General Approval Process in SSHR

HI all
We are trying to get One way Approval process .That's when an applies or changes in personal forms ,Then it has to go it immediate manager.How to do this ? I need to know how to get this proceess to be done? If we need to use AME,what are basic steps to achieve this. Any suggestions are greatly appreciated.
Cheers
Kumar cs

Hi Kumar
You can set up AME Rules for standard Oracle Self Service Human Resources Transaction Type.
Go to AME Administrator => Approvals
Select Transaction Type => Oracle SSHR
Then create conditions on which you want to initiate your approval process. Base condition will be like your workflow process name and then you can go ahead and add different conditions in different scenarios.
Once you have defined the conditions define the group of persons you want to send the notification for approval or FYI.
and then create the rules by selected conditions and groups.
For detailed configuration you can go through the AME Developer guide at following link.
http://download.oracle.com/docs/cd/B40089_09/current/acrobat/120ameig.pdf
Hope this helps
Gaurav

Similar Messages

Approval Process in SSHR using Approval Management

Could any one suggest for the below mentioned issue ?
I have set up the approval process using approval management. But when I tried to test the approval process in both the ways ('Create a test transaction' and 'View a real transaction's approval process), I am receiving different error messages.
1. if I test by using 'View a real transaction's approval process'
receiving the error message saying "ORA-20001: The attribute TRANSACTION_REQUESTOR_PERSON_ID probably has an invalid query string. The attribute caused the following exception:
-972
ORA-00972: identifier is too long"
2. if I test by using 'create a test creation' receiving error message as "ORA-20001: Casey Browning (Browning, Doctor Casey) lacks a supervisor, so OAM cannot complete the chain of authority for the transaction"
What am i missing in the setups ?
which way is the recommended way to test the process ?
Your response is more appreciated.
Regards
Jhansi

For you to test Approvals, you have to setup a number of things;
1. Supervisor Hierarchy (If using that as hierarchy)
2. Job Levels (If using Job-level approvals)
3. New rules for SSHR functions.
The getApprStartingPointPersonId function returns the starting point person ID for the transaction in the HR_API_TRANSACTIONS table. It uses that to traverse the supervisor hierarchy based on the approval.
Hope this helps.

Customize approval process on AP payment cancellation

Dear all,
Is there any one ever add an approval process to the AP payment cancellation function? Could anyone pls share how you can achieve the customization? Our user requirement is there should be an approver to review the selected payment records for cancellation.
HY

Hi,
I feel there is one workaround for this issue, but evaluate this as per your requirement.
Enable Journal approval for Receivables Journal Source and periodically post the Journal entries of Receivables to General Ledger.
Ask the approver to approve the receipts in General Ledger. (Using drilldown functionality if required).
If there is any mistake the approver can always ask for reversal of Original receipt and direct the user to enter new one.
Only drawback is Sales Invoices should also be approved. These should be approved blindly.
Regards,
Sridhar

Adding approver and reviewer to PO approval process

hi,
We have PO approval process. In EBP there are two buttons called Add approver and Add reviewer which are currently grayed out. How these buttons can be activated? If we go the graphical log of PO approval workflow, we can see add reviewer button in the log and reviewer can be added to workflow from graphical log screen.
Thanks and Regards,
Vithalprasad

Hi,
Can you please change the agent assignment of the PO workflow so that it is a 'general' task. Go to transaction PFTC, display 'workflow template' e.g. 14000075 (i.e. without the WS)
Go to 'Additional Data' -> 'Agent Assignment' -> 'Maintain' ->
Attributes -> Select Radio button 'General Task' -> Transfer -> Save.
Then retest.
Kind regards,
Siobhan

3rd Party Applications approval process

I am not sure what the true approval process is. I don't know that there's many out there that care what the actual steps are. What I believe myself, and many others are wondering is; why there are so many awaiting approval?? This is what is burning me on this product. I believe this is what will burn many developers on this product. Sure there are some die hards that will stick with it. Sure there are Corporations that will stick with it because someone in their IT department (much like I have done) said that RIM's products are the only approved devices at this time.
As one example that is just shocking to me and making me rethink developing any applications for any of RIMs products and even continuing to use RIM's products in my business, I will point to AiFlex (developers of aVNC and aMail). Their aMail application has been waiting for over a month to be approved. This is just flat unacceptable to me as someone that views the IT department as a group of people that makes the business as a whole more reliable and nimble. I can't continue to remain nimble when I have a primary hardware product that is slowing me down.
I have executives that want this type of device. I won't approve it for them because I can't use RDP to connect to my servers and published applications. I don't expect these types of devices to be laptops. For tasks that require additional computing power or more open OS platforms I expect to be able to connect to a server to complete that task. To my knowledge none of the tablet manufacturers have RDP as a native application. I don't expect it to be. However, I expect a developer to have the ability to make an app and have it available to the general public. This is the point of failure.
I understand that native email is coming, but for those companies that would like something now, why have email applications been held back?
Finally I leave this post with this one question, What other apps are there out there that we don't know about that are waiting in the dungeons of RIM's approval process?

The real problem is that the PB is locked down. Development needs to be fully open as it is on most Android devices. There's no reason that applications need to be "approved" by someone at RIM before they can be installed on the device. Sure, keep the store a walled garden if that's what RIM wants, but open the device.
Wonderful hardware. Sucky development model.

Developing Balckberry Approval process using WAPI's

Hi All,
I'm very new to world of workflow handling.
I have a requirement in Blackberry Approval process.
One of our client is currently using SAP Workflowto send PR items via Outlook to the approver of these PRs. The approver then gets an email which contains a link to the Portal where he/she approves or rejects the PR.
Now, along with the email to the approver, the approver should also get the PRs on his/her Blackberry and should be able to approve or reject the PRs from the Blackberry Device itself.
The UIs for blackberry haveto be developed using webdynpro for Java.
I need to know how do I link the blackberry webdynpro application to workflow?
How do I get the WorkItems to the blackberry device?
I would be grateful if anybody could guide me in this. Overview of steps to be followed is also welcome, I'll explore on the individual steps.
Thanks and regards.
Romi Malik
Edited by: romi malik on Oct 14, 2008 11:40 AM

For you to test Approvals, you have to setup a number of things;
1. Supervisor Hierarchy (If using that as hierarchy)
2. Job Levels (If using Job-level approvals)
3. New rules for SSHR functions.
The getApprStartingPointPersonId function returns the starting point person ID for the transaction in the HR_API_TRANSACTIONS table. It uses that to traverse the supervisor hierarchy based on the approval.
Hope this helps.

