General availability of MDM GDS 2.1, which NetWeaver Version is supported?

Hello Community,
does anyone know when GDS 2.1 is general available and which Java NetWeaver Stack version will be supported?
Kind Regards,
Tobi

Hi Tobi,
GDS2.1 might will be GA around December 2010, but this is not official.
Regards,
Gabor

Similar Messages

Which XSLT versions are support by Oracle BPEL? v1.1 or v2.0?

Which XSLT versions are support by Oracle BPEL? v1.1 or v2.0?
As far as I heard v1.1 is the highest version but some functions of v2.0 are supported as well.
Is this true?
If yes: Which XSLT functions of v2.0 are supported?
Does it matter if I change the
version="1.1"
attribute in the topmost
<xsl:stylesheet......>
tag?
Which XSLT processor is built-in/used?
Peter

XSL mapper in BPEL supports 1.0 only in-built. And this is true for 11g also. However, we can declare <xsl:stylesheet version = 2.0 ... and use all xpath 2.0 functions. I have used few of them and has been successful so far. Once you declare version as 2.0 the only issue will be that XSL's visual GUI mapper will not work in JDeveloper and you will need to modify the code from the source.

Which Vmware Version is supported by SAP HANA ???

Hi SAP HANA Experts,
We knew that now a days SAP HANA is supporting Vmware also to install it...
Can anyone provide which Vmware version is supported by SAP HANA for PRD & NON PRD Setup's

Hi,
SAP HANA Virtualized Central Note https://service.sap.com/sap/support/notes/1788665
SAP HANA Virtualized Overview ppt http://www.saphana.com/docs/DOC-3334
SAP HANA Guidelines for VMware http://www.saphana.com/docs/DOC-4192
VMware Best Practices for SAP HANA http://vmware.com/go/sap-hana
Thanks & Regards,
Kumar

Which mx4j version is supported by BlazeDS 3.2

I've a jetty started in a phoenix container which uses mx4j.server.MX4JMBeanServerBuilder (MX4J-Release: 3.0.2).
When I deploy BlazeDS war on this jetty, it gives me "java.lang.LinkageError". I guess some older version of mx4j is supported by BlazeDS. Here's the stack trace:
java.lang.LinkageError: Class javax/management/MBeanServer violates loader constraints
    at java.lang.ClassLoader.defineClass1(Native Method)
    at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
    at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
    at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
    at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
    at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
    at org.mortbay.jetty.webapp.WebAppClassLoader.loadClass(WebAppClassLoader.java:366)
    at org.mortbay.jetty.webapp.WebAppClassLoader.loadClass(WebAppClassLoader.java:337)
    at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
    at java.lang.Class.getDeclaredConstructors0(Native Method)
    at java.lang.Class.privateGetDeclaredConstructors(Class.java:2357)
    at java.lang.Class.getConstructor0(Class.java:2671)
    at java.lang.Class.newInstance0(Class.java:321)
    at java.lang.Class.newInstance(Class.java:303)
    at javax.management.MBeanServerFactory.newBuilder(MBeanServerFactory.java:456)
    at javax.management.MBeanServerFactory.checkMBeanServerBuilder(MBeanServerFactory.java:494)
    at javax.management.MBeanServerFactory.getNewMBeanServerBuilder(MBeanServerFactory.java:530)
    at javax.management.MBeanServerFactory.newMBeanServer(MBeanServerFactory.java:304)
    at javax.management.MBeanServerFactory.createMBeanServer(MBeanServerFactory.java:219)
    at javax.management.MBeanServerFactory.createMBeanServer(MBeanServerFactory.java:180)
    at sun.management.ManagementFactory.createPlatformMBeanServer(ManagementFactory.java:264)
    at java.lang.management.ManagementFactory.getPlatformMBeanServer(ManagementFactory.java:512)
    at flex.management.PlatformMBeanServerLocator.getMBeanServer(PlatformMBeanServerLocator.java :45)
    at flex.management.BaseControl.register(BaseControl.java:179)
    at flex.management.runtime.AdminConsoleDisplayRegistrar.<init>(AdminConsoleDisplayRegistrar. java:19)
    at flex.management.runtime.messaging.MessageBrokerControl.<init>(MessageBrokerControl.java:8 5)
    at flex.messaging.MessageBroker.<init>(MessageBroker.java:196)
    at flex.messaging.config.MessagingConfiguration.createBroker(MessagingConfiguration.java:104 )
    at flex.messaging.MessageBrokerServlet.init(MessageBrokerServlet.java:106)
Please help.
Thanks,
Faizan

