[GeForceFX] New Drivers

Hello, my question is:
Where can I find the newest NVIDIA VGA Driver 76.45 for Win XP/2000 for FX 5500, 256 mb
For your atention, thankyou very much.

not there
go to guru3d but they r beta
i use them

Similar Messages

1212M Crackling/Popping - New Drivers

I'm kind of cranky about this problem. Read on because I actually know exactly what the problem is (at least for most of us and only Creative/EMU can fix it).
Background
I have a 1212M with the 0404 I/O card. It's a V1 that have had for five or six years. The quality of the sound is great, the features are great and the price is great. There's just one problem. From the day I got the board all those years ago I've had the crackling/popping problem that many, many other users also have.
The problem is not my motherboard, BIOS, other hardware, Windows or other applications. Over the years this EMU board has been in many different systems, many different configurations and the evolution from WinXP, Vista and now to Win7. The crackling problem has always been exactly the same. The problem is the board itself, not the system and not the configuration and I can prove it (read on).
Another thing that frustrates me is all the time that so many users have spent trying to troubleshoot this issue that is completely wasted since, for some of us, the problem is in the EMU hardware/drivers. That's not to say that there aren't some other crackling problems that are related to the system speed, interfering hardware or interfering software. There are actually two different problems that both have the same crackling symptom which makes all this quite confusing. I'll call them "System Related" and "EMU Hardware/Driver Related". If you're having the crackling symptom you should figure out which type of problem you have before spending hours troubleshooting, reinstalling, etc, etc, etc. Here's how:
If your crackling problem:
- Doesn't happen on startup. Your audio is fine and the problem only develops after a while. On my system it's between 60 and 90 minutes and resetting the card.
- Starts with a few minor crackle/pops per second and gradually gets progressively worse over several minutes with nothing else changing in the system (ie not running new software or changing anything).
- After a while (can be a long while) the crackling can actually go away again and you have clean audio. Then the crackling returns. Once again with no changes in system load in between.
- You can make the crackling go away instantly and every time by simply resetting the clock on the card. There are several ways to do this. In Patchmix go to the System tab under Session Settings and switch the clock between internal/external (whatever you have it on, go to the other and back again). Another way is the change the ASIO Buffer Latency milliseconds in your host software's ASIO control panel.
If those four things are all true for you then you have the "EMU Hardware/Driver Related" type of crackling problem. Do not waste any time with all the well-meaning but misguided troubleshooting ideas posted on this and other forums. None of it will help.
If these four things aren't true on your system then by all means you should try all the troubleshooting steps because it's likely that you can resolve your crackling problem.
Here is what is happening with the "EMU Hardware/Driver Related" type of crackling problem. First, let me say that I know what the root of the problem is because I used to work for a company that developed high-end professional video/audio software for Windows PCs. We encountered this exact same problem when some our users started reporting it. It wasn't solely with Creative or EMU hardware because the problem can actually happen on a variety of PC audio cards where the hardware is slightly out of spec or malfunctioning and the software driver is not capable of correcting the problem.
Our most senior software engineers banged their heads against this problem for quite a while until they determined what was going wrong in our customer's PC audio hardware. The issue is that the clock on the card is drifting slightly which means it is going a little faster or slower than the current sample rate. That's why the problem only manifests after a while. It's also why the crackling goes away when you reset the clock. The fundamental issue is that the audio data coming from your PC is being written into a buffer. The data is written by the PC driver and read from the buffer by the card and then sent to the card's output. You can think of the buffer as a big circle of memory. There's a write pointer that writes one value of data and then increments one step and "180 degrees" opposite in the circle of memory is a read pointer that reads one value of data and then increments one step.
These two pointers never move at exactly the same speed. They are constantly slowing down or speeding up a little bit but over time on average they end up advancing at about the same rate. The problem is that when the clock on the card is drifting, the read pointer and write pointer will eventually cross over. That's why the this kind of crackling problem manifests only after a while because, depending on the drifting, it takes a while for the pointers to cross. It's also why the crackling is subtle at first and then gets progressively worse over time. Right when the pointers are overlapping the timing is still close. As one pointer starts to "lap" the other point more and more the crackling artifact gets progressively worse. That's also why the problem usually goes away again if you wait long enough. The pointers can actually get back in phase again for a short while! That's how I know exactly what the current problem is the 1212M board because it manifests with these precise characteristics. The old problem my former companies user's had even sounded exactly the same as the crackling my EMU 1212M has.
Once we understood the problem, in our next version we modified our software to use a larger buffer. This eliminated the problem for some of our customers whose hardware clock was only very slightly out spec. However, for other customers the problem remained, although by increasing the buffer size it made it take longer for the pointers to reach each other and the crackling to begin. This is the what I suspect EMU has done with the new Win7 beta drivers. With the new drivers my crackling takes longer to appear. In these forums we see reports from some long-time sufferers of the problem that the new driver fixed their problem and from others we hear that they are still having the problem.
Since we still had unhappy users of our video/audio application software, we kept working on the issue and eventually came up with a fix that solved the problem for all users and all audio hardware. It was hard to implement but this is what EMU/Creative needs to have their driver engineers do to actually fix the problem (short of replacing an enormous amount of hardware).
The problem can be solved in the driver (yes, my old company actually embedded our own low level generic driver in our application software). Since EMU/Creative is making their driver themselves they can just implement this fix there. The secret is for the driver to actually keep track of where the write and read pointers are and each time they get too close to each other it stretches or shrinks the next packet of data by averaging the audio samples in that packet to the exact size needed to put the pointers 180 degrees apart again. It then resets the pointers as it writes that new data. The data shrink or stretch prevents a single pop or click from happening when the pointers are reset to their correct positions. Frankly, this was hard to implement but it worked perfectly. We actually hired a consultant to figure this audio problem out who was a former Microsoft engineer who wrote the WDM kernal mode drivers.
EMU SUPPORT please let your product manager know that this is what is going on and that he should ask your contract driver engineers to implement this type of solution. Yes, it will cost more in development time (and hence $$$), but it will fix the issue once and for all and not just for this card. You can re-use the code in other drivers.
If you need specific help, I'll even connect you with the engineers that did it for a more detailed explanation (we sold our company years ago and the team has split up but I'm still in contact with most of them).

