General Error, Error Code = -1

Dear All,
I developped an Add-On using DI API which is used to add Sales Order to BO documents.
The methods I used are : oOrder.Add and oOrder.Update. this works fine untill a certain time where the same code without any modification started to generat the following error "Err No.= -1, Err Description= General Error".
THis error is generated randomly I couldn't identify a specific action that genrate the error. it is more specificaly at the oOrder.update where this error occurs and after that the hole documents is corrupted thismead the batch linked to the document lines are deleted as if i did not select any batch ( since all my article are managed by batch).
Please advise ASAP

Hi Mary,
The files are automatically created by the DI API, so this is normal.
Did you replace the DI API with the PL23 version and are you connecting to more than 1 SBO server (perhaps with a different patchlevel)?
Regards
Ad

Similar Messages

Error- "Tax code B0 country IN does not exist in procedure TAXINN"

Hi to All,
I'm working on a Import PO. While doing MIRO for planned delivery cost, I'm getting an error "Tax code B0 country IN does not exist in procedure TAXINN"
I've assigned the Tax code to company code, but still I'm not able to solve this problem. Could anybody tell me the areas in which I may have made the mistake?
Thanks & Regards,
Piyush

Hi Piyush
You assign your tax code to company code at IMG--> Logis General --> Tax on Goods Movemnt --> Basic Settings --> Calculation of excise duty -> Condition type excise determination --> Maintain Tax code to country code
If still problem is not resolved you maintain the all rates to 0 in FTXP of this Tax code.
Regard
Vivek
-- Reward if helpful !!

Error: Tax cod OI country IN does not exist in procedure TAXINN

Hi all,
while posting invoice, i am facing an error
"Tax code OI country IN does not exist in procedure TAXINN"
I defined the tax code OI and assigned it to my company code XXX. I created Tax procedure TAXINN with three basic condition types (BASB, MWAS, MVBS). I assigned my tax procedure to the country IN.
I think i missed some thing in the configuration part. Please guide me.
Thanks!
Pavan

Hi,
1. If tax is deducable in nature means if you are using CIN then assigm Tax code
SPRO --> logisctic General --> tax on goods movements --> india --> bacis setting --> determine of excise condition --> defaults excise conidtion
here assign tax code with company code .
2. If while doing miro you are getting Tax Code" VN" Instead of OI
then please check condition in FV11 for material/plant/vendor combination, may be this tax code system is fetching from there or some other combination you are maintaining.
You can use data base tables also for your Tax code if you know tax conditions used there
T Code : SE16
Table : A363
A358 Country/Plant/Ctrl code/Material
A357 Country/Plant/Ctrl code
A362 Country/NBM-NCM Code
A971 Tax Code
A359 Plant/Matl group
Hope Help u !
Regards,
Pardeep Malik

When i try to open itunes its showing error 7 code 193

when i try to open itunes its showing error 7 code 193. it wont let me open it at all. i dont want to lose my music. i did the repair option already and it did not work.

That article has been withdrawn.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

Hp 6500 (all-in-one) "General Printing Error (Ox610000f6)" displayed after first use!

I unpacked my new hp 6500 All-in-One (wireless) today. I was receiving my first fax on the hp 6500 when it stopped printing midway and started to display "ERROR. General Printer Error (Ox610000f6). Refer to printer documentation." I have turned it off and unplugged it many times. It does not work at all. Error message has been displayed all day. This is ridiculous. If I can't resolve this tomorrow it's going back to the store and I'm getting another brand.
There is also NO reference for the error code. Weak.
Message Edited by marie14 on 07-12-2009 10:37 PM

The original poster just acquired their printer. In this case, the solution was to simply replace it as it was still under warranty.
The error code indicates an internal detected logic fault. These fall into two classes: transient events and faults do to failed HW. Transient events are often solved by simply power cycling the printer after disconnecting all I/O. Permanent faults are typically not repairable by the user.
I understand your frustration. If the printer is still under warranty, then simply ask H-P to replace it.
Other solutions are to reset the printer's NVRAM. For those with an Officejet 6500, the reset method is to press and hold the * and 6 keys while plugging in power and then continue to hold for another 10 seconds.
Regards / Jim B / Wireless Enthusiasts
( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
+ Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

Device Error - Sense Code(5 26 00)??

