Geforce GTX 570 Twin Frozr III PE/OC and BSOD

Hi,
I have an MSI Geforce GTX 570 Twin Frozr III PE/OC which appears to be causing system instability (graphical corruption upon boot i.e before windows), and BSOD. It typically occurs from a cold boot resulting in BSOD after the Windows logo. This will occur 2-3 times. The system then runs stably.
I have tracked this problem down to this card when running at x16 mode in my primary PCIe slot (slot 2, x16_1) on my motherboard. It does not occur if the card is in slot 5 (x16_2) where it only runs at x8 speed (2.5Gb/s rather than 5Gb/s). This does not occur if I place a borrowed Geforce GTX 260 in the primary PCIe slot (it runs at x16 fine and causes no such system instability).
I have tried out various mobo BIOS updates, checked all my system files, updated (and rolled back) my NVIDIA drivers, and checked my memory for errors with Memtest 86+. I cannot find any updates to my video card BIOS.
Can I assume the card is faulty, or does anyone have any other possible solutions?
Spec is:
Windows 7 64-bit
Intel I5-2500K
Asus P8Z68V-Gen 3 mobo
8Gb Corsair DDR3 1800 mem
MSI Geforce GTX Twin Frozr III PE/OC
Cheers!

Quote
Its a Corsair 750TX V2 (750 watt). I am also running 1 SSD, 2 hard drives and a blue-ray optical drive. You don't think its too much for the PSU do you?
The PSU its plenty enough
Quote
No I haven't tried it on another computer and I don't think its very likely I'll get the chance.
there is not much options then, except to RMA the card and to hope the problem to be there.
[else the problem will remain]

Similar Messages

GTX 570 Twin Frozr III POWER Edition

Hey guys,
i just got the GTX 570 Twin Frozr III POWER Edition and i love the card but it seems to run quite loud at fan speed above 48% so i made a custom fan control in afterburner
and the card runs at 71C - 75C under full load in games(crysis2, witcher 2), are those temperatures too high? if not what is the max safe temp i should be running at?
thank you =]

Quote from: Henry on 31-July-11, 05:13:04
Those temps are normal under a heavy load, nothing at all to worry about.
some people said i can lower the fan speed and just let the card run at 80C, so my last question is:
Is 80C under load an acceptable temperature to run this card at for let's say 4 non-stop gaming hours a day?
and thanks for reply ^^

MSI GTX 570 Twin Frozr III POWER Edition OC - Dual monitors IDLE higher temp

I have MSI GTX 570 Twin Frozr III POWER Edition OC, when I attached second monitor to this card temperature in IDLE mode on this card goes higher from ~38C with one monitor to around ~45-6C with second.
Card with attached two monitors do not goes in 2D mode, I readed its a nvidia bug and I should upgdate my BIOS.
In desktop IDLE mode card with attached one monitor
http://img401.imageshack.us/img401/3726/19936167.gif
In desktop IDLE mode card with attached two monitors
http://img851.imageshack.us/img851/1857/27227099.gif
My BIOS version 70.10.27.00.01
Is it available any newer bios for this card ?

Quote from: PeterMac on 10-May-12, 01:13:08
From 50MHz on GPU at idle desktop with single monitor to 770MHz!! with two monitors for what ?
to support the second monitor it seems.
read the link
http://nvidia.custhelp.com/app/answers/detail/a_id/2483

Unstable GTX 570 Twin Frozr III OC

My brand new MSI GTX 570 Twin Frozr III OC is unstable. When under load suddenly the sound hangs and the GTX shuts down for a second and the screen goes black. After this it works again. Some games can handle this, but with others I'm back @ desktop.
My rig:
- Intel i7 2600K
- Asrock P67 Pro3 B3
- Corsair Vengeance 2 x 4GB
- Cooler Master Powersupply Realpower Pro 700W Modular
I'm running Windows 7 Ultimate (64bit)
Is this problem due to the known stability issues and should I have a VBIOS update? If so which one, because GTX570 Twin Frozr III OC isn't on your BIOS update list.

Back again...
Today I installed a new PSU (Corsair GS700 single rail with 56 A over +12V) and started playing Bioshock 2 because the error used to occur the most often playing that game.
I played half an hour feeling more and more relieved when suddenly..... same sh*t happened.
Windows crash report had the following to say:
Problem signature:
Problem Event Name:   APPCRASH
Application Name:   Bioshock2.exe
Application Version:   1.0.0.1
Application Timestamp:   4d9fc504
Fault Module Name:   Bioshock2.exe
Fault Module Version:   1.0.0.1
Fault Module Timestamp:   4d9fc504
Exception Code:   c0000005
Exception Offset:   003ed2eb
OS Version:   6.1.7600.2.0.0.256.1
Locale ID:   1043
Additional Information 1:   0a9e
Additional Information 2:   0a9e372d3b4ad19135b953a78882e789
Additional Information 3:   0a9e
Additional Information 4:   0a9e372d3b4ad19135b953a78882e789
I think we can rule out that it's a PSU problem. My mobo, processor and RAM are also new so maybe the problem is not the card. I already tested the RAM with memtest with no errors.
I will try to find another PC to test the card in. Can I do something else to maybe test the motherboard or processor?

