Geforce 750ti not working with HP P7-1240, please help!!!

I just got a EFGA Geforce 750Ti to replace the XFX Radeon HD5670 that I had in my HP p7-1240 (Got it in 2012, AMD A10 3.4ghz quad core, 10gb ram, HD 7660 graphics, system bios 7.07, updated to windows 8.1, etc)
I have been building computers for 20 years and this process is not foreign to me. I uninstalled the XFX drivers, put in the Geforce and it should of worked, but alas it did not. Instead it beeped, went to the HP blue load screen, stays there beeps and after a minute or two goes black. I have read all of the threads related to this issue and haven't found a conclusive answer.
This card is supposed to work fine with my computer's 300w PSU. Some people reported that other models of HP desktops needed a bios update, but HP doesn't seem to have one for my specific model. My motherboard is PCI-16 2.0 and that should also be fine...
I would love to actually get this thing working rather than returning it and going without...I would also love for someone at HP to comment on how to specifically remedy this.

Nope, it is not compatible with your PC. The 700 series card ship out with full UEFI vBIOS support, which the version 7 BIOS doesn't support. For some reason HP will not release the version 8 BIOS for these not-so-old PCs.
I would suggest buying the 600 series instead. They are almost the same as the 700s, however they do not ship with UEFI support, so it will work for you.
Also, that 300w PSU is not a good idea to keep using. If you were going to use that 750 Ti, you would have needed a minimum of 600w. You'll need about a 500w PSU for the 600 cards.

Similar Messages

Media Manager not working with new Verizon Curve, Please Help...

Close to returning my new Curve. The Roxio Media Manager will not recognize my Curve at all. I have tried everything, read every post and still nothing. Using version 4.3 of Desktop Manager with Vista Home Premium. Someone please help...
Thanks for any help

Same issue here. Contacted Verizon tech support, they had me reinstall media manager -- which did nothing. They had me try disabling mass media support and the media card support. Neither which worked. After 90minutes on the phone, the tech was contacting their "advanced support department" to get more info. I got fed up and hung up. Maybe they will call me back -- who knows.
The tech said that they might have to contact RIM to get it fixed. I am thinking verizon inadvertantly blocked media transferring -- like they do on all of their other phones. However, VCAST is not available on Blackberry phones for Verizon, so it is a stupid idea if they did it.

WRT600N not working with Mac OS X - Please help

I previously had a WRT54G and it was working fine (until it died) with my MacBook Pro laptop. I just replaced it with a WRT600N and the MacBook Pro is no longer seeing either of the two wireless networks being transmitted by that new router. However, when I boot the MacBook Pro in Windows Vista through BootCamp it sees the networks with no problem. Is the WRT600N incompatible with Mac OS? If so, is there or will there be a patch soon (and where can I find it)? I also have a WRT300N running and it is being seen just fine by both the Mac and WIndows sides of the MacBook Pro. The problem is only with the WRT600N and the Mac OS. Any ideas or suggestions would be appreciated.
Thanks.

Try using WPA2 Personal - AES encryption, that is the only config that worked with my older WRTG54? router and a new macbook.

HT1695 Wi-Fi to your iPhone does not work with the knowledge that I have worked Restart for the same purpose network does not work What is the solution please help as soon as

Wi-Fi to your iPhone does not work with the knowledge that I have worked Restart for the same purpose network does not work What is the solution please help as soon as

Okay, the Wi-Fi doesn't work. Turn it on.
Beyond that, we cannot offer any other assistance as you've failed to provide useful details of the problem.
When responding, post in your native language as your English makes very little sense.

The camera doesn't work on my iPhone 5s. It doesn't even work with camera apps. Please help!

The camera doesn't work on my iPhone 5s. It doesn't even work with camera apps. Please help!

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414

Apple 23 Cinema not working with nvidia 5200...help!!!

