[GeForce4 Ti] Ti4200 TV out doesn't work properly with 78.01 Nvidia Drivers

I downloaded the new Nvidia drivers because the computer was restarting suspiciously after installing a new DVD unit and cloning to the TV. I downloaded the drivers and installed, restarted and everything was working properly. However, when I tried cloning to the TV I got this black and white scrambling terrible image. I have tried checking the plug and everything, changing from PAL to NSTC-M (and some others too) but to no avail. Changing to another resolution, color, etc will only get it worse.
Any suggestions?
H A R A

Then just revert back to the 71.84's and see if the problem continues. Instead of going up, go back if you still have problems. You could even try the 71.89's
I don't recommend re-installing your OS unless you've done it before. It can be a big project if you haven't taken the proper steps to prepare. I don't do that unless it's absolutely necessary, you aren't there yet...
How about you read my suggestions for posting and getting better answers at the top of this vga forum, create a signature, then come back after trying the previous drivers, and if necessary, some older ones. If you stilll have problems, then come back with some history of your PC and what you've tried.
You may want to consider using driver cleaner http://www.drivercleaner.net make sure you read and follow the instructions...

Similar Messages

Firefox from version 3.6 to 11 beta doesn't work properly with gmail

Gmail doesn't work properly with any version of firefox from 3.6 to 11. I have tried several newer versions of firefox and they ALL DO NOT WORK PROPERLY with GMAIL!!!!!! THIS IS VERY FRUSTRATING & ANNOYING!! I can't click on any links or it just keeps saying LOADING when I try to delete a message or even go into the gmail settings.

Try the Firefox SafeMode to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

Satellite Pro L20 doesn't work properly with USB Fast Track audio i.f.

Hello!
I have used my Fast Track USB on new Toshiba Satellite L40 and I never had problems with it. I could set low latency and I did few songs with it.
Yesterday I bought another notebook, thinking of home recording studio. It's used Toshiba Satellite Pro L20. It doesn't work properly with my interface. When I listen music on Winamp or do anything on Fruity Loops I hear loud clicks, pops, noises. They introduce samples, or they appear during playback or after a sample is stopped.
I noticed, drivers for Satellite Pro L20 are a problem. Its not supported by Toshiba anymore?! The only drivers for chipset are very old and you can download em only from Toshiba website. The chipset is ATI Xpress 200M. Its drivers are with graphic card. Recently I noticed you can download "ATI Catalyst Legacy Display Driver for Windows XP - Motherboard/IGP Drivers 9.11" and CRACK IT to make it possible to install on mobile unit such as L20. Yep its funny but its impossible to do otherwise!
things I have tried and they still not help:
# drivers replacement, original were released in 2004. I installed recent version.
# driver settings, low latency, high latency
# asio and different settings
# pluging the interface to another usb socket.
# trying what happens when I use battery and when I use adapter
# updated bios
# turned off onboard units such as wifi card, sound card
# checked IRQ list
pops still appear.
my config:
Toshiba Satellite Pro L20
Win XP Home SP3
Celeron M 1,5GHz
896Mb ram
M-Audio Fast Track USB, drivers: 6.0.2
Kind regards

Thanks for answer. I still have L40 but I try to run my homerecording on L20. The L40 is now used by whole my family. It's possible to swap them but there's a problem - L20 has Norway keyboard and I'm the only person at home who doesn't often look down while typing. In Poland, we use standard ms keyboard. I'd buy special stickers, it's about only to make special chars get back to their places.
I installed Windows on this computer end set it to best performance possible.
Since I created this thread, guys from M-Audio support tried to solve my problem - nothing helped. I think potential solutions are exhausted.
Message was edited by: lidia.pochron

Some of my application in macbook pro doesn't work properly with Os Yosemite, such as dictionary and MplayerX and etc

I face to this problem since new OS, Yosemite has installed on my mac book
some of my application in macbook pro doesn't work properly with Os Yosemite, such as dictionary (mac dictionary) and MplayerX and etc
For example when I make MplayerX and such application fullscreen the screen become white and just voice of video can be heard or when I use Mac Dictionary (look-up dictionary) in any pages the meaning of work is not appear ( look at the picture above), so i need to directly open dictionary to find the meaning.
Please help me
tq

Same thing here with MPlayerX (annoying)

Google News doesn't work properly with Safari 5.1.4

Has anyone else noticed that Google News doesn't work properly with Safari 5.1.4?

Thank you for your response. The more I use 5.1.4 the more problems I am seeing. There are problems with images and layout. I would like to back up to 5.1.3 but the system won't let me. At present I a looking for a solution, or I might just start using Firefox.

