GeForce 7900GS just doesn't work at all..
The nVidia site says that the 7900GS is Mac OS X compatible.. but I have it plugged into my G5.. and well.. sigh
Nada.. and I can't find any drivers to install. Basically the card just doesn't output anything.. so.. blah..
I got suckered by that little piece of false advertising by Nvidia too. The GPU is OS X compatible, but the card manufactures don't make Mac cards. It's due to a 128k file in the ROM chip (64k for PC BIOS, 128K for Mac). Remember, Nvidia doesen't make or sell video cards; they only make the GPU. Anything on Nvidia's site about OS X compatibility is completely meaningless.
Similar Messages
-
My iphone's home button doesn't always work. I sometimes have to press it several times to get to my home screen. Many times this doesn't work and I just give up. It is happening more frequently now, almost daily and usually lasts all day when it's having a bad day. I've tried calibrating it and I've also tried a phone reset; neither helped. Any suggestions?
Re-Calibrate it. Press the power button until the slide to turn off shows. DO NOT TURN IT OFF. Leave it on the slide to unlock screen and press the home button for about 30 seconds until the slide to turn off screen leaves.
-
IPOD Shuffle Just Doesn't work at all
My step daughter has an ipod shuffle, and when you press any button, the amber and green flash alternatively and the thing doesn't work. The computer doesn't even register that it is connected. I have tried other USB ports to no avail. Sometimes the computer recognises it, but states that the device is faulty. I can't therefore reset the thing. What is worng. Can anyone help me???????
Shuffle version 1 Windows XPMy step daughter has an ipod shuffle, and when you
press any button, the amber and green flash
alternatively and the thing doesn't work. The
computer doesn't even register that it is connected.
I have tried other USB ports to no avail. Sometimes
the computer recognises it, but states that the
device is faulty. I can't therefore reset the thing.
What is worng. Can anyone help me???????
Is it still under warranty? Check here:
http://www.apple.com/support/contact/
You might be able to get it replaced... Otherwise, try this: http://docs.info.apple.com/article.html?artnum=303979 -
IBooks just doesn't work at all
To sum up:
Removing the iBooks' Library fix the issue until I launch iTunes and I will get this error message everytime I try to open a book (from the iTunes Store or one I dropped in iBooks).Whoops, sorry for the huge images' size
-
HI, I just got a Macbook Pro. It's great but my mail doesn't work at all. It will come up correctly, but take forever to download messages, then won't delete them, then won't save them to folders. Then when I go to quit mail it's like it gets stuck between quitting and not. I have to force quit, then restart my computer if I want to pull up my mail again. How can I fix this?
If you just got your new MBP you have phone support from Apple (which is quite good) call them. 800-692-7753 tell the automated answerer "mail technical support" you'll have human quite quickly. Hope this helps.
-
The Game Center used to work with my Apple ID before I updated to iOS 7.4, I used to play multiple player with EA Real Racing 3 game but it doesn't work at all and every time I tried to go to the Game Center it's just blank, even to the settings nothing!
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>Game Center and sign out and sign back in
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
My new iPhone 4 doesn't work at all
You are definitely not alone with your issues. I'm on my second iPhone 4 unit, and am still having the same problems. I've had proximity sensor insanity, battery draining after 8 hours of stand-by (NO USE, just sleeping) to the point that my phone goes into a coma and has to be plugged in to be revived, the grip of death dropping calls....
But the single most irritating and infuriating problem is the signal strength/reception fluctuation. I share a house with two iPhone 3Gs users, and I had an original silverback iphone until July 2010. They all work fantastically well with no issues when I'm at home (where I am just about 24/7, since I work from home). *_My new iPhone 4 doesn't work at all.*_. Signal strength is all over the place. I did a test where I sat watching the bars showing signal strength for five minutes. In that time, I saw it switch from E (edge?) with full bars to 3G with full bars to 3G with 1 bar to 2 bars to 4 bars to 1 bar to "Searching." Then back to 3G, with degradation of bars from 3 to none, then E network appears again, this time with full strength. This all with the phone sitting on a table, not being touched by human hands.
