[GeForceFX] Gforce fx 5600 3d gaming Artifacts and horizontal lines

Hello all I am new to this forum and very happy I have found it.
Anyways I need some help with my 5600 fx 128. I play americas army and some others games and before the new direct x came out I had no problems with video card.When I tried upgarding to dirext x9 major problem. Now that AA need direct x MY card created artifact and major instability. I have tried ownloading different drivers and have had little or no success. Again when using direct x 8 no problem. I have tried unitalling and reinstalling every drive I could find.
I have searched nividia and windows for similar issues without sucess.
My comp
1 gig ddr 3200
amd 3000+
gigabyte 7vaxp a
msi  geforce4 fx5600

I have tried that and it didnt work either.......I will try again and will repost with results and here are my dirext x testsstem Information
Time of this report: 11/17/2005, 09:08:09
       Machine name: DUSTIN-T5HABAGX
   Operating System: Windows XP Home Edition (5.1, Build 2600) Service Pack 1 (2600.xpsp1.020828-1920)
           Language: English (Regional Setting: English)
System Manufacturer: KT400_
       System Model: AWRDACPI
               BIOS: Award Modular BIOS v6.00PG
          Processor: AMD Athlon(tm) XP 3000+, ~2.2GHz
             Memory: 1024MB RAM
          Page File: 233MB used, 2228MB available
        Windows Dir: C:\WINDOWS
    DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
     DxDiag Version: 5.03.0001.0904 32bit Unicode
DxDiag Notes
  DirectX Files Tab: No problems found.
      Display Tab 1: No problems found. Direct3D 7 test results: Failure at step 32 (User verification of Direct3D rendering): HRESULT = 0x00000000 (error code) Direct3D 8 test results: Failure at step 32 (User verification of Direct3D rendering): HRESULT = 0x00000000 (error code) Direct3D 9 test results: Failure at step 32 (User verification of Direct3D rendering): HRESULT = 0x00000000 (error code)
        Sound Tab 1: No problems found.
          Music Tab: No problems found.
          Input Tab: No problems found.
        Network Tab: No problems found.
DirectX Debug Levels
Direct3D:    0/4 (n/a)
DirectDraw:  0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay:  0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow:  0/6 (retail)
Display Devices
        Card name: NVIDIA GeForce FX 5600             
     Manufacturer: NVIDIA
        Chip type: GeForce FX 5600
         DAC type: Integrated RAMDAC
       Device Key: Enum\PCI\VEN_10DE&DEV_0312&SUBSYS_91231462&REV_A1
   Display Memory: 128.0 MB
     Current Mode: 640 x 480 (32 bit) (60Hz)
          Monitor: Default Monitor
  Monitor Max Res:
      Driver Name: nv4_disp.dll
   Driver Version: 6.14.0010.4523 (English)
      DDI Version: 9 (or higher)
Driver Attributes: Final Retail
 Driver Date/Size: 7/28/2003 14:19:00, 3902603 bytes
      WHQL Logo'd: Yes
  WHQL Date Stamp: n/a
              VDD: n/a
         Mini VDD: nv4_mini.sys
    Mini VDD Date: 7/28/2003 14:19:00, 1341339 bytes
Device Identifier: {D7B71E3E-4052-11CF-7966-29B100C2CB35}
        Vendor ID: 0x10DE
        Device ID: 0x0312
        SubSys ID: 0x91231462
      Revision ID: 0x00A1
      Revision ID: 0x00A1
      Video Accel: ModeMPEG2_A ModeMPEG2_B ModeMPEG2_C ModeMPEG2_D
 Deinterlace Caps: {212DC722-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                   {212DC723-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_MedianFiltering
                   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                   {212DC722-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                   {212DC723-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_MedianFiltering
                   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                   {212DC722-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                   {212DC723-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_MedianFiltering
                   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
         Registry: OK
     DDraw Status: Enabled
       D3D Status: Enabled
       AGP Status: Enabled
DDraw Test Result: Not run
 D3D7 Test Result: Failure at step 32 (User verification of Direct3D rendering): HRESULT = 0x00000000 (error code)
 D3D8 Test Result: Failure at step 32 (User verification of Direct3D rendering): HRESULT = 0x00000000 (error code)
 D3D9 Test Result: Failure at step 32 (User verification of Direct3D rendering): HRESULT = 0x00000000 (error code)

Similar Messages

  • Can't fix jagged images and horizontal lines when scanning

    Hello, I just bought the HP Envy 5660 and it prints fine but scanning is horrible. I keep getting jagged and horizontal lines after scanning. They came out fine a few times but even on 300 ppi it looks bad. Please give me some advice. Thank you.

