GeForce-FX5200 tv-out and graphic problem...

Celeron 1 GHz
Mainboard MSI 6309 v2
MSI GeForce-FX 5200 128MB
Windows XP
Does it just software problem ? Or is it hardware problem ?
Problem is:
When I'm turning on tv-out in nview on my TV screen is very very weird,
it's dark but I can see desktop etc and colours are very weird, looks like
it is showing up in 16 colors.
chkdsk on startup when I do hard reset, screen that should be blue is yellow
and it's in 16 colours too.
I don't get it. Any suggestions ?
Btw I wanted to try install windows98 and check if this is software problem
but when I type setup and hit enter nothing happen, only black screen and everything
what can I do is restart computer.
Is it really my graphic card ? I hope it's something in BIOS or in software cause I have warranty to this card but I will have to wait 14 days before I will get it back.
Sorry for my language.
And I almost forgot, one month ago everything was ok and then out of nowhere...

hey guys i had this problem since quite long...even changed my cable 2 times. But now with one setting i have solved half of the problem. Now the video is coming in the TV but no sound. In n97 go to setting then go to phone then go to accessories then go to TV out. Changed Pal to NTSC and it started shoing atleast video on my TV. Can anyone help how to get the sound also.

Similar Messages

Macbook Pro Screen and Graphics Problems

I just bought a macbook pro 15" 2.53 GHz model today. I haven't even had it 12 hours and am having problems. First when I tried the screen saver it messes up, adds big squares where there aren't supposed to be any. So I just tried playing The Sims 3 to test the graphics and that played fine. Now as I am typing this the screen keeps flashing blue. Either making it seem like everything is being highlighted or going all blue for a split second.
What is going on?
I'm going back to the Apple Store tomorrow, this is not okay.

Make sure to make an appointment if you want to be seen fairly quickly. They should be able to swap you out for a new one right away.

Line out and headphone problems

Just recently I have started to have a problem where if I use the line-out funtion of my iPod audio will not come out of the headphones afterwards. I use the Belkin auto-kit so I just connect my iPod whenever I drive somewhere, and it annoys me that I have to reset my iPod every time I want to listen through my headphones. I have tried unplugging and plugging back in, increasing and decreasing the volume, pausing/resuming, and changing songs but to no avail. The only solution is resetting the iPod. I was just wondering if anyone out there has had this problem, or knew if there was a more practical solution than just resetting the iPod every time.
5g iPod 30GB Windows XP Pro

Went to the genius bar earlier today to have my Mac Pro looked at. They said that front board and backplane failure is fairly common. In fact, the genius mentioned that his own 12-core suffered the same issues insofar as audio crackling and eventual analog out failure.
I should be getting it back in 5-7 days.

Clipping paths - outer and inner problem

Mac G5 OS 10.4.11 CS4. - I have an image of a box shape paper clip I wish to have as transparent backgrounds and use in magazine articles. I make a clipping path on the outer shape and it works fine saved as a JPG (see attachment) but I also want the enclosed inner part of the paper clip to be transparent so that when I position it over an image in a magazine it looks as though it is attached to that image.
I made the outer path and then made an inner one - ie. 2 paths on the same layer (tried separate layers still did not work) but the paths will not act as a clipped path together. Tried saving the file as a straight EPS with transparent background and that did not work either. What am I doing wrong?

Mike - I had always thought that EPS was the only successful way to support transparency and your advise on using PSD or TIFF is one I will add to my armoury when memory is not an issue. Like you I thought JPG and transparency ware incompatible, but working on contract at a publishers recently a young graphic designer fresh from college said he always used JPG for clipping paths. So thinking he was wrong I tried it and was surprised to find it does work, I have no doubt you are as sceptical as I was and will try it for yourself. Thanks for the relpy.

