Geforce3 Incompatibility Issue with Newer Drivers

Well... now that I know that my GF3 Ti-200 won't work properly with drivers above 44.xx, does anyone know for sure if MSI is aware of this issue? Or is it all just hearsay? Are they doing anything about it? Is there a software fix or BIOS update in the works?
If MSI deviated from the reference design, they should be responsible enough to fix it.

Thaks for your message. I am having similar problem. I have the VGA card just slightly over 18 months and some of my DVDs stopeed playing. I have tried updates of drivers and BIOS, couple removals of MSI WinDVD and new installations.
NOTHING WORKS. I HAVE EVEN SEND THEM AN E-MAIL. They do not seem to give a damn.
I guess that was last time I bought anything from MSI.
George

Similar Messages

When I open a new tab, an unwanted website opens instead of my desired home page. THIS IS ONLY AN ISSUE WITH NEW TABS; (opening the web browser AND clicking on the home button frings me to my desired home page.)

When I open a new tab, an unwanted website opens instead of my desired home page. THIS IS ONLY AN ISSUE WITH NEW TABS; (opening the web browser AND clicking on the home button frings me to my desired home page.)
I have attached the url of the unwanted site.

Use this add-on [https://addons.mozilla.org/en-US/firefox/addon/custom-new-tab/ '''Custom new tab'''].

How can i get my ps 3.0 to install on my laptop ? compatibility issues with newer version of windows

how can i get my ps 3.0 to install on my laptop ? compatibility issues with newer version of windows

It's hopelessly outdated. It's simply not compatible.
Mylenium

Vista SP 1 Sound Issues with Creative Drivers

Hi all, I recently switched to a X-Fi Elite Pro, with a Nvidia Video Card.
Windows Vista SP (32bit)
Intel Pentium D .8 Ghz
2gb RAM
XFX GeForce 8600 GT 52mb running
Creative X-Fi Elite Pro
(it's been a while since I've needed this kind of support so let me know if more info is needed)
Anyways, from the moment Vista plays the logon sound there is static crackling and chirping noises whenever there is audio playing at the same time as any kind of visual change on the screen (not every screen update). For example videos on websites that play them as plugins are especially static-y. However, playing a fullscreen game (i.e. World of Warcraft) does not produce the static.
Interestingly, I have now tried two different video cards. The Nvidia and now a ATI Radeon, both have the same identical problem. I first thought that it might just be a Nvidia Issue but this is not the case
I have checked for IRQ conflicts and none exist that I can find. I have updated Windows as much as I think I can. I've tried changing Creative drivers as well.
Any advice is appreciated.Message Edited by djscotty on 0-04-2009 05:7 [email protected]

Re: Vista SP Sound Issues with Creative Drivers [email protected]

Incompatibility issues with the new flash pplayer

Ever since I installed the new version of flash 11.5 I have had major issues with watching video etc. I am also into astronomy. Myself and many others have paid a lot of money to use Sloohs robotic telescopes in their canary islands observatory.
I now cannot enjoy this because the flash player has compatibility issues with your browser. Me and quite a lot of others are getting rather annyoed this opportunity is being ruined because adobe have released a version of flash without checking it's compatibility with all browsers first.
May I suggest that you contact them and ask that you are notified about new versions and release dates to ensure that you can make necessary amendments to prevent incompatibility issues.
That way lots of angry people like me will not be complaning.

At work, symantec endpoint. At home, norton. Ever since firefox 15, no flash version works except for 11.2. Now that ff18 was pushed out, it "forces" the upgrade to 11.5, and absolutely will not accept anything less. But as with any version of flash that was not 11.2, it just causes firefox to freeze up completely.