Hi everyone..
Another problem with PrE8.01. I am arriving at this error code: "Device Error - Sense Code (5 26 00) - Invalid Field in Parameter List - General" after the encoding and compiling media stage of burning to disk. I have a pioneer dvd/bluray burner (new) that has been working before (not with PrE8). Any suggestion please?
Ben

I've asked some questions and made some recommendations in your other thread so I won't repeat them here.
For your burning problem:
Check for a firmware update for your drive. As you described the machine as new it could well be out of date.
What brand of media are you trying to burn to?
For a DVD use the 'Burn to Folder' option. Does this complete?
Play the video (from step 3) in a software DVD player (VLC is good and free if you don't have one). Does this play OK?
Burn the folder to a DVD using a stand-a-lone burning tool (ImgBurn is good and free if you don't have one). Make sure you burn no higher than x4 speed. Does the burn complete? Does it play on a DVD player connected to a TV?
Post back with your answers please.
Cheers,
Neale
Insanity is hereditary, you get it from your children

DBM Error return code -11 in LC10 Administration in SCM System Live Cache

Hello,
We have installed SCM 4.1 on Solaris on one box and LC 7.5 on another solaris box.
For kernel upgrade, we shut down Live Cache using LC10>administration on SCM server. After kernel patch, other patches for ABAP stack, we upgraded LC to SP11 build 35.
Since then, we get following error in LC10.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Name and Server : LCA - gva1073
DBMRFC Function : DBM_EXECUTE
Command : dbm_version
Error : DBM Error
Return Code : -11
Error Message : tp error: Terminating. [nlsui0.c 1934] pid
++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Also, in DB59, when we try to check connection, we get following error -
General Connection Data
Connection Name....: LCA
Database Name......: LCA
Database Server....: gva1073
tp Profiles........: no_longer_used
DBM User...........: CONTROL
Test Scope
1. Execute an external operating system command (DBMCLI)
2. Determine status using TCP/IP connection SAPDB_DBM (DBMRFC
command mode)
3. Determine status using TCP/IP connection SAPDB_DBM_DAEMON (DBMRFC
session mode)
4. Test the SQL connection (Native SQL at CON_NAME)
Application Server: gva1075_SCD_03 (
SunOS )
1. Connect. test with "dbmcli db_state"
Successful
2. Connect. test with command mode "dbmrfc db_state"
Unsuccessful
dbm_system_error
Name and Server : LCA - gva1073
DBMRFC Function : DBM_EXECUTE
Command : db_state
Error : DBM Error
Return Code : -11
Error Message : tp error: Terminating. [nlsui0.c 1934] pid
3. Connect. test with session mode "dbmrfc db_state"
Unsuccessful
dbm_system_error
Name and Server : LCA - gva1073
DBMRFC Function : DBM_CONNECT
Error : DBM Error
Return Code : -11
Error Message : tp error: Terminating. [nlsui0.c 1934] pid
4. Connect. test with "native SQL" ( LCA )
Successful
++++++++++++++++++++++++++++++++++++++++++++++++++++
Can anybody please help?
Thanks and regards,
Vaibhav

