General Error has occured.Object does not exist error in the front end

Hai,
In the rpd , I have imported 2 new tables to the exisiting connection pool from 2 diferent schemas and used those 2 tables to the existing model in the physical layer and given joins .
I did everything till the presentation layer and when I am trying to pull data from the added table in the front end it is giving me error saying that the oject does not exist.
Also I tried to see the data in the physical layer in rpd and the same error came up
Any solutions please

863997 wrote:
Hai,
In the rpd , I have imported 2 new tables to the exisiting connection pool from 2 diferent schemas and used those 2 tables to the existing model in the physical layer and given joins .
I did everything till the presentation layer and when I am trying to pull data from the added table in the front end it is giving me error saying that the oject does not exist.
Also I tried to see the data in the physical layer in rpd and the same error came up
Any solutions pleaseOnce again you are invited to How to extract the keys from the ER STUDIO.
Seriously: I am genuinely interested in why members of the BI and eBS community with no history of using the APEX forum persistently use this as a dumping ground for off-the-wall requests. If we can find this out then there might be a (remote) possibility of getting something changed on OTN to prevent it and avoid wasting everyone's time.

Similar Messages

  • Error: Path to object does not exist at Request

    Hi experts,
    i have a scenario asynchronous/syncrhonous: file to rfc and get back response rfc to other file. I have 3 communication channel: 1 sender file, 1 receiver file, 1 receiver RFC. The communication channel sender file show the follow error:
    Attempt to process file failed with com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Path to object does not exist at Request, the whole lookup name is localejbs/AF_Modules/Request/ResponseBean.
    I do not understand how modules(AF_Modules/Request/ResponseBean) in adapter works, the documents that I have found I am not much has clarified, could someone please explain and tell me something's error?
    very thanks,
    regards

    Hi,
    Check the receiver agreement, you might have configured the file receiver communication channel name instead of the RFC receiver communication channel name.
    Also check the module parameters in the sender file CC
    Processing sequence:
    Module name                                           Module type                               Module key
    AF_Modules/RequestResponseBean        Local Enterprise Bean                       1
    CallSapAdapter                                       Local Enterprise Bean                       2
    AF_Modules/ResponseOnewayBean         Local Enterprise Bean                       3
    Module configuration:
    Modulekey                              parameter name                         parametervalue
    1                                             passThrough                               true
    3                                            receiverChannel                            <File receiver  CC>
    3                                             receiverService                            <Receiver service name>
    Regards,
    Nithiyanandam

  • "An error has occurred:Object reference not set to an instance of an object."

    This error message comes up with a user in InfoView.  The user schedules a report, updates parameters, and the report kicks off successfully.  But then a few minutes later, this error is received.    This occurs sporadically, regardless of the length of time of report or amount of data being retrieved.  Sometimes the report runs to completion.  Other times this error message occurs.
    Has anyone seen this before and have any thoughts?
    Thank you.
    “An error has occurred:Object reference not set to an instance of an object.”

    Are you able to replicate the issue both in Java and .NET InfoView?
    For .NET InfoView, sometimes the "An error has occurred: Object reference not set to an instance of an object" error shows up after the .NET Framework is upgraded to 2.0

  • Transport-level error has occurred...No Process is on the other end of the pipe upon first ExecuteQuery() after successful connect.

    I’m running MS SQL Server 2005, Express Edition, SP3 on Windows XP.  Local connections only. 
    In preparation to restore a database, I use IWSQLDMOServer::KillProcesses() to allow the database restore.  (IWSQLSMOResore::SQLRestore())   The restore is successful and I appear to be able to connect OK.  (No error indication on the
    connect)  However, the first time I try to use the database via an ExecuteQuery() the call fails and the connection state is changed to Closed.  I also get the “Transport-level error has occurred...No Process is on the other end of the pipe” exception.
    Closing and restarting the application fixes the problem.
    Also, disconnecting and reconnecting twice before the ExecuteQuery() call also fixes the problem. 
    So, I can hide the problem by connecting twice, but I am hoping there is a better solution.
    Walter Eykel

    It appers when you connect for the restore process, you are opening a different session than that of the original one, with a different database context.
    The first time you try to execute a query, you attempt to use the session that was open BEFORE the KillProcesses() call and therefore was killed. By the time you run the first time, your client is informed that the previous session is no longer available.
    In the second time, as your client was informed that the original session was killed, it opens a new one.
    Its the same behavior as in SSMS.
    As a workaround, you could change your database context of your
    current session to a base that wont be restored, call the restore methods, and then switch back to the original database context.

  • BUS2080 "OBJECT DOES NOT EXIST" error message....

    Hi Gurus,
    I am trying to create a workflow for Service Process Notification in SWDD using BO BUS2080 . The Work Flow is activated without any errors but when i enter the instance number it comes as "OBJECT DOES NOT EXIST".
    I created a subtype for BUS2080 ,delegated the object and i am using the parent object in my work flow.Please help me out in executing my Work Flow.
    Thanks,
    Syed.

