[GeForce 6] removing msi driver completely

hi, guys i have a msi 6800gt agp, i've had for a while now almost 14months, my problem is that the msi drivers will not go away, ive uninstalled them couuntless time and installed the standard nvidia ones, but the MSi in dispplay properties will not go like MSI clock and MSI information. How do i remove these headaches form my system. thanks (i have tried driver cleaner pro)..

Quote from: mcmoe on 17-December-05, 08:36:13
hi, guys i have a msi 6800gt agp, i've had for a while now almost 14months, my problem is that the msi drivers will not go away, ive uninstalled them couuntless time and installed the standard nvidia ones, but the MSi in dispplay properties will not go like MSI clock and MSI information. How do i remove these headaches form my system. thanks (i have tried driver cleaner pro)..
How about a regcleaner. a.k.a Register cleaner.

Similar Messages

Black screen when MSI driver is installed (MSI R9 270X 2GB )

Bought new computer and everything worked fine until couple of days ago ..
can pull some info ..
Windows 7 Ultimate x64
AMD 8350FX 8-core
ASUS Sabertooth 990FX R2
MSI R9 270X 2GB GDDR5
8GB 1866MHz RAM
120gb SSD Kingston HyperX
Everything worked fine even with the drivers that are there now but one day the screen started to fluttering and act strangely then windows crashes. I rebooted then when I want to log in or when the login page will show I only got black screen...
Reboot again ... go into " safe mode " ... screen works with standard VGA ... uninstall the drivers for the MSI card ( msi.com ) ... restart ... everything works .
However, it goes on the standard VGA but as soon as I install the drivers, I get the same problem ....
What has happened?
Got NO clue right now .. drivers worked before , I haven't updated them since I installed them (3weeks ago) I have not done anything that I can think of ..
Are grateful for answers!

I have the same problem. Updated driver to 13.11 beta was running my MSI 2GB r9 270x for 3 days got it on the 24th and today after a system reboot the windows screen appears to load then goes to black. I started safe mode, uninstalled the ati graphics drivers, rebooted and windows booted fine. Reinstalled the lastest 13.12 driver and rebooted to the black screen again.
Specs:
Board: P7P55D Asus
PSU: Cooler Master Silent Pro M850 @ 850 W output SINGLE 12V channel at 66A
VCard: R9 270x MSI 2G
Proccessor: intel i5 750 @ 2.66 GHZ
Did not overclock the video card or touch the voltages, tried VBIOS updates to fixed the screen flicker and it worked find the flicker dissapeared after the this new black screen problem happened i reverted back to the stock VBIOS the card shipped with(saved it before i updated it) reverting to the stock VBIOS didnt fix the problem only removing the driver fixes the problem, any help would be greatly appreciated.
Thanks for your time,
Empirus

Not able to safely remove USB drive while Labview is open

To all the Gurus,
I am using LabView 8.5 and have made an Application which requires user to download data from USB drive/stick. So when VI runs user asked to select a .TXT file from USB to download. Here whole operation completes as desired. ONLY PROBLEM I am facing is when download completes User tries to "safely remove USB drive" where windows gives a warning saying USB is in use and cannot be removed.
In this particular VI I am using file dialog function to browse through USB and let user select a file. I even tried using open file function but it is giving same error.
The only way I can safely remove USB after downloading is by exiting Labview which is not feasible for my application.
is it a Bug in 8.5 or is there any different way to do it?
Any type of help will be appreciated.
Regards
Solved!
Go to Solution.