Hello Vaibhav,
while using transaction LC10, the error 11 "tp error: Terminating. [nlsui0.c ...]" occurs. The user authorization with tp fails and the application server cannot connect to the liveCache.
I assumed, that it's due to a library version mismatch, tp cannot use the liveCahe UNICODE libraries.
Please check, that the tp call at the command line works properly. And a dbmcli call in the transaction SM49 with the tp options
(dbmcli ::
-d <LC-SID> -n <LC-servername> -tpp <profile> -tpi <system-SID>
-tpc <connection - LCA/LDA> dbm_version)
works also properly.
I recommend you to update the liveCache client software on the Application server.
If you've got access to OSS/Service Market Place, then please take a look at note
649814 how to update the liveCache client software on the application server.
< Please also review the SAP notes 847736 & 831108 >
Before the liveCache client version will be upgraded on the application
server you can use the workaround by switching off the central authorization for the liveCache LCA/LDA connections:
In transaction LC10, choose Integration and deactivate the option Central authorization, then save.
If you are the official SAP customer, I recommend you to create the ticket to SAP on 'BC-DB-LVC' queue.
Thank you and best regards, Natalia Khlopina

Error message code on my HP Deskjet 3051A

Im trying to print and my printer keeps giving me a error messgae code 0X805D0074. Please HElP!!! need to print ASAP!!

Hello,
This document should be able to help: Error Message Displays on the Printer Control Panel. It describes the general issue as: While trying to print, the printer displays aan error message with numbers and letters (an alphanumeric code). For example, 'Error 0xc18a0001' or 'B8000094' might display on the printer control panel. The numbers and letters vary. Some begin with ‘0x…’ while others begin with a ‘B’ or ‘C,’ but they are usually preceded by the word ‘Error.’
Hope this helps,
I am an HP Employee.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved. If both apply......do both.

General Export Error 301 while running syndication batch

Hi
When I run the syndication batch for the map of the Customer repository I get an error "General Export Error 301 ".Has anyone faced this problem.Is any configuration needed to be done.The syndication server is running fine..
Is there any blog related to this..
Points will be awarded for useful answers.
Thanks in advance

Hi,
You have given port no 2015. Are you sure that the port no of the repository from which you are going to syndicate data is correct.You can check the port no of any MDM repository using MDM console.For this you have to click on the mounted MDM server name.It will display the list of all repositories available on that server with their port numbers.Please confirm port no. is correct.
Also confirm that you are using client system code instead of the client system name.IN addition to this,also check
●      Is the target MDM repository loaded?
●      Is the port type Outbound?
●      Is the ports Processing property set to Automatic?
●      Is the port connected to a Syndicator or other MDSS?
●      Do the Login and Password values in the mdss.ini file match the Login and Password values for the repository on the MDM Console
You can try one more thing, Just give the command with <b>"-l" option</b>
Hope it will help you.Revert back if you have further queries.
Thanks,
Shiv.

BEA-380000: General runtime error: Read channel closed - intermittent

I am encountering this error code intermittently. My production has been live from past 20 months and I see this error very recently and its like once a week.
I doubt if this has something to do with the network and as this is very generic error(BEA-380000) I am not able to find any pointers on this error.
My environment
Solaris 10,Weblogic 10.3(Not clustered)
fault="<con:fault xmlns:con="http://www.bea.com/wli/sb/context">
<con:errorCode>BEA-382500</con:errorCode>
<con:reason>OSB Service Callout action received SOAP Fault response</con:reason>
<con:details>
<con1:ReceivedFaultDetail xmlns:con1="http://www.bea.com/wli/sb/stages/transform/config">
<con1:faultcode xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">soapenv:Server</con1:faultcode>
<con1:faultstring>BEA-380000: General runtime error: Read channel closed</con1:faultstring>
<con1:detail>
<con:fault>
<con:errorCode>BEA-380000</con:errorCode>
<con:reason>General runtime error: Read channel closed</con:reason>
<con:location>
<con:node>RouteNode1</con:node>
<con:path>request-pipeline</con:path>
</con:location>
</con:fault>
</con1:detail>
</con1:ReceivedFaultDetail>
</con:details>
<con:location>
<con:node>PipelinePairNode1</con:node>
<con:pipeline>PipelinePairNode1_request</con:pipeline>
<con:stage>stage1</con:stage>
<con:path>request-pipeline</con:path>
</con:location>
</con:fault>"
Cheers
Sridhar