Markran,
Thank you for the information. I will make sure that it gets routed to the correct people.
Casey

Tried to update iPod, failed, no new drivers installed. Now iPod does not show in my computer or in iTunes.

Anyone know how I can update/unbrick this iPod? It's useless. It's stuck on the screen that says connect to iTunes. iTunes doesn't know it's there. My computer doesn't know it's there. It's not the USB port.
Please don't direct me here - http://support.apple.com/kb/HT1808 - already tried, no results.
Last time it was a missing driver for iTunes but iTunes says nothing new is needed. Help appreciated.

Let me try this again. My computer said my iPod needed an update. I clicked ok. iTunes said it was doing the update. I browsed the internet. I came back to it after it was done, and it said update failed, no new drivers installed. Now my iPod touch is a brick. I cannot use it for anything. You know that screen that shows the usb cable, a white arrow, and iTunes? It's stuck there. No amount of pushing the sleep/wake button and home button will convince it to go to any other screen. When I go to 'My Computer', it does not recognize that there is anything there. It is not the USB port. Everything was fine until the update tried and failed.
I am not installing iTunes (piece of crap software that it is) on the other computer in my apartment.
I have exhausted the articles that sort of go with the problems I am having. They all assume a non brick iPod. Mine is a brick and therefore those articles, including the one you linked, are not relevant.
Not meaning to be rude, but I came into this not caring much for Apple's business model. I've had my iPod for .. a week? Maybe two, and nothing I've seen has convinced me to feel otherwise. Apple's products are supposed to just work. I am not finding that to be the case. Anyone with anything helpful please?