Approval Process for Purchasing in 2007 A does not work

I setup an approval process so all Purchase Orders would require approval. When a PO is entered, the Approval Process does not kick in, and the PO is instantly available without approval. I have built approval processes before, it's active and looks fine. Any suggestions?
Thanks!
Mike White
Level Eight Systems

Ok, I am an idiot. I found the problem. I hadent turned on Approval Proceudres in the General Settings, Business Partner Tab! Doooooh

Approved invoices can not be edited - Approval process

Hi Experts -
I have recently raised an incident with SAP about Approval process - the complete message and support reply is as follows - but i believe we need a change in the approval process - if the approval required is only one but you have defined two people (Either or OR) in the approver list - the system should allow the document to be edited if one of the approvers reject it.
please let me know and i believe we need a change in design - unless otherwise a solid reason is given to justify the existing design
10.07.2009 10:32 Description (English) by SRS Manian
     We have created approval procedure for all the invoices which are entered into the system., The
'Accts' user enters the invoice into the system - the invoice comes for approval to 'Manager' user.
When the Manager opens the invoice via Alert window - he/she wants to modify certain information
(lines as well as Sales person) and approve it.
The invoice which gets opened from the alert window - does not allow the user 'Manager' to modify at
all. All the information on the invoice are greyed out.
The system should allow the user 'Manager' to modify the information. Since the manager has full
authorization to the system.
10.07.2009 10:35 Info to Reporter by SAP
     Dear Partner/Customer,
We have received your inquiry and are currently processing it.
You will be contacted with a solution or an update as soon as possible.
For further details regarding the phase your message is in at the
moment please refer to:
http://service.sap.com/%7Esapidb/011000358700000575782007E
Kind regards,
SAP Business One Product Support
10.07.2009 10:59 Reply to Reporter by SAP
     Dear Manian,
Thank you for contacting us.
When the originator sends the document for manager's approval, note that the at that stage, the document is still in the 'Approval Process'. This is because the system is waiting for the 'Manager' to 'Approve or Reject' the document. Hence, looking at the Document, it is still in 'Draft - Pending' Status.
When the document is in 'Draft-Pending' Status, the document is not available for editing, because the system considers that it is still in the waiting process. In your case, the manager cannot edit t he document.
To amend the document, an action is required from the approver either to reject it first. Once rejected, it can be amended and re-sent for approval.
I have checked our knowledge base and noted that there is an article which describes the approval process. Please refer to the Expert on Phone Wiki Article (March 2009) with title: Why a draft documen t in an approval process cannot be modified by the originator?
The link will provide the explanation:
https://www.sdn.sap.com/irj/scn/wiki?path=/pages/viewpage.action&pageid=88735894
I have also attached Notes 1321234 and 1111431 for your reference.
Best regards,
Lorna Real
Support Consultant
Product Support for SAP Business One
SAP Ireland
10.07.2009 11:59 Reply to Support Center by SRS Manian
     Thanks for the reply. The scenario is when the Manager receives the
document for approval, he wanted to edit and add it. Your reply (and
documentations) states that it needs to be rejected first before it is
available for editing. When it is gets rejected - the person who
orignated the document gets an alert and he can edit it. Here the
Manager must get an alert so that he can edit the Rejected document.
When the 'manager' rejects the document, and goes back to the alert
window to open the document - it is still greyed out !!
How does the 'manager' reject the document and edits it ?
regards
Manian
10.07.2009 12:11 Reply to Reporter by SAP
     Dear Manian,
If after the Manager rejects it and still the document is not editable (greyed out), it means that the document may still be in the 'Approval Process'. When it is greyed out, what is the status of the document in the header? Does it say 'Rejected' or 'Pending'?
If it is still in 'Pending' mode, please verify the number of 'Approvers' set in the 'Stages' tab of the 'Approval Template - Setup' window. If there is more than one user listed as 'Approver', and o nly 1 approval is required, the system provides an opportunity to other 'Approvers' to approve or reject the document. If in your case, the number of approvers is 2, and manager 'rejected' it, the sys tem still keeps the document in Pending status as it waits for another approver's decision to reject or approve it.
Also, verify the number of 'Approvals' required. If the number of 'Approvers' who have not rendered their decision is greater than or equal to the 'Approvals' required (e.g. approvers - 2, required ap provals - 2) the system keeps the document within the approval process. This is to allow the other 'Approvers' to decide on the document.
I hope this clarifies the behaviour. If you can provide us a step by step screenshot of the issue, this may help us to provide a more accurate response.
Best regards,
Lorna Real
Support Consultant
Product Support for SAP Business One
SAP Ireland
10.07.2009 12:28 Reply to Support Center by SRS Manian
     Hi:
The status of the document in the Header says 'Pending' and the status
below the document number says 'Suspended' - it is not showing as 'Draft'
Regards
Manian
10.07.2009 12:42 Call to Customer / Partner by SAP
     Performed on: 10.07.2009 10:41:59 (UK)
Contact person: SRS Manian
Status of discussion: Customer not reached
Subject:
Called the partner but currently engaged on another line.
Would like to hold a webex.
10.07.2009 12:42 Reply to Reporter by SAP
     Dear Manian,
I'm trying to call you but there was no response on your mobile.
When the header says 'Pending', then it means the document is still within the approval process. Please check the Approval Template and see the number of approvers and the number of approvals require d.
The number of approvals and approvers may be greater than 1. In this case, the system waits for other approvers to approve or reject the document. Once all the approvers have rejected the document, th en the document will be released and available for editing.
Best regards,
Lorna Real
Support Consultant
Product Support for SAP Business One
SAP Ireland
10.07.2009 18:11 Reply to Support Center by SRS Manian
     Hi:
Thanks for the reply - i tried this and found out the following:
1 - In the approval templates - we had mentioned number of approvals
required as '1'.
2 - in the number of approvers - we had mentioned two users
Though the template requires only one approvals (Either or OR) the system
expects both of them to approve or reject -
Can u please let me why is this behaving like this - or is this is the
way it is designed ? - if this is the way it is designed - i beleive it
is wrong - weneed to give a solution to the customer
regards
Manian
11.07.2009 05:52 Reply to Reporter by SAP
     Dear Manian,
Thank you for the information. The behaviour is a current system definition documented as per Note 1321234. I have attached the said Note for your reference. When only 1 approval is required and there are 2 or more persons are allowed to approve the document, the document does not get automatically rejected when 1 person 'rejects' it. The system waits for other approvers to render their decision b ecause a person may still approve or reject the document.
The design is not an application error. If you would like to change this design, please post your requirement in our SAP Business One Product Development Collaboration
forum. You can find the forum in this link:
/community [original link is broken]
The forum is beingmoderated by members of the Solution Management team specialized in certain areas, according to the folder you are in. Partners can impact the design of specific features by posting suggestions and feedback at this forum. Kindly refer to Note 1028874 which describes more on the above process.
As the request will be handled through another process, we kindly request that this support message be closed.
Thank you for your understanding.
Best regards,
Lorna Real
Support Consultant
SAP Product Support for SAP Business One
SAP Ireland
11.07.2009 09:02 Reply to Support Center by SRS Manian
     Hi Thanks for the reply - however, the solution given doesnot address the
problem we are beingfaced with our client
Is there a Development Request we can raise so that this problem is
addressed in future
I am going ahead and confirming this Message though
regards
Manian
11.07.2009 10:04 Reply to Reporter by SAP
     Dear Manian,
Thanks for the information. I understand the customer's requirement. As previously mentioned, please log a development request in this link:
/community [original link is broken] This is from Note 1028874.
Unfortunately,we at the support centre does not have access to the list of development requests. Hence, kindly follow the process in Note 1028874.
I'm sending the message back to your side for confirmation.
Best regards,
Lorna Real
Support Consultant
Product Support for SAP Business One
SAP Ireland
SAP Notes
Number     Short text
0001035200
Issue can be solved via existing documentation
0001111431
Deleting rejected draft documents.
0001167635
Maintenance Policy (L)
0001321234
Status of a document rejected within the Approval Process.