Hey all!
I have an Apple 23" Cinema that is not working with my Windows XP machine using an NVIDIA 5200 128meg graphics card. The montior, when booting Windows, just flashes its power light 3 times...goes off...then repeats the sequence.
So, I tried a Dell 2007WFP with the XP machine using the DVI port of the card. When booting, it seems like it's going to fire up the monitor (shows splash screen and Windows logo) but then goes blank when it hits the desktop.
Oddly enough, when I plug in my Apple 30" into the DVI port of the NVIDIA card, it works just great. No fuss or muss (other than a resolution change).
The 23" also works fine with my MacPro BTW so I know the monitor is golden.
Any takers on this one?
Thanks in advance!

Hi Talon, I just accidentally came across your thread. Maybe I can help. I own a 23-inch cinema HD display but mine is ADC and I have to run mine through an ADC to DVI adapter.
Anyways on to the discussion...
The nvidia 5200 is a rather old-ish card (or chipset). The feature set in these older cards are not necessarily symmetrically reciprocal (what?) throughout the feature set. In other words, the feature may work in one mode and not in the another mode...etc...
You may have seen these specs on your 5200 card/chipset:
+Dual RAMDACs (up to 400 MHz) for display resolutions up to and including 2048×1536 @ 85Hz+
and thought this would be great, my resolution is less than that @ 1920x1200 on my 23-inch cinema display. However I believe this may be referring only to the vga output signal and not the DVI. Read on...
Further down in the specs for the 5200 card/chipset you'll see:
+DVI support for compatibility with nextgeneration flat panel displays with resolutions up to and including 1600×1200+
Unfortunately, this is not enough resolution to power your 23-inch display at 1920x1200. Windows may even show the resolution 1920x1200 as available (if you're able to get to the screen) but what I think it's not telling you, it that in order for you to be able to use that resolution you'll need to switch to dual mode DVI, and the card does this automatically.
For example: 640x800 to 1600x1200 uses single mode DVI and anything above that (like our 23-inch cinema HD monitors @ 1920x1200) +using this particular card/chipset+ will be using dual mode DVI whether the monitor can support that mode or not. From my experience with my HD cinema it uses single mode DVI.
As someone said above your 23-inch is in *single mode DVI* and from my experience only accepts *single mode DVI input* from the graphics card.
From my understanding of the specs and your description of the delimma, I would suppose that you are able to get the 30 inch display to work because the 30 inch is a *dual mode DVI monitor* and your graphics card does work in dual DVI mode up to your 30-inch resolution but ONLY in dual DVI mode.
Here are the specs on it:
http://www.nvidia.com/page/pg_20040109440047.html
I hope this helps you out.
If you were to ask my recommendation, I'd go buy a new video card that has higher resolution on the single mode DVI output. I can tell you that my ATI 2600 HD Pro (AGP) (windows version, not mac only) has two DVI ports that are both dual mode DVI capable but also dumb down to single mode DVI signaling at high enough resolution to support our 23-inch cinema HD single mode DVI displays.
Good luck!
Dibit

Internet Not Working on 3rd Party Network (Please help!!!)

Hey guys,
Cool forum. Hopefully cool enough to solve this weird problem.
I own a BlackBerry Tour and live in Sweden part of the year. Since I put the 3rd party SIM in my phone and activated the account, I cannot get internet to work. I can use BIS services etc., but browsing the internet does not work....when I try it says "Could not connect tog the internet, please try again".
The weird thing is that sometimes I can browse google etc. through the BlackBerry Help! app...but other apps don't work. I'm thinking maybe it has to do with APN settings?
PLEASE HELP!!!!
Mitchell
Ps! BTW, I have tried all the usuals....resetting, pulling battery, resending service books, host routing tables...the problem is with WAP, not BIS.

Hi !
Don't panic yet
I think you didn't select the Flash with SFCommand in the HTML tab inside the Template dropdown menu, that's the reason your Actions Scripts doesn't work in the html view.
To access hold down CTRL+SHIFT+F12--->HTML tab--->The first dropdown menu at the top
Hope this solve your problem.

