Geforce FX auto-overclock feature

Hi, the latest forceware 55 series of driver has a feature for auto-overclock. After
enabled, NFSUG showed improvement in speed, but the GPU and MEM clock speed at the NV controlpanel is default. Any detail infos on how auto-overclock function ?

I was asking the same question a week ago and i found the answer on the back of the box D.O.T works great for me and its backed by msi. I set mine at captain that means it will overclock about 6% when it needs it .  If it  doesn't need overclocking  it will return to the normal cycles ( stopped playing a 3d game )   :biggthumbsup:Dynamic great idear

Similar Messages

  • Auto-Overclocking; Latest Forcewares

    I got the latest forcewares and i dont see any auto overclocking feature. I already registed coolbits and see manual ocing but no auto ocing. I have msi geforcefx5600

    The only issue I've had with the ForceWare 56.64 drivers and AutoOCing is that they are very optimistic in the speeds.
    My auto-test showed my FX 5200 as capable of doing 320 core and 560 memory under 3D.
    I set them to these.
    After about 10 minutes playing UT2004, the game would crash back to the desktop.
    In addition, running 3D Mark 2001 SE at these settings would cause strange anomolies in the display.
    I set the core to 280 and memory to 500.  The video memory chips were Samsung 4ns chips which meant they were rated for 250 MHz speed (500 DDR).
    Now everything functions fine at 280/500.
    If I try to set my core to 290, I get strange things happening again.
    Likewise if I try to extend my memory speed beyond 500.
    So 280/500 is the maximum stable OC I could achieve.  The AutoTest however found 320/560.
    I would recommend running your memory at the maximum safe speed and the core at no more than 10% above rated speed.
    This is for extra performance with rock solid stability.

  • K9A2 CF - Post hangs on Overclocking features have failed

    System Hardware:
    MSI K9A2 CF-F Ver. ??? doesn't say on board
    AMD Phenom 9600+ @ 2.3GHz - @ stock settings
    4 x 1GB Crucial Ballistix Tracer DDR2-800 @ stock voltage and timings
    MSI GeForce 8500GT (silent) @ stock settings
    Silverstone ST-60F - 600W power supply
    2 x WD5000AAKS - 500GB SataII in Raid 1
    1.44MB Sony Floppy
    2 x Asus 20x DVD-R/W DL w/Lightscribe
    problem: every time the PC boots up I get an error on the Post screen that states Overclocking features have failed Press F1 to go into Bios or F2 to resume. I have never Overclocked this board or any hardware on it. I have checked to make sure that nothing was accidently o/c'd in Bios
    Cool n' quiet - disabled
    D.O.T. - disabled
    manual O/C - all stock settings
    HPET - disabled
    PCI-e - stock
    CPU - stock
    RAM - stock
    HT - stock
    everything looks to be normal in the BIOS. I have tested the ram using OCZ memtest86 and all 4 gigs have been tested individually in slot 1 to be good. then I took 2 sticks and tested in slots 1-2, then other 2 sticks in slot 3-4 and tested pairs individually = good, then all 4 sticks at once = good. tested the PSU = never fluctuated on any of the rails. I am stumped. I even upgraded the BIOS in increments from version board came with all the way up to 1.7 (current) and still happens. Is this a bad board?
    any help would be appreciated
    ~D~

    henry,
    Good catch on the ram speed. I will check that out. I have built many PC's with 4 x 1GB and none of them have had problems but, none of them were using K9A2 CF boards either.
    Thanks,
    ~D~
    Quote from: Henry on 30-January-09, 04:41:32
    If it is Ver 2 it would more than likely have a sticker K9A2 CF V2 covering the onboard printed K9A2 CF name and a heatsink on the CPU VRM MOSFETs. Somewhere there's a thread with pictures. As far as I know none of the -F MBs have the -F printed on them.
     Someone else will probably verify this but I think you need to slow down the RAM from 400 to 333 when using 4x sticks. Do you get the same error if only 2 sticks installed? It would be better to use 2x2GB instead of 4x1GB

