GeForce to Quadro(SoftQuadro4)

Hello,can I know someone know to do the geforce >quadro using by riva tuner.because I want try Quadro ,how good for it????
I used GF4 MX 420 (Winfast A170),GF FX 5200(Asus V9520 Magic/T),plz show the method or what need to patch it...
Thanks !!!!!!!!

GlennVidia,
thanks to reply.
i heard the gfmx can to quadro 4 550XGL,fx5200 can quadro Fx500 or geforce fx5500
geforce fx 5200 to gefroce fx 5500 see the link
http://article.pchome.net/2004/05/26/20212_2.htm
http://www.ocer.net/article/a_show.php?id=3657

Similar Messages

  • Quadro 5000 and Geforce

    hi everyone, I'm basicly using maya, nuke and sometimes adobe programs. my pc is 3 years old second gen i7, it's still good but I'm about to get a heavy project and it's time to get a new one for me.
    1- I need to learn if I can use geforce and quadro (sli or separate) cards on my desktop pc.
    drivers and programs will run okay?
    2- I'm about to get 3770k cpu and quadro 5000, but I can't decide what is best motherboard to use on this rig.
    regards,

    Here's how GPU performance can slow down on an LGA 1155 platform: The CPU itself has only 16 available PCI-e lanes. Normally, all 16 of those lanes are fed to the GPU that's sitting in the primary PCI-e x16 slot. But on most LGA 1155 motherboards, if you add a second GPU, then the bandwidth of the primary PCI-e x16 slot will drop to only x8 bandwidth because the secondary PCI-e x16 slot would then steal eight of those PCI-e lanes from the primary x16 slot. (There are a few LGA 1155 motherboards that maintain x16 bandwidth in the primary x16 slot even with a second GPU installed - but that is because the "secondary" x16-length slot is actually only an x4 slot, run off of the P67/Z68/Z77 PCH in PCI-e 2.0 x4 mode, instead of directly off of the CPU.) (By the way, LGA 1155 CPUs have 20 total PCI-e lanes - but four of those are actually fed to the P67/Z68/Z77 PCH, making only 16 lanes available for GPUs.)
    And we've been advising against the Quadro 5000 because it is now two generations old, and as such outdated. In fact, it dates all the way back to 2010 when the first-generation hexacore i7, the i7-980X, was brand new (Sandy Bridge was not yet on the market back then). As a GPU, it is no faster than an old GeForce GTX 465 that it's based on because although both GPUs have 352 CUDA cores, the Quadro 5000's low actual clock speed of 513MHz (compared to the 607 MHz of the GTX 465) completely offsets the Quadro 5000's higher memory bandwidth of 120 GB/s (versus 102.6 GB/s on the GTX 465). Yet it still costs more than $1,500 new, even today. That's extremely severely overpriced for a GPU that's only going to be used in a secondary capacity, with the GPU going almost completely unutilized most of the time.
    Finally, there is the issue of driver compatibility: GeForce drivers generally do not work with Quadros, nor do Quadro drivers work with GeForces. And there is a good chance that the two drivers will conflict with one another, seriously affecting stability and performance. That is more likely to occur if the GeForce and Quadro cards are of two completely different GPU generations (for example, that Quadro 5000 that you're considering may clash with the GeForce 600-series GPU that's being used as primary). So, to minimize the risk of such conflicts, only consider a K-series Quadro if you need 10-bit output for a system that normally uses a GeForce GTX 600-series GPU. (This means that as a secondary output GPU for 10-bit monitors, a $400 Quadro K2000 or even a $200 Quadro K600 would suffice as a secondary output card.)
    And no, the LGA 2011 platform with its i7-39xx CPU is not a first-generation i7. It is actually considered a second-generation i7 (like the i7-3770K's predecessor, the i7-2600K/2700K).
    Message was edited by: RjL190365

  • Enhancing GPU: 2 cards GeForce GTX 770 connected with SLI  or Nvidia Quadro K5000?

    Hello, I'm going to start working with video files of 4k raw format (Premiere, After Effects, SpeedGrade, RedGiant plug-ings). Now I have a video card GPU Nvidia GeForce GTX 770, but I was told that game video cards GeFroce have limited  fukntsional when working with video in Premiere. Is it really so? If I change my card to Nvidia Quadro K5000 which has close characteristics, will I get any extra features working in Adobe programms (Premiere, SpeesGrade, After Effect)? Does it make sense in such a substitution? Or is it better to buy a second GTX 770 and put them in SLI? Will Adobe support that?

    No, the Geforce cards don't have a limitation with 4K media and the GPU acceleration. The GPU acceleration ie CUDA is not specific to either Geforce or Quadro. The specs of the cards decide the performance. The Geforce Specs are far greater than the Quadro K5000 if you get the 780Ti or the Titan Black Edition. Both cards are cheaper. The only benefit the Quadro card has in regards to Adobe is the 10bit color output option for preview since Adobe is Open GL based for the API. However you can get a Blackmagic 4K studio card with a Titan Black edition and still spend less money than the K5000 while having far better performance. I personally run a E5-2697 V2 12 Core Xeon with a 770GTX 4GB card and I play 4K r3d back at half resolution easily right now. Full resolution for preview with 4K red is simply not possible via any software other than Redcine X Pro right now until the GPU acceleration debayering is available. BTW I would suggest 1 Titan Black edition over 2x 770GTX cards. The scaling across GPU's only works on rendering right now. When the GPU acceleration debayer is available then adding a 2nd Titan card would be far better than having 2x 770GTX cards.
    SLI and GPU acceleration are 2 different technologies. SLI is scaling the drawing to the display across more than 1 video card. GPU acceleration is a programming module that send calculations to the GPU for processing that were normally processed by the player via the CPU. GPU acceleration does not require or even use SLI to scale across GPU's. That is managed and scheduled by the application.
    Eric
    ADK

  • CS5.5, 10 bit, AVCIntra, AJA Kona and GTX580 vs Quadro

    I will be purchasing a new editing computer in june. I'm switching over from Final Cut Pro on a Mac. Why am I switching? For a lot of reasons, but suffice it to say, CS5.5 is really looking like a time saver, and seems to make good business sense overall. And being independent, I don't really care about conforming to any one dogmatic camp (FCP or Avid, and the like).
    I'm working a lot with AVCIntra footage (10-bit) and client-provided 3D generated content (also 10-bit). I'll have an AJA Kona LHi (supporting 10-bit) installed.
    I've read a lot on the GeForce vs. Quadro, and understand that there is not much advantage to a Quadro, other then the extra edge for 3D applications. And that Geforces are 8-bit and Quadro are 10-bit. So price wise, the Geforce 580 for CS5.5 is probably my best bet.
    My main questions are: Does PProCS5.5 fully support 10-bit, end-to-end? And if the GeForce is only 8-bit (though I've glimpsed somewhere the 580 might support 10-bit), will it impact real-time MPE playback outputed on the AJA Kona card? With the AJA Kona LHi installed, does it matter at all that I have an 8-bit or a 10-bit GPU card?
    On a side note, there is a GTC590 now, with dual GPUs. Anyone tested it yet with the hack? Or will it be the same problem as with SLI GeForces not being supported by PPro?
    One a second side note, I know people ask a lot about the best hardware to use. I've read a lot of posts about them. Most of them are quite old posts. As of May 2011, Any recommendations on components? Such as motherboards, raid cards, GTX580 manufacturer, etc.? But I'm especially interested to find out if the 6-core 990X i7 is worth the investment, compared to the 2nd gen 4-core i7 2600K? I would presume yes. But have never seen real world tests. And would a dual Xeon truly be twice as fast? Investment wise, much like the Geforce vs Quadro issue, I'm not sure it's worth 3 times the price for most likely less then twice the speed. Any comments?
    Thank you all,

    Actually I am trying to get an answer to your 10 bit question via the I/O device currently. I am verifying if the I/O device is independent of the OGL 10Bit query Adobe does for the 10bit draw or if the I/O device passes the query. If not then do you have to have a Quadro card installed even with the I/O devices. Once I have the info, I will post it for you.
    The AJA drivers before the 5.5 update did not work completely with the hardware acceleration, so an AJA card would slow the MPE performance down if using an AJA preset and the card. I am unsure if that is still the case with the new 5.5 version however they don't show an update for 5.5 on their website. I would call and talk to AJA on that one.
    The MPE does not support Multi GPU so the 590 would be slower than the 570 or 580.
    The 990X is worth it if you work allot in AE or overclock. Also what codec is the 3D material you will be working with?
    Eric
    ADK

  • Hardware Acceleration on Flash, NVIDIA GeForce GTX 285

    Has it been enabled on OS X? I tried to play an 1080p YouTube and the CPU still shows over 100%.
    I tried the same on Windows thorugh Boot Camp, I got maximum 15% CPU usage.

    I think anandtech reviewed Flash w/ GTX 285 - a year ago:
    http://www.anandtech.com/show/2876
    Adobe® Flash® Player "Square" is a preview release that enables native 64-bit support on Linux, Mac OS, and Windows operating systems
    http://labs.adobe.com/technologies/flashplayer10/
    Flash Player 10.1 supports hardware-accelerated decoding of H.264 video on Windows and Mac computers with supported hardware and drivers, providing enhanced video performance. For the latest information on supported hardware and drivers, visit the following vendor sites:
    NVIDIA drivers
    Flash Player 10.1 offers GPU-acceleration of H.264 video on NVIDIA ION and supported NVIDIA GeForce and Quadro-powered computers.
    Mac OS X hardware decoding support
    On Mac computers, hardware decoding of H.264 video in Flash Player is available with Mac OS X 10.6.4 and later on hardware supported by the Mac OS Video Decode Acceleration Framework (such as the NVIDIA GeForce 9400M, GeForce 320M, and GeForce GT 330M). Whether hardware decoding will engage for a specific video is determined by the Mac OS Video Decode Acceleration Framework. View hardware used by different Mac models
    http://developer.apple.com/mac/library/technotes/tn2010/tn2267.html
    http://www.google.com/search?q=MacGTX+285+Flash+10.1hardware
    Flash playback is extremely CPU intensive. CUDA is something Nvidia knows, and OpenCL is in its 1.1 infancy and lagging on AMD and with Adobe.

  • GeForce 7800 GT OC from BFG Technologies

    My question is a bit different. I got a GeForce 7800 Gt OC, overclocked, coming for Christmas. It says on the box - for Mac OS X and Windows XP, 2000. Are the drivers already installed in the Dual Core G5 with PCI Express? Does anyone know for sure if this card will work? I will need to send it back if it doesn't. No where on the bfgtech.com website does it mention anything about it actually working in a new dual core with PCI Express. My wife will be so upset if I have to send it back. I needed it to use Aperture because the GeForce 6600 isn't fast enough.
    Dual Core G5/2.3 GHz. with PCI Express   Mac OS X (10.4.3)  

    It says on the box? Hmm.
    For a graphics card to work on a Mac, it must have a Mac software drivers and Mac compatible firmware. Since Apple includes the nVidia GeForce driver in Mac OS X, the issue is firmware.
    It's possible to put both Mac and PC firmware in the same card. ATI did it with one card (Radeon 9600 Pro). But the GeForce 7800 GT or GTX for Windows PC does not come with a combination firmware.
    Apple flashes the GeForce and Quadro cards sold on their site with proprietary firmware. The only way to get your overclocked PC compatible GeForce 7800 GT to work is if you extract the firmware from a Mac compatible 7800 GT and flash the PC compatible card with the Mac firmware.
    Even if you ignore the proprietary intellectual property issue, the currrent firmware dumper for nVidia cards (Graphiccelerator) is currently unable to dump the firmware from the GeForce 7800 GT.
    If nVidia ever releases multi-platform firmware, I'll be first in line to buy a 7800 GTX from BFG only I want the one overclocked to 580MHz core clock speed. Until then, let's hope Apple releases the 7800 GT as a kit (or ATI releases a retail Radeon X1800 XT for the Mac).

  • Xorg segfault [solved]