PowerBook Constant Freeze and Graphics Problems

I have a Powerbook 12" 1.33Ghz Leopard 10.5.2 , I star to work in anything and in a few minutes its freezes and appears a Kernel Panic or de backend System Text start to output reports overwriting the last graphic image.. here a picture..
http://cyberkiko3d.com/down/photo.jpg
I remove the memory card, and stills hapening..
I want to know is this is just a kernel problem that it stops formating or is a hardware problem involving the LogicBoard or Graphic Card..
Thanks

I guess memory can fail over time. I just haven't experienced it myself. (Or heard of it, but it is a piece of hardware).
You can test your RAM by either using your system installation / restore discs (the original grey discs that came with your machine) and pop in Disc 1 and reboot the computer holding down the OPTION key and from there, you will get the choice for Apple Hardware Test, which you can use to do a basic test of your RAM.
Second, if you ever signed up for AppleCare and got the TechTool Deluxe disc that comes with it, you can use that too for a more extensive RAM test. Just be careful not to use it to diagnose anything with your hard drive. Just use it for RAM. (Be warned, as their is an incompatibility with Tiger that can ruin your drive. Though I see you have Leopard, so don't even know if it works).
The other test you can do, as suggested by many of the top users in these forums is "Rember" which tests your RAM and should let you know what's going on. I used it once after using it as a suggestion (taking someone else's suggestion and using it for my own testing) and it showed the second module of memory that I bought on eBay--the one that doesn't cause kernel panics--to pass.
You can find that here: [http://www.kelleycomputing.net:16080/rember>
Also, when you get your RAM replacement, I highly recommend getting Apple OEM suppliers such as modules from Samsung, Hynix, or Micron (manufactured by Crucial). They should be trouble free.
I say should because the Samsung 1GB module I bought for my 12-inch PowerBook from OtherWorld Computing has worked flawlessly for almost two years now. The one I was talking about previously, that crashed my 15-inch machine? A Samsung one as well. So, it is true that these Aluminum PowerBook G4s are picky about the RAM installed.
Message was edited by: Pismo 900
I forgot to ask you... what brand RAM do you have installed? (If you know and it is labeled).

Repeated kernel panics and graphics problems...