Hi can anyone help me. I have a apple macbook laptop OSX 10.5.8 . When i push print, it shows my printer but says cannot communicate with printer. (epson stylus nx125). Do I need new drivers? Please help . regards Cindy

Hi can anyone help me. I have a apple macbook laptop OSX 10.5.8 . When i push print, it shows my printer but says cannot communicate with printer. (epson stylus nx125). Do I need new drivers? Please help . regards Cindy

Welcome to Apple Support Communities. We're users here and do not speak for "Apple Inc."
Some basic printer troubleshooting steps before worrying about a printer driver:
1. Have you tried turning the printer off and back on?
2A. Is the printer attached with a cable?
     If yes, have you tried unplugging and re-plugging both ends of the printer cable?
     If that does not help, can you test the printer with another cable?
2B. If your printer is not connected to the computer with a cable, have you tried restarting your printer (assuming wireless connection)?
     Have you tried restarting your wireless router?
3. Have you tried restarting your MacBook? (Be sure to save your work first.)
4. Does the printer have ink? (Doesn't usually generate a 'communications error' though)
5. Have you updated OS X or the program you're trying to print from recently?

New drivers won't work for X-Fi Xtreme Gamer

I use Windows XP SP 2 with my X-Fi Xtreme Gamer.
I used the Device Manager to uninstall my old drivers (v2.5.0006), rebooted, cancelled the Windows new-hardware popup, and installed the new drivers (v2.5.0008). I had no sound immediately after the installation, though I think I should have heard mouse-clicking sounds and sounds that accompany opening and closing windows from my desktop and Windows Explorer. After restarting after the installation, I still had no sound.
To restore sound, I uninstalled the new drivers and reinstalled the old ones.
Has anyone else encountered this trouble Does anyone know what is happening
Here is some information on my system:
Operating System: Microsoft Windows XP Home Edition
Version: 5..2600 Service Pack 2 Build 2600
System Name: YOUR-C7B5E9C69F
User Name: YOUR-C7B5E9C69F\Russell
Windows Directory: C:\WINDOWS
System Directory: C:\WINDOWS\system32
Boot Device: \Device\HarddiskVolume
Locale: United States
Hardware Abstraction Layer Version = "5..2600.280 (xpsp_sp2_rtm.040803-258)"
Time Zone: Pacific Standard Time
System Manufacturer: Magnell
System Model: ABS Ultimate M6
System Type: X86-based PC
Motherboard: ASUS A8N-SLI Deluxe NF4 (Socket 939)
Processor: x86 Family 5 Model 7 Stepping 0 Authentic AMD ~263 MHz (AMD Athlon 64 FX-55 (2.63 GHz), socket 939
BIOS Version/Date: Phoenix Technologies, LTD ASUS A8N-SLI DELUXE ACPI BIOS Revision 006, 3/3/2005
SMBIOS Version: 2.3
Memory: Dual DDR GB PC3200XL Corsair
Total Physical Memory: 2,048.00 MB
Available Physical Memory: .68 GB
Total Virtual Memory: 2.00 GB
Available Virtual Memory: .96 GB
Page File Space: 3.85 GB
Page File: C:\pagefile.sys
Video: EVGA NVidia GeForce 6800Ultra 256MB
Video Card Drivers: NVidia Forceware drivers version 6.4.00.756
Hard Dri've: Western Digital Raptor 74GB WD740GD 0,000RPM 8MB
Sound: Creative Labs Soundblaster X-Fi Xtreme Gamer (driver v2.5.0006)
CompUSA Dual Format Double Layer DVD+/-RW USB (R = 6x DVD, 48x CD)
Monitor: Samsung SyncMaster 93c 9 LCD
Mouse: Logitech G9 Laser (Driver v.4.22.52)
Keyboard: Ideazon MERC Stealth Illuminated Gaming Keyboard (Model No. KUH0702)
Printer: HP Photosmart C5580
Mass Storage Device: Corsair Flash Voyager 2.0 GB (USB 2.0 flash memory dri've)
Power: PC Power and Cooling Turbo-Cool 50
Email: Outlook Express version 6.00.2900.280 (xpsp_sp2_rtm.040803-258)
Virus and Spyware Protection: Norton Internet Security 2009
Internet Service Provider: SBC/Yahoo! Pro DSL

