General Error message using Kubota Actions?

I keep getting a "general error message" when attempting to use an action from my Kubota Dashboard. I'm using CS6 version 13.0.6 on a Mac computer. Anyone familiar with this issue? It works fine on my older laptop using CS6 version 13.0 and same Kubota Action palette.

Now my angles are out of sync and I can only see 2 at a time in the viewer window when there are supposed to be 3 but it switches between which 2 it wants to show. I have only a little experience with the multiclip settings. Is there something I need to do when re-opening a project with multiclip?

Similar Messages

I'm getting a general error message then out of memory trying to add a new sequence

Anyone know how to fix?? i am getting a general error message and then out of memory when adding a new squence?? Help!

The General Error warning is usually associated with incompatible files.
Out of Memory can be caused by corrupted clips, incompatible files and still images that use a color mode other than RGB.

Missing Render files, won't play, General Error message

I have Final Cut Pro 5.0.4 on my Mac 1.8 Ghz Power PC G5, using Mac OS 10.4.10.
I just opened a Final Cut Pro project and got a message that several render files were offline. No idea how that happened, and I couldn't find them to reconnect. Now, when I try to play the video, it stops and a "General Error" message comes up.
I tried re-rendering the whole thing,and reconnected all my media files, but it still won't play. Any ideas on how to save my project?

There are just too many possibilities for us to start guessing. Try searching for GENERAL ERROR and MISSING RENDER FILES, both topics get posted often so you'll find several suggestions and possible causes. However, not many people bother to close their threads around here so there's no way to know if any of the information we passed on was of any help.
FCP 4 and 5 had the odd super-power to make files disappear as if they had never existed. General Error often indicates a corrupt project file so try to open one of your AutoSaves.
bogiesan

Need help with General Error message

I am in desperate help on trying to capture video from my camera and I keep getting a General Error message.
I'm using FCE HD 3.0
Camera is Panasonic DVC60
I've hooked up the camera, named the project, clicked Capture, the camera window opens
Now I've tried 2 different ways, 1) start video and hit Capture Now, It gives me the General Error.
2) I've restarted everything, in the Capture window, I've set in and out points, clicked capture Clip, General Error message.
What is wrong? Please help!

Through away the QuickTime player from the Applications folder.
Go to Hard drive/Library/Receipts and throw away the QuickTime receipts.
http://www.apple.com/support/downloads/quicktime72formac.html
Trash the preferences like this
http://www.fcpbook.com/Misc1.html

General Error message when rendering after opening FCP4 project in FCP5

Hi,
we're are having trouble with our FCP 4.5 project after opeining it in FCP5. When trying to render it comes up with "General Error" message and won't render the sequence. It also sometimes simply stops rendering without the message. Can anyone help? thanks

Update the version of FCP you're attempting to use as far as it will go for starters. There's no bug I know of that would cause this, so it's more likely an edgy media file getting in the way.
Try rendering just a section at a time and see if you can narrow down the files that may be causing your error.
Jerry

'General Error' message when rendering purchased footage

Hi folks,
I just received some royalty-free footage in the mail which I ordered awhile back.
I'm finding that some of the clips import and render fine, while others import fine but give a 'General Error' message when I try to render. In essence, I'm able to use only some of the clips.
I actually have footage from TWO DIFFERENT companies, so I'm thinking the problem is not with the footage but with Final Cut Express's ability to render the files. Has anybody else gotten this 'General Error' message when trying to render royalty-free, purchased footage?
Any suggestions as to what the problem might be and how to fix it?
Thanks very much!
Vic

Hmm....if they're HD, try using MPEG Streamclip (free) and see if you can open them, and convert to Quicktime (command-E in Streamclip) using the Apple Intermediate Codec for your codec. What frame size are they? 1280x720? 1920x1080? Hopefully they are one of those standard sizes.
Once you have a converted file (which by the way will be much larger than your downloaded purchased files), then you can import them into FCE, but before doing so, make sure you go to Easy Setup and select the preset that matches the footage (for example, if it's 1920x1080 and 30fps, then in Easy Setup select the HD popup then under "Use" select the Apple Intermediate Codec 1920x1080i60 preset.) Then create a new empty sequence, then import your files.