    Hello Hulkamania,
    Welcome to the HP Forums.
    I see that you are having some issues with the scan quality with lines and jagged images.
    I have seen this issue before and I was able to resolve it quit easily by doing one simple step.
    Please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    Use the ON/OFF button to do a proper power cycle on the printer once it has been connected to a wall outlet.  This will do a Semi Power reset on the printer.
    Try another scan and let me know how it turns out.  Try multiple scans if you like.
    Thanks for your time.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • MSI R9 280X 3G Gaming artifacts and freezes

    I just bought a 2 month old MSI R9 280X 3G Gaming card. After I installed the card my PC didn't POST, so I went into the bios and resetted everything to default. Then again my computer didn't POST. I checked the bios switch on the graphics card, it was set on position 2, I switched it to position 1 and my computer booted into Windows. I installed the catalyst drivers and started to play some games. It went quite bad, I had artifacts, game crashes and overall bad performance.
    I read out the bios version on switch position 1 (the one that does work), this is ver. 015.040.000.000.003435. I flashed the bad bios version on switch 2 which was version 015.040.000.003.003435 with 015.040.000.000.003435.
    After the flash I was able to boot windows on switch 2. Still I do have performance issues with games, like artifacts and game crashes.
    My S/N is 602-V277-38SB1312093272.
    Can you guys help me out with this?
    Thanks in advance!

    Alright, I tried to flash my bios to E7681.430 with the USB DOS tool available on this forum. After my computer booted the USB stick, I was prompted to do a memtest. It hanged, so I wasn't be able to memtest before flashing.
    I download the last version of memtest86+ 5.01 and tried to memtest test 5 and 7 for 20 loops, it passed with 0 errors, so it seems my system is stable. Then I copied your provided BIOS to my USB stick and tried to flash it with M-flash in my current BIOS. M-flash wasn't able to recognize this file, so I won't be able to flash it.
    So with not be able to pass memtest (only my own downloaded memtest86+ v5.01) from the MSI Bios Flash Dos tool and not be able to flash a new bios with M-flash. I'm not sure what to do next, I won't try the Windows flash option, because of this https://forum-en.msi.com/index.php?topic=177335.0  topic.
    On the other hand I looks like I need to update to version 4.3 for me being able to use the r9 280x card.
    Can you give me any advice about what steps to take next? Thanks in advance.

  • How to draw vertical and horizontal lines on chart as shown in image below%3F

    Hi,
    Is it possible to draw a horizontal line (63% as shown in image or 15.75 and vertical line at intersection to X axis) in chart.
    please suggest code
    Regards
    mms79

    Have you tried using cursors?  Right click on the chart and show the cursor legend.  Then right click the legend and add a cursor. 

  • Herringbone lines, and vertical and horizontal lines on display which dims

    I have an iMac G5 purchased in 2005, six months later under the extension program for the video and power issues, Apple installed a new motherboard and a new power pack. Up to now, everything has been okay.
    This morning I turned on my computer and saw the same herringbone lines, vertical lines, horizontal lines on the display which went from dark to light in color. I waited for a while, and a message said to restart my computer which I did.
    Because of the previous problems, I am wondering if the motherboard or power pack is going out again. After the start up, my computer was okay for the rest of the day. I took some photos and a video of it to show what is happening to the display, any suggestions.

    Thanks Scott for the quick reply. Knowing what happened five years ago with the display, I figured that this was the same issue. It is just a matter of time. I quickly backed up my system to another hard drive and wanted to confirm in the discussion group that my G5 was on it's last gasp.
    Since I would be lost without my computer, I just put in an order for the new iMac 27" quad core i5 computer. Now I will have to make monthly payments again, but I think that I will have a much faster, and better computer especially with the Intel processor.
    Thanks for your reply, and I hope that my new computer will last longer than five years. My track record was five years for my lime green iMac G3, and now five years for my iMac G5.
    Thanks again,
    DaisyMay

  • Dropped my iPhone 4 and now There are strange vertical and horizontal line plus red/orange background. What is the problem and how do I fix it ?

