Geforce 7800 gtx power plug?

im getting a geforce 7800 gtx and it comes with i guess its a power cord where do i plug it into my late 05 dual core 2.0 g5? i know the card goes into the pcie slot but what about the little cord so it gets it power?
thanks
roger

Hi-
Welcome to Discussions!
In the Late 2005 models, there is a 6 pin power connection for graphics card power. The connector is located along the top edge of the logic board, above the RAM slots, Shown Here.
The cable needed is like these:
http://shop.ebay.com/i.html?kw=G5&_kw=card&_kw=power&kw=cable

Similar Messages

  • GeForce 7800 GTX... the best card for a PCIe G5 Power Mac?

    I have started out on the rocky road to upgrade the graphics card on my Power Mac G5 Quad 2.5GHz running Mac OS X 10.5.8. The standard card, a GeForce 6600, does not do justice to this wonderful computer, and struggles with any serious video work.
    The first step is easy – deciding on the best card. A little Googling shows that the GeForce 7800 GTX wins hands down over the competition.
    The next needs patience – these cards appear from time to time on eBay; I will need a 512 MB PCI-e version (not 256 MB) as I am running 10.5.
    I've waited a month or two, put in a winning bid and the card has arrived. Now all I need is the code to flash the ROM to make it work in myG5. Not so fast! I'll need a 128kb ROM chip! The idea of using a soldering iron terrifies me, so I'll have to find someone, who does this sort of thing for a living, to remove the 64kb ROM from my 7800 GTX and solder on a 128kb ROM.
    But what's is the right spec/manufacturer/supplier for the 128 kb ROM?
    If I am lucky my friend with the soldering iron may know. If not, I'm stuck. I've not been able to find this information anywhere on the Internet.
    Now all I need is the right code for the ROM. It seems that there are two versions that people have used: one, which seems quite common, is lightly edited Quadro FX 4500 ROM code which does not use the full power of the 7800 GTX, which after flashing reports itself as a FX 4500; the other, which seems to be as rare as gold dust, has been fine-tuned to use the 7800 GTXs full potential. Cards flashed with this version report correctly as 7800 GTX. I really want this optimised code, but neither version is available from any of the usual places.
    Can anyone please help?

    I've waited a month or two, put in a winning bid and the card has arrived. Now all I need is the code to flash the ROM to make it work in my G5. Not so fast! I'll need a 128kb ROM chip! The idea of using a soldering iron terrifies me, so I'll have to find someone, who does this sort of thing for a living, to remove the 64kb ROM from my 7800 GTX and solder on a 128kb ROM.
    Many thanks to japamac, who kindly sent me an e-mail which put me on the right track re finding the ROM code, editing it and flashing.
    I also now know that I no longer have to worry about soldering ROM chips. Yippee! The 7800 GTX code has been 'shrunk' to fit on a 64kb ROM.

  • 2 MSI Geforce 7800 GTX Duds?!?!

    I just bought two MSI Geforce 7800 GTX's and both seem to be faulty.
    I've tried them in single mode, SLI mode, and on multiple computers
    Both computers are MSI K8N Neo4 Platinum / SLI
    2 GB Corsair RAM at 3 3 3 8 1T
    One is an AMD Athlon 60 3000+
    The other is AMD Athlong 64 FX-55
    Both cards freeze on starting up windows right before the Windows XP PRofessional Loading screen. This occurs in SLI and in non-SLI mode running one card, as well as running on two diferent motherboards
    Not only does it freeze when starting up windows but when trying to do a windows install as well freezes on the "starting up windows" portion when i tried to reformat
    I have tried updating the BIOS for the MSI boards, it did nothing.
    This was an upgrade from two MSI 6800 GT's
    Should I return the pieces to the retailer?
    Thanks =/
    -Geilt

