General Error When Clicking On Library Assets

I just installed the library assets
and now when I click on any item in the library I get a "General Error" dialog.
How do I fix this?
Thanks,
Don

Never mind, did an uninstall of Encore (had to uninstall After Effects too, seems they share some components), reinstalled them both and both are working well.
Don

Similar Messages

C++ runtime library error when clicking on preview

Customer is getting a Microsoft Visual C++ runtime library error when clicking on "preview" tab in Xcelsius
Full error message is this:
Microsoft Visual C++ Runtime library
Runtime error!
Program: C:\program files\Business Objects\Xclesius\Xcelsius.exe
This application has requested the Runtime to terminate it in an unusual way.
Please contact application support team for more information.
This is a new install of Xcelsius, using Office 2007

Hi Pete,
Are you getting this error message for some specific dashboard or any of the file.If this is happening for some specific dashboard, then let me know if you can send me the file to take a look at it.
Thanks,
Amit.

General Error when Doing Export

I'm getting a "General Error" when exporting a sequence, both as a reference QuickTime and as a self-contained QuickTime file. The process goes along until a certain percentage (73%), and then it bails, and gives this not-very-specific "General Error" message.
I've gone into the timeline and figured what I think is 73% of the timeline, and taken a look at the media at that point, which happens to be a Motion project brought into FCP as a .mov. I've pulled out the Motion project files, re-exported it out of Motion, and put the project back in.
I've also repaired permissions, run Disk Warrior, gone from 10.4.9 > 10.4.10, and up'd my QuickTime version to 7.2.0 (Pro).
I'm using FCP 5.1.4, with Motion 2.1.2
I'm not sure what else to try, or what else to consider.

Hi,
I am also having the same "General Error" message when i am trying to export a sequence that have the setting of HDV720p30 to a QT movie using export to Quicktime Movie>using the Current Settings on the Export tab.
This project is a concert i shot with 4 cameras. I have 4 sequences for the different camera angles and since there are three tapes, i had to line them together on each of their sequence and export them to be a self contained QT movie. I am using the export to Quicktime after right clicking on the sequence.
After that i was going to import them onto FCP Project and then multiclip edit the concert. I just love Multiclip editing.
I am able to export 1 of the 4 angles have and ran into this General Errorr Message.
I have tried making a new sequence, i have also tried using compressor but did not have the patience of waiting 10 hours to export the movie and also i didn't want to see the general error message at the end of the export so i came to ask any FCP Guru out there that can guide me. thanks.

General Error when I try to out put DVD in Encore CS4

I have been trying to output a dvd from and encore project and am continually getting errors. I have imported mpg movie assets. I am working on Encore CS4 Windows XP. I get "General Error" message.
I have also tried other file formats like AVI and still got "Transcoding Failed"errors with the transcoding process, not one of the settings in Transcoding was working, that was when I went to mpg files, those are already dvd ready assets no transcoding necessary.
Any Help would be greatly appreciated.
Thank you

Thank you for responding.
I am on system Windows XP
Service Pack 3
I7 Processor
2.8 GHz, 3 GB Ram
HDD
Using 103 GB
Free Space 828 GB
Encore Project:
Simple Menu with 2 navigation buttons linked to two assets on seperate timelines.
The Assets:
mpg file Duration 0:36:40 File size 1.6 GB
mpg file Duration 0:38:47 File Size 1.8 GB
I just imported the assets as timelines, there are no chapter markers for navigation nor no editing on the timelines, I just want to output to DVD and I'm getting "General Error" When I start to build.
file fits on 4.7 DVD
DVD Transcode Settings are at "Don't Transcode"
DVD Transcode Status are at "Don't Transcode"
Hope that covers it, thank you so much for your help

Error when External Acquisition of asset F-90

Hi,
i had created entire asset accounting inclient 100 and transaported to client 400 inclueading group asset.
now when i am posting F-90 acquisition asset it is geving following error:
*Asset 6661 600002-0 is incomplete, check the asset
Message no. AAPO184
Diagnosis
The 'incomplete' indicator was set for asset 6661 600002-0 because required entries were not made.
System Response
In the standard system, the system rejects the posting to the asset and issues an error message. However, this error message can be changed in Customizing so that it is only a warning. However, if you make this change, you should be aware that it is then possible to post to the asset, although an additional account assignment is missing.
Procedure
Start report RAUNVA00 for the asset, and complete the asset's specifications. Then post the transaction again.*
can any one give me the solution
thanking you.