Msi GTX 570 Twin Frozr III PE/OC cooler?

I wanted to know, is this card built with nvidia's 'vapor chamber' or is that completely replaced by the twin frozr III blade cooler?

lol Svet i thought you would have known better
To thread starter;
its heat pipe based.
kinda like so
http://msi.com/pic/product/five_pictures4_2406_20110517100633.jpg

Voltage control on GTX 570 twin frozr III oc edition

Hey guys,
I can't adjust voltage in afterburner. I have it eneabled n de settings though.
Afterburner info:
Display device : GeForce GTX 570 on GF110 GPU
Display driver : ForceWare 280.26
BIOS : 70.10.27.00.01
GUID : VEN_10DE&DEV_1086&SUBSYS_25711462&REV_A1&BUS_1&D
Any ideas on how to make voltage work?
Rick

Use latest aferburner version:
http://event.msi.com/vga/afterburner/images/MSIAfterburnerSetup220Beta.zip

MSI gtx 570 twin frozr III - Dual Screen Windowed mode issues

Ok, so... I was running a solo monitor 1440x900 resolution, i recently purchased a brand new asus 24 inch 1900x1080 monitor. Basically what is happening is when i play WoW or Battlefield 3 in windowed mode on the 1080p monitor the colors are not perfect. When i go full-screen on the new monitor no issues, but that is not what i want to have to live with. When i say the colors are not perfect what i mean is, for example when i look @ the sky instead of being a smooth transition or blend from one shade of the sky to the next it is bars or stripes of each shade as if i am looking at the sky in 8 bit color instead of 32 bit color. Another thing to note is that when i login to windows 7 the blue screen where i input the password has the same effect. The 1440x900 monitor is running everything just fine. the only issue is with the 1080p monitor.
I am using DVI cabling for both, and have swapped them around to see if that was the issue, and sadly it is not. I am running the updated gpu driver, which i uninstalled and re-downloaded and installed again tonight.
When i use the HDMI cable, that fixes the issue but i need the HDMI for my 42 inch tv.
Also in windows, just to cover my bases with this post, i have the native resolutions properly configured, as well as in the game for the given monitor it is being played on.
Anyone know of a fix for this?
i7 2600k
asus PBZ68-v Pro/Gen3
Msi gtx 570
Samsung syncmaster 953bw (1440x900)
Asus VS248 (1900x1080)
I am more than happy to re-explain anything that may not be as descriptive or clear to you just let me know!
EDIT!
When i run the 24 inch 1080p new monitor as my only monitor on the system, everything runs perfectly...
Edit #2
Ok so i have pin pointed a possible cause
This msi gtx 570 struggles with operating multiple displays with different resolutions, while dual screening with my 1080p television and the 1080p display, everything runs as expected. Having to also render a 1440x900 display is probably the reason i am having the graphic issues. Is there any type of utility, setting, or other fix to this type issue? also this gpu is certainly less than 2 weeks since i purchased i could get a different card to remedy this... any suggestion? if you suggest a different card can you say so with certainty that it will work properly under the condition in which 2 resolutions will be required?

Ok, the problem is fixed and Svet i skipped a step or two. I installed the new driver with the clean install to save time for an initial attempt. What is interesting is that with the Geforce driver, only one 1920x1080 resolution was available
The msi driver gave me 2 options, 1920x1080 and 1920x1080 (native). The latter resolution fixed the issue for whatever reason.
The solution to this problem is so easy, when i purchased battlefield 3 it prompted me to download the geforce.com driver and i did not think anything of it at the time, lesson learned.

GTX 570 Twin Frozr III POWER Edition supply issues

Hi there,
I've always been a fan of MSi products, so when the time came for me to start looking for an upgrade to my current graphics card, I started looking to what MSi had in their range. After some research, the GTX 570 TFIII seems a good option for me, as it gives good performance at a reasnoble price.
Unfortunately MSi seems to have fallen off the map in South Africa. I cannot find any retailer or wholesaler to even give me an eta for 570 or 580 chipset cards in the country, and I've tried all of the suppliers listed on your site and a few that arn't listed. Is there some worldwide shortage of these models? Did the ship sink? Have MSi forgotten where South Africa is?
Any help with the procurement of these cards would be greatly appreciated. I really don't want to start importing from the U.S/Europe myself, and I'd like to get an MSi card if possible, rather than go for a different make.
regards,
Al

Welcome to the forum Alandrix.
None of us work for MSI and as such we cannot answer to the supply shortage reasons.
We are at the mercy of the importers. MSI has no official representation in South Africa and all their products are imported by these distributers who have standing contracts with MSI.
Only these importers can supply you with information as to what is on order by them and as to when thses shipments are expected.
As for bringing this to MSI's attention, I suggest you open a ticket and describe the situation to them. That is the only way that MSI will be aware of any seeming neglect with regards to product availability by their official importers/distributers. >>How to contact MSI.<<
Its unfortunately the way it is and it will remain that way until MSI decides to invest in some official representation on the African Continent.
Check your PM. I posted a local contact that may be able to assist in your query.

