GeForce2 MX - MS Starforce 818 S Video - TV Out not working ?

Hi,
I'm using MSI GeForce2 MX Nvidia MS Starforce 818 which have an S-Video video out port in it. A few while back, I try to use this TV Out port for the first time with the S Video cable given upon purchase. Since I have no idea how to use this TV Out port before, I was skimming through everything, and found out that I can use it by clicking on the "Display" properties of windows, go to the "Settings" tabs, and I can choose the display that I want to use, whether a regular monitor I'm using, or to the tv when the S-Video TV Out cable is plugged in. Yesterday I try to do the same thing, and suddenly on the "Display" properties, on the settings tabs, I can't choose where do I want the display to be, and plugging in the S-Video cable only cause the monitor to blank out.
I haven't tried uninstalling the video card, since I can't find the cd that comes with it when I bought the video card about 4 years ago.. and I can't seem to find the drivers on the net as well. I'm using win xp sp 2.
Anyone know how can I use the TV Out port aside from the "Settings" tabs of the "Display" properties of windows ? I'm lost right now, and dunno what is wrong.
Sorry if my english is hard to understand, do let me know if there's anything u can't understand.
Thanks,
Djoni

Now that Nview detects my TV I was hoping that maybe I could select the clone options and use the dual monitor option of my card. Nope, Nview detects the monitor and the tv but all the other options are greyed out. So I cannot use anything else than Standard (Dual View).
Ok. I think i have same problem. I have solved it by connecting my analog monitor to to DVI output with DVI to analog conector that came with the vga card. And it worked. Only now i have another problem. Vga card can't recognize my tv as PAL/G but as M/NTSC. Everytime i reboot my computer it goes back to M/NTSC. I am using detonator drivers 40.72 and with original MSI drivers it worked OK.

Similar Messages

Installed Premiere Pro CS4 but video display does not work?

I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
2) the UI is way too slow for my big beefy system.
My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
Any ideas how to solve this CS4 install issue?
Ron

I would like to thank Dan, Hunt, and Haram:
The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
My PC is brand new with the following "beefy" components:
Motherboard
nForce 790i SLI FTW
Features:
3x PCI Express x16 graphics support
PCI Express 2.0
NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
Overclocking tools
NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
ESA Certified
NVIDIA DualNet and FirstPacket Ethernet technology
Registered
CPU: Intel Core 2 Quad Q9550
S-Spec: SLAWQ
Ver: E36105-001
Product Code: BX80569Q9550
Made in Malaysia
Pack Date: 09/04/08
Features:
Freq.: 2.83 GHz
L2 Cache: 12 MHz Cache
FSB: 1333 MHz (MT/s)
Core: 45nm
Code named: Yorkfield
Power:95W
Socket: LGA775
Cooling: Liquid Cooled
NVIDIAGeForce GTX 280 SC graphics card
Features:
1 GB of onboard memory
Full Microsoft DirectX 10
NVIDIA 2-way and 3-way SLI Ready
NVIDIA PureVideo HD technology
NVIDIA PhysX Ready
NVIDI CUDA technology
PCI Express 2.0 support
Dual-link HDCP
OpenGL 2.1 Capaple
Output: DVI (2 dual-link), HDTV
Western Digital
2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
Features:
10,000 RPM, 3 Gb/sec transfer rate
RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
p/n: TW3X4G1333C9DHX G
product: CM3X2048-1333C9DHX
Features:
XMS3 DHX Dual-Path 'heat xchange'
2048 x 2 MB
1333 MHz
Latency 9-9-9-24-2T
1.6V ver3.2

2nd video card does not work

I have a spare Mac Pro here so I decided to remove the video card and put it in the one I'm using. Both machines were purchased in '09 and use the same video card (ATI Radeon HD 2600). The two monitors I have hooked into the original video card work fine but the monitors I hooked into the newly placed video card are not working. Under the About This Mac specs >> PCI cards it shows up and says driver is installed. Is there anything special you need to do to get a second video card to work?
Thanks.

I tried the SMC reset. I removed the card and reseated it. I'm seating it in slot 2 because that's the only other one that is x16. The other slots 3-4 are x4. Still nothing is showing up. When I go to System Preferences >> Displays >> Detect Dispalys nothing happens. The two displays plugged into the original video card work fine but the newly installed on does not show up. Here is what the Mac Info is detecting. Maybe this makes sense to someone. Not sure what MSI is referring to and the second video card is reading as "display" instead of "ATI Radeon HD 2600". Link speed on the second card is half that of the original.
About This Mac >> More Info >> PCI Cards >> Slot-1
ATI Radeon HD 2600:
Name:    ATY,Lamna
Type:    Display Controller
Driver Installed:    Yes
MSI:    Yes
Bus:    PCI
Slot:    Slot-1
Vendor ID:    0x1002
Device ID:    0x9588
Subsystem Vendor ID:    0x106b
Subsystem ID:    0x00a6
Revision ID:    0x0000
Link Width:    x16
Link Speed:    5.0 GT/s
About This Mac >> More Info >> PCI Cards >> Slot-2
display:
Type:    VGA-Compatible Controller
Driver Installed:    Yes
MSI:    No
Bus:    PCI
Slot:    Slot-2
Vendor ID:    0x10de
Device ID:    0x0393
Subsystem Vendor ID:    0x0000
Subsystem ID:    0x0400
Revision ID:    0x00a1
Link Width:    x16
Link Speed:    2.5 GT/s