It seems that my iPhone is constantly switching actual physical networks, and as a result signal strength is all over the place from one 30 second period of time to the next. This drains the battery like crazy, and means that all incoming calls go to voicemail--usually without my phone ever ringing.
The 3G phones in my house work great. The 1st G iPhone I have had since the week it came out worked great (though its battery doesn't hold much of a charge anymore, after three years). On my new IP4, games are awesome. The videos and photos are amazingly clear and high quality, and editing on the phone is out of sight. iPhone Apps rule. MobileMe syncs my contacts quickly and easy. The only thing I love more than the iP4 features is my iPad--it rocks.
Everything works on my IP4 at home BUT THE ACTUAL TELEPHONE FUNCTIONS. This is unacceptable. In late August, after two weeks in which I had 4 minutes of phone use, the nice folks at the Apple store switched me to a new phone, no questions asked. The phone worked so much better, I could send texts and place calls most of the time (this was now the first part of September)...except that now that I was using my IP4 to make phone calls, I started having a problem with the proximity sensor during those calls. I'd be talking and my cheek would mute the phone, turn on speaker, open contacts and edit info (with gobbledygook), and of course, hang up on people.
So around Sept. 18 I was told by Apple phone support to update to iOS 4.2, restore as new, and do two complete power up and drain down cycles. This would fix the proximity sensor and any other issues.
Well, I would love to see if iOS 4.2 actually did fix the PS, but I can't get the signal strength to stabilize long enough to have an actual phone conversation. I'm back to watching the signal strength go up and down at random (with me touching/holding it carefully to avoid grip of death, and also when I leave phone on the table with screen lock off --no touching). It is back to switching between E network and 3G and varying strengths of wi-fi from my home network. This eats up battery from 100% to low enough to turn off in under 10 hours of standby (usually 6-7). Essentially, my IP4 is back to being unusable as a phone.
So I did another long, involved call to Apple tech support on 9/18. They tell me that I have to turn off wi-fi, turn off 3G, turn off push/fetch and notifications, shut all apps (no multi-tasking) and do everything but switch my phone to airplane mode--and see if the battery holds up for 24 hours in standby. If that didn't work, I should restore from new, but not load any contacts or network or data or anything--just leave it as it would be out of the box new.
As a test, I turned everything off as advised: 3G, wi-fi, push, etc. Now my battery life is back to normal, where I can have the IP4 on stand-by for up to two full days before needing a recharge. Fabulous. BUT IT'S NOT A SMART PHONE if I have to turn off 3G, turn off wireless, and not use email push and so forth.
I'm so frustrated I could scream. I'm quickly coming to the conclusion that there is a significant flaw in the new iPhone. Or perhaps it is just an issue for iPhone 4 users in areas where the signal strength is marginal, or where there are two types of overlapping network coverage (E and 3G in my case). I know that the networks themselves are in good condition--though I'm in a semi-rural area, the state capital is 4 miles away, and I know they have a new tower and good coverage for the politicians and power brokers around town. The phone coverage area I live in has Edge network in the south part of the network area and 3G in the north part, which is the state capital. I'm right in between. Could this be the problem? AT&T says no, it's Apple's fault.
Message was edited by: HighSierraSo what to do besides complain? Troubleshoot?
I just wonder if all of us who have had chronic signal strength and "Searching for network" issues that totally drain the battery might have something in common, despite being all over the world? I'm using wi-fi 95% of the time, and live in a semi-rural area with overlapping networks run by same carrier. Apple folks hinted that maybe in my area the network usage is nearing capacity (resulting in getting kicked off of 3G and down to E as new calls are placed that strain capacity). They also hinted there could be interference from mountains or other objects. But here's the thing--3G phones work fine, and my IP4 works fine when I'm away from home, usually in the capital city on strong 3G network. (When I say "works fine I mean the signal is good and calls go through, I haven't tested battery drain away from home yet).