  • HT5824 I've been using numbers for iPad and I accidentally deleted a column. And the auto-save feature saved that and now I can't undo it. Does iCloud storage have backups of saved files from like 10 minutes ago? I have number

    I've been using numbers for iPad and I accidentally deleted a column. And the auto-save feature saved that and now I can't undo it. Does iCloud storage have backups of saved files from like 10 minutes ago? I have numbers synced to iCloud.
    I tried to undo it but the app crashed.
    I am hoping there's like a previously saved version of my file in iCloud somewhere. 

    No, iOS does not do short term incremental back ups to iCloud such as you get with Time Capsule.It backs up when you do soo manually, or if set properly, when the device is plugged in and connected to WiFi. It will not have saved your changes as of 10 minutes prior.

  • My auto translate feature is not working on firefox v5. When I highlight a few words and right click, the option is'nt there to translate. Why?

    Ok so my auto translate feature does not seem to be working. When trying to translate text on twitter or any page I highlight the text, right click and the option to auto translate has gone. I am running firefox v5 on vista. Can anyone help me out.
    thanks

    Sorry that my guess about what you are using was wrong. How about telling us exactly what you installed to provide that '''auto translate''' feature in Firefox?
    If you don't know, give us a list of the extensions that you ''do'' have installed so that we don't have to wildly guess or so we can do an '''''educated guess''''' as to which one isn't working.
    Help > Troubleshooting Information = use the '''Copy all to clipboard''' button, then paste into a text editor program. Then delete all but the list of '''Extensions''' and copy'n'paste that to the Reply box here.

  • We are trying to package our iTunes Windows and we can't stop the auto update feature.  How can we do this?

    We have consultants here packaging many of our Apps for deployment with Windows 7.  We cannot find a way to turn off the auto update feature within iTunes for Windows.  Has someone been successful in packaging iTunes for Windows and NOT do the auto update piece?

    The Apple advice revolves around the editing the registry:
    Windows OS Managed Client: How to manage iTunes control features
    ... but it's beyond my competence to advise how to work that particular registry edit into a deployment, I'm afraid.

  • To Turn off of or set auto complete feature in Adobe reader 8 through LC designer

    Hi i am developing the XDP through LC designer . After renering the PDF through form server if i open the PDF in adobe reader 8 it pop up message saying auto complete . I dont want to dispaly the pop up message iwhile opening the PDF in reader 8 . So Please provide scripts or some alternative to set in the XDP side to set the auto complete eature to off

    Hi,
    I suspect that the auto complete feature is turned on in Reader 8 (and off in Reader 9).
    Open Reader 8 and go the preferences:
    Make sure auto complete is turned off.
    Good luck,
    Niall

  • Auto-Suggest feature in Combo-box LOV is not displaying non-unique values

    Hi,
    I have an auto-suggest feature implementation on a combo-box lov that displays the name and email-id of a list of people. There are non-unique names in the back-end, for example :
    Abraham Mason [email protected]
    Abraham Mason [email protected]
    But when I use the auto-suggest feature and type in, say 'Ab', instead of showing both the Abraham Masons the auto-suggest displays only one of the values.
    As in the example above the email-ids of the two Abraham Masons are different and unique.
    If I use the conventional drop down menu of the combo-box then both the values are visible.
    Is the auto-suggest feature implemented in a manner so as to display only unique values?
    This is the implementation of the auto-suggest feature that I have done -
    <af:column headerText="#{bindings.RqmtAtLevel1.hints.Owner.label}"
    id="c23" sortable="true" filterable="true"
    sortProperty="Owner"
    filterFeatures="caseInsensitive">
    <af:inputComboboxListOfValues id="ownerId"
    popupTitle="#{ResourcesGenBundle['Header.SearchandSelect.Searchandselectanobjectusingad']}: #{bindings.RqmtAtLevel1.hints.Owner.label}"
    value="#{row.bindings.Owner.inputValue}"
    model="#{row.bindings.Owner.listOfValuesModel}"
    required="#{bindings.RqmtAtLevel1.hints.Owner.mandatory}"
    columns="#{bindings.RqmtAtLevel1.hints.Owner.displayWidth}"
    shortDesc="#{bindings.RqmtAtLevel1.hints.Owner.tooltip}"
    autoSubmit="true">
    <f:validator binding="#{row.bindings.Owner.validator}"/>
    <af:autoSuggestBehavior suggestedItems="#{row.bindings.Owner.suggestedItems}"/>
    </af:inputComboboxListOfValues>
    </af:column>
    Thanks,
    Anirudh Acharya