Hi,
SAP HANA Virtualized Central Note https://service.sap.com/sap/support/notes/1788665
SAP HANA Virtualized Overview ppt http://www.saphana.com/docs/DOC-3334
SAP HANA Guidelines for VMware http://www.saphana.com/docs/DOC-4192
VMware Best Practices for SAP HANA http://vmware.com/go/sap-hana
Thanks & Regards,
Kumar

Which iOs version is supported?

Hi
I'm just wondering which version of iOs is supported by the 4.5SDK?
Regards,
Lars

i think it comes out in June right now it is Android only someone correct me if i am wrong !

CS5.5 Air for iOs - Which iOs versions are supported?

Hi everyone,
I wanted to test the functionalities of the Cs5.5 exporter for iOS, by exporting a previous Flash game i made on my 2G iPod, with 4.2.1 iOs version installed.
Since i wouldn't want to pay for the iOS developer certificate just for trying, can anyone point out a solution for this?
Moreover, is anyone sure it's gonna work? I wouldn't wanna spend good money just for seeing the Flash exporter is no good for my device.
Suggestions?
Anyone tried on similar OS?
Thanks a lot
Iacopo

Ok, i managed to use a fake certificate (i know i shouldn't say that) just to check the feasability of a game on iOS and.... I found out that the exporter doesn't work on my iPod Touch 2G (iOs 4.2.1)!! It says the iPod is not supported!!
Any news on this?
Do i need to buy an iPhone 5 to test flash games? It sounds a little extreme....

Which DAQmx Version is sutiable for Labview 8.2.1

Hai Guys,
I am Thiyagu. I have one Doubt in DAQmx. If One year before my senior create One VI. The VI Labview Version 8.2.1. Lastweek running VI Harddisk was crased. I have only source code. I pasted that source code in another PC. I opened that source code It shows DAQmx Write file.VI was Missing. So i searced Daq file and I find it. So i Pasted that Vi in Source code It shows Labview 11 error. Currnt labview Version is 8.6 and DAQ version 8.8. So kindly tell me How to slove this issue and Which DAQmx Version is suitable for 8.2.1
Please do the needfull.
Thanks
Thanks
Thiyagarajan.S
WABCO Vehicle Control System

Any DAQmx should work, I use the latest with LV7.1. You can download it from ni.com or use the CDs supplied with your hardware.
The mistake you made was to copy the missing VIs. You need to run the DAQmx installer instead (after installing LV, so it can detect which LV versions to support).
Felix
www.aescusoft.de
My latest community nugget on producer/consumer design
My current blog: A journey through uml

Announcing General Availability of PowerShell Connector and Release Candidate of Generic SQL and SAP Roles/Users

The FIM team is pleased to announce the availability of some additional Connectors for FIM2010R2.
General Availability of PowerShell Connector
The PowerShell Connector can be used to communicate with a system through PowerShell scripts. This allows an easy and flexible way to communicate with other systems but also to pre-/post-process data and files before handed over to the FIM Synchronization
Service. We believe the community will help providing scripts for this Connector for various systems and will open a place where scripts can be published for reuse.
TechNet docs:
http://go.microsoft.com/fwlink/?LinkID=393057
Download:
http://go.microsoft.com/fwlink/?LinkID=393056
Release Candidate of Generic SQL Connector
The Generic SQL Connector will allow you to connect to any database where you have an ODBC driver available. It enables new features compared to the built-in MA such as support for Stored Procedures, running SQL scripts, built-in delta import support, import
multiple object types, connect to multiple tables, and much more. This Connector is built on ECMA2.3 which allows schema discoverability to be customized in the Sync Engine UI. A pre-release of the next Sync Engine hotfix is included with the Connector download
and is required for the Connector to work.
Download:
https://connect.microsoft.com/site433/Downloads/DownloadDetails.aspx?DownloadID=52652
Release Candidate of SAP Users and Roles/Groups
The updated SAP templates for Users and Roles/Groups allows you to manage Users, Roles, and Groups in SAP. This also include password sync for Users to SAP. The Connector will make sure roles are represented as groups to make it possible to manage these
with bhold. This template will require the previously published WebService Connector:
http://go.microsoft.com/fwlink/?LinkID=235883.
Download:
https://connect.microsoft.com/site433/Downloads/DownloadDetails.aspx?DownloadID=52651
If you have participated in any other Connector preview program you will have access to the Release Candidate downloads. If you have not participated before then to get access to the preview programs on Connect either join the program “Identity and Access
Management”, “FIM Synchronization Service Connectors Pre-release” on
http://connect.microsoft.com/directory or follow this link
http://connect.microsoft.com/site433/SelfNomination.aspx?ProgramID=6709&pageType=1
We have also published an update to the Generic LDAP Connector adding support for some additional LDAP directories, see
http://support.microsoft.com/kb/2936070/. If you have additional LDAP directories you think we should support, please feel free to contact me.
                On behalf of the FIM Sync team,
                /Andreas Kjellman