Excel 2010 paper size issue with PCL6 drivers after KB2592687 installed on client

When I connect to the RDS server and open Excel with the PCL6 printer and select File / Print the paper size says Custom Paper Size and I can not change the paper size here, in the Page Layout tab or in the drivers properties pages. Using the PS driver there
is no issue. I've tried using several stock PCL6 drivers from Windows 7 and have the same issue such as the HP LaserJet P4014/4015 PCL6. Using the Lanier LP131n PCL6 or PS I had the issue with PS as well.
I do not have the drivers loaded on the server so it is using Remote Desktop Easy Print. If I do load the drivers and allow it to use them then there is no issue but I cannot configure the printers options without taking ownership of the printer so that
is not desirable.
If I do not install KB2592687 then there is no issue, but that is not an option as I am dealing with a customer who's IT manager refuses to remove this, even to test it, and says our printer driver has the issue and is not compliant with MS TS.
Could I be missing any configuration, hotfix, policy that could explain this issue or any other workaround? Or is there a change required to our printer driver for this?
Test setup:
I created a new Windows Server 2008 R2 Standard server with SP1, Added the RDS Role, Installed Office 2010 Professional with SP1 using the Terminal Services product key. No updates were installed. I have tested installing every possible update as well for
both Server and Office.
I then created a new Windows 7 Professional x86 with SP1 client, installed PCL6 & PS printers, installed KB2574819 and KB2592687. No other updates were installed. I have tested installing every possible update as well.

Hi,
Did you find any particular Event ID for your issue?
To troubleshoot this issue, have you tried changing the default printer and printing from other programs such as Word or any other?
The issue which you are facing might occurs because the Microsoft XPS Document Converter (MXDC) determines the paper size by using the FormID value on the server. As you commented that you are using Easy print driver first you can find incorrect paper size
if RD Easy Print printer driver first is enabled.
To work around this issue, use the forms that are defined by the system when you print. The paper sizes for these forms match on the server and on the client computer. Additionally, a printer driver can rename these forms. Please refer below article for more
information.
The client printer may print the documents by using an incorrect paper size if the "Use Remote Desktop Easy Print printer driver first" policy is enabled
Apart from this providing link to understand RD Easy print in Windows 7 & Server 2008 R2.
Hope it helps!
Thanks.

BUG: implied .executeBatch() failing with new drivers?

Our application uses batching with SQLJ and is experiencing an issue with the latest driver versions and Java 1.5. It used to work fine when issuing a few INSERT statements with a specified execution context and then letting the SQLJ COMMIT execute the pending statements in the batch when the transaction was finished. With the new drivers, the SQLJ COMMIT is successful but it doesn't write any of the pending batches to database as it is supposed to (per the Oracle Database SQLJ Developer's Guide and Reference).
In a small testcase I prepared (see the next message for the code), it shows a new batch was created for the first statement (NEW_BATCH_COUNT returned). It also shows subsequent statements are added to the existing batch (ADD_BATCH_COUNT returned). The COUNT() statements show the data never makes it to the database and the table contents were verified in the database after program completion.
Java: 1.5.0_10
Oracle Database: Oracle9i Enterprise Edition Release 9.2.0.1.0 - 64bit Production
Oracle JDBC Driver: 10.2.0.2.0
translator.jar: JPublisher 10g Release 10.2
runtime12.jar: JPublisher 10g Release 10.2
Can anyone please confirm this is a bug?
Thanks much