Hi all!
My old iMac G5 keeps on having kernel panics. Before it Panics, the display goes wierd:
http://www.flickr.com/photos/7455662@N04/4696417680/
And in the panic log it says (last 2 entries)
Sun Jun 13 08:02:51 2010
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x000000004039D34E PC=0x0000000000C2084C
Latest crash info for cpu 0:
Exception state (sv=0x286C9A00)
PC=0x00C2084C; MSR=0x00009030; DAR=0x4039D34E; DSISR=0x40000000; LR=0x00C20834; R1=0x126EBC60; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00000000 0x00C0B8E4 0x00281008 0x0007B320 0x00021668 0x0001BCE8 0x0001C0F0 0x00094318
0x00000000
backtrace terminated - frame not mapped or invalid: 0xBFFED1B0
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(3.4.2)@0xc03000
dependency: com.apple.iokit.IOPCIFamily(1.4)@0x398000
dependency: com.apple.iokit.IOGraphicsFamily(1.3.5)@0x4c6000
dependency: com.apple.NVDAResman(3.4.2)@0x4fc000
dependency: com.apple.iokit.IONDRVSupport(1.3.5)@0x4e6000
Proceeding back via exception chain:
Exception state (sv=0x286C9A00)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x286D1780)
PC=0x90007878; MSR=0x0000D030; DAR=0xE00E4000; DSISR=0x42000000; LR=0x900073F8; R1=0xBFFED1B0; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 7.9.0:
Wed Mar 30 20:11:17 PST 2005; root:xnu/xnu-517.12.7.obj~1/RELEASE_PPC
panic(cpu 0): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x00083498 0x0008397C 0x0001EDA4 0x00090C38 0x0009402C
Proceeding back via exception chain:
Exception state (sv=0x286C9A00)
PC=0x00C2084C; MSR=0x00009030; DAR=0x4039D34E; DSISR=0x40000000; LR=0x00C20834; R1=0x126EBC60; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00000000 0x00C0B8E4 0x00281008 0x0007B320 0x00021668 0x0001BCE8 0x0001C0F0 0x00094318
0x00000000
backtrace terminated - frame not mapped or invalid: 0xBFFED1B0
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(3.4.2)@0xc03000
dependency: com.apple.iokit.IOPCIFamily(1.4)@0x398000
dependency: com.apple.iokit.IOGraphicsFamily(1.3.5)@0x4c6000
dependency: com.apple.NVDAResman(3.4.2)@0x4fc000
dependency: com.apple.iokit.IONDRVSupport(1.3.5)@0x4e6000
Exception state (sv=0x286D1780)
PC=0x90007878; MSR=0x0000D030; DAR=0xE00@
Sun Jun 13 14:13:48 2010
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x000000003F88B34E PC=0x0000000000C2084C
Latest crash info for cpu 0:
Exception state (sv=0x286D9C80)
PC=0x00C2084C; MSR=0x00009030; DAR=0x3F88B34E; DSISR=0x40000000; LR=0x00C20834; R1=0x1275BC60; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00C153A0 0x00C0B8E4 0x00281008 0x0007B320 0x00021668 0x0001BCE8 0x0001C0F0 0x00094318
0xE2946D5D
backtrace terminated - frame not mapped or invalid: 0xBFFED1B0
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(3.4.2)@0xc03000
dependency: com.apple.iokit.IOPCIFamily(1.4)@0x398000
dependency: com.apple.iokit.IOGraphicsFamily(1.3.5)@0x4c6000
dependency: com.apple.NVDAResman(3.4.2)@0x4fc000
dependency: com.apple.iokit.IONDRVSupport(1.3.5)@0x4e6000
Proceeding back via exception chain:
Exception state (sv=0x286D9C80)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x00F58780)
PC=0x90007878; MSR=0x0200F030; DAR=0x0031DE20; DSISR=0x40000000; LR=0x900073F8; R1=0xBFFED1B0; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 7.9.0:
Wed Mar 30 20:11:17 PST 2005; root:xnu/xnu-517.12.7.obj~1/RELEASE_PPC
panic(cpu 0): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x00083498 0x0008397C 0x0001EDA4 0x00090C38 0x0009402C
Proceeding back via exception chain:
Exception state (sv=0x286D9C80)
PC=0x00C2084C; MSR=0x00009030; DAR=0x3F88B34E; DSISR=0x40000000; LR=0x00C20834; R1=0x1275BC60; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00C153A0 0x00C0B8E4 0x00281008 0x0007B320 0x00021668 0x0001BCE8 0x0001C0F0 0x00094318
0xE2946D5D
backtrace terminated - frame not mapped or invalid: 0xBFFED1B0
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(3.4.2)@0xc03000
dependency: com.apple.iokit.IOPCIFamily(1.4)@0x398000
dependency: com.apple.iokit.IOGraphicsFamily(1.3.5)@0x4c6000
dependency: com.apple.NVDAResman(3.4.2)@0x4fc000
dependency: com.apple.iokit.IONDRVSupport(1.3.5)@0x4e6000
Exception state (sv=0x00F58780)
PC=0x90007878; MSR=0x0200F030; DAR=0x0030
Can anyone make sense of this??
Thanks in advance,
Harry

Could be the video card. Boot from the Apple Hardware Test on the Additional Software Disc that came with the computer. Run it several times in Extended. Write down any error you get. Might take a long time to finish, depending on how much RAM you have installed.
+Using Apple Hardware Test+
+Before using Apple Hardware Test, disconnect all external devices with the exception of keyboard, mouse, display, and speakers. You should also disconnect the Ethernet network cable. If you are using the MacBook Air, you may need to connect the MacBook Air SuperDrive. Print out these instructions before proceeding with the following steps.+
+1. Restart your computer, holding down the “D” key while the computer restarts.+
+2. When the Apple Hardware Test language chooser screen appears, select the language appropriate for your locale, and press the Return key or click on the right arrow button.+
+3. If your computer is not supported by this version of Apple Hardware Test, an error dialog will be displayed. You should Shut Down the computer, locate the correct DVD containing Apple Hardware Test for this computer, and repeat the above steps.+
+4. If your computer does not restart to Apple Hardware Test:+
+a) Restart your computer with the DVD containing Apple Hardware Test. This should be the same DVD this document resides on. Hold down the “D” key while the computer restarts.+
+b) If your Mac has a Firmware Password enabled you need to disable it first using the Firmware Password Utility when booted from the Mac OS X installation DVD.+
+5. When the Apple Hardware Test main screen appears, follow the onscreen instructions.+

Audio drop outs and continuing problems- Apple Support informed again.