    Powersupply is 550 watt Antec Truepower II (TPII-550)
    # 2 low noise fans
    # Dual 12V outputs, for stability and safety
    # True Spec noise level of 21.3 dBA measured at an independent lab using ISO 7779 standard
    # EPS12V compliant/ATX12V 2.01 compatible. 24-pin main power connector with detachable 4-pin section for universal motherboard compatibility
    # 4 Serial ATA connectors
    # PCI Express graphic card power connectors
    # Dedicated output for more stability and less ripple noise
    # Feedback circuits for tighter load regulation (±3%) to maintain accurate voltage to all components
    # Industrial-grade protection circuitry prevents damage resulting from short circuits, power overloads, excessive current, excessive voltage , excessive temperatures
    # Fan Only power connectors allow True Power to control case fan speeds, reducing total system noise
    # MTBF: 80,000 hours
    # Safety approval: CB, DEMKO, FCC Class B, FIMKO, EMKO, UL, VDE, TUV
    # Gold plated connectors for superior conductivity
    # Important Note: The TruePower 2.0 Fan Only connectors are designed to power standard fans only. Attaching thermally-controlled fans to these connectors will likely result in unpredictable and undesired behavior. Thermally-controlled fans should only be connected to the standard 4-pin Peripheral Power Connectors. Please do not connect more than three fans to the Fan Only connectors.
    FEATURES
    Maximum Power    550 Watts
    Switches    ATX Logic on-off
    additional power rocker switch
    115/230 Volt selector switch
    Special Connectors    ATX12V 4pin/8pin
    3-pin Fan Sensor
    Fan Only
    SATA
    Transient Response    +5V,+12V and 3.3V outputs return to within 3% in less than 1ms for 20% load change.
    P. G. Signal    100-500ms
    Over Voltage Protection
    recycle AC to reset    +5V trip point < +6.5V
    +3.3V trip point < +4.1V
    +12V trip point < +14.4V
    Leakage Current    < 3.5mA @ 115VAC
    DIMENSIONS
    Unit Size    5.9"(L) x 5.5"(W) x 3.4"(H)
    15cm(L) x 14 cm(W) x 8.6 cm(H)
    Net Weight    5lbs.; 2.3kg
    INPUT
    Input Voltage    115 VAC / 230VAC
    Input Frequency Range    47Hz to 63Hz
    Input Surge Current    < 60A @ 115VAC
    Input Current    12.0A for 115VAC
    6 .0A for 230VAC
    Hold-up Time    > 17ms at Full Load
    Efficiency    > 70%
    EMI/RFI    FCC Class B
    CISPR22 Class
    OUTPUT
         +3.3V    +5V    +12V1    +12V2    +5V SB    -12V
    Max. Load    32.0A*    40A*    19A*    19A    2.0A    1.0A
    Min. Load    0.5A    0.5A    0.4A    0.4A    0A    0A
    Load Reg.    ±3%    ±3%    ±3%    ±3%    ±5%    ±5%
    Ripple V(p-p)    50mV    50mV    120mV    120mV    50mV    120mV
    * +5V, +3.3V, +12V1, 12V2 maximum output 530 Watts max.
    ENVIRONMENTAL
    Operating Temp.    0 to 50ºC
    Operating Alt.    Sea Level 10,000 ft.
    Non-Operating Vibration    Operating: 10-300 Hz, 0.5G, 3 axes, 1 hr. ea. axis
    Non-operating: 10-300 Hz, 2.0G, 3 axes, 1 hr. ea. axis
    MTBF    80,000 hrs. @ 25ºC
    Approvals    UL, CUL, FCC Class B, CB, TÜV
     

  • Geforce 7800 gtx card in my mac ?

    Hi,
    to troubleshoot a display problem with my MacG5, ( http://discussions.apple.com/thread.jspa?threadID=1121100&tstart=0 ) I would like to install a second graphic card in it. I have a PC Nvidia Geforce 7800 gtx card. Can I install this without any problem in my Mac ?
    Do I have to modify anything (flash the card ROM) to make this work ?
    Any info on this would be much appreciated.
    Thanks.
    Guillaume.

    No...the card won't work. Unless you can flash it to work in a Mac. That's no easy task.

  • Correct rom for Geforce 7800 GTX for Mac G5?

    I just got my hands on a Nvidia Geforce 7800 GTX 512 and would like to flash it to work on my Quad G5. I know it is floaing around out there somewhere in our Ether-Space. Would some kind soul please share? Thanks

    I recently acquired a Late 2005 PowerMac G5 2.3 Dual Core. It came with the sluggish GeForce 6600. I too am interested in flashing a 7800 GTX with a ROM for Mac.
    Will any brand 7800 GTX qualify? I understand there may be a problem with cards having different ROM sizes. Could anyone list specific brand cards they would recommend for this purpose? I know I shouldn't expect to find any new ones. I will look in all the usual places.
    Also, is it important to get the GTX and not the GT?
    Thanks.

  • GeForce 7800 GTX 512MB

    PC users can now get a souped up GeForce 7800 GTX with 512MB of DDR3:
    http://www.newegg.com/Product/Product.asp?Item=N82E16814130259
    I wish Apple would offer that same card with Apple firmware for the Dual-Core G5s.