I have solved my own problem. The trouble was that using the Device Manager to uninstall my old drivers did not work. Apparently a file that needed to be deleted was not deleted, and that file prevented the new drivers from working. I finally got the new drivers to work by using the following procedure, which except from some notes I have inserted, was obtained by email from Creative support:
1. Go to Control Panel, Add Remove Programs and un-install all listings related to your audio card. Do not restart your computer when prompted so.
2. Go to Control Panel, and switch to Classic View. Click System, Hardware tab, Device Manager button and delete all sound cards entries in Sound, Video and Game Controllers as well as any previous sound card entries from the Device Manager. ?Note: Personally, to get to Device Manager, I don?t follow these directions. I do this: click the Windows Start button + E, look to the left and right-click My Computer, click Properties, click Hardware tab, click Device Manager.
3. Reboot the computer and cancel out of any driver installation if you are prompted. Insert the Creative Sound Blaster installation CD into your CD-ROM dri've. Exit from the installation wizard if it autoruns.
4. Click Start, Run and then Browse. Browse to Z:\Audio\Drivers\CTZAPXX.EXE, where Z represents the CD Rom Dri've. Choose YES if you receive a prompt "Overwrite existing shared creative audio driver files?" NOTE: This CTZAPXX.EXE file could not be found on my X-Fi Xtreme installation disk by using the Z:\Audio\Drivers\CTZAPXX.EXE path. I had do use the Windows Search engine to do a search on my X-Fi Xtreme installation disk. After finding it, I highlighted the CTZAPXX.EXE program, opened it, and continued with these driver-uninstallation instructions. This seems to be a critical step. If your installation disk doesn't have this file, or if you don't have an installation disk, I suggest doing a Web search for CTZAPXX.EXE. It's a Creative Update Utility, so I don't think it will harm your computer. But I use Windows XP, and I don't know anything about Vista.
5. Select Driver un-installation for WDM drivers and click OK.
6. When prompted to restart, say No.
7. Click Start, Run, type MSCONFIG and press Enter.
8. Check the box next to Selecti've Startup and deselect Load Startup Items.
9. Select the SERVICES tab and select Hide All Microsoft Services.
10. Uncheck all results and click OK.
1. Browse to the C:\Temp folder and C:\Windows\TEMP (if it exists) - all files and folders in the temp folder need to be either deleted or moved to a new folder. ?NOTE: I had to go to my C:\Windows\TEMP file to do this step. Also, I took care to copy and paste all of these TEMP files to a new folder before I tried deleting them. Then I deleted all the Windows\TEMP files that I could. Some would not delete. Indeed some of these files could not be copy and pasted to the new folder. But that was okay. I just left alone those files I could not copy and delete, and I proceeded to delete all of the other files. The TEMP files that I could not delete did not affect my uninstallation of old sound drivers or the installation of new sound drivers.
2. Browse to Program Files, Creative and delete the Sound Blaster Folder - if you get a file that won't delete, right click on the file, click Properties and clear all the attributes. The file should then be able to be deleted.
3. Empty the Recycle Bin, and reboot the computer.
4. If you wish to install your new sound drivers, do so now. Otherwise, go to the next step. If you do install you new drivers?which I would do?don?t restart after the installation. Do the next two steps first.
5. Click on Start, Run. Type MSCONFIG and press Enter.
6. Select Normal Startup, and press the OK button.
7. Reboot the computer
8. At this point I copy-pasted all those Windows\TEMP files from my new folder back to their proper place in Windows\TEMP. Then I deleted the new folder. While restoring these TEMP files to the Windows\TEMP file, I got a couple of messages telling me these files already existed. I clicked No. That is, I did NOT replace or overwrite any existing files in the Windows\TEMP folder.
9. The new sound drivers should now be working.
Message Edited by Solipso on 04-22-2009 07:6 AMMessage Edited by Solipso on 04-22-2009 07:7 AM

"Extraction Failed: Cannot Open Output File" error message when installing new drivers

Hello, I'm trying to install new drivers for my HP Photosmart C4385 Printer. I downloaded the full feature drivers for Windows XP 32-bit, and when I start to install (extract), I get the error message:
Extraction Failed
Cannot Open Output File
And the process closes. It happens at about 85% extraction every time.
Any idea why? I called HP but since it is out of warranty they wanted money, which I think as absolutely ridiculous - won't even give me basic support?? Poor, poor customer service.
This question was solved.
View Solution.