Video Filter does not work.

Hello.
I have been using Final Cut Pro 4 for a while and it worked fine before. But recently, any function of Video Filter does not work. I apply them to the clip, but the image does not show any changes on Canvas.
Is the software's problem?
Thanks in advance.
Ying

For a reason unknown to me, FCP's preference files (there's 3 of them) will sometimes become corrupted and need to be trashed. Usually the symptoms are things just not working as they did earlier, or weird issues like the 3 Way Color Corrector looks different than before ... stuff like that.
FCP Rescue is a freeware app (yes, you'll need to download it) that will create a backup set of preferences, thereby retaining all of your settings. Then when (not IF, but when) FCP's preferences become corrupted, you can run FCP Rescue to replace the bad set with a fresh new set.
Otherwise you can delete the files yourself (make sure FCP isn't open at the time) and the next time you launch FCP, it will revert back to the factory settings.
-DH

Video tag is not working in firefox how can we remove this error

Video tag is not working in firefox. In this some kind of mmie type error Kindly remove this error .If you have any kind of solution,Please tell me how can it fix it?

Can you post a link to a publicly accessible page that doesn't require authentication (signing on) where you see such a not working video tag?
Do they work here?
*Firefox Videos: http://www.mozilla.com/firefox/video/
See also:
* https://developer.mozilla.org/en/Media_formats_supported_by_the_audio_and_video_elements

Stereo video recording is not working after updating to ICS

hii am Dilu from India. I updated my xperia mini (ST15i) to ICS. After that stereo video recording is not working. Last week i found a new ICS update and i upadated to build .587 , now also the same problem exsists. Somebody please help
Solved!
Go to Solution.

As I understand the the audio during video recording will be recorded in mono running on ICS.
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

My video recording sounds not working but other sounds are working fine, I've tried clearing the little mic thing near my earphone hole and had no success can someone please help me out?

hhi guys
my video recording sounds not working at all but it's working for other things such as music. I've tried to clear my sound thing near the earphone hole but had no success can someone please help me out?

Had an Iphone 4 for about 3 months now. This happened to the first one I had and they ended up having to replace it at the apple store just a couple weeks ago 6/2. It happened again last night to my new one. This time i was able to correct it by going to itunes, backing up the phone to icloud, and then restoring the software. Mine did not work with voice memo, but did work with headphones plugged in, and would also work on speaker. I could hear callers but they couldn't hear me. I had purchased a new case (lifeproof case at $79.99) because it comes with plugs that cover the headphone jack, and the charging port, and is also waterproof. I heard that the root cause is due to lint, dirt, etc getting inside the headphone jack. Well, must be something else. It's a 10 days old phone, and has been in this overpriced case the whole time, and I have not used the headphones. I hope this doesn't keep happening.

My Video chat is not working with messages.

When someone tries to send me an invite for a video chat the green light shows up but I do not receive and invitation window to accept it.
I am using an aim account on messages and my server settings are api.oscar.aol.com, port 443, and use SSL is checked.
In connection doctor is says my router type is port restricted and that "This computer's network setup includes one or more devices that are not fully compatible with audio and video chatting. I am not sure if this is the reason my video chat is not working.
If anyone can help me please let me know.

Hi,
Most routers can be accessed via Web Browser.
The IP shown in System Preferences > Network > Advanced Button > TCP/IP tab in the "Router IP" box is generally the one to use.
You also tend to need a User ID and Password.
Apple Base Stations are different in that they have an App in the Utilities folder that accesses the set up screens.
Your router can have different methods of opening the ports.
Port Forwarding
This tends to be the oldest of the methods.
Essentially you point a port to an IP (computer) to allow it.
A collection of ports may need to be entered one by one.
Once set up, only that computer can use those ports.
Port Triggering
This cuts down the number of ports set to be Open as it involves "listening" ports that then open further ports
iChat/Messages needs some ports to be open all the time and you set these a bit like Port Forwarding but with listing the IP to send the data to.
The A/V side can have a listening port (port 5678 for the Visible part of the Invite)
The advantage is that multiple computers can use the same ports.
DMZ (Demilitarised Zone)
This is an ON or Off setting (Enable/Disable)
It opens all the port (65535 of them) to one IP (i.e only one computer can use this.)
It is sort of like Port Forwarding Extreme
UPnP (Universal Plug 'n' Play)
A setting that allows the App to tell the router which ports to open.
This means the router can carry on doing DHCP and multiple computer can use the ports involved.
Where these setting are varies at least as much as there are manufacturers.
This is Linksys Port Forwarding (the arrows above the pic show the Others (it does not show DMZ)
7:47 PM Thursday; September 27, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and and iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