On Tue, 18 Mar 2014 08:09:43 +0000, David Burghgraeve wrote:
We've been using the OpenLDAPXMA to be able to connect to ACF2 CA-LDAP (from Computer Associates) running on a IBM Z-OS Mainframe System. We've been using it for password synchronization since 2004 on MIIS. Today it's still used via the
OpenLDAPXMA (64bit) on FIM 2010 R2.
We had to tweak the password management component in the OpenLDAPXMA to support the error messages we get from the ACF2 System, as we support a multi-master password setup between Mainframe and Active Directory (one can change the password on
MF and/or on Windows). by example "LDP0406E ACF2 error modifying lid(ACF00155 NEW PASSWORD CANNOT BE THE SAME AS CURRENT PASSWORD)".
Additionally, we cannot get the delta import to work with the CA-LDAP, there's no capability in it and we tried to use the time attribute to use in the query for recent changes, but it does not work. (I think we need it in a large integer format
or unix time integer).
Would be great to have Microsofts' support in this :)
In a case like this where your follow-up has nothing to do with the
original post you should create a new thread.
Having said that, neither of the MAs to which you refer are official
Microsoft MAs and as such there is no support from Microsoft available.
Also, keep in mind that the ECMA1/XMA extensibility framework has been
deprecated and replaced by the ECMA 2.0. You should plan on replacing
existing ECMA1 management agents with ECMA2.0 connectors.
Paul Adare - FIM CM MVP
"It's 106 light-years to Chicago, we've got a full chamber of anti-matter,
a half a pack of cigarettes, it's dark, and we're wearing visors."
"Hotsync." -- Paul Tomblin & Peter da Silva

MDM - GDS - AS2

Hi,
on one presentaiton about MDM - GDS
I've noticed that SAP says: GDS provides out of the box connectivity to
GDSN (via AS2 adapter)
does it mean that GDS includes some As2 adapter ?
as XI does include this adapter in standard
or do we need to buy it ?
Thank you very much,
Regards,
michal

Hi Michael,
SAP provides out of the box connectivity to the data pool 1Sync which is part of the GDSN.
An AS2 adapter is not part of the shipment of the MDM-GDS solution, though it is required to use one. But we do have a reseller agreement with Seeburger and therefore their AS2 adapter can be acquired from us.
Kind regards
Felix Loecher

URGENT::Regarding MDM GDS

Hi SDNers,
WE seek your help regarding syndicating data out from SAP MDM GDS.
Could you explain the required configurations to be made in SAP MDM GDS and SAP XI for successfully sendig data out from MDM GDS?
Any help in this regard would be rewarded.
PS: SAP Configuration Guide is being referred which suggests use of GDS_DP_Out interface in IR of SAP XI. Kindly share knowledge in this regard, if any.
Regards,
Krutarth

Hello Krutarth,
All about the configuration u can find in SAP service market place for GDS..
http://service.sap.com/installMDM.
Rgds
Ankit

Sap Netweaver 7.1 Enhancement Package 2 General Availability

Hi All,
Could someone let me know general availability date of enhancement package 2 for sap Netweaver 7.1?
Also please provide a link to service marketplace with some information about this.
Thanks!