Hi Gordon - thanks for the reply - i am sorry i never realized that the message i raised could be messed up like this - the following is a clear message with some paragraphs:
Hi Experts - I have recently raised an incident with SAP about Approval process - the complete message and support reply is as follows - but i believe we need a change in the approval process - if the approval required is only one but you have defined two people (Either or OR) in the approver list - the system should allow the document to be edited if one of the approvers reject it. please let me know and i believe we need a change in design - unless otherwise a solid reason is given to justify the existing design
SRS Manian We have created approval procedure for all the invoices which are entered into the system., The 'Accts' user enters the invoice into the system - the invoice comes for approval to 'Manager' user. When the Manager opens the invoice via Alert window - he/she wants to modify certain information (lines as well as Sales person) and approve it. The invoice which gets opened from the alert window - does not allow the user 'Manager' to modify at all. All the information on the invoice are greyed out. The system should allow the user 'Manager' to modify the information. Since the manager has full authorization to the system.
Reply to Reporter by SAP Dear Manian,
Thank you for contacting us. When the originator sends the document for manager's approval, note that the at that stage, the document is still in the 'Approval Process'. This is because the system is waiting for the 'Manager' to 'Approve or Reject' the document. Hence, looking at the Document, it is still in 'Draft - Pending' Status. When the document is in 'Draft-Pending' Status, the document is not available for editing, because the system considers that it is still in the waiting process. In your case, the manager cannot edit t he document. To amend the document, an action is required from the approver either to reject it first. Once rejected, it can be amended and re-sent for approval. I have checked our knowledge base and noted that there is an article which describes the approval process. Please refer to the Expert on Phone Wiki Article (March 2009) with title: Why a draft documen t in an approval process cannot be modified by the originator? The link will provide the explanation:
https://www.sdn.sap.com/irj/scn/wiki?path=/pages/viewpage.action&pageid=88735894
I have also attached Notes 1321234 and 1111431 for your reference. Best regards, Lorna Real Support Consultant Product Support for SAP Business One SAP Ireland 10.07.2009 11:59
Reply to Support Center by SRS Manian
Thanks for the reply.
The scenario is when the Manager receives the document for approval, he wanted to edit and add it. Your reply (and documentations) states that it needs to be rejected first before it is available for editing. When it is gets rejected - the person who orignated the document gets an alert and he can edit it. Here the Manager must get an alert so that he can edit the Rejected document. When the 'manager' rejects the document, and goes back to the alert window to open the document - it is still greyed out !! How does the 'manager' reject the document and edits it ? regards Manian
Reply to Reporter by SAP
Dear Manian, If after the Manager rejects it and still the document is not editable (greyed out), it means that the document may still be in the 'Approval Process'. When it is greyed out, what is the status of the document in the header? Does it say 'Rejected' or 'Pending'? If it is still in 'Pending' mode, please verify the number of 'Approvers' set in the 'Stages' tab of the 'Approval Template - Setup' window. If there is more than one user listed as 'Approver', and o nly 1 approval is required, the system provides an opportunity to other 'Approvers' to approve or reject the document. If in your case, the number of approvers is 2, and manager 'rejected' it, the sys tem still keeps the document in Pending status as it waits for another approver's decision to reject or approve it. Also, verify the number of 'Approvals' required. If the number of 'Approvers' who have not rendered their decision is greater than or equal to the 'Approvals' required (e.g. approvers - 2, required ap provals - 2) the system keeps the document within the approval process. This is to allow the other 'Approvers' to decide on the document. I hope this clarifies the behaviour. If you can provide us a step by step screenshot of the issue, this may help us to provide a more accurate response.
Best regards,
Lorna Real Support Consultant Product Support for SAP Business One SAP Ireland
Reply to Support Center by SRS Manian
Hi: The status of the document in the Header says 'Pending' and the status below the document number says 'Suspended' - it is not showing as 'Draft'
Regards
Manian 10.07.2009 12:42
Reply to Reporter by SAP
Dear Manian,
I'm trying to call you but there was no response on your mobile. When the header says 'Pending', then it means the document is still within the approval process. Please check the Approval Template and see the number of approvers and the number of approvals require d. The number of approvals and approvers may be greater than 1. In this case, the system waits for other approvers to approve or reject the document. Once all the approvers have rejected the document, th en the document will be released and available for editing.
Best regards,
Lorna Real Support Consultant Product Support for SAP Business One SAP Ireland
Reply to Support Center by SRS Manian
Hi: Thanks for the reply - i tried this and found out the following: 1 - In the approval templates - we had mentioned number of approvals required as '1'. 2 - in the number of approvers - we had mentioned two users Though the template requires only one approvals (Either or OR) the system expects both of them to approve or reject - Can u please let me why is this behaving like this - or is this is the way it is designed ? - if this is the way it is designed - i beleive it is wrong - weneed to give a solution to the customer
regards
Manian
Reply to Reporter by SAP
Dear Manian,
Thank you for the information. The behaviour is a current system definition documented as per Note 1321234. I have attached the said Note for your reference. When only 1 approval is required and there are 2 or more persons are allowed to approve the document, the document does not get automatically rejected when 1 person 'rejects' it. The system waits for other approvers to render their decision because a person may still approve or reject the document.
The design is not an application error. If you would like to change this design, please post your requirement in our SAP Business One Product Development Collaboration forum.
You can find the forum in this link:
/community [original link is broken]
The forum is being moderated by members of the Solution Management team specialized in certain areas, according to the folder you are in. Partners can impact the design of specific features by posting suggestions and feedback at this forum.
Kindly refer to Note 1028874 which describes more on the above process.
As the request will be handled through another process, we kindly request that this support message be closed. Thank you for your understanding.
Best regards,
Lorna Real Support Consultant SAP Product Support for SAP Business One SAP Ireland
Reply to Support Center by SRS Manian
Hi Thanks for the reply - however, the solution given does not address the problem we are being faced with our client Is there a Development Request we can raise so that this problem is addressed in future I am going ahead and confirming this Message though
regards
Manian
Reply to Reporter by SAP Dear Manian,
Thanks for the information. I understand the customer's requirement. As previously mentioned, please log a development request in this link:
/community [original link is broken]
This is from Note 1028874.
Unfortunately, we at the support centre does not have access to the list of development requests. Hence, kindly follow the process in Note 1028874. I'm sending the message back to your side for confirmation.
Best regards,
Lorna Real Support Consultant Product Support for SAP Business One SAP Ireland

