[GeForceFX] Problem updating drivers and playback probs

I have an NVidia FX5200 personal cinema and have constantly had problems udating drivers (crashes or b&w display) - last time I tried the system crashed and no amount of fiddling would allow me to go back so I had to re-install windows and ended up with new install of XP Pro SP2 on reformatted partition - this installed its own FX5200 MSoft driver (something like 5.6) but didn't install any software or capture drivers so I re-installed the drivers from the disk - this ioverwrote with 4.n version drivers. When I tried to update to the latest drivers using MSI live update my pc crashed on start as before with a blue screen message OX0000007E and I was unable to sort this out so ended up re-installing windows AGAIN and starting from scratch once more.
This time I thought I had it sorted and gradually updated the drivers dowloading and updating each of the 7 available and this time each one seemed stable... until I reached the latest 7772 when I got the same blue screen message - fortunately this time I was able to roll back to 6681, which unless 77 is essential, I'm jappy to stick with.
However I am having problems playing avis and mpeg files direct from my hard disk - they both stop briefly, sound stutters or they jerk when playing although they play fine if I burn them to cd and play from the dvd drive.
Any ideas about why I am not able to upgrade drivers successfully and any ideas about why I'm getting playback probs? All help appreciated.
Thanks
alad
System:
AMD 2600
512 ddr ram - 768 page file
WD 120g hdd (90g free and defragged)
Using 32 inch 100htz TV as monitor directly connected to vga card
Sound Trust C-Media driver 5.12.1.639
Installed
Jet audio
Power DVD 5
(tried personal cinema prog which came with card but removed it after problems with TV capture)
Tried installing
FFDshow codecs
latest XVid codecs
Reclock
- none made any difference
Rest of OX message: (OXC0000005; OX8054AF32; OXF89893EO; OXF8989)DC)

Hi Shrek
I just listed my first post. I bought a dell Dimension XPS T500 in 999. It used a CT4780 that fed a good Altec Lansing speaker system. When I built my present budget PC I used the old CT4780 card. Because I?am using XP Pro I loaded Li'veDri'veUni-Pack.exe driver (released 280203). This worked fine.
But I do not have the SPDIF working as yet. My MSI? MS-6533XG?Motherboard does have?header pins for SPDIF but?so far I haven't used them. I am looking for drivers to use if I can get the SPDIF connected.
Do you have any info?on my needs?
Thanks
Bailsburg

Similar Messages

How do I update drivers and BIOS on Satellite P300?

I've been having problems with my wifi, and as my partners laptop is working fine, it was suggested that I might need to update drivers and/or BIOS.
I've tried to do this but where do you download the BIOS/driver updates to?
It just defaults into 'my documents', sits there and does nothing?
After downloading, How do I ensure my notepad 'takes' the updates?
As you can see, I'm not overly technical so any advice in simpletons terms please...
Thanks.

Hello
All drivers and tools for your notebook can be downloaded here:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
At first I would try a WLAN driver update. If you have downloaded the WLAN driver, unzip all files and start the setup.exe file. This will automatically install the new driver and will be used now.

Problems with drivers and Windows after restoring

Hey All, I hope you can help because I have myself a confusing problem.
I have a Satellite A500 series laptop running Windows 7 Premium.
I recently had a hard drive fail. I have replaced the hard drive and used the restore/recovery disks provided to me by Toshiba.
My problem is, during the recovery I am informed that two drivers do not have the necessary Digital Signatures. These are the Realtek RTL9191SE Wireless LAN 802.11n PCI-E NIC and the TOSHIBA Firmware 64 bit Drivers.
Once recover was complete I tried to use the computer and had several issues that may be connected:
1. I cannot get any Microsoft updates- which includes any of the troubleshooting options etc. Apparently the service is not running. Even if I got to the website I can't get anything.
2. My Microsoft Office produce key code (printed on the botton of my laptop) is "incorrect"
3. My wireless will not work because there is no digital signature validation (code 52)
I know my wireless if functional because if I press F8 during boot up I get the option to ignore signature validations and can get on the internet. From there I did download and install an updated driver from the TOSHIBA website, which had no effect (I got the same error, even after uninstalling the other driver). Even while ignoring signatures I cannot update windows or use any of the computers troubleshooting or assistance.
I have tried restoring a second time to no avail (got the exact same errors). Any suggestions to getting this computer back to "out of the box?" Or at least functional enought I can surf the web and work on my Excel charts?
Thanks
Loren

