Geforce 8800 gt not loading
I have an older HP desktop running a Geforce 8800gt video card. The system is Windows Vista. I wish I could change it but the flight simulation software I have on it can't be replaced. Anyway, every once in a while, when I would turn on the main computer the video card would not work (no screen). I would play with the wires and give the computer a "loving tap" and it would be fine. This last time, after several months dormant, it will not give me a screen. I removed the card and put it back in and still nothing. The fan kicks on, but stays on. (before when it worked, the fan would only kick on for a couple seconds then cycle off). I tried to connect a monitor to the onboard card, but nothing came out there either. What can I do? is it a card issue or is it the computer. Any suggestions?
Thanks
Hi,
Recheck all of the cables and if you have extra known good cables and a different monitor then those components to eliminate those components.
Try the 8800 in another PC and see if the 8800 still works.
There is also the possibility that the power supply in your PC is faulty.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT
Similar Messages
-
Mac Pro 3,1 GeForce 8800 GT not working after Lion update
Hi everyone. I'm from Spain, so please excuse my English.
My Mac is booting, but video card is not recognized.
Could get in using Screen Share and no video card appears in system profile.
Tried to restore Snow Leopard and Leopard in target disk mode, but video card is still not working (fan is on all the time).
Don´t know what else to try...I think I'm trying this: http://www.youtube.com/watch?v=T7um_hZYom4
-
My Mac Pro w/ NVIDIA GeForce 8800 GT does not detect a second display from the System Preferences / Displays. Even though I select the "Detect Displays" button, nothing happens. I also have Bootcamp and Windows 7 in a partition on my drive. When I operate with Windows 7, there is no problem detecting both of my displays. However, when I operate with Windows 7, there is no sound signal sent from my sound card. When I switch back to the OS X then I get a sound feed from the sound card, but then it will not detect more than one monitor. I'm ready to pull out my hair. Anyone have suggestions?
http://store.apple.com/us/product/MC094Z/A
Leopard 10.5.6 DVD (Amazon has it for $106) -
I have a 24 inch iMac with a NVIDIA GeForce 8800 GS video card. The computer is out of warranty.
A while back I noticed that, while playing World of Warcraft, the computer would have a sort of graphical glitch and then freeze up.
This happened a few times, infrequently, until finally the computer would not start at all.
At the startup screen with the apple logo, the wheel would spin a minute, then pixels would appear all over the screen and it would freeze. The screen would then turn to a bright orange color and stay that way.
I took it in to the mac store, where I was told the video card had failed.
They replaced the video card, which I had to pay for, due to the computer being out of warranty.
I have had the new video card now for about two weeks. I just loaded World of Warcraft for the second time on it. After playing for less than 20 minutes, the screen glitched out (pixelated flashes) and then froze.
I am now afraid to play the game.
I have never had the computer freeze while doing anything else.
Considering I just spent $600 to replace the last video card, is there anything I can do to figure out what exactly is causing this problem?
Thanks.Hi Riley71
I'm not sure what you were charged $600 for, but I would take it back and either ask for my $600 back or that it be fixed correctly.
Dennis -
Premiere Pro not loading after splash screen, can't find fix on forums.
Fresh install, doesn't matter what I do to this machine, memcheck came out ok. I click on Premiere Pro CS3 icon loads splash screen, then kicks out an error code.
EventType : BEX P1 : P2 : 0.0.0.0 P3 : 00000000 P4 : unknown
P5 : 0.0.0.0 P6 : 00000000 P7 : 00000000 P8 : c0000409
P9 : 00000000
I have a fresh install of window XP home edition service pack 3, 3 gigs of ram, Ati x1200 on board memory, (also have a nvidia 8800gt that I thought was the problem...it's not.) Most up to date drivers. Running two sata hard drives both 250 western digitals.
system information
OS Name Microsoft Windows XP Home Edition
Version 5.1.2600 Service Pack 3 Build 2600
OS Manufacturer Microsoft Corporation
System Name DESK
System Manufacturer MICRO-STAR INTERNATIONAL CO.,LTD
System Model MS-7327
System Type X86-based PC
Processor x86 Family 15 Model 107 Stepping 2 AuthenticAMD ~2494 Mhz
BIOS Version/Date American Megatrends Inc. V1.6, 2/28/2008
SMBIOS Version 2.5
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume2
Locale United States
Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413-2111)"
User Name DESK\Auggie
Time Zone Central Standard Time
Total Physical Memory 3,072.00 MB
Available Physical Memory 1.28 GB
Total Virtual Memory 2.00 GB
Available Virtual Memory 1.96 GB
Page File Space 3.85 GBok, one more time. I have a problem with Premiere Pro CS3 Crashing after the splash screen. It loads everything right on the splash screen, but when it goes to loading the work areas, it goes white and comes up with the error code of :EventType : BEX P1 : P2 : 0.0.0.0 P3 : 00000000 P4 : unknown
P5 : 0.0.0.0 P6 : 00000000 P7 : 00000000 P8 : c0000409
P9 : 00000000
What ever that is.
I have an amd 4800+ Dual Core and 3 gigs of ram. An Nvidia 8800gt with latest drivers installed for all of it. Running windows XP home sp 3 build 2600 More information on my system below.
I've re-installed 3 times, and even tried a clean install of vista. I've done the hold shift while loading and get the same issue no matter what. I've Deleted the premiere folder in local settings.
I've done all the steps at http://premierepro.wikia.com/wiki/Troubleshooting
a screen capture from process explorer and cpu fan can be found here http://www.theslam.net/images/desktop.jpg
DXdiag file can be found at
http://www.theslam.net/images/DxDiag.txt
hopefully this helps.
OS Name Microsoft Windows XP Home Edition
Version 5.1.2600 Service Pack 3 Build 2600
OS Manufacturer Microsoft Corporation
System Name DESK
System Manufacturer MICRO-STAR INTERNATIONAL CO.,LTD
System Model MS-7327
System Type X86-based PC
Processor x86 Family 15 Model 107 Stepping 2 AuthenticAMD ~2494 Mhz
BIOS Version/Date American Megatrends Inc. V1.6, 2/28/2008
SMBIOS Version 2.5
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume2
Locale United States
Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413-2111)"
User Name DESK\Auggie
Time Zone Central Standard Time
Total Physical Memory 3,072.00 MB
Available Physical Memory 2.36 GB
Total Virtual Memory 2.00 GB
Available Virtual Memory 1.96 GB
Page File Space 5.84 GB
Page File C:\pagefile.sys
Name NVIDIA GeForce 8800 GT
PNP Device ID PCI\VEN_10DE&DEV_0611&SUBSYS_06DC19F1&REV_A2\4&3B252A0E&0&0010
Adapter Type GeForce 8800 GT, NVIDIA compatible
Adapter Description NVIDIA GeForce 8800 GT
Adapter RAM 512.00 MB (536,870,912 bytes)
Installed Drivers nv4_disp.dll
Driver Version 6.14.11.8122
INF File oem2.inf (nv4_G9x section)
Color Planes 1
Color Table Entries 4294967296
Resolution 1440 x 900 x 75 hertz
Bits/Pixel 32
Memory Address 0xFD000000-0xFDFFFFFF
Memory Address 0xC0000000-0xDFFFFFFF
Memory Address 0xFA000000-0xFEAFFFFF
I/O Port 0x0000D800-0x0000D87F
IRQ Channel IRQ 18
I/O Port 0x000003B0-0x000003BB
I/O Port 0x000003C0-0x000003DF
Memory Address 0xA0000-0xBFFFF
Driver c:\windows\system32\drivers\nv4_mini.sys (6.14.11.8122, 6.01 MB (6,301,248 bytes), 12/26/2007 4:35 PM) -
P6N SLI with Geforce 8800 GTS 640 MB won't install Windows
Hi all,
After a reply in the topic for updating your bios.
I was advised to ask the solution for my question here before flashing my Mobo.
My Specs:
Intel Core 2 Duo 6600
4 GB DDR-2 (4 slots)
Geforce 8800 GTS 640 MB PCI-Express
Sitecom WL-171 wireless lan card.
500 GB Hitachi SATA Disk
1 DVD burn/reader
P6N SLI Mainbord with Beta Bios because it wasn't able to use 4 GB Ram at that time.
Zalman 460 Watt
Now the problem
First it was working but with a Geforce 7600 GT 256 PCI-Express.
I have upgraded it today to a 8800 GTS.
After this upgrade my Vista won't boot anymore, same for my Ubuntu.
What is causing the problem?
Is my Powersupply not strong enough or should I flash my bios?
Thanks in advance.
edit: Windows XP 32 or 64 bit. Vista 32 or 64 bit all gave the same stop error: 0x000007e
The knowledge base sais it is a driver problem?
But it isn't even installed.Check VGA power cable too.
"But it looks like it is the Power Supply or the Videocard.
Should this Power Supply succeed? Coolermaster"
look here for good PSU suggestions:
Corsair VX450W:
• ATX 2.2 and ATX 2.01 compatible
• Ultra-quiet 120mm double ball-bearing thermally controlled fan
• High efficiency, up to 85% under a wide load range
• Single +12V rail offers maximum compatibility with latest components
• Supports SATA and PCI-E devices
• High-quality Japanese capacitors
• Active Power Factor Correction (PFC) with PF value of 0.99
• Auto-Switching universal AC input from 90~264V.
• Over Current/Voltage/Power Protection, Under Voltage Protection, and Short Circuit Protection
• Extra long fully-sleeved cables support full size tower chassis
• Standard ATX PS/2 size: 5.9"(W) x 3.4"(H) X 5.5"(L); 50mm(W) x 86mm(H) x
• 5 Year Corsair Warranty
Review: http://www.silentpcreview.com/article751-page1.html
-----> https://www.novatech.co.uk/novatech/specpage.html?CSR-VX450 £39.95
Corsair VX550W:
• Supports the latest ATX12V v2.2 standard and is backwards compatible with ATX12V 2.01 systems.
• Ultra-quiet 120mm double ball-bearing fan delivers excellent airflow at an exceptionally low noise level by varying the RPM in response to temperature.
• Double-forward switching circuitry design offers maximum efficiency, up to 85% under wide load range.
• 99% Active Power Factor Correction provides clean and reliable power to your system.
• Universal AC input 90~264V automatically scans and detects the correct voltage. No more hassle of flipping that tiny red switch!
• Dedicated single +12V rail offers maximum compatibility with latest components.
• Over Current/Voltage/Power Protection, Under Voltage Protection, and Short Circuit Protection provide maximum safety to your critical system components.
• High quality Japanese capacitors provide uncompromised performance and reliability.
• 6 Serial ATA connectors
• Extra long cables support full tower size chassis.
• Standard ATX PS/2 size: 5.9"(W) x 3.4"(H) X 5.5"(L); 150mm(W) x 86mm(H) x 140mm(L)
• MTBF: 100,000 Hours
• Safety Approvals: UL, CUL, CE, CB, FCC Class B, TÜV, CCC, C-tick.
• 5 Year Corsair Warranty
http://www.play.com/PC/PCs/4-/3476852/Corsair-VX-550-PSU-Power-Supply-Unit-550W/Product.html £59.99[/color]
Newest great PSU's Series TX from Corsair:
http://www.corsairmicro.com/products/tx.aspx
650W & 750W Models:
PC Power & Cooling Silencer 610 with 49A on a single +12V rail.
or
PC Power & Cooling Silencer 750 with 60A on a single +12V rail.
Tagan TG480-U01: http://www.scan.co.uk/Products/ProductInfo.asp?WebProductID=82572 http://www.hexus.net/content/item.php?item=694&page=2
ENERMAX Whisper II EG465P-VE FMA(24) 460W (+12V@33A) ---> http://www.avadirect.com/product_details_parts.asp?PRID=1925 approx. $82
ENERMAX EG651P-VE FM(24P) ATX 550W Power Supply (+12V@36A) http://www.enermaxusa.com/catalog/product_info.php?products_id=70 approx. $98
OCZ PowerStream 520W (under rated +12V@33A)---> http://www.ocztechnology.com/products/power_management/ocz_powerstream_power_supply
approx. 110$
Silverstone Zeus ST56ZF 560W (+12V@38A) ---> http://www.silverstonetek.com/products-56zf.htm approx. 110$
Sparkle 550W (EPS) FSP550-60PLG (+12V@36A) --> http://www.sparklepower.com/pdf/FSP550-60PLG.pdf approx. $76
Antec TruePower550W EPS12V (+12V@36A) ---> http://www.antec.com/us/productDetails.php?ProdID=20551 approx. $86
ENERMAX EG651P-VE FM(24P) ATX12V V1.2 550W:
+3.3V@36A; +5V@36A; -5V@1A; +12V@36A; -12V@1A; [email protected]
http://www.newegg.com/Product/Product.asp?Item=N82E16817103437
Good PSU vs Cheap/Unamed/Budget PSU Oscilloscope scan:
Bad PSU:
Quality PSU:
Cheap PSU Codegen 350W:
Enermax 365EG(350W):
What would happen if your PSU can't cope with the load?