Dear,
Mahesh.
DO not perform cross posting. Same quesiton is asked in SAP Financials and I answered there same as Nathan & Srinu sir.
Error when External Acquisition of asset F-90 in SAP Financials.
Requesting :- If you want to post in cross Forums please close previous one and then ask in new one.
As said in message run the RAUNVA00 report in SE38 or go to AUVA T.code.
Go to Company Code for which you are facing issue , then go to Levels of completion area select there 1 to 3.
Execute and see your asset no. Then see which fields are incomplete and fill them with proper value in AS02.
Save & Run F-90.
I hope this will help you to solve the issue. If you have any doubts feel free to share.
Regards,
Pankaj A Bhalerao.

Get a "Download Error" when clicking on the "App" tab of Creative Cloud.

Get a "Download Error" when clicking on the "App" tab of Creative Cloud.

Yeah I finally had to call Adobe and some there did a screen share with me and they took care of it. I am running OSX 10.9.3 my issue was that the latex OSX update didn't communicate with the app. Like I said Adobe did a screen share with me and fixed it for me I think he just uninstalled and reinstalled and I want to say thats what took care of it.

"General Error" when I export to quicktime movie .mov

I have no idea why all of a sudden FCE4 says "General Error" when I export using quicktime movie... If i use another option like mpeg4 or other it works fine. What could be a problem?
I have lots of memory.

I made the movie self contained and it started but then stops at 10%. This isnt anything complex just a few clips edited together w/ music. I just want to upload to youtube. I have no idea what the deal is!

Page Not Found Error when clicking on Crystal Report Viewer print icon

Hi,
    I am working with ASP.NET 2.0 and crystla reportXI release2.
    I am getting "Page Can not be Found " error when clicking on Crystal Report Viewer print icon.
    Could you please tell me how to get rid of this error?
Regards,
Smitha

This sounds like a postback issue. Does your application handle postback by putting the report in session?
There is a [sample|http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/en/CrystalReports_dotNET_SDK/crsdk_samples_aspx/data/crsdk_net_tutorials_115_en.zip] to look at on our website. It was created with Crystal Reports XI R2 and Visual Studio .NET but the code will be the same.
A short pseudocode would be something like this:
Dim rptDocument As ReportDocument
If Not Me.IsPostBack or Session("Report") = Nothing Then
rptDocument = New ReportDocument
rptDocument.Load(sGlobalPath & "\myreport.rpt";)
Ludek

I always get "general error" when I change value of "Digitizer"

I tried to capture a Prores422 project by FCP6 and Kano3 card.
I changed setting of "Capture Preset Editor" to ensure capture what I needed.
I think parameter value of "Digitizer" will determine Bit Depth of the project.
The original value of "Digitizer" is "AJA 8-bit Digitizer". If I selected "AJA 10-bit Digitizer",it will pop up generel error.
If I re-select the value to "AJA 8-bit Digitizer", it will still pop up general error.
Please give me a hand.
Is bit depth (8bit or 10bit) is determined by the setting of "Digitizer"?
If yes, why does it always pop up general error when I changed it.

From the information available it appears that your install could be conflicting with a previous version or installation. I would recommend reviewing your installation logs to verify the root cause of your difficulties. You can find directions on how to review your installation logs at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.

Javascript preferences error when clicking insert

hi,
i tried looking around on the net however no solution i could see for this.
when i click insert in DW CS3 i get an error in "yy/scripts/preferences.js" error 3
i cannot see that file in my program files, how can i resolve this?
many thanks

hi,
i gave this a go however it did not resolve the issue. still error when clicking insert. only started happening past few days. cant think of what has happened to make it do it.
any other suggestions?
many thanks

Encounter "GENERAL ERROR" when rendering

What makes general error when try render certain section in the timeline and how to over come it or prevent it ?