    Some wine applications crash my xorg.. Here is the log:
    [ 474.208]
    X.Org X Server 1.14.1
    Release Date: 2013-04-17
    [ 474.209] X Protocol Version 11, Revision 0
    [ 474.209] Build Operating System: Linux 3.8.7-1-ARCH x86_64
    [ 474.209] Current Operating System: Linux pendulum 3.9.7-1-ARCH #1 SMP PREEMPT Thu Jun 20 22:45:32 CEST 2013 x86_64
    [ 474.209] Kernel command line: root=/dev/disk/by-id/ata-WDC_WD5000AADS-00S9B0_WD-WCAV91496126-part2 zfs=maindisk/root quiet ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
    [ 474.209] Build Date: 17 April 2013 02:37:06PM
    [ 474.209]
    [ 474.209] Current version of pixman: 0.30.0
    [ 474.209] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 474.209] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 474.210] (==) Log file: "/var/log/Xorg.2.log", Time: Sun Jun 23 15:24:17 2013
    [ 474.210] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 474.211] (==) No Layout section. Using the first Screen section.
    [ 474.211] (==) No screen section available. Using defaults.
    [ 474.211] (**) |-->Screen "Default Screen Section" (0)
    [ 474.211] (**) | |-->Monitor "<default monitor>"
    [ 474.211] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 474.211] (==) Automatically adding devices
    [ 474.211] (==) Automatically enabling devices
    [ 474.211] (==) Automatically adding GPU devices
    [ 474.211] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 474.211] Entry deleted from font path.
    [ 474.211] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 474.211] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 474.211] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 474.211] (II) Loader magic: 0x7fcc20
    [ 474.211] (II) Module ABI versions:
    [ 474.212] X.Org ANSI C Emulation: 0.4
    [ 474.212] X.Org Video Driver: 14.1
    [ 474.212] X.Org XInput driver : 19.1
    [ 474.212] X.Org Server Extension : 7.0
    [ 474.212] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 474.212] setversion 1.4 failed
    [ 474.213] (--) PCI:*(0:1:0:0) 10de:0615:19da:7103 rev 162, Mem @ 0xe6000000/16777216, 0xd0000000/268435456, 0xe4000000/33554432, I/O @ 0x0000b000/128, BIOS @ 0x????????/131072
    [ 474.213] Initializing built-in extension Generic Event Extension
    [ 474.214] Initializing built-in extension SHAPE
    [ 474.214] Initializing built-in extension MIT-SHM
    [ 474.214] Initializing built-in extension XInputExtension
    [ 474.214] Initializing built-in extension XTEST
    [ 474.214] Initializing built-in extension BIG-REQUESTS
    [ 474.214] Initializing built-in extension SYNC
    [ 474.214] Initializing built-in extension XKEYBOARD
    [ 474.214] Initializing built-in extension XC-MISC
    [ 474.214] Initializing built-in extension SECURITY
    [ 474.214] Initializing built-in extension XINERAMA
    [ 474.214] Initializing built-in extension XFIXES
    [ 474.214] Initializing built-in extension RENDER
    [ 474.214] Initializing built-in extension RANDR
    [ 474.214] Initializing built-in extension COMPOSITE
    [ 474.214] Initializing built-in extension DAMAGE
    [ 474.214] Initializing built-in extension MIT-SCREEN-SAVER
    [ 474.214] Initializing built-in extension DOUBLE-BUFFER
    [ 474.215] Initializing built-in extension RECORD
    [ 474.215] Initializing built-in extension DPMS
    [ 474.215] Initializing built-in extension X-Resource
    [ 474.215] Initializing built-in extension XVideo
    [ 474.215] Initializing built-in extension XVideo-MotionCompensation
    [ 474.215] Initializing built-in extension XFree86-VidModeExtension
    [ 474.215] Initializing built-in extension XFree86-DGA
    [ 474.215] Initializing built-in extension XFree86-DRI
    [ 474.215] Initializing built-in extension DRI2
    [ 474.215] (II) LoadModule: "glx"
    [ 474.215] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 474.252] (II) Module glx: vendor="NVIDIA Corporation"
    [ 474.252] compiled for 4.0.2, module version = 1.0.0
    [ 474.252] Module class: X.Org Server Extension
    [ 474.252] (II) NVIDIA GLX Module 319.23 Thu May 16 19:23:10 PDT 2013
    [ 474.252] Loading extension GLX
    [ 474.252] (==) Matched nouveau as autoconfigured driver 0
    [ 474.252] (==) Matched nvidia as autoconfigured driver 1
    [ 474.253] (==) Matched nv as autoconfigured driver 2
    [ 474.253] (==) Matched vesa as autoconfigured driver 3
    [ 474.253] (==) Matched modesetting as autoconfigured driver 4
    [ 474.253] (==) Matched fbdev as autoconfigured driver 5
    [ 474.253] (==) Assigned the driver to the xf86ConfigLayout
    [ 474.253] (II) LoadModule: "nouveau"
    [ 474.254] (WW) Warning, couldn't open module nouveau
    [ 474.254] (II) UnloadModule: "nouveau"
    [ 474.254] (II) Unloading nouveau
    [ 474.254] (EE) Failed to load module "nouveau" (module does not exist, 0)
    [ 474.254] (II) LoadModule: "nvidia"
    [ 474.254] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 474.255] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 474.255] compiled for 4.0.2, module version = 1.0.0
    [ 474.255] Module class: X.Org Video Driver
    [ 474.255] (II) LoadModule: "nv"
    [ 474.255] (II) Loading /usr/lib/xorg/modules/drivers/nv_drv.so
    [ 474.255] (II) Module nv: vendor="X.Org Foundation"
    [ 474.255] compiled for 1.14.0, module version = 2.1.20
    [ 474.256] Module class: X.Org Video Driver
    [ 474.256] ABI class: X.Org Video Driver, version 14.1
    [ 474.256] (II) LoadModule: "vesa"
    [ 474.256] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [ 474.256] (II) Module vesa: vendor="X.Org Foundation"
    [ 474.256] compiled for 1.14.0, module version = 2.3.2
    [ 474.256] Module class: X.Org Video Driver
    [ 474.256] ABI class: X.Org Video Driver, version 14.1
    [ 474.256] (II) LoadModule: "modesetting"
    [ 474.257] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
    [ 474.257] (II) Module modesetting: vendor="X.Org Foundation"
    [ 474.257] compiled for 1.14.1, module version = 0.8.0
    [ 474.257] Module class: X.Org Video Driver
    [ 474.257] ABI class: X.Org Video Driver, version 14.1
    [ 474.257] (II) LoadModule: "fbdev"
    [ 474.257] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
    [ 474.257] (II) Module fbdev: vendor="X.Org Foundation"
    [ 474.258] compiled for 1.14.0, module version = 0.4.3
    [ 474.258] Module class: X.Org Video Driver
    [ 474.258] ABI class: X.Org Video Driver, version 14.1
    [ 474.258] (II) NVIDIA dlloader X Driver 319.23 Thu May 16 19:02:20 PDT 2013
    [ 474.258] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 474.258] (II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
    Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
    Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
    GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
    GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
    Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
    GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
    GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
    GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
    GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
    GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
    GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
    Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
    GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
    GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
    GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
    Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
    GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
    Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
    GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
    GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
    GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
    GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
    GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
    GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
    Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
    GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
    GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
    GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
    GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
    GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
    Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
    GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
    GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
    GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
    GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
    Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
    GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
    GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
    GeForce Go 6600, GeForce Go 6600 GT, Quadro NVS 440, Quadro FX 550,
    Quadro FX 550, Quadro FX 540, GeForce 6200, GeForce 6500,
    GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
    GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
    GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 7100 GS,
    GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT,
    GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
    GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
    GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7350 LE,
    GeForce 7300 LE, GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300,
    GeForce Go 7400, GeForce Go 7400 GS, Quadro NVS 110M,
    Quadro NVS 120M, Quadro FX 350M, GeForce 7500 LE, Quadro FX 350,
    GeForce 7300 GS, GeForce 7650 GS, GeForce 7600 GT, GeForce 7600 GS,
    GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT, GeForce Go 7700,
    GeForce Go 7600, GeForce Go 7600 GT, Quadro NVS 300M,
    GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560, GeForce 7900 GTX,
    GeForce 7900 GT, GeForce 7900 GS, GeForce 7950 GX2, GeForce 7950 GX2,
    GeForce 7950 GT, GeForce Go 7950 GTX, GeForce Go 7900 GS,
    GeForce Go 7900 GTX, Quadro FX 2500M, Quadro FX 1500M,
    Quadro FX 5500, Quadro FX 3500, Quadro FX 1500, Quadro FX 4500 X2,
    GeForce 6150, GeForce 6150 LE, GeForce 6100, GeForce Go 6150,
    Quadro NVS 210S / NVIDIA GeForce 6150LE, GeForce Go 6100,
    GeForce 6150SE, GeForce 6100 nForce 405, GeForce 6100 nForce 400,
    GeForce 6100 nForce 420, GeForce 7150M / nForce 630M,
    GeForce 7000M / nForce 610M, GeForce 7050 PV / nForce 630a,
    GeForce 7050 PV / nForce 630a, GeForce 7025 / nForce 630a,
    GeForce 8800 GTX, GeForce 8800 GTS, GeForce 8800 Ultra,
    Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS, GeForce 8600 GT,
    GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS, GeForce 9500M GS,
    GeForce 8300 GS, GeForce 8600M GT, GeForce 9650M GS,
    GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M,
    Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce GT 330,
    GeForce 8400 SE, GeForce 8500 GT, GeForce 8400 GS, GeForce 8300 GS,
    GeForce 8400 GS, GeForce 8600M GS, GeForce 8400M GT,
    GeForce 8400M GS, GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M,
    Quadro NVS 135M, GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G,
    Quadro NVS 290, GeForce GTX 295, GeForce GTX 280, GeForce GTX 260,
    GeForce GTX 285, GeForce GTX 275, GeForce GTX 260, GeForce GTX 295,
    Quadroplex 2200 D2, Quadroplex 2200 S4, Quadro CX, Quadro FX 5800,
    Quadro FX 4800, Quadro FX 3800, GeForce 8800 GTS 512,
    GeForce 9800 GT, GeForce 8800 GT, GeForce GT 230, GeForce 9800 GX2,
    GeForce 9800 GT, GeForce 8800 GS, GeForce GTS 240, GeForce 9800M GTX,
    GeForce 8800M GTS, GeForce GTX 280M, GeForce 9800M GT,
    GeForce 8800M GTX, GeForce 8800 GS, GeForce GTX 285M,
    GeForce 9600 GSO, GeForce 8800 GT, GeForce 9800 GTX/9800 GTX+,
    GeForce 9800 GTX+, GeForce 9800 GT, GeForce GTS 250,
    GeForce 9800M GTX, GeForce GTX 260M, Quadro FX 4700 X2,
    Quadro FX 3700, Quadro VX 200, Quadro FX 3600M, Quadro FX 2800M,
    Quadro FX 3700M, Quadro FX 3800M, GeForce 9600 GT, GeForce 9600 GS,
    GeForce 9600 GSO 512, GeForce GT 130, GeForce GT 140,
    GeForce 9800M GTS, GeForce 9700M GTS, GeForce 9800M GS,
    GeForce 9800M GTS, GeForce 9600 GT, GeForce 9600 GT,
    GeForce GTS 160M, GeForce GTS 150M, GeForce 9600 GSO,
    GeForce 9600 GT, Quadro FX 1800, Quadro FX 2700M, GeForce 9500 GT,
    GeForce 9400 GT, GeForce 9500 GT, GeForce 9500 GS, GeForce 9500 GS,
    GeForce GT 120, GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT,
    GeForce 9700M GT, GeForce 9500M G, GeForce 9650M GT, GeForce G 110M,
    GeForce GT 130M, GeForce GT 120M, GeForce GT 220M, GeForce 9650 S,
    Quadro FX 380, Quadro FX 580, Quadro FX 1700M, GeForce 9400 GT,
    Quadro FX 770M, GeForce 9300 GE, GeForce 9300 GS, GeForce 8400,
    GeForce 8400 SE, GeForce 8400 GS, GeForce 9300M GS, GeForce G100,
    GeForce 9300 SE, GeForce 9200M GS, GeForce 9300M GS, Quadro NVS 150M,
    Quadro NVS 160M, GeForce G 105M, GeForce G 103M, GeForce G105M,
    Quadro NVS 420, Quadro FX 370 LP, Quadro NVS 450, Quadro FX 370M,
    Quadro NVS 295, GeForce 9100M G, GeForce 8200M G, GeForce 9200,
    GeForce 9100, GeForce 8300, GeForce 8200, nForce 730a, GeForce 9200,
    nForce 980a/780a SLI, nForce 750a SLI, GeForce 8100 / nForce 720a,
    GeForce 9400, GeForce 9400, GeForce 9400M G, GeForce 9400M,
    GeForce 9300, ION, GeForce 9400M G, GeForce 9400, nForce 760i SLI,
    GeForce 9400, GeForce 9300 / nForce 730i, GeForce 9200,
    GeForce 9100M G, GeForce 8200M G, GeForce 9400M, GeForce 9200,
    GeForce G102M, GeForce G102M, ION, ION, GeForce 9400, ION, ION LE,
    ION LE, GeForce GT 220, GeForce 315, GeForce 210, GeForce GT 230M,
    GeForce GT 330M, GeForce GT 230M, GeForce GT 330M, NVS 5100M,
    GeForce GT 320M, GeForce GT 240M, GeForce GT 325M, Quadro FX 880M,
    GeForce G210, GeForce 205, GeForce 310, ION, GeForce 210,
    GeForce 310, GeForce 315, GeForce G105M, GeForce G105M, NVS 2100M,
    NVS 3100M, GeForce 305M, ION, GeForce 310M, GeForce 305M,
    GeForce 310M, GeForce 305M, GeForce G210M, GeForce 310M,
    Quadro FX 380 LP, Quadro FX 380M, GeForce GT 330, GeForce GT 320,
    GeForce GT 240, GeForce GT 340, GeForce GT 330, GeForce GTS 260M,
    GeForce GTS 250M, GeForce 315, GeForce GT 335M, GeForce GTS 350M,
    GeForce GTS 360M, Quadro FX 1800M
    [ 474.299] (II) VESA: driver for VESA chipsets: vesa
    [ 474.299] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
    [ 474.299] (II) FBDEV: driver for framebuffer: fbdev
    [ 474.300] (--) using VT number 2
    [ 474.747] (II) Loading sub module "fb"
    [ 474.747] (II) LoadModule: "fb"
    [ 474.747] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 474.747] (II) Module fb: vendor="X.Org Foundation"
    [ 474.747] compiled for 1.14.1, module version = 1.0.0
    [ 474.747] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 474.747] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 474.747] (II) Loading sub module "wfb"
    [ 474.747] (II) LoadModule: "wfb"
    [ 474.747] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 474.748] (II) Module wfb: vendor="X.Org Foundation"
    [ 474.748] compiled for 1.14.1, module version = 1.0.0
    [ 474.748] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 474.748] (II) Loading sub module "shadow"
    [ 474.748] (II) LoadModule: "shadow"
    [ 474.748] (II) Loading /usr/lib/xorg/modules/libshadow.so
    [ 474.748] (II) Module shadow: vendor="X.Org Foundation"
    [ 474.748] compiled for 1.14.1, module version = 1.1.0
    [ 474.748] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 474.748] (II) Loading sub module "ramdac"
    [ 474.748] (II) LoadModule: "ramdac"
    [ 474.748] (II) Module "ramdac" already built-in
    [ 474.749] (WW) Falling back to old probe method for vesa
    [ 474.749] (WW) Falling back to old probe method for modesetting
    [ 474.749] (WW) Falling back to old probe method for fbdev
    [ 474.749] (II) Loading sub module "fbdevhw"
    [ 474.749] (II) LoadModule: "fbdevhw"
    [ 474.749] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
    [ 474.749] (II) Module fbdevhw: vendor="X.Org Foundation"
    [ 474.749] compiled for 1.14.1, module version = 0.0.2
    [ 474.749] ABI class: X.Org Video Driver, version 14.1
    [ 474.749] (EE) open /dev/fb0: No such file or directory
    [ 474.749] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 474.749] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    [ 474.749] (==) NVIDIA(0): RGB weight 888
    [ 474.749] (==) NVIDIA(0): Default visual is TrueColor
    [ 474.749] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 474.750] (**) NVIDIA(0): Enabling 2D acceleration
    [ 474.948] (II) NVIDIA(GPU-0): Display (Acer S240HL (DFP-0)) does not support NVIDIA 3D
    [ 474.948] (II) NVIDIA(GPU-0): Vision stereo.
    [ 474.949] (II) NVIDIA(0): NVIDIA GPU GeForce GTS 250 (G92) at PCI:1:0:0 (GPU-0)
    [ 474.949] (--) NVIDIA(0): Memory: 1048576 kBytes
    [ 474.949] (--) NVIDIA(0): VideoBIOS: 62.92.7e.00.00
    [ 474.949] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 474.955] (--) NVIDIA(0): Valid display device(s) on GeForce GTS 250 at PCI:1:0:0
    [ 474.955] (--) NVIDIA(0): CRT-0
    [ 474.955] (--) NVIDIA(0): CRT-1
    [ 474.955] (--) NVIDIA(0): TV-0
    [ 474.955] (--) NVIDIA(0): Acer S240HL (DFP-0) (boot, connected)
    [ 474.955] (--) NVIDIA(0): DFP-1
    [ 474.955] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
    [ 474.955] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
    [ 474.955] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
    [ 474.955] (--) NVIDIA(0): Acer S240HL (DFP-0): 330.0 MHz maximum pixel clock
    [ 474.955] (--) NVIDIA(0): Acer S240HL (DFP-0): Internal Dual Link TMDS
    [ 474.955] (--) NVIDIA(0): DFP-1: 330.0 MHz maximum pixel clock
    [ 474.955] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
    [ 474.955] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 474.955] (**) NVIDIA(0): device Acer S240HL (DFP-0) (Using EDID frequencies has
    [ 474.955] (**) NVIDIA(0): been enabled on all display devices.)
    [ 474.957] (==) NVIDIA(0):
    [ 474.957] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [ 474.957] (==) NVIDIA(0): will be used as the requested mode.
    [ 474.957] (==) NVIDIA(0):
    [ 474.957] (II) NVIDIA(0): Validated MetaModes:
    [ 474.957] (II) NVIDIA(0): "DFP-0:nvidia-auto-select{}"
    [ 474.957] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
    [ 474.987] (--) NVIDIA(0): DPI set to (92, 91); computed from "UseEdidDpi" X config
    [ 474.987] (--) NVIDIA(0): option
    [ 474.987] (II) UnloadModule: "nv"
    [ 474.988] (II) Unloading nv
    [ 474.988] (II) UnloadModule: "vesa"
    [ 474.988] (II) Unloading vesa
    [ 474.988] (II) UnloadModule: "modesetting"
    [ 474.988] (II) Unloading modesetting
    [ 474.988] (II) UnloadModule: "fbdev"
    [ 474.988] (II) Unloading fbdev
    [ 474.988] (II) UnloadSubModule: "fbdevhw"
    [ 474.988] (II) Unloading fbdevhw
    [ 474.988] (--) Depth 24 pixmap format is 32 bpp
    [ 474.988] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
    [ 474.991] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 474.991] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 474.991] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 474.991] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 474.991] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 474.991] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 474.991] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 474.991] (II) NVIDIA(0): Config Options in the README.
    [ 474.996] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select{}"
    [ 475.029] Loading extension NV-GLX
    [ 475.039] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 475.041] (==) NVIDIA(0): Backing store disabled
    [ 475.041] (==) NVIDIA(0): Silken mouse enabled
    [ 475.042] (==) NVIDIA(0): DPMS enabled
    [ 475.042] Loading extension NV-CONTROL
    [ 475.042] Loading extension XINERAMA
    [ 475.042] (II) Loading sub module "dri2"
    [ 475.042] (II) LoadModule: "dri2"
    [ 475.042] (II) Module "dri2" already built-in
    [ 475.042] (II) NVIDIA(0): [DRI2] Setup complete
    [ 475.042] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 475.042] (--) RandR disabled
    [ 475.046] (II) Initializing extension GLX
    [ 475.195] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 475.195] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 475.195] (II) LoadModule: "evdev"
    [ 475.196] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 475.196] (II) Module evdev: vendor="X.Org Foundation"
    [ 475.196] compiled for 1.14.0, module version = 2.8.0
    [ 475.196] Module class: X.Org XInput Driver
    [ 475.196] ABI class: X.Org XInput driver, version 19.1
    [ 475.196] (II) Using input driver 'evdev' for 'Power Button'
    [ 475.196] (**) Power Button: always reports core events
    [ 475.196] (**) evdev: Power Button: Device: "/dev/input/event4"
    [ 475.196] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 475.196] (--) evdev: Power Button: Found keys
    [ 475.196] (II) evdev: Power Button: Configuring as keyboard
    [ 475.196] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
    [ 475.196] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 475.196] (**) Option "xkb_rules" "evdev"
    [ 475.196] (**) Option "xkb_model" "evdev"
    [ 475.196] (**) Option "xkb_layout" "us"
    [ 475.217] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 475.217] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 475.217] (II) Using input driver 'evdev' for 'Power Button'
    [ 475.217] (**) Power Button: always reports core events
    [ 475.217] (**) evdev: Power Button: Device: "/dev/input/event3"
    [ 475.217] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 475.217] (--) evdev: Power Button: Found keys
    [ 475.218] (II) evdev: Power Button: Configuring as keyboard
    [ 475.218] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3"
    [ 475.218] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 475.218] (**) Option "xkb_rules" "evdev"
    [ 475.218] (**) Option "xkb_model" "evdev"
    [ 475.218] (**) Option "xkb_layout" "us"
    [ 475.218] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 475.218] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 475.218] setversion 1.4 failed
    [ 475.218] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/event1)
    [ 475.219] (**) A4TECH USB Device: Applying InputClass "evdev keyboard catchall"
    [ 475.219] (II) Using input driver 'evdev' for 'A4TECH USB Device'
    [ 475.219] (**) A4TECH USB Device: always reports core events
    [ 475.219] (**) evdev: A4TECH USB Device: Device: "/dev/input/event1"
    [ 475.219] (II) evdev: A4TECH USB Device: Using mtdev for this device
    [ 475.219] (--) evdev: A4TECH USB Device: Vendor 0x9da Product 0x9090
    [ 475.219] (--) evdev: A4TECH USB Device: Found 1 mouse buttons
    [ 475.219] (--) evdev: A4TECH USB Device: Found scroll wheel(s)
    [ 475.219] (--) evdev: A4TECH USB Device: Found relative axes
    [ 475.219] (--) evdev: A4TECH USB Device: Found absolute axes
    [ 475.219] (--) evdev: A4TECH USB Device: Found absolute multitouch axes
    [ 475.219] (--) evdev: A4TECH USB Device: Found x and y absolute axes
    [ 475.219] (--) evdev: A4TECH USB Device: Found keys
    [ 475.219] (II) evdev: A4TECH USB Device: Forcing relative x/y axes to exist.
    [ 475.219] (II) evdev: A4TECH USB Device: Configuring as mouse
    [ 475.219] (II) evdev: A4TECH USB Device: Configuring as keyboard
    [ 475.219] (II) evdev: A4TECH USB Device: Adding scrollwheel support
    [ 475.219] (**) evdev: A4TECH USB Device: YAxisMapping: buttons 4 and 5
    [ 475.219] (**) evdev: A4TECH USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 475.219] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.0/input/input1/event1"
    [ 475.219] (II) XINPUT: Adding extended input device "A4TECH USB Device" (type: KEYBOARD, id 8)
    [ 475.219] (**) Option "xkb_rules" "evdev"
    [ 475.219] (**) Option "xkb_model" "evdev"
    [ 475.220] (**) Option "xkb_layout" "us"
    [ 475.220] (II) evdev: A4TECH USB Device: initialized for relative axes.
    [ 475.220] (WW) evdev: A4TECH USB Device: ignoring absolute axes.
    [ 475.220] (**) A4TECH USB Device: (accel) keeping acceleration scheme 1
    [ 475.220] (**) A4TECH USB Device: (accel) acceleration profile 0
    [ 475.220] (**) A4TECH USB Device: (accel) acceleration factor: 2.000
    [ 475.220] (**) A4TECH USB Device: (accel) acceleration threshold: 4
    [ 475.220] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/js0)
    [ 475.220] (II) No input driver specified, ignoring this device.
    [ 475.230] (II) This device may have been added with another device file.
    [ 475.230] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/event2)
    [ 475.230] (**) A4TECH USB Device: Applying InputClass "evdev pointer catchall"
    [ 475.230] (II) Using input driver 'evdev' for 'A4TECH USB Device'
    [ 475.230] (**) A4TECH USB Device: always reports core events
    [ 475.230] (**) evdev: A4TECH USB Device: Device: "/dev/input/event2"
    [ 475.230] (--) evdev: A4TECH USB Device: Vendor 0x9da Product 0x9090
    [ 475.231] (--) evdev: A4TECH USB Device: Found 20 mouse buttons
    [ 475.231] (--) evdev: A4TECH USB Device: Found scroll wheel(s)
    [ 475.231] (--) evdev: A4TECH USB Device: Found relative axes
    [ 475.231] (--) evdev: A4TECH USB Device: Found x and y relative axes
    [ 475.231] (II) evdev: A4TECH USB Device: Configuring as mouse
    [ 475.231] (II) evdev: A4TECH USB Device: Adding scrollwheel support
    [ 475.231] (**) evdev: A4TECH USB Device: YAxisMapping: buttons 4 and 5
    [ 475.231] (**) evdev: A4TECH USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 475.231] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.1/input/input2/event2"
    [ 475.231] (II) XINPUT: Adding extended input device "A4TECH USB Device" (type: MOUSE, id 9)
    [ 475.231] (II) evdev: A4TECH USB Device: initialized for relative axes.
    [ 475.231] (**) A4TECH USB Device: (accel) keeping acceleration scheme 1
    [ 475.231] (**) A4TECH USB Device: (accel) acceleration profile 0
    [ 475.231] (**) A4TECH USB Device: (accel) acceleration factor: 2.000
    [ 475.231] (**) A4TECH USB Device: (accel) acceleration threshold: 4
    [ 475.231] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/mouse0)
    [ 475.231] (II) No input driver specified, ignoring this device.
    [ 475.231] (II) This device may have been added with another device file.
    [ 475.232] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 475.232] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 475.232] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 475.232] (**) AT Translated Set 2 keyboard: always reports core events
    [ 475.232] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 475.232] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 475.232] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 475.232] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 475.232] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 475.232] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
    [ 475.232] (**) Option "xkb_rules" "evdev"
    [ 475.232] (**) Option "xkb_model" "evdev"
    [ 475.232] (**) Option "xkb_layout" "us"
    [ 480.188] (EE)
    [ 480.189] (EE) Backtrace:
    [ 480.189] (EE) 0: X (xorg_backtrace+0x3d) [0x57f48d]
    [ 480.189] (EE) 1: X (0x400000+0x1831e9) [0x5831e9]
    [ 480.189] (EE) 2: /usr/lib/libpthread.so.0 (0x7f10e9de6000+0xf0e0) [0x7f10e9df50e0]
    [ 480.189] (EE) 3: ?? [0x4106cb15]
    [ 480.189] (EE)
    [ 480.189] (EE) Segmentation fault at address 0x0
    [ 480.189]
    Fatal server error:
    [ 480.189] Caught signal 11 (Segmentation fault). Server aborting
    [ 480.189]
    [ 480.189] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 480.189] (EE) Please also check the log file at "/var/log/Xorg.2.log" for additional information.
    [ 480.189] (EE)
    [ 480.526] Server terminated with error (1). Closing log file.
    My system is fully updated and apparently video is fine:
    $ sudo pacman -Syyuw
    :: Synchronizing package databases...
    :: Starting full system upgrade...
    there is nothing to do
    $ glxinfo |grep '^Open\|^dir'
    direct rendering: Yes
    OpenGL vendor string: NVIDIA Corporation
    OpenGL renderer string: GeForce GTS 250/PCIe/SSE2
    OpenGL core profile version string: 3.3.0 NVIDIA 319.23
    OpenGL core profile shading language version string: 3.30 NVIDIA via Cg compiler
    OpenGL core profile context flags: (none)
    OpenGL core profile profile mask: core profile
    OpenGL core profile extensions:
    OpenGL version string: 3.3.0 NVIDIA 319.23
    OpenGL shading language version string: 3.30 NVIDIA via Cg compiler
    OpenGL context flags: (none)
    OpenGL profile mask: (none)
    OpenGL extensions:
    $
    I have no idea of what to try... any insight?
    Solved, it was really stupid. For some reason my Multilib repo got disable in the pacman config. So the 32bit nvidia drivers were old...
    Last edited by ezzetabi (2013-06-23 14:10:36)

    Yeah, sorry I didn't notice this post sooner, or I could have saved you some trouble shooting. 
    After testing and discussion on NVIDIA forums with someone else having the same problem, we realized that it is apparently a problem with any Xorg 1.7 release using Xinerama with a monitor positioned Left of another display.
    The person I was talking to said he bugged it, and rearranged his monitors right of.  I downgraded to xorg 1.6 and haven't given it too much though since.  I should probably follow up on that and submit a bug to xorg or something...  or you are welcome to!
    Works great with Xinerama turned off, which is actually a fine option for me since I don't tend to move windows between displays, except I am using Xinerama to work around an xmonad bug in handling multiple non-Xinerama displays.  I would have never caught it if I hadn't tried turning Xin on to fix the xmonad issue right before the 1.7 upgrade and gotten curious why my setup started going crazy (since I have a monitor with two monitors to the left of it)..
    One thing that also works is making your left most monitor screen 0 and setting the other two monitors to be RightOf it, or at least that worked for me.  Unfortunately, my left most monitor is a 46 inch tv that is often turned off or on a different input, so I can't really have it being screen 0.