Approval process (Release strategy of scheduling agreement)

Hi,
Recently we are trying to implement the approval process of scheduling agreements.
Client requirement is when ever there is a change in price irrespective of the following
1. Retrospective price change in any line item
2. Current price change in any line item
3. Future price updation in SA in any line item
4. New addition of line item
the system should trigger the release process (i.e. Approval process).
Our idea is to design the approval process based on document type and net value of SA. Based on which trigger should happened. But when we test it we find the following issues.
1. Trigger is not happening for future date price change or price for new period as the net value of SA is based on validity time.
Becuase the net value change will happen only on that onwards..
Also we are not using any cumulative pallned values in agreements.
Any can suggest the best solution to over come this..or Any user exit is avaliable to handle this issue.
regards,
K.Sundaresan.

Below are the (changed) item fields :
Purchasing Document Item Change Date AEDAT
Item Delivery Date EINDT
Schedule Line is "Fixed "FIXKZ
Below are the (changed) header fields :
Release Indicator: Purchasing Document FRGKE
Release status FRGZU
Purchasing document processing state PROCSTAT
Item and header changes have same "Change document number " and transaction code "ME38" , this happened only in some cases,Rel Strategy is on document type level ,I am also confused on this .
Please assist on this

MM Approval Process and email notifications

Hello All,
I am looking for a concrete answer to the following MM/ workflow questions?
1. My Client wants approval process flow: purchaser to Line manager to Head of department to Finance to Material owner.
Is this a 'z' table and development is required to acheive this. Can we do the above process thought the classification system? Please give me more details.
2. How can the client get approval process notifications in email? Again, is this a development? Please give me details.

Hi,
1. My Client wants approval process flow: purchaser to Line manager to Head of department to Finance to Material owner.
Is this a 'z' table and development is required to acheive this. Can we do the above process thought the classification system? Please give me more details.
This requirement will be fillfilled by PO Release procedure provided by SAP..
This is pure configuration.
2. How can the client get approval process notifications in email? Again, is this a development? Please give me details.
For this you have to setup Workflow...Consult with your Workflow Consultant.
Utsav

How to use a pwa group in CREATE A TASK PROCESS in SPD 2013 for project server workflow approval process

I am working on a Project Server 2013 workflow. I am creating this using Sharepoint Designer 2013. In this workflow I am using approval process at one stage. I have created a security group SalesManagers in PWA. I want to use this group for workflow approval
process. I want all users of this group get approval tasks.
For this I used START A TASK PROCESS activity in the SP Designer. I clicked on
this user and created task process. But here I could not find SalesManager group which I created in PWA. I was only able to find the users. I can also see
Administrators for PWA . But couldnot find SalesManager or any other security group created in pwa.
Can anyone suggest how I can get the security group created in pwa.

NBDevelopment,
I believe SPD only recognizes the SharePoint Groups and not the project server security groups.
The Administrators for PWA, and few other groups like Project Managers for PWA etc., are synced SharePoint Groups with the security groups, which is why they show up in SPD.
You could create a SharePoint Group for the Sales Managers group and use that in SPD.
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:

OIM: Error while deploying Custom Approval Process for Self-Register

While deploying the Custom Approval Process for Self-Register, i am getting the following error in scac.log file
Nov 16, 2011 2:48:58 PM oracle.fabric.common.wsdl.SchemaManager isIncrementalBuildSupported
INFO: XMLSchema incremental build enabled.
Nov 16, 2011 2:48:58 PM com.collaxa.cube.CubeLogger info
INFO: validating "ApprovalProcess.bpel" ...
oracle.jrf.UnknownPlatformException: JRF is unable to determine the current application server platform.
     at oracle.jrf.ServerPlatformSupportFactory.getInstance(ServerPlatformSupportFactory.java:79)
     at oracle.integration.platform.blocks.WLSPlatformConfigurationProvider.<clinit>(WLSPlatformConfigurationProvider.java:44)
     at oracle.integration.platform.blocks.FabricConfigManager.<clinit>(FabricConfigManager.java:155)
     at oracle.integration.platform.blocks.xpath.FabricXPathFunctionResolver.loadXpathFunctions(FabricXPathFunctionResolver.java:271)
     at oracle.integration.platform.blocks.xpath.FabricXPathFunctionResolver.loadXPathConfigFile(FabricXPathFunctionResolver.java:153)
     at oracle.integration.platform.blocks.xpath.FabricXPathFunctionResolver.init(FabricXPathFunctionResolver.java:51)
     at com.collaxa.cube.xml.xpath.BPELXPathFunctionNameResolver.loadFabricXpathFunctions(BPELXPathFunctionNameResolver.java:57)
     at com.collaxa.cube.xml.xpath.BPELXPathFunctionNameResolver.<init>(BPELXPathFunctionNameResolver.java:48)
     at com.collaxa.cube.xml.xpath.BPELXPathFunctionNameResolver.<clinit>(BPELXPathFunctionNameResolver.java:44)
     at com.collaxa.cube.lang.compiler.bpel.XPathExprValidatorVisitor.<init>(XPathExprValidatorVisitor.java:122)
     at com.collaxa.cube.lang.compiler.bpel.AssignValidator.<init>(AssignValidator.java:89)
     at com.collaxa.cube.lang.compiler.bpel.BpelParser.<init>(BpelParser.java:452)
     at com.collaxa.cube.lang.compiler.bpel.BPELValidator.validate(BPELValidator.java:60)
     at com.collaxa.cube.lang.compiler.BPEL1Processor.validate(BPEL1Processor.java:329)
     at com.collaxa.cube.lang.compiler.BPEL1Processor.process(BPEL1Processor.java:153)
     at com.collaxa.cube.lang.compiler.CubeParserHelper.compile(CubeParserHelper.java:47)
     at oracle.fabric.bpel.bpelc.BPELComponentValidator.validate(BPELComponentValidator.java:40)
     at oracle.soa.scac.ValidateComposite.validateComponentTypeServicesReferences(ValidateComposite.java:1117)
     at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:500)
     at oracle.soa.scac.ValidateComposite.run(ValidateComposite.java:150)
     at oracle.soa.scac.ValidateComposite.main(ValidateComposite.java:135)
Nov 16, 2011 2:49:00 PM CubeProcessGenerator compile
WARNING: classpath is: D:\JDev11g\Middleware\jdeveloper\jdev\extensions\oracle.sca.modeler.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\fabric-runtime.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.mgmt_11.1.1\soa-infra-mgmt.jar;D:\JDev11g\Middleware\oracle_common\modules\oracle.fabriccommon_11.1.1\fabric-common.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\orabpel.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.mediator_11.1.1\mediator_client.jar;D:\JDev11g\Middleware\oracle_common\modules\oracle.mds_11.1.1\mdsrt.jar;D:\OIMPS1\Middleware\oracle_common\modules\oracle.jps_11.1.1\jps-manifest.jar;;D:\OIMPS1\Middleware\Oracle_IDM1\server\workflows\new-workflow\process-template\SelfRegistrationApprovalApp\SelfRegistrationApproval\SCA-INF\classes;D:\OIMPS1\Middleware\Oracle_IDM1\server\workflows\new-workflow\process-template\SelfRegistrationApprovalApp\SelfRegistrationApproval\SCA-INF\classes;D:\OIMPS1\Middleware\Oracle_IDM1\server\workflows\new-workflow\process-template\SelfRegistrationApprovalApp\SelfRegistrationApproval\SCA-INF\gen-classes;D:\OIMPS1\Middleware\Oracle_IDM1\server\workflows\new-workflow\process-template\SelfRegistrationApprovalApp\SelfRegistrationApproval\SCA-INF\lib\oimclient.jar;D:\JDev11g\Middleware\oracle_common\modules\commonj.sdo_2.1.0.jar;D:\JDev11g\Middleware\oracle_common\modules\oracle.fabriccommon_11.1.1\fabric-common.jar;D:\JDev11g\Middleware\oracle_common\modules\oracle.xdk_11.1.0\xmlparserv2.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\bpel1-1-xbeans.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\orabpel-common.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\orabpel.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\bpel_coherence_config.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\orabpel-exts.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\thirdparty.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\bpm-analytics.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\orabpel-thirdparty.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\wsif-binding.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\orabpel-validator.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\monitor-rt-xbean.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\oracle.soa.bpmn.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\user-patch.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.thirdparty.jar;D:\JDev11g\Middleware\jdeveloper\uddi\lib\oracle.soa.uddi.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\bpm-infra.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\testfwk-xbeans.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\fabric-ext.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\soa-infra-scheduler.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\xmlunit-1.1.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\fabric-runtime.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\soa-infra-tools.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\soa-xpath-exts.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\oracle-soa-client-api.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.wls.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\fabric-client.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\fabric-runtime-ext-was.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\fabric-runtime-ext-wls.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\oracle.soa.fabric.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.workflow_11.1.1\bpm-services.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.ext_11.1.1\classes
In scac_out.xml file following is the error message
<Fault>
<severity>error</severity>
<loc>/ns:composite</loc>
<line/>
<col/>
<file/>
<msg>
<![CDATA[SCAC-50012]]>
</msg>
</Fault>

Hi,
I have run into the same problem with SOA 11.1.1.5 version. In my case after fixing the following two errors it seems to work fine.
If you have followed the guide, there must be some errors:
First the java code if copied then contains an extra enter value:
Instead of:
"try {
System.out.println("Prototype for invoking an OIM API from a SOA Composite");
System.out.println("RTM Usecase: Self Registration Approval by Organization
Administrator");"
Use the following:
"try {
System.out.println("Prototype for invoking an OIM API from a SOA Composite");
System.out.println("RTM Usecase: Self Registration Approval by Organization Administrator");"
The other error is that you should not use <BEAHOME>/oracle_common/modules/oracle.jps_11.1.1/jps-manifest.jar, but the <BEAHOME>/oracle_common/modules/oracle.jps_11.1.1/jps-api.jar in jdeveloper. After these the deployment to the application server works fine for me.

