GeForce4 ti4400 Lock on Windows XP!

I brazilian and my english is bad, i hope evebody understand, I need a help on the GeForce4 ti4400 board, my computer configuration is a MB D850MV, Pentium4 1.9MHZ, 512 Rambus Memory, GeForce4 ti4400 MSI, HD 80GB Quantum, LG 24x Driver Recordable, CD-ROM Creative 52x, Sound Board SB 5.1 Live. Whem i try to install Windows XP Pro, Windows XP Home or Windows 2000 PRO, on finalizing the installation the computer just Loock! So i put off the GeForce4 ti4400 and put another grafic card on your place, and them complete the installation normally. What I want know if that is a problem with my GeForce4 ti4400? is a incompatibility beteweem the equipament? or my GeForce4 ti4400 is broken?
i really need that help please!!!!!!
thank you!

Here is the link
http://www.bytecomputerspy.com.br/
and the price list is
http://www.bytecomputerspy.com.br/pages/lista_page/lista_page.htm
I living in Curitiba, Paraná State, Brazil. This is sotore is locate on Paraguay, Ciudad del Este, border with Foz do Iguaçu City, have a lady who job in that store and send for me the intens. So you can tell-me what font i have to buy or that font i post work fine? thanks!

Similar Messages

Lock-Ups and Restarts with Geforce4 Ti4400

Hi,
I've been having this problem for quite a while now during 3d games.
My setup is:
Gigabyte GA7VRXP
AMD Athlon 2000+
MSI Geforce4 Ti4400
I guess the rest is irrelevant.
Please help, Thanks,
Eyal Ben David

PSU=Power Supply unit
Who made it?
On it there should be a label with some numbers. on that label there should be the correct numbers for the 3.3V line and the 5V line(celarly stated on the label). There should also be a combined power statement on that very same label. The 3.3V and the 5V are measured in amps.

Geforce4 ti4400 slow

I just got a msi geforce4 ti4400, installed it and even downloaded the latest drivers.
System is WindowsXP Pro.
MSI 850 pro with 512 rdram
1.6 ghz processor intel
I had a geforce2 gts and it gave me benchmarks much higher then my geforce4.
I benchmark Quake2, Halflife, all run very slow compared to my geforce2.
Help, I didn't spend all that money to get a slower vid card!!!!
theo

Obviosly the Ti4400 should be much faster so there is a problem.
A few things to check:
-Set the AGP apature size to 128MB
-Disable AntiAliasing during benchmarking
-Use 29.42 official drivers
-Refresh rate set too low and Vsync is active.
-850Pro (MS6339) had an original AMI bios that was very slow compaired with the later Award bios.

Can you lock a window open?

I've been having a problem that I can't seem to solve. Command-k allows me to connect to the company server quickly, at least it does the first time I use it after startup. If I close the window to the server, subsequent connections take forever.
Our IT guy fixed it once, but the problem is back and he's part-time and not around. It seems that installing a system update undid his fix.
I figured out a work-around, that is IF there's a way to lock the window open so I can't close it, then I don't have to worry about slow connection times after the initial connection.
Does anyone have a way to "lock" the window open? If the red dot could be disabled this would work.

That's what I usually try to do, but sometimes I close it before I realize that I don't want to, and then I have to wait a long time to reconnect to the server.
I'm pretty sure I've seen windows that don't have the standard "red, yellow, green" buttons in the upper left. Usually opened during an install or something. I was hoping for some hack I could apply to the window I want to stay open.

Would like to know how to Completely Lock-down Windows 7 OS

I don't have a general question..
It's more like specifics about how to lock down windows 7 computers..
Here's a little background information...
I have two computers, both with win 7(Pro, and home prem).
A family member can somehow bypass all bios and all windows security services... Everytime I go to work or school, he will power on my desktop and somehow 'hack' into the OS and install keyloggers or viruses so he can obtain my banking or other personal information.
He also unlocks and deletes all the passwords so he can have access whenever he wants..
Can someone please tell me how to do a complete lockdown? This is getting extremely annoying.. I've done everything that I can do; Also considering on switching my major to some sort of computer security. I'm starting to lose my mind over these months.. All
help is appreciated.
I've password protected BIOS
I've disabled administrator accounts, i've put password on the admin and the guest user; locked the option to change passwords..
All help is appreciated. Thank you all in advance.