  • [SOLVED] nvidia and xorg-server, slow start compared to nv

    I've seen many similar topics but none that have been solved, therefore the new topic.
    Starting xorg with nv driver takes just a few seconds to desktop, while using nvidia takes almost 10 seconds more to get to desktop. Although after reaching desktop everything works fine. I've used a minimal xorg.conf for each driver (replacing nvidia with nv):
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    EndSection
    The /var/log/Xorg.0.log when using nvidia:
    [ 22.779]
    X.Org X Server 1.12.2
    Release Date: 2012-05-29
    [ 22.779] X Protocol Version 11, Revision 0
    [ 22.779] Build Operating System: Linux 3.0.32-1-lts x86_64
    [ 22.779] Current Operating System: Linux yggdrasil 3.3.8-1-ARCH #1 SMP PREEMPT Tue Jun 5 15:20:32 CEST 2012 x86_64
    [ 22.779] Kernel command line: root=/dev/mapper/root cryptdevice=/dev/sda2:root ro vga=773 quiet
    [ 22.779] Build Date: 30 May 2012 07:24:13PM
    [ 22.779]
    [ 22.779] Current version of pixman: 0.26.0
    [ 22.779] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 22.779] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 22.779] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 9 21:37:16 2012
    [ 22.844] (==) Using config file: "/etc/X11/xorg.conf"
    [ 22.844] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 23.106] (==) No Layout section. Using the first Screen section.
    [ 23.106] (==) No screen section available. Using defaults.
    [ 23.106] (**) |-->Screen "Default Screen Section" (0)
    [ 23.106] (**) | |-->Monitor "<default monitor>"
    [ 23.106] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 23.106] (**) | |-->Device "Device0"
    [ 23.106] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 23.106] (==) Automatically adding devices
    [ 23.106] (==) Automatically enabling devices
    [ 23.219] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 23.219] Entry deleted from font path.
    [ 23.414] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 23.414] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 23.414] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 23.414] (II) Loader magic: 0x7c58e0
    [ 23.414] (II) Module ABI versions:
    [ 23.414] X.Org ANSI C Emulation: 0.4
    [ 23.414] X.Org Video Driver: 12.0
    [ 23.414] X.Org XInput driver : 16.0
    [ 23.414] X.Org Server Extension : 6.0
    [ 23.415] (--) PCI:*(0:2:0:0) 10de:0a70:144d:c079 rev 162, Mem @ 0xdc000000/16777216, 0xe0000000/268435456, 0xde000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
    [ 23.415] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 23.415] (II) LoadModule: "extmod"
    [ 23.453] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 23.487] (II) Module extmod: vendor="X.Org Foundation"
    [ 23.487] compiled for 1.12.2, module version = 1.0.0
    [ 23.487] Module class: X.Org Server Extension
    [ 23.487] ABI class: X.Org Server Extension, version 6.0
    [ 23.487] (II) Loading extension MIT-SCREEN-SAVER
    [ 23.487] (II) Loading extension XFree86-VidModeExtension
    [ 23.487] (II) Loading extension XFree86-DGA
    [ 23.487] (II) Loading extension DPMS
    [ 23.487] (II) Loading extension XVideo
    [ 23.487] (II) Loading extension XVideo-MotionCompensation
    [ 23.487] (II) Loading extension X-Resource
    [ 23.487] (II) LoadModule: "dbe"
    [ 23.487] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 23.512] (II) Module dbe: vendor="X.Org Foundation"
    [ 23.512] compiled for 1.12.2, module version = 1.0.0
    [ 23.512] Module class: X.Org Server Extension
    [ 23.512] ABI class: X.Org Server Extension, version 6.0
    [ 23.512] (II) Loading extension DOUBLE-BUFFER
    [ 23.512] (II) LoadModule: "glx"
    [ 23.512] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 26.824] (II) Module glx: vendor="NVIDIA Corporation"
    [ 26.868] compiled for 4.0.2, module version = 1.0.0
    [ 26.868] Module class: X.Org Server Extension
    [ 26.868] (II) NVIDIA GLX Module 295.53 Fri May 11 23:49:08 PDT 2012
    [ 26.869] (II) Loading extension GLX
    [ 26.869] (II) LoadModule: "record"
    [ 26.869] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 26.941] (II) Module record: vendor="X.Org Foundation"
    [ 26.941] compiled for 1.12.2, module version = 1.13.0
    [ 26.941] Module class: X.Org Server Extension
    [ 26.941] ABI class: X.Org Server Extension, version 6.0
    [ 26.941] (II) Loading extension RECORD
    [ 26.941] (II) LoadModule: "dri"
    [ 26.941] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 27.011] (II) Module dri: vendor="X.Org Foundation"
    [ 27.011] compiled for 1.12.2, module version = 1.0.0
    [ 27.011] ABI class: X.Org Server Extension, version 6.0
    [ 27.011] (II) Loading extension XFree86-DRI
    [ 27.011] (II) LoadModule: "dri2"
    [ 27.011] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 27.046] (II) Module dri2: vendor="X.Org Foundation"
    [ 27.047] compiled for 1.12.2, module version = 1.2.0
    [ 27.047] ABI class: X.Org Server Extension, version 6.0
    [ 27.047] (II) Loading extension DRI2
    [ 27.047] (II) LoadModule: "nvidia"
    [ 27.122] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 27.306] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 27.306] compiled for 4.0.2, module version = 1.0.0
    [ 27.306] Module class: X.Org Video Driver
    [ 27.608] (II) NVIDIA dlloader X Driver 295.53 Fri May 11 23:29:56 PDT 2012
    [ 27.608] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 27.617] (++) using VT number 7
    [ 27.678] (II) Loading sub module "fb"
    [ 27.678] (II) LoadModule: "fb"
    [ 27.850] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 27.870] (II) Module fb: vendor="X.Org Foundation"
    [ 27.870] compiled for 1.12.2, module version = 1.0.0
    [ 27.870] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 27.870] (II) Loading sub module "wfb"
    [ 27.870] (II) LoadModule: "wfb"
    [ 27.871] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 27.879] (II) Module wfb: vendor="X.Org Foundation"
    [ 27.879] compiled for 1.12.2, module version = 1.0.0
    [ 27.879] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 27.879] (II) Loading sub module "ramdac"
    [ 27.879] (II) LoadModule: "ramdac"
    [ 27.879] (II) Module "ramdac" already built-in
    [ 27.934] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 27.934] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    [ 27.934] (==) NVIDIA(0): RGB weight 888
    [ 27.934] (==) NVIDIA(0): Default visual is TrueColor
    [ 27.934] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 27.935] (**) NVIDIA(0): Enabling 2D acceleration
    [ 29.873] (II) NVIDIA(GPU-0): Display (Chi Mei Optoelectronics corp. (DFP-0)) does not
    [ 29.873] (II) NVIDIA(GPU-0): support NVIDIA 3D Vision stereo.
    [ 30.786] (II) NVIDIA(0): NVIDIA GPU GeForce 310M (GT218) at PCI:2:0:0 (GPU-0)
    [ 30.786] (--) NVIDIA(0): Memory: 524288 kBytes
    [ 30.786] (--) NVIDIA(0): VideoBIOS: 70.18.53.00.ff
    [ 30.786] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 30.786] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    [ 30.789] (--) NVIDIA(0): Connected display device(s) on GeForce 310M at PCI:2:0:0
    [ 30.789] (--) NVIDIA(0): Chi Mei Optoelectronics corp. (DFP-0)
    [ 30.789] (--) NVIDIA(0): Chi Mei Optoelectronics corp. (DFP-0): 330.0 MHz maximum pixel
    [ 30.789] (--) NVIDIA(0): clock
    [ 30.789] (--) NVIDIA(0): Chi Mei Optoelectronics corp. (DFP-0): Internal Dual Link
    [ 30.789] (--) NVIDIA(0): LVDS
    [ 30.789] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 30.789] (**) NVIDIA(0): device Chi Mei Optoelectronics corp. (DFP-0) (Using EDID
    [ 30.789] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 30.836] (II) NVIDIA(0): Assigned Display Device: DFP-0
    [ 30.836] (==) NVIDIA(0):
    [ 30.836] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [ 30.836] (==) NVIDIA(0): will be used as the requested mode.
    [ 30.836] (==) NVIDIA(0):
    [ 30.836] (II) NVIDIA(0): Validated modes:
    [ 30.836] (II) NVIDIA(0): "nvidia-auto-select"
    [ 30.836] (II) NVIDIA(0): Virtual screen size determined to be 1366 x 768
    [ 31.892] (--) NVIDIA(0): DPI set to (99, 102); computed from "UseEdidDpi" X config
    [ 31.892] (--) NVIDIA(0): option
    [ 31.892] (--) Depth 24 pixmap format is 32 bpp
    [ 31.892] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
    [ 31.900] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
    [ 34.862] (II) Loading extension NV-GLX
    [ 37.299] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 37.299] (==) NVIDIA(0): Backing store disabled
    [ 37.299] (==) NVIDIA(0): Silken mouse enabled
    [ 37.300] (==) NVIDIA(0): DPMS enabled
    [ 37.300] (II) Loading extension NV-CONTROL
    [ 37.300] (II) Loading extension XINERAMA
    [ 37.300] (II) Loading sub module "dri2"
    [ 37.300] (II) LoadModule: "dri2"
    [ 37.300] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 37.300] (II) Module dri2: vendor="X.Org Foundation"
    [ 37.300] compiled for 1.12.2, module version = 1.2.0
    [ 37.300] ABI class: X.Org Server Extension, version 6.0
    [ 37.300] (II) NVIDIA(0): [DRI2] Setup complete
    [ 37.300] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 37.301] (==) RandR enabled
    [ 37.301] (II) Initializing built-in extension Generic Event Extension
    [ 37.301] (II) Initializing built-in extension SHAPE
    [ 37.301] (II) Initializing built-in extension MIT-SHM
    [ 37.301] (II) Initializing built-in extension XInputExtension
    [ 37.301] (II) Initializing built-in extension XTEST
    [ 37.301] (II) Initializing built-in extension BIG-REQUESTS
    [ 37.301] (II) Initializing built-in extension SYNC
    [ 37.301] (II) Initializing built-in extension XKEYBOARD
    [ 37.301] (II) Initializing built-in extension XC-MISC
    [ 37.301] (II) Initializing built-in extension SECURITY
    [ 37.301] (II) Initializing built-in extension XINERAMA
    [ 37.301] (II) Initializing built-in extension XFIXES
    [ 37.301] (II) Initializing built-in extension RENDER
    [ 37.301] (II) Initializing built-in extension RANDR
    [ 37.301] (II) Initializing built-in extension COMPOSITE
    [ 37.301] (II) Initializing built-in extension DAMAGE
    [ 37.302] (II) Initializing extension GLX
    [ 38.717] (II) config/udev: Adding input device Power Button (/dev/input/event6)
    [ 38.717] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 38.717] (**) Power Button: Applying InputClass "Keyboard Defaults"
    [ 38.717] (II) LoadModule: "evdev"
    [ 38.717] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 38.769] (II) Module evdev: vendor="X.Org Foundation"
    [ 38.769] compiled for 1.12.0, module version = 2.7.0
    [ 38.769] Module class: X.Org XInput Driver
    [ 38.769] ABI class: X.Org XInput driver, version 16.0
    [ 38.769] (II) Using input driver 'evdev' for 'Power Button'
    [ 38.769] (**) Power Button: always reports core events
    [ 38.769] (**) evdev: Power Button: Device: "/dev/input/event6"
    [ 38.769] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 38.769] (--) evdev: Power Button: Found keys
    [ 38.769] (II) evdev: Power Button: Configuring as keyboard
    [ 38.769] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
    [ 38.769] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 38.769] (**) Option "xkb_rules" "evdev"
    [ 38.769] (**) Option "xkb_model" "evdev"
    [ 38.769] (**) Option "xkb_layout" "se"
    [ 38.835] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
    [ 38.835] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 38.835] (**) Video Bus: Applying InputClass "Keyboard Defaults"
    [ 38.835] (II) Using input driver 'evdev' for 'Video Bus'
    [ 38.835] (**) Video Bus: always reports core events
    [ 38.835] (**) evdev: Video Bus: Device: "/dev/input/event7"
    [ 38.835] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 38.835] (--) evdev: Video Bus: Found keys
    [ 38.835] (II) evdev: Video Bus: Configuring as keyboard
    [ 38.835] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7/event7"
    [ 38.835] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 38.836] (**) Option "xkb_rules" "evdev"
    [ 38.836] (**) Option "xkb_model" "evdev"
    [ 38.836] (**) Option "xkb_layout" "se"
    [ 38.837] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 38.837] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 38.837] (**) Power Button: Applying InputClass "Keyboard Defaults"
    [ 38.837] (II) Using input driver 'evdev' for 'Power Button'
    [ 38.837] (**) Power Button: always reports core events
    [ 38.837] (**) evdev: Power Button: Device: "/dev/input/event4"
    [ 38.837] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 38.837] (--) evdev: Power Button: Found keys
    [ 38.837] (II) evdev: Power Button: Configuring as keyboard
    [ 38.837] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
    [ 38.837] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
    [ 38.837] (**) Option "xkb_rules" "evdev"
    [ 38.837] (**) Option "xkb_model" "evdev"
    [ 38.837] (**) Option "xkb_layout" "se"
    [ 38.838] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
    [ 38.838] (II) No input driver specified, ignoring this device.
    [ 38.838] (II) This device may have been added with another device file.
    [ 38.838] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
    [ 38.838] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 38.838] (**) Sleep Button: Applying InputClass "Keyboard Defaults"
    [ 38.838] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 38.838] (**) Sleep Button: always reports core events
    [ 38.838] (**) evdev: Sleep Button: Device: "/dev/input/event5"
    [ 38.839] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [ 38.839] (--) evdev: Sleep Button: Found keys
    [ 38.839] (II) evdev: Sleep Button: Configuring as keyboard
    [ 38.839] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5/event5"
    [ 38.839] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
    [ 38.839] (**) Option "xkb_rules" "evdev"
    [ 38.839] (**) Option "xkb_model" "evdev"
    [ 38.839] (**) Option "xkb_layout" "se"
    [ 38.840] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event13)
    [ 38.840] (II) No input driver specified, ignoring this device.
    [ 38.840] (II) This device may have been added with another device file.
    [ 38.840] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event14)
    [ 38.840] (II) No input driver specified, ignoring this device.
    [ 38.840] (II) This device may have been added with another device file.
    [ 38.841] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event15)
    [ 38.841] (II) No input driver specified, ignoring this device.
    [ 38.841] (II) This device may have been added with another device file.
    [ 38.841] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event16)
    [ 38.841] (II) No input driver specified, ignoring this device.
    [ 38.841] (II) This device may have been added with another device file.
    [ 38.842] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
    [ 38.842] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
    [ 38.842] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
    [ 38.842] (**) Logitech USB Receiver: always reports core events
    [ 38.842] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
    [ 38.842] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521
    [ 38.842] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
    [ 38.842] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
    [ 38.842] (--) evdev: Logitech USB Receiver: Found relative axes
    [ 38.842] (--) evdev: Logitech USB Receiver: Found x and y relative axes
    [ 38.842] (II) evdev: Logitech USB Receiver: Configuring as mouse
    [ 38.842] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
    [ 38.842] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    [ 38.842] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 38.842] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input1/event1"
    [ 38.842] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 10)
    [ 38.843] (II) evdev: Logitech USB Receiver: initialized for relative axes.
    [ 38.843] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
    [ 38.843] (**) Logitech USB Receiver: (accel) acceleration profile 0
    [ 38.843] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
    [ 38.843] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
    [ 38.844] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
    [ 38.844] (II) No input driver specified, ignoring this device.
    [ 38.844] (II) This device may have been added with another device file.
    [ 38.844] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
    [ 38.844] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
    [ 38.844] (**) Logitech USB Receiver: Applying InputClass "Keyboard Defaults"
    [ 38.844] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
    [ 38.844] (**) Logitech USB Receiver: always reports core events
    [ 38.844] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event2"
    [ 38.844] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521
    [ 38.844] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
    [ 38.844] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
    [ 38.845] (--) evdev: Logitech USB Receiver: Found relative axes
    [ 38.845] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
    [ 38.845] (--) evdev: Logitech USB Receiver: Found absolute axes
    [ 38.845] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
    [ 38.845] (--) evdev: Logitech USB Receiver: Found keys
    [ 38.845] (II) evdev: Logitech USB Receiver: Configuring as mouse
    [ 38.845] (II) evdev: Logitech USB Receiver: Configuring as keyboard
    [ 38.845] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
    [ 38.845] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    [ 38.845] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 38.845] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input2/event2"
    [ 38.845] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
    [ 38.845] (**) Option "xkb_rules" "evdev"
    [ 38.845] (**) Option "xkb_model" "evdev"
    [ 38.845] (**) Option "xkb_layout" "se"
    [ 38.845] (II) evdev: Logitech USB Receiver: initialized for relative axes.
    [ 38.845] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
    [ 38.846] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
    [ 38.846] (**) Logitech USB Receiver: (accel) acceleration profile 0
    [ 38.846] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
    [ 38.846] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
    [ 38.846] (II) config/udev: Adding input device USB 2.0 PC Camera (/dev/input/event10)
    [ 38.846] (**) USB 2.0 PC Camera: Applying InputClass "evdev keyboard catchall"
    [ 38.846] (**) USB 2.0 PC Camera: Applying InputClass "Keyboard Defaults"
    [ 38.846] (II) Using input driver 'evdev' for 'USB 2.0 PC Camera'
    [ 38.846] (**) USB 2.0 PC Camera: always reports core events
    [ 38.846] (**) evdev: USB 2.0 PC Camera: Device: "/dev/input/event10"
    [ 38.846] (--) evdev: USB 2.0 PC Camera: Vendor 0x1210 Product 0x25f4
    [ 38.846] (--) evdev: USB 2.0 PC Camera: Found keys
    [ 38.846] (II) evdev: USB 2.0 PC Camera: Configuring as keyboard
    [ 38.846] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10/event10"
    [ 38.846] (II) XINPUT: Adding extended input device "USB 2.0 PC Camera" (type: KEYBOARD, id 12)
    [ 38.846] (**) Option "xkb_rules" "evdev"
    [ 38.846] (**) Option "xkb_model" "evdev"
    [ 38.847] (**) Option "xkb_layout" "se"
    [ 38.847] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event11)
    [ 38.847] (II) No input driver specified, ignoring this device.
    [ 38.847] (II) This device may have been added with another device file.
    [ 38.847] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event12)
    [ 38.847] (II) No input driver specified, ignoring this device.
    [ 38.847] (II) This device may have been added with another device file.
    [ 38.847] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 38.847] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 38.847] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Defaults"
    [ 38.847] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 38.847] (**) AT Translated Set 2 keyboard: always reports core events
    [ 38.847] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 38.847] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 38.847] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 38.847] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 38.848] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 38.848] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
    [ 38.848] (**) Option "xkb_rules" "evdev"
    [ 38.848] (**) Option "xkb_model" "evdev"
    [ 38.848] (**) Option "xkb_layout" "se"
    [ 38.848] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
    [ 38.848] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 38.848] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 38.848] (II) LoadModule: "synaptics"
    [ 38.848] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 38.911] (II) Module synaptics: vendor="X.Org Foundation"
    [ 38.911] compiled for 1.12.1, module version = 1.6.1
    [ 38.911] Module class: X.Org XInput Driver
    [ 38.911] ABI class: X.Org XInput driver, version 16.0
    [ 38.911] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    [ 38.911] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 38.911] (**) Option "Device" "/dev/input/event9"
    [ 38.911] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
    [ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5672
    [ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4910
    [ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
    [ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
    [ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 38.911] (**) Option "TapButton1" "1"
    [ 38.911] (**) Option "TapButton2" "2"
    [ 38.911] (**) Option "TapButton3" "3"
    [ 38.912] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 38.912] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 38.912] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
    [ 38.912] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
    [ 38.912] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    [ 38.912] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
    [ 38.912] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
    [ 38.912] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 38.912] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    [ 38.912] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 38.912] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 38.912] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 38.913] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
    [ 38.913] (II) No input driver specified, ignoring this device.
    [ 38.913] (II) This device may have been added with another device file.
    [ 38.913] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
    [ 38.913] (II) No input driver specified, ignoring this device.
    [ 38.913] (II) This device may have been added with another device file.
    The /var/log/Xorg.0.log when using nv:
    [ 52.162]
    X.Org X Server 1.12.2
    Release Date: 2012-05-29
    [ 52.163] X Protocol Version 11, Revision 0
    [ 52.163] Build Operating System: Linux 3.0.32-1-lts x86_64
    [ 52.164] Current Operating System: Linux yggdrasil 3.3.8-1-ARCH #1 SMP PREEMPT Tue Jun 5 15:20:32 CEST 2012 x86_64
    [ 52.164] Kernel command line: root=/dev/mapper/root cryptdevice=/dev/sda2:root ro vga=773 quiet
    [ 52.165] Build Date: 30 May 2012 07:24:13PM
    [ 52.165]
    [ 52.165] Current version of pixman: 0.26.0
    [ 52.166] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 52.166] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 52.168] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 9 21:30:26 2012
    [ 52.168] (==) Using config file: "/etc/X11/xorg.conf"
    [ 52.168] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 52.168] (==) No Layout section. Using the first Screen section.
    [ 52.168] (==) No screen section available. Using defaults.
    [ 52.168] (**) |-->Screen "Default Screen Section" (0)
    [ 52.168] (**) | |-->Monitor "<default monitor>"
    [ 52.168] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 52.168] (**) | |-->Device "Device0"
    [ 52.168] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 52.169] (==) Automatically adding devices
    [ 52.169] (==) Automatically enabling devices
    [ 52.169] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 52.169] Entry deleted from font path.
    [ 52.169] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 52.169] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 52.169] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 52.169] (II) Loader magic: 0x7c58e0
    [ 52.169] (II) Module ABI versions:
    [ 52.169] X.Org ANSI C Emulation: 0.4
    [ 52.169] X.Org Video Driver: 12.0
    [ 52.169] X.Org XInput driver : 16.0
    [ 52.169] X.Org Server Extension : 6.0
    [ 52.169] (--) PCI:*(0:2:0:0) 10de:0a70:144d:c079 rev 162, Mem @ 0xdc000000/16777216, 0xe0000000/268435456, 0xde000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
    [ 52.170] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 52.170] (II) LoadModule: "extmod"
    [ 52.170] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 52.170] (II) Module extmod: vendor="X.Org Foundation"
    [ 52.170] compiled for 1.12.2, module version = 1.0.0
    [ 52.170] Module class: X.Org Server Extension
    [ 52.170] ABI class: X.Org Server Extension, version 6.0
    [ 52.170] (II) Loading extension MIT-SCREEN-SAVER
    [ 52.170] (II) Loading extension XFree86-VidModeExtension
    [ 52.170] (II) Loading extension XFree86-DGA
    [ 52.170] (II) Loading extension DPMS
    [ 52.170] (II) Loading extension XVideo
    [ 52.170] (II) Loading extension XVideo-MotionCompensation
    [ 52.170] (II) Loading extension X-Resource
    [ 52.170] (II) LoadModule: "dbe"
    [ 52.170] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 52.170] (II) Module dbe: vendor="X.Org Foundation"
    [ 52.170] compiled for 1.12.2, module version = 1.0.0
    [ 52.170] Module class: X.Org Server Extension
    [ 52.170] ABI class: X.Org Server Extension, version 6.0
    [ 52.170] (II) Loading extension DOUBLE-BUFFER
    [ 52.170] (II) LoadModule: "glx"
    [ 52.170] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 52.180] (II) Module glx: vendor="NVIDIA Corporation"
    [ 52.180] compiled for 4.0.2, module version = 1.0.0
    [ 52.180] Module class: X.Org Server Extension
    [ 52.180] (II) NVIDIA GLX Module 295.53 Fri May 11 23:49:08 PDT 2012
    [ 52.180] (II) Loading extension GLX
    [ 52.180] (II) LoadModule: "record"
    [ 52.180] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 52.180] (II) Module record: vendor="X.Org Foundation"
    [ 52.180] compiled for 1.12.2, module version = 1.13.0
    [ 52.180] Module class: X.Org Server Extension
    [ 52.180] ABI class: X.Org Server Extension, version 6.0
    [ 52.180] (II) Loading extension RECORD
    [ 52.180] (II) LoadModule: "dri"
    [ 52.180] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 52.180] (II) Module dri: vendor="X.Org Foundation"
    [ 52.180] compiled for 1.12.2, module version = 1.0.0
    [ 52.180] ABI class: X.Org Server Extension, version 6.0
    [ 52.180] (II) Loading extension XFree86-DRI
    [ 52.180] (II) LoadModule: "dri2"
    [ 52.180] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 52.181] (II) Module dri2: vendor="X.Org Foundation"
    [ 52.181] compiled for 1.12.2, module version = 1.2.0
    [ 52.181] ABI class: X.Org Server Extension, version 6.0
    [ 52.181] (II) Loading extension DRI2
    [ 52.181] (II) LoadModule: "nv"
    [ 52.181] (II) Loading /usr/lib/xorg/modules/drivers/nv_drv.so
    [ 52.181] (II) Module nv: vendor="X.Org Foundation"
    [ 52.181] compiled for 1.12.0.901, module version = 2.1.18
    [ 52.181] Module class: X.Org Video Driver
    [ 52.181] ABI class: X.Org Video Driver, version 12.0
    [ 52.181] (II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
    Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
    Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
    GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
    GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
    Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
    GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
    GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
    GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
    GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
    GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
    GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
    Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
    GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
    GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
    GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
    Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
    GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
    Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
    GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
    GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
    GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
    GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
    GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
    GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
    Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
    GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
    GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
    GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
    GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
    GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
    Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
    GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
    GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
    GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
    GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
    Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
    GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
    GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
    GeForce Go 6600, GeForce Go 6600 GT, Quadro NVS 440, Quadro FX 550,
    Quadro FX 550, Quadro FX 540, GeForce 6200, GeForce 6500,
    GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
    GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
    GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 7100 GS,
    GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT,
    GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
    GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
    GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7350 LE,
    GeForce 7300 LE, GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300,
    GeForce Go 7400, GeForce Go 7400 GS, Quadro NVS 110M,
    Quadro NVS 120M, Quadro FX 350M, GeForce 7500 LE, Quadro FX 350,
    GeForce 7300 GS, GeForce 7650 GS, GeForce 7600 GT, GeForce 7600 GS,
    GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT, GeForce Go 7700,
    GeForce Go 7600, GeForce Go 7600 GT, Quadro NVS 300M,
    GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560, GeForce 7900 GTX,
    GeForce 7900 GT, GeForce 7900 GS, GeForce 7950 GX2, GeForce 7950 GX2,
    GeForce 7950 GT, GeForce Go 7950 GTX, GeForce Go 7900 GS,
    GeForce Go 7900 GTX, Quadro FX 2500M, Quadro FX 1500M,
    Quadro FX 5500, Quadro FX 3500, Quadro FX 1500, Quadro FX 4500 X2,
    GeForce 6150, GeForce 6150 LE, GeForce 6100, GeForce Go 6150,
    Quadro NVS 210S / NVIDIA GeForce 6150LE, GeForce Go 6100,
    GeForce 6150SE, GeForce 6100 nForce 405, GeForce 6100 nForce 400,
    GeForce 6100 nForce 420, GeForce 7150M / nForce 630M,
    GeForce 7000M / nForce 610M, GeForce 7050 PV / nForce 630a,
    GeForce 7050 PV / nForce 630a, GeForce 7025 / nForce 630a,
    GeForce 8800 GTX, GeForce 8800 GTS, GeForce 8800 Ultra,
    Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS, GeForce 8600 GT,
    GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS, GeForce 9500M GS,
    GeForce 8300 GS, GeForce 8600M GT, GeForce 9650M GS,
    GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M,
    Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce GT 330,
    GeForce 8400 SE, GeForce 8500 GT, GeForce 8400 GS, GeForce 8300 GS,
    GeForce 8400 GS, GeForce 8600M GS, GeForce 8400M GT,
    GeForce 8400M GS, GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M,
    Quadro NVS 135M, GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G,
    Quadro NVS 290, GeForce GTX 295, GeForce GTX 280, GeForce GTX 260,
    GeForce GTX 285, GeForce GTX 275, GeForce GTX 260, GeForce GTX 295,
    Quadroplex 2200 D2, Quadroplex 2200 S4, Quadro CX, Quadro FX 5800,
    Quadro FX 4800, Quadro FX 3800, GeForce 8800 GTS 512,
    GeForce 9800 GT, GeForce 8800 GT, GeForce GT 230, GeForce 9800 GX2,
    GeForce 9800 GT, GeForce 8800 GS, GeForce GTS 240, GeForce 9800M GTX,
    GeForce 8800M GTS, GeForce GTX 280M, GeForce 9800M GT,
    GeForce 8800M GTX, GeForce 8800 GS, GeForce GTX 285M,
    GeForce 9600 GSO, GeForce 8800 GT, GeForce 9800 GTX/9800 GTX+,
    GeForce 9800 GTX+, GeForce 9800 GT, GeForce GTS 250,
    GeForce 9800M GTX, GeForce GTX 260M, Quadro FX 4700 X2,
    Quadro FX 3700, Quadro VX 200, Quadro FX 3600M, Quadro FX 2800M,
    Quadro FX 3700M, Quadro FX 3800M, GeForce 9600 GT, GeForce 9600 GS,
    GeForce 9600 GSO 512, GeForce GT 130, GeForce GT 140,
    GeForce 9800M GTS, GeForce 9700M GTS, GeForce 9800M GS,
    GeForce 9800M GTS, GeForce 9600 GT, GeForce 9600 GT,
    GeForce GTS 160M, GeForce GTS 150M, GeForce 9600 GSO,
    GeForce 9600 GT, Quadro FX 1800, Quadro FX 2700M, GeForce 9500 GT,
    GeForce 9400 GT, GeForce 9500 GT, GeForce 9500 GS, GeForce 9500 GS,
    GeForce GT 120, GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT,
    GeForce 9700M GT, GeForce 9500M G, GeForce 9650M GT, GeForce G 110M,
    GeForce GT 130M, GeForce GT 120M, GeForce GT 220M, GeForce 9650 S,
    Quadro FX 380, Quadro FX 580, Quadro FX 1700M, GeForce 9400 GT,
    Quadro FX 770M, GeForce 9300 GE, GeForce 9300 GS, GeForce 8400,
    GeForce 8400 SE, GeForce 8400 GS, GeForce 9300M GS, GeForce G100,
    GeForce 9300 SE, GeForce 9200M GS, GeForce 9300M GS, Quadro NVS 150M,
    Quadro NVS 160M, GeForce G 105M, GeForce G 103M, GeForce G105M,
    Quadro NVS 420, Quadro FX 370 LP, Quadro NVS 450, Quadro FX 370M,
    Quadro NVS 295, GeForce 9100M G, GeForce 8200M G, GeForce 9200,
    GeForce 9100, GeForce 8300, GeForce 8200, nForce 730a, GeForce 9200,
    nForce 980a/780a SLI, nForce 750a SLI, GeForce 8100 / nForce 720a,
    GeForce 9400, GeForce 9400, GeForce 9400M G, GeForce 9400M,
    GeForce 9300, ION, GeForce 9400M G, GeForce 9400, nForce 760i SLI,
    GeForce 9400, GeForce 9300 / nForce 730i, GeForce 9200,
    GeForce 9100M G, GeForce 8200M G, GeForce 9400M, GeForce 9200,
    GeForce G102M, GeForce G102M, ION, ION, GeForce 9400, ION, ION LE,
    ION LE, GeForce GT 220, GeForce 315, GeForce 210, GeForce GT 230M,
    GeForce GT 330M, GeForce GT 230M, GeForce GT 330M, NVS 5100M,
    GeForce GT 320M, GeForce GT 240M, GeForce GT 325M, Quadro FX 880M,
    GeForce G210, GeForce 205, GeForce 310, ION, GeForce 210,
    GeForce 310, GeForce 315, GeForce G105M, GeForce G105M, NVS 2100M,
    NVS 3100M, GeForce 305M, ION, GeForce 310M, GeForce 305M,
    GeForce 310M, GeForce 305M, GeForce G210M, GeForce 310M,
    Quadro FX 380 LP, Quadro FX 380M, GeForce GT 330, GeForce GT 320,
    GeForce GT 240, GeForce GT 340, GeForce GT 330, GeForce GTS 260M,
    GeForce GTS 250M, GeForce 315, GeForce GT 335M, GeForce GTS 350M,
    GeForce GTS 360M, Quadro FX 1800M
    [ 52.183] (--) using VT number 7
    [ 52.211] (--) NV: Found NVIDIA GeForce 310M at 02@00:00:0
    [ 52.211] (II) Loading sub module "int10"
    [ 52.211] (II) LoadModule: "int10"
    [ 52.211] (II) Loading /usr/lib/xorg/modules/libint10.so
    [ 52.233] (II) Module int10: vendor="X.Org Foundation"
    [ 52.233] compiled for 1.12.2, module version = 1.0.0
    [ 52.233] ABI class: X.Org Video Driver, version 12.0
    [ 52.233] (II) NV(0): Initializing int10
    [ 52.234] (II) NV(0): Bad V_BIOS checksum
    [ 52.234] (II) NV(0): Primary V_BIOS segment is: 0xc000
    [ 52.234] (--) NV(0): Console is VGA mode 0x105
    [ 52.234] (II) NV(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 52.234] (==) NV(0): Depth 24, (--) framebuffer bpp 32
    [ 52.234] (==) NV(0): RGB weight 888
    [ 52.234] (==) NV(0): Default visual is TrueColor
    [ 52.235] (==) NV(0): Using hardware cursor
    [ 52.235] (==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 52.245] (II) NV(0): MMIO registers mapped at 0x7f5b4a0aa000
    [ 52.245] (--) NV(0): Total video RAM: 512.0 MB
    [ 52.245] (--) NV(0): BAR1 size: 256.0 MB
    [ 52.245] (--) NV(0): Mapped memory: 256.0 MB
    [ 52.317] (II) NV(0): Linear framebuffer mapped at 0x7f5b3a0aa000
    [ 52.317] (II) Loading sub module "i2c"
    [ 52.317] (II) LoadModule: "i2c"
    [ 52.317] (II) Module "i2c" already built-in
    [ 52.317] (II) Loading sub module "ddc"
    [ 52.317] (II) LoadModule: "ddc"
    [ 52.317] (II) Module "ddc" already built-in
    [ 52.317] (--) NV(0): Connector map:
    [ 52.317] (--) NV(0): Bus 3 -> SOR0 (LVDS)
    [ 52.317] (--) NV(0): Bus 0 -> DAC1
    [ 52.317] (--) NV(0): Bus 8 -> SOR3
    [ 52.317] (--) NV(0): Load detection: 340
    [ 52.317] (II) NV(0): I2C bus "I2C0" initialized.
    [ 52.317] (II) NV(0): Output VGA1 has no monitor section
    [ 52.317] (II) NV(0): I2C bus "I2C8" initialized.
    [ 52.317] (II) NV(0): Output DVI3 has no monitor section
    [ 52.317] (II) NV(0): LVDS native size 1366x768
    [ 52.317] (II) NV(0): Output LVDS has no monitor section
    [ 52.317] (II) NV(0): I2C bus "I2C3 (LVDS)" initialized.
    [ 52.317] (II) NV(0): Probing for EDID on I2C bus 0...
    [ 52.317] (II) NV(0): I2C device "I2C0:ddc2" registered at address 0xA0.
    [ 52.321] (II) NV(0): ... none found
    [ 52.321] (--) NV(0): Trying load detection on VGA1 ... nothing.
    [ 52.366] (II) NV(0): EDID for output VGA1
    [ 52.366] (II) NV(0): Probing for EDID on I2C bus 8...
    [ 52.366] (II) NV(0): I2C device "I2C8:ddc2" registered at address 0xA0.
    [ 52.370] (II) NV(0): ... none found
    [ 52.370] (II) NV(0): EDID for output DVI3
    [ 52.370] (II) NV(0): Probing for EDID on I2C bus 3...
    [ 52.370] (II) NV(0): I2C device "I2C3 (LVDS):ddc2" registered at address 0xA0.
    [ 52.422] (--) NV(0): DDC detected a DFP:
    [ 52.422] (II) NV(0): Manufacturer: CMO Model: 1680 Serial#: 0
    [ 52.422] (II) NV(0): Year: 2009 Week: 4
    [ 52.422] (II) NV(0): EDID Version: 1.3
    [ 52.422] (II) NV(0): Digital Display Input
    [ 52.422] (II) NV(0): Max Image Size [cm]: horiz.: 35 vert.: 19
    [ 52.422] (II) NV(0): Gamma: 2.20
    [ 52.422] (II) NV(0): No DPMS capabilities specified
    [ 52.422] (II) NV(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 52.422] (II) NV(0): First detailed timing is preferred mode
    [ 52.422] (II) NV(0): redX: 0.602 redY: 0.340 greenX: 0.306 greenY: 0.530
    [ 52.422] (II) NV(0): blueX: 0.151 blueY: 0.120 whiteX: 0.313 whiteY: 0.329
    [ 52.422] (II) NV(0): Manufacturer's mask: 0
    [ 52.422] (II) NV(0): Supported detailed timing:
    [ 52.422] (II) NV(0): clock: 75.5 MHz Image Size: 344 x 193 mm
    [ 52.422] (II) NV(0): h_active: 1366 h_sync: 1397 h_sync_end 1462 h_blank_end 1560 h_border: 0
    [ 52.422] (II) NV(0): v_active: 768 v_sync: 772 v_sync_end 784 v_blanking: 806 v_border: 0
    [ 52.422] (II) NV(0): N156B6-L06
    [ 52.422] (II) NV(0): CMO
    [ 52.422] (II) NV(0): N156B6-L06
    [ 52.422] (II) NV(0): EDID (in hex):
    [ 52.422] (II) NV(0): 00ffffffffffff000daf801600000000
    [ 52.422] (II) NV(0): 04130103802313780a07f59a574e8726
    [ 52.422] (II) NV(0): 1e505400000001010101010101010101
    [ 52.422] (II) NV(0): 0101010101017e1d56c2500026301f41
    [ 52.422] (II) NV(0): 4c0058c110000018000000fe004e3135
    [ 52.422] (II) NV(0): 3642362d4c30360a2020000000fe0043
    [ 52.422] (II) NV(0): 4d4f0a202020202020202020000000fe
    [ 52.422] (II) NV(0): 004e31353642362d4c30360a20200048
    [ 52.422] (II) NV(0): EDID for output LVDS
    [ 52.422] (II) NV(0): Manufacturer: CMO Model: 1680 Serial#: 0
    [ 52.422] (II) NV(0): Year: 2009 Week: 4
    [ 52.422] (II) NV(0): EDID Version: 1.3
    [ 52.422] (II) NV(0): Digital Display Input
    [ 52.422] (II) NV(0): Max Image Size [cm]: horiz.: 35 vert.: 19
    [ 52.422] (II) NV(0): Gamma: 2.20
    [ 52.422] (II) NV(0): No DPMS capabilities specified
    [ 52.422] (II) NV(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 52.422] (II) NV(0): First detailed timing is preferred mode
    [ 52.422] (II) NV(0): redX: 0.602 redY: 0.340 greenX: 0.306 greenY: 0.530
    [ 52.422] (II) NV(0): blueX: 0.151 blueY: 0.120 whiteX: 0.313 whiteY: 0.329
    [ 52.422] (II) NV(0): Manufacturer's mask: 0
    [ 52.422] (II) NV(0): Supported detailed timing:
    [ 52.422] (II) NV(0): clock: 75.5 MHz Image Size: 344 x 193 mm
    [ 52.422] (II) NV(0): h_active: 1366 h_sync: 1397 h_sync_end 1462 h_blank_end 1560 h_border: 0
    [ 52.422] (II) NV(0): v_active: 768 v_sync: 772 v_sync_end 784 v_blanking: 806 v_border: 0
    [ 52.422] (II) NV(0): N156B6-L06
    [ 52.422] (II) NV(0): CMO
    [ 52.422] (II) NV(0): N156B6-L06
    [ 52.422] (II) NV(0): EDID (in hex):
    [ 52.422] (II) NV(0): 00ffffffffffff000daf801600000000
    [ 52.422] (II) NV(0): 04130103802313780a07f59a574e8726
    [ 52.422] (II) NV(0): 1e505400000001010101010101010101
    [ 52.422] (II) NV(0): 0101010101017e1d56c2500026301f41
    [ 52.422] (II) NV(0): 4c0058c110000018000000fe004e3135
    [ 52.422] (II) NV(0): 3642362d4c30360a2020000000fe0043
    [ 52.422] (II) NV(0): 4d4f0a202020202020202020000000fe
    [ 52.422] (II) NV(0): 004e31353642362d4c30360a20200048
    [ 52.422] (II) NV(0): EDID vendor "CMO", prod id 5760
    [ 52.422] (II) NV(0): Printing probed modes for output LVDS
    [ 52.422] (II) NV(0): Modeline "1366x768"x60.0 75.50 1366 1397 1462 1560 768 772 784 806 -hsync -vsync (48.4 kHz eP)
    [ 52.422] (II) NV(0): Output VGA1 disconnected
    [ 52.422] (II) NV(0): Output DVI3 disconnected
    [ 52.422] (II) NV(0): Output LVDS connected
    [ 52.422] (II) NV(0): Using exact sizes for initial modes
    [ 52.422] (II) NV(0): Output LVDS using initial mode 1366x768
    [ 52.422] (II) NV(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 52.422] (--) NV(0): Virtual size is 1366x1366 (pitch 1536)
    [ 52.422] (**) NV(0): Driver mode "1366x768": 75.5 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
    [ 52.422] (II) NV(0): Modeline "1366x768"x60.0 75.50 1366 1397 1462 1560 768 772 784 806 -hsync -vsync (48.4 kHz eP)
    [ 52.422] (==) NV(0): DPI set to (96, 96)
    [ 52.422] (II) Loading sub module "fb"
    [ 52.422] (II) LoadModule: "fb"
    [ 52.433] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 52.447] (II) Module fb: vendor="X.Org Foundation"
    [ 52.447] compiled for 1.12.2, module version = 1.0.0
    [ 52.447] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 52.447] (II) Loading sub module "xaa"
    [ 52.447] (II) LoadModule: "xaa"
    [ 52.447] (II) Loading /usr/lib/xorg/modules/libxaa.so
    [ 52.458] (II) Module xaa: vendor="X.Org Foundation"
    [ 52.458] compiled for 1.12.2, module version = 1.2.1
    [ 52.458] ABI class: X.Org Video Driver, version 12.0
    [ 52.458] (II) Loading sub module "ramdac"
    [ 52.458] (II) LoadModule: "ramdac"
    [ 52.458] (II) Module "ramdac" already built-in
    [ 52.458] (--) Depth 24 pixmap format is 32 bpp
    [ 52.475] (--) NV(0): 183.99 MB available for offscreen pixmaps
    [ 52.507] (II) NV(0): Using XFree86 Acceleration Architecture (XAA)
    [ 52.507] Screen to screen bit blits
    [ 52.507] Solid filled rectangles
    [ 52.507] 8x8 mono pattern filled rectangles
    [ 52.507] Indirect CPU to Screen color expansion
    [ 52.507] Solid Lines
    [ 52.507] Scanline Image Writes
    [ 52.508] Setting up tile and stipple cache:
    [ 52.508] 32 128x128 slots
    [ 52.508] 32 256x256 slots
    [ 52.508] 16 512x512 slots
    [ 52.508] (==) NV(0): Backing store disabled
    [ 52.508] (==) NV(0): Silken mouse enabled
    [ 52.508] (II) NV(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 52.508] (==) NV(0): DPMS enabled
    [ 55.081] (--) RandR disabled
    [ 55.081] (II) Initializing built-in extension Generic Event Extension
    [ 55.081] (II) Initializing built-in extension SHAPE
    [ 55.081] (II) Initializing built-in extension MIT-SHM
    [ 55.081] (II) Initializing built-in extension XInputExtension
    [ 55.081] (II) Initializing built-in extension XTEST
    [ 55.081] (II) Initializing built-in extension BIG-REQUESTS
    [ 55.081] (II) Initializing built-in extension SYNC
    [ 55.081] (II) Initializing built-in extension XKEYBOARD
    [ 55.081] (II) Initializing built-in extension XC-MISC
    [ 55.081] (II) Initializing built-in extension SECURITY
    [ 55.081] (II) Initializing built-in extension XINERAMA
    [ 55.081] (II) Initializing built-in extension XFIXES
    [ 55.081] (II) Initializing built-in extension RENDER
    [ 55.081] (II) Initializing built-in extension RANDR
    [ 55.081] (II) Initializing built-in extension COMPOSITE
    [ 55.081] (II) Initializing built-in extension DAMAGE
    [ 55.103] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
    [ 55.132] (II) NV(0): Setting screen physical size to 361 x 203
    [ 55.715] (II) config/udev: Adding input device Power Button (/dev/input/event6)
    [ 55.715] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 55.715] (**) Power Button: Applying InputClass "Keyboard Defaults"
    [ 55.715] (II) LoadModule: "evdev"
    [ 55.715] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 55.725] (II) Module evdev: vendor="X.Org Foundation"
    [ 55.725] compiled for 1.12.0, module version = 2.7.0
    [ 55.725] Module class: X.Org XInput Driver
    [ 55.725] ABI class: X.Org XInput driver, version 16.0
    [ 55.725] (II) Using input driver 'evdev' for 'Power Button'
    [ 55.725] (**) Power Button: always reports core events
    [ 55.725] (**) evdev: Power Button: Device: "/dev/input/event6"
    [ 55.725] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 55.725] (--) evdev: Power Button: Found keys
    [ 55.725] (II) evdev: Power Button: Configuring as keyboard
    [ 55.725] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
    [ 55.725] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 55.725] (**) Option "xkb_rules" "evdev"
    [ 55.725] (**) Option "xkb_model" "evdev"
    [ 55.725] (**) Option "xkb_layout" "se"
    [ 55.918] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
    [ 55.918] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 55.918] (**) Video Bus: Applying InputClass "Keyboard Defaults"
    [ 55.918] (II) Using input driver 'evdev' for 'Video Bus'
    [ 55.918] (**) Video Bus: always reports core events
    [ 55.918] (**) evdev: Video Bus: Device: "/dev/input/event7"
    [ 55.918] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 55.918] (--) evdev: Video Bus: Found keys
    [ 55.918] (II) evdev: Video Bus: Configuring as keyboard
    [ 55.918] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7/event7"
    [ 55.918] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 55.918] (**) Option "xkb_rules" "evdev"
    [ 55.918] (**) Option "xkb_model" "evdev"
    [ 55.918] (**) Option "xkb_layout" "se"
    [ 55.919] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 55.919] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 55.919] (**) Power Button: Applying InputClass "Keyboard Defaults"
    [ 55.919] (II) Using input driver 'evdev' for 'Power Button'
    [ 55.919] (**) Power Button: always reports core events
    [ 55.919] (**) evdev: Power Button: Device: "/dev/input/event4"
    [ 55.919] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 55.919] (--) evdev: Power Button: Found keys
    [ 55.919] (II) evdev: Power Button: Configuring as keyboard
    [ 55.919] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
    [ 55.919] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
    [ 55.919] (**) Option "xkb_rules" "evdev"
    [ 55.919] (**) Option "xkb_model" "evdev"
    [ 55.919] (**) Option "xkb_layout" "se"
    [ 55.920] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
    [ 55.920] (II) No input driver specified, ignoring this device.
    [ 55.920] (II) This device may have been added with another device file.
    [ 55.921] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
    [ 55.921] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 55.921] (**) Sleep Button: Applying InputClass "Keyboard Defaults"
    [ 55.921] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 55.921] (**) Sleep Button: always reports core events
    [ 55.921] (**) evdev: Sleep Button: Device: "/dev/input/event5"
    [ 55.921] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [ 55.921] (--) evdev: Sleep Button: Found keys
    [ 55.921] (II) evdev: Sleep Button: Configuring as keyboard
    [ 55.921] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5/event5"
    [ 55.921] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
    [ 55.921] (**) Option "xkb_rules" "evdev"
    [ 55.921] (**) Option "xkb_model" "evdev"
    [ 55.921] (**) Option "xkb_layout" "se"
    [ 55.922] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event13)
    [ 55.922] (II) No input driver specified, ignoring this device.
    [ 55.922] (II) This device may have been added with another device file.
    [ 55.923] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event14)
    [ 55.923] (II) No input driver specified, ignoring this device.
    [ 55.923] (II) This device may have been added with another device file.
    [ 55.923] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event15)
    [ 55.923] (II) No input driver specified, ignoring this device.
    [ 55.923] (II) This device may have been added with another device file.
    [ 55.924] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event16)
    [ 55.924] (II) No input driver specified, ignoring this device.
    [ 55.924] (II) This device may have been added with another device file.
    [ 55.924] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
    [ 55.924] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
    [ 55.924] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
    [ 55.924] (**) Logitech USB Receiver: always reports core events
    [ 55.924] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
    [ 55.925] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521
    [ 55.925] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
    [ 55.925] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
    [ 55.925] (--) evdev: Logitech USB Receiver: Found relative axes
    [ 55.925] (--) evdev: Logitech USB Receiver: Found x and y relative axes
    [ 55.925] (II) evdev: Logitech USB Receiver: Configuring as mouse
    [ 55.925] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
    [ 55.925] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    [ 55.925] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 55.925] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input1/event1"
    [ 55.925] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 10)
    [ 55.925] (II) evdev: Logitech USB Receiver: initialized for relative axes.
    [ 55.925] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
    [ 55.925] (**) Logitech USB Receiver: (accel) acceleration profile 0
    [ 55.925] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
    [ 55.925] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
    [ 55.926] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
    [ 55.926] (II) No input driver specified, ignoring this device.
    [ 55.926] (II) This device may have been added with another device file.
    [ 55.926] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
    [ 55.927] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
    [ 55.927] (**) Logitech USB Receiver: Applying InputClass "Keyboard Defaults"
    [ 55.927] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
    [ 55.927] (**) Logitech USB Receiver: always reports core events
    [ 55.927] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event2"
    [ 55.927] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521
    [ 55.927] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
    [ 55.927] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
    [ 55.927] (--) evdev: Logitech USB Receiver: Found relative axes
    [ 55.927] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
    [ 55.927] (--) evdev: Logitech USB Receiver: Found absolute axes
    [ 55.927] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
    [ 55.927] (--) evdev: Logitech USB Receiver: Found keys
    [ 55.927] (II) evdev: Logitech USB Receiver: Configuring as mouse
    [ 55.927] (II) evdev: Logitech USB Receiver: Configuring as keyboard
    [ 55.927] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
    [ 55.927] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    [ 55.927] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 55.927] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input2/event2"
    [ 55.927] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
    [ 55.927] (**) Option "xkb_rules" "evdev"
    [ 55.927] (**) Option "xkb_model" "evdev"
    [ 55.927] (**) Option "xkb_layout" "se"
    [ 55.927] (II) evdev: Logitech USB Receiver: initialized for relative axes.
    [ 55.927] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
    [ 55.927] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
    [ 55.927] (**) Logitech USB Receiver: (accel) acceleration profile 0
    [ 55.927] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
    [ 55.927] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
    [ 55.927] (II) config/udev: Adding input device USB 2.0 PC Camera (/dev/input/event10)
    [ 55.927] (**) USB 2.0 PC Camera: Applying InputClass "evdev keyboard catchall"
    [ 55.927] (**) USB 2.0 PC Camera: Applying InputClass "Keyboard Defaults"
    [ 55.927] (II) Using input driver 'evdev' for 'USB 2.0 PC Camera'
    [ 55.927] (**) USB 2.0 PC Camera: always reports core events
    [ 55.927] (**) evdev: USB 2.0 PC Camera: Device: "/dev/input/event10"
    [ 55.927] (--) evdev: USB 2.0 PC Camera: Vendor 0x1210 Product 0x25f4
    [ 55.927] (--) evdev: USB 2.0 PC Camera: Found keys
    [ 55.927] (II) evdev: USB 2.0 PC Camera: Configuring as keyboard
    [ 55.927] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10/event10"
    [ 55.927] (II) XINPUT: Adding extended input device "USB 2.0 PC Camera" (type: KEYBOARD, id 12)
    [ 55.927] (**) Option "xkb_rules" "evdev"
    [ 55.927] (**) Option "xkb_model" "evdev"
    [ 55.927] (**) Option "xkb_layout" "se"
    [ 55.928] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event11)
    [ 55.928] (II) No input driver specified, ignoring this device.
    [ 55.928] (II) This device may have been added with another device file.
    [ 55.928] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event12)
    [ 55.928] (II) No input driver specified, ignoring this device.
    [ 55.928] (II) This device may have been added with another device file.
    [ 55.928] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 55.928] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 55.928] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Defaults"
    [ 55.928] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 55.928] (**) AT Translated Set 2 keyboard: always reports core events
    [ 55.928] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 55.928] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 55.928] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 55.928] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 55.929] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 55.929] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
    [ 55.929] (**) Option "xkb_rules" "evdev"
    [ 55.929] (**) Option "xkb_model" "evdev"
    [ 55.929] (**) Option "xkb_layout" "se"
    [ 55.929] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
    [ 55.929] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 55.929] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 55.929] (II) LoadModule: "synaptics"
    [ 55.929] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 55.967] (II) Module synaptics: vendor="X.Org Foundation"
    [ 55.967] compiled for 1.12.1, module version = 1.6.1
    [ 55.967] Module class: X.Org XInput Driver
    [ 55.967] ABI class: X.Org XInput driver, version 16.0
    [ 55.967] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    [ 55.967] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 55.967] (**) Option "Device" "/dev/input/event9"
    [ 55.967] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
    [ 55.967] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5672
    [ 55.967] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4910
    [ 55.967] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 55.967] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
    [ 55.968] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
    [ 55.968] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 55.968] (**) Option "TapButton1" "1"
    [ 55.968] (**) Option "TapButton2" "2"
    [ 55.968] (**) Option "TapButton3" "3"
    [ 55.968] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 55.968] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 55.968] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
    [ 55.968] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
    [ 55.968] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    [ 55.968] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
    [ 55.968] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
    [ 55.969] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 55.969] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    [ 55.969] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 55.969] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 55.969] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 55.969] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
    [ 55.969] (II) No input driver specified, ignoring this device.
    [ 55.969] (II) This device may have been added with another device file.
    [ 55.970] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
    [ 55.970] (II) No input driver specified, ignoring this device.
    [ 55.970] (II) This device may have been added with another device file.
    From what I can tell it is something with the nvidia driver that doesn't play well with xorg.  Perhaps some kind of autodetection that takes long time to finish. Anyone got any ideas how to solve this?
    Last edited by Larsson (2012-06-13 18:59:43)