Hi,
If you haven't still got the Full Feature software installer, download it from the link below and save it to your Desktop. If you already have it, place it on your Desktop.
ftp://ftp.hp.com/pub/softlib/software10/COL20274/mp-53147-4/100_228_PS_AIO_02_Full_USW_enu_NB.exe
Make sure the Printer is disconnected from your PC.
Download and install 7-ZIP. Once installed, right click on the software installer for your printer, select 7-Zip and choose extract files, then click Ok.
Open the newly extracted folder and double click the setup application to start the installation ( the setup application will probably have the same icon as the original software installer you downloaded ). Connect the printer to your PC when the software asks.
Hope this helps.
Best wishes,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

New drivers for pc cam 850

Hellu there:
Are there any new drivers? I am using the one that came with the cd-rom. that says...2320.
A search of the Creative website does not show anything for the PC CAm 850, under PRoduct, OR sUPPORT.
Anybody can point me in the rigth direction?
TIA

any luck with your PC-CAM 300? I agree with you, this s a great little web cam, I dont understand why Creative doesnt provide a drive for it.
Let me know if you had any chance getting it to work.

BUG: implied .executeBatch() failing with new drivers?

Our application uses batching with SQLJ and is experiencing an issue with the latest driver versions and Java 1.5. It used to work fine when issuing a few INSERT statements with a specified execution context and then letting the SQLJ COMMIT execute the pending statements in the batch when the transaction was finished. With the new drivers, the SQLJ COMMIT is successful but it doesn't write any of the pending batches to database as it is supposed to (per the Oracle Database SQLJ Developer's Guide and Reference).
In a small testcase I prepared (see the next message for the code), it shows a new batch was created for the first statement (NEW_BATCH_COUNT returned). It also shows subsequent statements are added to the existing batch (ADD_BATCH_COUNT returned). The COUNT() statements show the data never makes it to the database and the table contents were verified in the database after program completion.
Java: 1.5.0_10
Oracle Database: Oracle9i Enterprise Edition Release 9.2.0.1.0 - 64bit Production
Oracle JDBC Driver: 10.2.0.2.0
translator.jar: JPublisher 10g Release 10.2
runtime12.jar: JPublisher 10g Release 10.2
Can anyone please confirm this is a bug?
Thanks much

//---------- C O D E ---------------------------------
package com.sqljtest;
import java.sql.*;
import java.util.*;
import sqlj.runtime.ref.*;
import sqlj.runtime.*;
import oracle.sqlj.runtime.*;
public class Sqljtest extends java.lang.Object {
public static void main(String[] args) {
Connection con = null;
DefaultContext connContext = null;
ExecutionContext ec = null;
try {
String driver = "oracle.jdbc.OracleDriver";
String url = "jdbc:oracle:thin:@127.0.0.1:1521:mysid";
String user = "scott";
String password = "tiger";
DriverManager.registerDriver(new oracle.jdbc.OracleDriver());
con = DriverManager.getConnection(url, user, password);
con.setAutoCommit(false);
connContext = Oracle.getConnection(con);
connContext.getConnection().setAutoCommit(false);
ec = new ExecutionContext();
ec.setBatching(true);
Vector collection = new Vector();
collection.add("one");
collection.add("two");
collection.add("three");
collection.add("four");
collection.add("five");
int rowCount, updateCount;
#sql [connContext] { SELECT COUNT(1) INTO :rowCount FROM sqljtest };
System.out.println("before rowCount:" + rowCount);
for (int i = 0; i < collection.size(); i++) {
#sql [connContext, ec] {
INSERT INTO sqljtest blah VALUES (: ((String)collection.get(i)) )
updateCount = ec.getUpdateCount();
System.out.println("INSERT (" collection.get(i) "): " + updateCount);
#sql [connContext] { SELECT COUNT(1) INTO :rowCount FROM sqljtest };
System.out.println("after inserts rowCount:" + rowCount);
#sql [connContext] {COMMIT};
#sql [connContext] { SELECT COUNT(1) INTO :rowCount FROM sqljtest };
System.out.println("after sqlj commit rowCount:" + rowCount);
} catch (Exception e) {
System.err.println("Exception e: " + e.toString());
} finally {
try {
if (connContext != null && !connContext.isClosed()) {
connContext.close(ConnectionContext.CLOSE_CONNECTION);// .CLOSE_CONNECTION
if (con != null) {
con.close();
} catch (Exception e) {
System.err.println("Exception while closing connections: " + e.toString());
//---------- O U T P U T -----------------------------
run SQLJ Test:
[SQLJ Test] before rowCount:0
[SQLJ Test] INSERT (one): -3
[SQLJ Test] INSERT (two): -4
[SQLJ Test] INSERT (three): -4
[SQLJ Test] INSERT (four): -4
[SQLJ Test] INSERT (five): -4
[SQLJ Test] after inserts rowCount:0
[SQLJ Test] after sqlj commit rowCount:0