    I can't see the apps or unlock my phone but at the top I see the time/mobile service ect.(it is turquise as if the colour has been reversed) and get notifications! Voice control ect. works as well !

    I think that there is a problem with your lcd screen which can only be fixed by replacing the whole lcd assembly. You should definitely take your phone to an apple store and have them fix it. Please dont attempt to replace the lcd screen by yourself because you can and will do more damage to your phone. Take it to an apple store and they will fix it for you.

  • Can you help me fix my screen? It randomly has a bluish tint, bad resolution and horizontal flashing lines

    Hi all,
    It's a 15" 2.4 Ghz Intel Core 2 Duo MBP running on Leopard 10.5.8, bought spring 2008.
    About a couple of weeks ago, my screen started randomly switching to a strange blue / purple tint along with a bad resolution (can't really read text on screen) and flashing horizontal lines in the background. It started worrying me given I'm working with it all the time and am hoping for this machine to hold on for a few more months until I can buy a new one.
    It would happen randomly for a few minutes at a time and then revert back to normal screen.
    I found a lot of references to a similar problem in a few threads such as this one:
    https://discussions.apple.com/thread/1456983?tstart=0
    My screen has gone strange again now and isn't reverting back to normal so far even after I tried  restarting it. It was normal for 2 min only ans then back to bluish. I tried all the display fixes indicated in the threads but none of them work and I'm not exactly sure my issue is the same given I can still see the tint and horizontal lines in particular if the screen saver goes on, and the resolution on screenshots I've seen of other people having blue tint screen issues seems to be normal (as in text is legible).
    Any ideas on how to fix it? Do you think it might be more of a software or hardware problem..? Would it help if I try upgrading my Mac OS?
    Thank you very much for your time

    Thanks a lot for the reply, I was worried would say that outright. Screen just only reverted back to normal after a couple of hours. As you said probably best to bring it in for diagnosis, I'll try to do that asap though of course I'm nowhere neaar any AASP at the moment.

  • My mac is slow, freezing and has horizontal lines.  How do I fix this?

    Hi, my mac is freezing, slowing down and horizontal lines appear.  How do I fix this?

    Run the Hardware Test in Extended mode.
    Using Apple Hardware Test
    Using Apple Hardware Test
    You can use Apple Hardware Test to help determine if there is a problem with your computer’s hardware.
    To use Apple Hardware Test:
    Disconnect all external devices from your computer except the keyboard and mouse. If you have an Ethernet cable connected, disconnect it.
    Insert the “Additional Software & Apple Hardware Test” disc that came with your computer.
    Restart your computer and hold down the “C” key as it starts up. A list of available startup volumes appears. Click Apple Hardware Test and click the right arrow.
    When the Apple Hardware Test main screen appears after about 45 seconds, follow the onscreen instructions.
    If Apple Hardware Test detects a problem, it displays an error code. Make a note of the error code before pursuing support options. If Apple Hardware Test does not detect a hardware failure, the problem may be software related.
    For more information about Apple Hardware Test, see the Apple Hardware Test Read Me file on the “Additional Software & Apple Hardware Test” disc.

  • MSI R9 270X Gaming Artifacts Problem

    My MSI R9 270X Gaming Artifacting GTA IV,Far Cry 3, No Artifact Dead Island,Max Payne 2,Left 4 Dead 2,
    Motherboard:ASUS P5KC
    Processor: Intel Q6600 2.4 GHZ
    4 GB RAM
    PSU: Gigabyte Superb 720 (5 years old)
    Vbios version:015.041.000.000.002887
    PSU Problem?
    Thank you in advance for your answers.

    Quote from: misiizsai on 03-May-14, 05:52:54
    VRAM tester no problem VGA
      what? Did you test it in another pc or what did you try?
    Quote from: misiizsai on 03-May-14, 05:52:54
    which PSU should i buy?
    If you want to try another psu any Corsair single rail psu from 550W and above would be fine. Recommended is Corsair VS Series VS650. Quite cheap but plenty of power for your system. It offers 50A on a single +12v rail.