    Didn't see they where timestamps . Yes it seems that glx is one cause of the delay. I've tried some different xorg.conf, and it's always ligglx.so or  NV-GLX that slows it down. Any suggestions on how I can speed this up?
    ps. The computer is ok. Although the garddrive is a SATA 3.0Gb/s, 5400 RPM.  But I don't think this is the problem?

  • [SOLVED] - X won't start - Missing modules??

    Hello all, thanks for looking.
    I have installed from the Arch from the latest media, and followed the Begginers Guide.
    I have installed to a partition on my hard disk, one of many, and installed Grub and the mbr.
    The system boots fine. ALSA works, Xorg is installed, and pacman -Syu says "nothing to do"
    It all seems fine except... X won't start.
    I type startx and get the following errors in the /var/log/Xorg.0.log file :
    [   263.878]
    X.Org X Server 1.13.1
    Release Date: 2012-12-13
    [   263.879] X Protocol Version 11, Revision 0
    [   263.879] Build Operating System: Linux 3.7.0-1-ARCH i686
    [   263.879] Current Operating System: Linux midnightsun 3.6.11-1-ARCH #1 SMP PREEMPT Tue Dec 18 12:58:46 CET 2012 i686
    [   263.879] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=64b15d8f-85f1-412a-8fa9-fd054849176e ro quiet
    [   263.880] Build Date: 16 December 2012  04:52:09PM
    [   263.880] 
    [   263.880] Current version of pixman: 0.28.2
    [   263.880]     Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
    [   263.880] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [   263.881] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 14 23:36:51 2013
    [   263.882] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [   263.882] (==) No Layout section.  Using the first Screen section.
    [   263.882] (==) No screen section available. Using defaults.
    [   263.882] (**) |-->Screen "Default Screen Section" (0)
    [   263.882] (**) |   |-->Monitor "<default monitor>"
    [   263.882] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
    [   263.882] (==) Automatically adding devices
    [   263.882] (==) Automatically enabling devices
    [   263.882] (==) Automatically adding GPU devices
    [   263.882] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
    [   263.882]     Entry deleted from font path.
    [   263.882] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [   263.882]     Entry deleted from font path.
    [   263.882] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [   263.882]     Entry deleted from font path.
    [   263.882] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [   263.882]     Entry deleted from font path.
    [   263.882]     (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [   263.882] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [   263.882]     Entry deleted from font path.
    [   263.882]     (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [   263.882] (==) FontPath set to:
        /usr/share/fonts/misc/
    [   263.882] (==) ModulePath set to "/usr/lib/xorg/modules"
    [   263.882] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
    [   263.882] (II) Loader magic: 0x825a640
    [   263.882] (II) Module ABI versions:
    [   263.882]     X.Org ANSI C Emulation: 0.4
    [   263.882]     X.Org Video Driver: 13.1
    [   263.882]     X.Org XInput driver : 18.0
    [   263.882]     X.Org Server Extension : 7.0
    [   263.883] (II) config/udev: Adding drm device (/dev/dri/card0)
    [   263.884] (--) PCI:*(0:1:0:0) 10de:0402:0000:0000 rev 161, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000cc00/128, BIOS @ 0x????????/131072
    [   263.884] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [   263.885] Initializing built-in extension Generic Event Extension
    [   263.885] Initializing built-in extension SHAPE
    [   263.885] Initializing built-in extension MIT-SHM
    [   263.885] Initializing built-in extension XInputExtension
    [   263.886] Initializing built-in extension XTEST
    [   263.886] Initializing built-in extension BIG-REQUESTS
    [   263.886] Initializing built-in extension SYNC
    [   263.886] Initializing built-in extension XKEYBOARD
    [   263.887] Initializing built-in extension XC-MISC
    [   263.887] Initializing built-in extension SECURITY
    [   263.887] Initializing built-in extension XINERAMA
    [   263.887] Initializing built-in extension XFIXES
    [   263.887] Initializing built-in extension RENDER
    [   263.888] Initializing built-in extension RANDR
    [   263.888] Initializing built-in extension COMPOSITE
    [   263.888] Initializing built-in extension DAMAGE
    [   263.888] Initializing built-in extension MIT-SCREEN-SAVER
    [   263.888] Initializing built-in extension DOUBLE-BUFFER
    [   263.889] Initializing built-in extension RECORD
    [   263.889] Initializing built-in extension DPMS
    [   263.889] Initializing built-in extension X-Resource
    [   263.889] Initializing built-in extension XVideo
    [   263.889] Initializing built-in extension XVideo-MotionCompensation
    [   263.889] Initializing built-in extension XFree86-VidModeExtension
    [   263.890] Initializing built-in extension XFree86-DGA
    [   263.890] Initializing built-in extension XFree86-DRI
    [   263.890] Initializing built-in extension DRI2
    [   263.890] (II) LoadModule: "glx"
    [   263.890] (WW) Warning, couldn't open module glx
    [   263.890] (II) UnloadModule: "glx"
    [   263.890] (II) Unloading glx
    [   263.890] (EE) Failed to load module "glx" (module does not exist, 0)
    [   263.890] (==) Matched nouveau as autoconfigured driver 0
    [   263.890] (==) Matched nvidia as autoconfigured driver 1
    [   263.890] (==) Matched nv as autoconfigured driver 2
    [   263.890] (==) Matched nouveau as autoconfigured driver 3
    [   263.890] (==) Matched nvidia as autoconfigured driver 4
    [   263.890] (==) Matched nv as autoconfigured driver 5
    [   263.890] (==) Matched vesa as autoconfigured driver 6
    [   263.890] (==) Matched modesetting as autoconfigured driver 7
    [   263.890] (==) Matched fbdev as autoconfigured driver 8
    [   263.890] (==) Assigned the driver to the xf86ConfigLayout
    [   263.890] (II) LoadModule: "nouveau"
    [   263.891] (WW) Warning, couldn't open module nouveau
    [   263.891] (II) UnloadModule: "nouveau"
    [   263.891] (II) Unloading nouveau
    [   263.891] (EE) Failed to load module "nouveau" (module does not exist, 0)
    [   263.891] (II) LoadModule: "nvidia"
    [   263.891] (WW) Warning, couldn't open module nvidia
    [   263.891] (II) UnloadModule: "nvidia"
    [   263.891] (II) Unloading nvidia
    [   263.891] (EE) Failed to load module "nvidia" (module does not exist, 0)
    [   263.891] (II) LoadModule: "nv"
    [   263.891] (II) Loading /usr/lib/xorg/modules/drivers/nv_drv.so
    [   263.891] (II) Module nv: vendor="X.Org Foundation"
    [   263.891]     compiled for 1.13.0, module version = 2.1.20
    [   263.891]     Module class: X.Org Video Driver
    [   263.891]     ABI class: X.Org Video Driver, version 13.0
    [   263.891] (II) LoadModule: "vesa"
    [   263.891] (WW) Warning, couldn't open module vesa
    [   263.891] (II) UnloadModule: "vesa"
    [   263.891] (II) Unloading vesa
    [   263.891] (EE) Failed to load module "vesa" (module does not exist, 0)
    [   263.891] (II) LoadModule: "modesetting"
    [   263.892] (WW) Warning, couldn't open module modesetting
    [   263.892] (II) UnloadModule: "modesetting"
    [   263.892] (II) Unloading modesetting
    [   263.892] (EE) Failed to load module "modesetting" (module does not exist, 0)
    [   263.892] (II) LoadModule: "fbdev"
    [   263.892] (WW) Warning, couldn't open module fbdev
    [   263.892] (II) UnloadModule: "fbdev"
    [   263.892] (II) Unloading fbdev
    [   263.892] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [   263.892] (II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
        Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
        Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
        GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
        GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
        Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
        GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
        GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
        GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
        GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
        GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
        GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
        Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
        GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
        GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
        GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
        Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
        GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
        Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
        GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
        GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
        GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
        GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
        GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
        GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
        Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
        GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
        GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
        GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
        GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
        GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
        Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
        GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
        GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
        GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
        GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
        Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
        GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
        GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
        GeForce Go 6600, GeForce Go 6600 GT, Quadro NVS 440, Quadro FX 550,
        Quadro FX 550, Quadro FX 540, GeForce 6200, GeForce 6500,
        GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
        GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
        GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 7100 GS,
        GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT,
        GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
        GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
        GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7350 LE,
        GeForce 7300 LE, GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300,
        GeForce Go 7400, GeForce Go 7400 GS, Quadro NVS 110M,
        Quadro NVS 120M, Quadro FX 350M, GeForce 7500 LE, Quadro FX 350,
        GeForce 7300 GS, GeForce 7650 GS, GeForce 7600 GT, GeForce 7600 GS,
        GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT, GeForce Go 7700,
        GeForce Go 7600, GeForce Go 7600 GT, Quadro NVS 300M,
        GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560, GeForce 7900 GTX,
        GeForce 7900 GT, GeForce 7900 GS, GeForce 7950 GX2, GeForce 7950 GX2,
        GeForce 7950 GT, GeForce Go 7950 GTX, GeForce Go 7900 GS,
        GeForce Go 7900 GTX, Quadro FX 2500M, Quadro FX 1500M,
        Quadro FX 5500, Quadro FX 3500, Quadro FX 1500, Quadro FX 4500 X2,
        GeForce 6150, GeForce 6150 LE, GeForce 6100, GeForce Go 6150,
        Quadro NVS 210S / NVIDIA GeForce 6150LE, GeForce Go 6100,
        GeForce 6150SE, GeForce 6100 nForce 405, GeForce 6100 nForce 400,
        GeForce 6100 nForce 420, GeForce 7150M / nForce 630M,
        GeForce 7000M / nForce 610M, GeForce 7050 PV / nForce 630a,
        GeForce 7050 PV / nForce 630a, GeForce 7025 / nForce 630a,
        GeForce 8800 GTX, GeForce 8800 GTS, GeForce 8800 Ultra,
        Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS, GeForce 8600 GT,
        GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS, GeForce 9500M GS,
        GeForce 8300 GS, GeForce 8600M GT, GeForce 9650M GS,
        GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M,
        Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce GT 330,
        GeForce 8400 SE, GeForce 8500 GT, GeForce 8400 GS, GeForce 8300 GS,
        GeForce 8400 GS, GeForce 8600M GS, GeForce 8400M GT,
        GeForce 8400M GS, GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M,
        Quadro NVS 135M, GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G,
        Quadro NVS 290, GeForce GTX 295, GeForce GTX 280, GeForce GTX 260,
        GeForce GTX 285, GeForce GTX 275, GeForce GTX 260, GeForce GTX 295,
        Quadroplex 2200 D2, Quadroplex 2200 S4, Quadro CX, Quadro FX 5800,
        Quadro FX 4800, Quadro FX 3800, GeForce 8800 GTS 512,
        GeForce 9800 GT, GeForce 8800 GT, GeForce GT 230, GeForce 9800 GX2,
        GeForce 9800 GT, GeForce 8800 GS, GeForce GTS 240, GeForce 9800M GTX,
        GeForce 8800M GTS, GeForce GTX 280M, GeForce 9800M GT,
        GeForce 8800M GTX, GeForce 8800 GS, GeForce GTX 285M,
        GeForce 9600 GSO, GeForce 8800 GT, GeForce 9800 GTX/9800 GTX+,
        GeForce 9800 GTX+, GeForce 9800 GT, GeForce GTS 250,
        GeForce 9800M GTX, GeForce GTX 260M, Quadro FX 4700 X2,
        Quadro FX 3700, Quadro VX 200, Quadro FX 3600M, Quadro FX 2800M,
        Quadro FX 3700M, Quadro FX 3800M, GeForce 9600 GT, GeForce 9600 GS,
        GeForce 9600 GSO 512, GeForce GT 130, GeForce GT 140,
        GeForce 9800M GTS, GeForce 9700M GTS, GeForce 9800M GS,
        GeForce 9800M GTS, GeForce 9600 GT, GeForce 9600 GT,
        GeForce GTS 160M, GeForce GTS 150M, GeForce 9600 GSO,
        GeForce 9600 GT, Quadro FX 1800, Quadro FX 2700M, GeForce 9500 GT,
        GeForce 9400 GT, GeForce 9500 GT, GeForce 9500 GS, GeForce 9500 GS,
        GeForce GT 120, GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT,
        GeForce 9700M GT, GeForce 9500M G, GeForce 9650M GT, GeForce G 110M,
        GeForce GT 130M, GeForce GT 120M, GeForce GT 220M, GeForce 9650 S,
        Quadro FX 380, Quadro FX 580, Quadro FX 1700M, GeForce 9400 GT,
        Quadro FX 770M, GeForce 9300 GE, GeForce 9300 GS, GeForce 8400,
        GeForce 8400 SE, GeForce 8400 GS, GeForce 9300M GS, GeForce G100,
        GeForce 9300 SE, GeForce 9200M GS, GeForce 9300M GS, Quadro NVS 150M,
        Quadro NVS 160M, GeForce G 105M, GeForce G 103M, GeForce G105M,
        Quadro NVS 420, Quadro FX 370 LP, Quadro NVS 450, Quadro FX 370M,
        Quadro NVS 295, GeForce 9100M G, GeForce 8200M G, GeForce 9200,
        GeForce 9100, GeForce 8300, GeForce 8200, nForce 730a, GeForce 9200,
        nForce 980a/780a SLI, nForce 750a SLI, GeForce 8100 / nForce 720a,
        GeForce 9400, GeForce 9400, GeForce 9400M G, GeForce 9400M,
        GeForce 9300, ION, GeForce 9400M G, GeForce 9400, nForce 760i SLI,
        GeForce 9400, GeForce 9300 / nForce 730i, GeForce 9200,
        GeForce 9100M G, GeForce 8200M G, GeForce 9400M, GeForce 9200,
        GeForce G102M, GeForce G102M, ION, ION, GeForce 9400, ION, ION LE,
        ION LE, GeForce GT 220, GeForce 315, GeForce 210, GeForce GT 230M,
        GeForce GT 330M, GeForce GT 230M, GeForce GT 330M, NVS 5100M,
        GeForce GT 320M, GeForce GT 240M, GeForce GT 325M, Quadro FX 880M,
        GeForce G210, GeForce 205, GeForce 310, ION, GeForce 210,
        GeForce 310, GeForce 315, GeForce G105M, GeForce G105M, NVS 2100M,
        NVS 3100M, GeForce 305M, ION, GeForce 310M, GeForce 305M,
        GeForce 310M, GeForce 305M, GeForce G210M, GeForce 310M,
        Quadro FX 380 LP, Quadro FX 380M, GeForce GT 330, GeForce GT 320,
        GeForce GT 240, GeForce GT 340, GeForce GT 330, GeForce GTS 260M,
        GeForce GTS 250M, GeForce 315, GeForce GT 335M, GeForce GTS 350M,
        GeForce GTS 360M, Quadro FX 1800M
    [   263.895] (++) using VT number 1
    [   263.895] (EE) NV: The PCI device 0x10de0402 (GeForce 8600 GT) at 01@00:00:0 has a kernel module claiming it.
    [   263.895] (EE) NV: This driver cannot operate until it has been unloaded.
    [   263.895] (EE) NV: The PCI device 0x10de0402 (GeForce 8600 GT) at 01@00:00:0 has a kernel module claiming it.
    [   263.895] (EE) NV: This driver cannot operate until it has been unloaded.
    [   263.895] (EE) No devices detected.
    [   263.895]
    Fatal server error:
    [   263.895] no screens found
    [   263.895] (EE)
    Please consult the The X.Org Foundation support
         at http://wiki.x.org
    for help.
    [   263.895] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [   263.896] (EE)
    It appears that some modules are missing, and indeed none of those mentioned in the errors are there if I do lsmod.
    But that is about the limit of my understanding.
    Can anyone tell me how to add the modules if they aren't even on the machine at all.
    Pacman doesn't find them. For example pacman -S glx gives package not found.
    Any ideas or pointers much appreciated.
    Last edited by Midnight Sun (2013-01-16 00:01:35)

    I Can't Believe It
    NOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO!
    I swear I checked that 6 hours ago when I first tried startx.
    OH
    MY
    GOD
    Just give me a moment to calm down..........
    OK. Thank you. You are completely and joyously right.
    It would seem that I had neglected to install the video driver.
    Thanks for that.

  • Titan Z GPU Compatibil​ity with a D20

    I have a D20 4155 with and Xeon X5687 single processor and 12 MB RAM.  I currently have a Quadro 4000 Video Card installed.  I create flow simulations that are extremely math intensive and can take days to complete relying only on the CPU.  
    I am looking into a new software that utilizes the processing power of the GPU but they do not recommend the Quadro 4000 and therefore they do not support it.   The only ones they will support are Nvidia Tesla K40, Nvidia Tesla K80, GeForce GTX Titan Black and GeForce GTX Titan Z.  
    The GeForce GTX TITAN Z is in my price range and the one I would like to use.
    My main question is will my D20 system handle this work horse of a GPU?
    2nd question is can I install it along side of the Quatro 4000 which I use for my dual monitors and just use the Titan Z for the computations.
    Thank you for any help.
    Solved!
    Go to Solution.

    welcome to the forum
    with a TDP of 375W, i don't see a reliable way to provide enough power to a titan Z in the D20 while running alongside a Q4000 and an X5687.   you're likely going to exceed one of the power rails with this combo.   on top of that, nvidia doesn't support mixing quadro and geforce cards in the same system so this would be uncharted territory from both a driver conflict and reliability standpoint.
    conversely, the K40 has a 235W TDP and should work in the D20 with the caveat that it's not been tested or qualified in the D20.   the other catch here is that nvidia also doesn't officially support mixing quadro and kepler cards, although these have a far greater chance of interoperability than geforce and quadro since driver families aren't being mixed.
    my vote would be on the K40, keeping in mind that you might want to consider a kepler-based card as your display card to replace the Q4000.   for this i would suggest a K2000 or K200D since it performs on-level with the Q4000 and frees up a PCIe power drop to use with the K40.
    there's no way i'd recommend the titan Z in your system whatsoever.
    ThinkStation C20
    ThinkPad X1C · X220 · X60T · s30 · 600

  • Rep tells me my Duel Xeons not support GTX Titan

    i own/use a workstation computer for editing hd video and 2d animation - i don't game. when i purchased the machine a few years ago, a rep at the company told me that my duel xeons would only support quadro based (workstation) cards. i'm looking to upgrade the overall performance of my machine, be it a geforce gtx titan or 600-700 level gpu, or upgrading my processors, but i need to make sure that i indeed CAN switch to geforce from quadro. below are my straight from my invoice.
    Intel Motherboard Dual Socket Xeon S5520SC
    Intel Xeon CPU Fan Heatsink STS100C
    2 x 2.26GHz Intel "Nehalem" Xeon Quad Core [8MB]
    12GB 1333MHz DDR3 Triple Channel SDRAM (6 x 2GB)
    1TB High Speed Hard Drive [64MB Cache, 7200RPM]
    StormDrive Dual Layer CD/DVD Writer
    850W Silent Power Supply
    Windows 7 Pro [64-bit]
    NVIDIA Quadro FX 3800 Workstation Graphics Accelerator [1GB]
    PCI 3 Port FireWire [TI Chipset]
    (additional) 1TB High Performance Drive [64MB Cache SATA 3 6GB]
    (additional) 2 TB High Performance Drive [64MB Cache SATA 3 6GB]
    ALSO, can anyone attest to which is better (on the whole): geforce or quadro?

    You system would handle a Titan card but most of the available processing in the card would go unused. The Geforce cards right now have better specs than the Quadros accept for the extremely expensive K6000 which is equal to a Titan. When dealing with the Hardware MPE engine the specs of the cards decide the performance the GPU adds. Nothing specific to the Quadro cards effect the performance in Adobe. Now you can get 10bit color Preview with the Quadros in Adobe and you cant with the Geforce cards. The Geforce cards only support 10bit color via Direct X and Adobe uses Open GL. Beyond that a Geforce card would be far better suited. I would suggest a Geforce GTX760 or GTX770 card. Both would give you the best performance you will see from that system with GPU Acceleration.
    Eric
    ADK

  • Running Steam

    When running steam, it says: "OpenGL GLX extensions not supported by display".
    What can I do to solve this?
    More info:
    Samsung Laptop w/ Dual GPUs (intel & nvidia). Nvidia driver installed (I assume the system only uses the nvidia GPU and I'm fine with that).
    Steam command line output:
    [gilnaa@localhost ~]$ steam > st.log
    [gilnaa@localhost ~]$ cat st.log
    Running Steam on arch 64-bit
    STEAM_RUNTIME is enabled automatically
    Installing breakpad exception handler for appid(steam)/version(1407966480_client)
    Xlib: extension "GLX" missing on display ":0.0".
    Installing breakpad exception handler for appid(steam)/version(1407966480)
    Installing breakpad exception handler for appid(steam)/version(1407966480)
    Xlib: extension "GLX" missing on display ":0.0".
    Xlib: extension "GLX" missing on display ":0.0".
    OpenGL GLX extension not supported by displayAssert( Assertion Failed: Fatal Error: OpenGL GLX extension not supported by display ):/home/buildbot/buildslave_steam/steam_rel_client_ubuntu12_linux/build/src/steamUI/Main.cpp:284
    Installing breakpad exception handler for appid(steam)/version(1407966480)
    Uploading dump (out-of-process) [proxy '']
    /tmp/dumps/assert_20140823162512_5.dmp
    [gilnaa@localhost ~]$ glxinfo
    name of display: :0.0
    Xlib: extension "GLX" missing on display ":0.0".
    Xlib: extension "GLX" missing on display ":0.0".
    Xlib: extension "GLX" missing on display ":0.0".
    Xlib: extension "GLX" missing on display ":0.0".
    Xlib: extension "GLX" missing on display ":0.0".
    Xlib: extension "GLX" missing on display ":0.0".
    Xlib: extension "GLX" missing on display ":0.0".
    Error: couldn't find RGB GLX visual or fbconfig
    Xlib: extension "GLX" missing on display ":0.0".
    Xlib: extension "GLX" missing on display ":0.0".
    Xlib: extension "GLX" missing on display ":0.0".
    Xlib: extension "GLX" missing on display ":0.0".
    Xlib: extension "GLX" missing on display ":0.0".
    Xlib: extension "GLX" missing on display ":0.0".
    Xlib: extension "GLX" missing on display ":0.0".
    Xlib: extension "GLX" missing on display ":0.0".
    Xlib: extension "GLX" missing on display ":0.0".
    Xlib: extension "GLX" missing on display ":0.0".
    [gilnaa@localhost ~]$ glxgears
    Xlib: extension "GLX" missing on display ":0.0".
    Error: couldn't get an RGB, Double-buffered visual
    [multilib] is enabled. I've also installed (manually):
    multilib/lib32-nvidia-utils 340.32-1
    multilib/lib32-mesa 10.2.6-1
    multilib/lib32-mesa-demos 8.2.0-2
    extra/mesa-demos 8.2.0-3
    multilib/lib32-nvidia-libgl 340.32-1
    How can I make steam work?