    Hi,
    don't find a bug entry about this, so if this indeed is a defect then this has not been filed. Do you have a test case ? If you have please zip it up and send it in a mail to me. My mail address is in my OTN profile (just click on my name until you get to the profile). Pleas rename the "zip" extension to "unzip" and mention the JDeveloper release you work with. The test case should work against the Oracle HR schema.
    If you need to track the issue, I suggest to file a service request with customer support yourself
    Frank

  • Screen Sharing scrolling, can the auto-pan feature be turned off?

    I am using screen sharing from home on my MacBook Pro to connect to my Mac Pro at work and it performs really well in all respects but one. My Mac Pro has dual monitors, so Screen Sharing running on my MacBook Pro gives me the option of either scaling the larger screen down, which is not readable, or being able to scroll around the larger screen of my work machine. The problem is that Screen Sharing has the automatic pan feature so that if my mouse moves to the edge of the window showing the shared screen then it starts scrolling it. This is nice the first time you see it but quickly becomes annoying because every random mouse movement that takes me to the edge of the window, like moving the mouse out of that window to go the the dock or the menu of my MacBook Pro, starts scrolling the screen when I did not want it to. I find myself constantly re-centering the view of the shared screen in the window back to the position I want it in and I find this to be a very anti-productive waste of time. I would like the auto-pan feature disabled so that it will only scroll when I grab a scroll bar and move it. Is it possible to do this?

    Hey all,
    I'm having the exact same problem with a Toshiba Satellite P300 here. The multimedia button seems so sensitive that the laptop will turn on by itself after a while. I haven't been able to find a program to disable it. Has anyone found a solution to this? If you do, please send me an email at [email protected] (remove the nospam) so I can fix it once and for all.
    Thanks,
    Dre

  • Reordering pages: No auto renumbering feature?

    I think I'm missing something here. I've changed the order of a few pages, and it went well. However, the original page numbers are intact, and now out of sequence.
    Must I manually change all of my page numbers to reflect their new numerical order, then re-publish?
    Trust me, I've checked the help file, and thoroughly searched the discussion forum, but find nothing about page renumbering - and certainly not an auto-renumbering feature.
    Thanks.

    Sorry, there is no pagination or page numbering on/off feature. Silly that such a basic function does not exist. Pages are numbered according to their order of creation, and so I had to renumber 30+ pages manually, and during the re-publish process I got an error message regarding one of the page numbers and I have no idea what it meant, nor how to correct the error.
    Let us hope that a few of the very basic features that we have come to expect in a word processor - like auto pagination, will be included in the next iWeb patch or version upgrade.

  • How to Implement Auto tabbing feature in a table region???