FaceTime Video camera is not working

after updating my OS in Macbook Air, my Video camera is not working. pls suggest me about how to fix that and make video working.

If restarting Mac does not fix, see How to Troubleshoot iSight - Apple Support.
If needed, you could also try Reinstalling OS X.
Message was edited by: EZ Jim
Mac OSX 10.10.1

Video & Voice Chat Not Working With ichat

Voice Chat and Video Chat is not working with ichat 6 in booth google and yahoo. One side is ichat and the other side is yahoo & google talk clients, Please confirm whether its a workable scenario or it only supports ichat to ichat.
Thanks & Regards
Sreejith R

Hi
Other alternatives based on the amount of info in your post.
Has she set up her Google Name in iChat or is she logged on via the Web Site (Google Mail page) ?
iChat cannot Video to the Google Mail Login page chat option or to the app called GoogleTalk on a PC.
Another thing.
If you login to the GoogleMail Web pages you will get logged out of iChat (GoogleTalk account) to a partial extent which may explain the loss of Video or Audio iCons.
iChat reports in a Text chat window that you have Logged Off.
However you seem to be able to continue the chat - but it separate from the web Page chat - You send from the web page and that chat will get the next response, send from iChat and it gets the next response (I can't remember if the Buddy told me he got two Chat windows at his end)
9:26 PM Wednesday; May 12, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Video option is not working

Video option is not working after updating the iOS 7

I had this problem too on an iPad 2. It seemed to be stuck on the Photo option. (I had thought that tapping the words Video or Square would work but it doesn't.) On another thread it is said that to select Video or Square just swipe up (or down) the screen with one finger. That certainly works on my iPad 2.
Andrew Spackman

Ichat and Video chat is not working

I really need help. I can not set up my i chat and had someone else do it. They have set up jabber for me but now the video chat is not working. How can I get it working?

Who are you trying to Video to ?
The Jabber side will only Video to other iChat users.
7:46 PM Thursday; June 12, 2008

I am possessing apple iphone4. In my phone while watching video, audio is not working. Volume level is fuul

I Am holding iphone 4.7.1.2. though my volume is full, while on video audio is not working.

Hi klgksharma,
Welcome to the Apple Support Communities!
I understand that you are not hearing sound from the speaker of your iPhone while watching video. In this situation, I would recommend working through the steps in the attached article to troubleshoot.
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
Best regards,
Joe

My video zoom does not work on my iphone or ipad after IOS 7.0.2 update.

After updating iPad and iPhone 4S to IOS7.0.2 the video zoom function does not work. I have also lost the function to zoom on video playback.

Is somebody from Apple monitoring these forums? I do have the same problem, i just recently noticed that the zoom in my video camera is no longer available since I upgraded my 4S iPhone to the newest version.

Audio in video messages does not work

When I record a video message for someone, the audio does not work properly. It either doesn't work at all (silence is recorded), or cuts out after a 1-2 seconds. The problem seems to be confined to the MP4 video/audio encoder used by Skype for video messages.
My webcam (Logitech HD615) works properly when used for Skype calls (including the built in microphone), and when used in other applications. With other applications, I can also record videos and the audio is captured and encoded correctly. Although the problem does not seem to be the webcam, I have re-installled the webcam drivers and I have tried changing USB ports for the webcam.
I have re-installed the latest version of Skype and verified that Windows has the latest updates (I'm using Windows 7). I have tried re-booting a number of times when debugging this issue.
I have looked at the mp4 file that's created in the temp folder when Skype records the message - the audio is missing/broken regardless of what player I use. This, and the fact that the webcam works makes me believe that the problem is in the Skype use of the audio/video encoder, or the encoder itself.
Any ideas on how to solve this problem?
Thanks,
K.
Solved!
Go to Solution.

When you change the USB ports, make sure not to use USB 3.0 ports. I had a very similar issue with Logitech c920 webcam. Changing the port to USB 2.0 has solved the issue.
http://community.skype.com/t5/Windows-desktop-client/No-sound-on-video-messaging-playback/m-p/274382...

GeForce2 MX - MS Starforce 818 S Video - TV Out not working ?

Similar Messages

Maybe you are looking for