I have to conclude that the problem is the IP4 itself--something about the hardware or the software (namely, the way it connects to the phone network) is horribly wrong. Other folks who live in urban areas or with strong networks that (likely) aren't over-utilized don't seem to have this issue. After reading through these pages, it also seems the wi-fi may be a major culprit in draining the battery and in varying signal strength (this is from Apple phone support, which said that varying signal strength and the constant pinging off the home wi-fi is creating a "power struggle" and keeping the phone constantly looking for the best connection option). Mind you, 3G iphones on the same home network have no problems whatsoever.
So while I'm not a technical expert, it seems like the problem HAS to lie in the differences in the way the IP4 connects to the cellular and/or wi-fi network. And since the connection/signal strength problem was "resolved" on my replacement phone, but then "broken" again by the software update of iOS 4.2, I'm leaning toward this being a software issue. I've offered to help Apple troubleshoot, and I'm trying to be patient--because the IP4 is a work of art and I've never had an issue with an Apple product before. But all they want me to do is restore, restore, reload, restore, and then drive 1 hour to the nearest Apple store (in Reno, NV) and get a new phone...and start the whole process over again. I don't have time for this, I need my phone back.
I'm this close to trading in my beautiful but flawed IP4 for a 3G. Maybe I should just get a new battery for my original iPhone from 2007?
I understand that Apple can't test for every possible variable of use all over the world, but they don't even seem to acknowledge that they have a problem with the IP4 that will not be resolved by replacing it with a new unit. They want me to believe it's a fluke, or it's just me...but I've been combing these threads and see a lot of people reporting the same issues I am--battery drain and wildly fluctuating signal strength issues, wi-fi problems, and dropped calls. Can't someone get on this? Because otherwise Apple is going to have to admit that their IP4 is not a good solution for people who live in areas of less than perfect signal strength or use wifi or whatever demonic combo I have in my home/work setting.
Or people will have to do what I have done--if you who want the cool IP4 non-phone features, you will have to dumb down your IP4 in order to have it be even moderately useful as *a phone.* For $599 I expected better.
My (temporary) workaround?
To spare the battery:
*Turn off wi-fi (which *****, because now I have to burn minutes when I'm at work using the email, downloads, safari, etc--and it's E network, so it's SLLOOOOOOOW)
*turn off push and fetch, have mail get new messages manually
*turn off data roaming
To keep the signal somewhat stable (making it easier to complete calls and spare battery)
*Turn off 3G (this leaves me on E network--fabulous, I had that with my 3 year old iPhone)
*grip IP4 between two fingers placed at the top of the phone, away from death zone. Tough for us lefty phone users.
*pray the free bumper will a) come soon and b) help. I'm not optimistic.
To keep proximity sensor from going nuts and dropping calls, muting, turning on speaker etc:
*use headset or bluetooth (unless you are also having one of the known bluetooth issues!)
*keep phone pressed to one ear and don't move it a millimeter. Don't shift sides, don't hold phone with your shoulder, just keep it to one ear and talk fast).
I'm about out of patience. I understand that lots of folks have and love their IP4s. I'd love to be one of those people. I'm open to suggestions and have spent many hours on phone with tech support, restoring my phone, reloading data and apps--there has to be a better way.
Sorry for the thread-jacking, but someone from Apple has got to be following these threads--help us!
null -
L2TP on Cisco ASA 5505, just doesn't work??!
This is pretty urgent, client expects me to have this up by lunch today
So, there is this Cisco ASA 5505 ver 8.4.
Most things work but now I want to setup a vpn connection...
I have done this 2 ways, first by using the "VPN Wizard" in ASDM and then 5 hours later removing everything and configuring from cli.