Encore DVD 2.0 _ General Error Message

I have just completed my first project w/Encore and when I checked the project there were no errors. However, once I start to build the DVD I receive a "General Error Message" and the build is aborted. I am at my wits end trying to determine why I receive such a message and if anyone can help I would be most appreciative.

Ah hah! Well, looks like it has something to do with my custom menu. I created a project and built it pretty much the same way as the one with issues, but used one of the menus that came with Encore... and it worked fine.
So... there still remains the question of the "incompatible media" error, and I really think it is just that maybe Encore doesn't like DVD+R DL's... or something along those lines. My burner likes them just fine with other apps (which BTW, I've uninstalled all of through this process). I would still like to know the answer to that question.
But more than anything
I REALLY WANT TO USE MY CUSTOM MENU! Any chance I could get to someone and have them look at it, maybe you could tell me where I went wrong? Before I created it I read a lot of material on the subject, and to the best of my knowledge I followed all of the guidelines. I spent
A LOT of time building them, being the n00b that I am. :P
If you're able and willing, here's the
main menu and the
chapter menu.
Right click and choose "save target as...", or you'll probably end up with jiberish in your browser. :-|
Thanks for your help!!!

General Error Message Won't Let Me Save

Hello,
I was editing an HD video earlier and I switched my audio/video settings to sequence preset DVCPRO HD - 720p24 - my capture present to DV NTSC 48 Khz (since im not capturing. i pulled files off an external hard drive - my device control preset was on SONY HDV FireWire. My video playback was on apple firewire DVCPRO NSTC 720x480. I opened another project and switched my user settings to regular DV NTSC. when I got back on my HD video, it showed that I needed unexpected rendering. When I rendered it gave the "general error" message. I had to select each clip that needed rendering and move it a little, then re render the selection. when I went to save the project it gave me the same "general error" message. I need to export this project to qucktime ASAP to put on a DVD. what should I do? pleeeease help......
thanks in advance.
and am I royally screwed????

sounds like you have some corruption going on, or perhaps a permissions issue (though I think that's less likely). Here are some things I'd try.
Create a new sequence with the proper settings for your footage. Copy all the clips in your old sequence and paste into the new sequence.
Create a new project with a new sequence. Copy and paste the clips of old sequence into the new sequence of the new project. Save As and give it a new file name.
Check the pathway to your Render folder and your Save folder. Make sure that permissions allow for READ AND WRITE all the way down. In other words, if your render folder is in:
Harddrive/FCP/Render
Then make sure all three have READ WRITE permissions applied. Do this by selecting them one by one and hitting CMD+I for info. Then look at the permissions.
Hopefully one of those options will help.
Andy

General Error Message When Installing Flash Player on Mac

I have a new MacBook Pro. I have OS 10.8.2. I cannot get FlashPlayer to download. I have tried uninstalling and reinstalling Adobe Flash Player 11 from the Adobe website. Doesn't work. Every time I try to download, I get an error message that says "Error: General Installation Error" Can someone PLEASE help? I've spent hours with this and am very frustrated.