Error provisioning a resource with custom approval process

Hi,
While trying to provision a resource with custom approval process, I get the following error:
<May 11, 2012 8:07:18 AM IST> <Warning> <oracle.wsm.agent.handler.wls.WLSPropertyUtils> <BEA-000000> <WLSPropertyUtils:getOperationName(),operation name is null>
<May 11, 2012 8:07:18 AM IST> <Warning> <org.eclipse.persistence.session.oim> <BEA-000000> <
Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLException: ORA-12899: value too large for column "DEV_OIM"."REQUEST_APPROVALS"."APPROVAL_STATUS" (actual: 442, maximum: 32)
Error Code: 12899
Call: UPDATE REQUEST_APPROVALS SET APPROVAL_STATUS = ? WHERE (REQUEST_APPROVALS_KEY = ?)
bind => [com.oracle.bpel.client.BPELFault: faultName: {{http://schemas.xmlsoap.org/ws/2003/03/business-process/}selectionFailure}
parts: {{
summary=<summary>XPath query string returns zero node.
The assign activity of the to node query is returning zero node.
Either the to node data or the xpath query in the to node was invalid.
According to BPEL4WS spec 1.1 section 14.3, verify the to node value at line number 251 in the BPEL source.
</summary>}
, 6]
Query: UpdateObjectQuery(oracle.iam.request.vo.ApprovalData@11e00d4b)
at org.eclipse.persistence.exceptions.DatabaseException.sqlException(DatabaseException.java:324)
at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeDirectNoSelect(DatabaseAccessor.java:801)
at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeNoSelect(DatabaseAccessor.java:867)
at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.basicExecuteCall(DatabaseAccessor.java:587)
at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeCall(DatabaseAccessor.java:530)
at org.eclipse.persistence.internal.sessions.AbstractSession.executeCall(AbstractSession.java:914)
at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:206)
at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:192)
at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.updateObject(DatasourceCallQueryMechanism.java:715)
at org.eclipse.persistence.internal.queries.StatementQueryMechanism.updateObject(StatementQueryMechanism.java:430)
at org.eclipse.persistence.internal.queries.DatabaseQueryMechanism.updateObjectForWriteWithChangeSet(DatabaseQueryMechanism.java:1141)
at org.eclipse.persistence.queries.UpdateObjectQuery.executeCommitWithChangeSet(UpdateObjectQuery.java:84)
at org.eclipse.persistence.internal.queries.DatabaseQueryMechanism.executeWriteWithChangeSet(DatabaseQueryMechanism.java:287)
at org.eclipse.persistence.queries.WriteObjectQuery.executeDatabaseQuery(WriteObjectQuery.java:58)
at org.eclipse.persistence.queries.DatabaseQuery.execute(DatabaseQuery.java:675)
at org.eclipse.persistence.queries.DatabaseQuery.executeInUnitOfWork(DatabaseQuery.java:589)
at org.eclipse.persistence.queries.ObjectLevelModifyQuery.executeInUnitOfWorkObjectLevelModifyQuery(ObjectLevelModifyQuery.java:109)
at org.eclipse.persistence.queries.ObjectLevelModifyQuery.executeInUnitOfWork(ObjectLevelModifyQuery.java:86)
at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.internalExecuteQuery(UnitOfWorkImpl.java:2898)
at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1225)
at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1207)
at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1167)
at org.eclipse.persistence.internal.sessions.CommitManager.commitChangedObjectsForClassWithChangeSet(CommitManager.java:233)
at org.eclipse.persistence.internal.sessions.CommitManager.commitAllObjectsWithChangeSet(CommitManager.java:108)
at org.eclipse.persistence.internal.sessions.AbstractSession.writeAllObjectsWithChangeSet(AbstractSession.java:3260)
at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.commitToDatabase(UnitOfWorkImpl.java:1413)
at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.commitToDatabaseWithChangeSet(UnitOfWorkImpl.java:1518)
at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.writeChanges(UnitOfWorkImpl.java:5499)
at oracle.iam.request.repository.ApprovalRepository.updateApprovalInstanceWithOutcome(ApprovalRepository.java:84)
at oracle.iam.request.impl.ApprovalManager.approvalInstanceComplete(ApprovalManager.java:111)
at oracle.iam.request.impl.ApprovalPolicyServiceImpl.updateApprovalResult(ApprovalPolicyServiceImpl.java:52)
at oracle.iam.request.api.ApprovalPolicyServiceEJB.updateApprovalResultx(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy351.updateApprovalResultx(Unknown Source)
at oracle.iam.request.api.ApprovalPolicyService_1nib43_ApprovalPolicyServiceRemoteImpl.updateApprovalResultx(ApprovalPolicyService_1nib43_ApprovalPolicyServiceRemoteImpl.java:462)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:84)
at $Proxy184.updateApprovalResultx(Unknown Source)
at oracle.iam.request.api.ApprovalPolicyServiceDelegate.updateApprovalResult(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at Thor.API.Base.SecurityInvocationHandler$1.run(SecurityInvocationHandler.java:68)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.security.Security.runAs(Security.java:41)
at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(weblogicLoginSession.java:52)
at Thor.API.Base.SecurityInvocationHandler.invoke(SecurityInvocationHandler.java:79)
at $Proxy350.updateApprovalResult(Unknown Source)
at oracle.iam.request.workflowcallback.ApprovalCallBack.completed(ApprovalCallBack.java:28)
at oracle.iam.platform.workflowservice.ws.CallbackServiceImpl.callback(CallbackServiceImpl.java:98)
at oracle.iam.platform.workflowservice.ws.wls.CallbackService.callback(CallbackService.java:33)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker.invoke(WLSInstanceResolver.java:92)
at weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker.invoke(WLSInstanceResolver.java:74)
at com.sun.xml.ws.server.InvokerTube$2.invoke(InvokerTube.java:151)
at com.sun.xml.ws.server.sei.EndpointMethodHandlerImpl.invoke(EndpointMethodHandlerImpl.java:265)
at com.sun.xml.ws.server.sei.SEIInvokerTube.processRequest(SEIInvokerTube.java:100)
at weblogic.wsee.jaxws.tubeline.FlowControlTube$FlowControlAwareTube.processRequest(FlowControlTube.java:155)
at weblogic.wsee.jaxws.tubeline.FlowControlTube$1.run(FlowControlTube.java:94)
at weblogic.wsee.jaxws.tubeline.FlowControlTube$1.run(FlowControlTube.java:92)
at javax.security.auth.Subject.doAs(Subject.java:337)
at weblogic.wsee.jaxws.tubeline.FlowControlTube.processRequest(FlowControlTube.java:91)
at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:604)
at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:563)
at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:548)
at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:445)
at com.sun.xml.ws.server.WSEndpointImpl$2.process(WSEndpointImpl.java:373)
at com.sun.xml.ws.transport.http.HttpAdapter$HttpToolkit.handle(HttpAdapter.java:524)
at com.sun.xml.ws.transport.http.HttpAdapter.handle(HttpAdapter.java:255)
at com.sun.xml.ws.transport.http.servlet.ServletAdapter.handle(ServletAdapter.java:140)
at weblogic.wsee.jaxws.WLSServletAdapter.handle(WLSServletAdapter.java:208)
at weblogic.wsee.jaxws.HttpServletAdapter$AuthorizedInvoke.run(HttpServletAdapter.java:310)
at weblogic.wsee.jaxws.HttpServletAdapter.post(HttpServletAdapter.java:223)
at weblogic.wsee.jaxws.JAXWSServlet.doPost(JAXWSServlet.java:124)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at weblogic.wsee.jaxws.JAXWSServlet.service(JAXWSServlet.java:79)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.am.agent.wls.filters.OAMServletAuthenticationFilter.doFilter(OAMServletAuthenticationFilter.java:260)
at oracle.security.am.agent.wls.filters.OAMValidationSystemFilter.doFilter(OAMValidationSystemFilter.java:133)
at oracle.security.wls.oamagent.OAMAgentWrapperFilter.doFilter(OAMAgentWrapperFilter.java:121)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: java.sql.SQLException: ORA-12899: value too large for column "DEV_OIM"."REQUEST_APPROVALS"."APPROVAL_STATUS" (actual: 442, maximum: 32)