//---------- C O D E ---------------------------------
package com.sqljtest;
import java.sql.*;
import java.util.*;
import sqlj.runtime.ref.*;
import sqlj.runtime.*;
import oracle.sqlj.runtime.*;
public class Sqljtest extends java.lang.Object {
public static void main(String[] args) {
Connection con = null;
DefaultContext connContext = null;
ExecutionContext ec = null;
try {
String driver = "oracle.jdbc.OracleDriver";
String url = "jdbc:oracle:thin:@127.0.0.1:1521:mysid";
String user = "scott";
String password = "tiger";
DriverManager.registerDriver(new oracle.jdbc.OracleDriver());
con = DriverManager.getConnection(url, user, password);
con.setAutoCommit(false);
connContext = Oracle.getConnection(con);
connContext.getConnection().setAutoCommit(false);
ec = new ExecutionContext();
ec.setBatching(true);
Vector collection = new Vector();
collection.add("one");
collection.add("two");
collection.add("three");
collection.add("four");
collection.add("five");
int rowCount, updateCount;
#sql [connContext] { SELECT COUNT(1) INTO :rowCount FROM sqljtest };
System.out.println("before rowCount:" + rowCount);
for (int i = 0; i < collection.size(); i++) {
#sql [connContext, ec] {
INSERT INTO sqljtest blah VALUES (: ((String)collection.get(i)) )
updateCount = ec.getUpdateCount();
System.out.println("INSERT (" collection.get(i) "): " + updateCount);
#sql [connContext] { SELECT COUNT(1) INTO :rowCount FROM sqljtest };
System.out.println("after inserts rowCount:" + rowCount);
#sql [connContext] {COMMIT};
#sql [connContext] { SELECT COUNT(1) INTO :rowCount FROM sqljtest };
System.out.println("after sqlj commit rowCount:" + rowCount);
} catch (Exception e) {
System.err.println("Exception e: " + e.toString());
} finally {
try {
if (connContext != null && !connContext.isClosed()) {
connContext.close(ConnectionContext.CLOSE_CONNECTION);// .CLOSE_CONNECTION
if (con != null) {
con.close();
} catch (Exception e) {
System.err.println("Exception while closing connections: " + e.toString());
//---------- O U T P U T -----------------------------
run SQLJ Test:
[SQLJ Test] before rowCount:0
[SQLJ Test] INSERT (one): -3
[SQLJ Test] INSERT (two): -4
[SQLJ Test] INSERT (three): -4
[SQLJ Test] INSERT (four): -4
[SQLJ Test] INSERT (five): -4
[SQLJ Test] after inserts rowCount:0
[SQLJ Test] after sqlj commit rowCount:0

Strange Printing Issue With New HP & Pages

Hello!
I have a very strange printing issue with a new HP printer. I have written pages documents heavy in Texts which are located within tables. The documents print fine on a Cannon and Epson printer and look great but when I print the document on my new HP Laserjet Pro 400 Colour M451nw some of the text on some rows come out of the printer looking like they are bold / slightly fuzzy. This only happens with some of the rows of text, not all of them. The font is the same in every row with the same format.
You can see this in the attached image. The first line (Thanks very much) has printed correctly but the subsequent lines look bold / slightly fuzzy.
After a lot of testing the only way I can resolve this is if I copy the content into a new pages document and only then it will print and look ok with the HP printer.
This must be a problem within my origional document. I would simply copy and paste everything into a new document however this would take a very, very long time (over 5 years of work producing teaching materials and over 100 documents and thousands of tables and formatting that cannot be copied and pasted).
Also, on other printers you can see the lines seperating each row of the table. These lines are not visible on the HP print outs, even when the table is copied into a new document.
Has anyone come accross an issue like this before? Is there a way I can fix this without creating a new document? Do I need to get a new another new printer (the 4th printer this week!)?
Any advise, wise words would be greatly apprechiated!
Thanks!

Sorry, Fruhulda. After 4 hours on the phone with Apple care they are taking this issue further themselves. It seems to be a problem with our pages document and the compatibility with certain drivers. We have still not gotton to the bottom of it and Apple are going to get back to me when they have an answer.
We also worked out that the issue only happens when you print via Ethrenet & USB. Printing via Wifi is ok and there are no quality issues.
Very Strange!

570 GTX Twin Frozr II OC - Stability issues with newest drivers

Hi there,
Been noticing lately that i've come across a nasty 280.26 Display driver nvlddmkm stopped responding issue with my 570 SLI.
Some people running the 280.26 drivers have also reported, while others have said increasing voltage has fixed their problem.
Could I get some support in finding out how/what to set my voltages too?
The cards are 570 GTX Twin Frozr II OCs. I did get a bios update earlier in the year after some problems, they were clocked at the wrong speed. (786mh instead of 750mhz)
GPU-Z shows im running bios 70.10.17.00.03
Is there a newer one?
Thanks