Hi All,
Have had various audio problems with iMovie transfer to iDVD 6. iMovie had the problems initially but a weird trick seems to be helping me.
Copy a random new audio track into my film, paste it, then cut it out then empty trash..... all of a sudden my audio is clean again and perfectly in time with the video. I have informed the iMovies people in Ireland and they are at a loss to explain why this is now ok.
BACK to the plot and iDVD 6.
When I try to export this project from iMovie in iDVD 6 it either becomes an audio garbled nightmare or if I try and import into iDVD 6 I get audio that gradually becomes out of sync with the video visual. I know that this project was recorded in 16 bit audio so no joy there.
I've told Apple in Ireland that there are major audio issues with iDVD 6's audio set up + something they were apparently unaware of. I was assured that the tech dept's would investigate and solve. I am really surprised that they hadn't seen this problem in this forum!!
In the meantime any advice is very gratefully received. I'm on an Intel G5 Imac with 1.83ghz 1Gb sdram and 250 GB HD. So Software is currently limited!! I desperately need to get this project to DVD!!!!
Many thanks,
GUY

SAME EXACT THING HERE. This is what I posted in a diff thread:
2013 iMac 1TB Flash Drive
OS 10.8.5
Constant audio drop outs using Apogee Duet. I have to unplug and replug several times to get the system to recognize it. Sometimes when it is connected, Audio Prefs doesn't even recognize it and it shows up as "Unknown". When I click Audio Prefs before I get in, I get the spinning beachball and it takes a while for it to open. I have been in touch with Apogee but to no avail. It seems to work on my 2013 Macbook Pro, but I haven't tested extensively. It seems to get tripped up if I'm working in Ableton and get a Facetime call or if I try to use Youtube / Soundcloud. The system gets noticebly slower. When I switch back to Ableton, Duet is recognized (sometimes not recognized at all) but I cannot play anything inside the project window.
Not sure what to do at this point

Dock and Graphics Problems -- Vent?

I have a 24" iMac that I purchased back in April. It has worked great with no issues until now.
After installing the Ventrilo chat client, I began having issues with the graphics. The dock will not appear unless I click in the area it's supposed to pop up in, magnification on dock icons stopped working, items in the menus won't highlight, and I'm having problems with javascripts in my web browser.
I deleted the Ventrilo client, emptied the trash, and restarted. Things were back to normal. I reinstall Vent, and everything is fine until I restart, and it begins happening again. I've had to reinstall Vent 4 or 5 times. And now the restart isn't even helping.
This isn't a serious issue, but I'm worried that it is indicative of worse problems, and it's annoying.
Any ideas on how to remedy, or at least what the problem is?

HI and Welcome to Apple Discussions...
Are you absolutely sure Ventrilo is compatible with Leopard?
http://www.ventrilo.com/download.php
That links says 10.4 or higher but it doesn't say anything about 10.5.
You might try and get help here at their forum. http://www.ventrilo.com/forums/
Carolyn

Macbook Pro 10.6.8 -Minor start up issues and graphical problems.

Hey guys, I have a Macbook Pro 10.6.8. I have had this computer since Christmas 2010 and I am pretty sure it was made in mid 2010. In the time I have been using it, it has run smoothely and worked very well overall. However, in the past few months I have noticed a few odd things when starting up the computer.
These things include:
- My current desktop image is sometimes replaced with the one I had before.
- Sometimes the white loading screen with the apple logo will show for around 5-10 minutes before the computer fully starts up
And within the past week, I have seen a few other odd occurances:
- The graphics seem to lag at times, like when I'm typing, after I hit the keys it takes a bit more than an instant (like normally) for the letters to appear.
- A few days ago, in Safari, I got a colored pinwheel that just wouldn't go away. It also seemed like it was affecting the whole system, because when I tried to force quit, it took about 2 or 3 minutes for the menu to come up after I right clicked the Safari icon.
- Some programs taking a few seconds longer than normal to start and respond.
And just last night, this happened:
- I shut the computer and tried getting back on an hour later. When I opened it back up, there was an unresponsive black screen and the sleep light stayed lit instead of blinking.
I am becoming increasingly worried something is seriously wrong with my machine and I appreciate any help you can provide.