    Please check first in SWO1 whether the object instance exist or not. I hope you are giving the right key fields. First test with correct key fields thru SWO1.
    <b>Reward points if useful</b>

  • Workflow error : execute_method_object_sync Object does not exist

    Hi Experts,
    I am facing this error in the following scenario.
    1. I have Z business object delegated from the standard BO BUS2105.
    2. In one of the events, we are triggered another workflow by FM SWE_EVENT_CREATE.
    3. the FM SWE_EVENT_CREATE does not have a COMMIT WORK.
    4. this issue is being faced only in production environment in few cases.
    5. I am getting the error message execute_method_object_sync Object does not exist  and also
        execute_method_bor object does not exist.
    Please let me know the reason behind this issue. it works perfectly fine in development and test systems.
    Is the issue because of the non existence of commit work? and I have not called in update task.
    Please guide me.
    Thanks,
    Rohan

    Hi Dolly,
    I think your DS is based on an ABAP query which is not available in the source system. Check if that is transported/active.

  • Time series does not exist, Error in Source System

    Hi friends,
    I am loading the data from APO system and i am getting the below error after scheduling the info Packs.. can you analyze and let me know your suggestions
    Error Message : Time series does not exist,
                             Error in Source System
    I have pasted the ststus message below
    Diagnosis
    An error occurred in the source system.
    System Response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Extractor .
    Refer to the error message.
    Procedure
    How you remove the error depends on the error message.
    Note
    If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
    Thanks,
    YJ

    Hi,
    You better search for the notes with the message ""Time series does not exist". You will get nearly 18 notes. Go through each note and see the relevence to your problem and do the needful as it is mentioned in the note .
    Few notes are:
    528028,542946,367951,391403,362386.
    With rgds,
    Anil Kumar Sharma .P

  • Error-IM258-Object does not exist (Status Management)

    Dear All
    We have used the enhancement "MCI10001" for triggering the external E mail while scheduling the maintenance plan using T code IP10.
    System will fetch the E mail ID from the equipment master -partner function either Vendor or User responsible and sends the mail
    But while executing IP10 system throws an error message as follows
    Error Msg no: IM 258- Object does not exist (Status Management)
    This refers to an error in central status management.
    Kindly help on the above issue
    Regards
    Thyagarajan

