[GeForceFX] PS FX 5200 Capture Issue - Still

"I am using NVIDIA FX5200 PERSONAL CINEMA V128 on WINDOWS 2000,
and i am getting the following error when i try to capture video
WinDVR
Overlay in not available
lower resolution, color depth &/or refresh rate
or enable video mirror if using twin view clone/extended mode
I have tried lowering everything but still get the error
What is overlay? ?("
I'm having this same issue. I've heard the included software is the cause (read below) and I replaced it with Ulead software and get the same error message.
My Box is an Intel P4 2.2 on an Intel 8x MB with 256 MB DDR using Windows 2000 Pro V5. Directx 9.0b.
I'm contacted MSI and they said to wipe clean the install and reinstall 6.1.7.7 drivers. Did that. No change, same error.
So before I recommend to the entire world not to buy MSI products, I'd like an actual solution. I see it works for other people.

I purposely didn't include my 3DMark03 results on account of how sorry they were!!!lol_anim:
The best score I could acheive was 1,517 3DMarks.
The fact that these benchmark game's framerates are so crappy is odd, since I can play most current games with nary a problem.
(except for the aforementioned Halo)
Medal of Honor, UT2003, Unreal II, Jedi Outcast, Splinter Cell, etc....
Oh well....
OOPS!!!!
**I was mistakenly benchmarking with 3DMark2001 (Build 200) before**
This was the reason for my score of 9,160 3DMarks.
Sorry for the bad info!
My 3DMark2001SE (Build 300) scores are as follows:
7,884 3DMarks - Stock CPU/FSB/RAM (133Mhz x 10.5)
8,666 3DMarks - Overclocked
BTW, thanks for the tip Jbaroli.
I can in fact increase all my overclocks, but I find that my current settings achieve the best balance of stability and video quality for me.
On the other hand I have a whole host of ideas for better cooling that should allow me to squeeze out some more performance!!!
AMD Athlon 1700+ (JIUHB o'cd to 2.1Ghz 183x11.5)
MSI KT3V (BIOS Tweaked to MAX!!!)
Corsair PC-2700 512MB (o'cd to 366Mhz)
MSI FX5200 TD128 (GPU o'cd to 286Mhz RAM o'cd to 542Mhz)
Western Digital 40GB 7200RPM 8MB
Lite-On 48x CD-RW
Antec 350W PSU
ThermalRight AX-7 Heatsink
ThermalTake SmartFan 2
Artic Silver Ceramique
Windows XP Home (Not completely tweaked for gaming, but some....)

Similar Messages

HV20/FCP6/FW Problems/Capture Issues/WTH?!?!?!?!?!

Hello everyone. I have a Canon HV20 that was working fine for a day or two while I was capturing both HDV and DV footage from MIni DV tapes. I opened the log and capture window after changing tapes and BAM! it said it couldn't find the deck.
At first, I set the app up just like the Apple site said, and everything worked perfectly, even when dumping DV footage. Cameras setting never changed from factory default. Now this, and what's worse is that my computer won't recognize the FW device. I do have a G-tech plugged in as well, and with no HV20 the computer recognizes it in the FW800 port, but as soon as I plug in the HV20 the computer doesn't recognize anything though the drive still operates.
I get this from FCP:
"Device is not connected or the capture preset is not setup correctly. You may still log offline clips.
This might also happen if you play DV footage in an HDV device."
I get this from System Profiler:
"FireWire Bus:
Warning: Unable to list FireWire devices.
Maximum Speed: Up to 800 Mb/sec"
If your advice is to purchase a new 17" MBP, I just might since i have had it with this POS right now.

Assuming the your FCP6 setup has not changed:
Canon cameras do not play well with other devices (hard drive for example) on the same FW bus. My son had capture issues with a Canon HV30 and G-Raid 2 on a 2007 Quad Mac Pro.
The work-around:
Capture to an internal drive and move the media to the external, switch scratch disk, and reconnect media. (not ideal).
The "fix":
Purchase a FW card for the MBP Express card slot and connect one of the FW devices to it. (Each device on different FW Buses.

24p advanced capture issue

hi, folks...
posing an old question that was never completely resolved because i've bumped up against it again.
here's the situation: i've shot and edited hours of footage at 24p advanced on a canon xl2. captured using 2:3:3:2 advanced pulldown removal without problems-- edited nicely into sequence.
but somewhere along the line something happened. now when i capture 24p footage and edit into the timeline i get motion blur every fourth frame (the pulldown frame?) the only way i can get a clean clip is if i capture 23.98 footage using the DV NTSC (30 fps) setting rather than 2:3:3:2 pulldown, then use the "advanced pulldown removal" feature from the tool bar after the fact (thanks patrick for this work-around).
so... situation is i can deal with this funky capture issue but it's an extra step and a pain in the rear-- anyone have any theories on how this happened and/or a permanent fix so i can shoot and capture the way fcp is supposed to work?
btw: checked the camera set-up again -- still 24p advanced, triple checked my fcp capture and sequence settings-- it's all at 2:3:3:2 pulldown removal and 23.98 as it should be. clip analysis on captured clips shows frame rate coming in at 23.98... as it should. couldn't find anything on topic in the search. appreciate thoughts. thanks much.