    Amen to that. Cheers on your great site, too!
    --from an islander "still" in the islands

  • PowerMac G5 Quad GeForce 7800 GTX 512mb or Quadro 4500 FX

    Hey, best regards for all users. I have a question about changing graphics card. I'll be gratefull for all help.
    I have PowerMac G5 Quad Late 2005 - M9592LL/A and OS X Leopard 10.5.8.
    My card is GeForce 7800GTX 512MB and Quadro fx4500 model p348.
    I'm looking for ROM for this cards for Mac G5. I want to change 6600 for 7800GTX 512MB or Quadro. Cards tested on PC are working.
    Anyone can help ? I can't find any info about ROM for this cards.
    Thanks all !

    Both the X1900 (R580) and the 7800 GTX (G70) are capable GPUs on advanced cards, both targeting and supporting Shader Model 3.0. 3D was a focal point in development for either card.
    Approaches for shader implementation are very different between the two cards.
    Arguements for either abound, but, 3D performance will be a defining factor to show shader prowess.
    Architecturally, the cards are very different, but, in the end, memory bandwidth, an important performance feature, is highest with the 7800 GTX; 54.4 GB/s vs. 38 GB/s for the Mac Edition Radeon.
    The next X19xx card, the X1950, almost doubled memory bandwidth over the X1900.
    I know guys that use flashed X1950 (512 MB) cards really like them.
    Support of DirectX 9 and Shader Model 3.0 make either card more than is necessary for OS X Core Image and OpenGL requirements.
    You bring up a very important point regarding application specific performance.
    Games are one form of benchmark, but not always indicative of real world performance.
    In Photoshop, CS4, the 7800 GTX is a fully supported card, whereas the X1900 (256 MB) card is not supported. The 512 MB version of the X1900 is supported, but doesn't help owners of the Mac Edition.
    There are pros and cons with either card, eventually driver and OpenGL support being the defining point.
    Early driver issues with the X1900 in OS X and a relatively short retail availability likely affect the lack of empirical data on the cards performance.
    The following, though comparing a X1900XT (not the little brother X1900GT which is the G5 version) with a Geforce 7800 GTX on platforms other than Mac, the comparisons do show pro oriented application performance.
    Though not necessarily applicable to OS X and PPC Macs, I thought it to be an interesting set of tests.
    http://ixbtlabs.com/articles2/cpu/nvidia-vs-ati-on-amd-and-intel.html
    Either card is great, either is way better than the 6600, and, as you point out, availability is an important factor.

  • Nvidia geforce 7800 GTX 256/512 ROM for G5

    Hello,
    Im looking for a few ROM files for the nvidia Geforce 7800 GTX 512 and 256 Models for use in a pci-e G5, but I cant seem to find them anywhere else. could someone please send a copy to:
    [email protected]
    that would be very much appreciated

    Might try this...
    http://forums.macrumors.com/showthread.php?t=1552556
    No idea if the great japamac will respond, but..
    https://discussions.apple.com/people/japamac

  • K8N Neo3 with a GeForce 7800 GTX?

    Hello, I got a AMD64 3200 (socket 754) processor with a K8N Neo Platinum motherboard.
    I want to upgrade my videocard and I am thinking of a GeForce 7800 GTX. Because of the futurure I want a pci-e card, so I am thinking of changing my motherboard to a  K8N Neo3 motherboard. I searched everywhere online (including this forum and the msi site) but I can't find if this motherboard is compatible with a GeForce 7800 GTX. Can anyone provide me with the answer? Thanks.

    Quote from: Luke51087123 on 25-August-05, 08:51:29
    neo 3?? thought there was only 2 and 4.  Im prob wrong but the nforce 4 chipset is the only one for pciE
    I think you are right about the nforce 4, but the K8N Neo3 got the nforce 4. Here is the link:
    K8N Neo3

  • Geforce 7800 GTX won't fit in MSI K8N SLI !

    Hey we all know the problem with MSI K8N SLI and 2 Geforces 7800 GTX:
    http://www.theinquirer.net/?article=24239
    What revision of MSI K8N SLI will fix this problem ? ( i need this info when i will go to store)
    and can you tell me is this problem egzist on Microstar K8N SLI Diamond nForce4 SLI mobo ?

    Quote from: aduh on 03-July-05, 00:58:22
    sorry man i'm lazy sluggard, my women tells me this everyday ...
    LOL, well I have this MOBO and due to the "issue" I will be going to a single card it looks like...but to tell the truth, I never saw that much improvement with dual 6800ultras. I am thinking one new 7800 will be more then enough. Only time will tell

  • MSI Geforce 7800 GTX with MSI Nvidia GeForce 7800GT in SLI?