You can call the SetCurrentDirectory Windows API function (see attachment), but if you follow the link you'll see it warns about using it in multi-threaded apps. I have no experience with it, so I can't comment.
Try to take over the world!
Attachments:
Set Current Directory.vi ‏11 KB

[SOLVED] Remove hard drive

I set up Arch Linux with a hard drive /dev/sdc connected to the computer. I now want to remove this hard drive completely. However on boot (using Syslinux with no chain for this hard drive) the system stops at the start job for that device.
If I plug the hard drive back in (connect sata cable) all works well again.
Where do I remove the device so that the boot process does not expect it to be connected.
Thanks
Last edited by peterpeter (2013-08-25 12:46:58)

Hi Jrussell,
lblsk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 111.8G 0 disk
├─sda1 8:1 0 99.1G 0 part
└─sda2 8:2 0 12.7G 0 part /
sdb 8:16 0 37.3G 0 disk
└─sdb1 8:17 0 37.3G 0 part
sdc 8:32 0 55.9G 0 disk
├─sdc1 8:33 0 18.7G 0 part
├─sdc2 8:34 0 1K 0 part
└─sdc5 8:37 0 37.3G 0 part
sdd 8:48 0 465.8G 0 disk
├─sdd1 8:49 0 417G 0 part /mnt/Windata
└─sdd2 8:50 0 48.8G 0 part /home
sr0 11:0 1 1024M 0 rom
sdc is the drive I don't want
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
# /dev/sda2
UUID=6cc28dce-2d88-40da-b307-5573a0103aad / ext4 rw,relatime,data=ordered 0 1
# /dev/sdd2
UUID=e6c8090f-e7fe-43b9-aa7b-6fcc39764242 /home ext4 rw,relatime,data=ordered 0 2
10.1.1.3:/homes/peter /mnt/backup nfs rw,user,hard,intr 0 0
# Windata
/dev/sdd1 /mnt/Windata ntfs-3g defaults,rw 0 0
and syslinux
# Config file for Syslinux -
# /boot/syslinux/syslinux.cfg
# Comboot modules:
# * menu.c32 - provides a text menu
# * vesamenu.c32 - provides a graphical menu
# * chain.c32 - chainload MBRs, partition boot sectors, Windows bootloaders
# * hdt.c32 - hardware detection tool
# * reboot.c32 - reboots the system
# * poweroff.com - shutdown the system
# To Use: Copy the respective files from /usr/lib/syslinux to /boot/syslinux.
# If /usr and /boot are on the same file system, symlink the files instead
# of copying them.
# If you do not use a menu, a 'boot:' prompt will be shown and the system
# will boot automatically after 5 seconds.
# Please review the wiki: https://wiki.archlinux.org/index.php/Syslinux
# The wiki provides further configuration examples
DEFAULT arch
PROMPT 0 # Set to 1 if you always want to display the boot: prompt
TIMEOUT 50
# You can create syslinux keymaps with the keytab-lilo tool
#KBDMAP de.ktl
# Menu Configuration
# Either menu.c32 or vesamenu32.c32 must be copied to /boot/syslinux
UI menu.c32
#UI vesamenu.c32
# Refer to http://syslinux.zytor.com/wiki/index.php/Doc/menu
MENU TITLE Arch Linux
#MENU BACKGROUND splash.png
MENU COLOR border 30;44 #40ffffff #a0000000 std
MENU COLOR title 1;36;44 #9033ccff #a0000000 std
MENU COLOR sel 7;37;40 #e0ffffff #20ffffff all
MENU COLOR unsel 37;44 #50ffffff #a0000000 std
MENU COLOR help 37;40 #c0ffffff #a0000000 std
MENU COLOR timeout_msg 37;40 #80ffffff #00000000 std
MENU COLOR timeout 1;37;40 #c0ffffff #00000000 std
MENU COLOR msg07 37;40 #90ffffff #a0000000 std
MENU COLOR tabmsg 31;40 #30ffffff #00000000 std
# boot sections follow
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
LABEL arch
MENU LABEL Arch Linux
LINUX ../vmlinuz-linux
APPEND root=/dev/sda2 rw
INITRD ../initramfs-linux.img
LABEL archfallback
MENU LABEL Arch Linux Fallback
LINUX ../vmlinuz-linux
APPEND root=/dev/sda2 rw
INITRD ../initramfs-linux-fallback.img
LABEL windows
MENU LABEL Windows
COM32 chain.c32
APPEND hd0 1
LABEL hdt
MENU LABEL HDT (Hardware Detection Tool)
COM32 hdt.c32
LABEL reboot
MENU LABEL Reboot
COM32 reboot.c32
LABEL off
MENU LABEL Power Off
COMBOOT poweroff.com