In another thread, a similar problem was solved by installing the Intel driver iata_enu.exe from here.
Intel Rapid Storage Technology
That's supposed to take care of a change in the hard drive's properties.
-Jerry

If you're having problems updating firmware and have Windows Media Player 11 B

I've seen a number of problems with people updating their firmware with WMP installed and it turns out that's the problem. WMP has a bug in it that will not allow the firmware update to recognize the player. So, here's what to do to roll back to a previous version:
These instructions will only work for Windows XP
You must be logged on as an administrator or a member of the Administrators group to perform the following procedure.
. Disconnect any portable music or video devices that might be attached to your computer.
2. Click Start, and then click Control Panel.
3. In the Category View of Control Panel, click Add or Remove Programs, and then click Remove a program.
4. Click Windows Media Player , and then click Remove.
If Windows Media Player is not displayed in the list of currently installed programs, then try the following:
. At the top of the list, select the Show updates check box.
2. In the Windows XP - Software Updates section, click Windows Media Player , and then click Change/Remove.
5. In each of the two confirmation dialog boxes that appear, click OK.
6. When the rollback process is complete (it might take several minutes), click Restart.
7. Click Start, and then click Control Panel.
8. In the Category View of Control Panel, click Add or Remove Programs, and then click Remove a program.
9. Click Windows Media Format Runtime, and then click Remove.
If Windows Media Format Runtime is not displayed in the list of currently installed programs, then try the following:
. At the top of the list, select the Show updates check box.
2. In the Windows XP - Software Updates section, click Windows Media Format Runtime, and then click Change/Remove.
If you installed a non-US English version of Windows Media Player , the instructions in the dialog boxes that are mentioned in steps 9, 0, and might appear in English.
0. In the first confirmation dialog box that appears, click OK.
. In the second confirmation dialog box that appears, select the Do you want to continue with the rollback? check box, and then click OK.
2. When the rollback process is complete (it might take several minutes to complete), click Restart.
3. Click Start, and then click Control Panel.
4. In the Category View of Control Panel, click Add or Remove Programs, and then click Remove a program.
5. Click Microsoft User-Mode Driver Framework Feature Pack .0.0, and then click Remove.
6. Follow the instructions that appear in the Software Update Removal Wizard.
If the Wudf0000 confirmation dialog box appears, click Yes to continue. When the software removal process is complete (it might take several minutes to complete), click Finish.
If you are still having problems and all else fails, do a System Restore to before WMP was installed.
*Note: If you remove Windows Media Player and the Windows Media Format Runtime, and then encounter error C00D27D ("A problem has occurred in the Digital Rights Management component. Contact Microsoft product support, you might be able to resolve the problem by installing the Windows Media Format 9.5 Runtime. For information about installing the Runtime, in the Microsoft Knowledge Base, see article 8922, "Update for Windows Media Digital Rights Management-enabled players."
**You might not be able to roll back to a previous version of the Player if the hidden folder $NtUninstallwmp$ is deleted from your computer. Some non-Microsoft programs (such as CCleaner) delete this folder in an attempt to remove unwanted files from your computer.
More information here:
http://www.microsoft.com/windows/win...ionofthePlayer
Some people have found these instructions to be a solution to the "Player Not Connected" Error when trying to update the firmware. (Your mileage may vary)
Note to Mods: This would make a nice sticky

OK. I've been having this problem and have probably read every post there is on the net concerning it. But it doesn't seem to be only a Media Player problem. I was only running Media Player 0 when it happened to me. I found the solution somewhere, I can't remember where, but it worked for me and it was easy.
Here's what you do:
. Download BOTH ZenXtra_PCFW_LA__20_08.exe and enXtraP4SAudible_PCFW_LB_2_0_03.exe
2. Connect the Zen Xtra to your PC.
3. Run ZenXtra_PCFW_LA__20_08.exe. When the window comes up and says that your device is not connected DON'T do ANYTHING! Just leave it there.
4. Now run ZenXtraP4SAudible_PCFW_LB_2_0_03.exe
5. It told me that I already had this version on my device did I still want to load it's I said yes and it went through the whole upgrade and now it works fine.