Huawei e3276 does not work on OSX 10.10 please help

After I installed Yosemite Huawei e3276 does not work on OSX 10.10, please advise any work around for this issue - Thank you

Found a very easy solution online. Just download the software here and install. works immediately.
http://translate.google.com/translate?hl=en&sl=sv&u=http://www.tre.se/privat/kun dservice/teknisk-support/Mobilt-bredband/Uppgradering-modemrouter/Yosemite/&prev =search

HP laserJet P1006 not working on Windows 10. Please help

HP laserJet P1006 not working on Windows 10. Please help

Hi,
Try installing the windows 8.1 drivers from HP's support site, those are more likely to work.
For any issues clarify your OS version, is it 32 or 64 bit?

ASUS GEFORCE GT640 not working with the latest M92p 2992-B3G BIOS

I've got a ThinkCentre M92p (2992B3G) that I bought over 6 months ago.
It's a pretty standard setup, and I haven't done anything to the hardware except upgrading it to 8GB of memory and adding a new SSD for my system drive. In addition I purchased an ASUS NVIDIA GT640 PCI-e video card as the default video card doesn't put out much performance for even the most casual of gamers. I'm running on Windows 8.1, with all updates installed. I've always been very tidy, so I've kept myself up-to-date with all the latest Windows Updates, and updates from the Lenovo System Update tool.
This setup worked great for several months, until one dreadful night where a new BIOS was presented by Lenovo System Update. I can't for the life of me remember the exact version number of that BIOS, but I do know it was released a week or two before the 14th February 2012. The change logs for Lenovo's BIOS updates doesn't include a release date, but I g
Either way; I download the BIOS update for Lenovo's websites, burned myself the ISO-image version, and went ahead with the flash as I've done many times before, even on this computer.
This is were my issues began; after the BIOS update I cannot for the life of me get any PCI-e video cards to work. Once the computer booted back up, the display was simply blank; not even a POST-message, and much less any display from the operating system itself.
With the PCI-e video card installed I can't the BIOS settings either. Therefore I have to remove the video card, make the necessary BIOS setting changes, and insert the video card again before booting.
Bottom line; my GEFORCE GT640 worked fine until the BIOS update, after which it doesn't work anymore.
Here's a few things I've tried so far;
I've tried both my GEFORCE GT640 and my RADEON HD640. No luck with either.
I've tried my GEFORCE GT640 in another rig. Runs just fine, so the video card isn't faulty.
I've tried my RADEON HD7750 in another rig. Runs just fine, so the video card isn't faulty.
I've tried four different monitors (two from BENQ, one from ASUS and one from DELL). It's not a monitor issue.
I've tried different video card settings in the BIOS (AUTO, PEG etc). No luck.
It's not a driver issue. I've tried booting both Windows 7 and Windows 8, and in both cases I've tried it with a variety of drivers installed (and not installed). Tried drivers both from Lenovo and NVIDIA's official driver packages. It's not a driver issue.
I've tried 3 different DVI-cables, a VGA cable and an HDMI cable. All work on other rigs, but not with the PCI-e card in the M92p.
Yes, I do upgrade my BIOS from a bootable CD, and no, I didn't brick the motherboard
The funny part to this story is .. when I contacted Lenovo Support, believing that my motherboard was fried.
They asked me to contact InfoCare, one of their sub-contractors, to help me replace the motherboard. On the 13th of February 2012 an on-site support technician from InfoCare came to replace the motherboard. After he replaced it, we tried it out my GEFORCE GT640 to see if the problem had been resolved; EUREKA! IT WORKED!.
However, the support technician insisted to update the BIOS before he left. At the time I didn't know the BIOS was the real issue, so i stupidly agreed. He did his job, and left. I didn't reboot the computer again before I brought it home that day; and what do you know? I got home, booted up the computer, and got the exact same problem I had earlier; black screen, as if the PCI-e video card wasn't even there.
That gave me the idea that the BIOS was to blame, so I began searching around on Google, Lenovo's Community Forum and so forth. That's when I found out that Lenovo had a reputation for white-listing certain WiFi extension cards, video cards and so forth. The only speculation as to why they did this was users saying that it was because only certain combinations of e.g. a motherboard and video card was not FCC-compliant.
What sucks with this is that it wasn't always this way; in the case of the M92p 2992-B3G that white-list was added with a BIOS update.
So why don't you just flash back to an older BIOS version?
Easier said than done; there is no earlier BIOS version.
Well, there are earlier versions, but they're no longer available to the public. I've dug around pretty much everywhere, and there's no downloads available anywhere, only the latest BIOS versions are available for download.
So unless you've got an old ISO-image lying around, or happen to have the .img files in your C:\SWTOOLS, then you're pretty much screwed.
Anyone got any ideas on how I can go further from here?
The only suggestion I've got so far is to replaced the motherboard with a new one, which likely has the factory BIOS. That's pretty much what I did when the on-site support technician helped me last, and that worked like a charm until he flashed the BIOS again.
Here's a few relevant posts you might want to review if you're up for it;
MP92p (2992-B3G) - Problems with GeForce GT640 after 24th January BIOS Update
Doesn't PCI-e video cards work anymore with the M92p?
No video during boot after video card upgrade
For the curious ones you'll find the BIOS change logs (up to 9SJ979USA) here;
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkcentre_bios/9sj979usa.txt
UPDATE #1
If found an interesting reply to this post, where a user posted a link to a graphics card compatability matrix from July 2010, telling a M58p user that one of the video cards he wanted to purchase was not compatible with his machine type.
He also speculates that Lenovo only white-lists low-power graphics cards such as the Quadro NVS because of their low power consumption. Then again, he himself uses a card that's not on that compatability list (a GEFORCE 310) without any issues.
Is there an updated compatability matrix available, that also includes the M92p?
UPDATE #2
Could this problem been a result of LENOVO adding UEFI support to its M92p BIOS to comply with Microsoft's requirements for Windows 8?
If you check the specifications for the ASUS GEFORCE GT640, and scroll to the bottom of the page you'll see the following;
"* No native UEFI BIOS support, for UEFI BIOS, please download from ASUS technique support site. (The update tool only for ASUS MB.)"
Could this be the o'holy grail for my problem?
If this is the case, I am willing to purchase a new video card with native UEFI support (e.g. the SAPPHIRE RADEON R9 280), and see if that one might work.
Solved!
Go to Solution.