And it just doesn't work, client (WinXP & Win7) gets "error 792" and sometimes "error 789" (both indicating problem with phase 1, I'm pretty sure of that)
Googling on those gives a few suggestions none works.
All I get in the log on Cisco is the "Error processing payload: Payload ID: 1"
Googling on that only comes up with a few pages telling me this message is caused by an error. (Yeah, I could never have guessed...)
For the cli config, I followed this tutorial carefully (3 times actually...)
http://www.cisco.com/en/US/docs/secu...html#wp1117464
I'm using PSK for IPSec, entered same on Cisco and client - checked several times, this is not a password/PSK issue.
Ports opened on Cisco: 500, 1701, 4500
(For a try I opened all ports, no change.)
And here's the "show run":
Code:
ASA Version 8.4(2)
hostname ciscoasa
enable password <string> encrypted
passwd <string> encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
switchport access vlan 7
interface Vlan1
nameif inside
security-level 100
ip address 192.168.5.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address #.#.#.# 255.255.255.252
interface Vlan7
description VLAN till kontor
no forward interface Vlan2
nameif kontor
security-level 100
ip address 172.16.5.1 255.255.255.0
ftp mode passive
clock timezone GMT 0
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network Webserver
host 192.168.5.2
object network Webserver443
host 192.168.5.2
object network rdp
host 192.168.5.2
object network vpnserver
host 192.168.5.2
object service vpn-service-group
object network VPN
host 192.168.5.2
object-group service Webports tcp-udp
description Portar för webbserver
port-object eq 443
port-object eq www
object-group service DM_INLINE_TCP_1 tcp
group-object Webports
port-object eq www
object-group protocol TCPUDP
protocol-object udp
protocol-object tcp
object-group service VPNports tcp-udp
port-object eq 1701
port-object eq 4500
port-object eq 500
object-group service RDP tcp-udp
port-object eq 3389
object-group service vpn-services tcp-udp
port-object eq 1701
port-object eq 500
access-list outside_access_in extended permit tcp any object Webserver eq www
access-list outside_access_in_1 extended permit tcp any object Webserver object-group DM_INLINE_TCP_1
access-list outside_access_in_1 remark Ãppnar för vpn
access-list outside_access_in_1 extended permit object-group TCPUDP any any object-group VPNports
access-list outside_access_in_1 extended permit object-group TCPUDP any any object-group RDP
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
mtu kontor 1500
ip local pool vpn1 10.10.10.10-10.10.10.50 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
object network obj_any
nat (inside,outside) dynamic interface
object network Webserver
nat (inside,outside) static interface service tcp www www
object network Webserver443
nat (inside,outside) static interface service tcp https https
object network rdp
nat (inside,outside) static interface service tcp 3389 3389
access-group outside_access_in_1 in interface outside
route outside 0.0.0.0 0.0.0.0 79.142.243.33 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
aaa authorization command LOCAL
aaa authorization exec LOCAL
http server enable
http 0.0.0.0 0.0.0.0 inside
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA mode transport
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set TRANS_ESP_3DES_SHA mode transport
crypto ipsec ikev2 ipsec-proposal 3DES-SHA
protocol esp encryption aes-256 aes-192 aes 3des
protocol esp integrity sha-1 md5
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal 3DES-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ca trustpoint ASDM_TrustPoint0
enrollment self
subject-name CN=ciscoasa
proxy-ldc-issuer
crl configure
crypto ca certificate chain ASDM_TrustPoint0
.... (sorry, not giving you the cert...)