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:74)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:135)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:210)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:473)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:423)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1095)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:205)
at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1040)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1379)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3568)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3694)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeUpdate(OraclePreparedStatementWrapper.java:1508)
at weblogic.jdbc.wrapper.PreparedStatement.executeUpdate(PreparedStatement.java:172)
at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeDirectNoSelect(DatabaseAccessor.java:792)
at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeNoSelect(DatabaseAccessor.java:867)
at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.basicExecuteCall(DatabaseAccessor.java:587)
at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeCall(DatabaseAccessor.java:530)
at org.eclipse.persistence.internal.sessions.AbstractSession.executeCall(AbstractSession.java:914)
at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:206)
at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:192)
at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.updateObject(DatasourceCallQueryMechanism.java:715)
at org.eclipse.persistence.internal.queries.StatementQueryMechanism.updateObject(StatementQueryMechanism.java:430)
at org.eclipse.persistence.internal.queries.DatabaseQueryMechanism.updateObjectForWriteWithChangeSet(DatabaseQueryMechanism.java:1141)
at org.eclipse.persistence.queries.UpdateObjectQuery.executeCommitWithChangeSet(UpdateObjectQuery.java:84)
at org.eclipse.persistence.internal.queries.DatabaseQueryMechanism.executeWriteWithChangeSet(DatabaseQueryMechanism.java:287)
at org.eclipse.persistence.queries.WriteObjectQuery.executeDatabaseQuery(WriteObjectQuery.java:58)
at org.eclipse.persistence.queries.DatabaseQuery.execute(DatabaseQuery.java:675)
at org.eclipse.persistence.queries.DatabaseQuery.executeInUnitOfWork(DatabaseQuery.java:589)
at org.eclipse.persistence.queries.ObjectLevelModifyQuery.executeInUnitOfWorkObjectLevelModifyQuery(ObjectLevelModifyQuery.java:109)
at org.eclipse.persistence.queries.ObjectLevelModifyQuery.executeInUnitOfWork(ObjectLevelModifyQuery.java:86)
at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.internalExecuteQuery(UnitOfWorkImpl.java:2898)
at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1225)
at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1207)
at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1167)
at org.eclipse.persistence.internal.sessions.CommitManager.commitChangedObjectsForClassWithChangeSet(CommitManager.java:233)
at org.eclipse.persistence.internal.sessions.CommitManager.commitAllObjectsWithChangeSet(CommitManager.java:108)
at org.eclipse.persistence.internal.sessions.AbstractSession.writeAllObjectsWithChangeSet(AbstractSession.java:3260)
at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.commitToDatabase(UnitOfWorkImpl.java:1413)
at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.commitToDatabaseWithChangeSet(UnitOfWorkImpl.java:1518)
at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.writeChanges(UnitOfWorkImpl.java:5499)
at oracle.iam.request.repository.ApprovalRepository.updateApprovalInstanceWithOutcome(ApprovalRepository.java:84)
at oracle.iam.request.impl.ApprovalManager.approvalInstanceComplete(ApprovalManager.java:111)
at oracle.iam.request.impl.ApprovalPolicyServiceImpl.updateApprovalResult(ApprovalPolicyServiceImpl.java:52)
at oracle.iam.request.api.ApprovalPolicyServiceEJB.updateApprovalResultx(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy351.updateApprovalResultx(Unknown Source)
at oracle.iam.request.api.ApprovalPolicyService_1nib43_ApprovalPolicyServiceRemoteImpl.updateApprovalResultx(ApprovalPolicyService_1nib43_ApprovalPolicyServiceRemoteImpl.java:462)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:84)
at $Proxy184.updateApprovalResultx(Unknown Source)
at oracle.iam.request.api.ApprovalPolicyServiceDelegate.updateApprovalResult(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at Thor.API.Base.SecurityInvocationHandler$1.run(SecurityInvocationHandler.java:68)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.security.Security.runAs(Security.java:41)
at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(weblogicLoginSession.java:52)
at Thor.API.Base.SecurityInvocationHandler.invoke(SecurityInvocationHandler.java:79)
at $Proxy350.updateApprovalResult(Unknown Source)
at oracle.iam.request.workflowcallback.ApprovalCallBack.completed(ApprovalCallBack.java:28)
at oracle.iam.platform.workflowservice.ws.CallbackServiceImpl.callback(CallbackServiceImpl.java:98)
at oracle.iam.platform.workflowservice.ws.wls.CallbackService.callback(CallbackService.java:33)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker.invoke(WLSInstanceResolver.java:92)
at weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker.invoke(WLSInstanceResolver.java:74)
at com.sun.xml.ws.server.InvokerTube$2.invoke(InvokerTube.java:151)
at com.sun.xml.ws.server.sei.EndpointMethodHandlerImpl.invoke(EndpointMethodHandlerImpl.java:265)
at com.sun.xml.ws.server.sei.SEIInvokerTube.processRequest(SEIInvokerTube.java:100)
at weblogic.wsee.jaxws.tubeline.FlowControlTube$FlowControlAwareTube.processRequest(FlowControlTube.java:155)
at weblogic.wsee.jaxws.tubeline.FlowControlTube$1.run(FlowControlTube.java:94)
at weblogic.wsee.jaxws.tubeline.FlowControlTube$1.run(FlowControlTube.java:92)
at javax.security.auth.Subject.doAs(Subject.java:337)
at weblogic.wsee.jaxws.tubeline.FlowControlTube.processRequest(FlowControlTube.java:91)
at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:604)
at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:563)
at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:548)
at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:445)
at com.sun.xml.ws.server.WSEndpointImpl$2.process(WSEndpointImpl.java:373)
at com.sun.xml.ws.transport.http.HttpAdapter$HttpToolkit.handle(HttpAdapter.java:524)
at com.sun.xml.ws.transport.http.HttpAdapter.handle(HttpAdapter.java:255)
at com.sun.xml.ws.transport.http.servlet.ServletAdapter.handle(ServletAdapter.java:140)
at weblogic.wsee.jaxws.WLSServletAdapter.handle(WLSServletAdapter.java:208)
at weblogic.wsee.jaxws.HttpServletAdapter$AuthorizedInvoke.run(HttpServletAdapter.java:310)
at weblogic.wsee.jaxws.HttpServletAdapter.post(HttpServletAdapter.java:223)
at weblogic.wsee.jaxws.JAXWSServlet.doPost(JAXWSServlet.java:124)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at weblogic.wsee.jaxws.JAXWSServlet.service(JAXWSServlet.java:79)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.am.agent.wls.filters.OAMServletAuthenticationFilter.doFilter(OAMServletAuthenticationFilter.java:260)
at oracle.security.am.agent.wls.filters.OAMValidationSystemFilter.doFilter(OAMValidationSystemFilter.java:133)
at oracle.security.wls.oamagent.OAMAgentWrapperFilter.doFilter(OAMAgentWrapperFilter.java:121)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
<May 11, 2012 8:07:18 AM IST> <Error> <oracle.iam.request.impl> <IAM-2050200> <Failed to create the request in the repository.>
<May 11, 2012 8:07:18 AM IST> <Error> <oracle.iam.request.impl> <IAM-2050050> <Exception thrown Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLException: ORA-12899: value too large for column "DEV_OIM"."REQUEST_APPROVALS"."APPROVAL_STATUS" (actual: 442, maximum: 32)
Error Code: 12899
Call: UPDATE REQUEST_APPROVALS SET APPROVAL_STATUS = ? WHERE (REQUEST_APPROVALS_KEY = ?)
bind => [com.oracle.bpel.client.BPELFault: faultName: {{http://schemas.xmlsoap.org/ws/2003/03/business-process/}selectionFailure}
parts: {{
summary=<summary>XPath query string returns zero node.
The assign activity of the to node query is returning zero node.
Either the to node data or the xpath query in the to node was invalid.
According to BPEL4WS spec 1.1 section 14.3, verify the to node value at line number 251 in the BPEL source.
</summary>}
, 6]
Any idea how to resolve this ??
Thanks,