Matt,
How are you invoking local proxy from HTTP proxy (using route node or service callout)? Is local proxy calling another proxy/business service? Do you have fault handling implemented?
Can you also check server log to figure out any additional error information (like stacktrace)?
Regards,
Anuj

General Installation Error, mac 10.8.2

I downloaded the latest flash player from the abode website (for mac, safari, english). Download is fine. Installation proceeds to about 50% completion and then terminates with a "General Installation Error". Here's the configuration:
Mac intel core 2 duo 2.26 GHz
OS 10.8.2
Safari 6.0.2
I downloaded the flash player uninstaller, and it reported a successful uninstall. Also checked for directories in /Library/Internet Plugins and the (Disabled) folder. No flash player components left.
Checked pop-up blocker (it's not set), system preferences (download apps from any source is checked). Also disabled norton auto-protect. Install still fails.
I'm out of ideas. Any suggestions would be greatly appreciated.

There doesn't appear to be a solution to these particular error messages from Adobe. I have followed the guidance from Adobe.com (uninstalled and re-installed) and then followed the guidance in this forum post and others using the terminal route, all without luck. I have no Flash functionality (other than in Chrome) which is extremely annoying.
My setup is MacBookPro Mavericks 10.9. Firewall is off (temporarily). No virus software. No remnants of Flash as far as I can tell. Logged into a administrator account.
Here's the log for "flash" from console:
Dec 26 12:55:15 XXX kernel[0]: hfs: mounted Adobe Flash Player Installer on device disk2s2
Dec 26 12:55:15 XXX.config mds[55]: (Normal) Volume: volume:XXX ********** Bootstrapped Creating a default store:1 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/Adobe Flash Player Installer
Dec 26 12:55:41 XXX.config sudo[791]: admin : TTY=ttys000 ; PWD=/Users/admin/Desktop ; USER=root ; COMMAND=./Install Adobe Flash Player.app/Contents/MacOS/Install Adobe Flash Player –debug
Dec 26 12:56:07 XXX kernel[0]: hfs: could not initialize summary table for Flash Player
Dec 26 12:56:07 XXX kernel[0]: hfs: mounted Flash Player on device disk3s2
Dec 26 12:56:08 XXX.config Adobe Flash Player Install Manager[818]: Unexpected umask value for process: 0
Dec 26 12:56:26 XXX.config Adobe Flash Player Install Manager[818]: Install failed with error code: 11.
Dec 26 12:56:26 XXX kernel[0]: hfs: unmount initiated on Flash Player on device disk3s2
Dec 26 12:56:31 XXX.config sudo[839]: admin : TTY=ttys000 ; PWD=/Users/admin/Desktop ; USER=admin ; COMMAND=/usr/bin/open http://get.adobe.com/flashplayer/completion/aih/?exitcode=11&type=install
Many thanks in advance for your support.

"General printing Error"

this printe has is just over a year old it started printed very faded pictures at first I bought new ink and it did not help the picture quality at all then maybe a month or so later it wont print anything at all it keeps saying general printing error I have used the hp support assistant and nothing is working

Hi SuperMotte,
I understand that you are getting an error message on the front panel of your HP C410 printer. I would like you to go ahead and start troubleshooting An Alphanumeric Code (Example: '0x...' or 'C2...') or 'Ink System Failure' Error Message Displays on...You will notice in this document you are required to remove your printhead, please be very careful as you do not want to scratch any of the contacts.
I will watch for your reply, let me know if this was helpful or if you require more assistance.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

General observer error

Hi
I have written an application for SBO SP0 PL7. This program uses the diapi and runs outside of SAP.
It is constantly scanning for ascii files which basically contain goods received information.
The program works fine most of the time but occasionally it crashes with a 'General observer error'. The customer seems to think it is something to do with the number of transactions it is processing, it seems to crash after roughly 9,000
transactions.
I know the data is fine because the customer simply restarts the program and it is fine.
Can anyone suggest anything please ?
Regards Andy

Hi Andy,
Try running a test with a large number of transactions and monitor the memory consumption through Task Manager. Your code could be perfect in terms of instantiating and disposing the objects you use but if the object itself is leaking memory through its own methods then there is nothing you can really do about it. That is why it's a good idea to test using the latest patch for the DI API. SAP will be correcting any memory leaks that are found in their objects. You can check the info.txt file that comes with the patch to see what DI API issues have been fixed.
Kind Regards,
Owen

General socket error

hi
i keep getting general sokcet error everytime i try using twitter through my wifi connection and if i try using the net it says service unavailable. it works fine through the 3g connection but the wifi connection keeps saying general socket error.
any thoughts?