crypto ikev2 policy 1
encryption 3des
integrity sha
group 2 1
prf sha
lifetime seconds 86400
crypto ikev1 enable outside
crypto ikev1 policy 10
authentication pre-share
encryption 3des
hash md5
group 1
lifetime 86400
crypto ikev1 policy 20
authentication rsa-sig
encryption aes-256
hash sha
group 1
lifetime 86400
crypto ikev1 policy 30
authentication pre-share
encryption aes-256
hash sha
group 1
lifetime 86400
crypto ikev1 policy 40
authentication crack
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 50
authentication rsa-sig
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 60
authentication pre-share
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 70
authentication crack
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 80
authentication rsa-sig
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 90
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 100
authentication crack
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 110
authentication rsa-sig
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 120
authentication pre-share
encryption 3des
hash sha
group 1
lifetime 86400
crypto ikev1 policy 130
authentication crack
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 140
authentication rsa-sig
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 150
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh scopy enable
ssh 0.0.0.0 0.0.0.0 inside
ssh 0.0.0.0 0.0.0.0 outside
ssh timeout 10
console timeout 0
no vpn-addr-assign aaa
no vpn-addr-assign dhcp
l2tp tunnel hello 100
dhcpd dns 8.8.8.8
dhcpd auto_config outside
dhcpd address 192.168.5.11-192.168.5.36 inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy DefaultRAGroup internal
group-policy DefaultRAGroup attributes
vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec
address-pools value vpn1
group-policy DfltGrpPolicy attributes
dns-server value 79.142.240.10
vpn-tunnel-protocol l2tp-ipsec
address-pools value vpn1
username test password <string> nt-encrypted
username someoneelse password <string> nt-encrypted privilege 15
username someoneelse attributes
vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec
service-type admin
username someone password <string> nt-encrypted privilege 0
tunnel-group DefaultRAGroup general-attributes
authorization-server-group LOCAL
tunnel-group DefaultRAGroup ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group DefaultRAGroup ppp-attributes
authentication ms-chap-v2
tunnel-group vpn1 type remote-access
tunnel-group vpn1 ipsec-attributes
ikev1 pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
privilege cmd level 3 mode exec command perfmon
privilege cmd level 3 mode exec command ping
privilege cmd level 3 mode exec command who
privilege cmd level 3 mode exec command logging
privilege cmd level 3 mode exec command failover
privilege cmd level 3 mode exec command packet-tracer
privilege show level 5 mode exec command import
privilege show level 5 mode exec command running-config
privilege show level 3 mode exec command reload
privilege show level 3 mode exec command mode
privilege show level 3 mode exec command firewall
privilege show level 3 mode exec command asp
privilege show level 3 mode exec command cpu
privilege show level 3 mode exec command interface
privilege show level 3 mode exec command clock
privilege show level 3 mode exec command dns-hosts
privilege show level 3 mode exec command access-list
privilege show level 3 mode exec command logging
privilege show level 3 mode exec command vlan
privilege show level 3 mode exec command ip
privilege show level 3 mode exec command ipv6
privilege show level 3 mode exec command failover
privilege show level 3 mode exec command asdm
privilege show level 3 mode exec command arp
privilege show level 3 mode exec command route
privilege show level 3 mode exec command ospf
privilege show level 3 mode exec command aaa-server
privilege show level 3 mode exec command aaa
privilege show level 3 mode exec command eigrp
privilege show level 3 mode exec command crypto
privilege show level 3 mode exec command ssh
privilege show level 3 mode exec command vpn-sessiondb
privilege show level 3 mode exec command vpnclient
privilege show level 3 mode exec command vpn
privilege show level 3 mode exec command dhcpd
privilege show level 3 mode exec command blocks
privilege show level 3 mode exec command wccp
privilege show level 3 mode exec command dynamic-filter
privilege show level 3 mode exec command webvpn
privilege show level 3 mode exec command module
privilege show level 3 mode exec command uauth
privilege show level 3 mode exec command compression
privilege show level 3 mode configure command interface
privilege show level 3 mode configure command clock
privilege show level 3 mode configure command access-list
privilege show level 3 mode configure command logging
privilege show level 3 mode configure command ip
privilege show level 3 mode configure command failover
privilege show level 5 mode configure command asdm
privilege show level 3 mode configure command arp
privilege show level 3 mode configure command route
privilege show level 3 mode configure command aaa-server
privilege show level 3 mode configure command aaa
privilege show level 3 mode configure command crypto
privilege show level 3 mode configure command ssh
privilege show level 3 mode configure command dhcpd
privilege show level 5 mode configure command privilege
privilege clear level 3 mode exec command dns-hosts
privilege clear level 3 mode exec command logging
privilege clear level 3 mode exec command arp
privilege clear level 3 mode exec command aaa-server
privilege clear level 3 mode exec command crypto
privilege clear level 3 mode exec command dynamic-filter
privilege cmd level 3 mode configure command failover
privilege clear level 3 mode configure command logging
privilege clear level 3 mode configure command arp
privilege clear level 3 mode configure command crypto
privilege clear level 3 mode configure command aaa-server
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:dd92aa6707dc63e8ed7dad47cfecdd47
: end
In Pingvino Veritas!I lmost got it working now, new problem is that the connection is immediately ended.