    l have same problem  my code  below
    help me please .
    if email is not INITIAL and ulke is not initial and sy-tcode eq 'QM01' and sy-ucomm eq 'BUCH' and I_VIQMEL-QMART = 'Q1'.
        CALL FUNCTION 'POPUP_TO_CONFIRM'
          EXPORTING
            TITLEBAR       = 'E-mail'
            TEXT_QUESTION  = 'E-mail Göndermek istiyormusunuz ?'
          IMPORTING
            ANSWER         = answer
          EXCEPTIONS
            TEXT_NOT_FOUND = 1
            OTHERS         = 2.
    if answer eq 1 and ulke = 'TR'.
    lt_mailtxt ='Değerli Müşterimiz,'.
    APPEND lt_mailtxt.clear lt_mailtxt.
    lt_mailtxt = 'Şikayetiniz sistemimize alınmıştır. Müşteri şikayeti sorumlularımız sizlerle en yakın zamanda irtibata '.
    APPEND lt_mailtxt.clear lt_mailtxt.
    lt_mailtxt = 'geçeceklerdir. Şikayetiniz için teşekkür eder, saygılarımızı sunarız.'.
    APPEND lt_mailtxt.clear lt_mailtxt.
    lt_mailtxt =''.
    APPEND lt_mailtxt.clear lt_mailtxt.
    data:  it_packing_list like sopcklsti1 occurs 0 with header line,
           it_receivers like somlreci1 occurs 0 with header line,
            gd_cnt type i,
            gd_sent_all(1) type c,
            gd_doc_data like sodocchgi1,
            gd_error type sy-subrc.
    gd_doc_data-doc_size = it_packing_list-body_num * 255.
    Populate the subject/generic message attributes.
      gd_doc_data-obj_langu = sy-langu.
      gd_doc_data-obj_name  = 'SAPRPT'.
      gd_doc_data-obj_descr = 'Naksan KGM'.
      gd_doc_data-sensitivty = 'F'.
    Describe the body of the message
      clear it_packing_list.
      refresh it_packing_list.
      it_packing_list-transf_bin = space.
      it_packing_list-head_start = 1.
      it_packing_list-head_num = 0.
      it_packing_list-body_start = 1.
      describe table lt_mailtxt lines it_packing_list-body_num.
      it_packing_list-doc_type = 'RAW'.
      append it_packing_list.
      CLEAR it_receivers.
      it_receivers-receiver =  email.
      it_receivers-rec_type = 'U'.
      it_receivers-com_type = 'INT'.
      it_receivers-notif_del = 'X'.
      it_receivers-notif_ndel = 'X'.
      append it_receivers.
      call function 'SO_DOCUMENT_SEND_API1'
           exporting
                document_data              = gd_doc_data
                put_in_outbox              = 'X'
                sender_address             = 'sinan.tataroglu@***.com'
                sender_address_type        = 'INT'
                commit_work                = 'X'
           importing
                sent_to_all                = gd_sent_all
           tables
                packing_list               = it_packing_list
                contents_txt               = lt_mailtxt[]
                receivers                  = it_receivers
           exceptions
                too_many_receivers         = 1
                document_not_sent          = 2
                document_type_not_exist    = 3
                operation_no_authorization = 4
                parameter_error            = 5
                x_error                    = 6
                enqueue_error              = 7
                others                     = 8.
    IF sy-subrc EQ 0.
    COMMIT WORK.
      Push mail out from SAP outbox.
    SUBMIT rsconn01 WITH mode = 'INT' AND RETURN.
    ENDIF.
    elseif ulke ne 'TR' and answer eq 1.
    lt_mailtxt ='Dear Customer,'.
    APPEND lt_mailtxt.clear lt_mailtxt.
    lt_mailtxt = 'Your compliant has just entered to system. Customer complaint responsible will contact with you ASAP.'.
    APPEND lt_mailtxt.clear lt_mailtxt.
    lt_mailtxt = 'Thanks for your complaint.'.
    APPEND lt_mailtxt.clear lt_mailtxt.
    gd_doc_data-doc_size = it_packing_list-body_num * 255.
    Populate the subject/generic message attributes
      gd_doc_data-obj_langu = sy-langu.
      gd_doc_data-obj_name  = 'SAPRPT'.
      gd_doc_data-obj_descr = 'Naksan KGM'.
      gd_doc_data-sensitivty = 'F'.
    Describe the body of the message
      clear it_packing_list.
      refresh it_packing_list.
      it_packing_list-transf_bin = space.
      it_packing_list-head_start = 1.
      it_packing_list-head_num = 0.
      it_packing_list-body_start = 1.
      describe table lt_mailtxt lines it_packing_list-body_num.
      it_packing_list-doc_type = 'RAW'.
      append it_packing_list.
      CLEAR it_receivers.
      it_receivers-receiver =  email.
      it_receivers-rec_type = 'U'.
      it_receivers-com_type = 'INT'.
      it_receivers-notif_del = 'X'.
      it_receivers-notif_ndel = 'X'.
      append it_receivers.
      call function 'SO_DOCUMENT_SEND_API1'
           exporting
                document_data              = gd_doc_data
                put_in_outbox              = 'X'
                sender_address             = 'peykan.samli@****.com'
                sender_address_type        = 'INT'
                commit_work                = 'X'
           importing
                sent_to_all                = gd_sent_all
           tables
                packing_list               = it_packing_list
                contents_txt               = lt_mailtxt[] "it_message
                receivers                  = it_receivers
           exceptions
                too_many_receivers         = 1
                document_not_sent          = 2
                document_type_not_exist    = 3
                operation_no_authorization = 4
                parameter_error            = 5
                x_error                    = 6
                enqueue_error              = 7
                others                     = 8.
    IF sy-subrc EQ 0.
      COMMIT WORK.
      Push mail out from SAP outbox.
      SUBMIT rsconn01 WITH mode = 'INT' AND RETURN.
    ENDIF.

