Geforce FX5600-VTD 256mb DDR (motherboard help)

hi all
I want to get a msi Geforce FX5600 but i need to know if my k7t266 pro2ru can run it also i have been looking at the msi fX5900 vtd . could someone please help
thanks
fdisker

yes at agpx4 not 8 of course,not that that matters a lot

Similar Messages

MSI GeForce FX5600-TD 256Mb Tv-Out, DVI

Hallo!
I have a AND XP 2000+, 512 DDR 266, MSI KT3-Ultra, MSI GeForce FX5600-TD 256Mb Tv-Out, DVI
and a 450W psu. Win XP Professional sp1
I have a problem with games and when i tested in 3dMark.
It's score bad.
3dMark2003: 2312
All drivers are up to date and i have tried to reinstall all components
Can Somebody help me Please? ;(

sorry but the only way you will improve your score is to lose the MSI FX6500. This is a renault 5 in ferrari clothing. It simply does not have the necessary fill rate to compete with even a Ti4200, trust me I spent 2 weeks trying to get it running to spec.
Basically only an Ultra or FX5900 will improve it.
Nvidia boobed on the design of the Graphics processor, the card can throw out frames well beyong a ti4200 capability but because it cant fill them quick enough it cant maintain the framerate.....still dont believe me ? Try thi, run 3d MARK, any version, in 640X480, youll notice that the score doesnt improve dramtically. 640X480 should mean more FPS but still no fill rate so it cant process any quicker.
I am well pi**ed of with my FX5600.

MSI GeForce FX 5600 256MB DDR with BIG FAN!

Hi,
I was thinking in buying a new video card and a MSI Geforce FX 5600 256MB DDR is a very good choice for me, but i realised that despite the fact, that its a 256MB DDR running at 400Mhz, compared with the 550Mhz of the GFFX 5600 of 128MB DDR and i was thinking in buying a bigger cooling solution to replace the bundled one with the card. So i could overclock the mem frecuency at 550Mhz. So my question is, do you know of a good and not so expensive cooling solution for the card??.

Companies like Zalman and Vantec has to offer some nice and quiet cooling solutions.See video card's RAM specs for that kind of o/c.

GF FX5600 256MB DDR AGP DVI VO

GF FX5600 256MB DDR AGP DVI VO please, help can stick one of these into my board k7n2g ilsr, i know this board has 4x agp but is this msi GF FX5600 256MB DDR AGP DVI VO compatable or is only 8x

marcus-maximus,
The 8X motherboard K7N2G-ILSR and the 8X GeForceFX 5600 are both compatible with eachother, especially since they are both 8X AGP.
Take Care,
Richard
P.S. 8X anything will run at 4X too.

Geforce FX5600(256MB) Questions

Hi,
I just purchased the GeForce FX5600 card model number FX5600-VTDR256 and have some questions regarding the card.
I have already read through the forums and could not find any answers so here's a new post.
I wanted to know 3 things.
My First question:
On the back of the box it says E3:Fan Speed Monitoring and Warning
I can't find the software through with which I can monitor the fan speed and
temperature of the card.
Please help!
My Second question:
My card has a Video_In option, I managed to attach my TV and the card through the Video lead and now I can Watch TV through the Media Center in WinXP.
Now is there a way to surf channels since my TV doesn't support S-Video
leads and the Video lead doesn't surf channels.
My cable TV doesn't come with a digital box or anything, I just get a RF connector lead that goes in the back of the TV and I scan for channels through the TV.
My Third and last question:
When I install the Media Center II in Windows ME, at the end of the
setup I get an error message saying the WINDex.dll failed to self-register.
Afterwards when I run the program in Windows ME, I get a Director Script
error and have to quit the program.
Could anyone please guide me as to what I should do.
Please help me out, especially regarding the temperature problem and the
Media Center problem in Windows ME.
Product
FX5600-VTDR256