Hi,
If you are using Windows 7 Professional, Ultimate, or Enterprise, you can use the Local Group Policy Editor to change policies that affect the security of your computer. Please check if the following policies meet you requirements.
[User Configuration\Administrative Templates\Windows Components\Windows Explorer]
Enable these two polices:
Prevent access to drives from My Computer
Hide these specified drives in My Computer
For your reference:
Lock Down PCs with Windows 7:
http://technet.microsoft.com/en-us/windows/gg983426.aspx
Also, restrict Which Programs a User Can Run. You can set rules in AppLocker in the Group Policy Editor that prevents all programs from being run.
In addition, temporarily Lock Your Computer if Someone Tries to Guess Your Password
If you share your computer with other family members or allow your friends to use it, you should have a password on your Windows account so no one else can log into it. However, someone may try to guess your password and log into your account. If this happens,
you can temporarily lock your computer.
You should also periodically change your password.
If you suspect, you family member using a tool to bypass your password. You may use Malicious Software Removal Tool (http://www.microsoft.com/security/pc-security/malware-removal.aspx)
to remove it.
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

Bit locker on Windows 2012 r2 AD And Win 8.1 Client

Can anyone give guidelines/articles for configuring Bit locker on Windows 2012 r2 AD With Win 8.1 Client
I am looking for detailed directions on backing up Bit Lo. & TPM recovery key to AD

Hello,
please start with
https://technet.microsoft.com/en-us/library/dn383581.aspx and
https://technet.microsoft.com/en-us/library/jj592683.aspx?f=255&MSPPError=-2147217396
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

I have a Macbook Air 2011. Can i run Bit-locker in Windows 7 Ultimate without any problems?

I have a Macbook Air 2011. Can i run Bit-locker in Windows 7 Ultimate without any problems?

montana girl wrote:
I purchased a MacBook AIr Nov. 2011 11" and current OS X 10.7.5. I read that I needed to update to Snow Leopard before I can update to Maverick, ...
Whatever you read was incorrect. You can upgrade directly to Mavericks. It is in the App Store and is free.
Snow Leopard predates the operating system you already have. That's the reason it will not install on your MacBook Air. You spent $20 needlessly for it, but it's yours to resell if you wish.

After purchasing the Export PDF Online software when I attempt to perform a "File/Save As" when viewing a document on the web it locks up windows explorer. I receive "FIle Save As - Not Responding"

After purchasing the Export PDF Online software when I attempt to perform a "File/Save As" when viewing a document on the web it locks up windows explorer. I receive "FIle Save As - Not Responding"

I think you may be correct. It is coincidental with my upgrade to Adobe Reader 11.0.10.
I have installed IE 11 (11.0.9600.17690)
It may be an Adobe Reader problem in that the "tools/file save as" dialog is completely empty. No local directories are displayed for saving to. When I try to Close(X) the "File Save As" box it pops up a message box on top that says "Adobe Reader is not Responding" It locks up all of my IE windows, not just the one with the PDF doc.
I need to go go Task Manager and stop the IE task. All my browser windows are then closed.
That is the only way to recover from the "Adobe Reader is Not Responding" message.

Locking IE window-sessions

We have a problem with locking IE window-sessions.
We start two sessions on one PC. In one session we run
long time query and this window is waiting for a result.
Unexpectedly all windows (independent sessions) of that PC are in waiting mode.
Environment: Oracle AS10g 1.0.4, Oracle9i Enterprise Edition Release 9.2.0.1.0, Windows XP, Jinitiator 1.3.1.17

I have just the same problem. forms 9.0.4.2, JInitiator 1.3.1.18.
If one session is busy, then all the other forms sessions are also busy! this is not true concurrency!
any solution?

ITunes + CDROM = locked up Windows

Dell Latitude D610
Windows 2000 SP4
Philips CDRW/DVD SCB5265 Firmware release TD17 (most recent to date)
iTunes v6.0.4
CD Diagnostics locks up Windows so I can't give you any report
Playing a CD locks up Windows after 4~6 seconds of playing
Ripping a CD locks up Windows after just a few seconds as well
In short, anything iTunes does with the CDROM locks up Windows.
No entries in the Event Viewer related to iTunes.
Windows Media Player works just fine, so does the stock Windows CD Player.
Sonic Record Now works just fine too.
iTunes is the only offending application. The symptoms can rather sudden too as CD playback worked for a few months prior to this.
I did an uninstall/registry scrub/temp file deletion/reinstall, same symptoms.
It seems there are others who have posted very similar problems, yet no one has been able to answer them. I'm just throwing this in the pile with the rest.
Dell Inspiron 8600 Windows XP Waiting for the 20GB Nano. A boy can wish, can't he?

Quit iTunes and restart your iPad,
Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If that doesn't work - reset your iPad.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Turning off Opportunistic Locking in Windows 2012 Server?