  • 11g SOA Composite Rules Error - Rule session pool object does not exist

    Hi all,
    I'm hoping someone has experienced this and found a way through it. We're looking at exposing Oracle Rules DecisionFunctions via the automagically created web services in JDeveloper. We've tried several Rules examples, including the OrderApproval one available online, and are getting errors everytime we try and test the web service.
    Firstly we get this error:
    [2010-09-01T09:47:24.249+10:00] [soa_server1] [ERROR] [] [oracle.soa.services.rules] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000IfAZ45P0FwI5yrDCiW1CV7Dc000AwY,0] [WEBSERVICE_PORT.name: IDecisionService_pt] [APP: soa-infra] [composite_name: CR] [component_name: OracleRules1] [component_instance_id: 04c3bc86-9452-4755-9bbf-51591f1c7fff] [J2EE_MODULE.name: fabric] [dcid: 761c1dbb0eb1dbdc:-33082b47:12ac627683f:-7ffd-0000000000002aae] [WEBSERVICE.name: OracleRules1_DecisionService_1_ep] [J2EE_APP.name: soa-infra] [composite_instance_id: 130022] <.> Error caching the Decision Services metadata.[[
    Error caching the decision services metadata for path default/CR!1.0*soa_f8581f86-106e-4f47-825f-89148db6663b/OracleRules1.
    Check the underlying exception and correct the error. This is most likely due to a rule modeling isssue. Validate the rule dictionary in rule designer and fix any errors and warnings. If the error persists, contact Oracle Support Services.
    Error caching the Decision Services metadata.
    Error caching the decision services metadata for path default/CR!1.0*soa_f8581f86-106e-4f47-825f-89148db6663b/OracleRules1.
    Check the underlying exception and correct the error. This is most likely due to a rule modeling isssue. Validate the rule dictionary in rule designer and fix any errors and warnings. If the error persists, contact Oracle Support Services.
         at oracle.bpel.services.rules.impl.DecisionServiceCache.cacheDecisionServiceMetadata(DecisionServiceCache.java:1211)
         at oracle.bpel.services.rules.impl.DecisionServiceCache.prepare(DecisionServiceCache.java:362)
         at oracle.bpel.services.rules.impl.DecisionServiceImpl.preProcess(DecisionServiceImpl.java:221)
         at oracle.bpel.services.rules.fabric.BusinessRulesServiceEngine.request(BusinessRulesServiceEngine.java:609)
         at oracle.integration.platform.blocks.mesh.SynchronousMessageHandler.doRequest(SynchronousMessageHandler.java:139)
         at oracle.integration.platform.blocks.mesh.MessageRouter.request(MessageRouter.java:179)
         at oracle.integration.platform.blocks.mesh.MeshImpl.request(MeshImpl.java:155)
         at sun.reflect.GeneratedMethodAccessor1197.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
         at oracle.integration.platform.metrics.PhaseEventAspect.invoke(PhaseEventAspect.java:59)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
         at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
         at $Proxy248.request(Unknown Source)
         at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.doMessageProcessing(WebServiceEntryBindingComponent.java:1169)
         at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.processIncomingMessage(WebServiceEntryBindingComponent.java:768)
         at oracle.integration.platform.blocks.soap.FabricProvider.processMessage(FabricProvider.java:113)
         at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcessing(ProviderProcessor.java:1168)
         at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:996)
         at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessing(ProviderProcessor.java:562)
         at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:222)
         at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcessor.java:185)
         at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:430)
         at oracle.integration.platform.blocks.soap.FabricProviderServlet.doPost(FabricProviderServlet.java:477)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: java.lang.NullPointerException
         at oracle.rules.sdk2.datamodel.DecisionFunction.getGlobalTypeIDs(DecisionFunction.java:860)
         at oracle.rules.sdk2.datamodel.DecisionFunction.validate(DecisionFunction.java:342)
         at oracle.rules.sdk2.dictionary.DictionaryComponentTable.validate(DictionaryComponentTable.java:221)
         at oracle.rules.sdk2.datamodel.DataModel.validate(DataModel.java:92)
         at oracle.rules.sdk2.dictionary.RuleDictionary.validate(RuleDictionary.java:1093)
         at oracle.rules.sdk2.dictionary.RuleDictionary.update(RuleDictionary.java:835)
         at oracle.rules.sdk2.datamodel.DataModel.generateFactClasses(DataModel.java:115)
         at oracle.rules.sdk2.dictionary.RuleDictionary.dataModelRL(RuleDictionary.java:1398)
         at oracle.bpel.services.rules.impl.DecisionServiceCache.cacheDecisionServiceMetadata(DecisionServiceCache.java:1141)
         ... 44 more
    And then we get the following error:
    [2010-09-01T09:47:24.390+10:00] [soa_server1] [ERROR] [] [oracle.soa.services.rules] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000IfAZ45P0FwI5yrDCiW1CV7Dc000AwY,0] [WEBSERVICE_PORT.name: IDecisionService_pt] [APP: soa-infra] [composite_name: CR] [component_name: OracleRules1] [component_instance_id: 04c3bc86-9452-4755-9bbf-51591f1c7fff] [J2EE_MODULE.name: fabric] [dcid: 761c1dbb0eb1dbdc:-33082b47:12ac627683f:-7ffd-0000000000002aae] [WEBSERVICE.name: OracleRules1_DecisionService_1_ep] [J2EE_APP.name: soa-infra] [composite_instance_id: 130022] <.> [[
    oracle.fabric.common.BusinessFaultException
         at oracle.bpel.services.rules.impl.DecisionServiceCache.cacheDecisionServiceMetadata(DecisionServiceCache.java:1211)
         at oracle.bpel.services.rules.impl.DecisionServiceCache.prepare(DecisionServiceCache.java:362)