Safari doesn't work properly with Ebay

Safari doesn't work properly when listing items on Ebay. Fix it.

Hi Occo
I would rather Apple updates Safari
Then tell Apple, this a user to user forum, although I don't think Apple will update just for your problem as hardly anybody is experiencing the same issue, just a couple on this troubleshooting forum.
this IS NOT A EBAY PROBLEM
Please don't use all caps, it is considered shouting. No this may well not be an ebay problem, but it is not a Safari issue either, it is an issue on your Safari and on your computer. Everyone I know has no trouble with ebay at all. In fact Safari 4.0.4 has made it even faster to log in and browse, buy etc.
id rather apple fixed their software
Again, tell Apple, not us, through the Apple feedback page or file a bug report. They will update Safari if and when they decide, but it will not be to fix what is not broken.
Im sure there would be similiar sites that arent compatible with safari
I agree, as stated before that some sites are just lazy in updating their coding, usually not the high traffic sites though. Other sites only update their code for Windows IE and forget the rest of the world. Firefox, Opera, Camino etc. also can't access some sites.
So in conclusion, try Safari and OSX maintenance and if that fails, then try an archive and install. Because there is nothing wrong with Safari 4.0.4 and ebay, or else this forum would be inundated with thousands upon thousands of users complaining and that is not the case.
Cheers and Good Luck

Premiere CS4 doesn't work properly with Windows 7 trial - Please help!

Hello!
I have installed the trial version of Windows 7 on my laptop and now my Premiere CS4 doesn't play the timeline in real time anymore. It worked fine with Windows Vista. I have also installed the newest Premiere update, but it didn't help. Is there a patch for Windows 7 (64bit) or will I have to wait until the full version comes out and try it again then?
Thanks in advance for your help.
Rafiki

It's a laptop and probably an older one, that means it is probably underpowered.
It's a laptop and that probably means it is a single 5400 rpm disk which is inadequate.
Bill,
Probably good observations. I tend to loose sight of the fact that most laptops are not like mine and forget the common limitations. One mentions "laptop," and I see my Sager - duh! on me.
To the OP, this ARTICLE might also offer some tips on getting your computer ready for an NLE session. Common references are to how things are done in XP-Pro (my OS), but you should be able to "read between the lines," and adapt the general concepts to Win7 and your setup.
Also, giving full specs. on your laptop might help greatly, otherwise we're all just guessing. Bill brings up a couple of critical points. Your details will either point to them, or dismiss them.
Good luck,
Hunt

Javafx webview doesn't work properly with google keywords tool

Hi,
I am trying to load https://adwords.google.com/o/KeywordTool in a javafx webview but I keep getting the following error:
There was an error with your operation. If you were trying to make a change, it may not have saved. Please refresh this page to try again. If the error continues, log out of your AdWords account, then log in again and return to this page.
The issue is not consistent - once every 10 tries it works. I read in another forum that the issue could be due to missing sunjce_provider.jar but it persists even if I add sunjce_provider.jar to the libraries in my Netbeans project.
The test is as follows:
public class TestBrowser extends Application {
@Override
public void start(Stage stage) throws IOException {
StackPane root = new StackPane();
WebView view = new WebView();
WebEngine engine = view.getEngine();
String uri = "https://adwords.google.com/o/KeywordTool";
engine.load(uri);
root.getChildren().add(view);
Scene scene = new Scene(root, 800, 600);
stage.setScene(scene);
stage.show();
public static void main(String[] args) {
launch(args);
Am I doing something wrong ? or missing something ?
Thanks.

Thanks for the reply.
I don't think the problem is with webkit, qwebview from Qt4 works fine for the same site. I used the flag -Djavax.net.debug=all, but it didn't print any debug messages in the console ? I added -Djavax.net.debug=all to command line parameters in the Run dialog of my Netbeans project. Is that the right way to do it ?

Droid bionic's touch screen doesn't work properly with firefox have to use opera

once on Firefox, I have to tap on the screen links many times until it recognizes the touch. the screen will zoom in and out only. scrolling is slow but it functions. it's the touch that doesn't work

For one thing, AT&T does not handle any iPhone repairs or exchanges under warranty so I'm not sure why this Apple rep told you to take the iPhone to an AT&T store regarding a potential warranty claim with the iPhone.
What is going on? Is a $500 phone so sensitive that you have to keep it on a desk top like a computer to use it?
No it is not. I've dropped my iPhone on concrete more than once without being in a case and one time included a bounce and skid across the concrete causing scratches on the back of the case. No problems whatsoever and I've dropped it a few times since I began using a case with no resulting problems either.
http://www.youtube.com/watch?v=czCCavcnNd8
But damage can occur depending on how the iPhone lands just as with any other cell phone.
Since this is a potential warranty claim, I suggest making an appointment at an Apple Store if there is one nearby or call AppleCare (800) 694-7466 and handle this over the phone.