It can be any section. In fact it occurred in my original project. In order not to spoil my original project, I started copying section by section and render it bit by bit. And I found out it can happen to any section. I discovered that there are certain parts when I add transition and render it, then the message "general error" will show. So I cannot put any transition on that part. And I have to undo it. As far as my scratch disk, I am using external hard disc 1 tb, but left only 82 gb.
Thks

Page error when clicking on #hashtag in feed

I've got an issue where if I click on a hashtag in a site feed to see the conversations, I get the below error. I'm not aware of any special permissions needed?

Below are the lines I believe relating to this problem. I'm not finding anything specific in the forums about this as yet.
03/19/2015 09:12:14.46 w3wp.exe (0x1BF0) 0x1578 SharePoint Foundation General 8nca Medium Application error when access /_layouts/15/HashTagProfile.aspx, Error=Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) at Microsoft.SharePoint.SPGlobal.HandleUnauthorizedAccessException(UnauthorizedAccessException
ex) at Microsoft.SharePoint.Library.SPRequest.GetAclForCurrentWeb(String bstrWebUrl, Boolean fRequirePermissionCheck, Object& pvarRawAcl, UInt64& lAnonymousMask) at Microsoft.SharePoint.SPWeb.GetReusableAcl(Boolean requirePermissionCheck, Boolean useCache)
at Microsoft.SharePoint.Publishing.AclCache.AddAclIfNecessary(Guid scopeId, SPSecurableObject o) at Microsoft.SharePoint.Publishing.CachedArea..ctor(PublishingWeb area, String id, String parentId, CachedUserResource title, String url, CachedUserResource description,
CachedObjectFactory f...
03/19/2015 09:12:14.46* w3wp.exe (0x1BF0) 0x1578 SharePoint Foundation General 8nca Medium ...actory) at Microsoft.SharePoint.Publishing.CachedArea.CreateCachedArea(PublishingWeb area, CachedObjectFactory factory, String parentId) at Microsoft.SharePoint.Publishing.CachedObjectFactory.CreateObject(PublishingWeb
area, String parentUrl) at Microsoft.SharePoint.Publishing.PublishingPage.IsPublishingPage(SPListItem sourceListItem) at Microsoft.SharePoint.Publishing.CachedListItem.CreateCachedListItem(SPListItem item, SPListItem alternateItem, Boolean parentIsWeb, CachedObjectFactory
factory, List`1& fieldInfo) at Microsoft.SharePoint.Publishing.CachedObjectFactory.CreateListItemFromUrl(String url, SPWeb contextWeb, Boolean enableCheckedOutItem) at Microsoft.Office.Server.Search.WebControls.SearchServerRenderer.GetCachedItemFieldValue(CacheManager
cacheManager, S... e811f49c-94b6-80f3-96a8-0040502c8b9a
03/19/2015 09:12:14.46* w3wp.exe (0x1BF0) 0x1578 SharePoint Foundation General 8nca Medium ...PWeb web, String itemUrlLink, Guid itemFieldId) at Microsoft.Office.Server.Search.WebControls.SearchServerRenderer.GetCachedItemFieldValue(String itemUrlLink, Guid
itemFieldId) at Microsoft.Office.Server.Search.WebControls.ResultScriptWebPart.get_SelectedProperties() at System.Linq.Enumerable.WhereSelectListIterator`2.MoveNext() at Microsoft.Office.Server.Search.WebControls.ScriptWebPart.Union[T](IEnumerable`1 all, IEqualityComparer`1
comparer) at Microsoft.Office.Server.Search.WebControls.DataProviderScriptWebPart.get_SelectedProperties() e811f49c-94b6-80f3-96a8-0040502c8b9a

Getting general error when saving site using "create PDF from"