    Still doesn't work.
    I've tried running `nvidia-xconfig` (which I havn't before), but after that, xorg cannot find the screen.
    How can I make sure that the NVIDIA driver is the active GPU driver?
    Edit: I ran nvidia-settings and it assured me I was NOT running the nvidia driver. It advised me to run nvidia-xconfig, after which xorg server won't start (i'll try again and get a specific log file)
    Edit 2:
    Here is the Xorg log:
    [ 15.411]
    X.Org X Server 1.16.0
    Release Date: 2014-07-16
    [ 15.411] X Protocol Version 11, Revision 0
    [ 15.411] Build Operating System: Linux 3.15.5-2-ARCH x86_64
    [ 15.411] Current Operating System: Linux localhost 3.16.1-1-ARCH #1 SMP PREEMPT Thu Aug 14 07:40:19 CEST 2014 x86_64
    [ 15.411] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda6 rw
    [ 15.411] Build Date: 31 July 2014 11:53:19AM
    [ 15.411]
    [ 15.411] Current version of pixman: 0.32.6
    [ 15.411] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 15.411] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 15.411] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 23 21:17:29 2014
    [ 15.502] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 15.582] (==) No Layout section. Using the first Screen section.
    [ 15.582] (==) No screen section available. Using defaults.
    [ 15.582] (**) |-->Screen "Default Screen Section" (0)
    [ 15.582] (**) | |-->Monitor "<default monitor>"
    [ 15.596] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 15.596] (==) Automatically adding devices
    [ 15.596] (==) Automatically enabling devices
    [ 15.596] (==) Automatically adding GPU devices
    [ 15.773] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 15.773] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 15.773] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 15.779] (II) Loader magic: 0x818d80
    [ 15.780] (II) Module ABI versions:
    [ 15.780] X.Org ANSI C Emulation: 0.4
    [ 15.780] X.Org Video Driver: 18.0
    [ 15.780] X.Org XInput driver : 21.0
    [ 15.780] X.Org Server Extension : 8.0
    [ 15.782] (EE) systemd-logind: failed to get session: PID 299 does not belong to any known session
    [ 15.782] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 15.782] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 15.784] (--) PCI:*(0:0:2:0) 8086:0166:144d:c711 rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
    [ 15.784] (--) PCI: (0:1:0:0) 10de:1140:144d:c711 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
    [ 15.784] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 15.790] (II) LoadModule: "glx"
    [ 15.894] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 18.276] (II) Module glx: vendor="NVIDIA Corporation"
    [ 18.276] compiled for 4.0.2, module version = 1.0.0
    [ 18.276] Module class: X.Org Server Extension
    [ 18.290] (II) NVIDIA GLX Module 340.32 Tue Aug 5 20:32:43 PDT 2014
    [ 18.297] (II) Applying OutputClass "nvidia" to /dev/dri/card1
    [ 18.297] loading driver: nvidia
    [ 18.297] (==) Matched intel as autoconfigured driver 0
    [ 18.297] (==) Matched nvidia as autoconfigured driver 1
    [ 18.297] (==) Matched nouveau as autoconfigured driver 2
    [ 18.297] (==) Matched nvidia as autoconfigured driver 3
    [ 18.297] (==) Matched nv as autoconfigured driver 4
    [ 18.297] (==) Matched intel as autoconfigured driver 5
    [ 18.297] (==) Matched modesetting as autoconfigured driver 6
    [ 18.297] (==) Matched fbdev as autoconfigured driver 7
    [ 18.297] (==) Matched vesa as autoconfigured driver 8
    [ 18.297] (==) Assigned the driver to the xf86ConfigLayout
    [ 18.297] (II) LoadModule: "intel"
    [ 18.394] (WW) Warning, couldn't open module intel
    [ 18.394] (II) UnloadModule: "intel"
    [ 18.394] (II) Unloading intel
    [ 18.394] (EE) Failed to load module "intel" (module does not exist, 0)
    [ 18.394] (II) LoadModule: "nvidia"
    [ 18.395] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 18.478] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 18.478] compiled for 4.0.2, module version = 1.0.0
    [ 18.478] Module class: X.Org Video Driver
    [ 18.479] (II) LoadModule: "nouveau"
    [ 18.480] (WW) Warning, couldn't open module nouveau
    [ 18.480] (II) UnloadModule: "nouveau"
    [ 18.480] (II) Unloading nouveau
    [ 18.480] (EE) Failed to load module "nouveau" (module does not exist, 0)
    [ 18.480] (II) LoadModule: "nv"
    [ 18.480] (II) Loading /usr/lib/xorg/modules/drivers/nv_drv.so
    [ 18.487] (II) Module nv: vendor="X.Org Foundation"
    [ 18.487] compiled for 1.16.0, module version = 2.1.20
    [ 18.487] Module class: X.Org Video Driver
    [ 18.487] ABI class: X.Org Video Driver, version 18.0
    [ 18.487] (II) LoadModule: "modesetting"
    [ 18.488] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
    [ 18.501] (II) Module modesetting: vendor="X.Org Foundation"
    [ 18.501] compiled for 1.16.0, module version = 0.9.0
    [ 18.501] Module class: X.Org Video Driver
    [ 18.501] ABI class: X.Org Video Driver, version 18.0
    [ 18.501] (II) LoadModule: "fbdev"
    [ 18.501] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
    [ 18.509] (II) Module fbdev: vendor="X.Org Foundation"
    [ 18.509] compiled for 1.16.0, module version = 0.4.4
    [ 18.509] Module class: X.Org Video Driver
    [ 18.509] ABI class: X.Org Video Driver, version 18.0
    [ 18.509] (II) LoadModule: "vesa"
    [ 18.509] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [ 18.522] (II) Module vesa: vendor="X.Org Foundation"
    [ 18.522] compiled for 1.16.0, module version = 2.3.2
    [ 18.522] Module class: X.Org Video Driver
    [ 18.522] ABI class: X.Org Video Driver, version 18.0
    [ 18.522] (II) NVIDIA dlloader X Driver 340.32 Tue Aug 5 20:13:04 PDT 2014
    [ 18.522] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 18.534] (II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
    Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
    Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
    GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
    GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
    Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
    GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
    GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
    GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
    GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
    GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
    GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
    Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
    GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
    GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
    GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
    Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
    GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
    Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
    GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
    GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
    GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
    GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
    GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
    GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
    Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
    GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
    GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
    GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
    GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
    GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
    Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
    GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
    GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
    GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
    GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
    Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
    GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
    GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
    GeForce Go 6600, GeForce Go 6600 GT, Quadro NVS 440, Quadro FX 550,
    Quadro FX 550, Quadro FX 540, GeForce 6200, GeForce 6500,
    GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
    GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
    GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 7100 GS,
    GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT,
    GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
    GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
    GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7350 LE,
    GeForce 7300 LE, GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300,
    GeForce Go 7400, GeForce Go 7400 GS, Quadro NVS 110M,
    Quadro NVS 120M, Quadro FX 350M, GeForce 7500 LE, Quadro FX 350,
    GeForce 7300 GS, GeForce 7650 GS, GeForce 7600 GT, GeForce 7600 GS,
    GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT, GeForce Go 7700,
    GeForce Go 7600, GeForce Go 7600 GT, Quadro NVS 300M,
    GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560, GeForce 7900 GTX,
    GeForce 7900 GT, GeForce 7900 GS, GeForce 7950 GX2, GeForce 7950 GX2,
    GeForce 7950 GT, GeForce Go 7950 GTX, GeForce Go 7900 GS,
    GeForce Go 7900 GTX, Quadro FX 2500M, Quadro FX 1500M,
    Quadro FX 5500, Quadro FX 3500, Quadro FX 1500, Quadro FX 4500 X2,
    GeForce 6150, GeForce 6150 LE, GeForce 6100, GeForce Go 6150,
    Quadro NVS 210S / NVIDIA GeForce 6150LE, GeForce Go 6100,
    GeForce 6150SE, GeForce 6100 nForce 405, GeForce 6100 nForce 400,
    GeForce 6100 nForce 420, GeForce 7150M / nForce 630M,
    GeForce 7000M / nForce 610M, GeForce 7050 PV / nForce 630a,
    GeForce 7050 PV / nForce 630a, GeForce 7025 / nForce 630a,
    GeForce 8800 GTX, GeForce 8800 GTS, GeForce 8800 Ultra,
    Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS, GeForce 8600 GT,
    GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS, GeForce 9500M GS,
    GeForce 8300 GS, GeForce 8600M GT, GeForce 9650M GS,
    GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M,
    Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce GT 330,
    GeForce 8400 SE, GeForce 8500 GT, GeForce 8400 GS, GeForce 8300 GS,
    GeForce 8400 GS, GeForce 8600M GS, GeForce 8400M GT,
    GeForce 8400M GS, GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M,
    Quadro NVS 135M, GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G,
    Quadro NVS 290, GeForce GTX 295, GeForce GTX 280, GeForce GTX 260,
    GeForce GTX 285, GeForce GTX 275, GeForce GTX 260, GeForce GTX 295,
    Quadroplex 2200 D2, Quadroplex 2200 S4, Quadro CX, Quadro FX 5800,
    Quadro FX 4800, Quadro FX 3800, GeForce 8800 GTS 512,
    GeForce 9800 GT, GeForce 8800 GT, GeForce GT 230, GeForce 9800 GX2,
    GeForce 9800 GT, GeForce 8800 GS, GeForce GTS 240, GeForce 9800M GTX,
    GeForce 8800M GTS, GeForce GTX 280M, GeForce 9800M GT,
    GeForce 8800M GTX, GeForce 8800 GS, GeForce GTX 285M,
    GeForce 9600 GSO, GeForce 8800 GT, GeForce 9800 GTX/9800 GTX+,
    GeForce 9800 GTX+, GeForce 9800 GT, GeForce GTS 250,
    GeForce 9800M GTX, GeForce GTX 260M, Quadro FX 4700 X2,
    Quadro FX 3700, Quadro VX 200, Quadro FX 3600M, Quadro FX 2800M,
    Quadro FX 3700M, Quadro FX 3800M, GeForce 9600 GT, GeForce 9600 GS,
    GeForce 9600 GSO 512, GeForce GT 130, GeForce GT 140,
    GeForce 9800M GTS, GeForce 9700M GTS, GeForce 9800M GS,
    GeForce 9800M GTS, GeForce 9600 GT, GeForce 9600 GT,
    GeForce GTS 160M, GeForce GTS 150M, GeForce 9600 GSO,
    GeForce 9600 GT, Quadro FX 1800, Quadro FX 2700M, GeForce 9500 GT,
    GeForce 9400 GT, GeForce 9500 GT, GeForce 9500 GS, GeForce 9500 GS,
    GeForce GT 120, GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT,
    GeForce 9700M GT, GeForce 9500M G, GeForce 9650M GT, GeForce G 110M,
    GeForce GT 130M, GeForce GT 120M, GeForce GT 220M, GeForce 9650 S,
    Quadro FX 380, Quadro FX 580, Quadro FX 1700M, GeForce 9400 GT,
    Quadro FX 770M, GeForce 9300 GE, GeForce 9300 GS, GeForce 8400,
    GeForce 8400 SE, GeForce 8400 GS, GeForce 9300M GS, GeForce G100,
    GeForce 9300 SE, GeForce 9200M GS, GeForce 9300M GS, Quadro NVS 150M,
    Quadro NVS 160M, GeForce G 105M, GeForce G 103M, GeForce G105M,
    Quadro NVS 420, Quadro FX 370 LP, Quadro NVS 450, Quadro FX 370M,
    Quadro NVS 295, GeForce 9100M G, GeForce 8200M G, GeForce 9200,
    GeForce 9100, GeForce 8300, GeForce 8200, nForce 730a, GeForce 9200,
    nForce 980a/780a SLI, nForce 750a SLI, GeForce 8100 / nForce 720a,
    GeForce 9400, GeForce 9400, GeForce 9400M G, GeForce 9400M,
    GeForce 9300, ION, GeForce 9400M G, GeForce 9400, nForce 760i SLI,
    GeForce 9400, GeForce 9300 / nForce 730i, GeForce 9200,
    GeForce 9100M G, GeForce 8200M G, GeForce 9400M, GeForce 9200,
    GeForce G102M, GeForce G102M, ION, ION, GeForce 9400, ION, ION LE,
    ION LE, GeForce GT 220, GeForce 315, GeForce 210, GeForce GT 230M,
    GeForce GT 330M, GeForce GT 230M, GeForce GT 330M, NVS 5100M,
    GeForce GT 320M, GeForce GT 240M, GeForce GT 325M, Quadro FX 880M,
    GeForce G210, GeForce 205, GeForce 310, ION, GeForce 210,
    GeForce 310, GeForce 315, GeForce G105M, GeForce G105M, NVS 2100M,
    NVS 3100M, GeForce 305M, ION, GeForce 310M, GeForce 305M,
    GeForce 310M, GeForce 305M, GeForce G210M, GeForce 310M,
    Quadro FX 380 LP, Quadro FX 380M, GeForce GT 330, GeForce GT 320,
    GeForce GT 240, GeForce GT 340, GeForce GT 330, GeForce GTS 260M,
    GeForce GTS 250M, GeForce 315, GeForce GT 335M, GeForce GTS 350M,
    GeForce GTS 360M, Quadro FX 1800M
    [ 18.539] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
    [ 18.539] (II) FBDEV: driver for framebuffer: fbdev
    [ 18.539] (II) VESA: driver for VESA chipsets: vesa
    [ 18.539] (++) using VT number 1
    [ 18.539] (II) modesetting(0): using drv /dev/dri/card0
    [ 18.539] (WW) Falling back to old probe method for fbdev
    [ 18.539] (II) Loading sub module "fbdevhw"
    [ 18.539] (II) LoadModule: "fbdevhw"
    [ 18.540] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
    [ 18.547] (II) Module fbdevhw: vendor="X.Org Foundation"
    [ 18.547] compiled for 1.16.0, module version = 0.0.2
    [ 18.547] ABI class: X.Org Video Driver, version 18.0
    [ 18.547] (WW) Falling back to old probe method for vesa
    [ 18.547] (II) modesetting(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 18.547] (==) modesetting(0): Depth 24, (==) framebuffer bpp 32
    [ 18.547] (==) modesetting(0): RGB weight 888
    [ 18.547] (==) modesetting(0): Default visual is TrueColor
    [ 18.547] (II) modesetting(0): ShadowFB: preferred YES, enabled YES
    [ 18.547] (II) modesetting(0): Output LVDS-0 has no monitor section
    [ 18.548] (II) modesetting(0): Output VGA-0 has no monitor section
    [ 18.549] (II) modesetting(0): Output HDMI-0 has no monitor section
    [ 18.549] (II) modesetting(0): Output DisplayPort-0 has no monitor section
    [ 18.549] (II) modesetting(0): EDID for output LVDS-0
    [ 18.549] (II) modesetting(0): Manufacturer: AUO Model: 46ec Serial#: 0
    [ 18.549] (II) modesetting(0): Year: 2011 Week: 15
    [ 18.549] (II) modesetting(0): EDID Version: 1.4
    [ 18.549] (II) modesetting(0): Digital Display Input
    [ 18.549] (II) modesetting(0): 6 bits per channel
    [ 18.549] (II) modesetting(0): Digital interface is undefined
    [ 18.549] (II) modesetting(0): Max Image Size [cm]: horiz.: 34 vert.: 19
    [ 18.549] (II) modesetting(0): Gamma: 2.20
    [ 18.549] (II) modesetting(0): No DPMS capabilities specified
    [ 18.549] (II) modesetting(0): Supported color encodings: RGB 4:4:4
    [ 18.549] (II) modesetting(0): First detailed timing is preferred mode
    [ 18.549] (II) modesetting(0): Preferred mode is native pixel format and refresh rate
    [ 18.549] (II) modesetting(0): redX: 0.590 redY: 0.340 greenX: 0.330 greenY: 0.550
    [ 18.549] (II) modesetting(0): blueX: 0.150 blueY: 0.140 whiteX: 0.313 whiteY: 0.329
    [ 18.549] (II) modesetting(0): Manufacturer's mask: 0
    [ 18.549] (II) modesetting(0): Supported detailed timing:
    [ 18.549] (II) modesetting(0): clock: 70.7 MHz Image Size: 344 x 193 mm
    [ 18.549] (II) modesetting(0): h_active: 1366 h_sync: 1374 h_sync_end 1384 h_blank_end 1492 h_border: 0
    [ 18.549] (II) modesetting(0): v_active: 768 v_sync: 771 v_sync_end 772 v_blanking: 790 v_border: 0
    [ 18.549] (II) modesetting(0): Unknown vendor-specific block f
    [ 18.549] (II) modesetting(0): AUO
    [ 18.549] (II) modesetting(0): B156XW04 V6
    [ 18.549] (II) modesetting(0): EDID (in hex):
    [ 18.549] (II) modesetting(0): 00ffffffffffff0006afec4600000000
    [ 18.549] (II) modesetting(0): 0f15010490221378020bb59757548c26
    [ 18.549] (II) modesetting(0): 23505400000001010101010101010101
    [ 18.549] (II) modesetting(0): 0101010101019e1b567e50001630080a
    [ 18.549] (II) modesetting(0): 310058c1100000180000000f00000000
    [ 18.549] (II) modesetting(0): 00000000000000000020000000fe0041
    [ 18.549] (II) modesetting(0): 554f0a202020202020202020000000fe
    [ 18.549] (II) modesetting(0): 004231353658573034205636200a0084
    [ 18.549] (II) modesetting(0): Printing probed modes for output LVDS-0
    [ 18.549] (II) modesetting(0): Modeline "1366x768"x60.0 70.70 1366 1374 1384 1492 768 771 772 790 -hsync -vsync (47.4 kHz eP)
    [ 18.549] (II) modesetting(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
    [ 18.549] (II) modesetting(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
    [ 18.549] (II) modesetting(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
    [ 18.549] (II) modesetting(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
    [ 18.549] (II) modesetting(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
    [ 18.549] (II) modesetting(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
    [ 18.549] (II) modesetting(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
    [ 18.549] (II) modesetting(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
    [ 18.550] (II) modesetting(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
    [ 18.550] (II) modesetting(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
    [ 18.550] (II) modesetting(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
    [ 18.550] (II) modesetting(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
    [ 18.550] (II) modesetting(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
    [ 18.550] (II) modesetting(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
    [ 18.550] (II) modesetting(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
    [ 18.550] (II) modesetting(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
    [ 18.551] (II) modesetting(0): EDID for output VGA-0
    [ 18.551] (II) modesetting(0): EDID for output HDMI-0
    [ 18.551] (II) modesetting(0): EDID for output DisplayPort-0
    [ 18.551] (II) modesetting(0): Output LVDS-0 connected
    [ 18.551] (II) modesetting(0): Output VGA-0 disconnected
    [ 18.551] (II) modesetting(0): Output HDMI-0 disconnected
    [ 18.551] (II) modesetting(0): Output DisplayPort-0 disconnected
    [ 18.551] (II) modesetting(0): Using exact sizes for initial modes
    [ 18.551] (II) modesetting(0): Output LVDS-0 using initial mode 1366x768
    [ 18.551] (II) modesetting(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 18.551] (==) modesetting(0): DPI set to (96, 96)
    [ 18.551] (II) Loading sub module "fb"
    [ 18.551] (II) LoadModule: "fb"
    [ 18.551] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 18.560] (II) Module fb: vendor="X.Org Foundation"
    [ 18.560] compiled for 1.16.0, module version = 1.0.0
    [ 18.560] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 18.560] (II) Loading sub module "shadow"
    [ 18.560] (II) LoadModule: "shadow"
    [ 18.560] (II) Loading /usr/lib/xorg/modules/libshadow.so
    [ 18.563] (II) Module shadow: vendor="X.Org Foundation"
    [ 18.563] compiled for 1.16.0, module version = 1.1.0
    [ 18.563] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 18.564] (II) UnloadModule: "nvidia"
    [ 18.564] (II) Unloading nvidia
    [ 18.564] (II) UnloadModule: "nv"
    [ 18.564] (II) Unloading nv
    [ 18.564] (II) UnloadModule: "fbdev"
    [ 18.564] (II) Unloading fbdev
    [ 18.564] (II) UnloadSubModule: "fbdevhw"
    [ 18.564] (II) Unloading fbdevhw
    [ 18.564] (II) UnloadModule: "vesa"
    [ 18.564] (II) Unloading vesa
    [ 18.564] (==) Depth 24 pixmap format is 32 bpp
    [ 18.592] (==) modesetting(0): Backing store enabled
    [ 18.592] (==) modesetting(0): Silken mouse enabled
    [ 18.592] (II) modesetting(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 18.593] (==) modesetting(0): DPMS enabled
    [ 18.610] (--) RandR disabled
    [ 18.694] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
    [ 18.694] (II) modesetting(0): Damage tracking initialized
    [ 18.694] (II) modesetting(0): Setting screen physical size to 361 x 203
    [ 19.222] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 19.222] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 19.222] (II) LoadModule: "evdev"
    [ 19.223] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 19.252] (II) Module evdev: vendor="X.Org Foundation"
    [ 19.252] compiled for 1.16.0, module version = 2.9.0
    [ 19.252] Module class: X.Org XInput Driver
    [ 19.252] ABI class: X.Org XInput driver, version 21.0
    [ 19.252] (II) Using input driver 'evdev' for 'Power Button'
    [ 19.252] (**) Power Button: always reports core events
    [ 19.252] (**) evdev: Power Button: Device: "/dev/input/event3"
    [ 19.252] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 19.252] (--) evdev: Power Button: Found keys
    [ 19.252] (II) evdev: Power Button: Configuring as keyboard
    [ 19.252] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
    [ 19.252] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 19.252] (**) Option "xkb_rules" "evdev"
    [ 19.252] (**) Option "xkb_model" "pc104"
    [ 19.252] (**) Option "xkb_layout" "us"
    [ 19.283] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
    [ 19.283] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 19.283] (II) Using input driver 'evdev' for 'Video Bus'
    [ 19.283] (**) Video Bus: always reports core events
    [ 19.283] (**) evdev: Video Bus: Device: "/dev/input/event6"
    [ 19.283] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 19.283] (--) evdev: Video Bus: Found keys
    [ 19.283] (II) evdev: Video Bus: Configuring as keyboard
    [ 19.283] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8/event6"
    [ 19.283] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 19.283] (**) Option "xkb_rules" "evdev"
    [ 19.283] (**) Option "xkb_model" "pc104"
    [ 19.283] (**) Option "xkb_layout" "us"
    [ 19.284] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
    [ 19.284] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 19.284] (II) Using input driver 'evdev' for 'Video Bus'
    [ 19.284] (**) Video Bus: always reports core events
    [ 19.284] (**) evdev: Video Bus: Device: "/dev/input/event5"
    [ 19.284] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 19.284] (--) evdev: Video Bus: Found keys
    [ 19.284] (II) evdev: Video Bus: Configuring as keyboard
    [ 19.284] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0d/LNXVIDEO:00/input/input7/event5"
    [ 19.284] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
    [ 19.284] (**) Option "xkb_rules" "evdev"
    [ 19.284] (**) Option "xkb_model" "pc104"
    [ 19.284] (**) Option "xkb_layout" "us"
    [ 19.284] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 19.284] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 19.284] (II) Using input driver 'evdev' for 'Power Button'
    [ 19.284] (**) Power Button: always reports core events
    [ 19.284] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 19.284] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 19.284] (--) evdev: Power Button: Found keys
    [ 19.284] (II) evdev: Power Button: Configuring as keyboard
    [ 19.285] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2"
    [ 19.285] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
    [ 19.285] (**) Option "xkb_rules" "evdev"
    [ 19.285] (**) Option "xkb_model" "pc104"
    [ 19.285] (**) Option "xkb_layout" "us"
    [ 19.285] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [ 19.285] (II) No input driver specified, ignoring this device.
    [ 19.285] (II) This device may have been added with another device file.
    [ 19.286] (II) config/udev: Adding input device Webcam SC-10HDD12636P (/dev/input/event11)
    [ 19.286] (**) Webcam SC-10HDD12636P: Applying InputClass "evdev keyboard catchall"
    [ 19.286] (II) Using input driver 'evdev' for 'Webcam SC-10HDD12636P'
    [ 19.286] (**) Webcam SC-10HDD12636P: always reports core events
    [ 19.286] (**) evdev: Webcam SC-10HDD12636P: Device: "/dev/input/event11"
    [ 19.286] (--) evdev: Webcam SC-10HDD12636P: Vendor 0xc45 Product 0x64e0
    [ 19.286] (--) evdev: Webcam SC-10HDD12636P: Found keys
    [ 19.286] (II) evdev: Webcam SC-10HDD12636P: Configuring as keyboard
    [ 19.286] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input12/event11"
    [ 19.286] (II) XINPUT: Adding extended input device "Webcam SC-10HDD12636P" (type: KEYBOARD, id 10)
    [ 19.286] (**) Option "xkb_rules" "evdev"
    [ 19.286] (**) Option "xkb_model" "pc104"
    [ 19.286] (**) Option "xkb_layout" "us"
    [ 19.287] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event9)
    [ 19.287] (II) No input driver specified, ignoring this device.
    [ 19.287] (II) This device may have been added with another device file.
    [ 19.287] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
    [ 19.287] (II) No input driver specified, ignoring this device.
    [ 19.287] (II) This device may have been added with another device file.
    [ 19.287] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event8)
    [ 19.287] (II) No input driver specified, ignoring this device.
    [ 19.287] (II) This device may have been added with another device file.
    [ 19.287] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 19.287] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 19.287] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 19.287] (**) AT Translated Set 2 keyboard: always reports core events
    [ 19.288] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 19.288] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 19.288] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 19.288] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 19.288] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 19.288] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
    [ 19.288] (**) Option "xkb_rules" "evdev"
    [ 19.288] (**) Option "xkb_model" "pc104"
    [ 19.288] (**) Option "xkb_layout" "us"
    [ 19.288] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
    [ 19.288] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 19.288] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 19.288] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
    [ 19.288] (II) LoadModule: "synaptics"
    [ 19.289] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 19.303] (II) Module synaptics: vendor="X.Org Foundation"
    [ 19.303] compiled for 1.16.0, module version = 1.8.0
    [ 19.303] Module class: X.Org XInput Driver
    [ 19.303] ABI class: X.Org XInput driver, version 21.0
    [ 19.303] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    [ 19.303] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 19.303] (**) Option "Device" "/dev/input/event7"
    [ 19.413] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
    [ 19.413] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1210 - 5738 (res 48)
    [ 19.413] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 986 - 4886 (res 80)
    [ 19.413] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 19.413] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
    [ 19.413] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
    [ 19.413] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 19.413] (**) Option "TapButton1" "1"
    [ 19.413] (**) Option "TapButton2" "2"
    [ 19.413] (**) Option "TapButton3" "3"
    [ 19.413] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 19.414] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 19.466] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event7"
    [ 19.466] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
    [ 19.467] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    [ 19.467] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
    [ 19.467] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.033
    [ 19.467] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 19.467] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    [ 19.467] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 19.467] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 19.467] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 19.468] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
    [ 19.468] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
    [ 19.468] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
    [ 19.468] (II) No input driver specified, ignoring this device.
    [ 19.468] (II) This device may have been added with another device file.
    [ 32.387] (II) modesetting(0): EDID vendor "AUO", prod id 18156
    [ 32.387] (II) modesetting(0): Printing DDC gathered Modelines:
    [ 32.387] (II) modesetting(0): Modeline "1366x768"x0.0 70.70 1366 1374 1384 1492 768 771 772 790 -hsync -vsync (47.4 kHz eP)
    Along with the Xorg.conf
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 340.32 (buildmeister@swio-display-x64-rhel04-01) Tue Aug 5 21:15:33 PDT 2014
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "Unknown"
    HorizSync 28.0 - 33.0
    VertRefresh 43.0 - 72.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Last edited by Gilnaa (2014-08-23 12:26:16)

  • 3d Acceleration on two monitors with nvidia?

    Is there any way to get two monitors that are running on the same pc and kernel BOTH be 3d accelerated in X?
    Like two instances of X or two instances of the WM...or...something?  I have an nvidia card for both of my monitors and would like both accelerated...
    Is this possible?  Can I use the "nvidia" (as opposed to "nv") driver for both?
    I'm unclear on this issue, any help would be appreciated.