* bad 3D performance
* crashing games
* random shutdown
* spontaneous resetting PC
* freezes during gameplay
* PSU overload can cause it to break down
Add-on to read:
PSU's---2 x 12v---The Dual Rail Myth
Is your problem caused by your PSU? -
GeForce 8800 GT Fan running full blast
Hey there folks,
I have a Mac Pro (early 2008, MacPro 3,1) with the OEM Nvidia GeForce 8800 GT graphics card.
Last night when I got home from work I booted up the machine and the fan on the 8800 came on full blast, it has always done this for 3-4 seconds on boot and would then spin down again. The thing is this time it never spun down, it kept going full blast and has ever since. The card is not under heavy load and is cool to the touch. The fan keeps going full speed so long as the machine is on, regardless of activity. Only when it goes to sleep or is shut down does the fan stop.
I've tried resetting the PRAM, resetting the SMC, and even ran Apple Hardware Test and it returned no errors. I have iStat Menus installed but I don't believe it is capable of showing feedback on the card. I haven't been able to find much online about this issue and there are apparently no Mac versions of Nvidia's control and monitoring software for their cards.
I took it into the local Apple store today and the Genius Bar almost immediately told me its a flat-out replacement issue. The machine is out of coverage so ordering a new copy of the same card is expensive ($380). I've looked into other, newer cards like the ATI 5770 or 5870 through Other World Computing and they seem like good options.
Has anyone else come across this problem or know of a workable solution?I replaced the card. At first I took it to the Apple Store but the person there said its basically just a somewhat common hardware failure on the card. Not much to do but repair or replace it.
Rather than spend the time and money to have them diagnose it further just to tell me the same thing I replaced it outright with a card from Other World Computing; the ATI Radeon HD 5770. IT was a good alternative for my machine which, due to it's hardware configuration, has only a few to pick from as viable replacements. It's been working fine so far, no complaints. Just be aware it is a BEAST of a card and puts out a lot of heat. -
My Safari will not load any secure website
Hello Everyone,
Recently my Safari will not load any secure webpage that I try to connect to, i.e.: Google, Gmail, YouTube, PayPal, but Safari will load insecure webpages that I have either bookmarked or that I manually type in their URL. Everytime I try and load one of these secure webpages like Google, i get the error "Safari can't establish a secure connection to the server www.google.com." I have searched through these threads and have tried a few of the remedies suggested, all to no avail. I've reset Safari, I've deleated all plug-ins, I've cleared cashes and history, I've removed all cookies and internet data, I've changed my Mac's dns to Google's 8.8.8.8 // 8.8.4.4, and still no fix. The problem even persists in safemode. Even the webpages I can load take forever to load. Just getting to this forum took nearly 3 hours as every page loaded took roughly 10-15 minutes. I am at a loss as to what could be causing this and how to fix it.
Any help on this would be greatly appreciated.
Thanks.
-Dave
Here are the terminal command code results that I was able to get:
Start time: 20:11:34 06/16/14
Model Identifier: MacBookPro8,2
System Version: OS X 10.9.3 (13D65)
Kernel Version: Darwin 13.2.0
Boot Mode: Normal
Time since boot: 3:11
Diagnostic reports
2014-06-12 securityd crash
2014-06-12 securityd crash
2014-06-13 librariand crash
2014-06-15 PluginProcess crash
2014-06-16 Kernel panic
2014-06-16 ocspd crash
2014-06-16 ocspd crash
2014-06-16 ocspd crash
2014-06-16 ocspd crash
2014-06-16 ocspd crash
2014-06-16 ocspd crash
2014-06-16 ocspd crash
2014-06-16 ocspd crash
2014-06-16 ocspd crash
2014-06-16 ocspd crash
2014-06-16 ocspd crash
2014-06-16 ocspd crash
2014-06-16 ocspd crash
2014-06-16 ocspd crash
2014-06-16 ocspd crash
2014-06-16 ocspd crash
2014-06-16 ocspd crash
2014-06-16 ocspd crash
2014-06-16 ocspd crash
2014-06-16 ocspd crash
Log
Jun 16 20:03:21 disk0s2: I/O error.
Jun 16 20:03:40 disk0s2: I/O error.
Jun 16 20:04:00 disk0s2: I/O error.
Jun 16 20:04:20 disk0s2: I/O error.
Jun 16 20:04:39 disk0s2: I/O error.
Jun 16 20:04:59 disk0s2: I/O error.
Jun 16 20:05:19 disk0s2: I/O error.
Jun 16 20:05:39 disk0s2: I/O error.
Jun 16 20:05:59 disk0s2: I/O error.
Jun 16 20:06:19 disk0s2: I/O error.
Jun 16 20:06:39 disk0s2: I/O error.
Jun 16 20:06:59 disk0s2: I/O error.
Jun 16 20:07:19 disk0s2: I/O error.
Jun 16 20:07:40 disk0s2: I/O error.
Jun 16 20:08:00 disk0s2: I/O error.
Jun 16 20:08:23 disk0s2: I/O error.
Jun 16 20:08:43 disk0s2: I/O error.
Jun 16 20:09:02 disk0s2: I/O error.
Jun 16 20:09:22 disk0s2: I/O error.
Jun 16 20:09:41 disk0s2: I/O error.
Jun 16 20:10:02 disk0s2: I/O error.
Jun 16 20:10:22 disk0s2: I/O error.
Jun 16 20:10:49 disk0s2: I/O error.
Jun 16 20:11:15 disk0s2: I/O error.
Jun 16 20:11:34 disk0s2: I/O error.
kexts
com.apple.driver.AppleIntelMCEReporter (104)
com.apple.driver.AppleIntelHD3000Graphics (8.2.4)
com.apple.iokit.IOBluetoothUSBDFU (4.2.4f1)
com.apple.AMDRadeonX3000 (1.2.2)
launchd
/Library/LaunchAgents/com.razer.rzupdater.plist
(N/A)
/Library/LaunchAgents/com.razerzone.rzdeviceengine.plist
(N/A)
/Library/LaunchDaemons/com.adobe.fpsaud.plist
(N/A)
/Library/LaunchDaemons/com.apple.aelwriter.plist
(N/A)
/Library/LaunchDaemons/com.ea.origin.ESHelper.plist
(N/A)
(N/A)
Library/LaunchAgents/com.divx.agent.postinstall.plist
(N/A)
Library/LaunchAgents/com.spotify.webhelper.plist
(N/A)
Library/LaunchAgents/com.valvesoftware.steamclean.plist
(N/A)
Startup items
/Library/StartupItems/FanControlDaemon/FanControlDaemon
/Library/StartupItems/FanControlDaemon/StartupParameters.plist
Bundles
/System/Library/CoreServices/SecurityAgentPlugins/HomeDirMechanism.bundle
(com.apple.SecurityAgentPlugin.HomeDirMechanism)
/System/Library/CoreServices/SecurityAgentPlugins/KerberosAgent.bundle
(com.apple.KerberosAgent)
/System/Library/CoreServices/SecurityAgentPlugins/loginwindow.bundle
(com.apple.securityAgentPlugins.loginwindowUI)
/System/Library/CoreServices/SecurityAgentPlugins/MCXMechanism.bundle
(com.apple.securityAgentPlugin.MCXMechanism)
/System/Library/CoreServices/SecurityAgentPlugins/PKINITMechanism.bundle
(com.apple.PKINITMechanism)
/System/Library/CoreServices/SecurityAgentPlugins/RestartAuthorization.bundle
(com.apple.securityAgentPlugin.RestartAuthorization)
/System/Library/Extensions/AMDRadeonVADriver.bundle
(N/A)
/System/Library/Extensions/AMDRadeonX3000.kext
(com.apple.AMDRadeonX3000)
/System/Library/Extensions/AMDRadeonX3000GLDriver.bundle
(com.apple.AMDRadeonX3000GLDriver)
/System/Library/Extensions/AMDRadeonX4000.kext
(com.apple.AMDRadeonX4000)
/System/Library/Extensions/AMDRadeonX4000GLDriver.bundle
(com.apple.AMDRadeonX4000GLDriver)
/System/Library/Extensions/AppleIntelHD3000Graphics.kext
(com.apple.driver.AppleIntelHD3000Graphics)
/System/Library/Extensions/AppleIntelHD3000GraphicsGA.plugin
(com.apple.driver.AppleIntelHD3000GraphicsGA)
/System/Library/Extensions/AppleIntelHD3000GraphicsGLDriver.bundle
(com.apple.driver.AppleIntelHD3000GraphicsGLDriver)
/System/Library/Extensions/AppleIntelHD3000GraphicsVADriver.bundle
(com.apple.AppleIntelHD3000GraphicsVADriver)
/System/Library/Extensions/AppleIntelHD4000Graphics.kext
(com.apple.driver.AppleIntelHD4000Graphics)
/System/Library/Extensions/AppleIntelHD4000GraphicsGLDriver.bundle
(com.apple.driver.AppleIntelHD4000GraphicsGLDriver)
/System/Library/Extensions/AppleIntelHD4000GraphicsVADriver.bundle
(com.apple.AppleIntelHD4000GraphicsVADriver)
/System/Library/Extensions/AppleIntelHD5000Graphics.kext
(com.apple.driver.AppleIntelHD5000Graphics)
/System/Library/Extensions/AppleIntelHD5000GraphicsGLDriver.bundle
(com.apple.driver.AppleIntelHD5000GraphicsGLDriver)
/System/Library/Extensions/AppleIntelHD5000GraphicsVADriver.bundle
(com.apple.AppleIntelHD5000GraphicsVADriver)
/System/Library/Extensions/AppleIntelHDGraphicsGLDriver.bundle
(com.apple.driver.AppleIntelHDGraphicsGLDriver)
/System/Library/Extensions/AppleIntelHSWVA.bundle
(com.apple.AppleIntelHSWFBVA)
/System/Library/Extensions/AppleIntelIVBVA.bundle
(com.apple.AppleIntelIVBFBVA)
/System/Library/Extensions/AppleIntelMCEReporter.kext
(com.apple.driver.AppleIntelMCEReporter)
/System/Library/Extensions/ATIRadeonX2000.kext
(com.apple.ATIRadeonX2000)
/System/Library/Extensions/ATIRadeonX2000GA.plugin
(com.apple.ATIRadeonX2000GA)
/System/Library/Extensions/ATIRadeonX2000GLDriver.bundle
(com.apple.ATIRadeonX2000GLDriver)
/System/Library/Extensions/ATIRadeonX2000VADriver.bundle
(com.apple.ATIRadeonX2000VADriver)
/System/Library/Extensions/EPSONUSBPrintClass.kext
(com.epson.print.kext.USBPrintClass)
/System/Library/Extensions/GeForce.kext
(com.apple.GeForce)
/System/Library/Extensions/GeForceGA.plugin
(com.apple.GeForceGA)
/System/Library/Extensions/GeForceGLDriver.bundle
(com.apple.GeForceGLDriver)
/System/Library/Extensions/GeForceTesla.kext
(com.apple.GeForceTesla)
/System/Library/Extensions/GeForceTeslaGLDriver.bundle
(com.apple.GeForceTeslaGLDriver)
/System/Library/Extensions/GeForceTeslaVADriver.bundle
(com.apple.GeForceTeslaVADriver)
/System/Library/Extensions/GeForceVADriver.bundle
(com.apple.GeForceVADriver)
/System/Library/Extensions/hp_designjet_series.kext
(com.hp.print.hpio.Designjet.kext)
/System/Library/Extensions/hp_Deskjet_io_enabler.kext
(com.hp.print.hpio.Deskjet.kext)
/System/Library/Extensions/hp_fax_io.kext
(com.hp.kext.hp-fax-io)
/System/Library/Extensions/hp_Inkjet1_io_enabler.kext
(com.hp.print.hpio.Inkjet1.kext)
/System/Library/Extensions/hp_Inkjet2_io_enabler.kext
(com.hp.print.hpio.Inkjet2.kext)
/System/Library/Extensions/hp_Inkjet3_io_enabler.kext
(com.hp.print.hpio.Inkjet3.kext)
/System/Library/Extensions/hp_Inkjet4_io_enabler.kext
(com.hp.print.hpio.Inkjet4.kext)
/System/Library/Extensions/hp_Inkjet5_io_enabler.kext
(com.hp.print.hpio.Inkjet5.kext)
/System/Library/Extensions/hp_Inkjet7_io_enabler.kext
(com.hp.print.hpio.inkjet7.kext)
/System/Library/Extensions/hp_Inkjet8_io_enabler.kext
(com.hp.print.hpio.inkjet8.kext)
/System/Library/Extensions/hp_Inkjet9_io_enabler.kext
(com.hp.print.hpio.Inkjet9.kext)
/System/Library/Extensions/hp_Inkjet_io_enabler.kext
(com.hp.print.hpio.Inkjet.kext)
/System/Library/Extensions/hp_io_printerclassdriver_enabler.kext
(com.hp.hpio.hp_io_printerclassdriver_enabler)
/System/Library/Extensions/hp_Laserjet_io_enabler.kext
(com.hp.print.hpio.Laserjet.kext)
/System/Library/Extensions/hp_Officejet_io_enabler.kext
(com.hp.print.hpio.Officejet.kext)
/System/Library/Extensions/hp_Photosmart_io_enabler.kext
(com.hp.print.hpio.Photosmart.kext)
/System/Library/Extensions/hp_PhotosmartPro_io_enabler.kext
(com.hp.print.hpio.PhotosmartPro.kext)
/System/Library/Extensions/hp_psa640_io_enabler.kext
(com.hp.hpio.hp_psa640_io_enabler)
/System/Library/Extensions/hp_qc_io_enabler.kext
(com.hp.hpio.hp_psa530_630_io_enabler)
/System/Library/Extensions/RazerHid.kext
(com.razer.common.razerhid)
/Library/Audio/MIDI Drivers/EmagicUSBMIDIDriver.plugin
(info.emagic.driver.unitor)
/Library/Audio/Plug-Ins/HAL/AirPlay.driver
(com.apple.audio.AirTunesHALPlugin)
/Library/Audio/Plug-Ins/HAL/AppleAVBAudio.driver
(com.apple.audio.AppleAVBAudio)
/Library/Audio/Plug-Ins/HAL/BluetoothAudioPlugIn.driver
(com.apple.audio.BluetoothAudioPlugIn)
/Library/Audio/Plug-Ins/HAL/iSightAudio.driver
(com.apple.iSightAudio)
/Library/Internet Plug-Ins/Default Browser.plugin
(com.apple.DefaultBrowser.PlugIn)
/Library/Internet Plug-Ins/DivXBrowserPlugin.plugin
(com.divx.DivXBrowserPlugin)
/Library/Internet Plug-Ins/Flash Player.plugin
(N/A)
/Library/Internet Plug-Ins/Flip4Mac WMV Plugin.plugin
(net.telestream.wmv.plugin)
/Library/Internet Plug-Ins/Flip4Mac WMV Plugin.webplugin
(net.telestream.wmv.webplugin)
/Library/Internet Plug-Ins/iPhotoPhotocast.plugin
(com.apple.plugin.iPhotoPhotocast)
/Library/Internet Plug-Ins/JavaAppletPlugin.plugin
(com.apple.java.JavaAppletPlugin)
/Library/Internet Plug-Ins/OVSHelper.plugin
(com.divx.OVSHelper)
/Library/Internet Plug-Ins/Quartz Composer.webplugin
(com.apple.QuartzComposer.webplugin)
/Library/Internet Plug-Ins/QuickTime Plugin.plugin
(N/A)
/Library/Internet Plug-Ins/Silverlight.plugin
(com.microsoft.SilverlightPlugin)
/Library/Internet Plug-Ins/Unity Web Player.plugin
(com.unity.UnityWebPlayer)