My First question:
On the back of the box it says E3:Fan Speed Monitoring and Warning
I can't find the software through with which I can monitor the fan speed and
temperature of the card.
Please help!
It should be in the nVidia settings under the advanced button and the slide out menu, should be the last one down, called temperature settings. You could try using the 3d Turbo Experience but it can be troublesome and bulky. I prefer to use Drivers from nVidia and the Coolbits Registry hack for the clock features
My Second question:
My card has a Video_In option, I managed to attach my TV and the card through the Video lead and now I can Watch TV through the Media Center in WinXP.
Now is there a way to surf channels since my TV doesn't support S-Video
leads and the Video lead doesn't surf channels.
My cable TV doesn't come with a digital box or anything, I just get a RF connector lead that goes in the back of the TV and I scan for channels through the TV.
Don't really know the answer to that for sure but I would try using a VCR as your tuner and use the VCR's remote to surf. Perhaps someone's got a better answer ?(
My Third and last question:
When I install the Media Center II in Windows ME, at the end of the
setup I get an error message saying the WINDex.dll failed to self-register.
Afterwards when I run the program in Windows ME, I get a Director Script
error and have to quit the program.
Could anyone please guide me as to what I should do.
Have you been here to download the latest?
http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=446
It only says XP 2000, I have looked on every page but all the links point to the same file, it is an upgrade to Version 3, Maybe it will work, if not I will ask if there is an update for ME.

Performance Problems with GeForce FX 5600 256mb Video Card

I recently purchased the GeForce FX 5600 VTD 256mb video card to replace my old ATi Radeon 8500 64mb card. I'm running an AMD 2800XP+ on an MSI K7N2 Delta-L, with 1gb of PC 2100 on Windows XP Pro.
I installed the latest drivers (from the EGA site) and ran 3DMark 2001 SE. My score for the old card (a 64mb card) was about 9200. My score for the new 256mb card is only 8700. My roommate has a GeForce 4 TI4600 128mb video card. We put his card in my computer, and I scored 11117. According to PCStats.com, the FX 5600 128mb version scored about 11000.
I've tried everything I can think of to ensure my video card is working properly, but I still get low scores. I don't know if I'm missing something somwhere, but there has to be a way to get more performance out of the video card. Can anyone help me out here?

Yeah, I've ran the driver cleaner after changing each driver. And I've tried several drivers with the new card. I've even changed the clock settings a bit, which has helped bring the scores up to around 9000. Still way off from the GeForce 4 or the 128mb version of the 5600.

GeForce FX5600-VTDR128

Hi,
I've been looking around for a new GFX card, I was looking for a 256MB card, but noticed the MSI GeForce FX5600-VTDR128 which came with a remote control. The remote sortta got my attention as I noticed it connects to the TV-Out socket (if there is a 256MB card I've missed could you please let me know, thanks!).
My question: Using the software and calbe that comes with the card (nice software bundle too!) can you use the remote on other (MSI and non-MSI) cards that have the TV-Out socket?
Thanks for any help,
Pete

Hello:
sorry my english, I speak in spanish.
I brought this card a mounth ago, the remote controller is not a greatest thing in the world, this is very complete, it has a lot of functions, but the software blunde (included or feature) is to bad, is not fast. I think that I can use the remote controller for everything, but it is not (or I don´t know how do)
The card have a remote controller sensor with a wire. The conector of this wire is ONLY for this card (or another MSI, but not all MSI).
I hope help you, if you still have questions, write to me [email protected]
Sebas.
I have a question too,
Is posible to sintonize (tuning) the diferent channels with this card?
Grettins.
SEBAS

MS6167 - Problems with NVIDIA GeForce FX5600 graphics card

Hi all,
tried to install a Nvidia GeForce FX5600 old PC of mine that the kids use, mobo is MS-6167. Could not get this to work. States that it cannot get enough resources (in Windows XP, Device Manager). I have tried to force reasign of IRQ from the BIOS on reboot, and even removed the sound card.
Could this be a power issue, though I assume the card would just not work or crash.
Any help apprecaited.
Thanks,
Bunnster