I have recently switched my database hosting and am having trouble with "Hour Glass" for about 20-30 seconds when trying to save files. I have contacted my application company (Resumate..........database,CRM built on an ACCESS type platform)
and we are brainstorming solutions.
One solution is to turn off opportunistic locking as Windows might actually be locking the file (We have five users using the same file connecting using Remote Desktop Services). Our system has worked seemlessly with our other hosting
option but this delay when trying to save files is not acceptable.
SO, HOW DO WE TURN OFF OPPORTUNISTIC LOCKING IN WINDOWS SERVER 2012 R2?
Thanks Phil H. Charlotte, NC

Hi,
As you may notice that we cannot disable Opportunistic locking in using SMB2 or SMB3.
See:
https://login.live.com/kb/296264/en-us
The opportunistic locking registry keys are valid only for traditional SMB (SMB1). You cannot turn off opportunistic locking for SMB2.
From your description it is the limitation of the application - SMB2 comes with Windows Vista /Windows 2008, which means the vendor of the application did not recommend to use SMB2 or the application is released for earlier systems while SMB2 is not available
at that time.
If there is no update version, you can try to disable SMB2/3 on server to workaround it. Please run this cmdlet:
Set-SmbServerConfiguration -EnableSMB2Protocol $false
More information please refer to:
How to enable and disable SMBv1, SMBv2, and SMBv3 in Windows Vista, Windows Server 2008, Windows 7, Windows Server 2008 R2, Windows 8, and Windows Server 2012
http://support.microsoft.com/kb/2696547
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Locking the window after maximizing it

Hi ,
I am a Mac user for about 2 years and I like it a lot and I 'm happy with it.
However , the only thing bothers me ,is that I can not lock the window after maximizing it like in PC Windows. So when I click on the window by inadvertence, it moves and I have to fit it to full frame manually each time.
Is there any solution for this or maybe the OSX application is done like that and we have to use it as is?
Any help would be much appreciated.

There is no maximize in Mac OS X that is the same as in Windows (window takes over the screen). The little green button at the top left makes the window as large as possible, based on the content of the window and the size of your screen. If you move such a window, clicking it again will move it back into a fully viewable position.

GeForce4 Ti4400 - various problems

I have been having various problems with my card. These include: Pausing for several seconds (like a lock up) then reverting to vga mode; complete freeze where I have to reset the computer; red lines and dots that fill the screen sporadically; a blank screen appears for 2-3 seconds and then back to normal.
In all cases I have to reboot to correct. Sometimes rebooting does not help. The red lines and dots return even on the posting screen. When this happens Windows/XP doesn't even start.
I have to powerthe machine off and let it sit for awhile and then turn it back on.
I'm using the latest driver from the MSI website:
nv4_disp Version 6.13.10.3100
VBA bios info: 4.25.00.22.44
I have a Gigabyte GA7VRXP MB, AMD 1800+ cpu, 512MB pc2700 memory from Samsung, HP cd-writer, lg dvd-rom drive, and 40Gb Maxtor hard drive.
This is all in an antec case Plus880 with true 430 ps
I also get a windows/xp dump file in: windows\logfiles\watchdog Here is what is in there:
// Watchdog Event Log File
LogType: Watchdog
Created: 2002-12-11 08:14:29
TimeZone: 360 - Central Standard Time
WindowsVersion: XP
EventType: 0xEA - Thread Stuck in Device Driver
// The driver for the display device got stuck in an infinite loop. This
// usually indicates a problem with the device itself or with the device
// driver programming the hardware incorrectly. Please check with your
// display device vendor for any driver updates.
ShutdownCount: 126
Shutdown: 0
EventCount: 141
BreakCount: 141
BugcheckTriggered: 1
DebuggerNotPresent: 1
DriverName: nv4_disp
EaRecovery: 1
EventFlag: 1
DeviceClass: Display
DeviceDescription: MSI MS-StarForce GeForce4 Ti 4400 (NVIDIA GeForce4 Ti 4400)
HardwareID: PCI\VEN_10DE&DEV_0251&SUBSYS_87111462&REV_A2
Manufacturer: NVIDIA
DriverFixedFileInfo: FEEF04BD 00010000 0006000D 000A0C1C 0006000D 000A0C1C 0000003F 00000008 00040004 00000003 00000004 00000000 00000000
DriverCompanyName: NVIDIA Corporation
DriverFileDescription: NVIDIA Compatible Windows 2000 Display driver, Version 31.00
DriverFileVersion: 6.13.10.3100
DriverInternalName: nv_disp.dll
DriverLegalCopyright: (c) NVIDIA Corporation. All rights reserved.
DriverOriginalFilename: nv_disp.dll
DriverProductName: NVIDIA Compatible Windows 2000 Display driver, Version 31.00
DriverProductVersion: 6.13.10.3100

I have 98SE so I don't know much about XP, but the artifacts you're seeing and the way it sometimes needs to be left off for a while makes it sound almost like it's overheating, because I had similar screwups when I overclocked another vidcard a few years back too much.
Check the fan on the card to see if it's running and make sure it's getting good ventilation (the card might be too close to another card on the board). If you have access to it, some of that cooling spray they have for testing electronics (might check Radio Shack or a PC store) might help show if it's temp-related or not.
And if you're running an overclock utility, try resetting to card defaults for a while. Running it past a certain point will screw it up even if you have it sitting in a freezer for cooling! :^)
Good luck.