    I finally had a chance to do some more exploration.
    Currently, I've got two fluxboxes running across my monitors (no xinerama right now).  The only thing I don't like is that I still can't get the "nvidia" driver to work for both displays.
    Strangely enough, when I try to use the "nvidia" module for both, upon "startx" both monitors go black and ctl + alt + backspace won't kill X, I have to hit the reset button.
    Here is the log generated after both monitors going blank.  Any help would be very appreciated:
    <----------I editted a few lines out here and there in the log, due to the forums truncating the message.  I editted in particular the long series of line starting with NV or NVIDIA and then a bunch of resolutionm combos.  let me know if there is something particular you want me to post. ---------->
    (II) LoadModule: "dbe"
    (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 6.8.1, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.2
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "extmod"
    (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 6.8.1, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.2
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "type1"
    (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
    (II) Module type1: vendor="X.Org Foundation"
    compiled for 6.8.1, module version = 1.0.2
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.4
    (II) Loading font Type1
    (II) Loading font CID
    (II) LoadModule: "speedo"
    (WW) Warning, couldn't open module speedo
    (II) UnloadModule: "speedo"
    (EE) Failed to load module "speedo" (module does not exist, 0)
    (II) LoadModule: "freetype"
    (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 6.8.1, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.4
    (II) Loading font FreeType
    (II) LoadModule: "nvidia"
    (II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o
    (II) Module nvidia: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.6106
    Module class: XFree86 Video Driver
    (II) LoadModule: "nv"
    (II) Loading /usr/X11R6/lib/modules/drivers/nv_drv.o
    (II) Module nv: vendor="X.Org Foundation"
    compiled for 6.8.1, module version = 1.0.1
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 0.7
    (II) LoadModule: "mouse"
    (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
    (II) Module mouse: vendor="X.Org Foundation"
    compiled for 6.8.1, module version = 1.0.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 0.4
    (II) LoadModule: "keyboard"
    (II) Loading /usr/X11R6/lib/modules/input/keyboard_drv.o
    (II) Module keyboard: vendor="X.Org Foundation"
    compiled for 6.8.1, module version = 1.0.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 0.4
    (II) NVIDIA X Driver 1.0-6106 Wed Jun 23 08:14:45 PDT 2004
    (II) NVIDIA Unified Driver for all NVIDIA GPUs
    (II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
    Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
    Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
    GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
    GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
    Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
    GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
    GeForce4 420 Go 32M, GeForce4 460 Go, GeForce4 440 Go 64M,
    GeForce4 410 Go 16M, Quadro4 500 GoGL, Quadro4 550 XGL, Quadro4 NVS,
    GeForce4 MX 440 with AGP8X, GeForce4 MX 440SE with AGP8X,
    GeForce4 MX 420 with AGP8X, GeForce4 448 Go, GeForce4 488 Go,
    Quadro4 580 XGL, Quadro4 280 NVS, Quadro4 380 XGL,
    GeForce4 MX Integrated GPU, GeForce3, GeForce3 Ti 200,
    GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600, GeForce4 Ti 4400,
    0x0252, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
    Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
    GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
    Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
    GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
    GeForce FX 5600 Ultra, GeForce FX 5600, 0x0313, GeForce FX 5600SE,
    0x0316, 0x0317, GeForce FX Go5600, GeForce FX Go5650,
    Quadro FX Go700, 0x031D, 0x031E, 0x031F, GeForce FX 5200,
    GeForce FX 5200 Ultra, GeForce FX 5200, GeForce FX 5200SE,
    GeForce FX Go5200, GeForce FX Go5250, GeForce FX Go5200 32M/64M,
    0x0329, Quadro NVS 280 PCI, Quadro FX 500, GeForce FX Go5300,
    GeForce FX Go5100, 0x032F, GeForce FX 5900 Ultra, GeForce FX 5900,
    GeForce FX 5900XT, GeForce FX 5950 Ultra, 0x0334, Quadro FX 3000,
    GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
    GeForce FX 5700VE, 0x0345, GeForce FX Go5700, GeForce FX Go5700,
    0x0349, 0x034B, Quadro FX Go1000, Quadro FX 1100, 0x034F
    (II) Primary Device is: PCI 01:00:0
    (WW) NVIDIA: No matching Device section for instance (BusID PCI:2:4:0) found
    (--) Chipset NVIDIA GPU found
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1 0 0xfeaffc00 - 0xfeaffcff (0x100) MX[B]
    [6] -1 0 0xea7ff000 - 0xea7fffff (0x1000) MX[B]
    [7] -1 0 0x40000000 - 0x400003ff (0x400) MX[B]
    [8] -1 0 0xfebffc00 - 0xfebfffff (0x400) MX[B]
    [9] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
    [10] -1 0 0x48000000 - 0x4fffffff (0x8000000) MX[B](B)
    [11] -1 0 0xea7fe000 - 0xea7fefff (0x1000) MX[B](B)
    [12] -1 0 0xfc9e0000 - 0xfc9fffff (0x20000) MX[B](B)
    [13] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
    [14] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[B](B)
    [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    [17] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[B]
    [18] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]
    [19] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[B]
    [20] -1 0 0x0000b800 - 0x0000b81f (0x20) IX[B]
    [21] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B]
    [22] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[B]
    [23] -1 0 0x0000e000 - 0x0000e003 (0x4) IX[B]
    [24] -1 0 0x0000e400 - 0x0000e407 (0x8) IX[B]
    [25] -1 0 0x0000e800 - 0x0000e803 (0x4) IX[B]
    [26] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
    [27] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
    [28] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
    [29] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
    [30] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
    [31] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
    (--) Chipset GeForce2 MX/MX 400 found
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1 0 0xfeaffc00 - 0xfeaffcff (0x100) MX[B]
    [6] -1 0 0xea7ff000 - 0xea7fffff (0x1000) MX[B]
    [7] -1 0 0x40000000 - 0x400003ff (0x400) MX[B]
    [8] -1 0 0xfebffc00 - 0xfebfffff (0x400) MX[B]
    [9] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
    [10] -1 0 0x48000000 - 0x4fffffff (0x8000000) MX[B](B)
    [11] -1 0 0xea7fe000 - 0xea7fefff (0x1000) MX[B](B)
    [12] -1 0 0xfc9e0000 - 0xfc9fffff (0x20000) MX[B](B)
    [13] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
    [14] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[B](B)
    [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    [17] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[B]
    [18] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]
    [19] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[B]
    [20] -1 0 0x0000b800 - 0x0000b81f (0x20) IX[B]
    [21] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B]
    [22] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[B]
    [23] -1 0 0x0000e000 - 0x0000e003 (0x4) IX[B]
    [24] -1 0 0x0000e400 - 0x0000e407 (0x8) IX[B]
    [25] -1 0 0x0000e800 - 0x0000e803 (0x4) IX[B]
    [26] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
    [27] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
    [28] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
    [29] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
    [30] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
    [31] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
    (WW) ****INVALID MEM ALLOCATION**** b: 0xff000000 e: 0xffffffff correcting
    (II) NonSys
    [0] -1 0 0xfeaffc00 - 0xfeaffcff (0x100) MX[B]
    [1] -1 0 0xea7ff000 - 0xea7fffff (0x1000) MX[B]
    [2] -1 0 0x40000000 - 0x400003ff (0x400) MX[B]
    [3] -1 0 0xfebffc00 - 0xfebfffff (0x400) MX[B]
    [4] -1 0 0xf0000000 - 0xf0000000 (0x1) MX[B]
    [5] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [6] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [7] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [8] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [9] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [10] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[B]
    [11] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]
    [12] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[B]
    [13] -1 0 0x0000b800 - 0x0000b81f (0x20) IX[B]
    [14] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B]
    [15] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[B]
    [16] -1 0 0x0000e000 - 0x0000e003 (0x4) IX[B]
    [17] -1 0 0x0000e400 - 0x0000e407 (0x8) IX[B]
    [18] -1 0 0x0000e800 - 0x0000e803 (0x4) IX[B]
    [19] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
    [20] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
    [21] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
    [22] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
    [23] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
    [24] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
    [25] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
    [26] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
    [27] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
    [28] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
    [29] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [30] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    (WW) ****INVALID MEM ALLOCATION**** b: 0x48000000 e: 0x4fffffff correcting
    <----------EDIT---------->
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Reloading /usr/X11R6/lib/modules/libfb.a
    (II) Loading sub module "xaa"
    (II) LoadModule: "xaa"
    (II) Loading /usr/X11R6/lib/modules/libxaa.a
    (II) Module xaa: vendor="X.Org Foundation"
    compiled for 6.8.1, module version = 1.2.0
    ABI class: X.Org Video Driver, version 0.7
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Reloading /usr/X11R6/lib/modules/libramdac.a
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? Yes, I do.
    (II) LoadModule: "rac"
    (II) Loading /usr/X11R6/lib/modules/librac.a
    (II) Module rac: vendor="X.Org Foundation"
    compiled for 6.8.1, module version = 1.0.0
    ABI class: X.Org Video Driver, version 0.7
    (II) resource ranges after preInit:
    [0] 1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
    [1] 1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B]
    [2] 0 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B]
    [3] 0 0 0xfb000000 - 0xfbffffff (0x1000000) MX[B]
    [4] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
    [5] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
    [6] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [7] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [8] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [9] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [10] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [11] -1 0 0xfeaffc00 - 0xfeaffcff (0x100) MX[B]
    [12] -1 0 0xea7ff000 - 0xea7fffff (0x1000) MX[B]
    [13] -1 0 0x40000000 - 0x400003ff (0x400) MX[B]
    [14] -1 0 0xfebffc00 - 0xfebfffff (0x400) MX[B]
    [15] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
    [16] -1 0 0xea7fe000 - 0xea7fefff (0x1000) MX[B](B)
    [17] -1 0 0xfc9e0000 - 0xfc9fffff (0x20000) MX[B](B)
    [18] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
    [19] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[B](B)
    [20] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
    [21] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
    [22] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
    [23] 1 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
    [24] 1 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
    [25] 1 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
    [26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [27] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    [28] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[B]
    [29] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]
    [30] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[B]
    [31] -1 0 0x0000b800 - 0x0000b81f (0x20) IX[B]
    [32] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B]
    [33] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[B]
    [34] -1 0 0x0000e000 - 0x0000e003 (0x4) IX[B]
    [35] -1 0 0x0000e400 - 0x0000e407 (0x8) IX[B]
    [36] -1 0 0x0000e800 - 0x0000e803 (0x4) IX[B]
    [37] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
    [38] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
    [39] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
    [40] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
    [41] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
    [42] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
    [43] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
    [44] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
    [45] 1 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
    [46] 1 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
    (II) NVIDIA(0): Setting mode "1280x960"
    (II) Loading extension NV-GLX
    (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
    (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
    (==) NVIDIA(0): Backing store disabled
    (==) NVIDIA(0): Silken mouse enabled
    (II) Loading extension NV-CONTROL
    (EE) NVIDIA(0): Failed to load GLX
    (==) RandR enabled
    (==) NV(1): Write-combining range (0xe0000000,0x4000000)
    (II) NV(1): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    8x8 mono pattern filled rectangles
    Indirect CPU to Screen color expansion
    Solid Lines
    Scanline Image Writes
    Offscreen Pixmaps
    Setting up tile and stipple cache:
    32 128x128 slots
    32 256x256 slots
    16 512x512 slots
    (==) NV(1): Backing store disabled
    (==) NV(1): Silken mouse enabled
    (WW) NV(1): Option "RenderAccel" is not used
    (==) RandR enabled
    (II) Entity 0 shares no resources
    (II) Entity 1 shares no resources
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension LBX
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension XFree86-Bigfont
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing built-in extension XEVIE
    (**) Option "Protocol" "IMPS/2"
    (**) Mouse1: Device: "/dev/psaux"
    (**) Mouse1: Protocol: "IMPS/2"
    (**) Option "CorePointer"
    (**) Mouse1: Core Pointer
    (**) Option "Device" "/dev/psaux"
    (**) Option "Emulate3Buttons"
    (**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
    (**) Option "ZAxisMapping" "4 5"
    (**) Mouse1: ZAxisMapping: buttons 4 and 5
    (**) Mouse1: Buttons: 5
    (**) Option "CoreKeyboard"
    (**) Keyboard1: Core Keyboard
    (**) Option "Protocol" "standard"
    (**) Keyboard1: Protocol: standard
    (**) Option "XkbRules" "xorg"
    (**) Keyboard1: XkbRules: "xorg"
    (**) Option "XkbModel" "pc101"
    (**) Keyboard1: XkbModel: "pc101"
    (**) Option "XkbLayout" "us"
    (**) Keyboard1: XkbLayout: "us"
    (**) Option "CustomKeycodes" "off"
    (**) Keyboard1: CustomKeycodes disabled
    (II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
    (II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
    (II) XINPUT: Adding extended input device "NVIDIA Event Handler" (type: Other)
    (II) Mouse1: ps2EnableDataReporting: succeeded
    Could not init font path element /usr/X11R6/lib/X11/fonts/local/, removing from list!
    GetModeLine - scrn: 0 clock: 148500
    GetModeLine - hdsp: 1280 hbeg: 1344 hend: 1504 httl: 1728
    vdsp: 960 vbeg: 961 vend: 964 vttl: 1011 flags: 5
    GetModeLine - scrn: 0 clock: 148500
    GetModeLine - hdsp: 1280 hbeg: 1344 hend: 1504 httl: 1728
    vdsp: 960 vbeg: 961 vend: 964 vttl: 1011 flags: 5
    GetModeLine - scrn: 0 clock: 148500
    GetModeLine - hdsp: 1280 hbeg: 1344 hend: 1504 httl: 1728
    vdsp: 960 vbeg: 961 vend: 964 vttl: 1011 flags: 5
    GetModeLine - scrn: 0 clock: 148500
    GetModeLine - hdsp: 1280 hbeg: 1344 hend: 1504 httl: 1728
    vdsp: 960 vbeg: 961 vend: 964 vttl: 1011 flags: 5
    GetModeLine - scrn: 0 clock: 148500
    GetModeLine - hdsp: 1280 hbeg: 1344 hend: 1504 httl: 1728
    vdsp: 960 vbeg: 961 vend: 964 vttl: 1011 flags: 5
    SwitchToMode - scrn: 0 clock: 74250
    hdsp: 640 hbeg: 672 hend: 752 httl: 864
    vdsp: 480 vbeg: 480 vend: 482 vttl: 505 flags: 37
    Checking against clock: 148500 (148500)
    hdsp: 1280 hbeg: 1344 hend: 1504 httl: 1728
    vdsp: 960 vbeg: 961 vend: 964 vttl: 1011 flags: 5
    Checking against clock: 94500 (94500)
    hdsp: 1024 hbeg: 1072 hend: 1168 httl: 1376
    vdsp: 768 vbeg: 769 vend: 772 vttl: 808 flags: 5
    Checking against clock: 56300 (56300)
    hdsp: 800 hbeg: 832 hend: 896 httl: 1048
    vdsp: 600 vbeg: 601 vend: 604 vttl: 631 flags: 5
    Checking against clock: 74250 (74250)
    hdsp: 640 hbeg: 672 hend: 752 httl: 864
    vdsp: 480 vbeg: 480 vend: 482 vttl: 505 flags: 37
    (II) Screen 0 shares mem & io resources
    (II) Screen 1 shares mem & io resources
    (II) NVIDIA(0): Setting mode "640x480"
    (II) Entity 0 shares no resources
    (II) Entity 1 shares no resources
    SwitchToMode - Succeeded
    GetModeLine - scrn: 0 clock: 74250
    GetModeLine - hdsp: 640 hbeg: 672 hend: 752 httl: 864
    vdsp: 480 vbeg: 480 vend: 482 vttl: 505 flags: 37
    GetModeLine - scrn: 0 clock: 74250
    GetModeLine - hdsp: 640 hbeg: 672 hend: 752 httl: 864
    vdsp: 480 vbeg: 480 vend: 482 vttl: 505 flags: 37
    SwitchToMode - scrn: 0 clock: 148500
    hdsp: 1280 hbeg: 1344 hend: 1504 httl: 1728
    vdsp: 960 vbeg: 961 vend: 964 vttl: 1011 flags: 5
    Checking against clock: 148500 (148500)
    hdsp: 1280 hbeg: 1344 hend: 1504 httl: 1728
    vdsp: 960 vbeg: 961 vend: 964 vttl: 1011 flags: 5
    (II) Screen 0 shares mem & io resources
    (II) Screen 1 shares mem & io resources
    (II) NVIDIA(0): Setting mode "1280x960"
    (II) Entity 0 shares no resources
    (II) Entity 1 shares no resources
    SwitchToMode - Succeeded
    (II) Screen 0 shares mem & io resources
    (II) Screen 1 shares mem & io resources
    (II) Screen 0 shares mem & io resources
    (II) Screen 1 shares mem & io resources
    FreeFontPath: FPE "/usr/X11R6/lib/X11/fonts/misc/" refcount is 2, should be 1; fixing.

  • Bring back the W700 series!!!

    I am a very happy owner of the Lenovo W701ds workstation laptop. So happy that it pains me that I should not be able to upgrade my machine with any similar model by Lenovo in the future. I need the large, at least 17 in screen and I need to be able to drive another 2560x1600 external monitor. I understand that Lenovo discontinued the W7** series for good. Does anybody know of any petition or any way to plead with Lenovo to reconsider?

    I fear that won't happen. The 17" Thinkpads were an ambitious project form Lenovo, but it appears that sales didn't met expectations, and could no longer justify further uphold of the series. The total number of power users who need that kind of extensive storage options and graphics power is obviously too small. The fact that especially the W701 is almost immediately sold out when (rarely) showing up in Lenovo Outlet or eBay, does obviously not reflect general demand.
    I'm personally very satisfied with my W700 and W701 and hope they will last for a along time. I wouldn't neglect a decent refresh though: Ivy Bridge, mSATA, a premium display and maybe more flexible video options (Geforce and Quadro) would be just great.
    ThinkPad W700, W701, T40p, T420, X200S, TPT2, Twist, ThinkStation D20, ThinkCentre M90z, M92p, M93p

  • Xorg doesn't start some "FRAMEBUFFER" problem

    I would like to ask you to help me. After two days I'm down. I've read some topics and hints but somehow maybe because I'm so nervous now I cannot concentrate. ( like try setting vesafb - video=vesafb but where?:oops: Every time I try to start X I get this message:
    "Cannot run in framebuffer mode. Please specify bus IDs for all framebuffer devices."
    and then some
    "fatal IO error 104(connection reset by peer)on X server "0.0" "
    I'm using Xorg 6.8.2.0., Nvidia driver{pacman -sy nvidia},
    kernel26 2.6.12.2-1. :oops:
    Please help.
      :cry:

    As has been requested before here are the files - first Xorg.0.log
    X Window System Version 6.8.2
    Release Date: 9 February 2005
    X Protocol Version 11, Revision 0, Release 6.8.2
    Build Operating System: Linux 2.6.10-ARCH i686 [ELF]
    Current Operating System: Linux myhost 2.6.12-ARCH #1 SMP Fri Jul 1 11:55:48 PDT 2005 i686
    Build Date: 16 February 2005
        Before reporting problems, check http://wiki.X.Org
        to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Fri Sep 16 08:32:49 2005
    (EE) Unable to locate/open config file
    (II) Module ABI versions:
        X.Org ANSI C Emulation: 0.2
        X.Org Video Driver: 0.7
        X.Org XInput driver : 0.4
        X.Org Server Extension : 0.2
        X.Org Font Renderer : 0.4
    (II) Loader running on linux
    (II) LoadModule: "bitmap"
    (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
    (II) Module bitmap: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.0
        Module class: X.Org Font Renderer
        ABI class: X.Org Font Renderer, version 0.4
    (II) Loading font Bitmap
    (II) LoadModule: "pcidata"
    (II) Loading /usr/X11R6/lib/modules/libpcidata.a
    (II) Module pcidata: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.0
        ABI class: X.Org Video Driver, version 0.7
    (++) using VT number 7
    (II) PCI: PCI scan (all values are in hex)
    (II) PCI: 00:00:0: chip 1106,3189 card 1458,5000 rev 00 class 06,00,00 hdr 00
    (II) PCI: 00:01:0: chip 1106,b168 card 0000,0000 rev 00 class 06,04,00 hdr 01
    (II) PCI: 00:0a:0: chip 1033,00e7 card 1033,00ce rev 01 class 0c,00,10 hdr 00
    (II) PCI: 00:0b:0: chip 3388,0021 card 0000,0000 rev 13 class 06,04,00 hdr 01
    (II) PCI: 00:0f:0: chip 105a,5275 card 1458,b001 rev 01 class 01,04,85 hdr 00
    (II) PCI: 00:10:0: chip 1106,3038 card 1458,5004 rev 80 class 0c,03,00 hdr 80
    (II) PCI: 00:10:1: chip 1106,3038 card 1458,5004 rev 80 class 0c,03,00 hdr 80
    (II) PCI: 00:10:2: chip 1106,3038 card 1458,5004 rev 80 class 0c,03,00 hdr 80
    (II) PCI: 00:10:3: chip 1106,3104 card 1458,5004 rev 82 class 0c,03,20 hdr 00
    (II) PCI: 00:11:0: chip 1106,3177 card 1458,5001 rev 00 class 06,01,00 hdr 80
    (II) PCI: 00:11:1: chip 1106,0571 card 1458,5002 rev 06 class 01,01,8a hdr 00
    (II) PCI: 00:13:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00
    (II) PCI: 01:00:0: chip 10de,00f3 card 1462,9883 rev a2 class 03,00,00 hdr 00
    (II) PCI: 02:08:0: chip 1013,6003 card 1681,a012 rev 01 class 04,01,00 hdr 00
    (II) PCI: 02:09:0: chip 11c1,5811 card 1681,a012 rev 04 class 0c,00,10 hdr 00
    (II) PCI: End of PCI scan
    (II) Host-to-PCI bridge:
    (II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 0 I/O range:
        [0] -1    0    0x00000000 - 0x0000ffff (0x10000) IX
    (II) Bus 0 non-prefetchable memory range:
        [0] -1    0    0x00000000 - 0xffffffff (0x0) MX[B]
    (II) Bus 0 prefetchable memory range:
        [0] -1    0    0x00000000 - 0xffffffff (0x0) MX[B]
    (II) PCI-to-PCI bridge:
    (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
    (II) Bus 1 non-prefetchable memory range:
        [0] -1    0    0xe8000000 - 0xeaffffff (0x3000000) MX[B]
    (II) Bus 1 prefetchable memory range:
        [0] -1    0    0xd0000000 - 0xdfffffff (0x10000000) MX[B]
    (II) PCI-to-PCI bridge:
    (II) Bus 2: bridge is at (0:11:0), (0,2,2), BCTRL: 0x0006 (VGA_EN is cleared)
    (II) Bus 2 non-prefetchable memory range:
        [0] -1    0    0xeb000000 - 0xeb1fffff (0x200000) MX[B]
    (II) PCI-to-ISA bridge:
    (II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
    (--) PCI:*(1:0:0) nVidia Corporation unknown chipset (0x00f3) rev 162, Mem @ 0xe8000000/24, 0xd0000000/28, 0xe9000000/24
    xf86AutoConfig: Primary PCI is 1:0:0
    Running "/usr/X11R6/bin/getconfig -X 60802000 -I /etc/X11,/usr/X11R6/etc/X11,/usr/X11R6/lib/modules,/usr/X11R6/lib/X11/getconfig -v 0x10de -d 0x00f3 -r 0xa2 -s 0x1462 -b 0x9883 -c 0x0300"
    New driver is "nv"
    (==) Using default built-in configuration (53 lines)
    (==) --- Start of built-in configuration ---
        Section "Module"
            Load    "extmod"
            Load    "dbe"
            Load    "glx"
            Load    "freetype"
        EndSection
        Section "Monitor"
            Identifier    "Builtin Default Monitor"
            Option    "TargetRefresh"    "75.0"
        EndSection
        Section "Device"
            Identifier    "Builtin Default nv Device 0"
            Driver    "nv"
        EndSection
        Section "Screen"
            Identifier    "Builtin Default nv Screen 0"
            Device    "Builtin Default nv Device 0"
            Monitor    "Builtin Default Monitor"
        EndSection
        Section "Device"
            Identifier    "Builtin Default fbdev Device 0"
            Driver    "fbdev"
        EndSection
        Section "Screen"
            Identifier    "Builtin Default fbdev Screen 0"
            Device    "Builtin Default fbdev Device 0"
            Monitor    "Builtin Default Monitor"
        EndSection
        Section "Device"
            Identifier    "Builtin Default vesa Device 0"
            Driver    "vesa"
        EndSection
        Section "Screen"
            Identifier    "Builtin Default vesa Screen 0"
            Device    "Builtin Default vesa Device 0"
            Monitor    "Builtin Default Monitor"
        EndSection
        Section "Device"
            Identifier    "Builtin Default vga Device 0"
            Driver    "vga"
        EndSection
        Section "Screen"
            Identifier    "Builtin Default vga Screen 0"
            Device    "Builtin Default vga Device 0"
            Monitor    "Builtin Default Monitor"
        EndSection
        Section "ServerLayout"
            Identifier    "Builtin Default Layout"
            Screen    "Builtin Default nv Screen 0"
            Screen    "Builtin Default fbdev Screen 0"
            Screen    "Builtin Default vesa Screen 0"
            Screen    "Builtin Default vga Screen 0"
        EndSection
    (==) --- End of built-in configuration ---
    (==) ServerLayout "Builtin Default Layout"
    (**) |-->Screen "Builtin Default nv Screen 0" (0)
    (**) |   |-->Monitor "Builtin Default Monitor"
    (**) |   |-->Device "Builtin Default nv Device 0"
    (**) |-->Screen "Builtin Default fbdev Screen 0" (1)
    (**) |   |-->Monitor "Builtin Default Monitor"
    (**) |   |-->Device "Builtin Default fbdev Device 0"
    (**) |-->Screen "Builtin Default vesa Screen 0" (2)
    (**) |   |-->Monitor "Builtin Default Monitor"
    (**) |   |-->Device "Builtin Default vesa Device 0"
    (**) |-->Screen "Builtin Default vga Screen 0" (3)
    (**) |   |-->Monitor "Builtin Default Monitor"
    (**) |   |-->Device "Builtin Default vga Device 0"
    (==) |-->Input Device "<default pointer>"
    (==) |-->Input Device "<default keyboard>"
    (==) Keyboard: CustomKeycode disabled
    (WW) The core pointer device wasn't specified explicitly in the layout.
        Using the default mouse configuration.
    (WW) The core keyboard device wasn't specified explicitly in the layout.
        Using the default keyboard configuration.
    (WW) No FontPath specified.  Using compiled-in default.
    (==) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/TTF/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
    (==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
    (==) ModulePath set to "/usr/X11R6/lib/modules"
    (WW) Open APM failed (/dev/apm_bios) (No such file or directory)
    (II) Addressable bus resource ranges are
        [0] -1    0    0x00000000 - 0xffffffff (0x0) MX[B]
        [1] -1    0    0x00000000 - 0x0000ffff (0x10000) IX[B]
    (II) OS-reported resource ranges:
        [0] -1    0    0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [1] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [2] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
        [3] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
        [4] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [5] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
        [6] -1    0    0x00000000 - 0x000000ff (0x100) IX[B]
    (II) PCI Memory resource overlap reduced 0xe0000000 from 0xe7ffffff to 0xdfffffff
    (II) Active PCI resource ranges:
        [0] -1    0    0xeb101000 - 0xeb101fff (0x1000) MX[B]
        [1] -1    0    0xeb000000 - 0xeb0fffff (0x100000) MX[B]
        [2] -1    0    0xeb100000 - 0xeb100fff (0x1000) MX[B]
        [3] -1    0    0xeb206000 - 0xeb2060ff (0x100) MX[B]
        [4] -1    0    0xeb205000 - 0xeb2050ff (0x100) MX[B]
        [5] -1    0    0xeb200000 - 0xeb203fff (0x4000) MX[B]
        [6] -1    0    0xeb204000 - 0xeb204fff (0x1000) MX[B]
        [7] -1    0    0xe0000000 - 0xdfffffff (0x0) MX[B]O
        [8] -1    0    0xe9000000 - 0xe9ffffff (0x1000000) MX[B](B)
        [9] -1    0    0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
        [10] -1    0    0xe8000000 - 0xe8ffffff (0x1000000) MX[B](B)
        [11] -1    0    0x0000e400 - 0x0000e4ff (0x100) IX[B]
        [12] -1    0    0x0000e000 - 0x0000e00f (0x10) IX[B]
        [13] -1    0    0x0000dc00 - 0x0000dc1f (0x20) IX[B]
        [14] -1    0    0x0000d800 - 0x0000d81f (0x20) IX[B]
        [15] -1    0    0x0000d400 - 0x0000d41f (0x20) IX[B]
        [16] -1    0    0x0000d000 - 0x0000d00f (0x10) IX[B]
        [17] -1    0    0x0000cc00 - 0x0000cc03 (0x4) IX[B]
        [18] -1    0    0x0000c800 - 0x0000c807 (0x8) IX[B]
        [19] -1    0    0x0000c400 - 0x0000c403 (0x4) IX[B]
        [20] -1    0    0x0000c000 - 0x0000c007 (0x8) IX[B]
    (II) Active PCI resource ranges after removing overlaps:
        [0] -1    0    0xeb101000 - 0xeb101fff (0x1000) MX[B]
        [1] -1    0    0xeb000000 - 0xeb0fffff (0x100000) MX[B]
        [2] -1    0    0xeb100000 - 0xeb100fff (0x1000) MX[B]
        [3] -1    0    0xeb206000 - 0xeb2060ff (0x100) MX[B]
        [4] -1    0    0xeb205000 - 0xeb2050ff (0x100) MX[B]
        [5] -1    0    0xeb200000 - 0xeb203fff (0x4000) MX[B]
        [6] -1    0    0xeb204000 - 0xeb204fff (0x1000) MX[B]
        [7] -1    0    0xe0000000 - 0xdfffffff (0x0) MX[B]O
        [8] -1    0    0xe9000000 - 0xe9ffffff (0x1000000) MX[B](B)
        [9] -1    0    0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
        [10] -1    0    0xe8000000 - 0xe8ffffff (0x1000000) MX[B](B)
        [11] -1    0    0x0000e400 - 0x0000e4ff (0x100) IX[B]
        [12] -1    0    0x0000e000 - 0x0000e00f (0x10) IX[B]
        [13] -1    0    0x0000dc00 - 0x0000dc1f (0x20) IX[B]
        [14] -1    0    0x0000d800 - 0x0000d81f (0x20) IX[B]
        [15] -1    0    0x0000d400 - 0x0000d41f (0x20) IX[B]
        [16] -1    0    0x0000d000 - 0x0000d00f (0x10) IX[B]
        [17] -1    0    0x0000cc00 - 0x0000cc03 (0x4) IX[B]
        [18] -1    0    0x0000c800 - 0x0000c807 (0x8) IX[B]
        [19] -1    0    0x0000c400 - 0x0000c403 (0x4) IX[B]
        [20] -1    0    0x0000c000 - 0x0000c007 (0x8) IX[B]
    (II) OS-reported resource ranges after removing overlaps with PCI:
        [0] -1    0    0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [1] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [2] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
        [3] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
        [4] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [5] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
        [6] -1    0    0x00000000 - 0x000000ff (0x100) IX[B]
    (II) All system resource ranges:
        [0] -1    0    0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [1] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [2] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
        [3] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
        [4] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [5] -1    0    0xeb101000 - 0xeb101fff (0x1000) MX[B]
        [6] -1    0    0xeb000000 - 0xeb0fffff (0x100000) MX[B]
        [7] -1    0    0xeb100000 - 0xeb100fff (0x1000) MX[B]
        [8] -1    0    0xeb206000 - 0xeb2060ff (0x100) MX[B]
        [9] -1    0    0xeb205000 - 0xeb2050ff (0x100) MX[B]
        [10] -1    0    0xeb200000 - 0xeb203fff (0x4000) MX[B]
        [11] -1    0    0xeb204000 - 0xeb204fff (0x1000) MX[B]
        [12] -1    0    0xe0000000 - 0xdfffffff (0x0) MX[B]O
        [13] -1    0    0xe9000000 - 0xe9ffffff (0x1000000) MX[B](B)
        [14] -1    0    0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
        [15] -1    0    0xe8000000 - 0xe8ffffff (0x1000000) MX[B](B)
        [16] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
        [17] -1    0    0x00000000 - 0x000000ff (0x100) IX[B]
        [18] -1    0    0x0000e400 - 0x0000e4ff (0x100) IX[B]
        [19] -1    0    0x0000e000 - 0x0000e00f (0x10) IX[B]
        [20] -1    0    0x0000dc00 - 0x0000dc1f (0x20) IX[B]
        [21] -1    0    0x0000d800 - 0x0000d81f (0x20) IX[B]
        [22] -1    0    0x0000d400 - 0x0000d41f (0x20) IX[B]
        [23] -1    0    0x0000d000 - 0x0000d00f (0x10) IX[B]
        [24] -1    0    0x0000cc00 - 0x0000cc03 (0x4) IX[B]
        [25] -1    0    0x0000c800 - 0x0000c807 (0x8) IX[B]
        [26] -1    0    0x0000c400 - 0x0000c403 (0x4) IX[B]
        [27] -1    0    0x0000c000 - 0x0000c007 (0x8) IX[B]
    (II) LoadModule: "extmod"
    (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
    (II) Module extmod: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 0.2
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dbe"
    (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
    (II) Module dbe: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 0.2
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "glx"
    (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
    (II) Module glx: vendor="NVIDIA Corporation"
        compiled for 4.0.2, module version = 1.0.7676
        Module class: XFree86 Server Extension
        ABI class: XFree86 Server Extension, version 0.1
    (II) Loading extension GLX
    (II) LoadModule: "freetype"
    (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
        compiled for 6.8.2, module version = 2.1.0
        Module class: X.Org Font Renderer
        ABI class: X.Org Font Renderer, version 0.4
    (II) Loading font FreeType
    (II) LoadModule: "nv"
    (II) Loading /usr/X11R6/lib/modules/drivers/nv_drv.o
    (II) Module nv: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.1
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 0.7
    (II) LoadModule: "fbdev"
    (II) Loading /usr/X11R6/lib/modules/drivers/fbdev_drv.o
    (II) Module fbdev: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 0.1.0
        ABI class: X.Org Video Driver, version 0.7
    (II) LoadModule: "vesa"
    (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.o
    (II) Module vesa: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.0
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 0.7
    (II) LoadModule: "vga"
    (II) Loading /usr/X11R6/lib/modules/drivers/vga_drv.o
    (II) Module vga: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 4.0.0
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 0.7
    (II) LoadModule: "mouse"
    (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
    (II) Module mouse: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.0
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 0.4
    (II) LoadModule: "keyboard"
    (II) Loading /usr/X11R6/lib/modules/input/keyboard_drv.o
    (II) Module keyboard: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.0
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 0.4
    (II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
        Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
        Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
        GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
        GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
        Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
        GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
        GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
        GeForce4 440 Go 64M, Quadro4 NVS, Quadro4 500 GoGL,
        GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
        GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
        GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
        Quadro4 280 NVS, Quadro4 380 XGL, Quadro NVS 50 PCI, GeForce4 448 Go,
        GeForce4 MX Integrated GPU, GeForce3, GeForce3 Ti 200,
        GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600, GeForce4 Ti 4400,
        0x0252, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
        Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
        GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
        Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
        GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
        GeForce FX 5600 Ultra, GeForce FX 5600, 0x0313, GeForce FX 5600SE,
        0x0316, 0x0317, GeForce FX Go5600, GeForce FX Go5650,
        Quadro FX Go700, 0x031D, 0x031E, 0x031F, GeForce FX 5200,
        GeForce FX 5200 Ultra, GeForce FX 5200, GeForce FX 5200SE,
        GeForce FX Go5200, GeForce FX Go5250, GeForce FX 5500,
        GeForce FX 5100, GeForce FX Go5200 32M/64M, 0x0329,
        Quadro NVS 280 PCI, Quadro FX 500/600 PCI, GeForce FX Go53xx Series,
        GeForce FX Go5100, 0x032F, GeForce FX 5900 Ultra, GeForce FX 5900,
        GeForce FX 5900XT, GeForce FX 5950 Ultra, Quadro FX 700,
        GeForce FX 5900ZT, Quadro FX 3000, GeForce FX 5700 Ultra,
        GeForce FX 5700, GeForce FX 5700LE, GeForce FX 5700VE, 0x0345,
        GeForce FX Go5700, GeForce FX Go5700, 0x0349, 0x034B,
        Quadro FX Go1000, Quadro FX 1100, 0x034F, GeForce 6800 Ultra,
        GeForce 6800, GeForce 6800 LE, 0x0043, GeForce 6800 GT, 0x0049,
        Quadro FX 4000, Quadro FX 4400, 0x00C0, 0x00C1, GeForce 6800 LE,
        0x00C8, 0x00C9, 0x00CC, 0x00CE, GeForce 6600 GT, GeForce 6600,
        0x0142, 0x0143, GeForce Go 6600, GeForce 6610 XL,
        GeForce Go 6600 TE/6200 TE, 0x0147, GeForce Go 6600, 0x0149, 0x014B,
        0x014C, 0x014D, Quadro FX 540, GeForce 6200, 0x0160, 0x0166, 0x0210,
        0x0211, 0x021D, 0x021E
    (II) FBDEV: driver for framebuffer: fbdev, afb
    (II) VESA: driver for VESA chipsets: vesa
    (II) VGA: Generic VGA driver (version 4.0) for chipsets: generic
    (II) Primary Device is: PCI 01:00:0
    (--) Assigning device section with no busID to primary device
    (--) Chipset GeForce 6200 found
    (II) resource ranges after xf86ClaimFixedResources() call:
        [0] -1    0    0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [1] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [2] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
        [3] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
        [4] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [5] -1    0    0xeb101000 - 0xeb101fff (0x1000) MX[B]
        [6] -1    0    0xeb000000 - 0xeb0fffff (0x100000) MX[B]
        [7] -1    0    0xeb100000 - 0xeb100fff (0x1000) MX[B]
        [8] -1    0    0xeb206000 - 0xeb2060ff (0x100) MX[B]
        [9] -1    0    0xeb205000 - 0xeb2050ff (0x100) MX[B]
        [10] -1    0    0xeb200000 - 0xeb203fff (0x4000) MX[B]
        [11] -1    0    0xeb204000 - 0xeb204fff (0x1000) MX[B]
        [12] -1    0    0xe0000000 - 0xdfffffff (0x0) MX[B]O
        [13] -1    0    0xe9000000 - 0xe9ffffff (0x1000000) MX[B](B)
        [14] -1    0    0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
        [15] -1    0    0xe8000000 - 0xe8ffffff (0x1000000) MX[B](B)
        [16] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
        [17] -1    0    0x00000000 - 0x000000ff (0x100) IX[B]
        [18] -1    0    0x0000e400 - 0x0000e4ff (0x100) IX[B]
        [19] -1    0    0x0000e000 - 0x0000e00f (0x10) IX[B]
        [20] -1    0    0x0000dc00 - 0x0000dc1f (0x20) IX[B]
        [21] -1    0    0x0000d800 - 0x0000d81f (0x20) IX[B]
        [22] -1    0    0x0000d400 - 0x0000d41f (0x20) IX[B]
        [23] -1    0    0x0000d000 - 0x0000d00f (0x10) IX[B]
        [24] -1    0    0x0000cc00 - 0x0000cc03 (0x4) IX[B]
        [25] -1    0    0x0000c800 - 0x0000c807 (0x8) IX[B]
        [26] -1    0    0x0000c400 - 0x0000c403 (0x4) IX[B]
        [27] -1    0    0x0000c000 - 0x0000c007 (0x8) IX[B]
    (II) Loading sub module "fbdevhw"
    (II) LoadModule: "fbdevhw"
    (II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a
    (II) Module fbdevhw: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 0.0.2
        ABI class: X.Org Video Driver, version 0.7
    (II) FBDEV(1): using default device
    (--) Assigning device section with no busID to primary device
    (--) Chipset vesa found
    (--) Assigning device section with no busID to primary device
    (--) Chipset generic found
    Fatal server error:
    Cannot run in framebuffer mode. Please specify busIDs        for all framebuffer devices
    Please consult the The X.Org Foundation support
         at http://wiki.X.Org
    for help.
    Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    and as second [b]xorg.conf from my home folder:
    # File generated by xorgconfig.
    # Copyright 2004 The X.Org Foundation
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the "Software"),
    # to deal in the Software without restriction, including without limitation
    # the rights to use, copy, modify, merge, publish, distribute, sublicense,
    # and/or sell copies of the Software, and to permit persons to whom the
    # Software is furnished to do so, subject to the following conditions:
    # The above copyright notice and this permission notice shall be included in
    # all copies or substantial portions of the Software.
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
    # The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
    # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    # SOFTWARE.
    # Except as contained in this notice, the name of The X.Org Foundation shall
    # not be used in advertising or otherwise to promote the sale, use or other
    # dealings in this Software without prior written authorization from
    # The X.Org Foundation.
    # Refer to the xorg.conf(5x) man page for details about the format of
    # this file.
    # Module section -- this  section  is used to specify
    # which dynamically loadable modules to load.
    Section "Module"
    # This loads the DBE extension module.
        Load        "dbe"      # Double buffer extension
    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
        SubSection  "extmod"
          Option    "omit xfree86-dga"   # don't initialise the DGA extension
        EndSubSection
    # This loads the font modules
        Load        "type1"
    #    Load        "speedo"
        Load        "freetype"
    #    Load        "xtt"
    # This loads the GLX module
        Load       "glx"
    # This loads the DRI module
    #    Load       "dri"
    EndSection
    # Files section.  This allows default font and rgb paths to be set
    Section "Files"
    # The location of the RGB database.  Note, this is the name of the
    # file minus the extension (like ".txt" or ".db").  There is normally
    # no need to change the default.
        RgbPath    "/usr/X11R6/lib/X11/rgb"
    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
        FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
        FontPath   "/usr/X11R6/lib/X11/fonts/TTF/"
        FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
        FontPath   "/usr/X11R6/lib/X11/fonts/CID/"
        FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
        FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"
        FontPath   "/usr/X11R6/lib/X11/fonts/local/"
    #    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
    #    FontPath   "/usr/X11R6/lib/X11/fonts/TrueType/"
    #    FontPath   "/usr/X11R6/lib/X11/fonts/freefont/"
    # The module search path.  The default path is shown here.
    #    ModulePath "/usr/X11R6/lib/modules"
    EndSection
    # Server flags section.
    Section "ServerFlags"
    # Uncomment this to cause a core dump at the spot where a signal is
    # received.  This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    #    Option "NoTrapSignals"
    # Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
    # (where n is 1 through 12).  This allows clients to receive these key
    # events.
    #    Option "DontVTSwitch"
    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    #    Option "DontZap"
    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
    # sequences.  This allows clients to receive these key events.
    #    Option "Dont Zoom"
    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.
    #    Option "DisableVidModeExtension"
    # Uncomment this to enable the use of a non-local xvidtune client.
    #    Option "AllowNonLocalXvidtune"
    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings.
    #    Option "DisableModInDev"
    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).
    #    Option "AllowNonLocalModInDev"
    EndSection
    # Input devices
    # Core keyboard's InputDevice section
    Section "InputDevice"
        Identifier    "Keyboard1"
        Driver    "kbd"
    # For most OSs the protocol can be omitted (it defaults to "Standard").
    # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
    # uncomment the following line.
    #    Option     "Protocol"      "Xqueue"
        Option "AutoRepeat" "500 30"
    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    #    Option    "Xleds"      "1 2 3"
    #    Option "LeftAlt"     "Meta"
    #    Option "RightAlt"    "ModeShift"
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults).  For example, for a non-U.S.
    # keyboard, you will probably want to use:
    #    Option "XkbModel"    "pc105"
    # If you have a US Microsoft Natural keyboard, you can use:
    #    Option "XkbModel"    "microsoft"
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    #    Option "XkbLayout"   "de"
    # or:
    #    Option "XkbLayout"   "de"
    #    Option "XkbVariant"  "nodeadkeys"
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    #    Option "XkbOptions"  "ctrl:swapcaps"
    # These are the default XKB settings for Xorg
    #    Option "XkbRules"    "xorg"
    #    Option "XkbModel"    "pc105"
    #    Option "XkbLayout"   "us"
    #    Option "XkbVariant"  ""
    #    Option "XkbOptions"  ""
    #    Option "XkbDisable"
        Option "XkbRules"    "xorg"
        Option "XkbModel"    "pc104"
        Option "XkbLayout"    "us"
    EndSection
    # Core Pointer's InputDevice section
    Section "InputDevice"
    # Identifier and driver
        Identifier    "Mouse1"
        Driver    "mouse"
        Option "Protocol"    "ExplorerPS/2"
        Option "Device"      "/dev/psaux"
        Option "ZAxisMapping" "4 5"
        Option "Buttons"       "5"
    # Mouse-speed setting for PS/2 mouse.
    #    Option "Resolution"    "256"
    # When using XQUEUE, comment out the above two lines, and uncomment
    # the following line.
    #    Option "Protocol"    "Xqueue"
    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.
    #    Option "BaudRate"    "9600"
    #    Option "SampleRate"    "150"
    # Emulate3Buttons is an option for 2-button Microsoft mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    #    Option "Emulate3Buttons"
    #    Option "Emulate3Timeout"    "50"
    # ChordMiddle is an option for some 3-button Logitech mice
    #    Option "ChordMiddle"
    EndSection
    # Other input device sections
    # this is optional and is required only if you
    # are using extended input devices.  This is for example only.  Refer
    # to the xorg.conf man page for a description of the options.
    # Section "InputDevice"
    #    Identifier  "Mouse2"
    #    Driver      "mouse"
    #    Option      "Protocol"      "MouseMan"
    #    Option      "Device"        "/dev/mouse2"
    # EndSection
    # Section "InputDevice"
    #    Identifier "spaceball"
    #    Driver     "magellan"
    #    Option     "Device"        "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    #    Identifier "spaceball2"
    #    Driver     "spaceorb"
    #    Option     "Device"        "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    #    Identifier "touchscreen0"
    #    Driver     "microtouch"
    #    Option     "Device"        "/dev/ttyS0"
    #    Option     "MinX"          "1412"
    #    Option     "MaxX"          "15184"
    #    Option     "MinY"          "15372"
    #    Option     "MaxY"          "1230"
    #    Option     "ScreenNumber"  "0"
    #    Option     "ReportingMode" "Scaled"
    #    Option     "ButtonNumber"  "1"
    #    Option     "SendCoreEvents"
    # EndSection
    # Section "InputDevice"
    #    Identifier "touchscreen1"
    #    Driver     "elo2300"
    #    Option     "Device"        "/dev/ttyS0"
    #    Option     "MinX"          "231"
    #    Option     "MaxX"          "3868"
    #    Option     "MinY"          "3858"
    #    Option     "MaxY"          "272"
    #    Option     "ScreenNumber"  "0"
    #    Option     "ReportingMode" "Scaled"
    #    Option     "ButtonThreshold"       "17"
    #    Option     "ButtonNumber"  "1"
    #    Option     "SendCoreEvents"
    # EndSection
    # Monitor section
    # Any number of monitor sections may be present
    Section "Monitor"
        Identifier  "ViewSonic 21PS"
    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
        HorizSync   30-82
    #    HorizSync    30-64         # multisync
    #    HorizSync    31.5, 35.2    # multiple fixed sync frequencies
    #    HorizSync    15-25, 30-50  # multiple ranges of sync frequencies
    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
        VertRefresh 50-160
    EndSection
    # Graphics device section
    # Any number of graphics device sections may be present
    # Standard VGA Device:
    Section "Device"
        Identifier    "Standard VGA"
        VendorName    "Unknown"
        BoardName    "Unknown"
    # The chipset line is optional in most cases.  It can be used to override
    # the driver's chipset detection, and should not normally be specified.
    #    Chipset    "generic"
    # The Driver line must be present.  When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module.  Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.
        Driver     "vga"
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for.  When this line isn't present, a device
    # section can only match up with the primary video device.  For PCI
    # devices a line like the following could be used.  This line should not
    # normally be included unless there is more than one video device
    # intalled.
    #    BusID      "PCI:0:10:0"
    #    VideoRam    256
    #    Clocks    25.2 28.3
    EndSection
    # Device configured by xorgconfig:
    Section "Device"
        Identifier  "** NVIDIA (generic)                   [nv]"
        Driver      "nvidia"
        #VideoRam    131072
        # Insert Clocks lines here if appropriate
    EndSection
    # Screen sections
    # Any number of screen sections may be present.  Each describes
    # the configuration of a single screen.  A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
        Identifier  "Screen 1"
        Device      "** NVIDIA (generic)                   [nv]"
        Monitor     "ViewSonic 21PS"
        DefaultDepth 24
        Subsection "Display"
            Depth       8
            Modes       "1024x768" "800x600" "640x480" "640x400"
            ViewPort    0 0
        EndSubsection
        Subsection "Display"
            Depth       16
            Modes       "1024x768" "800x600" "640x480" "640x400"
            ViewPort    0 0
        EndSubsection
        Subsection "Display"
            Depth       24
            Modes       "1024x768" "800x600" "640x480"
            ViewPort    0 0
        EndSubsection
    EndSection
    # ServerLayout sections.
    # Any number of ServerLayout sections may be present.  Each describes
    # the way multiple screens are organised.  A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option.  In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.
    Section "ServerLayout"
    # The Identifier line must be present
        Identifier  "Simple Layout"
    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens.  The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen.  In this example, screen 2 is located to the
    # right of screen 1.
        Screen "Screen 1"
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used.  Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
        InputDevice "Mouse1" "CorePointer"
        InputDevice "Keyboard1" "CoreKeyboard"
    EndSection
    # Section "DRI"
    #    Mode 0666
    # EndSection
    I mentioned that I've changed from 4xAGP to 8xAGP nvidia card, bios is set correctly and updated. Yesterday evening I tried some different resolution setups in gruub's menu.lst but without any succes for vga=791;792 etc. only video=vesafb works. Another thing that seems to be strange my mouse wheel doesn't function as well and the setup is the same since the day a installed Arch the first time what remains me of my Arch's  one year aniversary - strange   
    :cry:
    Thanks for any help in advance.
    tony[/u]

Maybe you are looking for

  • G/L Account issue in PGI

    Hi Gurus, While creating PGI,  it is picking one G/L account for Intercompany transaction. I have already checked in OBYC it is not  there. Kindly let me know from where that a/c code is being picked during PGI. Kindly give your inputs.

  • Custom Subscreen Not showing on MM03

    Hi, I know it has discussed earlier but my question is as follows: I have created the custom subscreen (created a new screen under SAPLZMGD1 Function Group, added the fields from a Ztable),activaated etc. I  then change the screen sequence in IMG (21

  • How do I create a "playlist" from my list of videos?

    I have quite a number of saved videos but it appears I can only play them one at a time.  Is there a way I can create a playlist like I can with songs?  ie. pick one video, and then add more to the list so I can play back several videos in a row with

  • Tabs Won't Work Right Aligned JPanel

    Hello I'm tring to setup a JPanel using a style object for formating, JPanel.setLogicalStyle(styleimade);, and I haver everything working beautifuly for a left alligned panel, but when I attempt to work with tabs on a panel that is right aligned, Sty

  • Iphone4 and MacbookPro not synching or connecting...

    I just bought a used Macbook Pro to replace my Powerbook G4. I was hoping to be able to finally synch my iphone 4 to my computer, as well as run current versions of all my software etc, however... I'm having some problems. When I try to plug my iphon