         at oracle.bpel.services.rules.impl.DecisionServiceImpl.preProcess(DecisionServiceImpl.java:221)
         at oracle.bpel.services.rules.fabric.BusinessRulesServiceEngine.request(BusinessRulesServiceEngine.java:609)
         at oracle.integration.platform.blocks.mesh.SynchronousMessageHandler.doRequest(SynchronousMessageHandler.java:139)
         at oracle.integration.platform.blocks.mesh.MessageRouter.request(MessageRouter.java:179)
         at oracle.integration.platform.blocks.mesh.MeshImpl.request(MeshImpl.java:155)
         at sun.reflect.GeneratedMethodAccessor1197.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
         at oracle.integration.platform.metrics.PhaseEventAspect.invoke(PhaseEventAspect.java:59)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
         at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
         at $Proxy248.request(Unknown Source)
         at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.doMessageProcessing(WebServiceEntryBindingComponent.java:1169)
         at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.processIncomingMessage(WebServiceEntryBindingComponent.java:768)
         at oracle.integration.platform.blocks.soap.FabricProvider.processMessage(FabricProvider.java:113)
         at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcessing(ProviderProcessor.java:1168)
         at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:996)
         at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessing(ProviderProcessor.java:562)
         at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:222)
         at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcessor.java:185)
         at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:430)
         at oracle.integration.platform.blocks.soap.FabricProviderServlet.doPost(FabricProviderServlet.java:477)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    And lastly this one:
    [2010-09-01T09:47:30.437+10:00] [soa_server1] [ERROR] [] [oracle.soa.services.rules] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000IfAZ5iO0FwI5yrDCiW1CV7Dc000Awd,0] [WEBSERVICE_PORT.name: IDecisionService_pt] [APP: soa-infra] [composite_name: CR] [component_name: OracleRules1] [component_instance_id: 08f3eaa8-ce61-4ec9-a646-af821be06420] [J2EE_MODULE.name: fabric] [dcid: 761c1dbb0eb1dbdc:-33082b47:12ac627683f:-7ffd-0000000000002ab0] [WEBSERVICE.name: OracleRules1_DecisionService_1_ep] [J2EE_APP.name: soa-infra] [composite_instance_id: 130023] <.> Rule session pool object does not exist.[[
    The requested rule session pool object for path default/CR!1.0*soa_f8581f86-106e-4f47-825f-89148db6663b/OracleRules1 and key OracleRulesSDK$OracleRules1 does not exist.
    Check the underlying exception and correct the error. This is most likely due to a rules validation error. Validate the rule dictionary in Rule Designer and correct the validation error. If the error persists, contact Oracle Support Services.
    Rule session pool object does not exist.
    The requested rule session pool object for path default/CR!1.0*soa_f8581f86-106e-4f47-825f-89148db6663b/OracleRules1 and key OracleRulesSDK$OracleRules1 does not exist.
    Check the underlying exception and correct the error. This is most likely due to a rules validation error. Validate the rule dictionary in Rule Designer and correct the validation error. If the error persists, contact Oracle Support Services.
         at oracle.bpel.services.rules.rpi.oracle.RuleSessionPool.getSession(RuleSessionPool.java:528)
         at oracle.bpel.services.rules.rpi.oracle2.OracleRuleSession.execute(OracleRuleSession.java:260)
         at oracle.bpel.services.rules.impl.DecisionServiceImpl.process(DecisionServiceImpl.java:331)
         at oracle.bpel.services.rules.fabric.BusinessRulesServiceEngine.request(BusinessRulesServiceEngine.java:634)
         at oracle.integration.platform.blocks.mesh.SynchronousMessageHandler.doRequest(SynchronousMessageHandler.java:139)
         at oracle.integration.platform.blocks.mesh.MessageRouter.request(MessageRouter.java:179)
         at oracle.integration.platform.blocks.mesh.MeshImpl.request(MeshImpl.java:155)
         at sun.reflect.GeneratedMethodAccessor1197.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
         at oracle.integration.platform.metrics.PhaseEventAspect.invoke(PhaseEventAspect.java:59)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
         at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
         at $Proxy248.request(Unknown Source)
         at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.doMessageProcessing(WebServiceEntryBindingComponent.java:1169)
         at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.processIncomingMessage(WebServiceEntryBindingComponent.java:768)
         at oracle.integration.platform.blocks.soap.FabricProvider.processMessage(FabricProvider.java:113)
         at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcessing(ProviderProcessor.java:1168)
         at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:996)
         at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessing(ProviderProcessor.java:562)
         at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:222)
         at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcessor.java:185)
         at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:430)
         at oracle.integration.platform.blocks.soap.FabricProviderServlet.doPost(FabricProviderServlet.java:477)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Has anyone had any luck actually getting this to work? If so, how? It simply seems like this particular aspect of the product is broken!
    Your help would be VERY much appreciated!
    Regards,
    Rhian