Nav005 wrote:
hi
i keep getting general sokcet error everytime i try using twitter through my wifi connection and if i try using the net it says service unavailable. it works fine through the 3g connection but the wifi connection keeps saying general socket error.
any thoughts?
Do you have a BlackBerry Data Plan enabled on your account with your carrier or mobile provider?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

N96 general system error

I have an n96-1 on software version 10.065 custom version 10.065.249.1 all was working fine, I put music on the internal memory card, that worked fine. then I brought a memory card and put it in, Now when i try to play music i get a general system error message, take the card out reset the phone it all plays fine, Any idea?

For me the same error message showed. But I uninstalled the phone remote control thing (do not remember its name). I mean the program wich lets you take control over your phone from the internet. That caused trouble but music started playing well immediately after I just removed that silly program from my phone's mass storage memory!
Phones history: Nokia 3210 > Nokia 5210 > Nokia 9210 Communicator > Nokia 3230 > Nokia N91 > Nokia N96
Current phone: Nokia N96, Elisa Finland Network Branded, v11 Unbranded Firmware [MADE IN FINLAND] Product Code: 0573582

General system error!

i just got my E63 and there was no issues
till i tried to transfer a song to the phone and it won't save
after trying again and again it gave the "general system error message!"
that memory card got corrupt and all my songs and pictures disappaered
after changing the memory card:
i can't access the pictures on my memory card from gallery
the game i installed hang when i try to delete them and they don't play either
opera mini dosen't install unto the phone
an anti virus won't update even after downloading unto the phone
the music player hangs and give general system error! message after playing for a while
then i either exit and wait a while or switch off the phone and then refresh and all the songs are
added again
the same thing with the ringtone sometimes it rings out the nokia tone other times the tone i have personalised
even after restoring factory setting, and
scanning the memory card from a PC
pls help me i want to enjoy the E63 i bought!!!
Solved!
Go to Solution.

From what I can understand, your phone is unstable, and your memory card appears to be corrupt.
First, backup the contents of your phone memory using the latest PC Suite. Next, backup the music, videos, pictures, etc. on the memory card to your PC.
Does your phone work fine without the memory card? If it does, then connect the phone in Mass Storage mode to your PC, and format it. Now see if the phone works fine with the memory card inserted. Once verified, you can copy your music and other files to the card and continue using the phone.
If you still face issues, then proceed with the next step
Check for firmware updates, here. If there is a new version, install it using Nokia Software Updater. Make sure you have a stable internet connection and a full battery before you begin the update process. And, most importantly, follow the on-screen prompts correctly.
Else, try the following:
1. Soft reset: I assume you've made a backup of your phone memory contents. Type *#7370# on the stand-by screen. Enter the security code when prompted (default is 12345). This would wipe your phone memory clean.
2. Hard reset: This is to be resorted to only if your phone has become extremely unstable. Turn off your phone, press and hold down the 3, * and Call (green) buttons, and turn on your phone without releasing them. Let go off these three keys only when you see the Nokia logo or other signs of life on your phone.
Let us know how it goes... Good luck
Message Edited by deepestblue on 08-Sep-2009 04:59 PM
Cheers,
DeepestBlue
5800 XpressMusic (Rock Stable) | N73 Music Edition (Never Say Die) | 1108 (Old and faithful)
If you find any post useful, click on the Green "Kudos" Button on the left to say Thank You...

General Error, Error Code = -1

Similar Messages

Maybe you are looking for