  • MSI R9 270X 2G Gaming artifacts

    I have artifacts and random graphical glitches in games.
    These tend to occur after gaming for at least an hour.
    I believe I have the latest vbios (here is a rom pulled from the card via GPU-Z: mediafire (dot) com/?3cj808ylqdi11my) and have tried many drivers.
    I have included some screenshots below to give a quick look at the issue. I get the issue at R9 270 clock speed (900 core, 1400 mem)

    Quote from: horsemama1956 on 04-May-14, 03:14:55
    Registered after this thread came up with a google search as I have the same problem(Not so much the giant obvious ones, but the smaller group of clear boxes as seen in the second BF pic).
    I know it's a few weeks late, but try downclocking the memory to 1200 and check. I have the same issues and that eliminates it, and it seems quite common with this model of MSI cards. I think they had a bad batch of memory or just used old 7870s and overclocked the memory instead of using a quicker part. I would RMA it, but you may still get the same issue with an identical replacement.
    I tested 3dmark 11 for like an hour and anything over 1200-1250 memory(same memory speed as a many 7870s) causes issues.
    Yes with with other words all MSI r9 270x 2G are corrupted... so MSI need to give our money back or make a fix for us.. I have pay a lot of money for this card and send 3 RMA's and still get this issue with the new card....... The store don't want give my money back and said that i need contact MSI Well im reading this forum and see many people have the same issue!
    MY Power supply is 800WATT Enermax so thats not the problem of this issue..

  • The Crew –Racing with Your Coolest MSI Gaming Motherboard and Graphics Card

    Most gaming fans are crazy about racing games, and there is a new game title just launched to fulfill gamers’ dream. We want to share with you the experience from Taiwan user who assembles a rig with a brand new MSI Z97 Gaming 5 motherboard and 960 graphics card, along with a hardware and game (The Crew) benchmarks. You may find the original article from:
    https://forum-tc.msi.com/index.php?topic=113352.0
    The Crew - Launch Trailer
    PC configuration:
    CPU: Intel i5-4670K
    RAM: Avexir DDR3-1600 8G*2
    VGA: MSI GTX960 GAMING 2G
    SSD: Kingston HyberX 3K SSD 240G
    CPU Cooler: SilverStone AR01
    The MSI Z97 Gaming 5 motherboard box
    Overview of the motherboard: Black and Red color scheme, it’s also the favorite color combination from MSI’s user reservation.
    The PCI-E slots and bandwidth are enough for a two-way SLI setting.
    Killer Ethernet, outstanding performance on internet access, especially reduce the lag issue.
    The new arrival MSI GTX960 GAMING 2G graphics card
    New cooling design: ZeroFrozr
    The dragon symbol on LED panel
    With MSI Gaming series motherboard plus graphics card, you can enable a Gaming App to overclock CPU and GPU. There are 3 modes to choose.
    6-month free trail of the XSplit game caster software, free bundled with MSI gaming motherboard and graphics card
    Done with assembling, quiet nice color combination and clean cable arrangement.
    An overview of the very gaming look system.
    Some benchmark results before racing with The Crew.
    CPU and GPU info on CPU-Z and GPU-Z applications:
    3DMark Fire Strike score: 6441
    3DMark Fire Strike Extreme score: 3384
    3DMark Fire Strike Ultra score:1262
    The excel performance proof the brand new 960 graphics card comes with good a high Cost/Performance Value.
    Now, check out this test benchmark score of the renowned game “The Crew”.
    The game presents an ultra-quality display, 60 Frames Per Second (FPS)
    FPS: Average frames is at:
    Frames: 3859 - Time: 76828ms - Avg: 50.229 - Min: 43 - Max: 56
    The comments of the game for your reference:
    There are many types of missions that can be chosen from the America’s map.
    Street racing, high-speed collision, breakaway from police, sky jumps, zigzagging, etc… make the game quite dynamic.
    Now, when it comes to multi-player matches, the performance has exceeded expectations. Perhaps, it is the killer Ethernet that’s working the magic. Thus, this game is highly recommended if you have the right rig.
    The downside is that the display intricacy is not as refined as GTA V and in addition, the game FPS is limited at 60 FPS. However, the overall gaming flow and performance is better than good.
    The user's comment for using MSI Gaming 5 motherboard and 960 graphics card:
    (The following commends are translated from user’s article, does not represent the viewpoint of MSI) ^^
    Recently, MSI GTX 960 just launched so the initial price tag is still adjustable.
    According to the current product line, it seems like this GPU is going to replace 750Ti. So once all the stocks (750Ti) at the store empties, we are most likely to see a price drop on GTX960.
    Once the price hits the sweet spot, it’s time to try out GTX960 SLI’s performance.
    The CP value on MSI GTX960 and GAMING 5 MB is pretty high. But the XSplit software that comes with the product is a bit annoying since the authentication steps are divided into 2 parts to go through for using it.     
    Enough said, anyways, GAME ON!