    Hi SR,
    Thanks for your response. I attempted what you've suggested (1=1 - asset new fact in output), however nothing has changed.
    This is occurring across several Composite Rules projects, including the Oracle provided Chapter 5 Order Approval example. Unless someone can suggest a solution to this issues, it looks like we're going to have to shelf our plans to utilize the Business Rules component via the composite service.
    Very frustrating couple of days, that's for sure! :{
    Regards,
    Rhian

  • Error IW351-------System: Status object does not exist

    Hello,
    I am getting bleow error while saving service order.
    System: Status object does not exist. Message Numner IW351
    Actually I have done one enhcement in the User exit of the Sales order in the form Routine...
    USEREXIT_SAVE_DOCUMENT_PREPARE  in MV45afzz.
    When i Try to save the service order i get the error messages which is coming from my validation
    After the error messgae i press ENTER and then try to change the order by clcicking on the advance shipment.
    As soon as i click on that i get a STOP messgae.
    Which i as below.
    System: Status object does not exist
    If I comment all my code and write only error message then it comes.
    but it does't come for information and warning message.
    actually steps are
    1. go to IW51
    2. create notification then service order then sales order
    3. if product hierarchy is different for material then it should display error on saving
    4. it is giving error message(my error message)
    5. if i press enter and then click on advance shipment icon(truck) for change it display standard message.
    which turn me out of transaction.
    but if i click on advance shipment icon without pressing enter its working fine..
    my error message is a normal error message .
    message e038(zcrm)
    " service line must be same".
    pls suggest.
    Regards
    LOKESH

    Hi,
    After MESSAGE add STOP. :
    MESSAGE ixxx(xxx) with param1 param2 param3 DISPLAY LIKE 'E'.
    STOP.
    or If ambiguity with usage of  STOP being obselete use EXIT after message.
    MESSAGE ixxx(xxx) with param1 param2 param3 DISPLAY LIKE 'E'.
    EXIT.
    BR
    Dep

  • ERROR at line 1: ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine ORA-20000: Oracle Text error: DRG-10700: preference does not exist: global_lexer ORA-06512: at "CTXSYS.DRUE", line 160 ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 366

    database version 11.2.0.4
    rac two node
    CREATE INDEX MAXIMO.ACTCI_NDX3 ON MAXIMO.ACTCI
    (DESCRIPTION)
    INDEXTYPE IS CTXSYS.CONTEXT
    PARAMETERS('lexer global_lexer language column LANGCODE')
    ERROR at line 1:
    ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
    ORA-20000: Oracle Text error:
    DRG-10700: preference does not exist: global_lexer
    ORA-06512: at "CTXSYS.DRUE", line 160
    ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 366

    Like the error message says, you don't have a global_lexer.  So, you need to create a global_lexer and that lexer must have at least a default sub_lexer, then you can use that global_lexer in your index parameters.  Please see the demonstration below, including reproduction of the error and solution.
    SCOTT@orcl12c> -- reproduction of problem:
    SCOTT@orcl12c> CREATE TABLE actci
      2    (description  VARCHAR2(60),
      3      langcode     VARCHAR2(30))
      4  /
    Table created.
    SCOTT@orcl12c> CREATE INDEX ACTCI_NDX3 ON ACTCI (DESCRIPTION)
      2  INDEXTYPE IS CTXSYS.CONTEXT
      3  PARAMETERS('lexer global_lexer language column LANGCODE')
      4  /
    CREATE INDEX ACTCI_NDX3 ON ACTCI (DESCRIPTION)
    ERROR at line 1:
    ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
    ORA-20000: Oracle Text error:
    DRG-10700: preference does not exist: global_lexer
    ORA-06512: at "CTXSYS.DRUE", line 160
    ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 366
    SCOTT@orcl12c> -- solution:
    SCOTT@orcl12c> DROP INDEX actci_ndx3
      2  /
    Index dropped.
    SCOTT@orcl12c> BEGIN
      2    CTX_DDL.CREATE_PREFERENCE ('global_lexer', 'multi_lexer');
      3    CTX_DDL.CREATE_PREFERENCE ('english_lexer', 'basic_lexer');
      4    CTX_DDL.ADD_SUB_LEXER ('global_lexer', 'default', 'english_lexer');
      5  END;
      6  /
    PL/SQL procedure successfully completed.
    SCOTT@orcl12c> CREATE INDEX ACTCI_NDX3 ON ACTCI (DESCRIPTION)
      2  INDEXTYPE IS CTXSYS.CONTEXT
      3  PARAMETERS('lexer global_lexer language column LANGCODE')
      4  /
    Index created.

  • Error Message : Object does not exist (status management)

    Hi Gurus,
    I am working on tcode IW52(Change Notifications). and using badi's for validations at different points.
    1. Order level,
    2. Notification,
    3. Task level validations.
    In the task level validations, I have an requirement that if certain condition is met, than user should not be able to delete the task. I have no problem doing that, I am able to restrict it.
    Now the issue is :
    Say you have 6 tasks, and condition is met for the 5th task and I try to delete it. then the error message "can not delete task" is getting triggered from the badi.
    and after this error message if you try to do any functionality on the 6th task, I am experiencing error message "Object does not exist (status management)".
    Is anyone aware of this error message, any suggestions are highly appreciated.
    Thanks in advance.
    Shrikant
    Edited by: Alvaro Tejada Galindo on Mar 17, 2008 1:56 PM

    Hi ,
    You have posted this question long back that is one and half year back nearly.
    You got an error message in IW52 stating Object does not exist ( status management ).
    Now iam also facing the same problem in iw22 transaction. Can you say me how you solved if you remember.

  • Why an "ORA-01006: bind variable does not exist" error when no dynamic SQL?