Based on the error trace
Caused By: java.sql.SQLException: ORA-12899: value too large for column "DEV_OIM"."REQUEST_APPROVALS"."APPROVAL_STATUS" (actual: 442, maximum: 32)
you are inserting a value too large for REQUEST_APPROVALS.APPROVAL_STATUS column. It should contain values like COMPLETED, approved, rejected etc... Check your custom approval process again.
Regards
user12841694

ITEM tab in the Approval Process overview IN srm 7.0 AND EP 7.1

Hi Friends,
I am working in SRM 7.0 with EP 7.1..
1 . I have to remove 'ITEM' tab in the approval process overview screen which is apprearing in Portal. approval process overview screen will be appeared when 'Display / Edit Agents' Button in the Header level of the Shopping cart screen.
2 . Remove Approval Process overview tab in the detail screen of the shopping cart.
Any idea
John.

Hi Masayuki,
Thank you for your quik reply.
can you please explain little bit more on this..
2. tab
Easy way is right click, User Setting -> Hide Tab. or User Setting -> More.. Remove display tab
I tried this option but this is each user setting , Can we make this centerlized?
or
Go to SE80 Webdynpro and change the visible property.
I know the webdynpro for this tab but to change this visible property do I need have access key( Core modification ) or any other way to do such as enhancement spot?
John.
Edited by: John peter on Jul 10, 2009 11:16 AM

ITEM tab in the Approval Process overview

Hi Friends,
    I am working in SRM 7.0 with EP 7.1..
    1 . I have to remove 'ITEM' tab in the approval process overview screen. approval process overview screen will be appeared when 'Display / Edit Agents' Button in the Header level of the Shopping cart screen.
   2 . Remove Approval Process overview tab in the detail screen of the shopping cart.
   Any idea
John.

Hi Masayuki,
   Thank you for your quik reply.
can you please explain little bit more on this..
2. tab
Easy way is right click, User Setting -> Hide Tab. or User Setting -> More.. Remove display tab
I tried this option but this is each user setting , Can we make this centerlized?
or
Go to SE80 Webdynpro and change the visible property.
I know the webdynpro for this tab but to change this visible property do I need have access key( Core modification ) or any other way to do such as enhancement spot?
John.
Edited by: John peter on Jul 10, 2009 11:16 AM

General Approval Process in SSHR

Similar Messages

Maybe you are looking for