Quote from: Arthur Hucksake on 02-September-11, 18:12:57
You say the voltage range is upto 1.25mv , but how can a game be unstable but not make use of the 1.25mV barrier? Who is responsible for using the extra voltage when required?
People state they are increasing their mV to make some DX 11 games stable, but how?
If what your telling me, is that the cards are already set to use an increased voltage, why aren't they doing so?
As you can see, under load.... the higher mV range isn't used so the overclocks on the cards are pointless. The more games which come out that use DX11, the more problems you will get.
If it's down to drivers, someone needs to get onto nVidia from a corporate or business level because they won't respond to the end user, they just blame you guys for everything.
Quote from: Arthur Hucksake on 02-September-11, 18:12:57
You say the voltage range is upto 1.25mv , but how can a game be unstable but not make use of the 1.25mV barrier? Who is responsible for using the extra voltage when required?
Read again my replies, seems you misread most of the parts
Quote from: Arthur Hucksake on 02-September-11, 21:09:00
To add to that, I have to set the voltage to 1.00mv in Afterburner and to get Deus Ex HR more stable with the 280.26 drivers.
So what gives? Is it safe to update the bios to 1.00mv somehow?
Why are these problems only getting found out with the 280.26 drivers?
Where does the customer stand here? There's a direct problem with power handling by all parties involved.
Quote from: Arthur Hucksake on 02-September-11, 21:09:00
To add to that, I have to set the voltage to 1.00mv in Afterburner and to get Deus Ex HR more stable with the 280.26 drivers.
So what gives? Is it safe to update the bios to 1.00mv somehow?
Yes it is, you can use my Tool in signature to do this

Multiple issues with new installation

I have several issues with my fresh installation of arch (just got myself a free old-as laptop , thus trying out arch for the first time as I usually run gentoo), and I'm not sure where these should go. I figure that I may as well lump them all at once while I'm at it.
The laptop model is a Toshiba Dynabook TX/430DX Japanese laptop similar to a Tecra A2 afaik.
1. If I use stock ARCH kernel, when I load up x11 it seems to be using some wrong drivers or something. Tried with and without xorg.conf. The screen is all fuzzy etc. However, I compiled my own kernel (the Zen sources), took out a whole bunch of drivers I knew I wouldn't be using (etc. SATA/IDE/extra whatnot so that it would merely take 3 hours to compile the kernel), x11 works fine. HOWEVER with the zen sources, when I close x11 I can't exit to console. I get some sort of weird artefact from what happened to be on the screen, or it just goes black. It does actually seem to be in console as I can turn off the laptop with ctrl.alt.del and the capslock etc seems to work fine. I'm thinking of recompiling the zen sources with the stock arch kernel config when I have the time just to see what happens, but I'm not too sure it'd help.
The VGA device is an: Intel Corporation 82852/855GM Intergrated Graphics Device (rev 02), using the intelfb module.
2. In most consoles I've used, if you type in part of a command then press ctrl.up/down, it autocompletes with previous commands you've run matching what you've already entered. However, in my install it brings me to the very first command in my bash history. How do I make it autocomplete previous commands?
3. When I use wvdial (I have a mobile modem), I get odd characters as shown in the screenshot posted.
I don't think it's a unicode issue, as ncmpcpp displays properly. This displays itself both in the console and in x11 (screenshot).
4. If I'm using the stock kernel and I stop wvdial, I get a whole bunch of kernel error trace messages. After this, anything that goes to dmesg will be displayed to whatever terminal I'm on (but not actually echoed, it gets overwritten if I change screen etc). Wvdial is also prone to crashing, sometimes taking out the whole laptop. However, while using the zen kernel I do not suffer this issue at all.
Any help in helping me find the source of these issues would be greatly appreciated. They're not showstopping issues, but extremely irritating nonetheless.
Thanks in advance.
EDIT: I created a zen kernel based on the arch stock kernel. Unsurprisingly, I still suffer from the x11 video issue. However, I don't have issues with number 4.
Last edited by ugugii (2009-06-14 00:57:37)

People are probably going to want to know the make/model of the lappy before they can
help.
Deej

