under 'Color Options" in the driver under the 'Show Advanced Options' have choices (Basic, Text, Graphics, Photographs, Advanced) and I have played with these to some extent. Although they seem to have some effect on the image, the print is still dark and muddy with respect to colors.
    On a final note I have tried a 'GutenPrint' driver to see if it would yield different results.....there was not one for the 5550 so I used a driver for the Color LaserJet 5500......it would only print in grayscale....the resulting image did not look very promising even if it had printed in color.
    Insights on any of the above from the community here would be most helpful!
    Thanks,
    -Ray 

    This is an update to my own post above. I downloaded the Mac OS 9 driver (yes OS 9!, but the QuickSilver is Dual Boot) for the Color LaerJet 5550 and printed (no changes to any of the driver settings) the same image (photo) as I used in Mac OS X. The image was still dark but not as poor from Mac OS X 10.4.11 (Tiger). Although I prefer not to use color management, I used the Colorsync tab in the driver and chose to match to Colorsync with a generic sRGB output profile (no other settings were changed in the HP color options tab). The resulting image was +/- 5% within the color gamut of the screen image (yeah!!!) In Tiger the options under the Colorsync tab in the driver are 'Standard' or 'In Device' and regardless of the choice, the print result is the same, very dark and muted colors. There is no option for sRGB and if set to 'Standard' the print summary always shows a CMYK profile being utilized. Given that the HP Color LaserJet 5550 is an sRGB printer as per HP, perhaps that is a problem? I would assume the 'In Device' option would bypass Colorsync (since there seems to be no other way to turn it off) and use sRGB, but that does not seem to make a difference in the image being printed.
    My good success with an OS 9 driver leads me to believe I have a driver problem in Tiger. However, I have no problems with other printers (HP All in One, DesignJet Color Plotter and wide format Epson inkjet....all of which are older) with respect to poor color output. Given this is a current model in the HP line-up and I believe in service during Mac OS X Tiger, it seems hard to fathom other users do/did not experience a problem.
    Again, do Leopard users have a problem with color issues on this printer with default driver settings? Does anyone have driver settings/other insights they could share with respect to Tiger to at least get the print image somewaht close to the screen image? As it stands now, regardless of settings, the printed image is dark with muted colors.
    Thnaks to anyone who can respond, even if it is to say they have no problems in Leopard/Snow Leopard as I am upgrading to a new Mac soon.
    -Ray

  • Canon iR 2530 driver problem

    Hello at all...
    we have bought a new printer Canon iR 2530 but our IT-man can't get it installed.
    We have a Windows Small Business Server 2011 Standard 64bit operating system.
    He has tested several drivers here:
    imageRUNNER 2530
    The printer can be seen in the network and you can install at client. If you give a print order to the printer, the client says ok too. In printer spool the order is seen but it doesn't print.
    Our IT-man says this is definitely a driver problem.
    Can anybody of you here help us, please...

    Maybe this thread will help:
    https://discussions.apple.com/message/23873672#23873672

Maybe you are looking for