    NVIDIA 960 card  + GAMING 5 motherboard = best bundle for budget gaming!
    it would be nice to see more testing of hardware-demanding games!

  • N460GTX Cyclone 768D5/OC blue artifacts and stopped responding

    In the last month I have been having issues with my graphics card to the point that I can't play any game (at all, always stops responding), flash on websites cause video driver "stopped responding" error, vlc or media player videos cause stopped responding error, and any 3d screen saver preview in windows 7 causes artifacts and sometimes the stopped responding error.  I can still do anything 2D fine but always haver little blue artifacts all over the screen.  Current drivers are Nvidia 266.58, I have tried MSI drivers, Nvidia 260.* drivers and a set of older Nvidia drivers that supposedly didn't have the stopping issues but all had problems even after fully wiping the old drivers on every install.
    Given the power issues I have seen in past threads I hooked up my Kill-a-watt again (I always baseline my systems on burn in with that), and I am finding my Wattage draw hasn't changed.  Kill A Watt measures 188W avg Draw, Peak 250W.  All drives set on RAID to spin up sequentially so I don't get the max draw you'd expect.  I ran this with superPi, prime95 and memtest and all run fine with max draw I saw at 250W.  I tried to run 3d benchmark tests but like all 3d apps they all crash after video card not responding error.  When building this I carefully specd out the power supply with conservative numbers and multiple online calculators, this PS should be able to handle adding 2 more 1TB drives as long as I don't do SLI (don't have room in case anyway with RAID controller).
    I have tried all I can think of to resolve this but nothing helps and I'm thinking it's got to be an issue with the card since nothing in my config has changed.  Is it the card for sure and will need RMA?
    Here are my specs:
    Asus P6T WS Pro Mobo
    Intel Core i7-930 Bloomfield 2.8GHz LGA 1366 130W
    MSI N460GTX Cyclone 768D5/OC GeForce GTX 460 (Fermi) 768MB
    6 GB DDR3 Kingston PC3-10700 8-8-8-24 timing
    Kingston SSDNow V Series 64GB
    Areca ARC-1120 RAID controller (configured RAID6)
    4x Hitachi Deskstar HD31000 1TB 7200 RPM SATA
    2x Samsung 1TB 7200 SATA
    LG Black 10X Blu-ray Burner - Bulk SATA WH10LS30
    Power:
    XFX Black Edition P1-750B-CAG9 750W ATX12V v2.2 / ESP12V v2.91 SLI Ready CrossFire Ready 80 PLUS SILVER
    Single +12V rail, +3.3V@24A, +5V@30A, +12V@62A, [email protected], [email protected]
    From XFX site regarding this PS:
    Tight voltage regulation (±3%)
    Single, high power +12V rail (up to 62A/744W)
    DC to DC voltage Regulator modules for +3.3V and +5V
    High quality Japanese brand capacitors (105°C)
    Solid polymer caps provide enhanced reliability and stability
    Quiet 135mm ball bearing fan provides superior cooling
    Supports multiple high-end graphic adapters (NVIDIA SLI & ATI CrossFire Ready)
    Detachable modular cables
    Energy Star 4.0 and RoHS compliant

    Can you test the card in another system, yours or a friends?

  • Random Artifact and "Could not save (file name) because the file is already in use or left open."