/Library/iTunes/iTunes Plug-ins/Quartz Composer Visualizer.bundle
(com.apple.QuartzComposer.iTunesPlugIn)
/Library/PreferencePanes/DivX.prefPane
(com.divx.divxprefs)
/Library/PreferencePanes/Fan Control.prefPane
(com.lobotomo.FanControl)
/Library/PreferencePanes/Flash Player.prefPane
(com.adobe.flashplayerpreferences)
/Library/QuickTime/AppleMPEG2Codec.component
(com.apple.AppleMPEG2Codec)
/Library/Spotlight/iBooksAuthor.mdimporter
(com.apple.MDImporter.iBooksAuthor)
/Library/Spotlight/iWork.mdimporter
(com.apple.MDImporter.iWork)
/Library/Spotlight/Microsoft Office.mdimporter
(com.microsoft.MDImporter.Office)
Library/Address Book Plug-Ins/SkypeABDialer.bundle
(com.skype.skypeabdialer)
Library/Address Book Plug-Ins/SkypeABSMS.bundle
(com.skype.skypeabsms)
Library/Caches/com.apple.Safari/Extensions/DivXHTML5.safairextension
(com.divx.DivXHTML5)
Library/Widgets/TWCi.wdgt
(com.weather.widget.Forecast)
dylibs
/usr/lib/dtrace/libdtrace_dyld.dylib
/usr/lib/libgmalloc.B.dylib
/usr/lib/libruby.2.0.0.dylib
/usr/lib/libXplugin.1.dylib
Font issues: 8
DNS: 8.8.8.8 (static)
Wi-Fi
link auth: none
Restricted files: 56
Safari extensions
DivXHTML5
Widgets
TWCi
Elapsed time (s): 1905You may have more than one issue, but the most important one is that your internal hard drive is failing, or there is some other hardware fault.
Back up all data on the drive immediately if you don't already have a current backup. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed. -
IPhoto Will not Load even after reinstall
All of a sudden, iphoto will not load....I receive this error:
Iphoto cannot be loaded because of a problem.
Check with the developer to make sure that iphoto works with this version of Mac OS X. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OS X.
I reinstalled iphoto from the disk (so now I have iphoto and iphone (original) .....i reboot and then try to access the new iphoto....same error. iphoto library appears ok. I can still attach a pic via "photo browser" button in email.
Details are below:
Process: iPhoto [240]
Path: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier: com.apple.iPhoto
Version: ??? (???)
Build Info: iPhotoProject-4750000~1
Code Type: X86 (Native)
Parent Process: launchd [148]
Date/Time: 2012-03-13 21:32:11.581 -0400
OS Version: Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report: 91733 sec
Crashes Since Last Report: 9
Per-App Crashes Since Last Report: 9
Anonymous UUID: 3B8356D3-F2A7-4D47-8AA0-E7754B24F8F4
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /Library/Frameworks/iLifePageLayout.framework/Versions/A/iLifePageLayout
Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Reason: image not found
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <A4F6ADCC-6448-37B4-ED6C-ABB2CD06F448> /usr/lib/dyld
Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i7, 2.66 GHz, 4 GB, SMC 1.58f15
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HTS545050B9SA02, 465.76 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0236, 0xfa120000 / 5
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfa130000 / 4
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 3
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0xfa113000 / 7
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0xfd110000 / 3ok, I trashed all of the receipts related to iphoto (once i knew to search on "iphoto receipts" this is what everyone said). I relaoded from the ilife '11 disk.....tried to load iphoto and got what you see below...same exact issue.
Process: iPhoto [3516]
Path: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier: com.apple.iPhoto
Version: ??? (???)
Build Info: iPhotoProject-4750000~1
Code Type: X86 (Native)
Parent Process: launchd [148]
Date/Time: 2012-03-15 19:31:40.175 -0400
OS Version: Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report: 175963 sec
Crashes Since Last Report: 29
Per-App Crashes Since Last Report: 14
Anonymous UUID: 3B8356D3-F2A7-4D47-8AA0-E7754B24F8F4
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /Library/Frameworks/iLifePageLayout.framework/Versions/A/iLifePageLayout
Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Reason: image not found
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <A4F6ADCC-6448-37B4-ED6C-ABB2CD06F448> /usr/lib/dyld
Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i7, 2.66 GHz, 4 GB, SMC 1.58f15
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HTS545050B9SA02, 465.76 GB
Serial ATA Device: MATSHITADVD-R UJ-898, 3.5 GB
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0236, 0xfa120000 / 5
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfa130000 / 4
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 3
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0xfa113000 / 7
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: Composite Device, 0x0461 (Primax Electronics), 0x4d03, 0xfd130000 / 5
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0xfd110000 / 3 -
Process: iTunes [1180]
Path: /Applications/iTunes.app/Contents/MacOS/iTunes
Identifier: com.apple.iTunes
Version: ??? (???)
Code Type: X86 (Native)
Parent Process: launchd [128]
Date/Time: 2011-10-15 14:03:26.959 -0500
OS Version: Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report: 173475 sec
Crashes Since Last Report: 17
Per-App Crashes Since Last Report: 14
Anonymous UUID: FBE53514-43A0-44F2-8224-C1544A10966F
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: @loader_path/libgnsdk_dsp.1.9.1.dylib
Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
Reason: image not found
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <A4F6ADCC-6448-37B4-ED6C-ABB2CD06F448> /usr/lib/dyld
Model: MacBookPro5,3, BootROM MBP53.00AC.B03, 2 processors, Intel Core 2 Duo, 2.8 GHz, 4 GB, SMC 1.48f2
Graphics: NVIDIA GeForce 9600M GT, NVIDIA GeForce 9600M GT, PCIe, 512 MB
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: TOSHIBA MK5055GSXF, 465.76 GB
Serial ATA Device: HL-DT-ST DVDRW GS23N
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0x24400000 / 2
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0x26500000 / 2
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0236, 0x04600000 / 3
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8213, 0x06110000 / 3
WHAT IS THIS?????????Hi kitmaguire,
If you are receiving an "audio configuration" error message in iTunes on your Windows machine, you may find the following article helpful:
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/ts1371
Regards,
- Brenden -
This problem is present since about the release of 4.11 of KDE. Howerver usually 1 reboot is enough, and everything works fine again.
But today i had to restart my system 5x till finally everything is working fine.
The Problem: KDE loads only the network-applet on the systray (kmix and clipper are not visible) and it takes around 10 seconds till i can launch the kickoff-menu. After that i get a warning about my one autostart-programm, which is obviously running, and if i really want to try to run in twice. (Btw, if i choose no, then it is not loaded, which is kind of strange too). I am not able to use the reboot/shutdown option in the kickoff-menu. Dolphin or other apps seems to load fine. Only solution for me so far is to reboot the system.
Here is the output of .xsession-errors
startkde: Starting up...
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
kbuildsycoca4 running...
kbuildsycoca4(565) KBuildSycoca::checkTimestamps: checking file timestamps
kbuildsycoca4(565) KBuildSycoca::checkTimestamps: timestamps check ok
kbuildsycoca4(565) kdemain: Emitting notifyDatabaseChanged ()
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
NetworkManagerQt "kded" ( 564 ) void NetworkManager::SettingsPrivate::init() : New Connections list
NetworkManagerQt "kded" ( 564 ) void NetworkManager::SettingsPrivate::init() : "/org/freedesktop/NetworkManager/Settings/0"
NetworkManagerQt "kded" ( 564 ) void NetworkManager::SettingsPrivate::init() : New Connections list
NetworkManagerQt "kded" ( 564 ) void NetworkManager::NetworkManagerPrivate::init() : Active connections:
NetworkManagerQt "kded" ( 564 ) void NetworkManager::NetworkManagerPrivate::init() : "/org/freedesktop/NetworkManager/ActiveConnection/0"
NetworkManagerQt "kded" ( 564 ) void NetworkManager::NetworkManagerPrivate::init() : Device list
NetworkManagerQt "kded" ( 564 ) void NetworkManager::NetworkManagerPrivate::init() : "/org/freedesktop/NetworkManager/Devices/0"
ModemManagerQt "kded" ( 564 ) void ModemManager::ModemManagerPrivate::init() : Error getting device list: "org.freedesktop.DBus.Error.ServiceUnknown" : "The name org.freedesktop.ModemManager was not provided by any .service files"
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: name 'org.kde.kglobalaccel' had owner '' but we thought it was ':1.8'
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "Drive" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d4" : property "Name" does not exist
"/" : property "DeviceNumber" does not exist
"/" : property "Device" does not exist
"/" : property "MediaCompatibility" does not exist
"/" : property "MediaRemovable" does not exist
"/" : property "Removable" does not exist
"/" : property "ConnectionBus" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d3" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d2" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d1" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d0" : property "Name" does not exist
kded(564)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
QDBusConnection: name 'org.freedesktop.UDisks2' had owner '' but we thought it was ':1.18'
kded(564) PowerDevil::Core::loadProfile: The profile "AC" tried to activate "DimDisplay" a non existent action. This is usually due to an installation problem or to a configuration problem. or simlpy the action is not supported
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce GTS 450/PCIe/SSE2
OpenGL version string: 4.3.0 NVIDIA 325.15
OpenGL shading language version string: 4.30 NVIDIA via Cg compiler
Driver: NVIDIA
Driver version: 325.15
GPU class: GF100
OpenGL version: 4.3
GLSL version: 4.30
X server version: 1.14.3
Linux kernel version: 3.11.6
Direct rendering: yes
Requires strict binding: no
GLSL shaders: yes
Texture NPOT support: yes
Virtual Machine: no
QDBusObjectPath: invalid path ""
QDBusObjectPath: invalid path ""
plasma-desktop(631)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(631)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(631)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(631)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(631)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(631)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(631)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
QGraphicsLinearLayout::insertItem: cannot insert null item
========================> 4 0
static bool QDeclarativeMetaType::isModule(const QByteArray&, int, int) Qt 4.7 import detected; please note that Qt 4.7 is directly reusable as QtQuick 1.x with no code changes. Continuing, but startup time will be slower.
plasma-desktop(631)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
plasma-desktop(631)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
plasma-desktop(631)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "DeviceNumber" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "Device" does not exist
file:///usr/lib/kde4/imports/org/kde/plasma/components/SectionScroller.qml:103: TypeError: Result of expression 'listView' [null] is not an object.
file:///usr/lib/kde4/imports/org/kde/plasma/components/SectionScroller.qml:175: ReferenceError: Can't find variable: sectionsRepeater
file:///usr/lib/kde4/imports/org/kde/plasma/components/SectionScroller.qml:103: Error: Cannot assign [undefined] to QString
file:///usr/share/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_55: Bei der Fülloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_55: Bei der Fülloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_55: Bei der Fülloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_55: Bei der Fülloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_55: Bei der Fülloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_55: Bei der Fülloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_55: Bei der Fülloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
link XMLID_34_ hasn't been detected!
link XMLID_34_ hasn't been detected!
link XMLID_36_ hasn't been detected!