GEFORCE GTX 570 TWIN FROZR ll/OC GRAPHIC CARD NOT WORKING SERIAL NO::602-V255-01

I'M FRM INDIA I PURCHASED THE CARD ON 25-05-2011 THE CARD COMES WITH THREE YEARS WARRANTY AND FROM YESTERDAY THE CARD STOPS WORKING AND WHEN I CONNECT TO DVI OR HDMI PORT THE IS NO SIGNAL BUT THE FAN IN THE CARD IS RUNNING.SO I CONTACTED DIGICARE CHENNIA INDIA FOR RMA (RMA No.RTI-13215043)THEY ASK TO SEND THE CARD I SEND THE CARD AND THEY TOLD ME THAT THERE IS BURNT PCB SO WARRANTY IS NOT APPLICABLE I HAVE PAID IND 25000-/(USD 461.042) FOR THE CARD AND WITH 1 1/2 YEARS THE CARD FAILS I'M USING A GOOD POWER SUPPLY CORSAIR HX 750 WATT MSI BIG BANG XPOWER MAINBOARD. I'M USING MSI FOR MORE THEN 6 YEARS MY FIRST BOARD MSI X48C PLATINUM AND THE BOARD WORKS WELL UNTIL NOW SINCE 1 1/2 YEARS WARRANTY LEFT FOR THE CARD ANY ME I'M NOT A MILLIONAIRE TO SPEND AGAIN 461 DOLLAR TO BUY NEWCARD

>>Please read and comply with the Forum Rules.<<
>>Posting Guide<<

GTX 570 Twin FrozR II cold boot noise

I got a MSI GeForce GTX 570 Twin FrozR II OC graphics card. Recently I noticed that one of the fans is making a rattling noise on cold boots. The noise lasts for about 30-40 seconds and then goes away.
The card is just under 3 months old. Should I RMA it? Does MSI do Advanced RMA?

you can do query with msi about it here:
http://support.msi.com/

[Tech Help Needed] GTX 660 Twin Frozr III 2GB SC Fan Stops Working

Hello everyone.
It's extremely rare for me to have computer issues, but this time it happened.
MSI GTX 660 Twin Frozr III 2GB SC, and here's the issue:
Whenever i turn on the computer the gpu fans spin for around 5seconds and after that they stop, for now they seem fine since i'm usually idling for the 1st 30minutes or so, but when i start playing games the gpu temperatures skyrocket to around 60-70 idling in-game and the fans just won't start working, yes the the psu cables are connected to the gpu, bla bla ( duh ). i've had the gpu for around 2years and it worked fine but all of a "sudden" the fans just seem to not work and it starts getting very high temperatures, i've read someone complaining about the same issue and he was told to replace his gpu bios with some uefi bios and he said that the uefi update solved his fan issues which were the same as mine.
Now my problem is, i've never done that "Bios Flashing" and things like that and i don't know if my Board is compatible. If it worked for that person then it should work for me since the symptoms are literally the same. I've tried uninstalling the gpu drivers completely and installed again, the issue still persists.
If it's of any reference i own the following setup:
MB : ROG Asus Crosshair IV Formula
CPU : AMD Phenom II X6 1090T BE
GPU : MSI GTX 660 Twin Frozr III 2GB SC
RAM : 2x4GB G.Skill Ripjaw X 1600Mhz
PSU: Corsair GS 700 Gaming Series ( yes its more than enough and good enough )
I've literally had no problems whatsoever with my system for a few years now, and just like that the fans don't want to work, i can play games and what not, but at around 70ºC with no fans running ..... i've tried using MSI Afterburner to boost the fan speed, the fan speed setting gets set but the rpm stays at 0. i also made it to run on windows start and its still at 0 RPM.
Will the uefi bios solve my problem like it did to the other person with the exact same issue?
Thank you for your time spent reading, hopefully it will be solved.