Hi,
Do you have all the updates installed? If so, I think you may need to do some maintenance on your Mac. Some caches to clean, some permissions to repair, etc... You can either use Onyx (here, just make sure to download the right version, not the Lion one: http://www.macupdate.com/app/mac/11582/onyx) when your session is running, but it takes some getting used to.
Alternately, you can install a small utility called AppleJack (here: http://www.macupdate.com/app/mac/15667/applejack), but it has to be run in Single User mode, by holding the Command and S keys down on startup. After that, you just type "applejack AUTO restart" (without the quotes, and that's a caps-on AUTO), then hit Enter, and let AppleJack do its job. Will take some time for your Mac to boot after that, but you should find a more usable machine in the end.

Satellite P200D-11R sound and graphics crash after waking up from sleep mode

Hi,
I am wondering if anyone here has had similar experiences to mine (below) or can offer any solutions.
I have upgraded my P200D-11R OS to Vista 64 Ultimate to take advantage of the extra performance. I also add that the BIOS has already been updated to version 1.4.
Well, everything works fine with the standard 2Gig of RAM which the laptop was supplied with originally, however, when I upgrade the RAM to 4Gig (2 x 2GB Samsung 667mHz modules), sound and graphics problems appear every time the machine is brought back from sleep mode.
The sound card makes a very laud fuzzy noise every time it wants to play a sound and the graphics produce lots of horizontal lines on the screen. I then just have to restart the machine which means loosing all my unsaved work.
Everything works fine as long as the machine does not enter sleep mode. I have currently disabled the sleep mode to prevent the machine from entering it but I am finding life very hard without it.
I am very surprised and also disappointed at the fact that Toshiba did not test these machines with Vista 64 Ultimate and 4Gig of RAM!
Extra info:
The memory is the same Samsung type as the 1Gig modules supplied by Toshiba originally with the machine, and the part number Toshiba recommends.
I have tried installing other (more recent) device drivers by Realtek and ATI without any improvements.
The memory modules pass all tests and are not defective. They have also been tested on my friends Dell notebook with no problems even in sleep mode.
I have installed my friends Dell 2Gig memory modules in my P200D and they too produce exactly the same results with post-sleep crashes.
My thoughts are that this must be another BIOS issue unless anyone can shed some light on the issue from another angle.
Please help! Many thanks in advance.

Hi Sascha
Since you are running a Vista 32bit version, the upper limit of the memory recocnised by the machine is 3.2gb which is the maximum a 32bit operating system can address and use. The diffrence here is that I also upgraded my OS to Vista Ultimate 64bit to get yet better performance out of the 64bit dual AMD processor.
3.2gb of RAM on 32bit OS does not necessarily increase the performance. However, it keeps the performance stable when you open many more programs at the same time since the machine has more RAM to play with before staring to use the much slower hard drive as operating memory (Page File), to keep all thoes open programs running.
A 64bit OS such as Vista Ultimate 64, recognises the whole 4gb of RAM and much more (for instance, 8gb with 2 x 4gb RAM modules). The 64bit OS itself would generally consume more RAM to start with, however, with 4gb I found the general performance to be much better. Going back to the problem however, my P200D-11R with Ultimate 64 and 4gb RAM refuses to wake up from sleep mode gracefully and the graphics and sound crash every time, forcing me to restart.
My feelings at present is that eventhough your machine may be slightly different, I bet if you upgrade your OS to 64bit, the machine will start recognising all of the 4gb of RAM and post-sleep crashes will start to appear!