No sound since I installed new drivers

I installed some newer drivers on my Li've! 24 bit sound card. Now I've lost all sound, I tried rolling back the drivers, still no sound. So I've downloaded the drivers 4 separate times now, still no sound. These are the drivers I installed.
Creative Sound Blaster Li've! 24-bit and Sound Blaster Audigy LS driver .04.0055 (.9 MB)
 Aug 05
Windows XP

http://us.creative.com/support/downloads/download.asp?MainCategory=&sOSName=Windows+XP&regi on=&Product_Name=Li've%2+24-bit&Product_ID=035&modelnumber=&driverlang=033&OS= 0&drivertype=&x=24&y=3
So what do I do now? Can I uninstall the drivers? I'm worried if I do that will cause an error of some type, but frankly that's about all I can think to do. Should I try it, or try something else.
HELP!!!

Have you checked if there is some setting left ON (digital playback, muted channel(s), etc.) after installation?
Also,
- did you got some errer messages while installing?
- try re-install the update by running the ctzapxx.exe --> see the installer settings from -->
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=4892
jutapaMessage Edited by jutapa on 04-22-2006 09:53 AM

Apple 's new drivers for Canon printers

Apple has just released new drivers for Canon printers. I have an i9900 inkjet printer which is not listed in the supported printers. Will the driver work for me or am I out of luck?
Thanks.

The driver update is supplied to Apple from Canon, who has made the decision to end support for the i9900. They actually ended support several versions previously.
So to print from Mavericks to the i9900 you can download and install Gutenprint v5.2.9 which lists the i9900 as a supported device.

Can't add printer, stuck in the eternal "searching for new drivers"

ah, the leopard upgrade mixed blessing continues....
so of course i have no printers available now that i've installed leopard. and of course i need to print TONIGHT. so i went to add the printer while it was plugged into the port - - and this is AFTER reinstalling the drivers from the cd, AND installing all the printer drivers from the leopard cd (this is an epson stylus photo 1400). And i click to add a printer, and the epson stylus does appear in the list, and proceeds to "search for new drivers" before it will let me do anything.... and it spins forever.
it doesnt help that i'm also having the internet problems that many people are having now too.... and i'm not sure if it's consistent, but i think my internet does cut out eventually after it goes into this driver search.
any help at all?
thanks in advance-----
rita

Just wanted to add another voice to this chorus of dismay. While I have properly installed Leopard; re-installed the manufacturer driver (brother HL-2040) reinstalled the Leopard Printer drivers from the optional install Leopard folder, when I go to find printer drivers (none show up initially) I end up getting a pull down menu offering Canon IJ; Epson FireWire;Epson TECP/IP/and HP IP Printing; and that's it. None of the drivers installed show up not even the one brother HL-2040 installed from the manufacturer's disc.(which is all this modest user needs.)
The bottom line: I can't print anything. I tried the reset option mentioned in one of your posts. Any help would be greatly appreciated. Thanks. Mitchull