NetworkManagerQt "plasma-desktop" ( 631 ) void NetworkManager::SettingsPrivate::init() : New Connections list
NetworkManagerQt "plasma-desktop" ( 631 ) void NetworkManager::SettingsPrivate::init() : "/org/freedesktop/NetworkManager/Settings/0"
NetworkManagerQt "plasma-desktop" ( 631 ) void NetworkManager::SettingsPrivate::init() : New Connections list
NetworkManagerQt "plasma-desktop" ( 631 ) void NetworkManager::NetworkManagerPrivate::init() : Active connections:
NetworkManagerQt "plasma-desktop" ( 631 ) void NetworkManager::NetworkManagerPrivate::init() : "/org/freedesktop/NetworkManager/ActiveConnection/0"
NetworkManagerQt "plasma-desktop" ( 631 ) void NetworkManager::NetworkManagerPrivate::init() : Device list
NetworkManagerQt "plasma-desktop" ( 631 ) void NetworkManager::NetworkManagerPrivate::init() : "/org/freedesktop/NetworkManager/Devices/0"
file:///usr/share/apps/plasma/plasmoids/org.kde.networkmanagement/contents/ui/main.qml:91:9: QML QDeclarativeListView_QML_127: Bei der Fülloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/org.kde.networkmanagement/contents/ui/main.qml:91:9: QML QDeclarativeListView_QML_127: Bei der Fülloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/org.kde.networkmanagement/contents/ui/main.qml:91:9: QML QDeclarativeListView_QML_127: Bei der Fülloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/org.kde.networkmanagement/contents/ui/main.qml:91:9: QML QDeclarativeListView_QML_127: Bei der Fülloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/org.kde.networkmanagement/contents/ui/main.qml:91:9: QML QDeclarativeListView_QML_127: Bei der Fülloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/org.kde.networkmanagement/contents/ui/main.qml:91:9: QML QDeclarativeListView_QML_127: Bei der Fülloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/org.kde.networkmanagement/contents/ui/main.qml:91:9: QML QDeclarativeListView_QML_127: Bei der Fülloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
plasma-desktop(631)/libakonadi Akonadi::AgentManagerPrivate::createDBusInterface: AgentManager failed to get a valid AgentManager DBus interface. Error is: 1 "org.freedesktop.DBus.Error.NameHasNoOwner" "Could not get owner of name 'org.freedesktop.Akonadi.Control': no such name"
plasma-desktop(631)/libakonadi Akonadi::SessionPrivate::socketError: Socket error occurred: "QLocalSocket::connectToServer: Invalid name"
plasma-desktop(631)/libakonadi Akonadi::SessionPrivate::socketError: Socket error occurred: "QLocalSocket::connectToServer: Invalid name"
search paths: ("/usr/local/bin", "/usr/local/sbin", "/usr/local/bin", "/usr/bin", "/usr/bin/core_perl", "/usr/sbin", "/usr/local/sbin", "/usr/local/libexec", "/usr/libexec", "/opt/mysql/libexec", "/opt/local/lib/mysql5/bin", "/opt/mysql/sbin")
"/org/freedesktop/UDisks2/block_devices/dm_2d0" : property "Name" does not exist
"/" : property "DeviceNumber" does not exist
"/" : property "Device" does not exist
"/" : property "MediaCompatibility" does not exist
"/" : property "MediaRemovable" does not exist
"/" : property "Removable" does not exist
"/" : property "ConnectionBus" does not exist
"/" : property "Vendor" does not exist
"/" : property "Model" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "DeviceNumber" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "Device" does not exist
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "DeviceNumber" does not exist
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "Device" does not exist
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e000f2
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0x238f5d8
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 139 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e000f2
X Error: RenderBadPicture (invalid Picture parameter) 143
Extension: 139 (RENDER)
Minor opcode: 8 (RenderComposite)
Resource id: 0x1e000f2
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e000f4
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0x238f5d8
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 139 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e000f4
X Error: RenderBadPicture (invalid Picture parameter) 143
Extension: 139 (RENDER)
Minor opcode: 8 (RenderComposite)
Resource id: 0x1e000f4
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e000f6
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0x238f5d8
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 139 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e000f6
X Error: RenderBadPicture (invalid Picture parameter) 143
Extension: 139 (RENDER)
Minor opcode: 8 (RenderComposite)
Resource id: 0x1e000f6
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e000f8
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0x238f5d8
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 139 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e000f8
X Error: RenderBadPicture (invalid Picture parameter) 143
Extension: 139 (RENDER)
Minor opcode: 8 (RenderComposite)
Resource id: 0x1e000f8
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e000fa
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0x238f5d8
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 139 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e000fa
X Error: RenderBadPicture (invalid Picture parameter) 143
Extension: 139 (RENDER)
Minor opcode: 8 (RenderComposite)
Resource id: 0x1e000fa
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e000fc
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0x238f5d8
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 139 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e000fc
X Error: RenderBadPicture (invalid Picture parameter) 143
Extension: 139 (RENDER)
Minor opcode: 8 (RenderComposite)
Resource id: 0x1e000fc
link XMLID_34_ hasn't been detected!
link XMLID_34_ hasn't been detected!
link XMLID_36_ hasn't been detected!
"/org/freedesktop/UDisks2/block_devices/dm_2d1" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d2" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d3" : property "Name" does not exist
plasma-desktop(631) KSambaSharePrivate::findSmbConf: KSambaShare: Could not find smb.conf!
"/org/freedesktop/UDisks2/block_devices/dm_2d4" : property "Name" does not exist
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "DeviceNumber" does not exist
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "Device" does not exist
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
N: [pulseaudio] main.c: User-configured server at {1da04571ceeb43369c6b10f2742a25c9}unix:/run/user/1000/pulse/native, which appears to be local. Probing deeper.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
akonadi.collectionattributetable OK
akonadi.collectionmimetyperelation OK
akonadi.collectionpimitemrelation OK
akonadi.collectiontable OK
akonadi.flagtable OK
akonadi.mimetypetable OK
akonadi.parttable OK
akonadi.pimitemflagrelation OK
akonadi.pimitemtable OK
akonadi.resourcetable OK
akonadi.schemaversiontable OK
Nepomuk Query Server not available
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
search paths: ("/usr/local/bin", "/usr/local/sbin", "/usr/local/bin", "/usr/bin", "/usr/bin/core_perl")
ksmserver(613): Couldn't start knotify from knotify4.desktop: "Fehler bei der Ausführung von „knotify4.desktop“. Entweder läuft KLauncher nicht mehr, oder die Anwendung kann nicht gestartet werden."
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
search paths: ("/home/tumas/.kde4/lib/kde4/plugins/", "/usr/lib/kde4/plugins/", "/usr/lib/qt4/plugins", "/usr/bin", "/usr/lib/kde4/plugins", "/home/tumas/.kde4/lib/kde4/", "/usr/lib/kde4/")
search paths: ("/home/tumas/.kde4/lib/kde4/plugins/", "/usr/lib/kde4/plugins/", "/usr/lib/qt4/plugins", "/usr/bin", "/usr/lib/kde4/plugins", "/home/tumas/.kde4/lib/kde4/", "/usr/lib/kde4/")
search paths: ("/home/tumas/.kde4/lib/kde4/plugins/", "/usr/lib/kde4/plugins/", "/usr/lib/qt4/plugins", "/usr/bin", "/usr/lib/kde4/plugins", "/home/tumas/.kde4/lib/kde4/", "/usr/lib/kde4/")
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
New PolkitAgentListener 0x1200220
Adding new listener PolkitQt1::Agent::Listener(0x145d2e0) for 0x1200220
yakuake(666)/kdecore (KLibrary) findLibraryInternal: plugins should not have a 'lib' prefix: "libkonsolepart.so"
yakuake(666)/konsole Konsole::Session::run: Attempted to re-run an already running session.
krunner(659)/kio (KDirWatch) KDirWatchPrivate::removeEntry: doesn't know "/home/tumas/.kde4/share/apps/kabc"
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "DeviceNumber" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "Device" does not exist
I/O warning : failed to load external entity "/home/tumas/.qalculate/eurofxref-daily.xml"
I/O warning : failed to load external entity "/home/tumas/.qalculate/eurofxref-daily.xml"
"/org/freedesktop/UDisks2/block_devices/dm_2d0" : property "Name" does not exist
"/" : property "DeviceNumber" does not exist
"/" : property "Device" does not exist
"/" : property "MediaCompatibility" does not exist
"/" : property "MediaRemovable" does not exist
"/" : property "Removable" does not exist
"/" : property "ConnectionBus" does not exist
"/" : property "Vendor" does not exist
"/" : property "Model" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "DeviceNumber" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "Device" does not exist
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "DeviceNumber" does not exist
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "Device" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d1" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d2" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d3" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d4" : property "Name" does not exist
akonadi_nepomuk_feeder(711) FeederPluginloader::feederPluginsForMimeType: No feeder for type "text/calendar" found
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "Drive" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d0" : property "Name" does not exist
"/" : property "DeviceNumber" does not exist
"/" : property "Device" does not exist
"/" : property "MediaCompatibility" does not exist
"/" : property "MediaRemovable" does not exist
"/" : property "Removable" does not exist
"/" : property "ConnectionBus" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d1" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d2" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d3" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d4" : property "Name" does not exist
QPixmap::scaled: Pixmap is a null pixmap
QPixmap::scaled: Pixmap is a null pixmap
QPixmap::scaled: Pixmap is a null pixmap
dolphin(802) KSambaSharePrivate::findSmbConf: KSambaShare: Could not find smb.conf!
dolphin(802)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
kwin(623) KWin::GlxBackend::present:
It seems you are using the nvidia driver without triple buffering
You must export __GL_YIELD="USLEEP" to prevent large CPU overhead on synced swaps
Preferably, enable the TripleBuffer Option in the xorg.conf Device
For this reason, the tearing prevention has been disabled.
See https://bugs.kde.org/show_bug.cgi?id=322060
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
kate(814)/kate-filetree KateFileTreePluginView::KateFileTreePluginView: BEGIN: mw: Kate::MainWindow(0x1da8200)
kate(814)/kate-filetree ProxyItem::ProxyItem: ProxyItem(0x2146e90,0x0,-1,QObject(0x0) ,"m_root")
kate(814)/kate-filetree ProxyItem::ProxyItem: ProxyItem(0x2147550,0x0,-1,QObject(0x0) ,"Unbenannt")
kate(814)/kate-filetree KateFileTreeModel::documentOpened: before add: ProxyItem(0x2147550,0x0,-1,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeModel::setupIcon: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::setupIcon: END!
kate(814)/kate-filetree KateFileTreeModel::handleInsert: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::handleInsert: empty item
kate(814)/kate-filetree ProxyItem::addChild: added ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" ) to ProxyItemDir(0x2146e90,0x0,-1,"m_root", children:1)
kate(814)/kate-filetree KateFileTreeModel::documentOpened: after add: ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeProxyModel::KateFileTreeProxyModel: BEGIN!
kate(814)/kate-filetree KateFileTreePluginView::setListMode: BEGIN
kate(814)/kate-filetree KateFileTreePluginView::setListMode: treeMode
kate(814)/kate-filetree KateFileTreePluginView::setListMode: END
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: BEGIN!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: BEGIN!
kate(814)/kate-filetree KateFileTreeProxyModel::docIndex: !
kate(814)/kate-filetree KateFileTreeModel::docIndex: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::docIndex: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: selected doc= KateDocument(0x1fd9630) QModelIndex(0,0,0x2147270,KateFileTreeProxyModel(0x1a75410) )
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: display= "Unbenannt"
kate(814)/kate-filetree KateFileTreeModel::documentActivated: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: adding viewHistory ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: m_editHistory contains 0 elements
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: END!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: END!
kate(814)/kate-filetree KateFileTree::slotCurrentChanged: current: QModelIndex(0,0,0x2147270,KateFileTreeProxyModel(0x1a75410) ) previous: QModelIndex(-1,-1,0x0,QObject(0x0) )
kate(814)/kate-filetree KateFileTree::slotCurrentChanged: got doc, setting prev: QModelIndex(0,0,0x2147270,KateFileTreeProxyModel(0x1a75410) )
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: END!