Thank you for your reply. I am running Safari, and I have tried it with
the browser closed and open, and same result. Here's the string:
1/29/13 9:14:23.111 AM coreservicesd[72]: Application App:"Install
Adobe Flash Player" @ 0x0x7ffa02372980 tried to be
brought forward, but isn't in fPermittedFrontASNs ( (
ASN:0x0-0x4fc4fc:) ), so denying.
1/29/13 9:14:23.111 AM WindowServer[98]: Failed setting
the front application to Install Adobe Flash Player, psn 0x0-0x4fb4fb,
securitySessionID=0x186f3, err=-13066
1/29/13 9:16:36.000 AM kernel[0]: HFS: Vol: Flash Player Very Low Disk:
freeblks: 0, dangerlimit: 84
1/29/13 9:17:17.590 AM sudo[6366]: Aaron : TTY=unknown ; PWD=/ ;
USER=Aaron ; COMMAND=/usr/bin/open
http://get.adobe.com/flashplayer/completion/aih/?exitcode=255&type=install
1/29/13 9:31:50.494 AM coreservicesd[72]: Application App:"Install
Adobe Flash Player" @ 0x0x7ffa0141e3c0 tried to be
brought forward, but isn't in fPermittedFrontASNs ( (
ASN:0x0-0x518518:) ), so denying.
1/29/13 9:31:50.494 AM WindowServer[98]: Failed setting
the front application to Install Adobe Flash Player, psn 0x0-0x517517,
securitySessionID=0x186f3, err=-13066
1/29/13 9:33:52.000 AM kernel[0]: HFS: Vol: Flash Player Very Low Disk:
freeblks: 0, dangerlimit: 84
1/29/13 9:35:32.014 AM sudo[6521]: Aaron : TTY=unknown ; PWD=/ ;
USER=Aaron ; COMMAND=/usr/bin/open
http://get.adobe.com/flashplayer/completion/aih/?exitcode=255&type=install
1/29/13 9:44:32.000 AM kernel[0]: HFS: Vol: Flash Player Very Low Disk:
freeblks: 0, dangerlimit: 3
1/29/13 9:46:55.473 AM coreservicesd[72]: Application App:"Adobe Flash
Player Install Manager" @ 0x0x7ffa01418520 tried to be
brought forward, but isn't in fPermittedFrontASNs ( (
ASN:0x0-0x545545:) ), so denying.
1/29/13 9:46:55.474 AM WindowServer[98]: Failed setting
the front application to Adobe Flash Player Install Manager, psn
0x0-0x543543, securitySessionID=0x186f3, err=-13066
1/29/13 9:46:55.784 AM authexec[6588]: executing /Library/Application
Support/Adobe/Flash Player Install Manager/fpsaud
1/29/13 10:37:02.258 AM coreservicesd[72]: Application App:"Install
Adobe Flash Player" @ 0x0x7ffa02123b30 tried to be
brought forward, but isn't in fPermittedFrontASNs ( (
ASN:0x0-0x57d57d:) ), so denying.
1/29/13 10:37:02.258 AM WindowServer[98]: Failed setting
the front application to Install Adobe Flash Player, psn 0x0-0x57c57c,
securitySessionID=0x186f3, err=-13066
1/29/13 10:39:02.000 AM kernel[0]: HFS: Vol: Flash Player Very Low
Disk: freeblks: 0, dangerlimit: 84
1/29/13 10:39:27.431 AM sudo[6839]: Aaron : TTY=unknown ; PWD=/ ;
USER=Aaron ; COMMAND=/usr/bin/open
http://get.adobe.com/flashplayer/completion/aih/?exitcode=255&type=install
1/29/13 2:54:59.429 PM coreservicesd[72]: Application App:"Adobe Flash
Player Install Manager" @ 0x0x7ffa01418520 tried to be
brought forward, but isn't in fPermittedFrontASNs ( (
ASN:0x0-0x597597:) ), so denying.
1/29/13 2:54:59.429 PM WindowServer[98]: Failed setting
the front application to Adobe Flash Player Install Manager, psn
0x0-0x594594, securitySessionID=0x186f3, err=-13066
1/29/13 2:54:59.740 PM authexec[6892]: executing /Library/Application
Support/Adobe/Flash Player Install Manager/fpsaud
1/29/13 3:04:55.770 PM coreservicesd[72]: Application App:"Install
Adobe Flash Player" @ 0x0x7ffa014417d0 tried to be
brought forward, but isn't in fPermittedFrontASNs ( (
ASN:0x0-0x5b65b6:) ), so denying.
1/29/13 3:04:55.770 PM WindowServer[98]: Failed setting
the front application to Install Adobe Flash Player, psn 0x0-0x5b45b4,
securitySessionID=0x186f3, err=-13066
1/29/13 3:06:56.000 PM kernel[0]: HFS: Vol: Flash Player Very Low Disk:
freeblks: 0, dangerlimit: 84
I look forward to your response.
Hilary
In a message dated 1/29/2013 6:27:35 P.M. Central Standard Time,
[email protected] writes:
Re: General Error Message When Installing Flash Player on Mac
created by Chris Campbell (http://forums.adobe.com/people/chris.campbell)
in Installing Flash Player - View the full discussion
(http://forums.adobe.com/message/5032761#5032761)

To display a continuos Error Message using BADI

Hi Everybody,
                    There's a transaction that makes use of classes and interfaces to display an ALV grid with input enabled frames and fields. There's a need to display an error message using a specified BADI method, which gets triggered after the user enters the input. The error message is working fine for the first time.<b>But when i'm trying to enter the same input and press enter after the error message, the transaction is getting closed. How can i display the same error message, until and unless the user enters the correct input ?</b> I've tried to trace the control using the debugger after the enter is pressed, but the debugger is also getting closed and the control is coming out of the transaction. Help me out in displaying the error message.