I'm using Adobe Acrobat Professional 8.0.0 for Mac, trying to save websites. This started working fine, but I had to shut down in the middle of a site being saved. Now when I try to save a site using Web Capture/create PDF from I get a "general error, nothing was saved". What do I need to do, remove, replace, reinstall or whatever to get this feature working again?
Also can anyone tell me how to set the feature that saves web pages with the headers and footers showing date, time, URL, page title, etc. I often use the print feature (save to PDF) and up until a day or so ago it always saved with those headers and footers. Now they're missing, which is what prompted me to try saving entire sites, above. I remember setting these a long time ago and being able to choose what went on the left, right,header and footer, but I cannot find those settings now.
Thanks,
Michele

Well, after downloading Applejack, I am completely confused. I'm not sure I understand what will happen if I do any of these steps: see 3a.. "clean out all cache files including the Launch Services database and any cached User Pictures". What kinds of things will I lose? Can I choose only the Acrobat cache files? I don't want to have to spend hours or days resetting things as I'm in the middle of a project with a close deadline. I also don't really understand fully what will happen with all the other things they discuss. The instructions say (I just copied and pasted these):
3. Auto mode: You can let the script run through its tasks automatically by typing 'applejack auto'. If you want the machine to automatically restart at the end of its tasks, use 'applejack auto restart'. You can also tell the computer to shut down automatically at the end by using the command line 'applejack auto shutdown'.
3a. Deep Auto mode: If you want to let AppleJack clean out all cache files, including the Launch Services database and any cached User Pictures, use 'applejack AUTO' instead. Use this if you still have problems booting after running AppleJack already.
4. Interactive mode: To run through just one task, or to run the script manually, type 'applejack' and then choose tasks from the menu. Running the script in interactive mode has the benefit of giving you options for working with user level cache and preference files, not just the default system level caches and preferences. To select an option, type the highlighted number or letter associated with the action, and then hit return. Whenever you enter a choice in AppleJack, you will need to hit return for that choice to take effect.
4. Corrupted preference files are moved into a directory that will mirror the original preference directory, with (Corrupt) added to the directory name. For example, corrupt preferences files found in ~/Library/Preferences will be moved to ~/Library/Preferences (Corrupt). After running AppleJack, you'll probably want to take a look at them (and most likely throw out those folders). As of version 1.4.2, AppleJack now creates a copy of the directory tree inside the (Corrupt) folder so that if any files were deeply nested inside the original preference folder, they will be placed in an identical directory hierarchy in the new (Corrupt) folder. This way, if for any reason you would want to move a preference file back, you know where it should go.
6. AppleJack has a primitive logging mechanism. It writes a journal of most of its activity to /var/log/AppleJack.log. AppleJack will automatically reset the log the next time you run it, if the file should ever reach a size somewhat over 500k.

General Error When Opening A Project in FCE

I have read many threads on this.
My Config: FCE HD 3.51 / Intel Duo iMac
When I opened the project (both from FCE and double click), it would not open and I received a General Error. My projects are saved in a folder called FCE Projects in my documents folder on my iMacs hard drive.
I am able to open from my Auto Save - I moved this file to my desktop and renamed as the project copy - now I can open the project again.
HOWEVER - when I move this project off my desktop back into my FCE projects folder, I get the same General Error again. Other projects from the same folder open fine.
Any ideas?

Try repairing permissions and re-boot.
Al

I get "General Error" when trying to playback unrendered video, and when trying to export to my desktop and I'm not sure why.

I import video footage into Final Cut Pro 7, added some effects like motion blur and colour correction, and cannot playback the video whilst it is not rendered. I click the play button but it just says "general error". This also happens when trying to export to my desktop "general error" once again. Does anyone know what is going on?
My RT settings are:
Safe RT or Unlimited RT (I get the error on either setting)
Framerate & video quality - Dynamic
27" iMac i7 @ 3.4GHz
4GB Ram
2GB Radeon 6970m

Hmmmm it seems to be just that file. The rest of my files are fine. I tweaked some settings and tried other files and it worked, so maybe it was just me, I am very new to Final Cut after all. Turns out I'm OK now! Thanks anyway!

General Error When Clicking On Library Assets

Similar Messages

Maybe you are looking for