New drivers made programs show chinese charact

Ok I'm getting kinda pissed here, I installed new drivers for my SB X-Fi Xtreme Music and, well, after the update was done, every textline in the default windows volume control is in chinese, and all the Creative related software is also in chinese, another problem was that my Creative Console Launcher was uninstalled, and even if I try to reinstall my default drivers with the CD that came along with my soundcard, I can't get rid of those **bleep** chinese characters..
Am I going to have to format my whole PC to get this **bleep** thing working properly or what? :S
I'm starting to think not even that will solve this problem.. >.<

Originally Posted by Nambo
I have a Dell XPS 8300 Windows 7 with Sound Blaster X-Fi Xtreme
In unsuccessfully trying to get an output from the optical port, I updated the drivers from Dells own support site.
Now I have no sound, in "Control Panel" "Sounds" has lost any mention of an anologue device even with "show hidden devices "checked.
Device manager claims this device has no drivers, but on the next page the scan says the drivers are up to date.
The thing is, I cannot do anything else such as roll back drivers, delete drivers, even scan drivers without getting the BSOD and the message "IRQL not less or equal", this occurs if I try the same in add/remove programs using creatives own installer.
What can I do?, how can I remove the drivers if the system crashes half way through?
I think you may have downloaded the wrong driver. I did a search online and found many sites that say that the Dell XPS 8300 comes with X-Fi Titanium. You may have downloaded the X-Fi Xtreme driver. You may want to try downloading the X-Fi Titanium driver.
Here is a link on Creative's support site for the latest X-Fi Titanium driver.

Installed New Drivers for SB Audigy2 ZS; Now My Sound Has the "Underwater" Eff

I installed the latest drivers for the SB Audigy2 ZS and I noticed that my sound now has that "underwater" effect. Sorry if I can't exactly explain it better, but I think you know what I'm talking about. I went to go play The Sims 2 after I installed the new drivers and my Sims are talking as is they are talking underwater! lol I really can't explain it. And I have Windows XP is that helps any......
Any thoughts on this?
thanks

Click on Start> ALL Programs > Creative > Creative Audio Console.
Make sure speakers are set to 5. if that's what you're using. I like to Synchronize with Windows Control Panel. Turn EAX to No effects, and/or turn effects to 0%. On the CMSS 3D Tab, turn the Mode to OFF.

I recently updated my computer to 10.6 and now I can't get my printer MX340 (canon ) to work. I have installed the new drivers both from Canon's website and from an earlier post directly from apples website. I would surely appreciate some help with this.

I recently updated my computer to 10.6 and now I can't get my printer MX340 (canon ) to work. I have installed the new drivers both from Canon's website and from an earlier post directly from apples website. I would surely appreciate some help with this.

Try what Terence Devlin posted in this topic:
Terence Devlin
Apr 14, 2015 11:21 AM
Re: Is Iphoto gone ? i want it back!
in response to Johannes666
Recommended
Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
Install the App from the App Store.
Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

Installing new Drivers for Audigy 2

I'm currently playing Vanguard and was told I should update my sound drivers. The drivers I have came with the system and I think they're like from 2005. SO... I have the new drivers but I've had experience in the past of installing sound drivers and never getting the sound to come back. The last time I tried doing it I just rolled my system back to a restore point after giving up on getting the sound back.
Is there a secret to doing it's From my understanding...you just run the application from Creative and it should uninstall the old drivers and install the new ones. That all goes as planned but when I reboot (as prompted) I never have sound. I'm not sure if I'm forgetting to do something or just missing something.
Any suggestions?
Thanks so much.

I haven't had troubles installing updated sound drivers before. Try uninstalling the old ones first and start fresh with the new ones. If it is an upgrade ONLY (needs current drivers), and you have had issues in the past, then i would backup before doing so.
I haven't had any issues with sound drivers before, sorry i couldn't be more help.

[GeForceFX] New Drivers

Similar Messages

Maybe you are looking for