IWork is all white and doesn't work properly with Snow Leopard

Whenever I open Pages or Numbers 09, everything is displayed as white. The text colour is black but I can't see the blinking text mouse icon (which looks like I). I can open templates and can only see the text when I highlight it otherwise the screen is white and I cant even type in a blank document. It all worked fine until I installed Snow Leopard.
I had similar problems with iMovie and iDVD 09 with transparencies not working. Could this be a problem with the graphics driver for my Nvidia 8800 GT? Or is there another way to fix it?

Apple's instructions are:
*Transferring files from one account to another on the same Mac*
*You can use your Shared folder:*
1) Log in to the account you wish to copy files from.
2) In the Finder, navigate to the Shared folder. It is located in the Users folder.
Copy any files or folders you wish to the Shared folder, such as items on your desktop, in your Documents folder, in your Music folder, and so forth. You may be asked to enter an administrator password when copying certain items. Note: To ensure that you copy items (as opposed to moving items), hold the Option key as you drag files to the Shared folder. Depending on item permissions, some files or folders will copy by default, some may move by default.
3) Log out of the current account.
4) Log in to the new account (that you are transferring files to).
5) In the Finder, navigate to the Shared folder. It is located in the Users folder.
Copy any files or folders you wish from the Shared folder to the desired locations, such as desktop, Documents folder, Music folder, and so forth. You may be asked to enter an administrator password when copying certain items.
And I'll add an additional step and a warning:
6) Having copied the files to the new account, Get Info, and change the ownership of them to your new account name. The easiest way to do this is to select each folder inside the user folder (ie Documents, Pictures etc). These should have the permission set properly to the new account owner. Click on the gear icon and select Apply to Enclosed Items
The Warning
It is safe to copy the contents of your Documents, Pictures, Music, Movies and Sites folders but since the problem is likely to be inside the user Library folder it isn't a good idea to copy it. You can probably safely copy your Safari bookmarks (not the entire Safari folder), Calendars, and Mail (but open the folder and delete the Bundles folder inside because it contains Mail plug-ins which might be the problem). I'd be very leery of copying any more than this since doing so might copy the problem into the new user folder. I often copy a one or two items from the Library folder at a time, restart, and then if all seems okay, copy a couple more. But I never copy the Preferences which means re-serializing a lot of programs and one or two programs might need to be reinstalled. The Applications Support folder is another one that may not be safe to copy over, but then again may be. It is one that I move into my new Library folder a couple folders at a time.
In short, moving items into the new account via the Public folder is, itself quite easy though you do need to be sure to that the ownership gets changed to the new account. As I said, the data is easy and safe. The Library is where the problems tend to be.
Incidentally it might seem easier to keep the old account and just moving the user Library elsewhere since that's where the problem is living. I've found that it isn't such a good idea for a number of reasons. Copying to the new account may be more time consuming but safer and in the long run better.

IPod Classic 80gb, 5/6th gen doesn´t work properly with Renault Media Nav?

Hello,
I really hope, anyone in here can I help me. Recently I got an new Renault including the Media Nav Radio System. I wanted to use an Ipod Classic 80gb, 5 or 6th gen. I connect it via USB an everything is fine. The problem that is annoying me, is that if I shut down the Radio by closing the doors with the key an start the Media Nav afterwards, the iPod everytime starts playing from the "All-Songs"-Playlist and not from the point of playback I was listening to, as I stopped playing music. The iPod touch 4g (8gb) in contrast works fine and without any problems.
My question now is: is it possible in general to use the iPod Classic properly or are the Software versions used in Media Nav and iPod incompatible?
Thanks a lot for your help!

So I had a similar problem on my 120 gig classic. After months of go around with the repairs department, we finally figured out the problem. ITUNES 9.0.3, KILLS THE HARD DRIVE on classics. What you need to do is get apple support to send you a REPLACEMENT, do NOT accept a repair, as they are idiots and only try to sync maybe one song, don't get the problem, and will send it RIGHT back to you, unfixed. Believe me, it is a Hard Drive issue. Once you get your new ipod, UNINSTALL itunes 9, and go back to using 8.2.1, it will work believe me. Hope this helps.