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: change to unnamed item
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: "Unbenannt" -> "Unbenannt"
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: removing brush ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: removing/replacing view history ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeModel::handleNameChange: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::handleNameChange: bogus name change
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: BEGIN!
kate(814)/kate-filetree KateFileTreeProxyModel::docIndex: !
kate(814)/kate-filetree KateFileTreeModel::docIndex: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::docIndex: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: selected doc= KateDocument(0x1fd9630) QModelIndex(0,0,0x2147270,KateFileTreeProxyModel(0x1a75410) )
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: display= "Unbenannt"
kate(814)/kate-filetree KateFileTreeModel::documentActivated: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: adding viewHistory ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: m_editHistory contains 0 elements
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: END!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: END!
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: END!
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: "Unbenannt" -> "/home/tumas/.xsession-errors"
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: removing brush ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: removing/replacing view history ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeModel::handleNameChange: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::handleNameChange: removing ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" ) from ProxyItemDir(0x2146e90,0x0,-1,"m_root", children:1)
kate(814)/kate-filetree KateFileTree::slotCurrentChanged: current: QModelIndex(-1,-1,0x0,QObject(0x0) ) previous: QModelIndex(0,0,0x2147270,KateFileTreeProxyModel(0x1a75410) )
kate(814)/kate-filetree ProxyItem::remChild: remove ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" ) from ProxyItemDir(0x2146e90,0x0,-1,"m_root", children:1)
kate(814)/kate-filetree KateFileTreeModel::handleEmptyParents: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::handleEmptyParents: parent ProxyItemDir(0x2146e90,0x0,-1,"m_root", children:0) grandparentProxyItemDir(0x0)
kate(814)/kate-filetree KateFileTreeModel::setupIcon: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::setupIcon: END!
kate(814)/kate-filetree KateFileTreeModel::handleNameChange: inserting ProxyItem(0x2147550,0x0,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" )
kate(814)/kate-filetree KateFileTreeModel::handleInsert: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::handleInsert: creating a new root
kate(814)/kate-filetree ProxyItem::ProxyItem: ProxyItem(0x25aa840,0x0,-1,QObject(0x0) ,"/home/tumas")
kate(814)/kate-filetree KateFileTreeModel::handleInsert: add ProxyItemDir(0x25aa840,0x0,-1,"/home/tumas", children:0) to m_root
kate(814)/kate-filetree ProxyItem::addChild: added ProxyItem(0x25aa840,0x2146e90,0,QObject(0x0) ,"/home/tumas") toProxyItemDir(0x2146e90,0x0,-1,"m_root", children:1)
kate(814)/kate-filetree KateFileTreeModel::handleInsert: attempting to merge some existing roots
kate(814)/kate-filetree KateFileTreeModel::handleInsert: adding ProxyItem(0x2147550,0x0,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" ) to ProxyItemDir(0x25aa840,0x2146e90,0,"/home/tumas", children:0)
kate(814)/kate-filetree ProxyItem::addChild: added ProxyItem(0x2147550,0x25aa840,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" ) to ProxyItemDir(0x25aa840,0x2146e90,0,"/home/tumas", children:1)
kate(814)/kate-filetree KateFileTreeModel::handleInsert: END!
kate(814)/kate-filetree KateFileTreeModel::handleNameChange: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: BEGIN!
kate(814)/kate-filetree KateFileTreeProxyModel::docIndex: !
kate(814)/kate-filetree KateFileTreeModel::docIndex: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::docIndex: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: selected doc= KateDocument(0x1fd9630) QModelIndex(0,0,0x2596910,KateFileTreeProxyModel(0x1a75410) )
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: display= ".xsession-errors"
kate(814)/kate-filetree KateFileTreeModel::documentActivated: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: adding viewHistory ProxyItem(0x2147550,0x25aa840,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" )
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: m_editHistory contains 0 elements
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: END!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: END!
kate(814)/kate-filetree KateFileTree::slotCurrentChanged: current: QModelIndex(0,0,0x2596910,KateFileTreeProxyModel(0x1a75410) ) previous: QModelIndex(-1,-1,0x0,QObject(0x0) )
kate(814)/kate-filetree KateFileTree::slotCurrentChanged: got doc, setting prev: QModelIndex(0,0,0x2596910,KateFileTreeProxyModel(0x1a75410) )
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: END!
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: END!
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: ProxyItem(0x2147550,0x25aa840,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" )
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: ".xsession-errors" -> "/home/tumas/.xsession-errors"
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: removing brush ProxyItem(0x2147550,0x25aa840,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" )
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: removing/replacing view history ProxyItem(0x2147550,0x25aa840,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" )
kate(814)/kate-filetree KateFileTreeModel::handleNameChange: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::handleNameChange: bogus name change
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: BEGIN!
kate(814)/kate-filetree KateFileTreeProxyModel::docIndex: !
kate(814)/kate-filetree KateFileTreeModel::docIndex: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::docIndex: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: selected doc= KateDocument(0x1fd9630) QModelIndex(0,0,0x2596910,KateFileTreeProxyModel(0x1a75410) )
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: display= ".xsession-errors"
kate(814)/kate-filetree KateFileTreeModel::documentActivated: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: adding viewHistory ProxyItem(0x2147550,0x25aa840,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" )
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: m_editHistory contains 0 elements
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: END!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: END!
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: BEGIN!
kate(814)/kate-filetree KateFileTreeProxyModel::docIndex: !
kate(814)/kate-filetree KateFileTreeModel::docIndex: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::docIndex: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: selected doc= KateDocument(0x1fd9630) QModelIndex(0,0,0x2596910,KateFileTreeProxyModel(0x1a75410) )
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: display= ".xsession-errors"
kate(814)/kate-filetree KateFileTreeModel::documentActivated: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: adding viewHistory ProxyItem(0x2147550,0x25aa840,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" )
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: m_editHistory contains 0 elements
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: END!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: END!
kate(814)/kate-filetree KateFileTreePluginSettings::save: save config!
dolphin(802)/kdecore (KLibrary) findLibraryInternal: plugins should not have a 'lib' prefix: "libkonsolepart.so"
dolphin(802)/konsole Konsole::Session::run: Attempted to re-run an already running session.
PS: The system is only 2 days old and there were no strange updates or any unusual settings/apps installed.
Last edited by tumas (2013-10-27 07:42:44)Thaodan wrote:Can you write /var/tmp/kdecache-$USER?
What exactly do u mean? There are a few folders/files inside. -
Hello,
After trying to change my printer settings on CUPS administrator area to allow to share my wirelless printer to my VirtualBox environment (somehow virtualbox doesn't detect my wirelless printer) I notice that this area stop to work. After it I try to update the CUPS by installing a new version. I admint that I am a newby in unix environment and I downloaded the CUPS v1.6.1 and installed through the terminal,
./configure
sudo make
make install
After restarting apple site no longer opened like also my home page. Other programs also stopped working and always warn about the same error described bellow. I posted my last try which was reinstall my system Snow Leopard (Mac OS X 10.6.8). Does anyone deal with this problem before? How can I reinstall at least the operation system or just fixing this library will solve the problem?
Note: The reason of using virtualbox is that I need to use a prescribed software that only works in windows environment and since I need to make work in other places the wireless printing is the only viable way to do this.
Process:
Install Mac OS X [58962]
Path:
/Volumes/Mac OS X Install DVD/Install Mac OS
X.app/Contents/MacOS/Install Mac OS X
Identifier:
com.apple.installassistant
Version:
Build Info:
InstallAssistant-480000~1
Code Type:
X86 (Native)
Parent Process: launchd [207]
Date/Time:
2013-02-11 01:18:18.198 +0000
OS Version:
Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report:
48784 sec
Crashes Since Last Report:
10094
Per-App Crashes Since Last Report: 9
Anonymous UUID:
D1A4D697-3F20-4799-9396-A5CEDA61BC62
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /usr/lib/libcups.2.dylib
Referenced from:
/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/P rintCore.framework/Versions/A/PrintCore
Reason: no suitable image found. Did find:
/usr/lib/libcups.2.dylib: mach-o, but wrong architecture
/usr/lib/libcups.2.dylib: mach-o, but wrong architecture
Binary Images:
0x8fe00000 - 0x8fe4163b dyld 132.1 (???)
<4CDE4F04-0DD6-224E-ACE5-3C06E169A801> /usr/lib/dyld
Model: MacBookPro5,5, BootROM MBP55.00AC.B03, 2 processors, Intel Core
2 Duo, 2.26 GHz, 2 GB, SMC 1.47f2
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D),
Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: FUJITSU MJA2160BH FFS G1, 149,05 GB
Serial ATA Device: HL-DT-ST DVDRW GS23N, 7,24 GB
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0x24400000 / 2
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403,
0x26500000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.),
0x8213, 0x06110000 / 4
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.),
0x0237, 0x04600000 / 3
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000 / 2andHere is another option.
I had the same problem with my Mac OSX System 10.8.4 after update cups from 1.6.2 to 1.6.3.
I have a MacBookPro with the same system version and copy the libcups.2.dylib file form /usr/lib/ then replace the error file in my other Mac.
1. Install cups 1.6.2 again
2. Replace the file libcups.2.dylib in /usr/lib/ directory with this one libcups.2.dylib
Note: I added the link if you dont have an other mac in the same version available.
This works for me. -
[Regression] KDE4 does not load anymore after recent kernel update.
Hi,
I have updated my system to latest packages and now KDE4 does not load. i get a Blank Screen.
I can't reach virtual terminals(I tried ALT+F1 to F11, but no response)
Control + ALT + BACKSPACE does not work.
even magic SysRq key(Alt+SysRq+REISUB) has no effect.
So I had to hard reset my machine. somehow I managed to get logs.
/var/log/Xorg.o
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH x86_64
Current Operating System: Linux moody 2.6.30-ARCH #1 SMP PREEMPT Mon Jul 20 07:46:03 CEST 2009 x86_64
Build Date: 18 July 2009 03:49:37PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 30 06:43:33 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) Option "Xinerama" "0"
(**) Option "AutoAddDevices" "False"
(**) Not automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Loader magic: 0xb40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0:1:0:0) 10de:00f3:0000:0000 nVidia Corporation NV43 [GeForce 6200] rev 162, Mem @ 0xf8000000/16777216, 0xe0000000/268435456, 0xf9000000/16777216, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[37] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[38] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[39] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[49] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[51] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[53] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[54] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[55] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[56] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[57] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[58] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[59] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 185.18.14 Wed May 27 01:53:56 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) NVIDIA dlloader X Driver 185.18.14 Wed May 27 01:30:19 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[37] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[38] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[39] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[49] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[51] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[53] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[54] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[55] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[56] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[57] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[58] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[59] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "True"
(**) NVIDIA(0): Option "RenderAccel" "True"
(**) NVIDIA(0): Option "TwinView" "0"
(**) NVIDIA(0): Option "MetaModes" "1280x1024 +0+0"
(**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "CRT-0"
(**) NVIDIA(0): Option "TripleBuffer" "True"
(**) NVIDIA(0): Option "OnDemandVBlankInterrupts" "True"
(**) NVIDIA(0): Option "PixmapCacheSize" "300000"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce 6200 (NV43) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 131072 kBytes
(--) NVIDIA(0): VideoBIOS: 05.43.02.80.00
(II) NVIDIA(0): Detected AGP rate: 8X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 6200 at PCI:1:0:0:
(--) NVIDIA(0): Samsung SyncMaster (CRT-0)
(--) NVIDIA(0): Samsung SyncMaster (CRT-0): 400.0 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Device: CRT-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "1280x1024+0+0"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(--) NVIDIA(0): DPI set to (104, 113); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[37] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[38] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[39] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[49] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[51] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[53] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[54] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[55] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[56] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[57] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[58] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[59] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
(II) NVIDIA(0): configuration option may not be set correctly. When the
(II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
(II) NVIDIA(0): try to use it to receive ACPI event notifications. For
(II) NVIDIA(0): details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): Initialized AGP GART.
/var/log/errors.log
Jul 27 12:08:50 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 27 12:08:50 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 27 12:08:50 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 27 12:08:50 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 27 12:08:50 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 27 12:08:54 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 27 12:09:04 moody kdm[4164]: X server startup timeout, terminating
Jul 30 06:43:36 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 30 06:43:36 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 30 06:43:36 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 30 06:43:36 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 30 06:43:36 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 30 06:43:36 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 30 06:43:40 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 30 06:43:50 moody kdm[4165]: X server startup timeout, terminating
Jul 30 06:44:15 moody kdm[4165]: X server for display :0 cannot be started, session disabled
/etc/X11/xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder62) Tue Jan 6 09:44:34 PST 2009
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder58) Wed Oct 1 15:12:53 PDT 2008
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
# Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "ServerFlags"
Option "AutoAddDevices" "False"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 71.0
VertRefresh 50.0 - 160.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 6200"
Option "NoLogo" "True"
Option "RenderAccel" "True"
Option "TripleBuffer" "True"
Option "BackingStore" "True"
Option "PixmapCacheSize" "300000"
Option "OnDemandVBlankInterrupts" "True"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "1280x1024 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Looks like X server is not starting for some reason and this is the root cause of the problem.