MSI driver - new NVidia driver: MSI Info/Clock

Hi,
I first used the MSI driver for my new MSI NX6600GT-VTD128 AGP. I don't use any other MSI software.
I now uninstalled this old NVidia (MSI) driver and installed the new NVidia driver. The "MSI Information" and "MSI Clock" tab remain. Do they still work (D.O.T. , etc)?
Can these 2 tabs only be installed with the MSI driver on the CD that came with my card?
Thanks!

Quote from: MrBigA on 10-February-05, 23:31:35
k tabs are controlled by msicpl.dll and will not removed, you will manually have to eradicate the file yourself. It should be in the windows directory but if you cannot find it just do a search."
I now deleted the msicpl.dll from C:\WINDOWS but the tabs are still there.
There is one more msicpl.dll in C:\WINDOWS\SYSTEM32
Which one is the right one? Both? Or is one from Microsoft? Can I savely delete the one in \SYSTEM32 ? Should I restore the one in \WINDOWS?
Thanks!

Transfer application from removed hard drive

After replacing a failing hard drive; I need to transfer applications from removed hard drive to newly installed hard drive. What is needed to do so and what is the best method of tranferring applications? Thank you.

So the drive that was failing s still working enough to mount, that's good. Purchase an external enclosure or a dock to mount the OS drive on the desktop. In your Utilities folder open Migration Assistant and select to migrate your applications "from another disk". Follow the prompts and let it do it's thing. MS Office applications haven't worked for me after migrating but a simple reinstall of Office took care of that. While you're at it you can also migrate any documents, photos or music from the old drive before it completely dies.

How do I remove MSI Ti4200 drivers?

I have an MSI Ti4200 and Win98.
I installed the latest MSI video card drivers.
But now I want to remove them and install the Nvidia ones.
No matter what I do, I can't seem to remove the MSI drivers completely.
What's the uninstall procedure?
Thanks,
MrMatt

MrMatt,
After you uninstall the MSI drivers, do a search for msicpl.dll and delete it. You will find it in your Windows directory. That will get rid of the MSI tabs.
Take Care,
Richard

Where can I download the iTunes64.msi driver. I can't update my current Itunes without this driver.

Where can I download the iTunes64.msi driver. I can't update my current Itunes without this driver. I can't find it on Microsoft's website or Apple's website.

You can't download the individual .msi files, but they can be extracted from the setup.exe files if required.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you are running 64-bit Windows and the above steps haven't helped try installing the version of iTunes that can be downloaded from this support document. iTunes 12.1 for Windows (64-bit — for older video cards)
tt2

Removing mouse driver from system preferences, other...how?

In system preferences, other, how do you uninstall items? I have read in this forum that if you right click and choose "remove (xxx) preference pane" it will uninstall it. If remove doesn't uninstall it, exactly what does it do?
Is it that simple? I am trying to remove a mouse driver.
thanks
bob

I'm afraid I don't follow you. Each component can be individually deleted. But as I said removing the preference pane (in any way) will not remove a driver located in the Extensions folder (if there's a driver involved.) Likewise removing a driver will not remove a preference pane. This is why you should use the uninstaller that comes with the software you are using (which you haven't mentioned.)
For general help with uninstalling software see:
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, Easy Find, instead. Download Easy Find at VersionTracker or MacUpdate.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are also several shareware utilities that can uninstall applications:
AppZapper
CleanApp
Yank
SuperPop
Uninstaller
Spring Cleaning
Look for them at VersionTracker or MacUpdate.
For more information visit The XLab FAQs and read the FAQ on removing software.