    Hi,
    I've been working on a collage for school, and I 'merged all layers below into one layer', and photoshop left me a random artifact on all my masks. Also, the same file has been suffering the 'Could not save...' problem. I have taken older versions of the file, brought them back to where I had been, and then a similar artifact appears (from various actions). Once the artifact appears, I can undo the action but not the artifact, and the file is useless. It happen on a second file, but the artifact was different (a rectangular hole in the middle of the masks).
    I have a MBP/4GB/MacOSX 10.6.4, everything is up to date.
    If anyone has any suggestions, it would be really appreciated... I'm working for a deadline at school.
    Thanks,
    Patrick

    Hi Chris,
    I have updated both the Adobe suite and the MacOSX. My school has CS5. The holes cut into the image in a geometric pattern (the rectangles) are the random artifact (cropped below).
    Also, I understand 'Could not save...' means it could not save... Why it cannot save seems to be the issue. I believe you understand the circumstances of the 'Could not save...' issue, and it isn't simply that another program has it open.
    http://forums.adobe.com/thread/370206?start=50&tstart=0
    I don't really know if it's Adobe, Apple, or Windows issue, and I don't think it really matters. It is a problem in Photoshop, which would make it an Adobe problem... and waiting for a fix doesn't seem to be a satisfactory answer.
    I don't want to make this tread about politics, I want to fix my file, and I thought it might be another symptom to a bigger problem.
    Thanks for your response,
    Patrick

  • Installing Wii gaming system and DVD player

    How do I install my Wii gaming system and DVD player?  I have an old floor model tv. Prior to Fios, I used a RF audio/video modulator. I still have old movies that my kids want to watch.  Thanks!  I'm not purchasing a new tv when the old one still works.
    Solved!
    Go to Solution.

    Fios should not change anything when it comes to your DVD player or Wii. If you don't have the connectors for everything I would suggest something like a RCA splitter. I take it you dont have a HDTV.

  • How to create artifact and redirect

    HI ,
    I need to implement a use case where there are two Access Manager(7.0) (first named as AM1, other AM2) and an tomcat server. Where AM1 is in some other domain and has trust relationship with AM2. Also AM2 and tomcat are in the same domain.
    Use case:
    When the user is authenticated by 'AM1' I want 'AM1' to create artifact and redirects that artifact to the servlet in tomcat server, This servlet will then send request to AM2 which will send this artifact through SAML request to AM1, AM1 will process the artifact and send SAML assertion through SOAP over https.
    I know this can be implement using SAMLClient API. but I dont want to install jar files on 'AM1'.
    Is there any other way ? If its just a configuration issue please give me the details. I tried following Access Manager documentation and was able to created artifact using SAMLAwareservlet but it fails before redirecting to my servlet.
    Following is the Message I get
    "Failed to Create SSO token"
    Please help,
    Thanks

    It all depends on the current settings of the current SSID.
    You cannot configure a web redirect with another security than none or a pre-shared key on layer2.
    If you are using 802.1x, you can go with the splash page : http://www.cisco.com/en/US/partner/products/ps6366/products_configuration_example09186a0080956185.shtml
    I don't see another friendly method for your users ...
    Nicolas.
    ===
    Don't forget to rate answers that you find useful

Maybe you are looking for

  • Apple TV won't turn on, respond, or appear in iTunes after update-Help!

    The update didn't fully finish, I believe, and eventually I think the Apple TV turned off.  Now it won't turn on on respond in any way. I've tried plugging it into iTunes with micro USB, several times. Never shows up.  It doesn't light up at all no m

  • My Preview is getting hang frequently for PDF files.

    EtreCheck version: 2.1.5 (108) Report generated 26 December 2014 4:43:57 pm IST Click the [Support] links for help with non-Apple products. Click the [Details] links for more information about that line. Click the [Adware] links for help removing adw

  • Preloader problem

    Dear, i have a problem in my preloader, i have 2 scenes, first one the preloader and the another is the content of the site ( 10 frames ) the preloader start showing the loader in 56% not from 0% so the user have to wait from 0% to 56% with blank sta

  • How to trigger a event from simplet gui ?

    I have a very easy mainGUI whi extends JFrame           JPanel pnl = new JPanel(); Container guiFlate = getContentPane(); guiFlate.setLayout(new BorderLayout()); guiFlate.add(pnl, BorderLayout.CENTER); setSize(300, 300); setVisible(true); setBackgrou

  • Pagegroup import error message

    How do I troubleshoot this pagegroup import error message [11-FEB-05 03:03:01][ERROR] id = NULL context = NULL user = KLIES ORA-01403: no data found ORA-06512: at "PORTAL.WWUTL_API_IMPORT_PAGEGROUP", line 4296 ORA-01403: no data found What I'm trying