Here is the list of Packages which were Updated
/var/log/pacman.log
[2009-07-25 07:36] synchronizing package lists
[2009-07-25 07:37] starting full system upgrade
[2009-07-25 10:03] synchronizing package lists
[2009-07-25 10:03] starting full system upgrade
[2009-07-25 10:07] upgraded boost (1.39.0-1 -> 1.39.0-2)
[2009-07-25 10:07] upgraded cups (1.3.10-3 -> 1.3.11-1)
[2009-07-25 10:07] upgraded device-mapper (1.02.32-2 -> 1.02.33-1)
[2009-07-25 10:07] upgraded dmapi (2.2.10-1 -> 2.2.10-2)
[2009-07-25 10:07] upgraded dri2proto (2.0-1 -> 2.1-1)
[2009-07-25 10:07] upgraded gcc-libs (4.4.0-5 -> 4.4.1-1)
[2009-07-25 10:08] upgraded gcc (4.4.0-5 -> 4.4.1-1)
[2009-07-25 10:08] upgraded hwdetect (2009.07-1 -> 2009.07-2)
[2009-07-25 10:08] upgraded kbd (1.15-1 -> 1.15-2)
[2009-07-25 10:08] >>> Updating module dependencies. Please wait ...
[2009-07-25 10:08] >>> MKINITCPIO SETUP
[2009-07-25 10:08] >>> ----------------
[2009-07-25 10:08] >>> If you use LVM2, Encrypted root or software RAID,
[2009-07-25 10:08] >>> Ensure you enable support in /etc/mkinitcpio.conf .
[2009-07-25 10:08] >>> More information about mkinitcpio setup can be found here:
[2009-07-25 10:08] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
[2009-07-25 10:08]
[2009-07-25 10:08] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2009-07-25 10:08] ==> Building image "default"
[2009-07-25 10:08] ==> Running command: /sbin/mkinitcpio -k 2.6.30-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
[2009-07-25 10:08] :: Begin build
[2009-07-25 10:08] :: Parsing hook [base]
[2009-07-25 10:08] :: Parsing hook [udev]
[2009-07-25 10:08] :: Parsing hook [autodetect]
[2009-07-25 10:08] :: Parsing hook [ide]
[2009-07-25 10:08] :: Parsing hook [scsi]
[2009-07-25 10:08] :: Parsing hook [sata]
[2009-07-25 10:08] :: Parsing hook [usb]
[2009-07-25 10:08] :: Parsing hook [usbinput]
[2009-07-25 10:08] :: Parsing hook [keymap]
[2009-07-25 10:08] :: Parsing hook [filesystems]
[2009-07-25 10:08] :: Generating module dependencies
[2009-07-25 10:08] :: Generating image '/boot/kernel26.img'...SUCCESS
[2009-07-25 10:08] ==> SUCCESS
[2009-07-25 10:08] ==> Building image "fallback"
[2009-07-25 10:08] ==> Running command: /sbin/mkinitcpio -k 2.6.30-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
[2009-07-25 10:08] :: Begin build
[2009-07-25 10:08] :: Parsing hook [base]
[2009-07-25 10:09] :: Parsing hook [udev]
[2009-07-25 10:09] :: Parsing hook [ide]
[2009-07-25 10:09] :: Parsing hook [scsi]
[2009-07-25 10:09] :: Parsing hook [sata]
[2009-07-25 10:09] :: Parsing hook [usb]
[2009-07-25 10:09] :: Parsing hook [usbinput]
[2009-07-25 10:09] :: Parsing hook [keymap]
[2009-07-25 10:09] :: Parsing hook [filesystems]
[2009-07-25 10:10] :: Generating module dependencies
[2009-07-25 10:10] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
[2009-07-25 10:10] ==> SUCCESS
[2009-07-25 10:10] upgraded kernel26 (2.6.30.1-1 -> 2.6.30.2-1)
[2009-07-25 10:10] upgraded lib32-libgl (7.4.4-1 -> 7.5-1)
[2009-07-25 10:10] upgraded lib32-libpng (1.2.37-1 -> 1.2.38-1)
[2009-07-25 10:10] upgraded lib32-mesa (7.4.4-1 -> 7.5-1)
[2009-07-25 10:10] upgraded lib32-pango (1.24.4-2 -> 1.24.5-1)
[2009-07-25 10:10] upgraded libtool (2.2.6a-2 -> 2.2.6a-3)
[2009-07-25 10:10] upgraded libv4l (0.5.99-1 -> 0.6.0-1)
[2009-07-25 10:10] upgraded lvm2 (2.02.47-2 -> 2.02.48-1)
[2009-07-25 10:10] upgraded mesa (7.4.4-1 -> 7.5-1)
[2009-07-25 10:10] upgraded pango (1.24.4-2 -> 1.24.5-1)
[2009-07-25 10:10] upgraded perl-html-parser (3.60-1 -> 3.61-1)
[2009-07-25 10:10] upgraded perl-libwww (5.825-1 -> 5.829-1)
[2009-07-25 10:10] upgraded qtcurve-gtk2 (0.65.3-1 -> 0.66.0-1)
[2009-07-25 10:10] upgraded qtcurve-kde4 (0.65.4-1 -> 0.66.1-1)
[2009-07-25 10:10] upgraded smplayer (0.6.7-1 -> 0.6.8-1)
[2009-07-25 10:10] upgraded xorg-server (1.6.1.901-3 -> 1.6.2-1)
System Config:
AMD Athlon 64 3000+
Archlinux 2.6.30.2 X86_64
KDE 4.2 Unstable
Nvidia Geforce 6200 Video card
please tell me how to get my desktop back.:)
Last edited by cool (2009-07-30 17:06:32)Installed the nvidia-beta driver from AUR. version:190.18. it crashed on me.
[code]____________________________________________
Start of NVIDIA bug report log file. Please include this file
when reporting a graphics driver bug via the nV News NVIDIA
Linux forum (see www.nvnews.net) or by sending email to
'[email protected]'.
nvidia-bug-report.sh Version: 3969188
Date: Sat Aug 1 18:50:38 PDT 2009
uname: Linux moody 2.6.30-ARCH #1 SMP PREEMPT Mon Jul 20 07:46:03 CEST 2009 x86_64 AMD Athlon(tm) 64 Processor 3000+ AuthenticAMD GNU/Linux
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH x86_64
Current Operating System: Linux moody 2.6.30-ARCH #1 SMP PREEMPT Mon Jul 20 07:46:03 CEST 2009 x86_64
Build Date: 18 July 2009 03:49:37PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 1 18:30:08 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) Option "Xinerama" "0"
(**) Option "AllowEmptyInput" "off"
(**) Option "AutoAddDevices" "False"
(**) Not automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Loader magic: 0xb40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0:1:0:0) 10de:00f3:0000:0000 nVidia Corporation NV43 [GeForce 6200] rev 162, Mem @ 0xf8000000/16777216, 0xe0000000/268435456, 0xf9000000/16777216, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[37] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[38] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[39] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[49] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[51] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[53] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[54] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[55] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[56] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[57] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[58] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[59] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 190.18 Wed Jul 22 16:35:50 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) NVIDIA dlloader X Driver 190.18 Wed Jul 22 15:47:48 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[37] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[38] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[39] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[49] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[51] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[53] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[54] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[55] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[56] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[57] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[58] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[59] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "True"
(**) NVIDIA(0): Option "RenderAccel" "True"
(**) NVIDIA(0): Option "TwinView" "0"
(**) NVIDIA(0): Option "MetaModes" "1280x1024 +0+0"
(**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "CRT-0"
(**) NVIDIA(0): Option "TripleBuffer" "True"
(**) NVIDIA(0): Option "OnDemandVBlankInterrupts" "True"
(**) NVIDIA(0): Option "PixmapCacheSize" "300000"
(**) Aug 01 18:30:10 NVIDIA(0): Enabling RENDER acceleration
(II) Aug 01 18:30:10 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) Aug 01 18:30:10 NVIDIA(0): enabled.
(II) Aug 01 18:30:12 NVIDIA(0): NVIDIA GPU GeForce 6200 (NV43) at PCI:1:0:0 (GPU-0)
(--) Aug 01 18:30:12 NVIDIA(0): Memory: 131072 kBytes
(--) Aug 01 18:30:12 NVIDIA(0): VideoBIOS: 05.43.02.80.00
(II) Aug 01 18:30:12 NVIDIA(0): Detected AGP rate: 8X
(--) Aug 01 18:30:12 NVIDIA(0): Interlaced video modes are supported on this GPU
(--) Aug 01 18:30:12 NVIDIA(0): Connected display device(s) on GeForce 6200 at PCI:1:0:0:
(--) Aug 01 18:30:12 NVIDIA(0): Samsung SyncMaster (CRT-0)
(--) Aug 01 18:30:12 NVIDIA(0): Samsung SyncMaster (CRT-0): 400.0 MHz maximum pixel clock
(II) Aug 01 18:30:12 NVIDIA(0): Assigned Display Device: CRT-0
(II) Aug 01 18:30:12 NVIDIA(0): Validated modes:
(II) Aug 01 18:30:12 NVIDIA(0): "1280x1024+0+0"
(II) Aug 01 18:30:12 NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(--) Aug 01 18:30:12 NVIDIA(0): DPI set to (104, 113); computed from "UseEdidDpi" X config
(--) Aug 01 18:30:12 NVIDIA(0): option
(==) Aug 01 18:30:12 NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[37] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[38] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[39] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[49] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[51] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[53] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[54] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[55] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[56] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[57] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[58] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[59] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(WW) Aug 01 18:30:12 NVIDIA(0): Failed to allocate GLX video capture device array.
(II) Aug 01 18:30:12 NVIDIA(0): Initialized AGP GART.
(II) Aug 01 18:30:12 NVIDIA(0): Setting mode "1280x1024+0+0"
Backtrace:
0: /usr/bin/X(xorg_backtrace+0x26) [0x4ee2e6]
1: /usr/bin/X(xf86SigHandler+0x6f) [0x47b1cf]
2: /lib/libc.so.6 [0x7f4b2a26cf90]
3: /usr/lib/xorg/modules/drivers//nvidia_drv.so(_nv000988X+0x23) [0x7f4b27067893]
4: /usr/lib/xorg/modules/drivers//nvidia_drv.so [0x7f4b2702f988]
5: /usr/lib/xorg/modules/drivers//nvidia_drv.so(_nv001911X+0x2e) [0x7f4b2707975e]
6: /usr/lib/xorg/modules/drivers//nvidia_drv.so [0x7f4b27075814]
7: /usr/lib/xorg/modules/drivers//nvidia_drv.so(_nv002497X+0xaa) [0x7f4b27075faa]
8: /usr/lib/xorg/modules/drivers//nvidia_drv.so(_nv000979X+0x19d) [0x7f4b270503fd]
9: /usr/lib/xorg/modules/drivers//nvidia_drv.so [0x7f4b2704cf69]
10: /usr/lib/xorg/modules/drivers//nvidia_drv.so [0x7f4b272a9d88]
11: /usr/lib/xorg/modules/drivers//nvidia_drv.so [0x7f4b272aa53e]
12: /usr/lib/xorg/modules/drivers//nvidia_drv.so [0x7f4b2729b0bc]
13: /usr/bin/X(AddScreen+0x1d4) [0x433114]
14: /usr/bin/X(InitOutput+0x76f) [0x46e12f]
15: /usr/bin/X(main+0x1fe) [0x43381e]
16: /lib/libc.so.6(__libc_start_main+0xfd) [0x7f4b2a2599ed]
17: /usr/bin/X [0x432e59]
Fatal server error:
Caught signal 11. Server aborting
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
/etc/X11/xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder62) Tue Jan 6 09:44:34 PST 2009
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder58) Wed Oct 1 15:12:53 PDT 2008
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
# Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "ServerFlags"
Option "AutoAddDevices" "False"
Option "Xinerama" "0"
Option "AllowEmptyInput" "off"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 71.0
VertRefresh 50.0 - 160.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 6200"
Option "NoLogo" "True"
Option "RenderAccel" "True"
Option "TripleBuffer" "True"
Option "BackingStore" "True"
Option "PixmapCacheSize" "300000"
Option "OnDemandVBlankInterrupts" "True"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "1280x1024 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
ldd /usr/bin/glxinfo
linux-vdso.so.1 => (0x00007fff7bdff000)
libGL.so.1 => /usr/lib/libGL.so.1 (0x00007f02ea6dc000)
libm.so.6 => /lib/libm.so.6 (0x00007f02ea45a000)
libc.so.6 => /lib/libc.so.6 (0x00007f02ea107000)
libX11.so.6 => /usr/lib/libX11.so.6 (0x00007f02e9dcc000)
libGLcore.so.1 => /usr/lib/libGLcore.so.1 (0x00007f02e89a2000)
libnvidia-tls.so.1 => /usr/lib/libnvidia-tls.so.1 (0x00007f02ea9b8000)
libXext.so.6 => /usr/lib/libXext.so.6 (0x00007f02e8790000)
libdl.so.2 => /lib/libdl.so.2 (0x00007f02e858c000)
/lib/ld-linux-x86-64.so.2 (0x00007f02ea8cb000)
libxcb.so.1 => /usr/lib/libxcb.so.1 (0x00007f02e8370000)
libXau.so.6 => /usr/lib/libXau.so.6 (0x00007f02e816e000)
libXdmcp.so.6 => /usr/lib/libXdmcp.so.6 (0x00007f02e7f69000)
/usr/sbin/lspci -d "10de:*" -v -xxx
01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6200] (rev a2) (prog-if 00 [VGA controller])
Flags: bus master, 66MHz, medium devsel, latency 248, IRQ 16
Memory at f8000000 (32-bit, non-prefetchable) [size=16M]
Memory at e0000000 (32-bit, prefetchable) [size=256M]
Memory at f9000000 (32-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at fa000000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [44] AGP version 3.0
Kernel driver in use: nvidia
Kernel modules: nvidia, nvidiafb
00: de 10 f3 00 07 00 b0 02 a2 00 00 03 00 f8 00 00
10: 00 00 00 f8 08 00 00 e0 00 00 00 f9 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 60 00 00 00 00 00 00 00 0a 01 05 01
40: 00 00 00 00 02 00 30 00 1b 0e 00 ff 02 03 00 1f
50: 00 00 00 00 01 00 00 00 ce d6 23 00 0f 00 00 00
60: 01 44 02 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 80 00 00 01 04 40 c1 00 00 00 00
a0: 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
/usr/sbin/lspci -t
-[0000:00]-+-00.0
+-00.1
+-00.2
+-00.3
+-00.4
+-00.7
+-01.0-[0000:01]----00.0
+-0f.0
+-0f.1
+-10.0
+-10.1
+-10.2
+-10.3
+-10.4
+-11.0
+-11.5
+-12.0
+-18.0
+-18.1
+-18.2
\-18.3
/usr/sbin/dmidecode
# dmidecode 2.10
SMBIOS 2.3 present.