Logs shows that client is authenticated and assigned an ip.
From the logs, all happens during one second:
IPAA: Client assigned ip-address from local pool
IPAA: Local pool request succeeded for tunnel-group
IPAA: Freeing local pool address
L2TP Tunnel created, tunnel_id is 24
L2TP Tunnel deleted, tunnel_id =24
IPSEC: An outbound remote access SA has been deleted
IPSEC: An inbound remote access SA has been deleted
Session is being torn down. Reason: L2TP initiated
Teardown UDP connection -
Time Machine Just Doesn't Work Anymore
I was a happy Time Machine (with Time Capsule) user for months. But it just doesn't work anymore. It takes longer than an hour to do every hourly backup so it is backing up 24 hours a day. It finds hundreds of thousands of files changed every hour and tries to back them up. Finders says only tens of files have been modified all of today. I have tried rebuilding my spotlight indexes, repairing my Time Capsule with Disk Utility and starting over with a brand new backup. But it just backs up hundreds of thousands of files every hour. So I am turning off Time capsule since it is clearly broken. If anyone has any suggestions at all I would welcome them.
Marcia,
Consider the following, it might give you some ideas:
Time Machine performs backups at the file level. If a single bit in a large file is changed, the WHOLE file is backed up again. This is a problem for programs that save data to monolithic virtual disk files that are modified frequently. These include Parallels, VMware Fusion, Aperture vaults, or the databases that Entourage and Thunderbird create. These should be excluded from backup using the Time Machine Preference Exclusion list. You will, however, need to backup these files manually to another external disk.
One poster observed regarding Photoshop: “If you find yourself working with large files, you may discover that TM is suddenly backing up your scratch disk's temp files. This is useless, find out how to exclude these (I'm not actually sure here). Alternatively, turn off TM whilst you work in Photoshop.” (http://discussions.apple.com/thread.jspa?threadID=1209412)
If you do a lot of movie editing, unless these files are excluded, expect Time Machine to treat revised versions of a single movie as entirely new files.
If you frequently download software or video files that you only expect to keep for a short time, consider excluding the folder these are stored in from Time Machine backups.
If you have recently created a new disk image or burned a DVD, Time Machine will target these files for backup unless they are deleted or excluded from backup.
Installing new software, upgrading existing software, or updating Mac OS X system software can created major changes in the structure of your directories. Time Machine will backup every file that has changed since the installation.
Files or folders that are simply moved or renamed are counted as NEW files or folders. If you rename any file or folder, Time Machine will back up the ENTIRE file or folder again no matter how big or small it is.