    Hi all,
    While running PL/SQL in SQL Developer 3.2.09, I got the following error after adding a section of code. Note that nothing I'm doing has anything to do with dynamic SQL (which is what 01006 is supposedly about).
    Error report:
    ORA-01006: bind variable does not exist
    01006. 00000 - "bind variable does not exist"
    *Cause:   
    *Action:
    After commenting out the new chunk of code that caused the error, the error persisted.
    After deleting the new code, the error went away.
    What the heck!?!? If you have any ideas, please lay 'em on me.
    Thanks so much,
    Kim
    P.S. It's a few hundred lines of code, so I didn't append it to this post and I don't see how to attach a file.

    Let's review a few facts:
    1. You post a question in the sql developer forum that has no apparent relation to sql developer. You could confirm this by doing the test using sql*plus or some other tool.
    2. You provide NO information about what database you are even using. The only clue is an ORA -xxx message that means SOME version of Oracle is involved.
    3. You provide NO information about what the four digit version of Oracle DB is being used.
    4. You provide NO information about what the code in general or what that specific section of the code is even doing. The code could be doing literally anything that Oracle is capable of doing.
    That's a bit like calling a mechanic you don't know, telling them your car is making a funny noise and asking them what the problem with your car is.
    >
    While running PL/SQL in SQL Developer 3.2.09, I got the following error after adding a section of code. Note that nothing I'm doing has anything to do with dynamic SQL (which is what 01006 is supposedly about).
    Error report:
    ORA-01006: bind variable does not exist
    01006. 00000 - "bind variable does not exist"
    *Cause:
    *Action:
    The error gives no indication of where the error occurred in the code.
    >
    Your first clue that your troubleshooting method is seriously flawed is when you make statements that aren't supported by any evidence at all but appear to be nothing but your opinion.
    Your second clue is when those statements appear to directly contradict what Oracle is telling you.
    I'm talking about these two statements you make; which you state as if they were universal truths
    >
    nothing I'm doing has anything to do with dynamic SQL
    (which is what 01006 is supposedly about).
    >
    If thoe were true then your 'unstated' conclusion appears to be that Oracle is wrong in saying 'bind variable does not exist'
    Sorry - but I would place my money on Oracle.
    I'm sure the above may sound harsh - it is intended to be. My four major rules (there are more) when troubleshooting Oracle problems.
    1. Assume that Oracle is CORRECT when it tells you there is a problem.
    2. Assume that you are WRONG if your opinion conflicts with what Oracle is telling you - see rule #1.
    3. Don't make ANY other assumptions. You can form hypotheses but don't state them as facts until they are proven.
    4. Your 'opinion' is only useful to the extent that it can help you form meaningful hypotheses - see rule #3.
    >
    To reiterate, there is no dynamic SQL in the code.
    >
    To reiterate - if, as you state, that error relates to dynamic SQL and bind variables then it can not be disputed that:
    ORACLE DOESN'T AGREE WITH YOU!
    So let's try it my way and hypothesize that Oracle is correct (see rule #1 above).
    Then by definition this statement by Oracle is correct
    >
    ORA-01006: bind variable does not exist
    >
    And that should immediately raise this question:
    1. where might there be a bind variable that does not exist?
    which leads to a prerequisite question:
    2. where are ALL of the bind variables that might be being used?
    Question #2 is where you need to start your search. Here are at least five possibilities (there are more)
    1. your code - this should be easiest to check and you state that your 'anonymous' block does not have any.
    2. a table trigger - triggers that use the :NEW, :OLD or :PARENT pseudocolumns. Those psuedocolumns are BIND variables and the trigger code that uses them is, by definition, dynamic sql.
    3. a pl/sql package/function/procedure - any of these might be being called from trigger code or a view that is involved in the transaction. Any of these could take a parameter and/or use bind variables and cause your problem if that bind variable does 'not exist'.
    4. a functional index - can also trigger code from #3 above
    5. an audit trigger that logs the audit activity that your user or your code is performing. This code could be trying to use a SYS_CONTEXT environment variable that has not been created and cause a 'bind variable does not exist' error.
    See rule #1 - Oracle is CORRECT. Until you have identified and examined ALL of the code (not just your anonymous block) being executed and ruled it out you should continue with the hypotheses that Oracle is CORRECT.
    In the (extremely) unlikely event that you can show that Oracle is NOT correct you should file a SOR with Oracle.