33 structures occupying 998 bytes.
Table at 0x000F0800.
Handle 0x0000, DMI type 0, 20 bytes
BIOS Information
Vendor: Phoenix Technologies, LTD
Version: 6.00 PG
Release Date: 06/01/2005
Address: 0xE0000
Runtime Size: 128 kB
ROM Size: 512 kB
Characteristics:
ISA is supported
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/360 kB floppy services are supported (int 13h)
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
AGP is supported
LS-120 boot is supported
ATAPI Zip drive boot is supported
BIOS boot specification is supported
Handle 0x0001, DMI type 1, 25 bytes
System Information
Manufacturer: MICRO-STAR INTERNATIONAL CO., LTD
Product Name: MS-7142
Version: 1.00
Serial Number:
UUID: Not Present
Wake-up Type: Power Switch
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: MICRO-STAR INTERNATIONAL CO., LTD
Product Name: MS-7142
Version: 1.00
Serial Number:
Handle 0x0003, DMI type 3, 17 bytes
Chassis Information
Manufacturer:
Type: Desktop
Lock: Not Present
Version:
Serial Number:
Asset Tag:
Boot-up State: Unknown
Power Supply State: Unknown
Thermal State: Unknown
Security Status: Unknown
OEM Information: 0x00000000
Handle 0x0004, DMI type 4, 35 bytes
Processor Information
Socket Designation: Socket 754
Type: Central Processor
Family: Athlon 64
Manufacturer: AMD
ID: C0 0F 00 00 FF FB 8B 07
Signature: Family 15, Model 12, Stepping 0
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
MMX (MMX technology supported)
FXSR (Fast floating-point save and restore)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
Version: AMD Athlon(tm) 64 Processor 3000+
Voltage: 1.5 V
External Clock: 200 MHz
Max Speed: 3000 MHz
Current Speed: 2000 MHz
Status: Populated, Enabled
Upgrade: Socket 754
L1 Cache Handle: 0x0008
L2 Cache Handle: 0x0009
L3 Cache Handle: Not Provided
Serial Number:
Asset Tag:
Part Number:
Handle 0x0005, DMI type 5, 20 bytes
Memory Controller Information
Error Detecting Method: 64-bit ECC
Error Correcting Capabilities:
None
Supported Interleave: One-way Interleave
Current Interleave: One-way Interleave
Maximum Memory Module Size: 4096 MB
Maximum Total Memory Size: 8192 MB
Supported Speeds:
70 ns
60 ns
50 ns
Supported Memory Types:
Standard
DIMM
Memory Module Voltage: 2.9 V
Associated Memory Slots: 2
0x0006
0x0007
Enabled Error Correcting Capabilities: None
Handle 0x0006, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: A0
Bank Connections: None
Current Speed: 5 ns
Type: Unknown EDO
Installed Size: Not Installed
Enabled Size: Not Installed
Error Status: OK
Handle 0x0007, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: A1
Bank Connections: 2 3
Current Speed: 5 ns
Type: Unknown EDO
Installed Size: 1024 MB (Double-bank Connection)
Enabled Size: 1024 MB (Double-bank Connection)
Error Status: OK
Handle 0x0008, DMI type 7, 19 bytes
Cache Information
Socket Designation: Internal Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 128 kB
Maximum Size: 128 kB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x0009, DMI type 7, 19 bytes
Cache Information
Socket Designation: External Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 512 kB
Maximum Size: 512 kB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x000A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PRIMARY IDE
Internal Connector Type: On Board IDE
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x000B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SECONDARY IDE
Internal Connector Type: On Board IDE
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x000C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: FDD
Internal Connector Type: On Board Floppy
External Reference Designator: Not Specified
External Connector Type: None
Port Type: 8251 FIFO Compatible
Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: COM1
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
External Reference Designator:
External Connector Type: DB-9 male
Port Type: Serial Port 16450 Compatible
Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: COM2
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
External Reference Designator:
External Connector Type: DB-9 male
Port Type: Serial Port 16450 Compatible
Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: LPT1
Internal Connector Type: DB-25 female
External Reference Designator:
External Connector Type: DB-25 female
Port Type: Parallel Port ECP/EPP
Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Keyboard
Internal Connector Type: PS/2
External Reference Designator:
External Connector Type: PS/2
Port Type: Keyboard Port
Handle 0x0011, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PS/2 Mouse
Internal Connector Type: PS/2
External Reference Designator:
External Connector Type: PS/2
Port Type: Mouse Port
Handle 0x0012, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB0
External Connector Type: Other
Port Type: USB
Handle 0x0013, DMI type 9, 13 bytes
System Slot Information
Designation: PCI0
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 1
Characteristics:
5.0 V is provided
PME signal is supported
Handle 0x0014, DMI type 9, 13 bytes
System Slot Information
Designation: PCI1
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 2
Characteristics:
5.0 V is provided
PME signal is supported
Handle 0x0015, DMI type 9, 13 bytes
System Slot Information
Designation: PCI2
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 3
Characteristics:
5.0 V is provided
PME signal is supported
Handle 0x0016, DMI type 9, 13 bytes
System Slot Information
Designation: PCI3
Type: 32-bit PCI
Current Usage: In Use
Length: Long
ID: 0
Characteristics:
5.0 V is provided
PME signal is supported
Handle 0x0017, DMI type 9, 13 bytes
System Slot Information
Designation: AGP
Type: 32-bit AGP
Current Usage: In Use
Length: Long
ID: 8
Characteristics:
5.0 V is provided
Handle 0x0018, DMI type 13, 22 bytes
BIOS Language Information
Installable Languages: 3
n|US|iso8859-1
n|US|iso8859-1
r|CA|iso8859-1
Currently Installed Language: n|US|iso8859-1
Handle 0x0019, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 8 GB
Error Information Handle: Not Provided
Number Of Devices: 2
Handle 0x001A, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0019
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: No Module Installed
Form Factor: DIMM
Set: None
Locator: A0
Bank Locator: Bank0/1
Type: Unknown
Type Detail: None
Speed: Unknown
Manufacturer: None
Serial Number: None
Asset Tag: None
Part Number: None
Handle 0x001B, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0019
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: A1
Bank Locator: Bank2/3
Type: Unknown
Type Detail: None
Speed: Unknown
Manufacturer: None
Serial Number: None
Asset Tag: None
Part Number: None
Handle 0x001C, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0003FFFFFFF
Range Size: 1 GB
Physical Array Handle: 0x0019
Partition Width: 0
Handle 0x001D, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000000003FF
Range Size: 1 kB
Physical Device Handle: 0x001A
Memory Array Mapped Address Handle: 0x001C
Partition Row Position: 1
Handle 0x001E, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0003FFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x001B
Memory Array Mapped Address Handle: 0x001C
Partition Row Position: 1
Handle 0x001F, DMI type 32, 11 bytes
System Boot Information
Status: No errors detected
Handle 0x0020, DMI type 127, 4 bytes
End Of Table
/sbin/modinfo nvidia | grep vermagic
vermagic: 2.6.30-ARCH SMP preempt mod_unload
Scanning kernel log files for NVRM messages:
/var/log/messages is not readable
/var/log/kernel.log:
Aug 1 17:43:55 moody kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.14 Wed May 27 01:23:47 PDT 2009
Aug 1 18:26:08 moody kernel: NVRM: API mismatch: the client has the version 190.18, but
Aug 1 18:26:08 moody kernel: NVRM: this kernel module has the version 185.18.14. Please
Aug 1 18:26:08 moody kernel: NVRM: make sure that this kernel module and all NVIDIA driver
Aug 1 18:26:08 moody kernel: NVRM: components have the same version.
Aug 1 18:27:04 moody kernel: NVRM: API mismatch: the client has the version 190.18, but
Aug 1 18:27:04 moody kernel: NVRM: this kernel module has the version 185.18.14. Please
Aug 1 18:27:04 moody kernel: NVRM: make sure that this kernel module and all NVIDIA driver
Aug 1 18:27:04 moody kernel: NVRM: components have the same version.
Aug 1 18:29:30 moody kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module 190.18 Wed Jul 22 15:36:09 PDT 2009
Aug 1 18:30:12 moody kernel: NVRM: Xid (0001:00): 6, PE0000 0104 00000000 00000000 ffffffff 00000000
Aug 1 18:30:12 moody kernel: NVRM: Xid (0001:00): 6, PE0000 0104 00000000 00000000 ffffffff 00000000
dmesg:
Linux version 2.6.30-ARCH (root@T-POWA-LX) (gcc version 4.4.0 20090630 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Jul 20 07:46:03 CEST 2009
Command line: root=/dev/disk/by-uuid/ee4f81b6-1e0f-4ab9-a1e2-d6109732dbc5 ro
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
DMI 2.3 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x3fff0 max_arch_pfn = 0x100000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-CFFFF uncachable
D0000-D7FFF write-back
D8000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 0000000000 mask FFC0000000 write-back
1 base 00F0000000 mask FFF8000000 write-combining
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009f400 (usable)
modified: 000000000009f400 - 00000000000a0000 (reserved)
modified: 00000000000f0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000003fff0000 (usable)
modified: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
modified: 000000003fff3000 - 0000000040000000 (ACPI data)
modified: 00000000fec00000 - 00000000fec01000 (reserved)
modified: 00000000fee00000 - 00000000fee01000 (reserved)
modified: 00000000ffff0000 - 0000000100000000 (reserved)
init_memory_mapping: 0000000000000000-000000003fff0000
0000000000 - 003fe00000 page 2M
003fe00000 - 003fff0000 page 4k
kernel direct mapping tables up to 3fff0000 @ 10000-13000
RAMDISK: 37f00000 - 37fefc8d
ACPI: RSDP 00000000000f6b80 00014 (v00 VIAK8M)
ACPI: RSDT 000000003fff3040 0002C (v01 VIAK8M AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP 000000003fff30c0 00074 (v01 VIAK8M AWRDACPI 42302E31 AWRD 00000000)
ACPI: DSDT 000000003fff3180 04D34 (v01 VIAK8M AWRDACPI 00001000 MSFT 0100000E)
ACPI: FACS 000000003fff0000 00040
ACPI: APIC 000000003fff7f00 0005A (v01 VIAK8M AWRDACPI 42302E31 AWRD 00000000)
ACPI: Local APIC address 0xfee00000
(7 early reservations) ==> bootmem [0000000000 - 003fff0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0000200000 - 000082c0d0] TEXT DATA BSS ==> [0000200000 - 000082c0d0]
#3 [0037f00000 - 0037fefc8d] RAMDISK ==> [0037f00000 - 0037fefc8d]
#4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000]
#5 [000082d000 - 000082d0b6] BRK ==> [000082d000 - 000082d0b6]
#6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
found SMP MP-table at [ffff8800000f4b80] f4b80
[ffffe20000000000-ffffe20000dfffff] PMD -> [ffff880001200000-ffff880001ffffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0003fff0
On node 0 totalpages: 262015
DMA zone: 56 pages used for memmap
DMA zone: 1680 pages reserved
DMA zone: 2247 pages, LIFO batch:0
DMA32 zone: 3528 pages used for memmap
DMA32 zone: 254504 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 25 pages at ffff88000100a000, static data 72352 bytes
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256751
Kernel command line: root=/dev/disk/by-uuid/ee4f81b6-1e0f-4ab9-a1e2-d6109732dbc5 ro
Initializing CPU#0
NR_IRQS:768
PID hash table entries: 4096 (order: 12, 32768 bytes)
Fast TSC calibration using PIT
Detected 1999.604 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Checking aperture...