have you changed or downloaded anything at all that
might force the change in procedure, like a quicktime
update perchance, ipod update maybe???? just fishing
for a clue......
thanks, zeb... but no. i do remember the day things went haywire-- i captured footage off one of the reels and noticed two of five clips had captured at 29.97 instead of 23.98. it was puzzling but i went back through capture presets, sequence, etc and remember double checking and resetting all the pertinent settings before going back and recapturing the footage that had come in a 29.97. it then captured at 23.98-- but the every-fourth-frame motion blur issue cropped up at that point. and it's been happening ever since.
i know the fcp settings are correct -- i just don't get it.
fyi... i notice that as footage plays out through the firewire from the xl2, it looks fine in the camera viewfinder but i can see the motion issues on the log and capture window as it plays-- this is obvious even before initiating capture.

So many capturing issues...Can anyone help?

Hello fellow editors,
Over the past 2 weeks I have been struggling to fix my capturing issue. I have read the forums and have tried everything people have said about revlevant issues. So I ask for some help please.
I am editing on FCP 5 I use a Duel 2.0 G5 2.0 GB ram, I use 2 internal drives and 2 Lacies external. My deck is a JVC Mini DV/SVHS combo model number SR-VS30U.
So here are the issues either the deck fails to initilize or FCP sees the deck but the Preview is disabled and not allowing me to capture.
How do I fix this, I have been capturing often but just recently have started seeing all these issues.

So here are the issues either the deck fails to
initilize or FCP sees the deck but the Preview is
disabled and not allowing me to capture.
An obvious question: any adjustments - upgrades to Mac OS X, FCP, QuickTime 7 or alterations in hardware - in your system since your system decided to go AWOL on you?
Also, in terms of FireWire control, (not familiar with the exact model, so sorry if this isn't applicable) do you have device control but just not the ability to preview within the Log & Capture Window?
And do you have the ability to monitor externally? I've found that - in FCP 5 - if the deck is turned off for any reason - I shut it off once when a tape got jammed - the Log & Capture window will not be able to Preview but I was still able to Capture - and Batch Capture, at that - thanks to external monitoring.

Camera issue still exists in AIR 16 beta

Just tested my simple camera tester with Air 16 Beta and the issue still exists.
Im refering to the issue were the camera stops responding after a number of attaches/detaches to a video object and if attached multiple calls to setMode.
The issue im referring to is Bug#3850401 - Handle leak with video.attachCamera leading to inoperable camera

Just tested my simple camera tester with Air 16 Beta and the issue still exists.
Im refering to the issue were the camera stops responding after a number of attaches/detaches to a video object and if attached multiple calls to setMode.
The issue im referring to is Bug#3850401 - Handle leak with video.attachCamera leading to inoperable camera

When I capture a still frame froma video in Llightroom 4.3, where does the captured frame end up?

When I capture a still frame froma video in Llightroom 4.3, where does the captured frame end up? I cannot find it. Stan

It will be right next to the movie in your library and the jpg file will end up on your hard disk right next to the movie file. You can see the actual file by right (or control) clicking on the image in the library view and selecting "show in Finder/Explorer"

"I did fresh restore, reset all setting and reboot the issue still there. I hope Apple don't forget us to solve this issue soon

"I did fresh restore, reset all setting and reboot the issue still there. I hope Apple don't forget us to solve this issue soon

Oh I've found it meanwhile! The is a 2nd post! So never mind this one! I think lawyerhusain understood he has to let Apple know, if he wants them to know and the technical thing will continue with the 2nd post!

Can I capture a still image from a quicktime movie?

Can I capture a still image from a quicktime movie?

Yes. But how you do it depends on your version of quicktime.
If you have the pro version, you can easily use the "Export" option to output the video as a series of images.
For the basic version of quicktime, or if you want to quickly take make a still image of a single frame, you could just use the "Grab" application in OSX to take a screen shot.
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh364.html

I want to resolve the payment issue still pending .But I do not understand what issue remains to be resolved by me ? Unless I know the details of it how shall I resolve it

I want to resolve the payment issue still pending .But I don't know what issue remains to be resolved by me? Unless I know the details of the issue how shall I resolve it

Apple is not here. Apple does not answer questions here. This is a user to user tech support forum, no ne here would have any knowledge of your personal account details or a financial dispute that you may have with Apple.
Mac App Store Support -
http://www.apple.com/support/mac/app-store/
iTunes Support -
http://www.apple.com/support/itunes/

Firefox continues to have"Not Reponding" issues. Upadated all plug-ins and disables most of them but issue still occurs, often.