Reset NVIDIA GeForce 8600M GT graphics driver

How can I reset my NVIDIA GeForce 8600M GT graphics driver in my MBP 2.2 GHz, 2 Gb RAM, Mac OS X 10.7.2? When I start it up, white screen appears OK, but when the login window should appear, the screen goes black, and I need to connect my external monitor (Apple Cinema Display 23-inch DVI) to see the image. When I finally log in, and I go to the System Preferences panel and try to detect my MBP display, it seems that it does not exist.
I have tried everything: resetting PRAM, fixing permissions, etc, but nothing happens. I even formatted the HD, and tried to reinstall OS X Lion, and in this case, both monitors work as mirrors (weird, eh?). As it did not work, I tried to install the original OSX that the installation disks have, but starting the installation process from the disk did not work, because the video is scrambled (weirder!). So it is not a hardware problem, and I think the NVIDIA drivers are corrupt, but I don't know how to fix this problem. Can anybody help? Thanks in advance

Hi
Are you getting the MacBook Pro repaired ?

Multiple itunes libraries on same computer and removable hard drives

I have multiple itunes libraries, one resides on my internal hard drive on my computer and the other on a removable hard drive that I pug into the ocmputer via a USB cable, can itunes recognize both libraries at once, and how do I get it to do that?

That *****, apple should add a feature that allows multiple libraries.....hopefully they will in thenext release of iTunes.

Ipod has been reformatted and now shows up as a removable disk drive any he

I-pod has been reformatted and now shows up in windows as a removable disk drive can not get updater to recognize. any help?

Wow...I never thought there would ever be such a screwy problem like this on such a large scale....has anyone noticed how many similar posts have been posted in the last week or so? Not saying this never happens to anyone--in fact, it's happened to me beofre, but it was simple to fix...but the same problem happening with so many people at about the same time*...I don't know, it's kind of strange...anyway....
Yeah, I'm a Mac/Apple guy to the core, and have been since 7th grade (about 11-12 years now). Yet, I can't help but look at my iPod as if it has self-destructed. I was listening to it (w/ tape adapter, of course) on the way home in the car, then unplugged it for literally five minutes, got into my apartment, plugged it in my dell Latitude, and poof it had been reformatted. So, the moment I plugged it in, its funcionality basically vanished. The 5 R's have been useless thus far, and I can't even reformat using Explorer, because Windows tells me that the 1 GB iPod now has no storage capacity. ***? Strange, strange. Anyhow, sorry for the rambling, but this really confounds and frustrates me. APPLE....HELP US PLEASE!
*Don't get me wrong: I'm not a conspiracy nut; it's just hard to wrap my mind around this right now.

IPod Touch Doesn't Show Up In My Computer Removable Hard Drive

So, unlike my 1st Gen Nano, my IPT doesn't show up as a removable hard drive. How do I fix that?

Sure you can, a portable device for music, videos, podcasts, etc.
Sorry, no you cannot use it like some of the previous iPods have been able to be recognized as mass storage devices.

Windows 8.1 will not recognise my buffalo removable hard drive

the hard drive worked until I had my laptop camera fixed & they have removed the driver & now it wont recognise it at all

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how your desktop computer will not activate after performing a system refresh, and I would be happy to assist you in this matter! In order to correct this issue, I suggest following the steps in this resource on Windows 8 product activation, which should help to activate Windows 8.1 on your system. Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards

Moving Photos on removable hard drive

If I have my photos on a removable hard drive and must re-install PE-8. Will my catalog including tags still be intact?

Glad you had success. You can check to see how many preview files have been built by checking the Lightroom 5 Catalog Previews.lrdata folder with File Explorer:
/Users/[user name]/Pictures/Lightroom/Lightroom 5 Catalog Previews.lrdata
Right-click on the folder and select 'Properties.' Next to 'Contains' will be the file count representing the number of built previews. It should be the same as the number of pictures (100,000) or slightly more.
Creating previews for 100,000 image files will take a long time! My Windows 7 i7-860 processor system with 21 mp Canon 5D MKII raw files takes about 3 seconds to build one standard preview. Using this number for 100,000 previews:
100,000 x 3 seconds = 300,000 sec. = 5,000 min. = 83 hours = 3.5 days!

[GeForce 6] removing msi driver completely

Similar Messages

Maybe you are looking for