GeForce4 Ti4400 + AMD = trouble

Running with the following components:
Tyan Trinity KT-A motherboard rev B (BIOS v1.10)
AMD Athlon XP 1800+ CPU (Retail package)
1024MB PC133 RAM (1x 512MB, 2x 256MB)
560watt power supply
nVidia GeForce 4 Ti4400 (MSI corporation)
nVidia TNT 2 Ultra (Creative Labs corp)
Sound Blaster Live! Platinum
Roland Sound Canvas SCC-1
D-Link 530TX+ (Network card)
Generic PCI 56K modem
Windows 98 (Second Edition)
Generic 3.5" 1.44MB Floppy
Western Digital Caviar 33100 (3.1GB)
Maxtor 16GB HD
Lite-On 48x CD-ROM
This is a newly assembeled system. With the GeForce 4 card installed, the system freezes before Win 98 finishes booting. According to the bootlog.txt file,
the freeze happens after loading RMM.PDR and BIGMEM.VXD....
I thought maybe the files were corrupted, so I extracted
new copies from the Win 98 CAB files, but to no avail.
I tried many different versions of the GeForce 4 drivers, but also to no avail..the system always froze in the same place....
Just as a test, I replaced the GeForce 4 card with an older TNT 2 Ultra card...Sure enough, the system booted up the Win 98 log-in screen.
Unfortunately, at the Win 98 log-in screen, I see the message that the Sound Blaster Live! card cannot load it's MIDI files, so MIDI playback is disabled.....I then see a "blue screen error" that says the "system memory" is running low, and that Norton Anti-Virus Auto-Protect might not function properly.....
The system is running pretty slow, so when I check the "Windows 98 Performance settings", it says that the Hard Drives (and Floppy Drive) are running in "Compatibility Mode", but with 81% system resources free.
I thought maybe the VIA chip-set divers needed to be updated, so I tried 4 different versions, all having no effect...Also, in the main system information screen, while the correct CPU is displayed (Athlon XP 1800+),
the RAM count only says 1013MB... It becomes more strange because when in "Safe Mode", the RAM count accurately shows 1024MB.
So far, I've tried:
   New and older drivers for GeForce 4 card
   New and older drivers for TNT2 ultra card
   New and older drivers for SB Live card
   New and older drivers for VIA Chipset
I am at a total loss on what to do, so if you could offer any advice or suggestions, I'd be greatful. Do you think replacing Windows 98 with XP could help?
Thank you,
Andrew B.

Woo, finally got Win XP installed, and my GeForce 4 Ti4400 runs GREAT. Also put that extra 512MB back in.
The only problem I'm having now is that any sound coming out of my SB Live (be it, CD Audio, MP3, or something thru the Line-In), starts to get really choppy whenever an IDE device is being accessed (i.e. CD-ROM, hard drive). When the device is not being accessed, the audio is crystal clear. (Never had this problem with Win 98se)
The SB Live card is the only device sitting on IRQ 5, so it's not conflicting with any thing. I've put that card in 4 different PCI slots, but it didn't help.
Any suggestions?
Here's what I've tried so far (following Knowledge Base articles from Creative Labs), all with no improvements:
Disabled unused devices (Serial Ports, USB Ports, Parallel Port, Floppy Drive Controller).
Switched hard drive controller into PIO-Mode only.
Tried 15-16MB memory hole (in BIOS).
Tried lowering EAX reverb.
Lowered both Sound and Graphic acceleration (even lowered to ZERO)
Tried Win XP in both ACPI and non-ACPI modes
Updated VIA drivers to latest version
Udated GeForce 4 drivers
Updated SB Live drivers
Moved SB Live card to 4 different PCI slots
Slowed down AGP slot from 4x to 2x
Installed all of the latest patches/fixes for Win XP.
Nothing has worked yet

App Lock for Windows 8

Is there an app to lock applications and wifi for the windows 8 phones. I need to be able to lock access to my wifi on my phone. Android has an app called app lock that does this.
Sorry if this is the wrong forum to ask this ....

For help using Windows Phone please post in the Windows Phone forum on
http://answers.Microsoft.com .
You may need to provide more information on what you mean by an app lock. Are you looking for
Kids Corner?

GeForce4 ti4400 Lock on Windows XP!

Similar Messages

Maybe you are looking for