    Hi All,
    I am trying to implement auto tabbing feature in one of my OAF page using java script which is actually working for individual items but
    while implementing the same for a table bean its not working. is there any way to implement this feature in OAF without using java script?
    if not could anyone give some rough java script for this feature? please this is urgent..
    Thanks in advance
    Sree

    Sree,
    check this if it helps ;
    https://forums.oracle.com/thread/963732
    Not sure we can set Focus in : PFR ,  I hope it is possible in only PR.
    Regards
    Sridhar

  • Recommeneded Auto Update Feature in 11.1 Grid Control

    Hi All,
    I would like inform you about New Auto Update feature in the 11.1 Grid Control Installer. This feature allows the latest recommended patches to be automatically deployed while installing a fresh 11.1 Grid control or while upgrading an existing Grid control to 11.1 version.
    These auto updates ensure that any patches required by the oracle installer or for successful installation/upgrade of the product are applied before the actual installation or upgrade process. It ensures that there are no failed installations or upgrades from known issues.
    Oracle highly recommends using this feature to ensure that any new or upgraded Enterprise Manager installation is successful
    To know more about usage and benefits of this feature Refer to :
    1. Note.1101208.1 Required Patches for Grid Control 11g (11.1.0.1.0) on Linux
    2. Note.1099123.1 Overview of the "Auto Update" Feature Available with Grid Control 11g Install/Upgrade
    3. Refer to this PDF
    4. Use Install forum to place your queries
    Note:- If you have downloaded and installed your Grid control before15th May 2010 then we recommend you to apply this Generic Agent patch 9676134 on all your target boxes. Refer to the Read-me of the patch for exact instructions. If you don't have this patch applied then you will see this patch appear in MOS recommended section for that target as well.
    This patch fixes the performance issue that is caused by Grid control 11.1 running a metric query against the v$rman_backup_job_details view on target database instances for Oracle Database 10g Release 2 (10.2.0.1) or higher. In some situations, this query might expose RDBMS bug 8434467, in which the query can run for an extended period of time, resulting in high CPU utilization.If you notice this problem, it is recommended that you apply the patches listed below, which will reduce the the frequency of the query.

    Thank you

  • Air 2.0 Auto update Feature Experts help me on this issue  please.......

    Hi ,
          Is it possible to Auto update  a air application using air 2.0 beta . If so can any one post me the  related link.
    I recently updated my flex builder 3  to 3.2 and along with Air 2.0. One of my old project which has a auto  update feature seems to be not working
    I get this error message
    "  VerifyError: Error #1053: Illegal override of callInContext in  _ApplicationUpdaterDialogs_mx_managers_SystemManager." What should i do  to over come this problem please help me .
    Regards,
    Rahul.

    Hi Rahul,
    I understand that you're using Flex 3.x SDK with AIR 2 beta 2 SDK overlay.
    Make sure you're using (linking in your project) the Flex3 compatible UI lib from AIR 2 beta 2 SDK: that's the one under "frameworks\libs\air\flex3\applicationupdater_ui3.swc".
    The default UI lib available with AIR 2 beta2 SDK under  "frameworks\libs\air\applicationupdater_ui.swc" is compatible with Flex4.
    Hope this helps,
    Best regards,
    Dragos Georgita | AIR Engineering

  • Implementing auto refresh feature in POWL

    Hi,
       I need to know how to implement auto refresh feature in POWL ( Personalize Object Work List ) after pressing any button present in the tool bar on POWL.
    I think this will be implemented in method HANDLE_ACTION of POWL. I need to know how to implement it.
    Regards,
    Maqsood

    Hi Maqsood, could you provide a little more info.
    By pressing right click (or ctrl-right click is sp7 or earlier) you can find the name of an button
    and the name view and teh WD Comp name. All useful if we are to help.
    Also im not sure what autorefresh should do.
    Did you see the start plugs on the POWL ?
    There is a refresh option there.
    How is the POWL being launched ?
    regards
    Phil

  • How do i turn off the auto lock feature?  In my options it does not have "never" on it.  It is only timed amounts.

    How do I turn off the auto lock feature.  I have only timed options.  There is not the "never" option available.

    I've got options for 2, 5, 10, 15 minutes and Never. Have you got an Exchange email account on your iPad ? 'Never' can be removed so as to protect a company's potentially sensitive email - they may not want the iPad being left/stolen with the emails on it accessible. If you remove the account the Never option will probably reappear

Maybe you are looking for