George Schreyer describes this behavior: “If you should want to do some massive rearrangement of your disk, Time Machine will interpret the rearranged files as new files and back them up again in their new locations. Just renaming a folder will cause this to happen. This is OK if you've got lots of room on your backup disk. Eventually, Time Machine will thin those backups and the space consumed will be recovered. However, if you really want recover the space in the backup volume immediately, you can. To do this, bring a Finder window to the front and then click the Time Machine icon on the dock. This will activate the Time Machine user interface. Navigate back in time to where the old stuff exists and select it. Then pull down the "action" menu (the gear thing) and select "delete all backups" and the older stuff vanishes.” (http://www.girr.org/mac_stuff/backups.html)
*TechTool Pro Directory Protection*
This disk utility feature creates backup copies of your system directories. Obviously these directories are changing all the time. So, depending on how it is configured, these backup files will be changing as well which is interpreted by Time Machine as new data to backup. Excluding the folder these backups are stored in will eliminate this effect.
*Backups WAY Too Large*
If an initial full backup or subsequent incremental backup is tens or hundreds of Gigs larger than expected, check to see that all unwanted external hard disks are still excluded from Time Machine backups.
This includes the Time Machine backup drive ITSELF. Normally, Time Machine is set to exclude itself by default. But on rare occasions it can forget. When your backup begins, Time Machine mounts the backup on your desktop. (For Time Capsule users it appears as a white drive icon labeled something like “Backup of (your computer)”.) If, while it is mounted, it does not show up in the Time Machine Prefs “Do not back up” list, then Time Machine will attempt to back ITSELF up. If it is not listed while the drive is mounted, then you need to add it to the list.
*FileVault / Boot Camp / iDisk Syncing*
Note: Leopard has changed the way it deals with FileVault disk images, so it is not necessary to exclude your Home folder if you have FileVault activated. Additionally, Time Machine ignores Boot Camp partitions as the manner in which they are formatted is incompatible. Finally, if you have your iDisk Synced to your desktop, it is not necessary to exclude the disk image file it creates as that has been changed to a sparsebundle as well in Leopard.
Let us know if any of this helps.
Cheers! -
My iphone 5 went into search mode and I can't place or receive calls or use the internet but my text messages work. Sprint had me do a master reset and my phone doesn't work at all now I can't get it past the activation. Will I have to pay for repairs in store because I didnt get the Apple care plan when I purchased it. Sprint said it may be a phone problem not sure if I should take it to Sprint or Apple...I just need my phone
I'm sorry to learn that you are not able to make/receive calls chelseabee! (ticket number removed) results indicate that there is no issues with the network or account provisioning. Since you have already done a hard reset http://vz.to/1gBkSJc (as per your post), I recommend exploring replacement options. If your phone is within the one year manufacturers' warranty we can provide a Certified Like New replacement http://vz.to/uyYF0o as long as no physical/liquid damage exist. If your phone has sustained physical/water damage and you have insurance, you can submit a claim to the insurance company online at this link http://bit.ly/07CrqPK
AntonioC_VZW Follow us on Twitter at www.twitter.com/VZWSupport
>> Edited to comply with the Verizon Wireless Terms of Service <<
Edited by: Verizon Moderator -
Is there a way to fix an iPod touch 4G home button that isn't stuck but just doesn't work?
A couple weeks ago my home button got stuck. To fix it I found this video http://www.youtube.com/watch?v=yBfhCmq9VkA&list=WL429346A18D0B1E65 to help me out. The second option of using the charger ended up working, thus making the button work again. It was working fine after doing that but then it got stuck down again and I had to put the charger in and do that again. However, all of a sudden the home button just doesn't work anymore. It's not even stuck all the way down. I can press it repeatedly but still nothing.
I've had the iPod for about 6 months now and got it off of amazon refurbished so warranty is out of the question i'm sure. If it really is broken with no way to fix it then that's fine as i've been using assitive touch for weeks now and am used to it since i've been using it egulary since there's no other way. I just wanted to ask and make sure first before anything else though.Try:
http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
My Apple TV Gen 1 just doesn't work
Hello,
I have setup/reset/setup this device so many times it just drives me crazy. I honestly believe that this technology just doesn't work.
I have an iMac running the most up to date version of OS X 10.6.5, I have the latest version of iTunes, 10.1.1. I'm using the Airport Extreme.