Since there is nothing available concerning a RampUp for 7.1 EHP2 I'd guess the next release is 7.3 which will be available at the end of the month (may).
Markius

Office 365 Customers: General Availability for Access Apps

The news hit last month that Access Apps would be available for all Office 365 customers, well now we can all move full speed ahead. So, what does general availability mean? Customers can now create, share, and use the Access Apps with the same level of full
guarantee as the rest of Office 365. Prior to the announcement, the Access Apps were not under the Office 365 service-level agreement (SLA) and were available only under preview.

Hi,
I find the content which you mentioned above is talking about from the blog:
http://blogs.office.com/2014/02/03/access-apps-general-availability-for-office-365-customers/
Access apps are databases that run in the cloud on most browsers, if you need to know more information, please wait for the blog update.
If I misunderstand something, please let me know.
Thanks,
George Zhao
TechNet Community Support

General Availability of EWM 9.2

Hello,
we need to update our EWM system from 9.0 to 9.2 for a rollout project with new processes. The new processes requires new function of EWM 9.2.
In pam i see "General Availability" planned for Q1/2015 ... now we have Q2. I would like to avoid ramp-up.
Has someone a more specific date for me?
Is there a contact person at SAP which i could ask this question?
Thank you
Kind regards
Bernhard Humer

Hello Suraj,
I get a "403 Access denied"-error ( "... You do not have the permissions to access this resource" ) when i follow the link.
in PAM ( https://service.sap.com/sap/support/pam?hash=pvnr%3D67838200100900007125%26pt%3Dg%257Cd ) i only see probable Q1/2015.
Thanks
Bernhard

Java RTS 2.1 General Availability free evaluation releases available

Hi:
I would like to notify this forum that free evaluation releases of
Java Real-Time System (Java RTS) 2.1 General Availability (GA)
are available for download for the following platforms:
* Solaris 10 (Update 4 and Update 5) on SPARC and x86
* Linux with real-time POSIX APIs on x86. The specific Linux
distributions which this release has been tested on (at the time
of this writing) are: SUSE Linux Enterprise Real Time 10 SP2
(released) and Red Hat Enterprise MRG 1.0 Errata (to be released).
The URL for the web page where to start in order to be able to
get to the download link for any of the Java RTS 2.1 GA evals is:
[http://java.sun.com/javase/technologies/realtime/rts/]
You will be asked to fill out a quick survey and agree to a click-
through e-license, then a download link will be e-mailed to you.
The latest version of the Java RTS 2.1 GA technical documentation
bundle included with the product is being separately maintained at
our product website and can be accessed starting from here:
[http://java.sun.com/javase/technologies/realtime/reference/rts_productdoc.html]
Please also make sure to check out our updated FAQ:
[http://java.sun.com/javase/technologies/realtime/faq.jsp]
Thanks,
-Carlos
Carlos B. Lucasius
Java SE Embedded and Real-Time Engineering
Sun Microsystems, Inc.
[http://sites.google.com/site/javartsandjavaseforembedded/]

Hello,
Just a quick question: can we have an official position from Sun regarding support of earlier releases of Solaris with Java RTS 2.1? Our customer is currently running Solaris 10 Update 3 with current Recommended patches, and the 2.1 beta cyclic driver supported this version of Solaris. However with the official release version of 2.1, support for U3 disappeared (only U4 and U5 are now supported). Aside from "rubber stamping" the Solaris build via /etc/release, is there a technical reason why U3 is no longer supported? As long as our kernel is up to date, can we safely use 2.1? Or is it just a case of being unable to officially support and test so many releases of Solaris?
Is this a general rule-of-thumb we can expect in future: only supporting the last 2 updates of Solaris 10?
Your advice is appreciated.
Thanks,
Dave.

I used to look my photos in my tv using apple tv, now i can't when i access through apple tv/ computer/ my library photo option is not available, i check home sharing and which photos i'm sharing from my mac/itunes but i still can share photos w/apple tv

I used to look my photos in my tv using apple tv, now i can't when i access through apple tv/ computer/ my library photo option is not available, i check home sharing and which photos i'm sharing from my mac/itunes but i still can share photos w/apple tv

Morning JJFH,
Thanks for using Apple Support Communities.
If after setting up Home Sharing, you cannot access your shared iTunes library over your home network from your Apple TV, take a look at this article:
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Best of luck,
Mario

General availability of MDM GDS 2.1, which NetWeaver Version is supported?

Similar Messages

Maybe you are looking for