Still no reply after 2 days, impressive support right there ... every other post that came after got replied ...
Anyway, if its also relevant about my issue :
- Fans briefly spin after i press the power button to turn on my computer and stop right after around 3-5s and never spin again until i shutdown and power on again for the same brief spin.
- If i force the fans on Afterburner to 90% or above ( 100% ) they spin and make unsupportable noise.
Also if its of any relevance :
N660 TF 2GD5/OC
S/N: 602 - V287 - 050B1302044857
At least provide me with the most up-to-date uefi/gop vbios or whatever that is, to see if it fixes my problem, otherwise recommend me a substitute cooling system that i can use ( a good one, not 3rd rated ) to replace the stock cooling in this because i don't have the money to get another card, and if i get one it won't be from msi for sure.
Very dissapointed.

MSI GeForce GTX 560Ti "Twin Frozr II" crash at 50 degrees Celsius

I get artifacts (pink squares all over screen) in heaven benchmark, fluid benchmark and gta 4, a few seconds later I get a black screen and then an error message there windows tell me the driver has crash but praise msi it was successfully recovered. All this then the card is nearing 50 degrees Celsius.
I have:
MSI GeForce GTX 560Ti "Twin Frozr II", (BIOS: 70.24.0a.00.00)
Gigabyte GA-890GPA-UD3H, Socket-AM3
AMD Phenom II X4 965 Black Edition
Corsair Powersupply 650W Black,ATX/EPS
Corsair XMS3 DDR3 1600MHz 4GB CL9
Windows 7 64bit (with sp1)
DC OUTPUT +3.3V +5V +12V -12V +5Vsb
MAX LOAD 24A 30A 52A 0.8A 3A
I tested driver on msi site and the latest nvidia driver, even tested some beta driver. All give the same result as stated above. I also tested to set the clocks at reference speed but no go. Also tested voltage at 1025.

Got a new card today, same card but new.
No problems now, seem the new card has newer bios and lower core voltage. Maybe that is a way to fix it, just upgrade bios.

MSI nVidia GTX 560ti Twin frozr III loss of output

Hi folks,
I recently needed my monitor to test another rig and upon plugging it back in I discovered my MSI nVidia GTX 560ti Twin frozr III no longer has video output, I have tried different outputs, different cables, different displays and different motherboard slots to no avail. Had a search around and couldn't find any other instances of this. The card is 2 years old now but has always functioned perfectly (apart from the well publicised memory temperature problem). Any ideas what might be causing this issue?
Regards,
hotrats
Specs:
Windows 7 PRO SP1 64bit
AMD FX-8350 8 Core Black Edition Processor 4.57gHz OC
ASUS M5A99X EVO Motherboard R2
MSI nVidia GTX 560ti Twin frozr III
Corsair Vengeance 2x4GB DDR3
Thermatake 750W Evo_blue 2.0
I'm assuming drives and case aren't the issue so not listing them.

The card is 2 years old, but how long wasn't it used for and did you ever had any problems with it?
First of all, I would reset CMOS >>Clear CMOS Guide<< so all the OC is removed (write down settings of CPU OC if you want to use it later on).
Then (I don't know Asus boards) would look through the BIOS if it recognises the card. Possible you should get rid of the possible dust in PCIe slot?
Also: while card is plugged in, run computer and: try all the video ports, even those on motherboard (maybe board doesn't recognise the card and wants to run integrated gpu if there is any).
Last but not least: ask a friend/colleague if you can test your card in their computer. Best if it would be different brand of motherboard, and power supply. Possibly power supply is screwed up somewhere (broken connection)and doesn't deliver enough power to give output.
Does the card start up when you run the PC (fans of the card)?

MSI GeForce GTX 770 Twin Frozr - 4GB noicey fan

Hey.
I have more or less just gotten me a MSI GeForce GTX 770 Twin Frozr - 4GB but i have found that when the fans hit around 60% PWM then one of them is starting to make alot of noice like its a old uesed fan.
do any one know what this comes by and maybe how to fix it..
i did contact the shop where i did buy it and they told me it had to be send to germany to be checked... taking that it might take up to 20 working days and do to im uesing my computer to work from then its hard to just take the card out and sit back waiting to what will happen and have no income the next 20 days ....
What To DO..

Welcome to world where products are not good enought tested before sell.
I had problem with one not working fan in msi 270x and i wait 2nd week to pay mine money back.

MSI Geforce GTX 580 Twin Frozr II Reference?

Hey I gotta few quick questions. Thanks
Is the MSI Geforce GTX 580 Twin Frozr II a reference design PCB underneath the cooler?
And do the military class components get in the way of other custom cooler E.g. A waterblock?

Quote
Is the MSI Geforce GTX 580 Twin Frozr II a reference design PCB underneath the cooler?
yes it is
Quote
And do the military class components get in the way of other custom cooler E.g. A waterblock?
You can check Hydrogen version: http://msi.com/product/vga/N580GTX-HydroGen-OC.html

Geforce GTX 570 Twin Frozr III PE/OC and BSOD

Similar Messages

Maybe you are looking for