    Hi. I bought the MSI Nvidia GeForce 7800GT a few months ago with the intention of buying a second to run in SLI. Now i can't seem to find anywhere that sells it at a decent price. Originally i bought it from www.ebuyer.co.uk but they have discontinued it.
    Could i buy a MSI Geforce 7800 GTX and run it in SLI? They should have the same gpu and the specs aren't that different. 

    Quote from: BG84 on 12-August-06, 23:42:56
    what brand, where are you, how much?
    MSI Nvidia GeForce 7800GT 256mb PCI-Express Dual DVI + TV Out
    NX7800GT-VT2D256E
    Not far from Birmingham
    Price, really don't know. whats your best offer? 

  • Power Mac G5 7800 GTX 512mb

    Hi everyone, not been a member here long but I am in desperate need of some help and/or direction
    I realise this is probably a heavily discussed topic but i'm another guy in need of some help.
    I own a DC 2.0 Power Mac G5 and it had a 6600 128mb graphics card which subsequently died the other day. I have gone ahead and bought a Dell 7800 GTX 512mb graphics card with the intention of flashing it.
    I have no problem with the flashing procedure itself, I am having trouble locating a ROM for it. At first I thought I could flash the Quadro FX 4500 2149 retail ROM but later found out that the Quadro FX 4500 ROM needs HEX editing which I cant locate a guide for the procedure. Ideally, if at all possible I would like somebody to provide me with the ROM file but in the meantime I am trying to make headway myself.
    I've contacted japamac through his website to see if he could provide me with the ROM and am still awaiting a response. I realise the guy is busy so i'm trying to do the work myself. Does anyone have a link to a guide to hex edit the Quadro FX 4500 ROM to work on the 7800 GTX 512mb.
    Any help is massively appreciated guys. Thanks for looking.

    Hello
    I am looking for the Geforce 7800GTX 512MB ROM for flashing my Card
    can someone help me here ?
    Thanks for your help

  • Geforce 7800 gt problems...

    So I purchased a quad g5 the other day with intentions of upgrading the video card, went out and bought a geforce 7800 gt, only to realize that ONLY apple makes/customizes/ the 7800 that they ship out with their computers.
    Is there anyway for me to get my card up and running in my g5? ive searched online for drivers and firmware updates but ive come across nothing.
    I think this is really poorly done on apples part, they should have some sort of support for the card since in the apple store its one of only 3 choices to pick from for a video card.
    quad g5   Mac OS X (10.4.4)  

    You are experiencing the frustration that we all feel that want a GeForce 7800 GT or GTX on our Dual-Core or Quad-Core.
    Maybe we should start an email campaign to convince the Power Mac product V.P. to add the 7800 GT as a retail kit.
    Meanwhile, ATI demonstrated a Radeon X1800 XT at MacWorld. It's a faster card than the stock 7800 GT. Hopefully it will ship soon.

  • Geforce 7800 AGP in a G5

    Hey all,
    Just bought a new GeForce 7800 AGP card to replace the Geforce FX 5200 in a 1.8 PowerPC G5. Shared a power output using the splittler which was sent with the card (split it with the disc drive in the above bay). The card seemed to fire up with the blue lights but I didn't get any video output. Tried both of the connections on the 7800 to no avail. Am I missing something here? Supposedly this is a MAC card as well. You can see it at
    http://cgi.ebay.com/Mac-nVidia-GeForce-7800-GT-256MB-AGP-Video-Card-G4-G5W0QQitemZ280388805836QQcmdZViewItemQQptZPCC_Video_TV_Cards?hash=item414879a4cc&_ trksid=p3286.c0.m14#ht_5428wt1047
    Thanks
    Michael

    Hi-
    Wouldn't be the first card from that guy that wasn't flashed properly.
    Contact him and arrange for replacement, as it should be plug and play.
    This guy is the originator (I believe) of the 7800GS conversion.
    Very reliable.
    Also very reliable is This guy.
    Supposedly this is a MAC card as well.
    MAC: http://en.wikipedia.org/wiki/Messageauthenticationcode
    Mac: http://en.wikipedia.org/wiki/Macintosh
    I just thought of something else-
    Are the #3 and #11 pins on the card taped? If so, remove the tape, as the G5 doesn't need the modification.
    http://themacelite.wikidot.com/pins-3-and-11
    Message was edited by: japamac

Maybe you are looking for