2 problems, video drivers, and cpu underclocked a22m

hi, I have an a22m 2628-RSU, first off, whatever OS I install the cpu runs at 697mhz, the bios says it is an 850mhz (the cpu it self says 850/256 meaning 850mhz 256k cache) I even replaced the CPU with an identical one, and still 697mhz.
the bios has the cpu set to performance not battery life. I have the same problem with an a21m which is a 700mhz, but only runs at 547mhz.
problem 2, I have installed windows 7 RC (7100) everything works great except it does not like the video card, same happend with vista. It says drivers are installed, but I know they are not functioning. 3d screen savers like the 3d text which work flawlessly in windows xp, tell me that my video card does not support them, in both windows vista, and 7.
thank you in advanced for any help.
IBM Thinkpad a22m, 850mhz (697mhz) 512mb of ram, 120gb HDD, dual boot windows xp pro, and windows 7 RC (7100)
IBM Thinkpad a21m 700mhz (547mhz) 384mb 40gb, Windows XP

Welcome to the forum!
You have to push the machine pretty hard (open 10 Firefox windows and run Photoshop at the same time) to get the CPU to work at maximum speed. That is one of the ideas behind Intel's SpeedStep that your A22m has.
Graphic cards as old as yours are not supported by Vista or W7.
Hope this helps.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Problem updateing drivers

the my computer icon is messed up and it keeps changing back to just a file icon in the Dislpay properties-desktop tab custimize desktop, but the right icon is displayed on the desk top. I know when this happens cause the my documents folder is renamed from Boot's documents to My documents This wont let me have custom icons or keep my rename of the my documents folder. It seems to happen went I update the video drivers. this is the 4th time it has happened in the past I have created a new user and got rid of the old one but that is starting to get old. Any Idea's on what is happening or how to fix this.
Thank You

Go to:
http://www.driverheaven.net/cleaner/
to download Driver Cleaner. Run it then.
Go to: http://www.nvidia.com
to get the latest graphic card driver.

Anyone having problems updating Numbers and Pages on ipad2?

Since attempting a routine update via the appstore, 5 updates have failed including Numbers and Pages. When I try to repeat the update, it says it is in the middle of installing, but nothing is happening. At the moment I can't access vital spreadsheets and have no way of making the update work.
Any help would be appreciated!
I was on ios5 when the problem started but am now on ios6, still the same problem.

This is the iPad forum, are you in the right place?
Computer os has nothing to do with iPad apps.

Problem updating itunes and quicktime

i try to update my itunes/quicktime an error occurs that says that "The older version of QuickTime cannot be removed. Contact your technical support group." i tried deleting it many different ways and it will not work
any help would be greatly appreciated

Hi,
Have just cured my problem. I went delvinginto these archives and found a link (see below)
http://docs.info.apple.com/article.html?artnum=93976
I did all that - themost important bit is the bit about the Windows Installer Utility. This seemed to cure things for me. After following those instructions, I went into my "Add/Remove programs" control Panel utility and removed the extraneous Quicktime entry, which at last, finally removed itself (after doing the bit about the Windows Installer Utility) and then restarted the PC. After that, I installed the standalone Quicktime installer, which worked! Then I installed iTunes (which probably re-installed QT over the top of itself, but hey, what the **** - it worked!).
So I'm a happy bunny.
CHeers,
Sibrewer01

Problem updating drivers for soundblaster live value CT4

Hi all, I wonder if anyone can help me, i have a creative soundblaster li've value sound card model no. CT4780 it's about 4yrs old and i am trying to update the driver as the last one to go on it was in 2002. I have been trolling the creative website and downloaded the automatic update driver search but when it finishes it says i have the most current update for my card. I have had a look at the Li'veDrvUni-pack and being a bit of a novice to driver installing i was wondering if that one would be okay for me to download and install. Would appreciate any help.....