"AMD's 750 Chipset
Power users looking for next-generation features such as AGP 4X /my marking/ and PC133 SDRAM support are currently out of luck on both AMD's Slot A and Intel's Slot 1 infrastructure, as chipsets that support both features are in the latter stages of sampling among motherboard manufacturers. Before a motherboard can tout such features, the motherboards' chipset must support them. All Athlon motherboards currently available ship with AMD's 750 chipset, which only officially supports PC100 SDRAM and the AGP 2X interface."
Source: http://www.firingsquad.com/hardware/6167/default.asp
Ad libris: Meaning, I don't think your Nvidia card can do AGP 2X. Bad news could be you'll have trouble fitting the previous card. Your best bet would be to get a powerful PCI-slot only card.

Why can't I use my mid 2010 macbook pro with 8GB memoir and NVIDIA GEForce GT 330M 256MB to run 3D in photoshop CC?

Why can't I use my mid 2010 macbook pro with 8GB memoir and NVIDIA GEForce GT 330M 256MB to run 3D in photoshop CC?

3-D is very memory intensive.
System requirements | Photoshop
Mac OS
Multicore Intel processor with 64-bit support
Mac OS X v10.7, v10.8, or v10.9
2 GB of RAM (8 GB recommended)
3.2 GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
1024x768 display (1280x800 recommended) with 16-bit color and 512 MB of VRAM (1 GB recommended)**
OpenGL 2.0–capable system
Internet connection and registration are necessary for required software activation, membership validation, and access to online services.*
** 3D features are disabled and some Mercury Graphics Engine enhanced features may not work with less than 512 MB VRAM. Read the Help article.
Bottom line, you don't have enough VRAM
Nancy O.

XFX Geforce 6800 GT 256MB AGP8X

I have seen this XFX Geforce 6800 GT 256MB AGP8X,on http://www.amazon.co.uk/exec/obidos/ASIN/B0002ZDRTE/202-3146470-7675026
Has any one used this card,from XFX,or any Xfx graphic cards,Have you had any problems with it,eg power supply issues,or warrinty.
Has any one used a Geforce 6800 GT 256MB AGP8X,from any MANUFACTURE,if so
could you give details,thanks (to fit a K8N Neo Platinum)
Thanks for the help
from dave jnr

Quote from: Doggy on 05-November-05, 14:35:53
lol
I have already smacked myself on the nose with a rolled up newspaper for my current AGP configuration. Now I just have to pick the mb and the video cards (2 x 7800's) to go in it. . .
doggy
Heck, I was kicking myself last year for not getting SLI... not too long after I bought my Neo.
Don't get me wrong, my Neo2 has taken all the abuse that I've thrown at it without a hiccup. I just thought at the time that AGP still had some more life just because so many people were still using it.
The marketing powers that be have decided otherwise & are "forcing" the switch. Now it seems that the decent AGP cards that are still available are selling at a premium compared to their PCI-e counterparts... and they won't be around much longer. If I could still get a "current tech" AGP card at a competitive price, I'd probably do it.
Just the price of "progress", I guess.
For me now, it's the matter in which order my upgrade is going to go.... Buy an X2 now, in anticipation for the new board/card or new board/card now & keep the "old" CPU...?
Decisions, decisions.... Yup... new thread coming on!

Monitor for geforce fx5600

Hello to all
I have a vid card MSI Geforce FX5600 VTDR128 and a monitor that alone it resists up to 800 x 600.
I want to modernize my monitor, what monitor do you think I should buy crt or lcd?
Byron

CRT definitely if you're going to be playing games. The main drawback with LCDs at the moment apart from price, is that you're stuck with one resolution which is usually about 1280 x 1024 even in a 17" screen. I've just bought an EIZO T966 21" CRT which although pricey (it cost me €999) compared with say an Ilyama at around half that price, has many more features. One of the problems I can overcome with this monitor is to automatically resize the display area of MP games that run in 1024 x 768 with anti-aliasing options enabled. If I were to run them in the same resolution as my desktop settings, I would lose the anti-aliasing features. For the benefit of the uninitiated, anti-aliasing adds grey in varying degrees of lightness to the edges of images so that the jagged effect that you normally see is smoothed out. You can't do those things with an LCD monitor though because of the way the liquid crystal performs. Some useful info on the subject here