Hi,
Open the interface and go to the Methods tab.
Select the Method and click on Parameters.
In the method parameters, declare a variable
RETURN      Changing      Type     ALM_ME_BAPIRET2_T.
Now, inside your code, declare   DATA : ls_return TYPE bapiret2.
and populate this RETURN table, something like:
        if not ( wa_mara-mtart eq 'SPAR' or wa_mara-mtart eq 'ZMRO' ).
    CLEAR ls_return.
    MOVE 'E' TO ls_return-type.
    MOVE 'ERR_MESSAGE' TO ls_return-id.
    MOVE '999' TO ls_return-number.
    MOVE 'Enter proper error message here' TO ls_return-message.
    INSERT ls_return INTO TABLE return.
    endif.
Then, back in your program, check if this table is empty proceed otherwise, STOP or EXIT.
Regards
Subramanian

I get a General Error message when I convert my film to Quicktime Movie.

I've compressed my film down to 24p etc etc. That worked fine. Before I did the compression there were some things I had to reconnect, did that, there was only one that didn't reconnect but the compression worked fine. Then I go to turn the film into a Quicktime Movie, I get to about 60% then I get a General Error message. Anyone have any ideas why thats happening?

Have you tried the compression with cinema tools?
make a quicktime movie of the stuff at 25 that you want to compress at 24 and go to cinema tools. make sure you create a new database at 24fps and try menu clip / comform. notice that cinema tools doesn't duplicate the clip, so it converts the one you are importing, make sure it is a copy of the original at 25

General error message

I have recently finished and edited a wedding DVD for a client.However they want now all uncut footage onto a DVD but every time i export it (sequence is only 1 hr 30 mins) it comes up with a general error message just before completing.I have also rendered all in the sequence and i have 35 gb available on the drive and there are no transitions between clips except for a dissolve on the intro and a fade out at the end.
Any advice is welcome and many thanks in advance.
Ali
G5 Imac Mac OS X (10.3.9)

Thanks for an interesting idea but allas it didn't work !!
It wouldn't export the first raw footage sequence I exported without any transittions . So I then exported it a second time but with a cross disolve at the front and a fade out at the end and all was then fine. But with the raw footage 2 sequence I'm doing now I'm still getting the " general error" message even after this little trick.... and after your trick too........
Oh well thanks for the tip.
Ali
Doe FCE work ok with OSX Tiger 10.4 ?

Send custom error message using IDoc conversion rule?

Hello,
I am using an Idoc conversion rule in BD79 to load cost centers. In my conversion rule I use a conversion exit function module to concatenate 2 specific characters and sending cost center value together and then this output value placed in the receiving cost center field. This works fine, but now I want to send a custom error message to the idoc and fail the idoc if the sending cost center value is greater than 8 digits.
Does anyone know how to send an error message or update an idoc with an error message using a conversion rule (bd79)?
Thank you,
Rhonda

Hi Rhonda,
Any luck on the below.. i have a similar issue...
Sorry to hijack your thread...

The Add-on Creative Cloud Libraries failed to install, General error message

Hi there,
My CC icon has an exclamation mark next to it and following message appears when in Apps:
"The Add-on Creative Cloud Libraries failed to install, General error message"
Any idea what could be a reason and how to sort it out?
Thanks,
Zana

Nobody can tell you anything without proper system info or other technical details.
Mylenium

Get general error message, please try again or contact support (49)

Just purchased a new HP computer with window 8.1 64 bit. Tried to download PS but the download fails. General error message states retry or contact customer support (49).

Hello,
I also get this problem.
MAC OSX 10.9.3
When I click update now it open the creative cloud tab from the menu bar where the update shows that its installed??
I have also found it difficult updating versions via MAC. Please help..

General Error message using Kubota Actions?

Similar Messages

Maybe you are looking for