Hi Shrek
I just listed my first post. I bought a dell Dimension XPS T500 in 999. It used a CT4780 that fed a good Altec Lansing speaker system. When I built my present budget PC I used the old CT4780 card. Because I?am using XP Pro I loaded Li'veDri'veUni-Pack.exe driver (released 280203). This worked fine.
But I do not have the SPDIF working as yet. My MSI? MS-6533XG?Motherboard does have?header pins for SPDIF but?so far I haven't used them. I am looking for drivers to use if I can get the SPDIF connected.
Do you have any info?on my needs?
Thanks
Bailsburg

Problem updating Click2Call and Skype ... and reso...

I noticed, in my Application Event Log (Win7), the following errors:
Log Name: Application
Source: MsiInstaller
Date: 11/01/2013 18:15:10
Event ID: 11729
Task Category: None
Level: Information
Keywords: Classic
User: DOMAIN\user
Computer: machine.domain.local
Description:
Product: Skype Click to Call -- Configuration failed.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MsiInstaller" />
<EventID Qualifiers="0">11729</EventID>
<Level>4</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-11T07:15:10.000000000Z" />
<EventRecordID>287237</EventRecordID>
<Channel>Application</Channel>
<Computer>machine.domain.local</Computer>
<Security UserID="S-1-5-21-3026788693-2722709429-[removed for privacy]-1111" />
</System>
<EventData>
<Data>Product: Skype Click to Call -- Configuration failed.</Data>
<Data>(NULL)</Data>
<Data>(NULL)</Data>
<Data>(NULL)</Data>
<Data>(NULL)</Data>
<Data>(NULL)</Data>
<Data>
</Data>
<Binary>7B42364346323936372D433831452D343043302D393831352D4330353737344645463132307D</Binary>
</EventData>
</Event>
And this:
Log Name: Application
Source: MsiInstaller
Date: 11/01/2013 18:15:10
Event ID: 1035
Task Category: None
Level: Information
Keywords: Classic
User: DOMAIN\user
Computer: machine.domain.local
Description:
Windows Installer reconfigured the product. Product Name: Skype Click to Call. Product Version: 6.5.11422. Product Language: 1033. Manufacturer: Skype Technologies S.A.. Reconfiguration success or error status: 1625.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MsiInstaller" />
<EventID Qualifiers="0">1035</EventID>
<Level>4</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-11T07:15:10.000000000Z" />
<EventRecordID>287238</EventRecordID>
<Channel>Application</Channel>
<Computer>machine.domain.local</Computer>
<Security UserID="S-1-5-21-3026788693-2722709429-1111111111-1111" />
</System>
<EventData>
<Data>Skype Click to Call</Data>
<Data>6.5.11422</Data>
<Data>1033</Data>
<Data>1625</Data>
<Data>Skype Technologies S.A.</Data>
<Data>(NULL)</Data>
<Data>
</Data>
<Binary>7B42364346323936372D433831452D343043302D393831352D4330353737344645463132307D3030303039306163636265623338386265623432313132613465663065666639613763633030303030393034</Binary>
</EventData>
</Event>
From the last one, the MSI code 1625 should mean "This installation is forbidden by system policy. Contact your system administrator" ... this seemed odd to me, as I'm the admin. So I decided to manually run: C:\Users\[user]\AppData\Local\Temp\Low\MSI\SkypeToolbars.msi
This reported that it couldn't perform the install as there was a version already installed.
Sure enough, in "Programs and Features" was "Skype Click to Call. Version: 5.10.9560"
For some reason, the V6 installer couldn't update it... but never reported the correct reason
So I uninstalled the previous version and then ran the MSI again ... this time it requested the Chrome be closed (it was, but Chrome has a few background processes) ... it should know how to stop them. I killed the processes and then the install ran smoothly.
As my Google searches didn't explain this error or how to fix it, I thought I'd post it here.
Hope it helps someone
Another little oddity ... Skype was 6.0.126 (20MB), while Click2Call is 6.5.11422 (31M)
So I thought I'd do a Check for Updates ... this told me I had the latest version. But, being the sceptic that I am, I downloaded the full installer and now have 6.1.129
Obviously someone needs to work on their update code ...
Maybe someone can pass these points onto appropriate people at Skype/Microsoft?
Regards,
Mike Lazarus
http://about.me/GLComputing