Firefox continues to have"Not Responding" issues. Updated all plug-ins and disabled most of them but issue still occurs, OFTEN.

Thank you for your reply,
I know that plugins aren't being outright disabled and that people need to be encouraged to keep up to date, it's just that there's a lopsided amount of focus on them as a security vector from Mozilla.
I must point out however, that javascript security at the moment seems to consist of an on-off switch on almost every browser in existence: there is no obvious way to set "I don't want that site to know where my mouse is for my privacy", "I don't want that site to dynamically load content because it slows my browser" or the sort.
While there is CAPS ( http://www.mozilla.org/projects/security/components/ConfigPolicy.html ) it is not configurable from within the browser (and its existence at all is obfuscated) and considering a lot of javascript is obfuscated to discourage run-time modification (say using web development toolbars) or discourage CAPS usage, there's little way to know what exactly to use CAPS on without reverse engineering. The average user would not be able to do this.
Javascript security needs to be more, much more than an on/off switch.

How do I capture good stills from video on Photoshop Elements 8?

I'm using Photoshop Elements 8. When I try to capture still photos from video clips, the results are not very satisfactory. Usually the stills are very unclear, not sharp like I want them to be. I have to make many attempts to capture a still before I can get one that's halfway clear.   Does it have to be this way?   What can I do to get consistently clear stills from video? Thank you!

Fair enough, Barbara. Thanks!
Lewis B.
Date: Wed, 30 Oct 2013 18:08:37 -0700
From: [email protected]
To: [email protected]
Subject: How do I capture good stills from video on Photoshop Elements 8?
    Re: How do I capture good stills from video on Photoshop Elements 8?
    created by Barbara B. in Photoshop Elements - View the full discussion
Frame from Video is more or less a legacy feature in PSE 8. It was meant to capture a frame or two from a short homemade video at a low resolution. It doesn't do HD video at all, and isn't meant for a clip that's more than a minute or so in length. It's been dropped from the latest version because nobody has those kinds of movies anymore.
So the bottom line is you're better off doing this with some other program than with PSE.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5802253#5802253
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5802253#5802253
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5802253#5802253. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Photoshop Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How do I capture a still photo off of a dvd. I am on a MacBook OX6.

How do I capture a still photo from a DVD? I am on a MacBook OX6. I have tried downloading DVD Snap2 and VLC but I am not sure what to do with that once I have it. Trying to put together a scrapbook for my son and I only have DVD of an occassion.

Pause the playback and take a screenshot.

How do I capture a still photo from my video footage??

Probably easy I know, but just wondering how to capture a still photo from my video footage. I pulled a particular clip into my viewer window and have found the still shot I want, what next??
Thanks in advance for any help.
Cheers,
Bill
Boulder

Put the playhead over the frame in the timeline and choose Modify>Make Freeze Frame. It will appear in the Viewer window. Drag it into the timeline.
If you want a photo for iPhoto etc. put the playhead over the frame and select File>Export>Using QuickTime Conversion.
In the window that opens change the "Format" setting to Still Image from the dropdown menu.

Macam or Parian cause capture issues???

Hello all - I've been having capture issues with my HDV stuff (Crashes during capture - I posted the details under 'Crash under HDV log and Capture' if anyone can help me out with that issue and this is slightly related...
People elsewhere say that Macam or Parian can affect Final Cut - any experiences with that? any other programs that I should avoid that could negatively affect my fcp performance?
Thanks!
- John

I'm using FCP7 on Snow Leopard.
Any idea as to what could cause fcp to crash during capture (HDV to ProRes) if it's worked more then a dozen times prior??? Any other programs could affect such things? Nothing has been installed or changed on my system in over a month.

How do you capture a still picture from DVD

How do you capture a still picture from a DVD

Click iMovie/About. If you have version 9.0.4 (iMovie 11) this will work. If you have an earlier version, this will also work, but there are also other ways.
First, get an app called MPEG Streamclip, which is free. (MPEG Streamclip from Squared 5)
Open MPEG Streamclip.
In iMovie, select the clip you need. Then, right-click/Reveal in Finder.
Drag this clip into MPEG Streamclip
In MPEG Streamclip, move the playhead to the frame you want.
In MPEG Streamclip, click FILE/EXPORT FRAME.
Choose JPEG, TIFF, or PNG and give it a name.
You can then drag this photo into iPhoto.
I have created a short video Tutorial on how to do this. There is one error in the Tutorial, where it says that Command-click is the same as right-click. I should have said Control-click instead.

[GeForceFX] PS FX 5200 Capture Issue - Still

Similar Messages

Maybe you are looking for