  • [Solved] The requested object does not exist. (Exception from HRESULT: 0x80010114)

    I have a 8 node cluster with Hyper-V, which will be 10 nodes when it's finally done.
    Recently I've been try to add nodes and though that went fine, after about a week I could not open the Failover Cluster Manager anymore.
    After some checking I found out that the latest added node was giving problems.
    VM's on the node still run and function properly, but most Powershell commands result in a "The requested object does not exist. (Exception from HRESULT: 0x80010114)".
    I can suspend the node with Suspend-ClusterNode, but draining roles was unsuccesful in one case.
    In the other there were no VM's on the node so suspending went fine.
    What I did find out was that when I tried to ping the node from another, proper functioning node, it took a while before the pinging started. It felt like the interface had to come back online on the problem node.
    After that, I could add the cluster to the Failover Cluster Manager. However, Powershell commands still give a 0x80010114 error or a CIM error for when I use Get-NetAdapter.
    A reboot resolves the problem, but only for about a week.
    I know there is a topic with the same title already, but the wbemtest en rollup update "answer" is totally unclear to me why I should change something with wbemtest, or why to install updates that to me have nothing to do with this problem.
    Before I did the ping test from a functioning node I pinged my DC and another node from the problem node just fine.
    No waiting at all.
    The cluster has three networks. Management (host only), Live Migration and iSCSI (also a VMSwitch for certain VM's).
    I have no idea where to look. Evenviewer doesn't give me anything I can work with that I can find...

    Hi,
    Are you using the HP servers? It seems is the HP Nic team service was causing the issue, please try to
     disabled the HP NIC team service from services and restarted the WMI service.
    The related third party information:
    Advisory: (Revision) HP ProLiant Servers - Systems Running Microsoft Windows Server 2012 or 2012 R2 May Experience a Memory Leak Up To 5 Mb/ Hour for Some NIC Teaming Configurations
    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_ba847bafb2a2d782fcbb0710b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-c04209163-2%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.tpst=ba847bafb2a2d782fcbb0710b053ce01&ac.admitted=1401176219136.876444892.199480143
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Object does not exist :  MESSAGE OL 826 - Production issue

    R/3 release 4.6C
    Transaction: FB03
    Custom WF:  Triggering events: FIPP-CREATE  and FIPP-COMPLETED
    When we try to post a document (journal) the workflow gets triggered and reaches the approver. The approver approves it and then it gets posted.
    Here in this case, after the approval the workflow running into error with u201Cmessage OL 826 Object does not existu201D
    When I click on the message I get this information
    Object does not exist   :   Message no. OL 826                                                    
    Diagnosis :   You tried to create an instance of the object type EMPLOYEET with the
                        key 1234520080603. No instance of this kind exists.                   
                    PERNR u2013 12345
         Date      - 03.06.2008
    I checked this using the FM P_EMPLOYEE_CHECKEXISTENCE and it is working fine there. This FM is used in EMPLOYEET object for existence check.
    Initially I thought the problem was with document and the buffer but after checking u201Cdiagnosisu201D message, it confirms me that this is related to Employee.
    This is happening only to one employee and all other have NO issues.
    I have checked with HR team and they reckon everything is fine from their side.
    Since this is in Prod I am unable to debug and test.
    I was looking into the previous forums to find the solution but couldnu2019t find RIGHT one. Could you please suggest any solution for this ?
    Your help greatly appreciated.
    Sreethan
    Edited by: SAP User on Jun 12, 2008 12:13 PM

    Dear Mike/Martin,
            Could you please explain a bit about the authorization problem?
            PERNR    A, B, C, and D do the posting the docs through FB01 and PERNR  X usually do the approvals. the problem is happening onlyl with PERNR A ... if the approver has the auth problem then it could be same issue with other...  please correct me if I am wrong.
        As Martin suggested I have contacted HR team but they say .... they dont see anything different or changes for this EMP.  The personal record is coming from the EVENT FIPP-CREATE or COMPLETED so there is no manual interaction.
    Just guessing: if this is the problem for all the employees then what could be the reason ? guessing that in random it is happening to this emp. He has posted 6 docs....all of them have the same issue. I checked last 3 months records and I did see Couple of workflows in last 3 months with the same error....  so just thinking if this is the problem with all emp happens onlly ramdomly.
    Thoughts ??
    Thanks & Regards,
    Sreethan

Maybe you are looking for

  • Error in client import

    hi Experts,    here i need some help for my present issue about client import; i finished client export with warnings after i copied cofiles/data files from source to target system in my target system we have 3 clients 333,222,444 i need to copy into

  • Kt4 ultra bios

    have a strange paradox regarding disturbing message at boot up. when i boot my system i recieve a message: "no drive attached to fast track controller.  no bios detected.." i love msi boards and have used this forum in past very sucessfully with the

  • Error in Control record

    Hi All,           i used to work on US payroll all these days in my IDES, but today when i was working with india specific, when i am creating the control record, and entering the payroll period as 01 2010, it is not showing it as 01.04.2010 instead

  • How to setup a live USB stick using the latest archlinux 201405

    Hello, long time reader, first time poster.  I recently purchased a new computer, and I would like to setup arch linux as host OS, so I can see if I could build a LFS system from the Arch Linux live USB drive.  When I run the following command "dd if

  • Increasing size of installation

    I "pacman -Syu"ed today and got some nice info about the update: 100 mb to download and 300 mb to install. Great! But could i find out how much space my arch installation increases by this update? It's not like my installation will be 300 mb bigger a