Idoc flatfile to IDOC xml issue with new PI7.11 module SAP_XI_IDOC/IDOCFlat

Hi,
I am trying to develop a scenario as mentioned in the blog using the new module available in PI7.1,but I am getting this error
"Error: com.sap.conn.idoc.IDocMetaDataUnavailableException: (3) IDOC_ERROR_METADATA_UNAVAILABLE: The meta data for the IDoc type "ORDERS05" is unavailable."
I have made every configuration correct and IDOC meta data available in both SAP R3 and PI,but it is still complaning about the meta data does not exist.
Blog: http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/13743%3Fpage%3Dlast%26x-order%3Ddate
did anybody face issue with the new module available "SAP_XI_IDOC/IDOCFlatToXmlConvertor",please help me or give me mre information why I am getting this meta data error.
Thank you,
Sri

Hi Sri,
To Convert IDOC Flat file into IDOC xml from the given blog, the IDOC flat file should be present in standard format like:
E2EDK01005                    0000047110815000000000001.........
E2EDKA1003                    0000047110815000000000002.........
E2EDKA1003                    0000047110815000000000003..........
E2EDKA1003                    0000047110815000000000004........
The Flat file have relationship as IDOC Number "000004711081500000" and segment sequence "0000001".
If your flat file is not in this formate so i don't think that module is able to convert into IDOC xml. and if your file is already in this format then it may be issue with destinations which are created in NWA.
Thanks
Harish

Windows Media Player plugin does not install on a fresh install of Firefox 15. This is a real issue with new students.

I have them go to the correct site:
plugin download page on Interoperability Bridges.
My only options are:
1. Have them move some files over manually; which isn't feasible with students who are technically challenged.
2. Have them install an earlier version of Firefox. 11 is the last known good version that accepts the WMP install. The problem I am finding with this is even though I tell them not to update before installing WMP somehow they still manage to do it. A lot of times they don't know how to tell me what version of ANY browser they are using.
Firefox is one of the few browsers that work with our LMS well, but this plug problem is a real issue.
This only pertains to any student who has never had Firefox on their computer prior to 11.
Thanks in advance.

I noticed it after 11, however with 12 students students experienced problems with puzzles in Angel LMS. We had people roll back to 11.
13 came out and that's when the trouble started. I usually stay in beta so I can get a idea of what's working. Once again I had people roll back to 11.
I logged into a system here I had not logged into before and did a fresh install of 11 and I was able to recreate the problem myself.
Getting people on 11 is a little harder this semester because I had to locate the 11 install and send that along with the plugin to new users. The 11 install likes to force the 15 update so they have to get the plugin installed right away. Sometimes the concept is a little much for some people.
Edit: 12 might have been okay, since we were rolling back anyway. I don't recall any issues with WMP the few weeks students had been using it.
Edit 2: I do remember trying to search these forums for the issue and someone posted that they had been experiencing the same problems with 12 beta (at the time it was beta) and I think it was explained as being a beta issue and it never went anywhere else.

Quality issues with new Mac Mini 09?

I've been itching to hit the 'buy' button -- but in reading the many postings about the new Mac Mini, I'm seeing lots of issues with the bluetooth ... *wireless signal* ...
Is there anyone who's not experiencing any problems?
Sounds like it may be a hardware issue with connections... the last thing I want.
My other choice is the 2008 Mac Pro which seems trouble free.
What do you think?
Thanks.

There is a general issue/trend with the new Mini. There are plenty of reports in these forums and the news has begun to hit the wider press; I guess this is more important to a company with only 2-3% desktop share than posts to these forums. I went to the Genius Bar on Saturday and they have now lodged an official bug report with Apple. It looks like the Mini cannot pair with more than one HCI device. So if you pair with the mouse first the keyboard won't work and vice-versa. They don't think the Mini hardware is broken but that we will just have to wait for Apple to fix the firmware.
Where I do agree is that some issues are OS-X 10.5 related and can therefore affect all Macs. The WiFi has issues where it randomly drops, it doesn't seem able to re-connect at all to channels above 13 and only manually to channels below 12. The system resume function is unreliable. All these started when we moved from 10.4 to 10.5 and so far they have not been addressed. One issue is that there does not appear to be a way for users to log bug reports, except when software crashes. However, the bluetooth issues on the Mac do appear real and are either firmware or hardware related.