AGP bridge at 00:00:00
Aperture from AGP @ f0000000 old size 32 MB
Aperture from AGP @ f0000000 size 128 MB (APSIZE f20)
Node 0: aperture @ f0000000 size 128 MB
Memory: 1024112k/1048512k available (3409k kernel code, 452k absent, 23372k reserved, 1239k data, 460k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.84 BogoMIPS (lpj=6665346)
Security Framework initialized
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
tseg: 0000000000
SMP alternatives: switching to UP code
Freeing SMP alternatives: 20k freed
ACPI: Core revision 20090320
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 00
Brought up 1 CPUs
Total of 1 processors activated (4000.84 BogoMIPS).
CPU0 attaching NULL sched-domain.
net_namespace: 1888 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
node 0 link 0: io port [1000, fffff]
TOM: 0000000040000000 aka 1024M
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [40000000, ff70ffff]
bus: [00,ff] on node 0 link 0
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [a0000, bffff]
bus: 00 index 2 mmio: [40000000, fcffffffff]
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI Warning (dsobject-0502): Package List length (6) larger than NumElements count (3), truncated
[20090320]
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 10 32bit mmio: [0xf0000000-0xf7ffffff]
pci 0000:00:01.0: supports D1
pci 0000:00:0f.0: reg 10 io port: [0xe000-0xe007]
pci 0000:00:0f.0: reg 14 io port: [0xe100-0xe103]
pci 0000:00:0f.0: reg 18 io port: [0xe200-0xe207]
pci 0000:00:0f.0: reg 1c io port: [0xe300-0xe303]
pci 0000:00:0f.0: reg 20 io port: [0xe400-0xe40f]
pci 0000:00:0f.0: reg 24 io port: [0xe500-0xe5ff]
pci 0000:00:0f.1: reg 20 io port: [0xe600-0xe60f]
pci 0000:00:10.0: reg 20 io port: [0xe700-0xe71f]
pci 0000:00:10.0: supports D1 D2
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: PME# disabled
pci 0000:00:10.1: reg 20 io port: [0xe800-0xe81f]
pci 0000:00:10.1: supports D1 D2
pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.1: PME# disabled
pci 0000:00:10.2: reg 20 io port: [0xe900-0xe91f]
pci 0000:00:10.2: supports D1 D2
pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.2: PME# disabled
pci 0000:00:10.3: reg 20 io port: [0xea00-0xea1f]
pci 0000:00:10.3: supports D1 D2
pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.3: PME# disabled
pci 0000:00:10.4: reg 10 32bit mmio: [0xfb000000-0xfb0000ff]
pci 0000:00:10.4: supports D1 D2
pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.4: PME# disabled
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:11.5: reg 10 io port: [0xeb00-0xebff]
pci 0000:00:11.5: supports D1 D2
pci 0000:00:12.0: reg 10 io port: [0xec00-0xecff]
pci 0000:00:12.0: reg 14 32bit mmio: [0xfb001000-0xfb0010ff]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.0: PME# disabled
pci 0000:01:00.0: reg 10 32bit mmio: [0xf8000000-0xf8ffffff]
pci 0000:01:00.0: reg 14 32bit mmio: [0xe0000000-0xefffffff]
pci 0000:01:00.0: reg 18 32bit mmio: [0xf9000000-0xf9ffffff]
pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:00:01.0: bridge 32bit mmio: [0xf8000000-0xfaffffff]
pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xefffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 *12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [ALKA] (IRQs *20)
ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
ACPI: PCI Interrupt Link [ALKD] (IRQs *23)
PCI: Using ACPI for IRQ routing
pci 0000:00:00.0: BAR 0: can't allocate resource
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
agpgart-amd64 0000:00:00.0: AGP bridge [1106/0204]
agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: mem resource (0xdcc00-0xdffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x7ffffff), disabling
pnp 00:00: mem resource (0xf0000-0xf7fff) overlaps 0000:00:00.0 BAR 0 (0x0-0x7ffffff), disabling
pnp 00:00: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 0 (0x0-0x7ffffff), disabling
pnp 00:00: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x7ffffff), disabling
pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x7ffffff), disabling
pnp 00:00: mem resource (0x100000-0x3ffeffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x7ffffff), disabling
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0x3fff0000-0x3fffffff could not be reserved
system 00:00: iomem range 0xffff0000-0xffffffff has been reserved
system 00:00: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved
system 00:02: ioport range 0x4000-0x407f has been reserved
system 00:02: ioport range 0x5000-0x500f has been reserved
system 00:03: ioport range 0xb78-0xb7b has been reserved
system 00:03: ioport range 0xf78-0xf7b has been reserved
system 00:03: ioport range 0xa78-0xa7b has been reserved
system 00:03: ioport range 0xe78-0xe7b has been reserved
system 00:03: ioport range 0xbbc-0xbbf has been reserved
system 00:03: ioport range 0xfbc-0xfbf has been reserved
system 00:03: ioport range 0x4d0-0x4d1 has been reserved
system 00:03: ioport range 0x290-0x297 has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: disabled
pci 0000:00:01.0: MEM window: 0xf8000000-0xfaffffff
pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff
pci 0000:00:01.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfaffffff]
pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs...
Freeing initrd memory: 959k freed
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1249151352.183:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 2003
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:01.0: disabling DAC on VIA PCI bridge
pci 0000:01:00.0: Boot video device
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 460k freed
Uniform Multi-Platform E-IDE driver
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
via82cxxx 0000:00:0f.1: VIA vt8237 (rev 00) IDE UDMA133
via82cxxx 0000:00:0f.1: IDE controller (0x1106:0x0571 rev 0x06)
ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
VIA_IDE 0000:00:0f.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
via82cxxx 0000:00:0f.1: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xe600-0xe607
ide1: BM-DMA at 0xe608-0xe60f
Probing IDE interface ide0...
Switched to high resolution mode on CPU 0
Probing IDE interface ide1...
hdc: BENQ DVD DD DW1650, ATAPI CD/DVD-ROM drive
hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hdc: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
SCSI subsystem initialized
libata version 3.00 loaded.
sata_via 0000:00:0f.0: version 2.4
sata_via 0000:00:0f.0: PCI INT B -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
sata_via 0000:00:0f.0: routed to hard irq line 11
scsi0 : sata_via
scsi1 : sata_via
ata1: SATA max UDMA/133 cmd 0xe000 ctl 0xe100 bmdma 0xe400 irq 20
ata2: SATA max UDMA/133 cmd 0xe200 ctl 0xe300 bmdma 0xe408 irq 20
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: ST380815AS, 4.AAB, max UDMA/133
ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST380815AS 4.AA PQ: 0 ANSI: 5
ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
ide-cd driver 5.00
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
ehci_hcd 0000:00:10.4: PCI INT C -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.4: irq 21, io mem 0xfb000000
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:<6>ide-cd: hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:10.0: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 21, io base 0x0000e700
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.1: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.2: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e900
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.3: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:10.3: irq 21, io base 0x0000ea00
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 1-5: new high speed USB device using ehci_hcd and address 3
usb 1-5: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
usb 2-2: new low speed USB device using uhci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram
udev: starting version 141
via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
via-rhine: Broken BIOS detected, avoid_D3 enabled.
ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
via-rhine 0000:00:12.0: PCI INT A -> Link[ALKD] -> GSI 23 (level, low) -> IRQ 23
eth0: VIA Rhine II at 0x1ec00, 00:11:09:06:18:c6, IRQ 23.
eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 41e1.
ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22
VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Successfully done.
vboxdrv: Found 1 processor cores.
VBoxDrv: dbg - g_abExecMemory=ffffffffa02a36a0
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 3.0.2 (interface 0x000e0000).
VBoxNetFlt: dbg - g_abExecMemory=ffffffffa0447ec0
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
processor ACPI_CPU:00: registered -
Photoshop CS4 Issues with the NVIDIA GeForce 8800?
I have an Mac Pro Intel 2 x 2.8 GHz Quad-Core Xeon with 6GB RAM running OS X 10.5.5 and an NVIDIA GeForce 8800 GT driving two monitors.
I just installed Adobe Photoshop CS4 fresh from a factory CD.
When I perform a Distort -> Lens Correction or do a Free Transform to rotate an image an arbitrary amount, and then follow that with a resize (tried 133% and 166%), the image ends up with a pattern of gray plaid overlaid -- especially visible in the darkest shadows. The pattern appears only on the rotated layers of an image.
This pattern persists if I quit and restart Photoshop, BUT -- there's no pattern visible if I open the same image in Photoshop CS3. It only appears in CS4.
This is easy to reproduce -- I just tried it with an image I created in Photoshop at 5x7" at 240dpi and filled with solid black.
I dropped a Bug Report to Adobe, and they wrote back suggesting "This is most likely an issue with your video card driver."
Anybody else out there having this issue? Anyone with an identical setup want to test this?
-=-Joesako75 wrote:
I'm seeing what you are talking about when viewing at 200% and up on my 300dpi images. I'm thinking that its the new pixel grid overlay for dialing in the details on the image.
No, that's not it. I can see it at 100%, and only on images that have been rotated and resized.
In fact, yesterday I rotated one layer under an unrotated layer, and only the rotated layer showed the plaid pattern.
And it's not a simple grid -- it's a real plaid-like gray, almost like stretch marks.
-=-Joe -
IMovie08 has never worked for me, is it My NVIDIA GeForce 8800 GT card???
My preinstalled copy of iMovie v 7.1.1 will not startup, the dock icon will show that the app is not responding
I have a fresh out of the box 2 x 3.2 Ghz Quad-Core Intel Xeon Power Mac
pre-installed Mac OSX 10.5.1
I migrated from my titanium laptop to my new Mac.
migrated my user account, applications and system settings
then used the Mac OSX 10.5.2 combo update
I then reinstalled iMovie
running disk permission repair before and after each of the step I took above
still no go
Application Not Responding
several post state that removing some of the preferences will help this issue but so far those haven't worked at all in my case
would be great to know exactly which preferences have anything to do with iMovie
I have scanned over the discussions and seen this very topic all over, but no apple tech responding.
please let us in on how to resolve this issue
I hope we can do this without completely reinstalling all software.(makes a preinstall pretty useless)
thanks for any and all suggestions
-P
sys config:
Mac Pro 2 x 3.2 Ghz Quad-Core Intel Xeon
Mac OS 10.5.2
10 GB RAM
NVIDIA GeForce 8800 GT video card
plenty of harddisk spaceDo it in Windows:
http://www.softpedia.com/get/Tweak/Video-Tweak/GeForce-Overclocking-CoolBits-Reg .shtml
Maybe you are looking for
-
When ever I try to watch any video, from a link or YouTube say, using Firefox, I get a message 'An error as occurred. Please try again later'. It has been this way for some weeks. I don't have this problem using Safari or Opera.
-
Why can't I see mail I sent from my iPhone on any other device?
I've had a mac.com email address for many years now, on my iPhone and my Mac (running Lion now). Here's the problem -- when I check INBOXES from device to device the contents are always the same (i.e. synced), but this is not so with SENT mail. It ap
-
SMSY//Logical component definition - multiple roles for one system?
Dear all, as our client has a divided system landscape (three-tier operational line as well as two-tier development line) some systems have more than one role to fill. The development system on development line is source system for all developments,
-
Will Family base allow me to see content of text messages?
will Family base allow me to see content of text messages? can app be put on my childs phone without them knowing?
-
ERROR after installing Application Development Runtime 11.1.1.5
hi i have install Application Development Runtime 11.1.1.5 for jdev 11g release 2 ofm_appdev_generic_11.1.1.5.0_disk1_1of1OracleFusionMiddleware11gRelease1 now when i try to open my jspx file my weblogic is 10.1.3 am on window xp am not able to do an