Equium A60 doesn't work properly with Logitech Quickcam Fusion

Has anyone managed to use a Logitech Quickcam Fusion webcam with an Equium A60 ?
I've installed the latest available drivers and software and most times it just screws up the operation of the PC. It eventually hangs so badly that I can't even recover using Windows Task Manager!! If I leave the USB lead connected to the PC, 9 times out of ten, it won't boot up into Windows, until I remove the lead :(
I've installed the same software and drivers on my Desktop PC and the camera works fine every time and boots OK with the camera connected to a USB port.
Both PCs are using Win XP with SP2 and all released updates.

Hello Bill
Do you have problems with USB ports if you use other devices? I really don?t know what the problem can be. Check Logitech SUPPORT PAGE
Maybe you will find some advice there.

Flash Player Uninstaller doesn't work properly with Flash 12

Hi,
I've deployed many versions of Flash Player and have been using the generic Flash Player Uninstaller to remove previous version of Flash, followed by an install of the latest. This has been working great until the past few versions of 12.x. Flash Player 12 installs fine, the problem is uninstalling using "uninstall_flash_player.exe".
Run the generic uninstaller
Looks like Flash Player control panel icon has gone...
However, it's still there in Add/Remove Programs and has left an mms.cfg with "AutoUpdateDisable=0" instead of the 1 I had set it to.
The generic flash uninstaller used to remove ARP entries and pretty sure it also removed mms.cfg (or at least didn't change AutoUpdateDisable back to 0).
Can this please be looked into and fixed?
Thanks!

Bug reports for Flash Player should be filed at https://bugbase.adobe.com/
Please post the report number or link back here in the forum.

MBP doesn't work properly with Apple LED Display

I wasn't sure if this should go in this discussion forum or the one created for the cinema display but this makes more sense.
Recently I've been using my MBP (silver with black keys) plugged into my LED cinema display docking station and it's really been acting crazy and not working correctly at all.
Yesterday the computer got stuck in a vicious cycle of putting itself to sleep every 10 seconds or so. I could wake it up with the mouse or keyboard but it would just immediately go back to sleep. I eventually had to hard shut down because it wouldn't give me enough time to do it the humane way.
Today I plugged my laptop into it and the mouse was messed up. The cursor was able to move but the buttons didn't seem to register with the computer. I would hover over the close/min/max buttons but they would't change and I couldn't click anything. The keyboard and everything else worked. Just not the mouse buttons. I had to restart to fix this problem.
Does anybody else have these incompatibility issues with a MBP and the LED Cinema Display??? I don't understand why it's doing this all of a sudden. I've had the display for a year, used it sporadically, and never had issues like this.

I think I may have discovered the problem with my computer getting stuck in the cycle of going to sleep after 10 seconds. It just did it again a minute ago when I plugged my MBP into the display.
I think it's related to the power plug not being all the way in. I have a case on my MBP which makes the power plug fit only one way instead of both (i.e. the direction the wire goes...towards the front or towards the back). When my computer wasn't working correctly previously I had noticed the plug was going back and forth between connected and not because it's magnetic and there's no secure connection into the plug's socket. So today I noticed the same thing. I adjusted the cords so it wouldn't be teetering and now it works.
Go figure....

Zen Vision:m 30gb doesn't work properly with Windows 7 64bit

I recently upgraded my pc from an old xp machine to a new one running windows 7 ultimate. Creative says their media player software that originally shipped with the zen does not support windows 7, so i should use windows media player (the version that ships with windows 7; i cannot find a help dialog box with the version number). Creative also says that the zen vision:m uses only microsoft MTP drivers, so I don't need to upgrade any drivers and it should be compatible. However, although the zen vision:m connects fine and I can see the mp3 files on the zen HDD, I cannot play them in the main windows media player screen. I can only double click on files and play them in the small windows media player window without any controls. Of course, I can't import any of the zen mp3 files into the music library in windows media player or set up any playlists. I checked every menu item and dialog box that i can think of on my zen and in windows 7, but nothing appears to be relevant to this problem. Any ideas, other than buying a brand new mp3 player? TIA

When you connect it & open it WMP click on the SYNC tab of the program. Choose the files you want to sync to the computer then hit SYNC . The files should transfer to the computer. (check your settings as to where you want the files to go.)

[GeForce4 Ti] Ti4200 TV out doesn't work properly with 78.01 Nvidia Drivers

Similar Messages

Maybe you are looking for