Version incompatibility issue with Interop.SAPbobsCOM.dll in SBO 2004

Hi,
I have encountered an incompatibility issue in DI API 2004 across different patch level-versions. Originally, I developed an application in SBO 2004 pl4 environment. Now, some of the customers who were installing the application, notified me that the application has a login problem. It turned out that the CompanyClass.connect() method returns an error message "object reference not set to an instance of an object", when the DI API version installed in the production environment is higher (in this case, pl7) than the DI API version which was used in the development environment.
I figured out that the problem can be fixed by replacing the Interop.SAPbobsCOM.dll file in the application directory by a newer version that reflects the DI API that is installed in the system. However, it seems a rather lousy workaround, if the customer needs to manually replace the dll. Maybe the installer could be customized to "sniff" the correct DI API level, but this too would be a pretty kludgy solution.
Does anyone know a better solution to this problem ?
Regards,
Henry

normally this is not a problem as long as they don't change the signatures on the DI-API (which they said they wouldn't) but it appears in P5 they changed that signature... we noticed some enums that got added and a few minor changes.

Issue with new abap webdynpro INBOX EHP5

Hello Experts,
I'm currently working on the configuration of ESS/MSS services in EHP5. We are using different services like Appraisal OSA, Learning solution,etc. I already configured the Launchpad ESS, it's working fine but now I have an issue with the new Abap webdynpro INBOX. The employee and manager see their workitem notifications correctly in their respective inbox.(I'm calling application: IBO_WDA_INBOX that I integrated in my launchpad).
My problem is that when clicking on a workitem in order that it opens me the appraisal document (in edit or display mode), I got an error saying: "There is no iView available for system "": object "SWF_WIOBN". For more information, contact your administrator."
I did some search on SAP help without any results. I'm wondering how should I register workflow tasks? I saw there is a table called IBO_C_WF_TAS (I added entries e.g:
IBO_WDA_INBOX TS99700031   EXECUTEAPPRAISALDOCUMENT).
I tried also to register all my custom tasks in transaction SWFVISU.
example:
TASK: TS99700013
Visualization Type: ABAP Webdynpro
APPLICATION:    HAP_MAIN_DOCUMENT
DYNPARAM   :    sap-wd-configId=HAP_AC_MAIN_DOC
NAMESPACE :    sap
SYSTEM_ALIAS: SAP_Webdynpro_XSS (I did create a system in sap portal under System Administration with as AS property /webdynpro/dispatcher )
Could you let me know what could be wrong, what I missed? Shall I create an iView, if yes which one? which properties?
I would really appreciate any help.
Thanks!

Hello Siddharth,
Thanks for you reply. Still the same issue. Following are the config I did till now:
In the PCD I created a new business object (SWF_WIOBN), an operation linked to the object (NAVIGATE).
I did create an iView (powl) in the custom folder, I integrated the operation within iView. I created a page that contains the iView.
In the properties of the iView I gave:
Application Name: HAP_MAIN_DOCUMENT.
Launch in New Window: "Display in separate Headerless Portal Window".
System: SAP_ECC_HumanResources
I added the required entries in tables:
IBO_C_WF_TTAS
IBO_C_WF_ACS
IBO_V_WF_TAC
IBO_V_WF_TTAC
etc...
I saw in the code of linked feeder class: CL_IBO_INBOX_FEEDER_WI that it's checking something called "Launch_Editor".. Is it a property that we can set somewhere?
Following are the parameters retrieved by system:
BO_NAME       = SWF_WIOBN
BO_OP_NAME = NAVIGATE
LAUNCHER_PARAMETERS -> empty.??
BO_RESOLVE_MODE = USER_SET_OF_ROLES
LAUNCH_EDITOR empty where must be set?
At the end I still get the error:
There is no iView available for system "": object "SWF_WIOBN". For more information, contact your administrator.
Any advice,
Thanks in advance

Geforce3 Incompatibility Issue with Newer Drivers

Similar Messages

Maybe you are looking for