GeForce FX5200 - big problem

Sorry for my English, it's not my native language.
1. I can't even start my OS. It's the graphic card problem for sure, because when I'm changing it for any other card it works fine. Ok, so when my OS (XP) is loading, my monitor just turns off and the led is blinking. All what can I do is reset or turn of the computer. There was no fan on the vga when I bought it (2 years ago). It was working excellent. And now I can't even run my OS.
Does anyone of you know what's the problem ?
2. Second problem - tvout. When I connect my tv, screen on tv is weird, I don't know how to describe it but it looks like the colours are brightened. I can't do anything with it, I was trying some setup but nothing works. It was working good too, but it screwed up much more sooner then my first problem. :D
MSI GeForce FX5200 128 mb, DVI, tvout
nVidia Drivers
Thanks in advance for the replys.
Pawel

Quote from: ivangelion on 18-June-06, 05:01:18
you can try, use fail safe mode, pressing F8 when booting, then set to start in failsafe mode with vga, then if you can get in to windows then go to video properties and change the refresh frecuency to 60hz in any resolution and restart, if do not work do it again in fail safe mode (no vga mode) if the last thing you see is the windows logo with the loading bar then the problem is monitor out of refresh values, that turn of the monitor, another thing may be if you conect a tv like a monitor without your pc monitor, sometimes the main monitor is set to tv so when start windows the pc monitor turn off, if you can see something in your tv then you must change to "clone view" the multidisplay setting
ok mi english is not good too so i hope to help you in some way
true but that dont explain --> "I was able to start an OS, but in the game it crashed again."

HP Envy 15 Graphics Problem with Windows 8.1 (Intel and NVidia Graphics). Help!

I bought an HP ENVY TouchSmart 15-j013ea about 6 months ago and I have had a major problem with the graphics that I cannot seem to solve. I think it started when I updated to Windows 8.1, even though I am not 100% certain.
I have noticed the following three problems, and I think they are related:
Some windows (such as Chrome, Skype, or even Device Manager or other windows) are very blurry compared to others.
The firefox menu window has some deformed black arrows instead of the normal ones.
When playing a game (specifically, Star Wars the Force Unleashed 2), after a while I get an error that the computer has ran out of memory. However, according to task manager, only about 50% is in use, not to mention that I have 8 GB of RAM + 2 GB graphics memory. At the same time, the computer gets rather loud (like a fan working overtime) and hot.
The laptop has both Intel and NVidia graphics, and both are enabled in Device Manager. To be honest, I have no idea which is used when, or how to check that (let me know if there is a way)
I have tried the following without success:
Uninstalling the Intel graphics driver from device manager and installing a version I downloaded from the HP website for my laptop and OS. After that, Windows would NOT BOOT, and I had to do a system restore.
Uninstalling the Intel graphics from Programs and Features, and installing 2 different versions from the Intel website. Nothing changed.
Updating Nvidia driver through GeForce Experience. Nothing changed.
Updating Intel drivers from Windows Update. Nothing changed.
Quite frankly I am not sure what the problem could be, since the graphics versions are supposed to be compatible with WIndows 8.1. I also don't get why some windows are blurry and others are not. I am thinking the computer uses only the Intel graphics and not the Nvidia (at least in the blurry windows), but even if that was the case (and it shouldn't be), I don't think I should be having this problem.
At this point, I really need help. My graphics details are:
Intel HD Graphics 4600: Driver version: 10.18.10.3412
NVidia GeForce GT 740M: Driver version: 335.23
NVidia GeForce Experience version: 1.8.2
I am attaching screenshots that show driver details and the problems.
Thank you.
Blurry Chrome:
Firefox menu problem:
Device Manager and driver windows are also blurry, both graphics are shown

I had a similar problem with a Dell laptop. I found the problem was the laptop wanted to switch between the Intel and NYIDIA video cards. It would switch to the Intel when high graphics was not required then to the NIVIDIA when high graphics was required. The laptop does this to save power when high graphics is not required but it caused problems with some applications, specifically high graphics games.
For me the solution was to disable the Intel graphics processor. You can do this by right clicking on your Wallpaper, select the NIVIDIA Control Panel, then select Set Physx Configuration. You will see a dropdown box labeled Select Physx Processor. It is set to Auto by default. This allows the switching I described. Select this dropdown box and select your NIVIDIA processor. This will prevent the laptop from switching and force it to use your NVIDIA processor exclusively.
Hope this helps.
Sacto Fred
Owner and CEO
H&O PC Soultions