Hi bleze,
Maybe you can try to use the svcutil.exe to help you create the proxy:
#Svcutil.exe:
http://msdn.microsoft.com/en-us/library/aa347733(v=vs.110).aspx .
Besides, it will be better if you can tell us what error do you meet when you update the service reference in the 64bit.
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Problem updating apps and buying on itunes on my iPhone 5

I cannot make purchases to itunes or update my apps. Why? I tried putting my iphone on the computer and lost all of my data and ended up need old updates redone. What can I do? I am afraid to put it on the computer again since I lost all my pictures because of it resetting. I do not recieve a error message, it just accept my password and go back to its orginal state. Same with my daughter;s phone we are on the same service.

I had this phone since December 2012 and I am very comfortable using this phone. The phone itself is not adhering to the request to update or make purchases.
So buying another type of device is not the solution but thank you anyway.

From OSX 10.8.5 to Mavericks problems updating, downloading and stoping on 1.01gb and not continuing

Trying to upgrade to Maverick from OSX 10.8.5 , downloading and stop at 1.01gb and does not continue. Tried a number of times and then fails to download?????????

Seems share by a couple of people. See https://discussions.apple.com/message/25571394#25571394.

When Sony will update drivers and software for VPCF23EFX to be compatible with win 10 ??

http://community.sony.com/t5/VAIO-Windows-10/Windows-10-upgrade-Information/m-p/513320#U513320 Which Windows version do you have?

Hi mohamed-algamal,
Welcome to Sony Community!
Thank you for showing interest in upgrading to Windows 8. In addition to what robertwycoff said we highly recommend that you also check out this link for more information about upgrading to Windows 10.
Regards,
Jen
If my post answers your question, please mark it as "Accept as Solution"

Dv7-6059eo, microphone and camera not working, have re-installed the system, updated drivers etc.

Hello. A couple of days ago, my microphone and camera suddenly stopped working. When I started up my camera in Skype, it said "Please open YouCam" or something like that, and when I did, it told me to update it. So I did. Then it told me that I had to uninstall the current version of YouCam. When I did and tried to install the update, it said something like "no video device detected".
After updating drivers and un-/installing things, I recovered my whole computer to fabric options. Still not working. So I suspect that it might have something to do with the hardware. Although I don't know what should have caused it, as it just happened randomly in the middle of the day.

Brad K59 wrote:... Photo Booth cannot recognize my built in Mac camera (ISight)...
iSight camera failure after OS X 10.9 Mavericks update
Brad K59 wrote:... I am missing the com.apple.photobooth.plist file ... how do I rebuild the file? ...
Try the User Tip suggestions first. Your system does need a plist, but a properly working OS X automatically generates any needed plist files when you launch the associated app (if its plist does not already exist.)

Most updated drivers

Hi guys,
Some time I found a thread where, among other things, someone made a summary of the most updated drivers and the wifi one, for example, was way more reliable, etc. I would swear that thread was on this forum, but I don't seem to be able to find it. They also mentioned drivers from lenovo, etc.
Could you please point me where that post is?
Also, is anyone experiencing problems when using wifi, keyboard and mouse (both bluetooth) at the same time? Some times my keyboard goes crazy and stops typing and after a couple of seconds it types all the keys I pressed. Sometimes it goes even crazier and fot "stop" I woulkd get a "stttttttttttttttttttttttttttttttop" or similar.
Thanks!

Hi UnoDosTres, welcome to the HP Forums. I understand that you are looking for a link to a page you once found with miscellaneous drivers. Also you are getting a keyboard delay when typing.
I have no idea where this link you are looking would be, but I can possibly provide a link to your products driver page. To obtain this information, and keyboard troubleshooting steps, I need more information about your system.
What is the model or product number? What version of Windows is installed?
Guide to finding your product number
Which Windows operating system am I running?
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

[GeForceFX] Problem updating drivers and playback probs

Similar Messages

Maybe you are looking for