I can't seem to edit this post anymore, for some odd reason.
So here goes;
I found this post in NVIDIA's knowledge base;
When installing an after-market graphics card into a certified Windows 8 PC with UEFI enabled, the s...
The interesting parts in this post are as follows;
When an after-market graphics card is installed into a motherboard with UEFI enabled in the system BIOS, or if the system is a certified Windows 8 PC with Secure Boot enabled, the system may not boot.
UEFI is a new system BIOS feature that is provided on most new motherboards. A UEFI system BIOS is required in order for the Windows 8 Secure Boot feature to work. Secure boot is enabled by default on certified Windows 8 PCs.
In order to get the PC to boot with a graphics card that does not contain UEFI firmware, the end-user must first disable the secure boot feature in the system's SBIOS before installing the graphics card.
Note: Some system SBIOS's incorporate a feature called compatibility boot. These systems will detect a non-UEFI-enabled firmware VBIOS and allow the user to disable secure boot and then proceed with a compatibility boot. If the system contains a system SBIOS the supports compatibility boot, the user will need to disable secure boot when asked during boot process
This leads me to believe that the BIOS update that wrecked my setup was 9SKT58A/9SJT58A, which only contains one change;
"Adds support for updating BIOS from a WIN7 BIOS to a WIN8 BIOS".
I've just ordered a cheap UEFI-compatible GT640 from Gainward, so I hope I'll be able to try that out this weekend.

Nvidia GeForce FX Go5200 drivers not working with my New HD display HELP

Are there any updates for the nvidia GeForce FX Go5200 or generic drivers so i can use my brand new, beautiful, Samsung 226bw HD Lcd??
please help me.. i've searched the internet high and low for support, even called apple care, and i can't find help anywhere..
please help!!
does anyone know how to modify drivers? many pc users have been able to do it, but i don't know anything about code so please help me
I love my powerbook and don't want to replace it, but this new display may make me do that, i need the 22"'s for designing work and don't want to go back to my 17" display.