New iMac freezing, showing Graphics problems and Wifi Problems on 1st Day

My sister just received her new iMac - 20 inch - 500 GB drive.
I started seeing problems during the download of the FIRST software update from apple. There was a black box in the lower left corner of the software update window where it should have been grey (or metal).
On reboot, I also occasionally show weird flickering graphics in the lower right of the login screen.
My new iMac also frooze about 4 different times during the installtion of various updates during the first 4 hours of use. Mouse and keyboard would not work. Once it frooze at the login screen after clicking on the user name.
I also had wifi issues. After three hours of use, my STRONG wifi connection was lost. Moreover, I could not see any other wifi stations. (normally I would see 5 other wifi access points from my sister's neighbours). After reboot, the other wifi access points would appear including my sisters but I could NOT connect to my sister's wifi access point. It said I had an error. I checked the keychain and it showed the right key/password for my sister's wifi AP. I had to run Mac Network Diagnostics and reset wifi to get things working again.
It sounds like a sick iMac. I know others have experienced freezing. But given all these problems, should I ask for a new imac?
Rob
P.S. My sister got AppleCare as well. Maybe that was a good thing...

I had a long chat with Apple Support. It would appear that Apple's policy is not replace the computer unless it can be determined that it is a hardware problem (even though my problems started to appear right out of the box before I even had a chance to download any updates). According to the Apple product specialist, sometimes there are bad installs of the OS at the factory.
Apple wanted me to format the drive and reinstall the OS.
Fortunately, I did not have to reinstall the OS! I started to see graphics problems when I was asked to run the Disk Utilility off the Install DVD (so I could format the drive). So clearly there was a hardware problem.
In retrospect, I really wish there was an Apple Store nearby to buy Apple computers. I am sure the store manager would not ask me to go home and reinstall the OS etc and try again when the computer doesn't work properly out of the box.
Those who have Apple Stores nearby do not know how lucky they are!

FX5200 tv-out problem

Well, direct to the subject.
When I connect my TV to computer, all the graphics shows perfectly, games, windows desktop, DVDs, everything appears with no problem. But, when I try to play any DIVX, the screen on the TV stays black, while in the computer the movie plays normally.
Does anyone can help me??
I bought the video card only to watch movies at TV and I can´t!!

yes take the card out and shoot it..ive got one and its pooh..
do wat im doin and upgrade to a better card the MSI FX5600-VTDR128 seems to get good reviews for a meager price...other than that dont know

Clearing Graphics and Sprites problem

Thanks to Andrei1 for his help previously. Another problem in the same application. Just having problem clearing sprites and graphics. Commented out the clear statements below. Ends up showing nothing. Do I need to create a separate function for initial and then updated values?? Thanks in advance for any help. Hope the code is not to long.