GeForce FX5600 128 - Causes BSOD and STOP Error

Hi everyone,
I recently upgraded my Fathers computer from Win ME to XP (SP1), and I now cannot run Microsoft Flight Simulator 2004. It ran perfectly under ME, and I haven't changed any hardware during the upgrade.
As soon as the game starts (plane on the runway) I get a blue screen and a 'STOP' error: *** STOP: 0x00000050 (0XC967C967, 0X00000000, 0X8053CDD1, 0x00000000)
By turning off all 3dfx functions in the game settings, or by turning off hardware acceleration in Windows we have managed to get into the game, but the graphics are poor and so slow its unplayable.
Apart from this, the system is working perfectly with no other problems when running normal windows apps. I have no other games to try the 3dfx functions on.
The hardware configuration is:
GeForce FX5600 128 graphics card
512 mb RAM
AMD Athlon 1.4Ghz processor.
The software configuration is:
Direct X 9b (same version as was being used to run the game under ME)
Nvidia drivers tried:
Nvidia VGA Driver 61.77 for Win XP/2000 (not WHQL)
Nvidia VGA Driver available through windows update (WHQL – though I can't remember the driver number)
Also tried an old driver 43.?? that came with the video card. The problem is always the same.
I have run dxdiag and initially it told me that the 61.77 drivers were not WHQL certified. After then running windows update it downloaded a driver which shows as WHQL certified (I do not know the version of this driver), I ran dxdiag again, and the system reported no problems. I successfully completed all direct draw and direct 3d tests under the dxdiag program, with no problems reported.
I have been in contact with Microsoft FS9 support initially, who later passed me to the operating system department as they had no luck in finding the fault. They tell me its a hardware issue and I should contact the manufacturer.
So far I have tried creating a (completely bare) parallel Windows XP installation and running the game in that, again the same problem occurs.
Does anyone have any suggestions on what I can do to resolve this problem? I have an opportunity this weekend to remove XP and go back to ME, which I am planning to do unless anyone has any thoughts on how I might fix this issue?
Many thanks in advance, John

Been running the Memtest86+ overnight on one stick and it came up with some 1690 errors...
Just stuck the other in now and leaving it run for a couple of hours... Not holding my breath though. Already sent my supplier an email to expect them in the post for a refund. Time to go down the old branded RAM route. Any suggestions for rock solid RAM that won't break the bank?
Thanks once again fellas,
Niels

MSI GeForce NX6600GT VTD AGP display problem

Hi!
I have MSI GeForce NX6600GT VTD AGP installed on ABIT NF-7S 2.0 (latest bios) with Athlon XP 2400+. Power supply 350W.
I had radeon 9200 running without problems, but if i install 6600gt, monitor goes on standby. It looks like monitor receives no signal from graphic card.
But computer boots normally - I can even log on to Windows! (log on sound from speakers when i enter password)
PS is rated 13A at 12V. Fan on 6600gt IS working.
Mark.

Hi!
Tried card in 2 different computers with same results. Seems that card was DOA
Mark.

Problem GeForce FX 5200 T128 DDR

My video card is MSI GeForce FX 5200 T128 DDR
I have a problem in games - eg. if i'm playing GTA III (Vice City) when
i play a few min.
everything are mixed up with everything. Buildings, road, grass have
wierd shape and texture.
MSI GeForce FX 5200 T128 DDR
Athlon 1800+
MSI k7T266 Pro-A
256 mb

Try disabling AGP fast writes.
If you have a passively coold FX it's possible it's heating up, you should try it with the case open or with a fan over the heatsink.

Geforce fx5600 remote

hi just bought a geforce fx5600 128 from boot sale and it didnt have driver disk with it
can anybody tell me how to get the remote control to work
many thanks

try to download the driver from the web then.

Geforce FX5600-VTD 256mb DDR (motherboard help)

Similar Messages

Maybe you are looking for