I'm having the same exact problem, only I've got the Samsung 225BW. I've spent all day on the phone with Samsung tech support to no avail, and could not reach anyone at Nvidia. Tried all the usual steps to adjust the resolution, but it will NOT reset, neither manually nor automatically, to the "optimum mode" of 1680x1050.
Have you had any luck yet? I've only had my display for a few days, and it will work on 1600x1024 and below, nothing higher.
There is no option in the menu for the 1680x1050! Making me crazy, because somehow it auto-set to the 1680x1050 when I first plugged it into my Powerbook G4, but now will not revert back to that.
Also, I searched for the driver downloads, and the only ones I found were for Windows.

My Iphone 5 has gone blank, I can not see anything. Restore with itunes has not worked either. Can someone please help?

Hi I recently upgraed to iOS 6.1 on my Iphone 5. After the upgrade, it was all good. Over the weekend I went Austria for Ski. While taking the photos, I simply locked the phone and kept it my pocket as I had to go. After sometime when I opened my phone, I could hardly see anything. I tried to unlock with pin and tried restarting with great difficulty. But nothing worked. Coming back home today, I have tried restore the software and still no luck. I have tried restore almost 5 to 6 times, but the screen is still blank. I dont know if what state it is in and I can not do anything to fix it. I am very annoyed with the support service as they can not be reached on Sunday evening.
I could manage to book a call tomorrow but I have lot of work over next few days at work. Can someone please help how to fix this issue now? Any suggestions will be much apperciated.
Thanks,
Srini

srinifromlondon wrote:
... Any suggestions will be much apperciated...
Try this Discussion
https://discussions.apple.com/message/19521062

Reason rewire not working with Logic 9.1.8,Help!

I need help on Rewiring Reason 6.5.3 with Logic 9.1.8
I've done everything that's been told how to rewire Reason and Logic (tutorials on youtube / on the Propellerhead website) I had no problem with it before 6.5 / 6.5.1
But after I updated to 6.5.3.I just cant get rewire working. When I click Reason after I open Logic. The Logic library is empty. I do have automap 4 as well. I'm not sure if that's the problem.
I even checked Reason's Option>Sync. Rewire is not able to be selected and the rewire light on the hardware interface is never on.
I've tried uninstall reinstall from 6.5 ,but still not working.....
Can someone help.....This is suppose to be easy.....Thanks!
2 x 3.2 GHz Quad-Core Intel Xeon 8 GB 800 MHzDDR2 FB-DIMM

http://documentation.apple.com/en/logicpro/usermanual/index.html#chapter=10%26se ction=11%26tasks=true
See if the above link helps

Vista Ultimate, Firefox 4.01 just installed. The back and forward buttons do not work with this new installation. Help please.

O?S is Vista Ultimate 32 bit fully updated. I have just installed Firefox 4.01. I have lost use of back and forward buttons - they are greyed out. Is there a solution please?

It is possible to have earlier data in a tab if the latest tab had target="_top" that means the back key will not work, but if your right-click on the back/forward you see a context menu. As far as I know the only difference between 3.6 and 4.0 ws that the drop-down arrow was dropped but like before you can still right-click.
There are some extensions that mess with the Back/Forward buttons.
There is a difference between gray and '''black''' on the buttons, '''black''' means there is history in that direction.
You can make Firefox 4.0.1 and Firefox 5.0 look like Firefox 3.6.17, see numbered items 1-10 in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 look like 3.6)]

My email is not working with os x lion - pls help

My email has stopped working since I upgraded to OS X Lion. Any ideas on what I can do to get it working again?

I am having exactly the same problem - and have noticed that several others are retporting similar problems in other forums. Unfortunately, there still appears to be no solution.
Since I loaded Lion, when I open Mail I simply get a toolbar but no message window. When I select CMD + 0 I get a blank window with with "no mailbox selected" on the top of it. Mail preferences does not work neither do most of the other view options. Curiously, it does seem to allow me to create and send a new mail message... although I cannot see anything once it has gone.
This is desperately important for me. My business depends on email correspondence.
Come on Apple... this software should have been stress-tested to prevent this kind of thing from happening!
(Machine: MacBook Pro i5, RAM: 8GB)

Geforce 750ti not working with HP P7-1240, please help!!!

Similar Messages

Maybe you are looking for