I have followed the directions to the letter!
Please help!
Thanks,
Aloha
John
I have a number of movies, etc on my pc but to make things easier, i just opted to a custom sync, display only those items i have selected, and chose 3 movies only.
I can see them on my tv, but when i select play, i always get an error indicating that this device is not authorized to play the content. I have deauthorized/authorized my pc many times.
I'm thinking about just dumping all my apple products and just stick with a microsoft based pc.I am having the SAME issue. Just bought the Apple TV 1st Gen. from AppleStore, then followed the instructions to the letter. I am using iMac 10.5.8, Airport Extreme Base Station, AppleTV, and I have the most up-to-date iTunes and also made sure AppleTV is up to date. I get the same stupid error messages indicating the device is not authorized. Called Apple (no)Support, and was walked through restarting all my devices (like I didn't already try this, but just to make 'em happy, did it again...), didn't resolve the issue. "Steve" was like "...hmm, that shouldn't be doing that..." Really, dude? Maybe that's why I called you. Thanks for your time. Hope you guys enjoy my money I gave you.
Anyone have any ideas? I am about to pack this thing up and send it back. When I purchase ALL Apple products that are advertised as being able to just plug and go, it should freakin' work. -
Finally got round to buying an iPhone 4, really excellent to start with. The sharing of music from my Mac Mini was excellent. ios6 update has ruined all that! The artist view miss's out most of my music and the sharing sometimes doesn't work at all!
How do I get this feature working again? I am reluctant to move to iTunes 10.7 because I don't trust Apple at the moment.My suggestion:
1) Always using MAC AIR with the power plug in.
2)Don' let the power level of battory fall under 30% percentage.
3)If the MAC can't be recharged now, just let it be with power plugged, WAIT... -
ISight just doesn't work on Windows 7 64Bits
I'm a new MacBook Pro user for a few days. I was attracted by the design of MacBook and knew I could install Windows on it, so after shopping for some time, I decided to get MBP 13". I got Windows 7 64Bits installed yesterdat; all the drivers are installed as well. I went to Control Panel\System, and I saw "Built-in iSight" listed. However, the camera device just doesn't work. In Control Panel, I didn't see the "Imaging and Scanning" icon. I tried to uninstall and reinstall the driver and no luck. I'm already using the latest Boot Camp, and I just don't know what to do now. I really need the camera working. Can someone help?
Does this help? http://discussions.apple.com/message.jspa?messageID=11953256#11953256
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.4) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.4)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight -
Logic pro x native instrument issue: the vintage B3 organ doesn't work at all!
I installed logic pro x, and the vintage B3 organ doesn't work at all! Oddest thing? Help?
Yes, the little blue power "button" is pressed in the window for the organ.
Yes, my other instruments seem to be working just fine...OK, I solved my problem - I don't know why I didn't see the other responses on this earlier. Turns out the midi output has to be set to channel 1....
Maybe you are looking for
-
FMLE Bug: Encoder changes video input from Composite to SVHS
I have a video signal on the Composite input of my video card and I am encoding using FMLECmd.exe The problem is that when I change the video input to "Composite" using the Video Device's Property Pages, FMLECmd.exe sets it back to SVideo again after
-
Can we use more than 1 credit card for icloud family Sharing?
Can we use more than 1 credit card for icloud family Sharing? We are grown up, with our own credit cards, own incomes, and own financial. But we would like to share apps, music, photos, books, vidéos etc.. like any other family. No one (even the pare
-
Portlet Screen Chaining Problem
Hi all, I've made a PDK-java portlet that is identicle to the multipage portlet example using JDeveloper. The portlet shows up fine on the page; however when I click on the "second page" link, I get the javascript error "Object expected". Reviewing t
-
How to get the printer to scan from the top several pages at the same time?
-
Hi, i am thinking of buying iPad Air 2 to be both my phone and tablet. Can i insert sim into it and use it as a phone in any country?