I think you need to listen to CHANGE event on user input items. Events may be different though:
ComboBox - CHANGE,
InputText - has CHANGE or TextEvent.TEXT_INPUT - depending on your needs
CheckBox and RadioButton dispatch CHANGE event
So the code can be as following:
import flash.display.Sprite;
import flash.geom.Point;
stop();
//Set up global variables
//Set initial selectable Values
rbMonth.selected = true;
rbRisk1.selected = true;
rbYears10.selected = true;
// declare color of graph
var graphColor:uint = 0xCC6600;
//Set variable Group Names
var timeValue:Object = rbMonth.group;
var riskValue:Object = rbRisk1.group;
var yearsValue:Object = rbYears10.group;
var answerCurr:Array = new Array();
// it may array of points
var points:Array = new Array();
var gr:Graphics = this.graphics;
gr.lineStyle(1, graphColor, 0.5);
var i:int = 0;
// no need for enter frame event listeners
//addEventListener(Event.ENTER_FRAME, initSum);
//addEventListener(Event.ENTER_FRAME, drawPoints);
// add change or other corresponding events to UI
num2.addEventListener(Event.CHANGE, drawPoints);
num1.addEventListener(Event.CHANGE, drawPoints);
timeValue.addEventListener(Event.CHANGE, drawPoints);
riskValue.addEventListener(Event.CHANGE, drawPoints);
yearsValue.addEventListener(Event.CHANGE, drawPoints);
// initial settings
initSum();
//Calculate initial set values
function initSum(event:Event = null):void {
     var Dinit:Number = num2.value;
     var Pinit:Number = num1.value;
     var Cinit:Number = (timeValue.selectedData) * Dinit;
     var Rinit:Number = riskValue.selectedData;
     var Yinit:Number = yearsValue.selectedData;
     //Compound Interest P = Starting principal, C = contributions/year, R = interest rate as decimal.
     //P(1+R)Y + C[((1+R)Y+1 - (1+R))/R]
     //Formula converted intoActionscript = P*(Math.pow((1+R), Y)) + C*(((Math.pow((1+R),Y+1)) - (1+R))/R); break formula into separate parts
     var firstPartInit = Pinit * (Math.pow((1 + Rinit), Yinit));
     var secondPartInit = Math.pow((1 + Rinit), Yinit + 1).toFixed(2);
     var thirdPartInit = 1 + Rinit;
     var answerInit = firstPartInit +Cinit * ((secondPartInit - thirdPartInit) / Rinit);
     var answerInitFinal = answerInit.toFixed(0);
     commaCoderInit(answerInitFinal);
     // first call to draw points
     drawPoints();
//Format initial end result with commas
function commaCoderInit(yourNum):String {
     var numtoString1:String = new String();
     for (i = 0; i < yourNum.length; i++) {
          if ((yourNum.length-i)%3 == 0 && i != 0) {
               numtoString1 += ",";
          numtoString1 += yourNum.charAt(i);
     return result1_txt.text = numtoString1 + " €";
//Draw Current points on graph
function drawPoints(event:Event = null):void {
     var Dcurr:Number = num2.value;
     var Pcurr:Number = num1.value;
     var Ccurr:Number = (timeValue.selectedData) * Dcurr;
     var Rcurr:Number = riskValue.selectedData;
     var year:Number = yearsValue.selectedData;
     var firstPartCurr:Number;
     var secondPartCurr:Number;
     var thirdPartCurr:Number;
     //Calculate Max value and ratio
     var firstPartMax:Number;
     var secondPartMax:Number;
     var thirdPartMax:Number;
     var answerMax:Number;
     var ratio:Number;
     var firstPartMax:Number;
     var secondPartMax:Number;
     var thirdPartMax:Number;
     var answerMax:Number;
     var ratio:Number;
     // point sprite
     var point:Point;
     //Create value loop array
     for (i = 0; i <= yearsValue.selectedData; i++) {
          firstPartCurr = Pcurr * (Math.pow((1 + Rcurr), i));
          secondPartCurr = Math.pow((1 + Rcurr), i + 1).toFixed(2);
          thirdPartCurr = 1 + Rcurr;
          answerCurr[i] = firstPartCurr + Ccurr * ((secondPartCurr - thirdPartCurr) / Rcurr);
          //Calculate Max value and ratio
          firstPartMax = Pcurr * (Math.pow((1 + Rcurr), year));
          secondPartMax = Math.pow((1 + Rcurr), year + 1).toFixed(2);
          thirdPartMax = 1 + Rcurr;
          answerMax = firstPartMax + Ccurr * ((secondPartMax - thirdPartMax) / Rcurr);
          ratio = (answerMax).toFixed(0) / 250;
          // now it is Point - not Sprite
          point = new Point(25 + i * (550 / yearsValue.selectedData), 675 - (answerCurr[i] / ratio));
          points.push(point);
     drawLines();
//Draw initial lines on graph
function drawLines():void {
     gr.clear();
     gr.moveTo(points[0].x, points[0].y);
     for (i = 0; i < points.length; i++) {
          gr.beginFill(graphColor);
          gr.drawCircle(points[i].x, points[i].y, 3);
          gr.endFill();
          gr.lineTo(points[i].x, points[i].y);

GeForce-FX5200 tv-out and graphic problem...

Similar Messages

Maybe you are looking for